powerpc/mm/radix: Create separate mappings for hot-plugged memory

To enable memory unplug without splitting kernel page table
mapping, we force the max mapping size to the LMB size. LMB
size is the unit in which hypervisor will do memory add/remove
operation.

Pseries systems supports max LMB size of 256MB. Hence on pseries,
we now end up mapping memory with 2M page size instead of 1G. To improve
that we want hypervisor to hint the kernel about the hotplug
memory range. That was added that as part of

commit b6eca183e23e ("powerpc/kernel: Enables memory
hot-remove after reboot on pseries guests")

But PowerVM doesn't provide that hint yet. Once we get PowerVM
updated, we can then force the 2M mapping only to hot-pluggable
memory region using memblock_is_hotpluggable(). Till then
let's depend on LMB size for finding the mapping page size
for linear range.

With this change KVM guest will also be doing linear mapping with
2M page size.

The actual TLB benefit of mapping guest page table entries with
hugepage size can only be materialized if the partition scoped
entries are also using the same or higher page size. A guest using
1G hugetlbfs backing guest memory can have a performance impact with
the above change.

Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Fold in fix from Aneesh spotted by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com

1 files changed, 80 insertions, 11 deletions

diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index d5a01b9aadc9..c5bf2ef73c36 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/string_helpers.h>
+#include <linux/memory.h>
 
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
@@ -33,6 +34,7 @@
 
 unsigned int mmu_pid_bits;
 unsigned int mmu_base_pid;
+unsigned int radix_mem_block_size __ro_after_init;
 
 static __ref void *early_alloc_pgtable(unsigned long size, int nid,
 			unsigned long region_start, unsigned long region_end)
@@ -265,6 +267,7 @@ static unsigned long next_boundary(unsigned long addr, unsigned long end)
 
 static int __meminit create_physical_mapping(unsigned long start,
 					     unsigned long end,
+					     unsigned long max_mapping_size,
 					     int nid, pgprot_t _prot)
 {
 	unsigned long vaddr, addr, mapping_size = 0;
@@ -278,6 +281,8 @@ static int __meminit create_physical_mapping(unsigned long start,
 		int rc;
 
 		gap = next_boundary(addr, end) - addr;
+		if (gap > max_mapping_size)
+			gap = max_mapping_size;
 		previous_size = mapping_size;
 		prev_exec = exec;
 
@@ -328,8 +333,9 @@ static void __init radix_init_pgtable(void)
 
 	/* We don't support slb for radix */
 	mmu_slb_size = 0;
+
 	/*
-	 * Create the linear mapping, using standard page size for now
+	 * Create the linear mapping
 	 */
 	for_each_memblock(memory, reg) {
 		/*
@@ -345,6 +351,7 @@ static void __init radix_init_pgtable(void)
 
 		WARN_ON(create_physical_mapping(reg->base,
 						reg->base + reg->size,
+						radix_mem_block_size,
 						-1, PAGE_KERNEL));
 	}
 
@@ -485,6 +492,57 @@ static int __init radix_dt_scan_page_sizes(unsigned long node,
 	return 1;
 }
 
+#ifdef CONFIG_MEMORY_HOTPLUG
+static int __init probe_memory_block_size(unsigned long node, const char *uname, int
+					  depth, void *data)
+{
+	unsigned long *mem_block_size = (unsigned long *)data;
+	const __be64 *prop;
+	int len;
+
+	if (depth != 1)
+		return 0;
+
+	if (strcmp(uname, "ibm,dynamic-reconfiguration-memory"))
+		return 0;
+
+	prop = of_get_flat_dt_prop(node, "ibm,lmb-size", &len);
+	if (!prop || len < sizeof(__be64))
+		/*
+		 * Nothing in the device tree
+		 */
+		*mem_block_size = MIN_MEMORY_BLOCK_SIZE;
+	else
+		*mem_block_size = be64_to_cpup(prop);
+	return 1;
+}
+
+static unsigned long radix_memory_block_size(void)
+{
+	unsigned long mem_block_size = MIN_MEMORY_BLOCK_SIZE;
+
+	/*
+	 * OPAL firmware feature is set by now. Hence we are ok
+	 * to test OPAL feature.
+	 */
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		mem_block_size = 1UL * 1024 * 1024 * 1024;
+	else
+		of_scan_flat_dt(probe_memory_block_size, &mem_block_size);
+
+	return mem_block_size;
+}
+
+#else   /* CONFIG_MEMORY_HOTPLUG */
+
+static unsigned long radix_memory_block_size(void)
+{
+	return 1UL * 1024 * 1024 * 1024;
+}
+
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
+
 void __init radix__early_init_devtree(void)
 {
 	int rc;
@@ -493,17 +551,27 @@ void __init radix__early_init_devtree(void)
 	 * Try to find the available page sizes in the device-tree
 	 */
 	rc = of_scan_flat_dt(radix_dt_scan_page_sizes, NULL);
-	if (rc != 0)  /* Found */
-		goto found;
+	if (!rc) {
+		/*
+		 * No page size details found in device tree.
+		 * Let's assume we have page 4k and 64k support
+		 */
+		mmu_psize_defs[MMU_PAGE_4K].shift = 12;
+		mmu_psize_defs[MMU_PAGE_4K].ap = 0x0;
+
+		mmu_psize_defs[MMU_PAGE_64K].shift = 16;
+		mmu_psize_defs[MMU_PAGE_64K].ap = 0x5;
+	}
+
 	/*
-	 * let's assume we have page 4k and 64k support
+	 * Max mapping size used when mapping pages. We don't use
+	 * ppc_md.memory_block_size() here because this get called
+	 * early and we don't have machine probe called yet. Also
+	 * the pseries implementation only check for ibm,lmb-size.
+	 * All hypervisor supporting radix do expose that device
+	 * tree node.
 	 */
-	mmu_psize_defs[MMU_PAGE_4K].shift = 12;
-	mmu_psize_defs[MMU_PAGE_4K].ap = 0x0;
-
-	mmu_psize_defs[MMU_PAGE_64K].shift = 16;
-	mmu_psize_defs[MMU_PAGE_64K].ap = 0x5;
-found:
+	radix_mem_block_size = radix_memory_block_size();
 	return;
 }
 
@@ -855,7 +923,8 @@ int __meminit radix__create_section_mapping(unsigned long start,
 		return -1;
 	}
 
-	return create_physical_mapping(__pa(start), __pa(end), nid, prot);
+	return create_physical_mapping(__pa(start), __pa(end),
+				       radix_mem_block_size, nid, prot);
 }
 
 int __meminit radix__remove_section_mapping(unsigned long start, unsigned long end)