diff options
| author |   satya priya <skakit@codeaurora.org> | 2020-05-29 15:44:42 +0530 |
|---|---|---|
| committer |   Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-05-29 13:49:02 +0200 |
| commit | a1b44ea340b21c99b34c93acad233da727cb88ba (patch) | |
| tree | da92fc13a819ae1aea6ebfa579cc988ec5144e51 /drivers/tty | |
| parent | tty: serial: imx: clear Ageing Timer Interrupt in handler (diff) | |
| download | wireguard-linux-a1b44ea340b21c99b34c93acad233da727cb88ba.tar.xz wireguard-linux-a1b44ea340b21c99b34c93acad233da727cb88ba.zip | |
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
To support BT use case over UART at baud rate of 3.2 Mbps,
we need SE clocks to run at 51.2MHz frequency. Previously this
frequency was not available in clk src, so, we were requesting
for 102.4 MHz and dividing it internally by 2 to get 51.2MHz.
As now 51.2MHz frequency is made available in clk src,
adding this frequency to UART frequency table.
We will save significant amount of power, if 51.2 is used
because it belongs to LowSVS range whereas 102.4 fall into
Nominal category.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1590747282-5487-1-git-send-email-skakit@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/qcom_geni_serial.c | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 6119090ce045..168e1c0c0ae3 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -141,9 +141,10 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport); static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop); static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200, - 32000000, 48000000, 64000000, 80000000, - 96000000, 100000000, 102400000, - 112000000, 120000000, 128000000}; + 32000000, 48000000, 51200000, 64000000, + 80000000, 96000000, 100000000, + 102400000, 112000000, 120000000, + 128000000}; #define to_dev_port(ptr, member) \ container_of(ptr, struct qcom_geni_serial_port, member) |