diff options
| author |   Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-09-05 07:59:28 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-09-05 07:59:28 +0200 |
| commit | 35f2e3c267f07a42bc1bf08081e963b3a33e6d7c (patch) | |
| tree | cab274350db930656d6ea9a0c9989f210acf4722 /drivers/tty/serial | |
| parent | tty: mxser: remove redundant assignment to hwid (diff) | |
| parent | Linux 6.0-rc4 (diff) | |
| download | wireguard-linux-35f2e3c267f07a42bc1bf08081e963b3a33e6d7c.tar.xz wireguard-linux-35f2e3c267f07a42bc1bf08081e963b3a33e6d7c.zip | |
Merge 6.0-rc4 into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 5 |
2 files changed, 4 insertions, 5 deletions
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index a85169aa839d..ab4a9dfae07d 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -294,9 +294,6 @@ static int atmel_config_rs485(struct uart_port *port, struct ktermios *termios, mode = atmel_uart_readl(port, ATMEL_US_MR); - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); if (rs485conf->flags & SER_RS485_RX_DURING_TX) @@ -306,6 +303,7 @@ static int atmel_config_rs485(struct uart_port *port, struct ktermios *termios, atmel_uart_writel(port, ATMEL_US_TTGR, rs485conf->delay_rts_after_send); + mode &= ~ATMEL_US_USMODE; mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index c8a010c41e39..f21915015d67 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1389,9 +1389,9 @@ static int lpuart_config_rs485(struct uart_port *port, struct ktermios *termios, * Note: UART is assumed to be active high. */ if (rs485->flags & SER_RS485_RTS_ON_SEND) - modem &= ~UARTMODEM_TXRTSPOL; - else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) modem |= UARTMODEM_TXRTSPOL; + else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) + modem &= ~UARTMODEM_TXRTSPOL; } writeb(modem, sport->port.membase + UARTMODEM); @@ -2186,6 +2186,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, uart_update_timeout(port, termios->c_cflag, baud); /* wait transmit engin complete */ + lpuart32_write(&sport->port, 0, UARTMODIR); lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC); /* disable transmit and receive */ |