diff options
| author |   Sakari Ailus <sakari.ailus@linux.intel.com> | 2020-02-11 14:22:51 -0300 |
|---|---|---|
| committer |   Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2020-02-27 17:49:04 -0300 |
| commit | 7cbeb2e1bf0c0972d7ff09af1f37e77bfac680ce (patch) | |
| tree | 84738959fade011ef3174f924f726e023503d755 /drivers/media/i2c | |
| parent | media: smiapp: Refactor reading SMIA limits (diff) | |
| download | wireguard-linux-7cbeb2e1bf0c0972d7ff09af1f37e77bfac680ce.tar.xz wireguard-linux-7cbeb2e1bf0c0972d7ff09af1f37e77bfac680ce.zip | |
media: smiapp: Move definitions under driver directory
include/media/i2c/smiapp.h was meant to serve systems where the sensor is
enumerated through platform data. That's no longer necessary, hopefully
not even in out-of-tree use cases. Move the definitions to the appropriate
headers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Diffstat (limited to 'drivers/media/i2c')
| -rw-r--r-- | drivers/media/i2c/smiapp/smiapp-reg.h | 4 | ||||
| -rw-r--r-- | drivers/media/i2c/smiapp/smiapp.h | 44 |
2 files changed, 47 insertions, 1 deletions
diff --git a/drivers/media/i2c/smiapp/smiapp-reg.h b/drivers/media/i2c/smiapp/smiapp-reg.h index 43505cd0616e..e6f96309786f 100644 --- a/drivers/media/i2c/smiapp/smiapp-reg.h +++ b/drivers/media/i2c/smiapp/smiapp-reg.h @@ -35,6 +35,10 @@ #define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE BIT(0) #define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE BIT(1) +#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK 0 +#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE 1 +#define SMIAPP_CSI_SIGNALLING_MODE_CSI2 2 + #define SMIAPP_DPHY_CTRL_AUTOMATIC 0 /* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */ #define SMIAPP_DPHY_CTRL_UI 1 diff --git a/drivers/media/i2c/smiapp/smiapp.h b/drivers/media/i2c/smiapp/smiapp.h index 4837d80dc453..6f469934f9e3 100644 --- a/drivers/media/i2c/smiapp/smiapp.h +++ b/drivers/media/i2c/smiapp/smiapp.h @@ -14,7 +14,6 @@ #include <linux/mutex.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-subdev.h> -#include <media/i2c/smiapp.h> #include "smiapp-pll.h" #include "smiapp-reg.h" @@ -42,6 +41,49 @@ #define SMIAPP_COLOUR_COMPONENTS 4 +#define SMIAPP_NAME "smiapp" + +#define SMIAPP_DFL_I2C_ADDR (0x20 >> 1) /* Default I2C Address */ +#define SMIAPP_ALT_I2C_ADDR (0x6e >> 1) /* Alternate I2C Address */ + +/* + * Sometimes due to board layout considerations the camera module can be + * mounted rotated. The typical rotation used is 180 degrees which can be + * corrected by giving a default H-FLIP and V-FLIP in the sensor readout. + * FIXME: rotation also changes the bayer pattern. + */ +enum smiapp_module_board_orient { + SMIAPP_MODULE_BOARD_ORIENT_0 = 0, + SMIAPP_MODULE_BOARD_ORIENT_180, +}; + +struct smiapp_flash_strobe_parms { + u8 mode; + u32 strobe_width_high_us; + u16 strobe_delay; + u16 stobe_start_point; + u8 trigger; +}; + +struct smiapp_hwconfig { + /* + * Change the cci address if i2c_addr_alt is set. + * Both default and alternate cci addr need to be present + */ + unsigned short i2c_addr_dfl; /* Default i2c addr */ + unsigned short i2c_addr_alt; /* Alternate i2c addr */ + + uint32_t ext_clk; /* sensor external clk */ + + unsigned int lanes; /* Number of CSI-2 lanes */ + uint32_t csi_signalling_mode; /* SMIAPP_CSI_SIGNALLING_MODE_* */ + uint64_t *op_sys_clock; + + enum smiapp_module_board_orient module_board_orient; + + struct smiapp_flash_strobe_parms *strobe_setup; +}; + #include "smiapp-limits.h" struct smiapp_quirk; |