diff options
| author |   Max Krummenacher <max.krummenacher@toradex.com> | 2022-04-11 17:22:23 +0200 |
|---|---|---|
| committer |   Shawn Guo <shawnguo@kernel.org> | 2022-04-18 16:27:14 +0800 |
| commit | 91dbd54ec55d3521f32beefddb64e81dc49e4abb (patch) | |
| tree | 3103f519fa494d88b5828b0c9d1c86a0bd700c57 /arch/arm/boot/dts/imx6qdl-colibri.dtsi | |
| parent | ARM: dts: imx: align SPI NOR node name with dtschema (diff) | |
| download | wireguard-linux-91dbd54ec55d3521f32beefddb64e81dc49e4abb.tar.xz wireguard-linux-91dbd54ec55d3521f32beefddb64e81dc49e4abb.zip | |
ARM: dts: imx6dl-colibri: Drop dedicated v1.1 device tree
Drop Colibri V1.1 device tree, this is just a duplicate of Colibri V1.0
with the possibility to use SD cards in UHS mode if the carrier board
does not have 3.3V pull up resistor.
The dedicated device tree kept the feature switched of by setting
the no-1-8-v property and thus does not offer anything different
than what the regular device tree does.
Thus drop the dedicated device tree and merge the preparation to
allow enabling the feature should a carrier without pull ups
be used into the regular device tree.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-colibri.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-colibri.dtsi | 29 |
1 files changed, 27 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 4e2a309c93fa..16d38bc78b2a 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -370,11 +370,14 @@ /* Colibri MMC */ &usdhc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ disable-wp; - vqmmc-supply = <®_module_3v3>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <&vgen3_reg>; bus-width = <4>; no-1-8-v; status = "disabled"; @@ -692,6 +695,28 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |