Merge tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Enable erase/discard/trim support for all (e)MMC/SD hosts
   - Export information through sysfs about enhanced RPMB support (eMMC v5.1+)
   - Align the initialization commands for SDIO cards
   - Fix SDIO initialization to prevent memory leaks and NULL pointer errors
   - Do not export undefined MMC_NAME/MODALIAS for SDIO cards
   - Export device/vendor field from common CIS for SDIO cards
   - Move SDIO IDs from functional drivers to the common SDIO header
   - Introduce the ->request_atomic() host ops

  MMC host:
   - Improve support for HW busy signaling for several hosts
   - Converting some DT bindings to the json-schema
   - meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller
   - meson-mx-sdio: Run a soft reset to recover from timeout/CRC error
   - mmci: Convert to use mmc_regulator_set_vqmmc()
   - mmci_stm32_sdmmc: Fix a couple of DMA bugs
   - mmci_stm32_sdmmc: Fix power on issue
   - renesas,mmcif,sdhci: Document r8a7742 DT bindings
   - renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions
   - renesas_sdhi: Improvements to the TAP selection
   - renesas_sdhi/tmio: Further fixup runtime PM management at ->remove()
   - sdhci: Introduce ops to dump vendor specific registers
   - sdhci-cadence: Fix PHY write sequence
   - sdhci-esdhc-imx: Improve tunings
   - sdhci-esdhc-imx: Enable GPIO card detect as system wakeup
   - sdhci-esdhc-imx: Add HS400 support for i.MX6SLL
   - sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller
   - m68k: mcf5441x: Add platform data to enable esdhc mmc controller
   - sdhci-msm: Improve HS400 tuning
   - sdhci-msm: Dump vendor specific registers at error
   - sdhci-msm: Add support for DLL/DDR properties provided from DT
   - sdhci-msm: Add support for the sm8250 variant
   - sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate()
   - sdhci-of-arasan: Add support for Intel Keem Bay variant
   - sdhci-of-arasan: Add support for Xilinx Versal SD variant
   - sdhci-of-dwcmshc: Add support for system suspend/resume
   - sdhci-of-dwcmshc: Fix UHS signaling support
   - sdhci-of-esdhc: Fix tuning for eMMC HS400 mode
   - sdhci-pci-gli: Add Genesys Logic GL9763E support
   - sdhci-sprd: Add support for the ->request_atomic() ops
   - sdhci-tegra: Avoid reading autocal timeout values when not applicable

  MEMSTICK:
   - Minor trivial update"

* tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (127 commits)
  dt-bindings: mmc: Convert sdhci-pxa to json-schema
  mmc: sdhci-msm: Clear tuning done flag while hs400 tuning
  mmc: core: Export device/vendor ids from Common CIS for SDIO cards
  mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cards
  mmc: sdhci-of-at91: fix CALCR register being rewritten
  mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning
  mmc: sdhci-esdhc-imx: fix the mask for tuning start point
  mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pin
  mmc: mmci_sdmmc: fix DMA API warning max segment size
  mmc: mmci_sdmmc: fix DMA API warning overlapping mappings
  mmc: sdhci-of-arasan: Add support for Intel Keem Bay
  dt-bindings: mmc: arasan: Add compatible strings for Intel Keem Bay
  mmc: sdhci-cadence: fix PHY write
  mmc: sdio: Sort all SDIO IDs in common include file
  mmc: sdio: Fix Cypress SDIO IDs macros in common include file
  mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file
  mmc: sdio: Move SDIO IDs from ath10k driver to common include file
  mmc: sdio: Move SDIO IDs from ath6kl driver to common include file
  mmc: sdio: Move SDIO IDs from smssdio driver to common include file
  mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file
  ...

1 files changed, 7 insertions, 4 deletions

diff --git a/drivers/staging/greybus/sdio.c b/drivers/staging/greybus/sdio.c
index 68c5718be827..0939f4a4c963 100644
--- a/drivers/staging/greybus/sdio.c
+++ b/drivers/staging/greybus/sdio.c
@@ -67,7 +67,6 @@ static void _gb_sdio_set_host_caps(struct gb_sdio_host *host, u32 r)
 		((r & GB_SDIO_CAP_8_BIT_DATA) ? MMC_CAP_8_BIT_DATA : 0) |
 		((r & GB_SDIO_CAP_MMC_HS) ? MMC_CAP_MMC_HIGHSPEED : 0) |
 		((r & GB_SDIO_CAP_SD_HS) ? MMC_CAP_SD_HIGHSPEED : 0) |
-		((r & GB_SDIO_CAP_ERASE) ? MMC_CAP_ERASE : 0) |
 		((r & GB_SDIO_CAP_1_2V_DDR) ? MMC_CAP_1_2V_DDR : 0) |
 		((r & GB_SDIO_CAP_1_8V_DDR) ? MMC_CAP_1_8V_DDR : 0) |
 		((r & GB_SDIO_CAP_POWER_OFF_CARD) ? MMC_CAP_POWER_OFF_CARD : 0) |
@@ -411,6 +410,7 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 	struct gb_sdio_command_request request = {0};
 	struct gb_sdio_command_response response;
 	struct mmc_data *data = host->mrq->data;
+	unsigned int timeout_ms;
 	u8 cmd_flags;
 	u8 cmd_type;
 	int i;
@@ -469,9 +469,12 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 		request.data_blksz = cpu_to_le16(data->blksz);
 	}
 
-	ret = gb_operation_sync(host->connection, GB_SDIO_TYPE_COMMAND,
-				&request, sizeof(request), &response,
-				sizeof(response));
+	timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+		GB_OPERATION_TIMEOUT_DEFAULT;
+
+	ret = gb_operation_sync_timeout(host->connection, GB_SDIO_TYPE_COMMAND,
+					&request, sizeof(request), &response,
+					sizeof(response), timeout_ms);
 	if (ret < 0)
 		goto out;