diff options
| author |   Yu Chen <chenyu56@huawei.com> | 2020-05-21 16:46:43 +0800 |
|---|---|---|
| committer |   Felipe Balbi <balbi@kernel.org> | 2020-05-25 11:09:43 +0300 |
| commit | 1c0e69ae1b9f9004fd72978612ae3463791edc56 (patch) | |
| tree | 0caa077b404d0deb8f07f7d9f55dd67e589be1f3 /drivers/usb | |
| parent | USB: dummy-hcd: use configurable endpoint naming scheme (diff) | |
| download | wireguard-linux-1c0e69ae1b9f9004fd72978612ae3463791edc56.tar.xz wireguard-linux-1c0e69ae1b9f9004fd72978612ae3463791edc56.zip | |
usb: dwc3: Increase timeout for CmdAct cleared by device controller
If the SS PHY is in P3, there is no pipe_clk, HW may use suspend_clk
for function, as suspend_clk is slow so EP command need more time to
complete, e.g, imx8M suspend_clk is 32K, set ep configuration will
take about 380us per below trace time stamp(44.286278 - 44.285897
= 0.000381):
configfs_acm.sh-822 [000] d..1 44.285896: dwc3_writel: addr
000000006d59aae1 value 00000401
configfs_acm.sh-822 [000] d..1 44.285897: dwc3_readl: addr
000000006d59aae1 value 00000401
... ...
configfs_acm.sh-822 [000] d..1 44.286278: dwc3_readl: addr
000000006d59aae1 value 00000001
configfs_acm.sh-822 [000] d..1 44.286279: dwc3_gadget_ep_cmd:
ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000
00000500 00000000 --> status: Successful
This was originally found on Hisilicon Kirin Soc that need more time
for the device controller to clear the CmdAct of DEPCMD.
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index fea4fde1b5e3..7739fe054e34 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -273,7 +273,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, { const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; struct dwc3 *dwc = dep->dwc; - u32 timeout = 1000; + u32 timeout = 5000; u32 saved_config = 0; u32 reg; |