media: dvb-frontends: add LNBH29 LNB supply driver

Add support for STMicroelectronics LNBH29 LNB supply driver.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

1 files changed, 168 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/lnbh29.c b/drivers/media/dvb-frontends/lnbh29.c
new file mode 100644
index 000000000000..410bae099c32
--- /dev/null
+++ b/drivers/media/dvb-frontends/lnbh29.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Driver for LNB supply and control IC STMicroelectronics LNBH29
+//
+// Copyright (c) 2018 Socionext Inc.
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+#include <media/dvb_frontend.h>
+#include "lnbh29.h"
+
+/**
+ * struct lnbh29_priv - LNBH29 driver private data
+ * @i2c:         Pointer to the I2C adapter structure
+ * @i2c_address: I2C address of LNBH29 chip
+ * @config:      Registers configuration
+ *               offset 0: 1st register address, always 0x01 (DATA)
+ *               offset 1: DATA register value
+ */
+struct lnbh29_priv {
+	struct i2c_adapter *i2c;
+	u8 i2c_address;
+	u8 config[2];
+};
+
+#define LNBH29_STATUS_OLF     BIT(0)
+#define LNBH29_STATUS_OTF     BIT(1)
+#define LNBH29_STATUS_VMON    BIT(2)
+#define LNBH29_STATUS_PNG     BIT(3)
+#define LNBH29_STATUS_PDO     BIT(4)
+#define LNBH29_VSEL_MASK      GENMASK(2, 0)
+#define LNBH29_VSEL_0         0x00
+/* Min: 13.188V, Typ: 13.667V, Max:14V */
+#define LNBH29_VSEL_13        0x03
+/* Min: 18.158V, Typ: 18.817V, Max:19.475V */
+#define LNBH29_VSEL_18        0x07
+
+static int lnbh29_read_vmon(struct lnbh29_priv *priv)
+{
+	u8 addr = 0x00;
+	u8 status[2];
+	int ret;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = priv->i2c_address,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr
+		}, {
+			.addr = priv->i2c_address,
+			.flags = I2C_M_RD,
+			.len = sizeof(status),
+			.buf = status
+		}
+	};
+
+	ret = i2c_transfer(priv->i2c, msg, 2);
+	if (ret >= 0 && ret != 2)
+		ret = -EIO;
+	if (ret < 0) {
+		dev_dbg(&priv->i2c->dev, "LNBH29 I2C transfer failed (%d)\n",
+			ret);
+		return ret;
+	}
+
+	if (status[0] & (LNBH29_STATUS_OLF | LNBH29_STATUS_VMON)) {
+		dev_err(&priv->i2c->dev,
+			"LNBH29 voltage in failure state, status reg 0x%x\n",
+			status[0]);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int lnbh29_set_voltage(struct dvb_frontend *fe,
+			      enum fe_sec_voltage voltage)
+{
+	struct lnbh29_priv *priv = fe->sec_priv;
+	u8 data_reg;
+	int ret;
+	struct i2c_msg msg = {
+		.addr = priv->i2c_address,
+		.flags = 0,
+		.len = sizeof(priv->config),
+		.buf = priv->config
+	};
+
+	switch (voltage) {
+	case SEC_VOLTAGE_OFF:
+		data_reg = LNBH29_VSEL_0;
+		break;
+	case SEC_VOLTAGE_13:
+		data_reg = LNBH29_VSEL_13;
+		break;
+	case SEC_VOLTAGE_18:
+		data_reg = LNBH29_VSEL_18;
+		break;
+	default:
+		return -EINVAL;
+	}
+	priv->config[1] &= ~LNBH29_VSEL_MASK;
+	priv->config[1] |= data_reg;
+
+	ret = i2c_transfer(priv->i2c, &msg, 1);
+	if (ret >= 0 && ret != 1)
+		ret = -EIO;
+	if (ret < 0) {
+		dev_err(&priv->i2c->dev, "LNBH29 I2C transfer error (%d)\n",
+			ret);
+		return ret;
+	}
+
+	/* Soft-start time (Vout 0V to 18V) is Typ. 6ms. */
+	usleep_range(6000, 20000);
+
+	if (voltage == SEC_VOLTAGE_OFF)
+		return 0;
+
+	return lnbh29_read_vmon(priv);
+}
+
+static void lnbh29_release(struct dvb_frontend *fe)
+{
+	lnbh29_set_voltage(fe, SEC_VOLTAGE_OFF);
+	kfree(fe->sec_priv);
+	fe->sec_priv = NULL;
+}
+
+struct dvb_frontend *lnbh29_attach(struct dvb_frontend *fe,
+				   struct lnbh29_config *cfg,
+				   struct i2c_adapter *i2c)
+{
+	struct lnbh29_priv *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return NULL;
+
+	priv->i2c_address = (cfg->i2c_address >> 1);
+	priv->i2c = i2c;
+	priv->config[0] = 0x01;
+	priv->config[1] = cfg->data_config;
+	fe->sec_priv = priv;
+
+	if (lnbh29_set_voltage(fe, SEC_VOLTAGE_OFF)) {
+		dev_err(&i2c->dev, "no LNBH29 found at I2C addr 0x%02x\n",
+			priv->i2c_address);
+		kfree(priv);
+		fe->sec_priv = NULL;
+		return NULL;
+	}
+
+	fe->ops.release_sec = lnbh29_release;
+	fe->ops.set_voltage = lnbh29_set_voltage;
+
+	dev_info(&i2c->dev, "LNBH29 attached at I2C addr 0x%02x\n",
+		 priv->i2c_address);
+
+	return fe;
+}
+EXPORT_SYMBOL(lnbh29_attach);
+
+MODULE_AUTHOR("Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>");
+MODULE_DESCRIPTION("STMicroelectronics LNBH29 driver");
+MODULE_LICENSE("GPL v2");