Merge tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY/Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB, PHY, and Thunderbolt driver updates for
  5.10-rc1.

  Lots of tiny different things for these subsystems are in here,
  including:

   - phy driver updates

   - thunderbolt / USB 4 updates and additions

   - USB gadget driver updates

   - xhci fixes and updates

   - typec driver additions and updates

   - api conversions to various drivers for core kernel api changes

   - new USB control message functions to make it harder to get wrong,
     as found by syzbot (took 2 tries to get it right)

   - lots of tiny USB driver fixes and updates all over the place

  All of these have been in linux-next for a while, with the exception
  of the last "obviously correct" patch that updated a FALLTHROUGH
  comment that got merged last weekend"

* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
  usb: musb: gadget: Use fallthrough pseudo-keyword
  usb: typec: Add QCOM PMIC typec detection driver
  USB: serial: option: add Cellient MPL200 card
  usb: typec: tcpci_maxim: Add support for Sink FRS
  usb: typec: tcpci: Implement callbacks for FRS
  usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
  usb: typec: tcpci_maxim: Chip level TCPC driver
  usb: typec: tcpci: Add set_vbus tcpci callback
  usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
  usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
  usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
  USB: serial: ftdi_sio: use cur_altsetting for consistency
  USB: serial: option: Add Telit FT980-KS composition
  USB: core: remove polling for /sys/kernel/debug/usb/devices
  usb: typec: add support for STUSB160x Type-C controller family
  usb: typec: add typec_find_pwr_opmode
  usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
  dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
  dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
  usb: dwc2: Fix INTR OUT transfers in DDMA mode.
  ...

2 files changed, 1 insertions, 63 deletions

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index fbd785dd0513..4843e94713a4 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -178,9 +178,8 @@ config ISCSI_IBFT
 	  Otherwise, say N.
 
 config RASPBERRYPI_FIRMWARE
-	bool "Raspberry Pi Firmware Driver"
+	tristate "Raspberry Pi Firmware Driver"
 	depends on BCM2835_MBOX
-	default USB_PCI
 	help
 	  This option enables support for communicating with the firmware on the
 	  Raspberry Pi.
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
index 8f2fb4c562da..2371d08bdd17 100644
--- a/drivers/firmware/raspberrypi.c
+++ b/drivers/firmware/raspberrypi.c
@@ -12,8 +12,6 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
 #include <soc/bcm2835/raspberrypi-firmware.h>
 
 #define MBOX_MSG(chan, data28)		(((data28) & ~0xf) | ((chan) & 0xf))
@@ -21,8 +19,6 @@
 #define MBOX_DATA28(msg)		((msg) & ~0xf)
 #define MBOX_CHAN_PROPERTY		8
 
-#define VL805_PCI_CONFIG_VERSION_OFFSET		0x50
-
 static struct platform_device *rpi_hwmon;
 static struct platform_device *rpi_clk;
 
@@ -301,63 +297,6 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
 }
 EXPORT_SYMBOL_GPL(rpi_firmware_get);
 
-/*
- * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that
- * implements xHCI. After a PCI reset, VL805's firmware may either be loaded
- * directly from an EEPROM or, if not present, by the SoC's co-processor,
- * VideoCore. RPi4's VideoCore OS contains both the non public firmware load
- * logic and the VL805 firmware blob. This function triggers the aforementioned
- * process.
- */
-int rpi_firmware_init_vl805(struct pci_dev *pdev)
-{
-	struct device_node *fw_np;
-	struct rpi_firmware *fw;
-	u32 dev_addr, version;
-	int ret;
-
-	fw_np = of_find_compatible_node(NULL, NULL,
-					"raspberrypi,bcm2835-firmware");
-	if (!fw_np)
-		return 0;
-
-	fw = rpi_firmware_get(fw_np);
-	of_node_put(fw_np);
-	if (!fw)
-		return -ENODEV;
-
-	/*
-	 * Make sure we don't trigger a firmware load unnecessarily.
-	 *
-	 * If something went wrong with PCI, this whole exercise would be
-	 * futile as VideoCore expects from us a configured PCI bus. Just take
-	 * the faulty version (likely ~0) and let xHCI's registration fail
-	 * further down the line.
-	 */
-	pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version);
-	if (version)
-		goto exit;
-
-	dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 |
-		   PCI_FUNC(pdev->devfn) << 12;
-
-	ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
-				    &dev_addr, sizeof(dev_addr));
-	if (ret)
-		return ret;
-
-	/* Wait for vl805 to startup */
-	usleep_range(200, 1000);
-
-	pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET,
-			      &version);
-exit:
-	pci_info(pdev, "VL805 firmware version %08x\n", version);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805);
-
 static const struct of_device_id rpi_firmware_of_match[] = {
 	{ .compatible = "raspberrypi,bcm2835-firmware", },
 	{},