Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main pull request for 5.4-rc1 merge window. I don't think
  there is anything outstanding so next week should just be fixes, but
  we'll see if I missed anything. I landed some fixes earlier in the
  week but got delayed writing summary and sending it out, due to a mix
  of sick kid and jetlag!

  There are some fixes pending, but I'd rather get the main merge out of
  the way instead of delaying it longer.

  It's also pretty large in commit count and new amd header file size.
  The largest thing is four new amdgpu products (navi12/14, arcturus and
  renoir APU support).

  Otherwise it's pretty much lots of work across the board, i915 has
  started landing tigerlake support, lots of icelake fixes and lots of
  locking reworking for future gpu support, lots of header file rework
  (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been
  put into the places they are needed.

  uapi:
   - content protection type property for HDCP

  core:
   - rework include dependencies
   - lots of drmP.h removals
   - link rate calculation robustness fix
   - make fb helper map only when required
   - add connector->DDC adapter link
   - DRM_WAIT_ON removed
   - drop DRM_AUTH usage from drivers

  dma-buf:
   - reservation object fence helper

  dma-fence:
   - shrink dma_fence struct
   - merge signal functions
   - store timestamps in dma_fence
   - selftests

  ttm:
   - embed drm_get_object struct into ttm_buffer_object
   - release_notify callback

  bridges:
   - sii902x - audio graph card support
   - tc358767 - aux data handling rework
   - ti-snd64dsi86 - debugfs support, DSI mode flags support

  panels:
   - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
     COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe
     Himax8279d, Sharp LD-D5116Z01B
   - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01,
     Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1

  i915:
   - Initial tigerlake platform support
   - Locking simplification work, general all over refactoring.
   - Selftests
   - HDCP debug info improvements
   - DSI properties
   - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI
     suspend/resume
   - GuC fixes
   - Perf fixes
   - ElkhartLake enablement
   - DP MST fixes
   - GVT - command parser enhancements

  amdgpu:
   - add wipe memory on release flag for buffer creation
   - Navi12/14 support (may be marked experimental)
   - Arcturus support
   - Renoir APU support
   - mclk DPM for Navi
   - DC display fixes
   - Raven scatter/gather support
   - RAS support for GFX
   - Navi12 + Arcturus power features
   - GPU reset for Picasso
   - smu11 i2c controller support

  amdkfd:
   - navi12/14 support
   - Arcturus support

  radeon:
   - kexec fix

  nouveau:
   - improved display color management
   - detect lack of GPU power cables

  vmwgfx:
   - evicition priority support
   - remove unused security feature

  msm:
   - msm8998 display support
   - better async commit support for cursor updates

  etnaviv:
   - per-process address space support
   - performance counter fixes
   - softpin support

  mcde:
   - DCS transfers fix

  exynos:
   - drmP.h cleanup

  lima:
   - reduce logging

  kirin:
   - misc clenaups

  komeda:
   - dual-link support
   - DT memory regions

  hisilicon:
   - misc fixes

  imx:
   - IPUv3 image converter fixes
   - 32-bit RGB V4L2 pixel format support

  ingenic:
   - more support for panel related cases

  mgag200:
   - cursor support fix

  panfrost:
   - export GPU features register to userspace
   - gpu heap allocations
   - per-fd address space support

  pl111:
   - CLD pads wiring support removed from DT

  rockchip:
   - rework to use DRM PSR helpers
   - fix bug in VOP_WIN_GET macro
   - DSI DT binding rework

  sun4i:
   - improve support for color encoding and range
   - DDC enabled GPIO

  tinydrm:
   - rework SPI support
   - improve MIPI-DBI support
   - moved to drm/tiny

  vkms:
   - rework CRC tracking

  dw-hdmi:
   - get_eld and i2s improvements

  gm12u320:
   - misc fixes

  meson:
   - global code cleanup
   - vpu feature detect

  omap:
   - alpha/pixel blend mode properties

  rcar-du:
   - misc fixes"

* tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits)
  drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init
  drm/nouveau: Fix ordering between TTM and GEM release
  drm/nouveau/prime: Extend DMA reservation object lock
  drm/nouveau: Fix fallout from reservation object rework
  drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors
  drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
  drm/i915: to make vgpu ppgtt notificaiton as atomic operation
  drm/i915: Flush the existing fence before GGTT read/write
  drm/i915: Hold irq-off for the entire fake lock period
  drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
  drm/i915/gvt: update vgpu workload head pointer correctly
  drm/mcde: Fix DSI transfers
  drm/msm: Use the correct dma_sync calls harder
  drm/msm: remove unlikely() from WARN_ON() conditions
  drm/msm/dsi: Fix return value check for clk_get_parent
  drm/msm: add atomic traces
  drm/msm/dpu: async commit support
  drm/msm: async commit support
  drm/msm: split power control from prepare/complete_commit
  drm/msm: add kms->flush_commit()
  ...

1 files changed, 138 insertions, 43 deletions

diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 7b7a0d8d737c..4efd7864d5bf 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -5,14 +5,14 @@
  * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <drm/drmP.h>
+#include <linux/export.h>
+
+#include <drm/drm_modes.h>
+
 #include "meson_drv.h"
+#include "meson_registers.h"
 #include "meson_venc.h"
 #include "meson_vpp.h"
-#include "meson_vclk.h"
-#include "meson_registers.h"
 
 /**
  * DOC: Video Encoder
@@ -61,9 +61,9 @@
 /* HHI Registers */
 #define HHI_GCLK_MPEG2		0x148 /* 0x52 offset in data sheet */
 #define HHI_VDAC_CNTL0		0x2F4 /* 0xbd offset in data sheet */
-#define HHI_VDAC_CNTL0_G12A	0x2EC /* 0xbd offset in data sheet */
+#define HHI_VDAC_CNTL0_G12A	0x2EC /* 0xbb offset in data sheet */
 #define HHI_VDAC_CNTL1		0x2F8 /* 0xbe offset in data sheet */
-#define HHI_VDAC_CNTL1_G12A	0x2F0 /* 0xbe offset in data sheet */
+#define HHI_VDAC_CNTL1_G12A	0x2F0 /* 0xbc offset in data sheet */
 #define HHI_HDMI_PHY_CNTL0	0x3a0 /* 0xe8 offset in data sheet */
 
 struct meson_cvbs_enci_mode meson_cvbs_enci_pal = {
@@ -192,7 +192,7 @@ union meson_hdmi_venc_mode meson_hdmi_enci_mode_480i = {
 		.hso_end = 129,
 		.vso_even = 3,
 		.vso_odd = 260,
-		.macv_max_amp = 0x810b,
+		.macv_max_amp = 0xb,
 		.video_prog_mode = 0xf0,
 		.video_mode = 0x8,
 		.sch_adjust = 0x20,
@@ -212,7 +212,7 @@ union meson_hdmi_venc_mode meson_hdmi_enci_mode_576i = {
 		.hso_end = 129,
 		.vso_even = 3,
 		.vso_odd = 260,
-		.macv_max_amp = 8107,
+		.macv_max_amp = 0x7,
 		.video_prog_mode = 0xff,
 		.video_mode = 0x13,
 		.sch_adjust = 0x28,
@@ -976,6 +976,7 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 	unsigned int eof_lines;
 	unsigned int sof_lines;
 	unsigned int vsync_lines;
+	u32 reg;
 
 	/* Use VENCI for 480i and 576i and double HDMI pixels */
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK) {
@@ -1048,8 +1049,11 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		unsigned int lines_f1;
 
 		/* CVBS Filter settings */
-		writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL));
-		writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL2));
+		writel_relaxed(ENCI_CFILT_CMPT_SEL_HIGH | 0x10,
+			       priv->io_base + _REG(ENCI_CFILT_CTRL));
+		writel_relaxed(ENCI_CFILT_CMPT_CR_DLY(2) |
+			       ENCI_CFILT_CMPT_CB_DLY(1),
+			       priv->io_base + _REG(ENCI_CFILT_CTRL2));
 
 		/* Digital Video Select : Interlace, clk27 clk, external */
 		writel_relaxed(0, priv->io_base + _REG(VENC_DVI_SETTING));
@@ -1071,8 +1075,9 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 				priv->io_base + _REG(ENCI_SYNC_VSO_ODDLN));
 
 		/* Macrovision max amplitude change */
-		writel_relaxed(vmode->enci.macv_max_amp,
-				priv->io_base + _REG(ENCI_MACV_MAX_AMP));
+		writel_relaxed(ENCI_MACV_MAX_AMP_ENABLE_CHANGE |
+			       ENCI_MACV_MAX_AMP_VAL(vmode->enci.macv_max_amp),
+			       priv->io_base + _REG(ENCI_MACV_MAX_AMP));
 
 		/* Video mode */
 		writel_relaxed(vmode->enci.video_prog_mode,
@@ -1080,7 +1085,8 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		writel_relaxed(vmode->enci.video_mode,
 				priv->io_base + _REG(ENCI_VIDEO_MODE));
 
-		/* Advanced Video Mode :
+		/*
+		 * Advanced Video Mode :
 		 * Demux shifting 0x2
 		 * Blank line end at line17/22
 		 * High bandwidth Luma Filter
@@ -1088,7 +1094,10 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		 * Bypass luma low pass filter
 		 * No macrovision on CSYNC
 		 */
-		writel_relaxed(0x26, priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
+		writel_relaxed(ENCI_VIDEO_MODE_ADV_DMXMD(2) |
+			       ENCI_VIDEO_MODE_ADV_VBICTL_LINE_17_22 |
+			       ENCI_VIDEO_MODE_ADV_YBW_HIGH,
+			       priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
 
 		writel(vmode->enci.sch_adjust,
 				priv->io_base + _REG(ENCI_VIDEO_SCH));
@@ -1104,8 +1113,17 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		/* UNreset Interlaced TV Encoder */
 		writel_relaxed(0, priv->io_base + _REG(ENCI_DBG_PX_RST));
 
-		/* Enable Vfifo2vd, Y_Cb_Y_Cr select */
-		writel_relaxed(0x4e01, priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
+		/*
+		 * Enable Vfifo2vd and set Y_Cb_Y_Cr:
+		 * Corresponding value:
+		 * Y  => 00 or 10
+		 * Cb => 01
+		 * Cr => 11
+		 * Ex: 0x4e => 01001110 would mean Cb/Y/Cr/Y
+		 */
+		writel_relaxed(ENCI_VFIFO2VD_CTL_ENABLE |
+			       ENCI_VFIFO2VD_CTL_VD_SEL(0x4e),
+			       priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
 
 		/* Timings */
 		writel_relaxed(vmode->enci.pixel_start,
@@ -1127,7 +1145,8 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		meson_vpp_setup_mux(priv, MESON_VIU_VPP_MUX_ENCI);
 
 		/* Interlace video enable */
-		writel_relaxed(1, priv->io_base + _REG(ENCI_VIDEO_EN));
+		writel_relaxed(ENCI_VIDEO_EN_ENABLE,
+			       priv->io_base + _REG(ENCI_VIDEO_EN));
 
 		lines_f0 = mode->vtotal >> 1;
 		lines_f1 = lines_f0 + 1;
@@ -1374,7 +1393,8 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		writel_relaxed(1, priv->io_base + _REG(ENCP_VIDEO_EN));
 
 		/* Set DE signal’s polarity is active high */
-		writel_bits_relaxed(BIT(14), BIT(14),
+		writel_bits_relaxed(ENCP_VIDEO_MODE_DE_V_HIGH,
+				    ENCP_VIDEO_MODE_DE_V_HIGH,
 				    priv->io_base + _REG(ENCP_VIDEO_MODE));
 
 		/* Program DE timing */
@@ -1493,13 +1513,39 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 		meson_vpp_setup_mux(priv, MESON_VIU_VPP_MUX_ENCP);
 	}
 
-	writel_relaxed((use_enci ? 1 : 2) |
-		       (mode->flags & DRM_MODE_FLAG_PHSYNC ? 1 << 2 : 0) |
-		       (mode->flags & DRM_MODE_FLAG_PVSYNC ? 1 << 3 : 0) |
-		       4 << 5 |
-		       (venc_repeat ? 1 << 8 : 0) |
-		       (hdmi_repeat ? 1 << 12 : 0),
-		       priv->io_base + _REG(VPU_HDMI_SETTING));
+	/* Set VPU HDMI setting */
+	/* Select ENCP or ENCI data to HDMI */
+	if (use_enci)
+		reg = VPU_HDMI_ENCI_DATA_TO_HDMI;
+	else
+		reg = VPU_HDMI_ENCP_DATA_TO_HDMI;
+
+	/* Invert polarity of HSYNC from VENC */
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		reg |= VPU_HDMI_INV_HSYNC;
+
+	/* Invert polarity of VSYNC from VENC */
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		reg |= VPU_HDMI_INV_VSYNC;
+
+	/* Output data format: CbYCr */
+	reg |= VPU_HDMI_OUTPUT_CBYCR;
+
+	/*
+	 * Write rate to the async FIFO between VENC and HDMI.
+	 * One write every 2 wr_clk.
+	 */
+	if (venc_repeat)
+		reg |= VPU_HDMI_WR_RATE(2);
+
+	/*
+	 * Read rate to the async FIFO between VENC and HDMI.
+	 * One read every 2 wr_clk.
+	 */
+	if (hdmi_repeat)
+		reg |= VPU_HDMI_RD_RATE(2);
+
+	writel_relaxed(reg, priv->io_base + _REG(VPU_HDMI_SETTING));
 
 	priv->venc.hdmi_repeat = hdmi_repeat;
 	priv->venc.venc_repeat = venc_repeat;
@@ -1512,12 +1558,17 @@ EXPORT_SYMBOL_GPL(meson_venc_hdmi_mode_set);
 void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 			       struct meson_cvbs_enci_mode *mode)
 {
+	u32 reg;
+
 	if (mode->mode_tag == priv->venc.current_mode)
 		return;
 
 	/* CVBS Filter settings */
-	writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL));
-	writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL2));
+	writel_relaxed(ENCI_CFILT_CMPT_SEL_HIGH | 0x10,
+		       priv->io_base + _REG(ENCI_CFILT_CTRL));
+	writel_relaxed(ENCI_CFILT_CMPT_CR_DLY(2) |
+		       ENCI_CFILT_CMPT_CB_DLY(1),
+		       priv->io_base + _REG(ENCI_CFILT_CTRL2));
 
 	/* Digital Video Select : Interlace, clk27 clk, external */
 	writel_relaxed(0, priv->io_base + _REG(VENC_DVI_SETTING));
@@ -1539,8 +1590,9 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 			priv->io_base + _REG(ENCI_SYNC_VSO_ODDLN));
 
 	/* Macrovision max amplitude change */
-	writel_relaxed(0x8100 + mode->macv_max_amp,
-			priv->io_base + _REG(ENCI_MACV_MAX_AMP));
+	writel_relaxed(ENCI_MACV_MAX_AMP_ENABLE_CHANGE |
+		       ENCI_MACV_MAX_AMP_VAL(mode->macv_max_amp),
+		       priv->io_base + _REG(ENCI_MACV_MAX_AMP));
 
 	/* Video mode */
 	writel_relaxed(mode->video_prog_mode,
@@ -1548,7 +1600,8 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 	writel_relaxed(mode->video_mode,
 			priv->io_base + _REG(ENCI_VIDEO_MODE));
 
-	/* Advanced Video Mode :
+	/*
+	 * Advanced Video Mode :
 	 * Demux shifting 0x2
 	 * Blank line end at line17/22
 	 * High bandwidth Luma Filter
@@ -1556,7 +1609,10 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 	 * Bypass luma low pass filter
 	 * No macrovision on CSYNC
 	 */
-	writel_relaxed(0x26, priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
+	writel_relaxed(ENCI_VIDEO_MODE_ADV_DMXMD(2) |
+		       ENCI_VIDEO_MODE_ADV_VBICTL_LINE_17_22 |
+		       ENCI_VIDEO_MODE_ADV_YBW_HIGH,
+		       priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
 
 	writel(mode->sch_adjust, priv->io_base + _REG(ENCI_VIDEO_SCH));
 
@@ -1588,16 +1644,50 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 	/* UNreset Interlaced TV Encoder */
 	writel_relaxed(0, priv->io_base + _REG(ENCI_DBG_PX_RST));
 
-	/* Enable Vfifo2vd, Y_Cb_Y_Cr select */
-	writel_relaxed(0x4e01, priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
+	/*
+	 * Enable Vfifo2vd and set Y_Cb_Y_Cr:
+	 * Corresponding value:
+	 * Y  => 00 or 10
+	 * Cb => 01
+	 * Cr => 11
+	 * Ex: 0x4e => 01001110 would mean Cb/Y/Cr/Y
+	 */
+	writel_relaxed(ENCI_VFIFO2VD_CTL_ENABLE |
+		       ENCI_VFIFO2VD_CTL_VD_SEL(0x4e),
+		       priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
 
 	/* Power UP Dacs */
 	writel_relaxed(0, priv->io_base + _REG(VENC_VDAC_SETTING));
 
 	/* Video Upsampling */
-	writel_relaxed(0x0061, priv->io_base + _REG(VENC_UPSAMPLE_CTRL0));
-	writel_relaxed(0x4061, priv->io_base + _REG(VENC_UPSAMPLE_CTRL1));
-	writel_relaxed(0x5061, priv->io_base + _REG(VENC_UPSAMPLE_CTRL2));
+	/*
+	 * CTRL0, CTRL1 and CTRL2:
+	 * Filter0: input data sample every 2 cloks
+	 * Filter1: filtering and upsample enable
+	 */
+	reg = VENC_UPSAMPLE_CTRL_F0_2_CLK_RATIO | VENC_UPSAMPLE_CTRL_F1_EN |
+		VENC_UPSAMPLE_CTRL_F1_UPSAMPLE_EN;
+
+	/*
+	 * Upsample CTRL0:
+	 * Interlace High Bandwidth Luma
+	 */
+	writel_relaxed(VENC_UPSAMPLE_CTRL_INTERLACE_HIGH_LUMA | reg,
+		       priv->io_base + _REG(VENC_UPSAMPLE_CTRL0));
+
+	/*
+	 * Upsample CTRL1:
+	 * Interlace Pb
+	 */
+	writel_relaxed(VENC_UPSAMPLE_CTRL_INTERLACE_PB | reg,
+		       priv->io_base + _REG(VENC_UPSAMPLE_CTRL1));
+
+	/*
+	 * Upsample CTRL2:
+	 * Interlace R
+	 */
+	writel_relaxed(VENC_UPSAMPLE_CTRL_INTERLACE_PR | reg,
+		       priv->io_base + _REG(VENC_UPSAMPLE_CTRL2));
 
 	/* Select Interlace Y DACs */
 	writel_relaxed(0, priv->io_base + _REG(VENC_VDAC_DACSEL0));
@@ -1611,14 +1701,16 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 	meson_vpp_setup_mux(priv, MESON_VIU_VPP_MUX_ENCI);
 
 	/* Enable ENCI FIFO */
-	writel_relaxed(0x2000, priv->io_base + _REG(VENC_VDAC_FIFO_CTRL));
+	writel_relaxed(VENC_VDAC_FIFO_EN_ENCI_ENABLE,
+		       priv->io_base + _REG(VENC_VDAC_FIFO_CTRL));
 
 	/* Select ENCI DACs 0, 1, 4, and 5 */
 	writel_relaxed(0x11, priv->io_base + _REG(ENCI_DACSEL_0));
 	writel_relaxed(0x11, priv->io_base + _REG(ENCI_DACSEL_1));
 
 	/* Interlace video enable */
-	writel_relaxed(1, priv->io_base + _REG(ENCI_VIDEO_EN));
+	writel_relaxed(ENCI_VIDEO_EN_ENABLE,
+		       priv->io_base + _REG(ENCI_VIDEO_EN));
 
 	/* Configure Video Saturation / Contrast / Brightness / Hue */
 	writel_relaxed(mode->video_saturation,
@@ -1631,7 +1723,8 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 			priv->io_base + _REG(ENCI_VIDEO_HUE));
 
 	/* Enable DAC0 Filter */
-	writel_relaxed(0x1, priv->io_base + _REG(VENC_VDAC_DAC0_FILT_CTRL0));
+	writel_relaxed(VENC_VDAC_DAC0_FILT_CTRL0_EN,
+		       priv->io_base + _REG(VENC_VDAC_DAC0_FILT_CTRL0));
 	writel_relaxed(0xfc48, priv->io_base + _REG(VENC_VDAC_DAC0_FILT_CTRL1));
 
 	/* 0 in Macrovision register 0 */
@@ -1652,7 +1745,8 @@ unsigned int meson_venci_get_field(struct meson_drm *priv)
 
 void meson_venc_enable_vsync(struct meson_drm *priv)
 {
-	writel_relaxed(2, priv->io_base + _REG(VENC_INTCTRL));
+	writel_relaxed(VENC_INTCTRL_ENCI_LNRST_INT_EN,
+		       priv->io_base + _REG(VENC_INTCTRL));
 	regmap_update_bits(priv->hhi, HHI_GCLK_MPEG2, BIT(25), BIT(25));
 }
 
@@ -1665,7 +1759,7 @@ void meson_venc_disable_vsync(struct meson_drm *priv)
 void meson_venc_init(struct meson_drm *priv)
 {
 	/* Disable CVBS VDAC */
-	if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
 		regmap_write(priv->hhi, HHI_VDAC_CNTL0_G12A, 0);
 		regmap_write(priv->hhi, HHI_VDAC_CNTL1_G12A, 8);
 	} else {
@@ -1680,7 +1774,8 @@ void meson_venc_init(struct meson_drm *priv)
 	regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0);
 
 	/* Disable HDMI */
-	writel_bits_relaxed(0x3, 0,
+	writel_bits_relaxed(VPU_HDMI_ENCI_DATA_TO_HDMI |
+			    VPU_HDMI_ENCP_DATA_TO_HDMI, 0,
 			    priv->io_base + _REG(VPU_HDMI_SETTING));
 
 	/* Disable all encoders */