Merge tag 'v3.15-rc1' into patchwork

Linux 3.15-rc1

* tag 'v3.15-rc1': (12180 commits)
  Linux 3.15-rc1
  mm: Initialize error in shmem_file_aio_read()
  cifs: Use min_t() when comparing "size_t" and "unsigned long"
  sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue
  powerpc: Don't try to set LPCR unless we're in hypervisor mode
  futex: update documentation for ordering guarantees
  ceph: fix pr_fmt() redefinition
  vti: don't allow to add the same tunnel twice
  gre: don't allow to add the same tunnel twice
  drivers: net: xen-netfront: fix array initialization bug
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  pktgen: be friendly to LLTX devices
  r8152: check RTL8152_UNPLUG
  net: sun4i-emac: add promiscuous support
  net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  blackfin: cleanup board files
  bf609: clock: drop unused clock bit set/clear functions
  Blackfin: bf537: rename "CONFIG_ADT75"
  ...

16 files changed, 438 insertions, 216 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cd6950fd8caf..96918e1f26a3 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -140,3 +140,54 @@ config VF_PIT_TIMER
 	bool
 	help
 	  Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+
+config SYS_SUPPORTS_SH_CMT
+        bool
+
+config SYS_SUPPORTS_SH_MTU2
+        bool
+
+config SYS_SUPPORTS_SH_TMU
+        bool
+
+config SYS_SUPPORTS_EM_STI
+        bool
+
+config SH_TIMER_CMT
+	bool "Renesas CMT timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	default SYS_SUPPORTS_SH_CMT
+	help
+	  This enables build of a clocksource and clockevent driver for
+	  the Compare Match Timer (CMT) hardware available in 16/32/48-bit
+	  variants on a wide range of Mobile and Automotive SoCs from Renesas.
+
+config SH_TIMER_MTU2
+	bool "Renesas MTU2 timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	default SYS_SUPPORTS_SH_MTU2
+	help
+	  This enables build of a clockevent driver for the Multi-Function
+	  Timer Pulse Unit 2 (TMU2) hardware available on SoCs from Renesas.
+	  This hardware comes with 16 bit-timer registers.
+
+config SH_TIMER_TMU
+	bool "Renesas TMU timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	default SYS_SUPPORTS_SH_TMU
+	help
+	  This enables build of a clocksource and clockevent driver for
+	  the 32-bit Timer Unit (TMU) hardware available on a wide range
+	  SoCs from Renesas.
+
+config EM_TIMER_STI
+	bool "Renesas STI timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	default SYS_SUPPORTS_EM_STI
+	help
+	  This enables build of a clocksource and clockevent driver for
+	  the 48-bit System Timer (STI) hardware available on a SoCs
+	  such as EMEV2 from former NEC Electronics.
+
+config CLKSRC_QCOM
+	bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index c7ca50a9c232..98cb6c51aa87 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,6 +1,5 @@
 obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
-obj-$(CONFIG_X86_CYCLONE_TIMER)	+= cyclone.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o
 obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC)	+= cs5535-clockevt.o
@@ -21,6 +20,7 @@ obj-$(CONFIG_ARCH_MARCO)	+= timer-marco.o
 obj-$(CONFIG_ARCH_MOXART)	+= moxart_timer.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs_timer.o
 obj-$(CONFIG_ARCH_PRIMA2)	+= timer-prima2.o
+obj-$(CONFIG_ARCH_U300)		+= timer-u300.o
 obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
 obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
@@ -32,8 +32,10 @@ obj-$(CONFIG_CLKSRC_EFM32)	+= time-efm32.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
 obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
+obj-$(CONFIG_CLKSRC_QCOM)	+= qcom-timer.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o
 obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST)	+= dummy_timer.o
+obj-$(CONFIG_ARCH_KEYSTONE)		+= timer-keystone.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 95fb944e15ee..57e823c44d2a 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -277,6 +277,7 @@ static void __arch_timer_setup(unsigned type,
 			clk->set_next_event = arch_timer_set_next_event_phys;
 		}
 	} else {
+		clk->features |= CLOCK_EVT_FEAT_DYNIRQ;
 		clk->name = "arch_mem_timer";
 		clk->rating = 400;
 		clk->cpumask = cpu_all_mask;
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 63f176de0d02..49fbe2847c84 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/of_address.h>
@@ -52,6 +53,8 @@
 #define TTC_CNT_CNTRL_DISABLE_MASK	0x1
 
 #define TTC_CLK_CNTRL_CSRC_MASK		(1 << 5)	/* clock source */
+#define TTC_CLK_CNTRL_PSV_MASK		0x1e
+#define TTC_CLK_CNTRL_PSV_SHIFT		1
 
 /*
  * Setup the timers to use pre-scaling, using a fixed value for now that will
@@ -63,6 +66,8 @@
 #define CLK_CNTRL_PRESCALE_EN	1
 #define CNT_CNTRL_RESET		(1 << 4)
 
+#define MAX_F_ERR 50
+
 /**
  * struct ttc_timer - This definition defines local timer structure
  *
@@ -82,6 +87,8 @@ struct ttc_timer {
 		container_of(x, struct ttc_timer, clk_rate_change_nb)
 
 struct ttc_timer_clocksource {
+	u32			scale_clk_ctrl_reg_old;
+	u32			scale_clk_ctrl_reg_new;
 	struct ttc_timer	ttc;
 	struct clocksource	cs;
 };
@@ -229,32 +236,89 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
 			struct ttc_timer_clocksource, ttc);
 
 	switch (event) {
-	case POST_RATE_CHANGE:
+	case PRE_RATE_CHANGE:
+	{
+		u32 psv;
+		unsigned long factor, rate_low, rate_high;
+
+		if (ndata->new_rate > ndata->old_rate) {
+			factor = DIV_ROUND_CLOSEST(ndata->new_rate,
+					ndata->old_rate);
+			rate_low = ndata->old_rate;
+			rate_high = ndata->new_rate;
+		} else {
+			factor = DIV_ROUND_CLOSEST(ndata->old_rate,
+					ndata->new_rate);
+			rate_low = ndata->new_rate;
+			rate_high = ndata->old_rate;
+		}
+
+		if (!is_power_of_2(factor))
+				return NOTIFY_BAD;
+
+		if (abs(rate_high - (factor * rate_low)) > MAX_F_ERR)
+			return NOTIFY_BAD;
+
+		factor = __ilog2_u32(factor);
+
 		/*
-		 * Do whatever is necessary to maintain a proper time base
-		 *
-		 * I cannot find a way to adjust the currently used clocksource
-		 * to the new frequency. __clocksource_updatefreq_hz() sounds
-		 * good, but does not work. Not sure what's that missing.
-		 *
-		 * This approach works, but triggers two clocksource switches.
-		 * The first after unregister to clocksource jiffies. And
-		 * another one after the register to the newly registered timer.
-		 *
-		 * Alternatively we could 'waste' another HW timer to ping pong
-		 * between clock sources. That would also use one register and
-		 * one unregister call, but only trigger one clocksource switch
-		 * for the cost of another HW timer used by the OS.
+		 * store timer clock ctrl register so we can restore it in case
+		 * of an abort.
 		 */
-		clocksource_unregister(&ttccs->cs);
-		clocksource_register_hz(&ttccs->cs,
-				ndata->new_rate / PRESCALE);
-		/* fall through */
-	case PRE_RATE_CHANGE:
+		ttccs->scale_clk_ctrl_reg_old =
+			__raw_readl(ttccs->ttc.base_addr +
+					TTC_CLK_CNTRL_OFFSET);
+
+		psv = (ttccs->scale_clk_ctrl_reg_old &
+				TTC_CLK_CNTRL_PSV_MASK) >>
+				TTC_CLK_CNTRL_PSV_SHIFT;
+		if (ndata->new_rate < ndata->old_rate)
+			psv -= factor;
+		else
+			psv += factor;
+
+		/* prescaler within legal range? */
+		if (psv & ~(TTC_CLK_CNTRL_PSV_MASK >> TTC_CLK_CNTRL_PSV_SHIFT))
+			return NOTIFY_BAD;
+
+		ttccs->scale_clk_ctrl_reg_new = ttccs->scale_clk_ctrl_reg_old &
+			~TTC_CLK_CNTRL_PSV_MASK;
+		ttccs->scale_clk_ctrl_reg_new |= psv << TTC_CLK_CNTRL_PSV_SHIFT;
+
+
+		/* scale down: adjust divider in post-change notification */
+		if (ndata->new_rate < ndata->old_rate)
+			return NOTIFY_DONE;
+
+		/* scale up: adjust divider now - before frequency change */
+		__raw_writel(ttccs->scale_clk_ctrl_reg_new,
+				ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+		break;
+	}
+	case POST_RATE_CHANGE:
+		/* scale up: pre-change notification did the adjustment */
+		if (ndata->new_rate > ndata->old_rate)
+			return NOTIFY_OK;
+
+		/* scale down: adjust divider now - after frequency change */
+		__raw_writel(ttccs->scale_clk_ctrl_reg_new,
+				ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+		break;
+
 	case ABORT_RATE_CHANGE:
+		/* we have to undo the adjustment in case we scale up */
+		if (ndata->new_rate < ndata->old_rate)
+			return NOTIFY_OK;
+
+		/* restore original register value */
+		__raw_writel(ttccs->scale_clk_ctrl_reg_old,
+				ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+		/* fall through */
 	default:
 		return NOTIFY_DONE;
 	}
+
+	return NOTIFY_DONE;
 }
 
 static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
@@ -321,25 +385,12 @@ static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
 
 	switch (event) {
 	case POST_RATE_CHANGE:
-	{
-		unsigned long flags;
-
-		/*
-		 * clockevents_update_freq should be called with IRQ disabled on
-		 * the CPU the timer provides events for. The timer we use is
-		 * common to both CPUs, not sure if we need to run on both
-		 * cores.
-		 */
-		local_irq_save(flags);
-		clockevents_update_freq(&ttcce->ce,
-				ndata->new_rate / PRESCALE);
-		local_irq_restore(flags);
-
 		/* update cached frequency */
 		ttc->freq = ndata->new_rate;
 
+		clockevents_update_freq(&ttcce->ce, ndata->new_rate / PRESCALE);
+
 		/* fall through */
-	}
 	case PRE_RATE_CHANGE:
 	case ABORT_RATE_CHANGE:
 	default:
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
deleted file mode 100644
index 9e0998f22885..000000000000
--- a/drivers/clocksource/cyclone.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include <linux/clocksource.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/timex.h>
-#include <linux/init.h>
-
-#include <asm/pgtable.h>
-#include <asm/io.h>
-
-#include <asm/mach_timer.h>
-
-#define CYCLONE_CBAR_ADDR	0xFEB00CD0	/* base address ptr */
-#define CYCLONE_PMCC_OFFSET	0x51A0		/* offset to control register */
-#define CYCLONE_MPCS_OFFSET	0x51A8		/* offset to select register */
-#define CYCLONE_MPMC_OFFSET	0x51D0		/* offset to count register */
-#define CYCLONE_TIMER_FREQ	99780000	/* 100Mhz, but not really */
-#define CYCLONE_TIMER_MASK	CLOCKSOURCE_MASK(32) /* 32 bit mask */
-
-int use_cyclone = 0;
-static void __iomem *cyclone_ptr;
-
-static cycle_t read_cyclone(struct clocksource *cs)
-{
-	return (cycle_t)readl(cyclone_ptr);
-}
-
-static struct clocksource clocksource_cyclone = {
-	.name		= "cyclone",
-	.rating		= 250,
-	.read		= read_cyclone,
-	.mask		= CYCLONE_TIMER_MASK,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_cyclone_clocksource(void)
-{
-	unsigned long base;	/* saved value from CBAR */
-	unsigned long offset;
-	u32 __iomem* volatile cyclone_timer;	/* Cyclone MPMC0 register */
-	u32 __iomem* reg;
-	int i;
-
-	/* make sure we're on a summit box: */
-	if (!use_cyclone)
-		return -ENODEV;
-
-	printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
-
-	/* find base address: */
-	offset = CYCLONE_CBAR_ADDR;
-	reg = ioremap_nocache(offset, sizeof(reg));
-	if (!reg) {
-		printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
-		return -ENODEV;
-	}
-	/* even on 64bit systems, this is only 32bits: */
-	base = readl(reg);
-	iounmap(reg);
-	if (!base) {
-		printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
-		return -ENODEV;
-	}
-
-	/* setup PMCC: */
-	offset = base + CYCLONE_PMCC_OFFSET;
-	reg = ioremap_nocache(offset, sizeof(reg));
-	if (!reg) {
-		printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
-		return -ENODEV;
-	}
-	writel(0x00000001,reg);
-	iounmap(reg);
-
-	/* setup MPCS: */
-	offset = base + CYCLONE_MPCS_OFFSET;
-	reg = ioremap_nocache(offset, sizeof(reg));
-	if (!reg) {
-		printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
-		return -ENODEV;
-	}
-	writel(0x00000001,reg);
-	iounmap(reg);
-
-	/* map in cyclone_timer: */
-	offset = base + CYCLONE_MPMC_OFFSET;
-	cyclone_timer = ioremap_nocache(offset, sizeof(u64));
-	if (!cyclone_timer) {
-		printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
-		return -ENODEV;
-	}
-
-	/* quick test to make sure its ticking: */
-	for (i = 0; i < 3; i++){
-		u32 old = readl(cyclone_timer);
-		int stall = 100;
-
-		while (stall--)
-			barrier();
-
-		if (readl(cyclone_timer) == old) {
-			printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
-			iounmap(cyclone_timer);
-			cyclone_timer = NULL;
-			return -ENODEV;
-		}
-	}
-	cyclone_ptr = cyclone_timer;
-
-	return clocksource_register_hz(&clocksource_cyclone,
-					CYCLONE_TIMER_FREQ);
-}
-
-arch_initcall(init_cyclone_clocksource);
diff --git a/drivers/clocksource/dummy_timer.c b/drivers/clocksource/dummy_timer.c
index b3eb582d6a6f..ad3572541728 100644
--- a/drivers/clocksource/dummy_timer.c
+++ b/drivers/clocksource/dummy_timer.c
@@ -56,14 +56,19 @@ static struct notifier_block dummy_timer_cpu_nb = {
 
 static int __init dummy_timer_register(void)
 {
-	int err = register_cpu_notifier(&dummy_timer_cpu_nb);
+	int err = 0;
+
+	cpu_notifier_register_begin();
+	err = __register_cpu_notifier(&dummy_timer_cpu_nb);
 	if (err)
-		return err;
+		goto out;
 
 	/* We won't get a call on the boot CPU, so register immediately */
 	if (num_possible_cpus() > 1)
 		dummy_timer_setup();
 
-	return 0;
+out:
+	cpu_notifier_register_done();
+	return err;
 }
 early_initcall(dummy_timer_register);
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 48f76bc05da0..a6ee6d7cd63f 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -25,8 +25,6 @@
 #include <linux/of_address.h>
 #include <linux/clocksource.h>
 
-#include <asm/mach/time.h>
-
 #define EXYNOS4_MCTREG(x)		(x)
 #define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
 #define EXYNOS4_MCT_G_CNT_U		EXYNOS4_MCTREG(0x104)
@@ -410,7 +408,7 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt)
 	mevt = container_of(evt, struct mct_clock_event_device, evt);
 
 	mevt->base = EXYNOS4_MCT_L_BASE(cpu);
-	sprintf(mevt->name, "mct_tick%d", cpu);
+	snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu);
 
 	evt->name = mevt->name;
 	evt->cpumask = cpumask_of(cpu);
diff --git a/arch/arm/mach-msm/timer.c b/drivers/clocksource/qcom-timer.c
index fd1644987534..e807acf4c665 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/drivers/clocksource/qcom-timer.c
@@ -1,7 +1,7 @@
 /*
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2009-2012,2014, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -26,10 +26,6 @@
 #include <linux/of_irq.h>
 #include <linux/sched_clock.h>
 
-#include <asm/mach/time.h>
-
-#include "common.h"
-
 #define TIMER_MATCH_VAL			0x0000
 #define TIMER_COUNT_VAL			0x0004
 #define TIMER_ENABLE			0x0008
@@ -110,15 +106,6 @@ static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
 	return readl_relaxed(source_base + TIMER_COUNT_VAL);
 }
 
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
-	/*
-	 * Shift timer count down by a constant due to unreliable lower bits
-	 * on some targets.
-	 */
-	return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
 static struct clocksource msm_clocksource = {
 	.name	= "dg_timer",
 	.rating	= 300,
@@ -232,7 +219,7 @@ err:
 	sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
 }
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_ARCH_QCOM
 static void __init msm_dt_timer_init(struct device_node *np)
 {
 	u32 freq;
@@ -285,7 +272,7 @@ static void __init msm_dt_timer_init(struct device_node *np)
 }
 CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
 CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
-#endif
+#else
 
 static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
 				u32 sts)
@@ -305,6 +292,15 @@ static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
 	return 0;
 }
 
+static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
+{
+	/*
+	 * Shift timer count down by a constant due to unreliable lower bits
+	 * on some targets.
+	 */
+	return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
+}
+
 void __init msm7x01_timer_init(void)
 {
 	struct clocksource *cs = &msm_clocksource;
@@ -331,3 +327,4 @@ void __init qsd8x50_timer_init(void)
 		return;
 	msm_timer_init(19200000 / 4, 32, 7, false);
 }
+#endif
diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index bf497afba9ad..efb17c3ee120 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -196,5 +196,5 @@ static void __init sun4i_timer_init(struct device_node *node)
 	clockevents_config_and_register(&sun4i_clockevent, rate,
 					TIMER_SYNC_TICKS, 0xffffffff);
 }
-CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-timer",
+CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
 		       sun4i_timer_init);
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index ee8691b89944..0451e62fac7a 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -85,12 +85,6 @@ static u32 ticks_per_jiffy;
 
 static struct clock_event_device __percpu *armada_370_xp_evt;
 
-static void timer_ctrl_clrset(u32 clr, u32 set)
-{
-	writel((readl(timer_base + TIMER_CTRL_OFF) & ~clr) | set,
-		timer_base + TIMER_CTRL_OFF);
-}
-
 static void local_timer_ctrl_clrset(u32 clr, u32 set)
 {
 	writel((readl(local_base + TIMER_CTRL_OFF) & ~clr) | set,
@@ -245,7 +239,7 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
 		clr = TIMER0_25MHZ;
 		enable_mask = TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT);
 	}
-	timer_ctrl_clrset(clr, set);
+	atomic_io_modify(timer_base + TIMER_CTRL_OFF, clr | set, set);
 	local_timer_ctrl_clrset(clr, set);
 
 	/*
@@ -263,7 +257,9 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
 	writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
 	writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
 
-	timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
+	atomic_io_modify(timer_base + TIMER_CTRL_OFF,
+		TIMER0_RELOAD_EN | enable_mask,
+		TIMER0_RELOAD_EN | enable_mask);
 
 	/*
 	 * Set scale and timer for sched_clock.
diff --git a/drivers/clocksource/time-orion.c b/drivers/clocksource/time-orion.c
index 20066222f3f2..0b3ce0399c51 100644
--- a/drivers/clocksource/time-orion.c
+++ b/drivers/clocksource/time-orion.c
@@ -35,20 +35,6 @@
 #define ORION_ONESHOT_MAX	0xfffffffe
 
 static void __iomem *timer_base;
-static DEFINE_SPINLOCK(timer_ctrl_lock);
-
-/*
- * Thread-safe access to TIMER_CTRL register
- * (shared with watchdog timer)
- */
-void orion_timer_ctrl_clrset(u32 clr, u32 set)
-{
-	spin_lock(&timer_ctrl_lock);
-	writel((readl(timer_base + TIMER_CTRL) & ~clr) | set,
-		timer_base + TIMER_CTRL);
-	spin_unlock(&timer_ctrl_lock);
-}
-EXPORT_SYMBOL(orion_timer_ctrl_clrset);
 
 /*
  * Free-running clocksource handling.
@@ -68,7 +54,8 @@ static int orion_clkevt_next_event(unsigned long delta,
 {
 	/* setup and enable one-shot timer */
 	writel(delta, timer_base + TIMER1_VAL);
-	orion_timer_ctrl_clrset(TIMER1_RELOAD_EN, TIMER1_EN);
+	atomic_io_modify(timer_base + TIMER_CTRL,
+		TIMER1_RELOAD_EN | TIMER1_EN, TIMER1_EN);
 
 	return 0;
 }
@@ -80,10 +67,13 @@ static void orion_clkevt_mode(enum clock_event_mode mode,
 		/* setup and enable periodic timer at 1/HZ intervals */
 		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
 		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
-		orion_timer_ctrl_clrset(0, TIMER1_RELOAD_EN | TIMER1_EN);
+		atomic_io_modify(timer_base + TIMER_CTRL,
+			TIMER1_RELOAD_EN | TIMER1_EN,
+			TIMER1_RELOAD_EN | TIMER1_EN);
 	} else {
 		/* disable timer */
-		orion_timer_ctrl_clrset(TIMER1_RELOAD_EN | TIMER1_EN, 0);
+		atomic_io_modify(timer_base + TIMER_CTRL,
+			TIMER1_RELOAD_EN | TIMER1_EN, 0);
 	}
 }
 
@@ -131,7 +121,9 @@ static void __init orion_timer_init(struct device_node *np)
 	/* setup timer0 as free-running clocksource */
 	writel(~0, timer_base + TIMER0_VAL);
 	writel(~0, timer_base + TIMER0_RELOAD);
-	orion_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | TIMER0_EN);
+	atomic_io_modify(timer_base + TIMER_CTRL,
+		TIMER0_RELOAD_EN | TIMER0_EN,
+		TIMER0_RELOAD_EN | TIMER0_EN);
 	clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
 			      clk_get_rate(clk), 300, 32,
 			      clocksource_mmio_readl_down);
diff --git a/drivers/clocksource/timer-keystone.c b/drivers/clocksource/timer-keystone.c
new file mode 100644
index 000000000000..0250354f7e55
--- /dev/null
+++ b/drivers/clocksource/timer-keystone.c
@@ -0,0 +1,241 @@
+/*
+ * Keystone broadcast clock-event
+ *
+ * Copyright 2013 Texas Instruments, Inc.
+ *
+ * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define TIMER_NAME			"timer-keystone"
+
+/* Timer register offsets */
+#define TIM12				0x10
+#define TIM34				0x14
+#define PRD12				0x18
+#define PRD34				0x1c
+#define TCR				0x20
+#define TGCR				0x24
+#define INTCTLSTAT			0x44
+
+/* Timer register bitfields */
+#define TCR_ENAMODE_MASK		0xC0
+#define TCR_ENAMODE_ONESHOT_MASK	0x40
+#define TCR_ENAMODE_PERIODIC_MASK	0x80
+
+#define TGCR_TIM_UNRESET_MASK		0x03
+#define INTCTLSTAT_ENINT_MASK		0x01
+
+/**
+ * struct keystone_timer: holds timer's data
+ * @base: timer memory base address
+ * @hz_period: cycles per HZ period
+ * @event_dev: event device based on timer
+ */
+static struct keystone_timer {
+	void __iomem *base;
+	unsigned long hz_period;
+	struct clock_event_device event_dev;
+} timer;
+
+static inline u32 keystone_timer_readl(unsigned long rg)
+{
+	return readl_relaxed(timer.base + rg);
+}
+
+static inline void keystone_timer_writel(u32 val, unsigned long rg)
+{
+	writel_relaxed(val, timer.base + rg);
+}
+
+/**
+ * keystone_timer_barrier: write memory barrier
+ * use explicit barrier to avoid using readl/writel non relaxed function
+ * variants, because in our case non relaxed variants hide the true places
+ * where barrier is needed.
+ */
+static inline void keystone_timer_barrier(void)
+{
+	__iowmb();
+}
+
+/**
+ * keystone_timer_config: configures timer to work in oneshot/periodic modes.
+ * @ mode: mode to configure
+ * @ period: cycles number to configure for
+ */
+static int keystone_timer_config(u64 period, enum clock_event_mode mode)
+{
+	u32 tcr;
+	u32 off;
+
+	tcr = keystone_timer_readl(TCR);
+	off = tcr & ~(TCR_ENAMODE_MASK);
+
+	/* set enable mode */
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		tcr |= TCR_ENAMODE_ONESHOT_MASK;
+		break;
+	case CLOCK_EVT_MODE_PERIODIC:
+		tcr |= TCR_ENAMODE_PERIODIC_MASK;
+		break;
+	default:
+		return -1;
+	}
+
+	/* disable timer */
+	keystone_timer_writel(off, TCR);
+	/* here we have to be sure the timer has been disabled */
+	keystone_timer_barrier();
+
+	/* reset counter to zero, set new period */
+	keystone_timer_writel(0, TIM12);
+	keystone_timer_writel(0, TIM34);
+	keystone_timer_writel(period & 0xffffffff, PRD12);
+	keystone_timer_writel(period >> 32, PRD34);
+
+	/*
+	 * enable timer
+	 * here we have to be sure that CNTLO, CNTHI, PRDLO, PRDHI registers
+	 * have been written.
+	 */
+	keystone_timer_barrier();
+	keystone_timer_writel(tcr, TCR);
+	return 0;
+}
+
+static void keystone_timer_disable(void)
+{
+	u32 tcr;
+
+	tcr = keystone_timer_readl(TCR);
+
+	/* disable timer */
+	tcr &= ~(TCR_ENAMODE_MASK);
+	keystone_timer_writel(tcr, TCR);
+}
+
+static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static int keystone_set_next_event(unsigned long cycles,
+				  struct clock_event_device *evt)
+{
+	return keystone_timer_config(cycles, evt->mode);
+}
+
+static void keystone_set_mode(enum clock_event_mode mode,
+			     struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		keystone_timer_config(timer.hz_period, CLOCK_EVT_MODE_PERIODIC);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_ONESHOT:
+		keystone_timer_disable();
+		break;
+	default:
+		break;
+	}
+}
+
+static void __init keystone_timer_init(struct device_node *np)
+{
+	struct clock_event_device *event_dev = &timer.event_dev;
+	unsigned long rate;
+	struct clk *clk;
+	int irq, error;
+
+	irq  = irq_of_parse_and_map(np, 0);
+	if (irq == NO_IRQ) {
+		pr_err("%s: failed to map interrupts\n", __func__);
+		return;
+	}
+
+	timer.base = of_iomap(np, 0);
+	if (!timer.base) {
+		pr_err("%s: failed to map registers\n", __func__);
+		return;
+	}
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("%s: failed to get clock\n", __func__);
+		iounmap(timer.base);
+		return;
+	}
+
+	error = clk_prepare_enable(clk);
+	if (error) {
+		pr_err("%s: failed to enable clock\n", __func__);
+		goto err;
+	}
+
+	rate = clk_get_rate(clk);
+
+	/* disable, use internal clock source */
+	keystone_timer_writel(0, TCR);
+	/* here we have to be sure the timer has been disabled */
+	keystone_timer_barrier();
+
+	/* reset timer as 64-bit, no pre-scaler, plus features are disabled */
+	keystone_timer_writel(0, TGCR);
+
+	/* unreset timer */
+	keystone_timer_writel(TGCR_TIM_UNRESET_MASK, TGCR);
+
+	/* init counter to zero */
+	keystone_timer_writel(0, TIM12);
+	keystone_timer_writel(0, TIM34);
+
+	timer.hz_period = DIV_ROUND_UP(rate, HZ);
+
+	/* enable timer interrupts */
+	keystone_timer_writel(INTCTLSTAT_ENINT_MASK, INTCTLSTAT);
+
+	error = request_irq(irq, keystone_timer_interrupt, IRQF_TIMER,
+			    TIMER_NAME, event_dev);
+	if (error) {
+		pr_err("%s: failed to setup irq\n", __func__);
+		goto err;
+	}
+
+	/* setup clockevent */
+	event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	event_dev->set_next_event = keystone_set_next_event;
+	event_dev->set_mode = keystone_set_mode;
+	event_dev->cpumask = cpu_all_mask;
+	event_dev->owner = THIS_MODULE;
+	event_dev->name = TIMER_NAME;
+	event_dev->irq = irq;
+
+	clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX);
+
+	pr_info("keystone timer clock @%lu Hz\n", rate);
+	return;
+err:
+	clk_put(clk);
+	iounmap(timer.base);
+}
+
+CLOCKSOURCE_OF_DECLARE(keystone_timer, "ti,keystone-timer",
+					keystone_timer_init);
diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
index 09a17d9a6594..b52e1c078b99 100644
--- a/drivers/clocksource/timer-marco.c
+++ b/drivers/clocksource/timer-marco.c
@@ -19,7 +19,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/sched_clock.h>
-#include <asm/mach/time.h>
+
+#define MARCO_CLOCK_FREQ 1000000
 
 #define SIRFSOC_TIMER_32COUNTER_0_CTRL			0x0000
 #define SIRFSOC_TIMER_32COUNTER_1_CTRL			0x0004
@@ -191,7 +192,7 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce)
 	ce->rating = 200;
 	ce->set_mode = sirfsoc_timer_set_mode;
 	ce->set_next_event = sirfsoc_timer_set_next_event;
-	clockevents_calc_mult_shift(ce, CLOCK_TICK_RATE, 60);
+	clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60);
 	ce->max_delta_ns = clockevent_delta2ns(-2, ce);
 	ce->min_delta_ns = clockevent_delta2ns(2, ce);
 	ce->cpumask = cpumask_of(cpu);
@@ -263,11 +264,11 @@ static void __init sirfsoc_marco_timer_init(void)
 	BUG_ON(IS_ERR(clk));
 	rate = clk_get_rate(clk);
 
-	BUG_ON(rate < CLOCK_TICK_RATE);
-	BUG_ON(rate % CLOCK_TICK_RATE);
+	BUG_ON(rate < MARCO_CLOCK_FREQ);
+	BUG_ON(rate % MARCO_CLOCK_FREQ);
 
 	/* Initialize the timer dividers */
-	timer_div = rate / CLOCK_TICK_RATE - 1;
+	timer_div = rate / MARCO_CLOCK_FREQ - 1;
 	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
 	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
 	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
@@ -283,7 +284,7 @@ static void __init sirfsoc_marco_timer_init(void)
 	/* Clear all interrupts */
 	writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
 
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ));
 
 	sirfsoc_clockevent_init();
 }
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index 8a492d34ff9f..1a6b2d6356d6 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -21,6 +21,8 @@
 #include <linux/sched_clock.h>
 #include <asm/mach/time.h>
 
+#define PRIMA2_CLOCK_FREQ 1000000
+
 #define SIRFSOC_TIMER_COUNTER_LO	0x0000
 #define SIRFSOC_TIMER_COUNTER_HI	0x0004
 #define SIRFSOC_TIMER_MATCH_0		0x0008
@@ -173,7 +175,7 @@ static u64 notrace sirfsoc_read_sched_clock(void)
 static void __init sirfsoc_clockevent_init(void)
 {
 	sirfsoc_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE,
+	clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ,
 					2, -2);
 }
 
@@ -190,8 +192,8 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	rate = clk_get_rate(clk);
 
-	BUG_ON(rate < CLOCK_TICK_RATE);
-	BUG_ON(rate % CLOCK_TICK_RATE);
+	BUG_ON(rate < PRIMA2_CLOCK_FREQ);
+	BUG_ON(rate % PRIMA2_CLOCK_FREQ);
 
 	sirfsoc_timer_base = of_iomap(np, 0);
 	if (!sirfsoc_timer_base)
@@ -199,14 +201,16 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
 
-	writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
+	writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1,
+		       sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
 	writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
 
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource,
+				       PRIMA2_CLOCK_FREQ));
 
-	sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
+	sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
 
 	BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
 
diff --git a/arch/arm/mach-u300/timer.c b/drivers/clocksource/timer-u300.c
index fe08fd34c0ce..5dcf756970e7 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/drivers/clocksource/timer-u300.c
@@ -1,8 +1,4 @@
 /*
- *
- * arch/arm/mach-u300/timer.c
- *
- *
  * Copyright (C) 2007-2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * Timer COH 901 328, runs the OS timer interrupt.
@@ -337,7 +333,7 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction u300_timer_irq = {
 	.name		= "U300 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= u300_timer_interrupt,
 };
 
diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c
index 02821b06a39e..a918bc481c52 100644
--- a/drivers/clocksource/vf_pit_timer.c
+++ b/drivers/clocksource/vf_pit_timer.c
@@ -54,7 +54,7 @@ static inline void pit_irq_acknowledge(void)
 
 static u64 pit_read_sched_clock(void)
 {
-	return __raw_readl(clksrc_base + PITCVAL);
+	return ~__raw_readl(clksrc_base + PITCVAL);
 }
 
 static int __init pit_clocksource_init(unsigned long rate)