diff options
| author |   Vadim Pasternak <vadimp@mellanox.com> | 2020-07-28 13:20:15 +0300 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2020-07-28 13:28:02 -0700 |
| commit | 6af496adcbb8d4656b90a85401eeceb88d520c0d (patch) | |
| tree | e4c7948d7e2ecbf0292e211d7c01a4f719ea01bb /drivers/net/ethernet/mellanox/mlxsw/reg.h | |
| parent | Merge tag 'mlx5-updates-2020-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux (diff) | |
| download | wireguard-linux-6af496adcbb8d4656b90a85401eeceb88d520c0d.tar.xz wireguard-linux-6af496adcbb8d4656b90a85401eeceb88d520c0d.zip | |
mlxsw: core: Add ethtool support for QSFP-DD transceivers
The Quad Small Form Factor Pluggable Double Density (QSFP-DD) hardware
specification defines a form factor that supports up to 400 Gbps in
aggregate over an 8x50-Gbps electrical interface. The QSFP-DD supports
both optical and copper interfaces.
Implementation is based on Common Management Interface Specification;
Rev 4.0 May 8, 2019. Table 8-2 "Identifier and Status Summary (Lower
Page)" from this spec defines "Id and Status" fields located at offsets
00h - 02h. Bit 2 at offset 02h ("Flat_mem") specifies QSFP EEPROM memory
mode, which could be "upper memory flat" or "paged". Flat memory mode is
coded "1", and indicates that only page 00h is implemented in EEPROM.
Paged memory is coded "0" and indicates that pages 00h, 01h, 02h, 10h
and 11h are implemented. Pages 10h and 11h are currently not supported
by the driver.
"Flat" memory mode is used for the passive copper transceivers. For this
type only page 00h (256 bytes) is available. "Paged" memory is used for
the optical transceivers. For this type pages 00h (256 bytes), 01h (128
bytes) and 02h (128 bytes) are available. Upper page 01h contains static
advertising field, while upper page 02h contains the module-defined
thresholds and lane-specific monitors.
Extend enumerator 'mlxsw_reg_mcia_eeprom_module_info_id' with additional
field 'MLXSW_REG_MCIA_EEPROM_MODULE_INFO_TYPE_ID'. This field is used to
indicate for QSFP-DD transceiver type which memory mode is to be used.
Expose 256 bytes buffer for QSFP-DD passive copper transceiver and
512 bytes buffer for optical.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 3c5b25495751..0638dfb23b7e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -8607,6 +8607,7 @@ MLXSW_ITEM32(reg, mcia, size, 0x08, 0, 16); #define MLXSW_REG_MCIA_TH_PAGE_NUM 3 #define MLXSW_REG_MCIA_PAGE0_LO 0 #define MLXSW_REG_MCIA_TH_PAGE_OFF 0x80 +#define MLXSW_REG_MCIA_EEPROM_CMIS_FLAT_MEMORY BIT(7) enum mlxsw_reg_mcia_eeprom_module_info_rev_id { MLXSW_REG_MCIA_EEPROM_MODULE_INFO_REV_ID_UNSPC = 0x00, @@ -8625,6 +8626,7 @@ enum mlxsw_reg_mcia_eeprom_module_info_id { enum mlxsw_reg_mcia_eeprom_module_info { MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID, MLXSW_REG_MCIA_EEPROM_MODULE_INFO_REV_ID, + MLXSW_REG_MCIA_EEPROM_MODULE_INFO_TYPE_ID, MLXSW_REG_MCIA_EEPROM_MODULE_INFO_SIZE, }; |