drm/msm/dsi: support CPHY mode for 7nm pll/phy

Add the required changes to support 7nm pll/phy in CPHY mode.

This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable
the CPHY mode.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210617144349.28448-4-jonathan@marek.ca
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

1 files changed, 49 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 6ca6bfd4809b..3e64f1840672 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -5,6 +5,7 @@
 
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
 
 #include "dsi_phy.h"
 
@@ -461,6 +462,51 @@ int msm_dsi_dphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing,
 	return 0;
 }
 
+int msm_dsi_cphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing,
+	struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, ui_x7;
+	s32 tmax, tmin;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	ui_x7 = ui * 7;
+
+	temp = S_DIV_ROUND_UP(38 * coeff, ui_x7);
+	tmin = max_t(s32, temp, 0);
+	temp = (95 * coeff) / ui_x7;
+	tmax = max_t(s32, temp, 0);
+	timing->clk_prepare = linear_inter(tmax, tmin, 50, 0, false);
+
+	tmin = DIV_ROUND_UP(50 * coeff, ui_x7);
+	tmax = 255;
+	timing->hs_rqst = linear_inter(tmax, tmin, 1, 0, false);
+
+	tmin = DIV_ROUND_UP(100 * coeff, ui_x7) - 1;
+	tmax = 255;
+	timing->hs_exit = linear_inter(tmax, tmin, 10, 0, false);
+
+	tmin = 1;
+	tmax = 32;
+	timing->shared_timings.clk_post = linear_inter(tmax, tmin, 80, 0, false);
+
+	tmin = min_t(s32, 64, S_DIV_ROUND_UP(262 * coeff, ui_x7) - 1);
+	tmax = 64;
+	timing->shared_timings.clk_pre = linear_inter(tmax, tmin, 20, 0, false);
+
+	DBG("%d, %d, %d, %d, %d",
+		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+		timing->clk_prepare, timing->hs_exit, timing->hs_rqst);
+
+	return 0;
+}
+
 static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
 {
 	struct regulator_bulk_data *s = phy->supplies;
@@ -626,6 +672,7 @@ static int dsi_phy_driver_probe(struct platform_device *pdev)
 	struct msm_dsi_phy *phy;
 	struct device *dev = &pdev->dev;
 	const struct of_device_id *match;
+	u32 phy_type;
 	int ret;
 
 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
@@ -657,6 +704,8 @@ static int dsi_phy_driver_probe(struct platform_device *pdev)
 
 	phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
 				"qcom,dsi-phy-regulator-ldo-mode");
+	if (!of_property_read_u32(dev->of_node, "phy-type", &phy_type))
+		phy->cphy_mode = (phy_type == PHY_TYPE_CPHY);
 
 	phy->base = msm_ioremap_size(pdev, "dsi_phy", "DSI_PHY", &phy->base_size);
 	if (IS_ERR(phy->base)) {