Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2

3 files changed, 22 insertions, 10 deletions

diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
index 8698e08313e1..f2021b23554d 100644
--- a/drivers/gpu/drm/stm/drv.c
+++ b/drivers/gpu/drm/stm/drv.c
@@ -148,16 +148,16 @@ static int stm_drm_platform_probe(struct platform_device *pdev)
 
 	ret = drv_load(ddev);
 	if (ret)
-		goto err_unref;
+		goto err_put;
 
 	ret = drm_dev_register(ddev, 0);
 	if (ret)
-		goto err_unref;
+		goto err_put;
 
 	return 0;
 
-err_unref:
-	drm_dev_unref(ddev);
+err_put:
+	drm_dev_put(ddev);
 
 	return ret;
 }
@@ -170,7 +170,7 @@ static int stm_drm_platform_remove(struct platform_device *pdev)
 
 	drm_dev_unregister(ddev);
 	drv_unload(ddev);
-	drm_dev_unref(ddev);
+	drm_dev_put(ddev);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index d997a6014d6c..808d9fb627e9 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -457,6 +457,14 @@ ltdc_crtc_mode_valid(struct drm_crtc *crtc,
 	int target_max = target + CLK_TOLERANCE_HZ;
 	int result;
 
+	result = clk_round_rate(ldev->pixel_clk, target);
+
+	DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result);
+
+	/* Filter modes according to the max frequency supported by the pads */
+	if (result > ldev->caps.pad_max_freq_hz)
+		return MODE_CLOCK_HIGH;
+
 	/*
 	 * Accept all "preferred" modes:
 	 * - this is important for panels because panel clock tolerances are
@@ -468,10 +476,6 @@ ltdc_crtc_mode_valid(struct drm_crtc *crtc,
 	if (mode->type & DRM_MODE_TYPE_PREFERRED)
 		return MODE_OK;
 
-	result = clk_round_rate(ldev->pixel_clk, target);
-
-	DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result);
-
 	/*
 	 * Filter modes according to the clock value, particularly useful for
 	 * hdmi modes that require precise pixel clocks.
@@ -991,11 +995,15 @@ static int ltdc_get_caps(struct drm_device *ddev)
 		 * does not work on 2nd layer.
 		 */
 		ldev->caps.non_alpha_only_l1 = true;
+		ldev->caps.pad_max_freq_hz = 90000000;
+		if (ldev->caps.hw_version == HWVER_10200)
+			ldev->caps.pad_max_freq_hz = 65000000;
 		break;
 	case HWVER_20101:
 		ldev->caps.reg_ofs = REG_OFS_4;
 		ldev->caps.pix_fmt_hw = ltdc_pix_fmt_a1;
 		ldev->caps.non_alpha_only_l1 = false;
+		ldev->caps.pad_max_freq_hz = 150000000;
 		break;
 	default:
 		return -ENODEV;
@@ -1074,8 +1082,11 @@ int ltdc_load(struct drm_device *ddev)
 		}
 	}
 
-	if (!IS_ERR(rstc))
+	if (!IS_ERR(rstc)) {
+		reset_control_assert(rstc);
+		usleep_range(10, 20);
 		reset_control_deassert(rstc);
+	}
 
 	/* Disable interrupts */
 	reg_clear(ldev->regs, LTDC_IER,
diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
index 1e16d6afb0d2..d5afb8960867 100644
--- a/drivers/gpu/drm/stm/ltdc.h
+++ b/drivers/gpu/drm/stm/ltdc.h
@@ -18,6 +18,7 @@ struct ltdc_caps {
 	u32 bus_width;		/* bus width (32 or 64 bits) */
 	const u32 *pix_fmt_hw;	/* supported pixel formats */
 	bool non_alpha_only_l1; /* non-native no-alpha formats on layer 1 */
+	int pad_max_freq_hz;	/* max frequency supported by pad */
 };
 
 #define LTDC_MAX_LAYER	4