aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/net/bonding/bond_main.c
diff options
context:
space:
mode:
authorNikolay Aleksandrov <razor@blackwall.org>2023-03-15 13:18:40 +0200
committerDavid S. Miller <davem@davemloft.net>2023-03-17 07:56:41 +0000
commit9ec7eb60dcbcb6c41076defbc5df7bbd95ceaba5 (patch)
tree48a7b835450c84174ac2b42da6e2c282bf518053 /drivers/net/bonding/bond_main.c
parentMerge branch 'net-renesas-rswitch-fixes' (diff)
downloadwireguard-linux-9ec7eb60dcbcb6c41076defbc5df7bbd95ceaba5.tar.xz
wireguard-linux-9ec7eb60dcbcb6c41076defbc5df7bbd95ceaba5.zip
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
Add bond_ether_setup helper which is used to fix ether_setup() calls in the bonding driver. It takes care of both IFF_MASTER and IFF_SLAVE flags, the former is always restored and the latter only if it was set. If the bond enslaves non-ARPHRD_ETHER device (changes its type), then releases it and enslaves ARPHRD_ETHER device (changes back) then we use ether_setup() to restore the bond device type but it also resets its flags and removes IFF_MASTER and IFF_SLAVE[1]. Use the bond_ether_setup helper to restore both after such transition. [1] reproduce (nlmon is non-ARPHRD_ETHER): $ ip l add nlmon0 type nlmon $ ip l add bond2 type bond mode active-backup $ ip l set nlmon0 master bond2 $ ip l set nlmon0 nomaster $ ip l add bond1 type bond (we use bond1 as ARPHRD_ETHER device to restore bond2's mode) $ ip l set bond1 master bond2 $ ip l sh dev bond2 37: bond2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether be:d7:c5:40:5b:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500 (notice bond2's IFF_MASTER is missing) Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to '')
-rw-r--r--drivers/net/bonding/bond_main.c19
1 files changed, 15 insertions, 4 deletions
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 00646aa315c3..4bd911f9d3f9 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1775,6 +1775,19 @@ void bond_lower_state_changed(struct slave *slave)
slave_err(bond_dev, slave_dev, "Error: %s\n", errmsg); \
} while (0)
+/* The bonding driver uses ether_setup() to convert a master bond device
+ * to ARPHRD_ETHER, that resets the target netdevice's flags so we always
+ * have to restore the IFF_MASTER flag, and only restore IFF_SLAVE if it was set
+ */
+static void bond_ether_setup(struct net_device *bond_dev)
+{
+ unsigned int slave_flag = bond_dev->flags & IFF_SLAVE;
+
+ ether_setup(bond_dev);
+ bond_dev->flags |= IFF_MASTER | slave_flag;
+ bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+}
+
/* enslave device <slave> to bond device <master> */
int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
struct netlink_ext_ack *extack)
@@ -1866,10 +1879,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
if (slave_dev->type != ARPHRD_ETHER)
bond_setup_by_slave(bond_dev, slave_dev);
- else {
- ether_setup(bond_dev);
- bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
- }
+ else
+ bond_ether_setup(bond_dev);
call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE,
bond_dev);