Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6629/2: aaec2000: remove support for mach-aaec2000
  ARM: lh7a40x: remove unmaintained platform support

Fix up trivial conflicts in
 - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed)
 - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)

14 files changed, 0 insertions, 3531 deletions

diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index ee747919a766..68d48ab6eacf 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -206,68 +206,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define RPC_LSA_DEFAULT		RPC_LED_TX_RX
 #define RPC_LSB_DEFAULT		RPC_LED_100_10
 
-#elif   defined(CONFIG_MACH_LPD79520) ||	\
-	defined(CONFIG_MACH_LPD7A400) ||	\
-	defined(CONFIG_MACH_LPD7A404)
-
-/* The LPD7X_IOBARRIER is necessary to overcome a mismatch between the
- * way that the CPU handles chip selects and the way that the SMC chip
- * expects the chip select to operate.  Refer to
- * Documentation/arm/Sharp-LH/IOBarrier for details.  The read from
- * IOBARRIER is a byte, in order that we read the least-common
- * denominator.  It would be wasteful to read 32 bits from an 8-bit
- * accessible region.
- *
- * There is no explicit protection against interrupts intervening
- * between the writew and the IOBARRIER.  In SMC ISR there is a
- * preamble that performs an IOBARRIER in the extremely unlikely event
- * that the driver interrupts itself between a writew to the chip an
- * the IOBARRIER that follows *and* the cache is large enough that the
- * first off-chip access while handing the interrupt is to the SMC
- * chip.  Other devices in the same address space as the SMC chip must
- * be aware of the potential for trouble and perform a similar
- * IOBARRIER on entry to their ISR.
- */
-
-#include <mach/constants.h>	/* IOBARRIER_VIRT */
-
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_NOWAIT		0
-#define LPD7X_IOBARRIER		readb (IOBARRIER_VIRT)
-
-#define SMC_inw(a,r)\
-   ({ unsigned short v = readw ((void*) ((a) + (r))); LPD7X_IOBARRIER; v; })
-#define SMC_outw(v,a,r)	  ({ writew ((v), (a) + (r)); LPD7X_IOBARRIER; })
-
-#define SMC_insw		LPD7_SMC_insw
-static inline void LPD7_SMC_insw (unsigned char* a, int r,
-				  unsigned char* p, int l)
-{
-	unsigned short* ps = (unsigned short*) p;
-	while (l-- > 0) {
-		*ps++ = readw (a + r);
-		LPD7X_IOBARRIER;
-	}
-}
-
-#define SMC_outsw		LPD7_SMC_outsw
-static inline void LPD7_SMC_outsw (unsigned char* a, int r,
-				   unsigned char* p, int l)
-{
-	unsigned short* ps = (unsigned short*) p;
-	while (l-- > 0) {
-		writew (*ps++, a + r);
-		LPD7X_IOBARRIER;
-	}
-}
-
-#define SMC_INTERRUPT_PREAMBLE	LPD7X_IOBARRIER
-
-#define RPC_LSA_DEFAULT		RPC_LED_TX_RX
-#define RPC_LSB_DEFAULT		RPC_LED_100_10
-
 #elif	defined(CONFIG_ARCH_VERSATILE)
 
 #define SMC_CAN_USE_8BIT	1
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index d9ccbf825095..e461be164f67 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1110,29 +1110,6 @@ config SERIAL_PMACZILOG_CONSOLE
 	  on your (Power)Mac as the console, you can do so by answering
 	  Y to this option.
 
-config SERIAL_LH7A40X
-	tristate "Sharp LH7A40X embedded UART support"
-	depends on ARM && ARCH_LH7A40X
-	select SERIAL_CORE
-	help
-	  This enables support for the three on-board UARTs of the
-	  Sharp LH7A40X series CPUs.  Choose Y or M.
-
-config SERIAL_LH7A40X_CONSOLE
-	bool "Support for console on Sharp LH7A40X serial port"
-	depends on SERIAL_LH7A40X=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you wish to use one of the serial ports as the
-	  system console--the system console is the device which
-	  receives all kernel messages and warnings and which allows
-	  logins in single user mode.
-
-	  Even if you say Y here, the currently visible framebuffer console
-	  (/dev/tty0) will still be used as the default system console, but
-	  you can alter that using a kernel command line, for example
-	  "console=ttyAM1".
-
 config SERIAL_CPM
 	tristate "CPM SCC/SMC serial port support"
 	depends on CPM2 || 8xx
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index d94dc005c8a6..31e868cb49b2 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
-obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_ZS) += zs.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
diff --git a/drivers/tty/serial/serial_lh7a40x.c b/drivers/tty/serial/serial_lh7a40x.c
deleted file mode 100644
index ea744707c4d6..000000000000
--- a/drivers/tty/serial/serial_lh7a40x.c
+++ /dev/null
@@ -1,682 +0,0 @@
-/* drivers/serial/serial_lh7a40x.c
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-/* Driver for Sharp LH7A40X embedded serial ports
- *
- *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *  Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd.
- *
- *  ---
- *
- * This driver supports the embedded UARTs of the Sharp LH7A40X series
- * CPUs.  While similar to the 16550 and other UART chips, there is
- * nothing close to register compatibility.  Moreover, some of the
- * modem control lines are not available, either in the chip or they
- * are lacking in the board-level implementation.
- *
- * - Use of SIRDIS
- *   For simplicity, we disable the IR functions of any UART whenever
- *   we enable it.
- *
- */
-
-
-#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#define DEV_MAJOR	204
-#define DEV_MINOR	16
-#define DEV_NR		3
-
-#define ISR_LOOP_LIMIT	256
-
-#define UR(p,o)	_UR ((p)->membase, o)
-#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o))))
-#define BIT_CLR(p,o,m)	UR(p,o) = UR(p,o) & (~(unsigned int)m)
-#define BIT_SET(p,o,m)	UR(p,o) = UR(p,o) | ( (unsigned int)m)
-
-#define UART_REG_SIZE	32
-
-#define UART_R_DATA	(0x00)
-#define UART_R_FCON	(0x04)
-#define UART_R_BRCON	(0x08)
-#define UART_R_CON	(0x0c)
-#define UART_R_STATUS	(0x10)
-#define UART_R_RAWISR	(0x14)
-#define UART_R_INTEN	(0x18)
-#define UART_R_ISR	(0x1c)
-
-#define UARTEN		(0x01)		/* UART enable */
-#define SIRDIS		(0x02)		/* Serial IR disable (UART1 only) */
-
-#define RxEmpty		(0x10)
-#define TxEmpty		(0x80)
-#define TxFull		(0x20)
-#define nRxRdy		RxEmpty
-#define nTxRdy		TxFull
-#define TxBusy		(0x08)
-
-#define RxBreak		(0x0800)
-#define RxOverrunError	(0x0400)
-#define RxParityError	(0x0200)
-#define RxFramingError	(0x0100)
-#define RxError     (RxBreak | RxOverrunError | RxParityError | RxFramingError)
-
-#define DCD		(0x04)
-#define DSR		(0x02)
-#define CTS		(0x01)
-
-#define RxInt		(0x01)
-#define TxInt		(0x02)
-#define ModemInt	(0x04)
-#define RxTimeoutInt	(0x08)
-
-#define MSEOI		(0x10)
-
-#define WLEN_8		(0x60)
-#define WLEN_7		(0x40)
-#define WLEN_6		(0x20)
-#define WLEN_5		(0x00)
-#define WLEN		(0x60)	/* Mask for all word-length bits */
-#define STP2		(0x08)
-#define PEN		(0x02)	/* Parity Enable */
-#define EPS		(0x04)	/* Even Parity Set */
-#define FEN		(0x10)	/* FIFO Enable */
-#define BRK		(0x01)	/* Send Break */
-
-
-struct uart_port_lh7a40x {
-	struct uart_port port;
-	unsigned int statusPrev; /* Most recently read modem status */
-};
-
-static void lh7a40xuart_stop_tx (struct uart_port* port)
-{
-	BIT_CLR (port, UART_R_INTEN, TxInt);
-}
-
-static void lh7a40xuart_start_tx (struct uart_port* port)
-{
-	BIT_SET (port, UART_R_INTEN, TxInt);
-
-	/* *** FIXME: do I need to check for startup of the
-		      transmitter?  The old driver did, but AMBA
-		      doesn't . */
-}
-
-static void lh7a40xuart_stop_rx (struct uart_port* port)
-{
-	BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
-}
-
-static void lh7a40xuart_enable_ms (struct uart_port* port)
-{
-	BIT_SET (port, UART_R_INTEN, ModemInt);
-}
-
-static void lh7a40xuart_rx_chars (struct uart_port* port)
-{
-	struct tty_struct* tty = port->state->port.tty;
-	int cbRxMax = 256;	/* (Gross) limit on receive */
-	unsigned int data;	/* Received data and status */
-	unsigned int flag;
-
-	while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) {
-		data = UR (port, UART_R_DATA);
-		flag = TTY_NORMAL;
-		++port->icount.rx;
-
-		if (unlikely(data & RxError)) {
-			if (data & RxBreak) {
-				data &= ~(RxFramingError | RxParityError);
-				++port->icount.brk;
-				if (uart_handle_break (port))
-					continue;
-			}
-			else if (data & RxParityError)
-				++port->icount.parity;
-			else if (data & RxFramingError)
-				++port->icount.frame;
-			if (data & RxOverrunError)
-				++port->icount.overrun;
-
-				/* Mask by termios, leave Rx'd byte */
-			data &= port->read_status_mask | 0xff;
-
-			if (data & RxBreak)
-				flag = TTY_BREAK;
-			else if (data & RxParityError)
-				flag = TTY_PARITY;
-			else if (data & RxFramingError)
-				flag = TTY_FRAME;
-		}
-
-		if (uart_handle_sysrq_char (port, (unsigned char) data))
-			continue;
-
-		uart_insert_char(port, data, RxOverrunError, data, flag);
-	}
-	tty_flip_buffer_push (tty);
-	return;
-}
-
-static void lh7a40xuart_tx_chars (struct uart_port* port)
-{
-	struct circ_buf* xmit = &port->state->xmit;
-	int cbTxMax = port->fifosize;
-
-	if (port->x_char) {
-		UR (port, UART_R_DATA) = port->x_char;
-		++port->icount.tx;
-		port->x_char = 0;
-		return;
-	}
-	if (uart_circ_empty (xmit) || uart_tx_stopped (port)) {
-		lh7a40xuart_stop_tx (port);
-		return;
-	}
-
-	/* Unlike the AMBA UART, the lh7a40x UART does not guarantee
-	   that at least half of the FIFO is empty.  Instead, we check
-	   status for every character.  Using the AMBA method causes
-	   the transmitter to drop characters. */
-
-	do {
-		UR (port, UART_R_DATA) = xmit->buf[xmit->tail];
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		++port->icount.tx;
-		if (uart_circ_empty(xmit))
-			break;
-	} while (!(UR (port, UART_R_STATUS) & nTxRdy)
-		 && cbTxMax--);
-
-	if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
-		uart_write_wakeup (port);
-
-	if (uart_circ_empty (xmit))
-		lh7a40xuart_stop_tx (port);
-}
-
-static void lh7a40xuart_modem_status (struct uart_port* port)
-{
-	unsigned int status = UR (port, UART_R_STATUS);
-	unsigned int delta
-		= status ^ ((struct uart_port_lh7a40x*) port)->statusPrev;
-
-	BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */
-
-	if (!delta)		/* Only happens if we missed 2 transitions */
-		return;
-
-	((struct uart_port_lh7a40x*) port)->statusPrev = status;
-
-	if (delta & DCD)
-		uart_handle_dcd_change (port, status & DCD);
-
-	if (delta & DSR)
-		++port->icount.dsr;
-
-	if (delta & CTS)
-		uart_handle_cts_change (port, status & CTS);
-
-	wake_up_interruptible (&port->state->port.delta_msr_wait);
-}
-
-static irqreturn_t lh7a40xuart_int (int irq, void* dev_id)
-{
-	struct uart_port* port = dev_id;
-	unsigned int cLoopLimit = ISR_LOOP_LIMIT;
-	unsigned int isr = UR (port, UART_R_ISR);
-
-
-	do {
-		if (isr & (RxInt | RxTimeoutInt))
-			lh7a40xuart_rx_chars(port);
-		if (isr & ModemInt)
-			lh7a40xuart_modem_status (port);
-		if (isr & TxInt)
-			lh7a40xuart_tx_chars (port);
-
-		if (--cLoopLimit == 0)
-			break;
-
-		isr = UR (port, UART_R_ISR);
-	} while (isr & (RxInt | TxInt | RxTimeoutInt));
-
-	return IRQ_HANDLED;
-}
-
-static unsigned int lh7a40xuart_tx_empty (struct uart_port* port)
-{
-	return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0;
-}
-
-static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port)
-{
-	unsigned int result = 0;
-	unsigned int status = UR (port, UART_R_STATUS);
-
-	if (status & DCD)
-		result |= TIOCM_CAR;
-	if (status & DSR)
-		result |= TIOCM_DSR;
-	if (status & CTS)
-		result |= TIOCM_CTS;
-
-	return result;
-}
-
-static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl)
-{
-	/* None of the ports supports DTR. UART1 supports RTS through GPIO. */
-	/* Note, kernel appears to be setting DTR and RTS on console. */
-
-	/* *** FIXME: this deserves more work.  There's some work in
-	       tracing all of the IO pins. */
-#if 0
-	if( port->mapbase == UART1_PHYS) {
-		gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS);
-
-		if (mctrl & TIOCM_RTS)
-			gpio->pbdr &= ~GPIOB_UART1_RTS;
-		else
-			gpio->pbdr |= GPIOB_UART1_RTS;
-	}
-#endif
-}
-
-static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-	if (break_state == -1)
-		BIT_SET (port, UART_R_FCON, BRK); /* Assert break */
-	else
-		BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int lh7a40xuart_startup (struct uart_port* port)
-{
-	int retval;
-
-	retval = request_irq (port->irq, lh7a40xuart_int, 0,
-			      "serial_lh7a40x", port);
-	if (retval)
-		return retval;
-
-				/* Initial modem control-line settings */
-	((struct uart_port_lh7a40x*) port)->statusPrev
-		= UR (port, UART_R_STATUS);
-
-	/* There is presently no configuration option to enable IR.
-	   Thus, we always disable it. */
-
-	BIT_SET (port, UART_R_CON, UARTEN | SIRDIS);
-	BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
-
-	return 0;
-}
-
-static void lh7a40xuart_shutdown (struct uart_port* port)
-{
-	free_irq (port->irq, port);
-	BIT_CLR (port, UART_R_FCON, BRK | FEN);
-	BIT_CLR (port, UART_R_CON, UARTEN);
-}
-
-static void lh7a40xuart_set_termios (struct uart_port* port,
-				     struct ktermios* termios,
-				     struct ktermios* old)
-{
-	unsigned int con;
-	unsigned int inten;
-	unsigned int fcon;
-	unsigned long flags;
-	unsigned int baud;
-	unsigned int quot;
-
-	baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16);
-	quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */
-
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		fcon = WLEN_5;
-		break;
-	case CS6:
-		fcon = WLEN_6;
-		break;
-	case CS7:
-		fcon = WLEN_7;
-		break;
-	case CS8:
-	default:
-		fcon = WLEN_8;
-		break;
-	}
-	if (termios->c_cflag & CSTOPB)
-		fcon |= STP2;
-	if (termios->c_cflag & PARENB) {
-		fcon |= PEN;
-		if (!(termios->c_cflag & PARODD))
-			fcon |= EPS;
-	}
-	if (port->fifosize > 1)
-		fcon |= FEN;
-
-	spin_lock_irqsave (&port->lock, flags);
-
-	uart_update_timeout (port, termios->c_cflag, baud);
-
-	port->read_status_mask = RxOverrunError;
-	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= RxFramingError | RxParityError;
-	if (termios->c_iflag & (BRKINT | PARMRK))
-		port->read_status_mask |= RxBreak;
-
-		/* Figure mask for status we ignore */
-	port->ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= RxFramingError | RxParityError;
-	if (termios->c_iflag & IGNBRK) {
-		port->ignore_status_mask |= RxBreak;
-		/* Ignore overrun when ignorning parity */
-		/* *** FIXME: is this in the right place? */
-		if (termios->c_iflag & IGNPAR)
-			port->ignore_status_mask |= RxOverrunError;
-	}
-
-		/* Ignore all receive errors when receive disabled */
-	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= RxError;
-
-	con   = UR (port, UART_R_CON);
-	inten = (UR (port, UART_R_INTEN) & ~ModemInt);
-
-	if (UART_ENABLE_MS (port, termios->c_cflag))
-		inten |= ModemInt;
-
-	BIT_CLR (port, UART_R_CON, UARTEN);	/* Disable UART */
-	UR (port, UART_R_INTEN) = 0;		/* Disable interrupts */
-	UR (port, UART_R_BRCON) = quot - 1;	/* Set baud rate divisor */
-	UR (port, UART_R_FCON)  = fcon;		/* Set FIFO and frame ctrl */
-	UR (port, UART_R_INTEN) = inten;	/* Enable interrupts */
-	UR (port, UART_R_CON)   = con;		/* Restore UART mode */
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char* lh7a40xuart_type (struct uart_port* port)
-{
-	return port->type == PORT_LH7A40X ? "LH7A40X" : NULL;
-}
-
-static void lh7a40xuart_release_port (struct uart_port* port)
-{
-	release_mem_region (port->mapbase, UART_REG_SIZE);
-}
-
-static int lh7a40xuart_request_port (struct uart_port* port)
-{
-	return request_mem_region (port->mapbase, UART_REG_SIZE,
-				   "serial_lh7a40x") != NULL
-		? 0 : -EBUSY;
-}
-
-static void lh7a40xuart_config_port (struct uart_port* port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE) {
-		port->type = PORT_LH7A40X;
-		lh7a40xuart_request_port (port);
-	}
-}
-
-static int lh7a40xuart_verify_port (struct uart_port* port,
-				    struct serial_struct* ser)
-{
-	int ret = 0;
-
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X)
-		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= nr_irqs)
-		ret = -EINVAL;
-	if (ser->baud_base < 9600) /* *** FIXME: is this true? */
-		ret = -EINVAL;
-	return ret;
-}
-
-static struct uart_ops lh7a40x_uart_ops = {
-	.tx_empty	= lh7a40xuart_tx_empty,
-	.set_mctrl	= lh7a40xuart_set_mctrl,
-	.get_mctrl	= lh7a40xuart_get_mctrl,
-	.stop_tx	= lh7a40xuart_stop_tx,
-	.start_tx	= lh7a40xuart_start_tx,
-	.stop_rx	= lh7a40xuart_stop_rx,
-	.enable_ms	= lh7a40xuart_enable_ms,
-	.break_ctl	= lh7a40xuart_break_ctl,
-	.startup	= lh7a40xuart_startup,
-	.shutdown	= lh7a40xuart_shutdown,
-	.set_termios	= lh7a40xuart_set_termios,
-	.type		= lh7a40xuart_type,
-	.release_port	= lh7a40xuart_release_port,
-	.request_port	= lh7a40xuart_request_port,
-	.config_port	= lh7a40xuart_config_port,
-	.verify_port	= lh7a40xuart_verify_port,
-};
-
-static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
-	{
-		.port = {
-			.membase	= (void*) io_p2v (UART1_PHYS),
-			.mapbase	= UART1_PHYS,
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_UART1INTR,
-			.uartclk	= 14745600/2,
-			.fifosize	= 16,
-			.ops		= &lh7a40x_uart_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 0,
-		},
-	},
-	{
-		.port = {
-			.membase	= (void*) io_p2v (UART2_PHYS),
-			.mapbase	= UART2_PHYS,
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_UART2INTR,
-			.uartclk	= 14745600/2,
-			.fifosize	= 16,
-			.ops		= &lh7a40x_uart_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 1,
-		},
-	},
-	{
-		.port = {
-			.membase	= (void*) io_p2v (UART3_PHYS),
-			.mapbase	= UART3_PHYS,
-			.iotype		= UPIO_MEM,
-			.irq		= IRQ_UART3INTR,
-			.uartclk	= 14745600/2,
-			.fifosize	= 16,
-			.ops		= &lh7a40x_uart_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 2,
-		},
-	},
-};
-
-#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE
-# define LH7A40X_CONSOLE NULL
-#else
-# define LH7A40X_CONSOLE &lh7a40x_console
-
-static void lh7a40xuart_console_putchar(struct uart_port *port, int ch)
-{
-	while (UR(port, UART_R_STATUS) & nTxRdy)
-		;
-	UR(port, UART_R_DATA) = ch;
-}
-
-static void lh7a40xuart_console_write (struct console* co,
-				       const char* s,
-				       unsigned int count)
-{
-	struct uart_port* port = &lh7a40x_ports[co->index].port;
-	unsigned int con = UR (port, UART_R_CON);
-	unsigned int inten = UR (port, UART_R_INTEN);
-
-
-	UR (port, UART_R_INTEN) = 0;		/* Disable all interrupts */
-	BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */
-
-	uart_console_write(port, s, count, lh7a40xuart_console_putchar);
-
-				/* Wait until all characters are sent */
-	while (UR (port, UART_R_STATUS) & TxBusy)
-		;
-
-				/* Restore control and interrupt mask */
-	UR (port, UART_R_CON) = con;
-	UR (port, UART_R_INTEN) = inten;
-}
-
-static void __init lh7a40xuart_console_get_options (struct uart_port* port,
-						    int* baud,
-						    int* parity,
-						    int* bits)
-{
-	if (UR (port, UART_R_CON) & UARTEN) {
-		unsigned int fcon = UR (port, UART_R_FCON);
-		unsigned int quot = UR (port, UART_R_BRCON) + 1;
-
-		switch (fcon & (PEN | EPS)) {
-		default:        *parity = 'n'; break;
-		case PEN:       *parity = 'o'; break;
-		case PEN | EPS: *parity = 'e'; break;
-		}
-
-		switch (fcon & WLEN) {
-		default:
-		case WLEN_8: *bits = 8; break;
-		case WLEN_7: *bits = 7; break;
-		case WLEN_6: *bits = 6; break;
-		case WLEN_5: *bits = 5; break;
-		}
-
-		*baud = port->uartclk/(16*quot);
-	}
-}
-
-static int __init lh7a40xuart_console_setup (struct console* co, char* options)
-{
-	struct uart_port* port;
-	int baud = 38400;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	if (co->index >= DEV_NR) /* Bounds check on device number */
-		co->index = 0;
-	port = &lh7a40x_ports[co->index].port;
-
-	if (options)
-		uart_parse_options (options, &baud, &parity, &bits, &flow);
-	else
-		lh7a40xuart_console_get_options (port, &baud, &parity, &bits);
-
-	return uart_set_options (port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver lh7a40x_reg;
-static struct console lh7a40x_console = {
-	.name		= "ttyAM",
-	.write		= lh7a40xuart_console_write,
-	.device		= uart_console_device,
-	.setup		= lh7a40xuart_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &lh7a40x_reg,
-};
-
-static int __init lh7a40xuart_console_init(void)
-{
-	register_console (&lh7a40x_console);
-	return 0;
-}
-
-console_initcall (lh7a40xuart_console_init);
-
-#endif
-
-static struct uart_driver lh7a40x_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "ttyAM",
-	.dev_name		= "ttyAM",
-	.major			= DEV_MAJOR,
-	.minor			= DEV_MINOR,
-	.nr			= DEV_NR,
-	.cons			= LH7A40X_CONSOLE,
-};
-
-static int __init lh7a40xuart_init(void)
-{
-	int ret;
-
-	printk (KERN_INFO "serial: LH7A40X serial driver\n");
-
-	ret = uart_register_driver (&lh7a40x_reg);
-
-	if (ret == 0) {
-		int i;
-
-		for (i = 0; i < DEV_NR; i++) {
-			/* UART3, when used, requires GPIO pin reallocation */
-			if (lh7a40x_ports[i].port.mapbase == UART3_PHYS)
-				GPIO_PINMUX |= 1<<3;
-			uart_add_one_port (&lh7a40x_reg,
-					   &lh7a40x_ports[i].port);
-		}
-	}
-	return ret;
-}
-
-static void __exit lh7a40xuart_exit(void)
-{
-	int i;
-
-	for (i = 0; i < DEV_NR; i++)
-		uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port);
-
-	uart_unregister_driver (&lh7a40x_reg);
-}
-
-module_init (lh7a40xuart_init);
-module_exit (lh7a40xuart_exit);
-
-MODULE_AUTHOR ("Marc Singer");
-MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver");
-MODULE_LICENSE ("GPL");
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index fceea5e4e02f..41b6e51188e4 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -31,7 +31,6 @@ config USB_ARCH_HAS_OHCI
 	# ARM:
 	default y if SA1111
 	default y if ARCH_OMAP
-	default y if ARCH_LH7A404
 	default y if ARCH_S3C2410
 	default y if PXA27x
 	default y if PXA3xx
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bfde50e20b30..bc5123cf41c2 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -188,18 +188,6 @@ config USB_FUSB300
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_GADGET_LH7A40X
-	boolean "LH7A40X"
-	depends on ARCH_LH7A40X
-	help
-	   This driver provides USB Device Controller driver for LH7A40x
-
-config USB_LH7A40X
-	tristate
-	depends on USB_GADGET_LH7A40X
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 config USB_GADGET_OMAP
 	boolean "OMAP USB Device Controller"
 	depends on ARCH_OMAP
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 305286e181d5..1ea15ee74fd3 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_USB_PXA27X)	+= pxa27x_udc.o
 obj-$(CONFIG_USB_IMX)		+= imx_udc.o
 obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
 obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
-obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
 obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
 obj-$(CONFIG_USB_AT91)		+= at91_udc.o
 obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 5c2720d64ffa..e896f6359dfe 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -45,12 +45,6 @@
 #define	gadget_is_goku(g)	0
 #endif
 
-#ifdef CONFIG_USB_GADGET_LH7A40X
-#define	gadget_is_lh7a40x(g)	!strcmp("lh7a40x_udc", (g)->name)
-#else
-#define	gadget_is_lh7a40x(g)	0
-#endif
-
 #ifdef CONFIG_USB_GADGET_OMAP
 #define	gadget_is_omap(g)	!strcmp("omap_udc", (g)->name)
 #else
@@ -181,8 +175,6 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x06;
 	else if (gadget_is_omap(gadget))
 		return 0x08;
-	else if (gadget_is_lh7a40x(gadget))
-		return 0x09;
 	else if (gadget_is_pxa27x(gadget))
 		return 0x11;
 	else if (gadget_is_s3c2410(gadget))
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
deleted file mode 100644
index 6b58bd8ce623..000000000000
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ /dev/null
@@ -1,2152 +0,0 @@
-/*
- * linux/drivers/usb/gadget/lh7a40x_udc.c
- * Sharp LH7A40x on-chip full speed USB device controllers
- *
- * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID
- * Copyright (C) 2004 Bo Henriksen, Nordic ID
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "lh7a40x_udc.h"
-
-//#define DEBUG printk
-//#define DEBUG_EP0 printk
-//#define DEBUG_SETUP printk
-
-#ifndef DEBUG_EP0
-# define DEBUG_EP0(fmt,args...)
-#endif
-#ifndef DEBUG_SETUP
-# define DEBUG_SETUP(fmt,args...)
-#endif
-#ifndef DEBUG
-# define NO_STATES
-# define DEBUG(fmt,args...)
-#endif
-
-#define	DRIVER_DESC			"LH7A40x USB Device Controller"
-#define	DRIVER_VERSION		__DATE__
-
-#ifndef _BIT			/* FIXME - what happended to _BIT in 2.6.7bk18? */
-#define _BIT(x) (1<<(x))
-#endif
-
-struct lh7a40x_udc *the_controller;
-
-static const char driver_name[] = "lh7a40x_udc";
-static const char driver_desc[] = DRIVER_DESC;
-static const char ep0name[] = "ep0-control";
-
-/*
-  Local definintions.
-*/
-
-#ifndef NO_STATES
-static char *state_names[] = {
-	"WAIT_FOR_SETUP",
-	"DATA_STATE_XMIT",
-	"DATA_STATE_NEED_ZLP",
-	"WAIT_FOR_OUT_STATUS",
-	"DATA_STATE_RECV"
-};
-#endif
-
-/*
-  Local declarations.
-*/
-static int lh7a40x_ep_enable(struct usb_ep *ep,
-			     const struct usb_endpoint_descriptor *);
-static int lh7a40x_ep_disable(struct usb_ep *ep);
-static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, gfp_t);
-static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *);
-static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t);
-static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *);
-static int lh7a40x_set_halt(struct usb_ep *ep, int);
-static int lh7a40x_fifo_status(struct usb_ep *ep);
-static void lh7a40x_fifo_flush(struct usb_ep *ep);
-static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep);
-static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr);
-
-static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req,
-		 int status);
-static void pio_irq_enable(int bEndpointAddress);
-static void pio_irq_disable(int bEndpointAddress);
-static void stop_activity(struct lh7a40x_udc *dev,
-			  struct usb_gadget_driver *driver);
-static void flush(struct lh7a40x_ep *ep);
-static void udc_enable(struct lh7a40x_udc *dev);
-static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address);
-
-static struct usb_ep_ops lh7a40x_ep_ops = {
-	.enable = lh7a40x_ep_enable,
-	.disable = lh7a40x_ep_disable,
-
-	.alloc_request = lh7a40x_alloc_request,
-	.free_request = lh7a40x_free_request,
-
-	.queue = lh7a40x_queue,
-	.dequeue = lh7a40x_dequeue,
-
-	.set_halt = lh7a40x_set_halt,
-	.fifo_status = lh7a40x_fifo_status,
-	.fifo_flush = lh7a40x_fifo_flush,
-};
-
-/* Inline code */
-
-static __inline__ int write_packet(struct lh7a40x_ep *ep,
-				   struct lh7a40x_request *req, int max)
-{
-	u8 *buf;
-	int length, count;
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-
-	buf = req->req.buf + req->req.actual;
-	prefetch(buf);
-
-	length = req->req.length - req->req.actual;
-	length = min(length, max);
-	req->req.actual += length;
-
-	DEBUG("Write %d (max %d), fifo %p\n", length, max, fifo);
-
-	count = length;
-	while (count--) {
-		*fifo = *buf++;
-	}
-
-	return length;
-}
-
-static __inline__ void usb_set_index(u32 ep)
-{
-	*(volatile u32 *)io_p2v(USB_INDEX) = ep;
-}
-
-static __inline__ u32 usb_read(u32 port)
-{
-	return *(volatile u32 *)io_p2v(port);
-}
-
-static __inline__ void usb_write(u32 val, u32 port)
-{
-	*(volatile u32 *)io_p2v(port) = val;
-}
-
-static __inline__ void usb_set(u32 val, u32 port)
-{
-	volatile u32 *ioport = (volatile u32 *)io_p2v(port);
-	u32 after = (*ioport) | val;
-	*ioport = after;
-}
-
-static __inline__ void usb_clear(u32 val, u32 port)
-{
-	volatile u32 *ioport = (volatile u32 *)io_p2v(port);
-	u32 after = (*ioport) & ~val;
-	*ioport = after;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#define GPIO_PORTC_DR 	(0x80000E08)
-#define GPIO_PORTC_DDR 	(0x80000E18)
-#define GPIO_PORTC_PDR 	(0x80000E70)
-
-/* get port C pin data register */
-#define get_portc_pdr(bit) 		((usb_read(GPIO_PORTC_PDR) & _BIT(bit)) != 0)
-/* get port C data direction register */
-#define get_portc_ddr(bit) 		((usb_read(GPIO_PORTC_DDR) & _BIT(bit)) != 0)
-/* set port C data register */
-#define set_portc_dr(bit, val) 	(val ? usb_set(_BIT(bit), GPIO_PORTC_DR) : usb_clear(_BIT(bit), GPIO_PORTC_DR))
-/* set port C data direction register */
-#define set_portc_ddr(bit, val) (val ? usb_set(_BIT(bit), GPIO_PORTC_DDR) : usb_clear(_BIT(bit), GPIO_PORTC_DDR))
-
-/*
- * LPD7A404 GPIO's:
- * Port C bit 1 = USB Port 1 Power Enable
- * Port C bit 2 = USB Port 1 Data Carrier Detect
- */
-#define is_usb_connected() 		get_portc_pdr(2)
-
-#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-
-static const char proc_node_name[] = "driver/udc";
-
-static int
-udc_proc_read(char *page, char **start, off_t off, int count,
-	      int *eof, void *_dev)
-{
-	char *buf = page;
-	struct lh7a40x_udc *dev = _dev;
-	char *next = buf;
-	unsigned size = count;
-	unsigned long flags;
-	int t;
-
-	if (off != 0)
-		return 0;
-
-	local_irq_save(flags);
-
-	/* basic device status */
-	t = scnprintf(next, size,
-		      DRIVER_DESC "\n"
-		      "%s version: %s\n"
-		      "Gadget driver: %s\n"
-		      "Host: %s\n\n",
-		      driver_name, DRIVER_VERSION,
-		      dev->driver ? dev->driver->driver.name : "(none)",
-		      is_usb_connected()? "full speed" : "disconnected");
-	size -= t;
-	next += t;
-
-	t = scnprintf(next, size,
-		      "GPIO:\n"
-		      " Port C bit 1: %d, dir %d\n"
-		      " Port C bit 2: %d, dir %d\n\n",
-		      get_portc_pdr(1), get_portc_ddr(1),
-		      get_portc_pdr(2), get_portc_ddr(2)
-	    );
-	size -= t;
-	next += t;
-
-	t = scnprintf(next, size,
-		      "DCP pullup: %d\n\n",
-		      (usb_read(USB_PM) & PM_USB_DCP) != 0);
-	size -= t;
-	next += t;
-
-	local_irq_restore(flags);
-	*eof = 1;
-	return count - size;
-}
-
-#define create_proc_files() 	create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
-#define remove_proc_files() 	remove_proc_entry(proc_node_name, NULL)
-
-#else	/* !CONFIG_USB_GADGET_DEBUG_FILES */
-
-#define create_proc_files() do {} while (0)
-#define remove_proc_files() do {} while (0)
-
-#endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
-
-/*
- * 	udc_disable - disable USB device controller
- */
-static void udc_disable(struct lh7a40x_udc *dev)
-{
-	DEBUG("%s, %p\n", __func__, dev);
-
-	udc_set_address(dev, 0);
-
-	/* Disable interrupts */
-	usb_write(0, USB_IN_INT_EN);
-	usb_write(0, USB_OUT_INT_EN);
-	usb_write(0, USB_INT_EN);
-
-	/* Disable the USB */
-	usb_write(0, USB_PM);
-
-#ifdef CONFIG_ARCH_LH7A404
-	/* Disable USB power */
-	set_portc_dr(1, 0);
-#endif
-
-	/* if hardware supports it, disconnect from usb */
-	/* make_usb_disappear(); */
-
-	dev->ep0state = WAIT_FOR_SETUP;
-	dev->gadget.speed = USB_SPEED_UNKNOWN;
-	dev->usb_address = 0;
-}
-
-/*
- * 	udc_reinit - initialize software state
- */
-static void udc_reinit(struct lh7a40x_udc *dev)
-{
-	u32 i;
-
-	DEBUG("%s, %p\n", __func__, dev);
-
-	/* device/ep0 records init */
-	INIT_LIST_HEAD(&dev->gadget.ep_list);
-	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
-	dev->ep0state = WAIT_FOR_SETUP;
-
-	/* basic endpoint records init */
-	for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-		struct lh7a40x_ep *ep = &dev->ep[i];
-
-		if (i != 0)
-			list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
-
-		ep->desc = 0;
-		ep->stopped = 0;
-		INIT_LIST_HEAD(&ep->queue);
-		ep->pio_irqs = 0;
-	}
-
-	/* the rest was statically initialized, and is read-only */
-}
-
-#define BYTES2MAXP(x)	(x / 8)
-#define MAXP2BYTES(x)	(x * 8)
-
-/* until it's enabled, this UDC should be completely invisible
- * to any USB host.
- */
-static void udc_enable(struct lh7a40x_udc *dev)
-{
-	int ep;
-
-	DEBUG("%s, %p\n", __func__, dev);
-
-	dev->gadget.speed = USB_SPEED_UNKNOWN;
-
-#ifdef CONFIG_ARCH_LH7A404
-	/* Set Port C bit 1 & 2 as output */
-	set_portc_ddr(1, 1);
-	set_portc_ddr(2, 1);
-
-	/* Enable USB power */
-	set_portc_dr(1, 0);
-#endif
-
-	/*
-	 * C.f Chapter 18.1.3.1 Initializing the USB
-	 */
-
-	/* Disable the USB */
-	usb_clear(PM_USB_ENABLE, USB_PM);
-
-	/* Reset APB & I/O sides of the USB */
-	usb_set(USB_RESET_APB | USB_RESET_IO, USB_RESET);
-	mdelay(5);
-	usb_clear(USB_RESET_APB | USB_RESET_IO, USB_RESET);
-
-	/* Set MAXP values for each */
-	for (ep = 0; ep < UDC_MAX_ENDPOINTS; ep++) {
-		struct lh7a40x_ep *ep_reg = &dev->ep[ep];
-		u32 csr;
-
-		usb_set_index(ep);
-
-		switch (ep_reg->ep_type) {
-		case ep_bulk_in:
-		case ep_interrupt:
-			usb_clear(USB_IN_CSR2_USB_DMA_EN | USB_IN_CSR2_AUTO_SET,
-				  ep_reg->csr2);
-			/* Fall through */
-		case ep_control:
-			usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)),
-				  USB_IN_MAXP);
-			break;
-		case ep_bulk_out:
-			usb_clear(USB_OUT_CSR2_USB_DMA_EN |
-				  USB_OUT_CSR2_AUTO_CLR, ep_reg->csr2);
-			usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)),
-				  USB_OUT_MAXP);
-			break;
-		}
-
-		/* Read & Write CSR1, just in case */
-		csr = usb_read(ep_reg->csr1);
-		usb_write(csr, ep_reg->csr1);
-
-		flush(ep_reg);
-	}
-
-	/* Disable interrupts */
-	usb_write(0, USB_IN_INT_EN);
-	usb_write(0, USB_OUT_INT_EN);
-	usb_write(0, USB_INT_EN);
-
-	/* Enable interrupts */
-	usb_set(USB_IN_INT_EP0, USB_IN_INT_EN);
-	usb_set(USB_INT_RESET_INT | USB_INT_RESUME_INT, USB_INT_EN);
-	/* Dont enable rest of the interrupts */
-	/* usb_set(USB_IN_INT_EP3 | USB_IN_INT_EP1 | USB_IN_INT_EP0, USB_IN_INT_EN);
-	   usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN); */
-
-	/* Enable SUSPEND */
-	usb_set(PM_ENABLE_SUSPEND, USB_PM);
-
-	/* Enable the USB */
-	usb_set(PM_USB_ENABLE, USB_PM);
-
-#ifdef CONFIG_ARCH_LH7A404
-	/* NOTE: DOES NOT WORK! */
-	/* Let host detect UDC:
-	 * Software must write a 0 to the PMR:DCP_CTRL bit to turn this
-	 * transistor on and pull the USBDP pin HIGH.
-	 */
-	/* usb_clear(PM_USB_DCP, USB_PM);
-	   usb_set(PM_USB_DCP, USB_PM); */
-#endif
-}
-
-/*
-  Register entry point for the peripheral controller driver.
-*/
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
-{
-	struct lh7a40x_udc *dev = the_controller;
-	int retval;
-
-	DEBUG("%s: %s\n", __func__, driver->driver.name);
-
-	if (!driver
-			|| driver->speed != USB_SPEED_FULL
-			|| !bind
-			|| !driver->disconnect
-			|| !driver->setup)
-		return -EINVAL;
-	if (!dev)
-		return -ENODEV;
-	if (dev->driver)
-		return -EBUSY;
-
-	/* first hook up the driver ... */
-	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
-
-	device_add(&dev->gadget.dev);
-	retval = bind(&dev->gadget);
-	if (retval) {
-		printk(KERN_WARNING "%s: bind to driver %s --> error %d\n",
-		       dev->gadget.name, driver->driver.name, retval);
-		device_del(&dev->gadget.dev);
-
-		dev->driver = 0;
-		dev->gadget.dev.driver = 0;
-		return retval;
-	}
-
-	/* ... then enable host detection and ep0; and we're ready
-	 * for set_configuration as well as eventual disconnect.
-	 * NOTE:  this shouldn't power up until later.
-	 */
-	printk(KERN_WARNING "%s: registered gadget driver '%s'\n",
-	       dev->gadget.name, driver->driver.name);
-
-	udc_enable(dev);
-
-	return 0;
-}
-EXPORT_SYMBOL(usb_gadget_probe_driver);
-
-/*
-  Unregister entry point for the peripheral controller driver.
-*/
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-{
-	struct lh7a40x_udc *dev = the_controller;
-	unsigned long flags;
-
-	if (!dev)
-		return -ENODEV;
-	if (!driver || driver != dev->driver || !driver->unbind)
-		return -EINVAL;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	dev->driver = 0;
-	stop_activity(dev, driver);
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	driver->unbind(&dev->gadget);
-	dev->gadget.dev.driver = NULL;
-	device_del(&dev->gadget.dev);
-
-	udc_disable(dev);
-
-	DEBUG("unregistered gadget driver '%s'\n", driver->driver.name);
-	return 0;
-}
-
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
-/*-------------------------------------------------------------------------*/
-
-/** Write request to FIFO (max write == maxp size)
- *  Return:  0 = still running, 1 = completed, negative = errno
- *  NOTE: INDEX register must be set for EP
- */
-static int write_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
-{
-	u32 max;
-	u32 csr;
-
-	max = le16_to_cpu(ep->desc->wMaxPacketSize);
-
-	csr = usb_read(ep->csr1);
-	DEBUG("CSR: %x %d\n", csr, csr & USB_IN_CSR1_FIFO_NOT_EMPTY);
-
-	if (!(csr & USB_IN_CSR1_FIFO_NOT_EMPTY)) {
-		unsigned count;
-		int is_last, is_short;
-
-		count = write_packet(ep, req, max);
-		usb_set(USB_IN_CSR1_IN_PKT_RDY, ep->csr1);
-
-		/* last packet is usually short (or a zlp) */
-		if (unlikely(count != max))
-			is_last = is_short = 1;
-		else {
-			if (likely(req->req.length != req->req.actual)
-			    || req->req.zero)
-				is_last = 0;
-			else
-				is_last = 1;
-			/* interrupt/iso maxpacket may not fill the fifo */
-			is_short = unlikely(max < ep_maxpacket(ep));
-		}
-
-		DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __func__,
-		      ep->ep.name, count,
-		      is_last ? "/L" : "", is_short ? "/S" : "",
-		      req->req.length - req->req.actual, req);
-
-		/* requests complete when all IN data is in the FIFO */
-		if (is_last) {
-			done(ep, req, 0);
-			if (list_empty(&ep->queue)) {
-				pio_irq_disable(ep_index(ep));
-			}
-			return 1;
-		}
-	} else {
-		DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep));
-	}
-
-	return 0;
-}
-
-/** Read to request from FIFO (max read == bytes in fifo)
- *  Return:  0 = still running, 1 = completed, negative = errno
- *  NOTE: INDEX register must be set for EP
- */
-static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
-{
-	u32 csr;
-	u8 *buf;
-	unsigned bufferspace, count, is_short;
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-
-	/* make sure there's a packet in the FIFO. */
-	csr = usb_read(ep->csr1);
-	if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) {
-		DEBUG("%s: Packet NOT ready!\n", __func__);
-		return -EINVAL;
-	}
-
-	buf = req->req.buf + req->req.actual;
-	prefetchw(buf);
-	bufferspace = req->req.length - req->req.actual;
-
-	/* read all bytes from this packet */
-	count = usb_read(USB_OUT_FIFO_WC1);
-	req->req.actual += min(count, bufferspace);
-
-	is_short = (count < ep->ep.maxpacket);
-	DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n",
-	      ep->ep.name, csr, count,
-	      is_short ? "/S" : "", req, req->req.actual, req->req.length);
-
-	while (likely(count-- != 0)) {
-		u8 byte = (u8) (*fifo & 0xff);
-
-		if (unlikely(bufferspace == 0)) {
-			/* this happens when the driver's buffer
-			 * is smaller than what the host sent.
-			 * discard the extra data.
-			 */
-			if (req->req.status != -EOVERFLOW)
-				printk(KERN_WARNING "%s overflow %d\n",
-				       ep->ep.name, count);
-			req->req.status = -EOVERFLOW;
-		} else {
-			*buf++ = byte;
-			bufferspace--;
-		}
-	}
-
-	usb_clear(USB_OUT_CSR1_OUT_PKT_RDY, ep->csr1);
-
-	/* completion */
-	if (is_short || req->req.actual == req->req.length) {
-		done(ep, req, 0);
-		usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1);
-
-		if (list_empty(&ep->queue))
-			pio_irq_disable(ep_index(ep));
-		return 1;
-	}
-
-	/* finished that packet.  the next one may be waiting... */
-	return 0;
-}
-
-/*
- *	done - retire a request; caller blocked irqs
- *  INDEX register is preserved to keep same
- */
-static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int status)
-{
-	unsigned int stopped = ep->stopped;
-	u32 index;
-
-	DEBUG("%s, %p\n", __func__, ep);
-	list_del_init(&req->queue);
-
-	if (likely(req->req.status == -EINPROGRESS))
-		req->req.status = status;
-	else
-		status = req->req.status;
-
-	if (status && status != -ESHUTDOWN)
-		DEBUG("complete %s req %p stat %d len %u/%u\n",
-		      ep->ep.name, &req->req, status,
-		      req->req.actual, req->req.length);
-
-	/* don't modify queue heads during completion callback */
-	ep->stopped = 1;
-	/* Read current index (completion may modify it) */
-	index = usb_read(USB_INDEX);
-
-	spin_unlock(&ep->dev->lock);
-	req->req.complete(&ep->ep, &req->req);
-	spin_lock(&ep->dev->lock);
-
-	/* Restore index */
-	usb_set_index(index);
-	ep->stopped = stopped;
-}
-
-/** Enable EP interrupt */
-static void pio_irq_enable(int ep)
-{
-	DEBUG("%s: %d\n", __func__, ep);
-
-	switch (ep) {
-	case 1:
-		usb_set(USB_IN_INT_EP1, USB_IN_INT_EN);
-		break;
-	case 2:
-		usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN);
-		break;
-	case 3:
-		usb_set(USB_IN_INT_EP3, USB_IN_INT_EN);
-		break;
-	default:
-		DEBUG("Unknown endpoint: %d\n", ep);
-		break;
-	}
-}
-
-/** Disable EP interrupt */
-static void pio_irq_disable(int ep)
-{
-	DEBUG("%s: %d\n", __func__, ep);
-
-	switch (ep) {
-	case 1:
-		usb_clear(USB_IN_INT_EP1, USB_IN_INT_EN);
-		break;
-	case 2:
-		usb_clear(USB_OUT_INT_EP2, USB_OUT_INT_EN);
-		break;
-	case 3:
-		usb_clear(USB_IN_INT_EP3, USB_IN_INT_EN);
-		break;
-	default:
-		DEBUG("Unknown endpoint: %d\n", ep);
-		break;
-	}
-}
-
-/*
- * 	nuke - dequeue ALL requests
- */
-void nuke(struct lh7a40x_ep *ep, int status)
-{
-	struct lh7a40x_request *req;
-
-	DEBUG("%s, %p\n", __func__, ep);
-
-	/* Flush FIFO */
-	flush(ep);
-
-	/* called with irqs blocked */
-	while (!list_empty(&ep->queue)) {
-		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
-		done(ep, req, status);
-	}
-
-	/* Disable IRQ if EP is enabled (has descriptor) */
-	if (ep->desc)
-		pio_irq_disable(ep_index(ep));
-}
-
-/*
-void nuke_all(struct lh7a40x_udc *dev)
-{
-	int n;
-	for(n=0; n<UDC_MAX_ENDPOINTS; n++) {
-		struct lh7a40x_ep *ep = &dev->ep[n];
-		usb_set_index(n);
-		nuke(ep, 0);
-	}
-}*/
-
-/*
-static void flush_all(struct lh7a40x_udc *dev)
-{
-	int n;
-    for (n = 0; n < UDC_MAX_ENDPOINTS; n++)
-    {
-		struct lh7a40x_ep *ep = &dev->ep[n];
-		flush(ep);
-    }
-}
-*/
-
-/** Flush EP
- * NOTE: INDEX register must be set before this call
- */
-static void flush(struct lh7a40x_ep *ep)
-{
-	DEBUG("%s, %p\n", __func__, ep);
-
-	switch (ep->ep_type) {
-	case ep_control:
-		/* check, by implication c.f. 15.1.2.11 */
-		break;
-
-	case ep_bulk_in:
-	case ep_interrupt:
-		/* if(csr & USB_IN_CSR1_IN_PKT_RDY) */
-		usb_set(USB_IN_CSR1_FIFO_FLUSH, ep->csr1);
-		break;
-
-	case ep_bulk_out:
-		/* if(csr & USB_OUT_CSR1_OUT_PKT_RDY) */
-		usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1);
-		break;
-	}
-}
-
-/**
- * lh7a40x_in_epn - handle IN interrupt
- */
-static void lh7a40x_in_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
-{
-	u32 csr;
-	struct lh7a40x_ep *ep = &dev->ep[ep_idx];
-	struct lh7a40x_request *req;
-
-	usb_set_index(ep_idx);
-
-	csr = usb_read(ep->csr1);
-	DEBUG("%s: %d, csr %x\n", __func__, ep_idx, csr);
-
-	if (csr & USB_IN_CSR1_SENT_STALL) {
-		DEBUG("USB_IN_CSR1_SENT_STALL\n");
-		usb_set(USB_IN_CSR1_SENT_STALL /*|USB_IN_CSR1_SEND_STALL */ ,
-			ep->csr1);
-		return;
-	}
-
-	if (!ep->desc) {
-		DEBUG("%s: NO EP DESC\n", __func__);
-		return;
-	}
-
-	if (list_empty(&ep->queue))
-		req = 0;
-	else
-		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
-
-	DEBUG("req: %p\n", req);
-
-	if (!req)
-		return;
-
-	write_fifo(ep, req);
-}
-
-/* ********************************************************************************************* */
-/* Bulk OUT (recv)
- */
-
-static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
-{
-	struct lh7a40x_ep *ep = &dev->ep[ep_idx];
-	struct lh7a40x_request *req;
-
-	DEBUG("%s: %d\n", __func__, ep_idx);
-
-	usb_set_index(ep_idx);
-
-	if (ep->desc) {
-		u32 csr;
-		csr = usb_read(ep->csr1);
-
-		while ((csr =
-			usb_read(ep->
-				 csr1)) & (USB_OUT_CSR1_OUT_PKT_RDY |
-					   USB_OUT_CSR1_SENT_STALL)) {
-			DEBUG("%s: %x\n", __func__, csr);
-
-			if (csr & USB_OUT_CSR1_SENT_STALL) {
-				DEBUG("%s: stall sent, flush fifo\n",
-				      __func__);
-				/* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
-				flush(ep);
-			} else if (csr & USB_OUT_CSR1_OUT_PKT_RDY) {
-				if (list_empty(&ep->queue))
-					req = 0;
-				else
-					req =
-					    list_entry(ep->queue.next,
-						       struct lh7a40x_request,
-						       queue);
-
-				if (!req) {
-					printk(KERN_WARNING
-					       "%s: NULL REQ %d\n",
-					       __func__, ep_idx);
-					flush(ep);
-					break;
-				} else {
-					read_fifo(ep, req);
-				}
-			}
-
-		}
-
-	} else {
-		/* Throw packet away.. */
-		printk(KERN_WARNING "%s: No descriptor?!?\n", __func__);
-		flush(ep);
-	}
-}
-
-static void stop_activity(struct lh7a40x_udc *dev,
-			  struct usb_gadget_driver *driver)
-{
-	int i;
-
-	/* don't disconnect drivers more than once */
-	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
-		driver = 0;
-	dev->gadget.speed = USB_SPEED_UNKNOWN;
-
-	/* prevent new request submissions, kill any outstanding requests  */
-	for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-		struct lh7a40x_ep *ep = &dev->ep[i];
-		ep->stopped = 1;
-
-		usb_set_index(i);
-		nuke(ep, -ESHUTDOWN);
-	}
-
-	/* report disconnect; the driver is already quiesced */
-	if (driver) {
-		spin_unlock(&dev->lock);
-		driver->disconnect(&dev->gadget);
-		spin_lock(&dev->lock);
-	}
-
-	/* re-init driver-visible data structures */
-	udc_reinit(dev);
-}
-
-/** Handle USB RESET interrupt
- */
-static void lh7a40x_reset_intr(struct lh7a40x_udc *dev)
-{
-#if 0				/* def CONFIG_ARCH_LH7A404 */
-	/* Does not work always... */
-
-	DEBUG("%s: %d\n", __func__, dev->usb_address);
-
-	if (!dev->usb_address) {
-		/*usb_set(USB_RESET_IO, USB_RESET);
-		   mdelay(5);
-		   usb_clear(USB_RESET_IO, USB_RESET); */
-		return;
-	}
-	/* Put the USB controller into reset. */
-	usb_set(USB_RESET_IO, USB_RESET);
-
-	/* Set Device ID to 0 */
-	udc_set_address(dev, 0);
-
-	/* Let PLL2 settle down */
-	mdelay(5);
-
-	/* Release the USB controller from reset */
-	usb_clear(USB_RESET_IO, USB_RESET);
-
-	/* Re-enable UDC */
-	udc_enable(dev);
-
-#endif
-	dev->gadget.speed = USB_SPEED_FULL;
-}
-
-/*
- *	lh7a40x usb client interrupt handler.
- */
-static irqreturn_t lh7a40x_udc_irq(int irq, void *_dev)
-{
-	struct lh7a40x_udc *dev = _dev;
-
-	DEBUG("\n\n");
-
-	spin_lock(&dev->lock);
-
-	for (;;) {
-		u32 intr_in = usb_read(USB_IN_INT);
-		u32 intr_out = usb_read(USB_OUT_INT);
-		u32 intr_int = usb_read(USB_INT);
-
-		/* Test also against enable bits.. (lh7a40x errata).. Sigh.. */
-		u32 in_en = usb_read(USB_IN_INT_EN);
-		u32 out_en = usb_read(USB_OUT_INT_EN);
-
-		if (!intr_out && !intr_in && !intr_int)
-			break;
-
-		DEBUG("%s (on state %s)\n", __func__,
-		      state_names[dev->ep0state]);
-		DEBUG("intr_out = %x\n", intr_out);
-		DEBUG("intr_in  = %x\n", intr_in);
-		DEBUG("intr_int = %x\n", intr_int);
-
-		if (intr_in) {
-			usb_write(intr_in, USB_IN_INT);
-
-			if ((intr_in & USB_IN_INT_EP1)
-			    && (in_en & USB_IN_INT_EP1)) {
-				DEBUG("USB_IN_INT_EP1\n");
-				lh7a40x_in_epn(dev, 1, intr_in);
-			}
-			if ((intr_in & USB_IN_INT_EP3)
-			    && (in_en & USB_IN_INT_EP3)) {
-				DEBUG("USB_IN_INT_EP3\n");
-				lh7a40x_in_epn(dev, 3, intr_in);
-			}
-			if (intr_in & USB_IN_INT_EP0) {
-				DEBUG("USB_IN_INT_EP0 (control)\n");
-				lh7a40x_handle_ep0(dev, intr_in);
-			}
-		}
-
-		if (intr_out) {
-			usb_write(intr_out, USB_OUT_INT);
-
-			if ((intr_out & USB_OUT_INT_EP2)
-			    && (out_en & USB_OUT_INT_EP2)) {
-				DEBUG("USB_OUT_INT_EP2\n");
-				lh7a40x_out_epn(dev, 2, intr_out);
-			}
-		}
-
-		if (intr_int) {
-			usb_write(intr_int, USB_INT);
-
-			if (intr_int & USB_INT_RESET_INT) {
-				lh7a40x_reset_intr(dev);
-			}
-
-			if (intr_int & USB_INT_RESUME_INT) {
-				DEBUG("USB resume\n");
-
-				if (dev->gadget.speed != USB_SPEED_UNKNOWN
-				    && dev->driver
-				    && dev->driver->resume
-				    && is_usb_connected()) {
-					dev->driver->resume(&dev->gadget);
-				}
-			}
-
-			if (intr_int & USB_INT_SUSPEND_INT) {
-				DEBUG("USB suspend%s\n",
-				      is_usb_connected()? "" : "+disconnect");
-				if (!is_usb_connected()) {
-					stop_activity(dev, dev->driver);
-				} else if (dev->gadget.speed !=
-					   USB_SPEED_UNKNOWN && dev->driver
-					   && dev->driver->suspend) {
-					dev->driver->suspend(&dev->gadget);
-				}
-			}
-
-		}
-	}
-
-	spin_unlock(&dev->lock);
-
-	return IRQ_HANDLED;
-}
-
-static int lh7a40x_ep_enable(struct usb_ep *_ep,
-			     const struct usb_endpoint_descriptor *desc)
-{
-	struct lh7a40x_ep *ep;
-	struct lh7a40x_udc *dev;
-	unsigned long flags;
-
-	DEBUG("%s, %p\n", __func__, _ep);
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (!_ep || !desc || ep->desc || _ep->name == ep0name
-	    || desc->bDescriptorType != USB_DT_ENDPOINT
-	    || ep->bEndpointAddress != desc->bEndpointAddress
-	    || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) {
-		DEBUG("%s, bad ep or descriptor\n", __func__);
-		return -EINVAL;
-	}
-
-	/* xfer types must match, except that interrupt ~= bulk */
-	if (ep->bmAttributes != desc->bmAttributes
-	    && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
-	    && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
-		DEBUG("%s, %s type mismatch\n", __func__, _ep->name);
-		return -EINVAL;
-	}
-
-	/* hardware _could_ do smaller, but driver doesn't */
-	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-	     && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep))
-	    || !desc->wMaxPacketSize) {
-		DEBUG("%s, bad %s maxpacket\n", __func__, _ep->name);
-		return -ERANGE;
-	}
-
-	dev = ep->dev;
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
-		DEBUG("%s, bogus device state\n", __func__);
-		return -ESHUTDOWN;
-	}
-
-	spin_lock_irqsave(&ep->dev->lock, flags);
-
-	ep->stopped = 0;
-	ep->desc = desc;
-	ep->pio_irqs = 0;
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
-
-	spin_unlock_irqrestore(&ep->dev->lock, flags);
-
-	/* Reset halt state (does flush) */
-	lh7a40x_set_halt(_ep, 0);
-
-	DEBUG("%s: enabled %s\n", __func__, _ep->name);
-	return 0;
-}
-
-/** Disable EP
- *  NOTE: Sets INDEX register
- */
-static int lh7a40x_ep_disable(struct usb_ep *_ep)
-{
-	struct lh7a40x_ep *ep;
-	unsigned long flags;
-
-	DEBUG("%s, %p\n", __func__, _ep);
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (!_ep || !ep->desc) {
-		DEBUG("%s, %s not enabled\n", __func__,
-		      _ep ? ep->ep.name : NULL);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&ep->dev->lock, flags);
-
-	usb_set_index(ep_index(ep));
-
-	/* Nuke all pending requests (does flush) */
-	nuke(ep, -ESHUTDOWN);
-
-	/* Disable ep IRQ */
-	pio_irq_disable(ep_index(ep));
-
-	ep->desc = 0;
-	ep->stopped = 1;
-
-	spin_unlock_irqrestore(&ep->dev->lock, flags);
-
-	DEBUG("%s: disabled %s\n", __func__, _ep->name);
-	return 0;
-}
-
-static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep,
-						 gfp_t gfp_flags)
-{
-	struct lh7a40x_request *req;
-
-	DEBUG("%s, %p\n", __func__, ep);
-
-	req = kzalloc(sizeof(*req), gfp_flags);
-	if (!req)
-		return 0;
-
-	INIT_LIST_HEAD(&req->queue);
-
-	return &req->req;
-}
-
-static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req)
-{
-	struct lh7a40x_request *req;
-
-	DEBUG("%s, %p\n", __func__, ep);
-
-	req = container_of(_req, struct lh7a40x_request, req);
-	WARN_ON(!list_empty(&req->queue));
-	kfree(req);
-}
-
-/** Queue one request
- *  Kickstart transfer if needed
- *  NOTE: Sets INDEX register
- */
-static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req,
-			 gfp_t gfp_flags)
-{
-	struct lh7a40x_request *req;
-	struct lh7a40x_ep *ep;
-	struct lh7a40x_udc *dev;
-	unsigned long flags;
-
-	DEBUG("\n\n\n%s, %p\n", __func__, _ep);
-
-	req = container_of(_req, struct lh7a40x_request, req);
-	if (unlikely
-	    (!_req || !_req->complete || !_req->buf
-	     || !list_empty(&req->queue))) {
-		DEBUG("%s, bad params\n", __func__);
-		return -EINVAL;
-	}
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
-		DEBUG("%s, bad ep\n", __func__);
-		return -EINVAL;
-	}
-
-	dev = ep->dev;
-	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
-		DEBUG("%s, bogus device state %p\n", __func__, dev->driver);
-		return -ESHUTDOWN;
-	}
-
-	DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length,
-	      _req->buf);
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	_req->status = -EINPROGRESS;
-	_req->actual = 0;
-
-	/* kickstart this i/o queue? */
-	DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue),
-	      ep->stopped);
-	if (list_empty(&ep->queue) && likely(!ep->stopped)) {
-		u32 csr;
-
-		if (unlikely(ep_index(ep) == 0)) {
-			/* EP0 */
-			list_add_tail(&req->queue, &ep->queue);
-			lh7a40x_ep0_kick(dev, ep);
-			req = 0;
-		} else if (ep_is_in(ep)) {
-			/* EP1 & EP3 */
-			usb_set_index(ep_index(ep));
-			csr = usb_read(ep->csr1);
-			pio_irq_enable(ep_index(ep));
-			if ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY) == 0) {
-				if (write_fifo(ep, req) == 1)
-					req = 0;
-			}
-		} else {
-			/* EP2 */
-			usb_set_index(ep_index(ep));
-			csr = usb_read(ep->csr1);
-			pio_irq_enable(ep_index(ep));
-			if (!(csr & USB_OUT_CSR1_FIFO_FULL)) {
-				if (read_fifo(ep, req) == 1)
-					req = 0;
-			}
-		}
-	}
-
-	/* pio or dma irq handler advances the queue. */
-	if (likely(req != 0))
-		list_add_tail(&req->queue, &ep->queue);
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return 0;
-}
-
-/* dequeue JUST ONE request */
-static int lh7a40x_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-{
-	struct lh7a40x_ep *ep;
-	struct lh7a40x_request *req;
-	unsigned long flags;
-
-	DEBUG("%s, %p\n", __func__, _ep);
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (!_ep || ep->ep.name == ep0name)
-		return -EINVAL;
-
-	spin_lock_irqsave(&ep->dev->lock, flags);
-
-	/* make sure it's actually queued on this endpoint */
-	list_for_each_entry(req, &ep->queue, queue) {
-		if (&req->req == _req)
-			break;
-	}
-	if (&req->req != _req) {
-		spin_unlock_irqrestore(&ep->dev->lock, flags);
-		return -EINVAL;
-	}
-
-	done(ep, req, -ECONNRESET);
-
-	spin_unlock_irqrestore(&ep->dev->lock, flags);
-	return 0;
-}
-
-/** Halt specific EP
- *  Return 0 if success
- *  NOTE: Sets INDEX register to EP !
- */
-static int lh7a40x_set_halt(struct usb_ep *_ep, int value)
-{
-	struct lh7a40x_ep *ep;
-	unsigned long flags;
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
-		DEBUG("%s, bad ep\n", __func__);
-		return -EINVAL;
-	}
-
-	usb_set_index(ep_index(ep));
-
-	DEBUG("%s, ep %d, val %d\n", __func__, ep_index(ep), value);
-
-	spin_lock_irqsave(&ep->dev->lock, flags);
-
-	if (ep_index(ep) == 0) {
-		/* EP0 */
-		usb_set(EP0_SEND_STALL, ep->csr1);
-	} else if (ep_is_in(ep)) {
-		u32 csr = usb_read(ep->csr1);
-		if (value && ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY)
-			      || !list_empty(&ep->queue))) {
-			/*
-			 * Attempts to halt IN endpoints will fail (returning -EAGAIN)
-			 * if any transfer requests are still queued, or if the controller
-			 * FIFO still holds bytes that the host hasn't collected.
-			 */
-			spin_unlock_irqrestore(&ep->dev->lock, flags);
-			DEBUG
-			    ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n",
-			     (csr & USB_IN_CSR1_FIFO_NOT_EMPTY),
-			     !list_empty(&ep->queue));
-			return -EAGAIN;
-		}
-		flush(ep);
-		if (value)
-			usb_set(USB_IN_CSR1_SEND_STALL, ep->csr1);
-		else {
-			usb_clear(USB_IN_CSR1_SEND_STALL, ep->csr1);
-			usb_set(USB_IN_CSR1_CLR_DATA_TOGGLE, ep->csr1);
-		}
-
-	} else {
-
-		flush(ep);
-		if (value)
-			usb_set(USB_OUT_CSR1_SEND_STALL, ep->csr1);
-		else {
-			usb_clear(USB_OUT_CSR1_SEND_STALL, ep->csr1);
-			usb_set(USB_OUT_CSR1_CLR_DATA_REG, ep->csr1);
-		}
-	}
-
-	if (value) {
-		ep->stopped = 1;
-	} else {
-		ep->stopped = 0;
-	}
-
-	spin_unlock_irqrestore(&ep->dev->lock, flags);
-
-	DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS");
-
-	return 0;
-}
-
-/** Return bytes in EP FIFO
- *  NOTE: Sets INDEX register to EP
- */
-static int lh7a40x_fifo_status(struct usb_ep *_ep)
-{
-	u32 csr;
-	int count = 0;
-	struct lh7a40x_ep *ep;
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (!_ep) {
-		DEBUG("%s, bad ep\n", __func__);
-		return -ENODEV;
-	}
-
-	DEBUG("%s, %d\n", __func__, ep_index(ep));
-
-	/* LPD can't report unclaimed bytes from IN fifos */
-	if (ep_is_in(ep))
-		return -EOPNOTSUPP;
-
-	usb_set_index(ep_index(ep));
-
-	csr = usb_read(ep->csr1);
-	if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN ||
-	    csr & USB_OUT_CSR1_OUT_PKT_RDY) {
-		count = usb_read(USB_OUT_FIFO_WC1);
-	}
-
-	return count;
-}
-
-/** Flush EP FIFO
- *  NOTE: Sets INDEX register to EP
- */
-static void lh7a40x_fifo_flush(struct usb_ep *_ep)
-{
-	struct lh7a40x_ep *ep;
-
-	ep = container_of(_ep, struct lh7a40x_ep, ep);
-	if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
-		DEBUG("%s, bad ep\n", __func__);
-		return;
-	}
-
-	usb_set_index(ep_index(ep));
-	flush(ep);
-}
-
-/****************************************************************/
-/* End Point 0 related functions                                */
-/****************************************************************/
-
-/* return:  0 = still running, 1 = completed, negative = errno */
-static int write_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
-{
-	u32 max;
-	unsigned count;
-	int is_last;
-
-	max = ep_maxpacket(ep);
-
-	DEBUG_EP0("%s\n", __func__);
-
-	count = write_packet(ep, req, max);
-
-	/* last packet is usually short (or a zlp) */
-	if (unlikely(count != max))
-		is_last = 1;
-	else {
-		if (likely(req->req.length != req->req.actual) || req->req.zero)
-			is_last = 0;
-		else
-			is_last = 1;
-	}
-
-	DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __func__,
-		  ep->ep.name, count,
-		  is_last ? "/L" : "", req->req.length - req->req.actual, req);
-
-	/* requests complete when all IN data is in the FIFO */
-	if (is_last) {
-		done(ep, req, 0);
-		return 1;
-	}
-
-	return 0;
-}
-
-static __inline__ int lh7a40x_fifo_read(struct lh7a40x_ep *ep,
-					unsigned char *cp, int max)
-{
-	int bytes;
-	int count = usb_read(USB_OUT_FIFO_WC1);
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-
-	if (count > max)
-		count = max;
-	bytes = count;
-	while (count--)
-		*cp++ = *fifo & 0xFF;
-	return bytes;
-}
-
-static __inline__ void lh7a40x_fifo_write(struct lh7a40x_ep *ep,
-					  unsigned char *cp, int count)
-{
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-	DEBUG_EP0("fifo_write: %d %d\n", ep_index(ep), count);
-	while (count--)
-		*fifo = *cp++;
-}
-
-static int read_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
-{
-	u32 csr;
-	u8 *buf;
-	unsigned bufferspace, count, is_short;
-	volatile u32 *fifo = (volatile u32 *)ep->fifo;
-
-	DEBUG_EP0("%s\n", __func__);
-
-	csr = usb_read(USB_EP0_CSR);
-	if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY))
-		return 0;
-
-	buf = req->req.buf + req->req.actual;
-	prefetchw(buf);
-	bufferspace = req->req.length - req->req.actual;
-
-	/* read all bytes from this packet */
-	if (likely(csr & EP0_OUT_PKT_RDY)) {
-		count = usb_read(USB_OUT_FIFO_WC1);
-		req->req.actual += min(count, bufferspace);
-	} else			/* zlp */
-		count = 0;
-
-	is_short = (count < ep->ep.maxpacket);
-	DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n",
-		  ep->ep.name, csr, count,
-		  is_short ? "/S" : "", req, req->req.actual, req->req.length);
-
-	while (likely(count-- != 0)) {
-		u8 byte = (u8) (*fifo & 0xff);
-
-		if (unlikely(bufferspace == 0)) {
-			/* this happens when the driver's buffer
-			 * is smaller than what the host sent.
-			 * discard the extra data.
-			 */
-			if (req->req.status != -EOVERFLOW)
-				DEBUG_EP0("%s overflow %d\n", ep->ep.name,
-					  count);
-			req->req.status = -EOVERFLOW;
-		} else {
-			*buf++ = byte;
-			bufferspace--;
-		}
-	}
-
-	/* completion */
-	if (is_short || req->req.actual == req->req.length) {
-		done(ep, req, 0);
-		return 1;
-	}
-
-	/* finished that packet.  the next one may be waiting... */
-	return 0;
-}
-
-/**
- * udc_set_address - set the USB address for this device
- * @address:
- *
- * Called from control endpoint function after it decodes a set address setup packet.
- */
-static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address)
-{
-	DEBUG_EP0("%s: %d\n", __func__, address);
-	/* c.f. 15.1.2.2 Table 15-4 address will be used after DATA_END is set */
-	dev->usb_address = address;
-	usb_set((address & USB_FA_FUNCTION_ADDR), USB_FA);
-	usb_set(USB_FA_ADDR_UPDATE | (address & USB_FA_FUNCTION_ADDR), USB_FA);
-	/* usb_read(USB_FA); */
-}
-
-/*
- * DATA_STATE_RECV (OUT_PKT_RDY)
- *      - if error
- *              set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits
- *      - else
- *              set EP0_CLR_OUT bit
- 				if last set EP0_DATA_END bit
- */
-static void lh7a40x_ep0_out(struct lh7a40x_udc *dev, u32 csr)
-{
-	struct lh7a40x_request *req;
-	struct lh7a40x_ep *ep = &dev->ep[0];
-	int ret;
-
-	DEBUG_EP0("%s: %x\n", __func__, csr);
-
-	if (list_empty(&ep->queue))
-		req = 0;
-	else
-		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
-
-	if (req) {
-
-		if (req->req.length == 0) {
-			DEBUG_EP0("ZERO LENGTH OUT!\n");
-			usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
-			dev->ep0state = WAIT_FOR_SETUP;
-			return;
-		}
-		ret = read_fifo_ep0(ep, req);
-		if (ret) {
-			/* Done! */
-			DEBUG_EP0("%s: finished, waiting for status\n",
-				  __func__);
-
-			usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
-			dev->ep0state = WAIT_FOR_SETUP;
-		} else {
-			/* Not done yet.. */
-			DEBUG_EP0("%s: not finished\n", __func__);
-			usb_set(EP0_CLR_OUT, USB_EP0_CSR);
-		}
-	} else {
-		DEBUG_EP0("NO REQ??!\n");
-	}
-}
-
-/*
- * DATA_STATE_XMIT
- */
-static int lh7a40x_ep0_in(struct lh7a40x_udc *dev, u32 csr)
-{
-	struct lh7a40x_request *req;
-	struct lh7a40x_ep *ep = &dev->ep[0];
-	int ret, need_zlp = 0;
-
-	DEBUG_EP0("%s: %x\n", __func__, csr);
-
-	if (list_empty(&ep->queue))
-		req = 0;
-	else
-		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
-
-	if (!req) {
-		DEBUG_EP0("%s: NULL REQ\n", __func__);
-		return 0;
-	}
-
-	if (req->req.length == 0) {
-
-		usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
-		dev->ep0state = WAIT_FOR_SETUP;
-		return 1;
-	}
-
-	if (req->req.length - req->req.actual == EP0_PACKETSIZE) {
-		/* Next write will end with the packet size, */
-		/* so we need Zero-length-packet */
-		need_zlp = 1;
-	}
-
-	ret = write_fifo_ep0(ep, req);
-
-	if (ret == 1 && !need_zlp) {
-		/* Last packet */
-		DEBUG_EP0("%s: finished, waiting for status\n", __func__);
-
-		usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
-		dev->ep0state = WAIT_FOR_SETUP;
-	} else {
-		DEBUG_EP0("%s: not finished\n", __func__);
-		usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
-	}
-
-	if (need_zlp) {
-		DEBUG_EP0("%s: Need ZLP!\n", __func__);
-		usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
-		dev->ep0state = DATA_STATE_NEED_ZLP;
-	}
-
-	return 1;
-}
-
-static int lh7a40x_handle_get_status(struct lh7a40x_udc *dev,
-				     struct usb_ctrlrequest *ctrl)
-{
-	struct lh7a40x_ep *ep0 = &dev->ep[0];
-	struct lh7a40x_ep *qep;
-	int reqtype = (ctrl->bRequestType & USB_RECIP_MASK);
-	u16 val = 0;
-
-	if (reqtype == USB_RECIP_INTERFACE) {
-		/* This is not supported.
-		 * And according to the USB spec, this one does nothing..
-		 * Just return 0
-		 */
-		DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n");
-	} else if (reqtype == USB_RECIP_DEVICE) {
-		DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n");
-		val |= (1 << 0);	/* Self powered */
-		/*val |= (1<<1); *//* Remote wakeup */
-	} else if (reqtype == USB_RECIP_ENDPOINT) {
-		int ep_num = (ctrl->wIndex & ~USB_DIR_IN);
-
-		DEBUG_SETUP
-		    ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n",
-		     ep_num, ctrl->wLength);
-
-		if (ctrl->wLength > 2 || ep_num > 3)
-			return -EOPNOTSUPP;
-
-		qep = &dev->ep[ep_num];
-		if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0)
-		    && ep_index(qep) != 0) {
-			return -EOPNOTSUPP;
-		}
-
-		usb_set_index(ep_index(qep));
-
-		/* Return status on next IN token */
-		switch (qep->ep_type) {
-		case ep_control:
-			val =
-			    (usb_read(qep->csr1) & EP0_SEND_STALL) ==
-			    EP0_SEND_STALL;
-			break;
-		case ep_bulk_in:
-		case ep_interrupt:
-			val =
-			    (usb_read(qep->csr1) & USB_IN_CSR1_SEND_STALL) ==
-			    USB_IN_CSR1_SEND_STALL;
-			break;
-		case ep_bulk_out:
-			val =
-			    (usb_read(qep->csr1) & USB_OUT_CSR1_SEND_STALL) ==
-			    USB_OUT_CSR1_SEND_STALL;
-			break;
-		}
-
-		/* Back to EP0 index */
-		usb_set_index(0);
-
-		DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num,
-			    ctrl->wIndex, val);
-	} else {
-		DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype);
-		return -EOPNOTSUPP;
-	}
-
-	/* Clear "out packet ready" */
-	usb_set((EP0_CLR_OUT), USB_EP0_CSR);
-	/* Put status to FIFO */
-	lh7a40x_fifo_write(ep0, (u8 *) & val, sizeof(val));
-	/* Issue "In packet ready" */
-	usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
-
-	return 0;
-}
-
-/*
- * WAIT_FOR_SETUP (OUT_PKT_RDY)
- *      - read data packet from EP0 FIFO
- *      - decode command
- *      - if error
- *              set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits
- *      - else
- *              set EP0_CLR_OUT | EP0_DATA_END bits
- */
-static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr)
-{
-	struct lh7a40x_ep *ep = &dev->ep[0];
-	struct usb_ctrlrequest ctrl;
-	int i, bytes, is_in;
-
-	DEBUG_SETUP("%s: %x\n", __func__, csr);
-
-	/* Nuke all previous transfers */
-	nuke(ep, -EPROTO);
-
-	/* read control req from fifo (8 bytes) */
-	bytes = lh7a40x_fifo_read(ep, (unsigned char *)&ctrl, 8);
-
-	DEBUG_SETUP("Read CTRL REQ %d bytes\n", bytes);
-	DEBUG_SETUP("CTRL.bRequestType = %d (is_in %d)\n", ctrl.bRequestType,
-		    ctrl.bRequestType == USB_DIR_IN);
-	DEBUG_SETUP("CTRL.bRequest = %d\n", ctrl.bRequest);
-	DEBUG_SETUP("CTRL.wLength = %d\n", ctrl.wLength);
-	DEBUG_SETUP("CTRL.wValue = %d (%d)\n", ctrl.wValue, ctrl.wValue >> 8);
-	DEBUG_SETUP("CTRL.wIndex = %d\n", ctrl.wIndex);
-
-	/* Set direction of EP0 */
-	if (likely(ctrl.bRequestType & USB_DIR_IN)) {
-		ep->bEndpointAddress |= USB_DIR_IN;
-		is_in = 1;
-	} else {
-		ep->bEndpointAddress &= ~USB_DIR_IN;
-		is_in = 0;
-	}
-
-	dev->req_pending = 1;
-
-	/* Handle some SETUP packets ourselves */
-	switch (ctrl.bRequest) {
-	case USB_REQ_SET_ADDRESS:
-		if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-			break;
-
-		DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue);
-		udc_set_address(dev, ctrl.wValue);
-		usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
-		return;
-
-	case USB_REQ_GET_STATUS:{
-			if (lh7a40x_handle_get_status(dev, &ctrl) == 0)
-				return;
-
-	case USB_REQ_CLEAR_FEATURE:
-	case USB_REQ_SET_FEATURE:
-			if (ctrl.bRequestType == USB_RECIP_ENDPOINT) {
-				struct lh7a40x_ep *qep;
-				int ep_num = (ctrl.wIndex & 0x0f);
-
-				/* Support only HALT feature */
-				if (ctrl.wValue != 0 || ctrl.wLength != 0
-				    || ep_num > 3 || ep_num < 1)
-					break;
-
-				qep = &dev->ep[ep_num];
-				spin_unlock(&dev->lock);
-				if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
-					DEBUG_SETUP("SET_FEATURE (%d)\n",
-						    ep_num);
-					lh7a40x_set_halt(&qep->ep, 1);
-				} else {
-					DEBUG_SETUP("CLR_FEATURE (%d)\n",
-						    ep_num);
-					lh7a40x_set_halt(&qep->ep, 0);
-				}
-				spin_lock(&dev->lock);
-				usb_set_index(0);
-
-				/* Reply with a ZLP on next IN token */
-				usb_set((EP0_CLR_OUT | EP0_DATA_END),
-					USB_EP0_CSR);
-				return;
-			}
-			break;
-		}
-
-	default:
-		break;
-	}
-
-	if (likely(dev->driver)) {
-		/* device-2-host (IN) or no data setup command, process immediately */
-		spin_unlock(&dev->lock);
-		i = dev->driver->setup(&dev->gadget, &ctrl);
-		spin_lock(&dev->lock);
-
-		if (i < 0) {
-			/* setup processing failed, force stall */
-			DEBUG_SETUP
-			    ("  --> ERROR: gadget setup FAILED (stalling), setup returned %d\n",
-			     i);
-			usb_set_index(0);
-			usb_set((EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL),
-				USB_EP0_CSR);
-
-			/* ep->stopped = 1; */
-			dev->ep0state = WAIT_FOR_SETUP;
-		}
-	}
-}
-
-/*
- * DATA_STATE_NEED_ZLP
- */
-static void lh7a40x_ep0_in_zlp(struct lh7a40x_udc *dev, u32 csr)
-{
-	DEBUG_EP0("%s: %x\n", __func__, csr);
-
-	/* c.f. Table 15-14 */
-	usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
-	dev->ep0state = WAIT_FOR_SETUP;
-}
-
-/*
- * handle ep0 interrupt
- */
-static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr)
-{
-	struct lh7a40x_ep *ep = &dev->ep[0];
-	u32 csr;
-
-	/* Set index 0 */
-	usb_set_index(0);
- 	csr = usb_read(USB_EP0_CSR);
-
-	DEBUG_EP0("%s: csr = %x\n", __func__, csr);
-
-	/*
-	 * For overview of what we should be doing see c.f. Chapter 18.1.2.4
-	 * We will follow that outline here modified by our own global state
-	 * indication which provides hints as to what we think should be
-	 * happening..
-	 */
-
-	/*
-	 * if SENT_STALL is set
-	 *      - clear the SENT_STALL bit
-	 */
-	if (csr & EP0_SENT_STALL) {
-		DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __func__, csr);
-		usb_clear((EP0_SENT_STALL | EP0_SEND_STALL), USB_EP0_CSR);
-		nuke(ep, -ECONNABORTED);
-		dev->ep0state = WAIT_FOR_SETUP;
-		return;
-	}
-
-	/*
-	 * if a transfer is in progress && IN_PKT_RDY and OUT_PKT_RDY are clear
-	 *      - fill EP0 FIFO
-	 *      - if last packet
-	 *      -       set IN_PKT_RDY | DATA_END
-	 *      - else
-	 *              set IN_PKT_RDY
-	 */
-	if (!(csr & (EP0_IN_PKT_RDY | EP0_OUT_PKT_RDY))) {
-		DEBUG_EP0("%s: IN_PKT_RDY and OUT_PKT_RDY are clear\n",
-			  __func__);
-
-		switch (dev->ep0state) {
-		case DATA_STATE_XMIT:
-			DEBUG_EP0("continue with DATA_STATE_XMIT\n");
-			lh7a40x_ep0_in(dev, csr);
-			return;
-		case DATA_STATE_NEED_ZLP:
-			DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n");
-			lh7a40x_ep0_in_zlp(dev, csr);
-			return;
-		default:
-			/* Stall? */
-			DEBUG_EP0("Odd state!! state = %s\n",
-				  state_names[dev->ep0state]);
-			dev->ep0state = WAIT_FOR_SETUP;
-			/* nuke(ep, 0); */
-			/* usb_set(EP0_SEND_STALL, ep->csr1); */
-			break;
-		}
-	}
-
-	/*
-	 * if SETUP_END is set
-	 *      - abort the last transfer
-	 *      - set SERVICED_SETUP_END_BIT
-	 */
-	if (csr & EP0_SETUP_END) {
-		DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __func__, csr);
-
-		usb_set(EP0_CLR_SETUP_END, USB_EP0_CSR);
-
-		nuke(ep, 0);
-		dev->ep0state = WAIT_FOR_SETUP;
-	}
-
-	/*
-	 * if EP0_OUT_PKT_RDY is set
-	 *      - read data packet from EP0 FIFO
-	 *      - decode command
-	 *      - if error
-	 *              set SERVICED_OUT_PKT_RDY | DATA_END bits | SEND_STALL
-	 *      - else
-	 *              set SERVICED_OUT_PKT_RDY | DATA_END bits
-	 */
-	if (csr & EP0_OUT_PKT_RDY) {
-
-		DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __func__,
-			  csr);
-
-		switch (dev->ep0state) {
-		case WAIT_FOR_SETUP:
-			DEBUG_EP0("WAIT_FOR_SETUP\n");
-			lh7a40x_ep0_setup(dev, csr);
-			break;
-
-		case DATA_STATE_RECV:
-			DEBUG_EP0("DATA_STATE_RECV\n");
-			lh7a40x_ep0_out(dev, csr);
-			break;
-
-		default:
-			/* send stall? */
-			DEBUG_EP0("strange state!! 2. send stall? state = %d\n",
-				  dev->ep0state);
-			break;
-		}
-	}
-}
-
-static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep)
-{
-	u32 csr;
-
-	usb_set_index(0);
-	csr = usb_read(USB_EP0_CSR);
-
-	DEBUG_EP0("%s: %x\n", __func__, csr);
-
-	/* Clear "out packet ready" */
-	usb_set(EP0_CLR_OUT, USB_EP0_CSR);
-
-	if (ep_is_in(ep)) {
-		dev->ep0state = DATA_STATE_XMIT;
-		lh7a40x_ep0_in(dev, csr);
-	} else {
-		dev->ep0state = DATA_STATE_RECV;
-		lh7a40x_ep0_out(dev, csr);
-	}
-}
-
-/* ---------------------------------------------------------------------------
- * 	device-scoped parts of the api to the usb controller hardware
- * ---------------------------------------------------------------------------
- */
-
-static int lh7a40x_udc_get_frame(struct usb_gadget *_gadget)
-{
-	u32 frame1 = usb_read(USB_FRM_NUM1);	/* Least significant 8 bits */
-	u32 frame2 = usb_read(USB_FRM_NUM2);	/* Most significant 3 bits */
-	DEBUG("%s, %p\n", __func__, _gadget);
-	return ((frame2 & 0x07) << 8) | (frame1 & 0xff);
-}
-
-static int lh7a40x_udc_wakeup(struct usb_gadget *_gadget)
-{
-	/* host may not have enabled remote wakeup */
-	/*if ((UDCCS0 & UDCCS0_DRWF) == 0)
-	   return -EHOSTUNREACH;
-	   udc_set_mask_UDCCR(UDCCR_RSM); */
-	return -ENOTSUPP;
-}
-
-static const struct usb_gadget_ops lh7a40x_udc_ops = {
-	.get_frame = lh7a40x_udc_get_frame,
-	.wakeup = lh7a40x_udc_wakeup,
-	/* current versions must always be self-powered */
-};
-
-static void nop_release(struct device *dev)
-{
-	DEBUG("%s %s\n", __func__, dev_name(dev));
-}
-
-static struct lh7a40x_udc memory = {
-	.usb_address = 0,
-
-	.gadget = {
-		   .ops = &lh7a40x_udc_ops,
-		   .ep0 = &memory.ep[0].ep,
-		   .name = driver_name,
-		   .dev = {
-			   .init_name = "gadget",
-			   .release = nop_release,
-			   },
-		   },
-
-	/* control endpoint */
-	.ep[0] = {
-		  .ep = {
-			 .name = ep0name,
-			 .ops = &lh7a40x_ep_ops,
-			 .maxpacket = EP0_PACKETSIZE,
-			 },
-		  .dev = &memory,
-
-		  .bEndpointAddress = 0,
-		  .bmAttributes = 0,
-
-		  .ep_type = ep_control,
-		  .fifo = io_p2v(USB_EP0_FIFO),
-		  .csr1 = USB_EP0_CSR,
-		  .csr2 = USB_EP0_CSR,
-		  },
-
-	/* first group of endpoints */
-	.ep[1] = {
-		  .ep = {
-			 .name = "ep1in-bulk",
-			 .ops = &lh7a40x_ep_ops,
-			 .maxpacket = 64,
-			 },
-		  .dev = &memory,
-
-		  .bEndpointAddress = USB_DIR_IN | 1,
-		  .bmAttributes = USB_ENDPOINT_XFER_BULK,
-
-		  .ep_type = ep_bulk_in,
-		  .fifo = io_p2v(USB_EP1_FIFO),
-		  .csr1 = USB_IN_CSR1,
-		  .csr2 = USB_IN_CSR2,
-		  },
-
-	.ep[2] = {
-		  .ep = {
-			 .name = "ep2out-bulk",
-			 .ops = &lh7a40x_ep_ops,
-			 .maxpacket = 64,
-			 },
-		  .dev = &memory,
-
-		  .bEndpointAddress = 2,
-		  .bmAttributes = USB_ENDPOINT_XFER_BULK,
-
-		  .ep_type = ep_bulk_out,
-		  .fifo = io_p2v(USB_EP2_FIFO),
-		  .csr1 = USB_OUT_CSR1,
-		  .csr2 = USB_OUT_CSR2,
-		  },
-
-	.ep[3] = {
-		  .ep = {
-			 .name = "ep3in-int",
-			 .ops = &lh7a40x_ep_ops,
-			 .maxpacket = 64,
-			 },
-		  .dev = &memory,
-
-		  .bEndpointAddress = USB_DIR_IN | 3,
-		  .bmAttributes = USB_ENDPOINT_XFER_INT,
-
-		  .ep_type = ep_interrupt,
-		  .fifo = io_p2v(USB_EP3_FIFO),
-		  .csr1 = USB_IN_CSR1,
-		  .csr2 = USB_IN_CSR2,
-		  },
-};
-
-/*
- * 	probe - binds to the platform device
- */
-static int lh7a40x_udc_probe(struct platform_device *pdev)
-{
-	struct lh7a40x_udc *dev = &memory;
-	int retval;
-
-	DEBUG("%s: %p\n", __func__, pdev);
-
-	spin_lock_init(&dev->lock);
-	dev->dev = &pdev->dev;
-
-	device_initialize(&dev->gadget.dev);
-	dev->gadget.dev.parent = &pdev->dev;
-
-	the_controller = dev;
-	platform_set_drvdata(pdev, dev);
-
-	udc_disable(dev);
-	udc_reinit(dev);
-
-	/* irq setup after old hardware state is cleaned up */
-	retval =
-	    request_irq(IRQ_USBINTR, lh7a40x_udc_irq, IRQF_DISABLED, driver_name,
-			dev);
-	if (retval != 0) {
-		DEBUG(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name,
-		      IRQ_USBINTR, retval);
-		return -EBUSY;
-	}
-
-	create_proc_files();
-
-	return retval;
-}
-
-static int lh7a40x_udc_remove(struct platform_device *pdev)
-{
-	struct lh7a40x_udc *dev = platform_get_drvdata(pdev);
-
-	DEBUG("%s: %p\n", __func__, pdev);
-
-	if (dev->driver)
-		return -EBUSY;
-
-	udc_disable(dev);
-	remove_proc_files();
-
-	free_irq(IRQ_USBINTR, dev);
-
-	platform_set_drvdata(pdev, 0);
-
-	the_controller = 0;
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct platform_driver udc_driver = {
-	.probe = lh7a40x_udc_probe,
-	.remove = lh7a40x_udc_remove,
-	    /* FIXME power management support */
-	    /* .suspend = ... disable UDC */
-	    /* .resume = ... re-enable UDC */
-	.driver	= {
-		.name = (char *)driver_name,
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init udc_init(void)
-{
-	DEBUG("%s: %s version %s\n", __func__, driver_name, DRIVER_VERSION);
-	return platform_driver_register(&udc_driver);
-}
-
-static void __exit udc_exit(void)
-{
-	platform_driver_unregister(&udc_driver);
-}
-
-module_init(udc_init);
-module_exit(udc_exit);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:lh7a40x_udc");
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h
deleted file mode 100644
index ca861203a301..000000000000
--- a/drivers/usb/gadget/lh7a40x_udc.h
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * linux/drivers/usb/gadget/lh7a40x_udc.h
- * Sharp LH7A40x on-chip full speed USB device controllers
- *
- * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID
- * Copyright (C) 2004 Bo Henriksen, Nordic ID
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __LH7A40X_H_
-#define __LH7A40X_H_
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/byteorder.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
-#include <mach/hardware.h>
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-/*
- * Memory map
- */
-
-#define USB_FA					0x80000200	// function address register
-#define USB_PM					0x80000204	// power management register
-
-#define USB_IN_INT				0x80000208	// IN interrupt register bank (EP0-EP3)
-#define USB_OUT_INT				0x80000210	// OUT interrupt register bank (EP2)
-#define USB_INT					0x80000218	// interrupt register bank
-
-#define USB_IN_INT_EN			0x8000021C	// IN interrupt enable register bank
-#define USB_OUT_INT_EN			0x80000224	// OUT interrupt enable register bank
-#define USB_INT_EN				0x8000022C	// USB interrupt enable register bank
-
-#define USB_FRM_NUM1			0x80000230	// Frame number1 register
-#define USB_FRM_NUM2			0x80000234	// Frame number2 register
-#define USB_INDEX				0x80000238	// index register
-
-#define USB_IN_MAXP				0x80000240	// IN MAXP register
-#define USB_IN_CSR1				0x80000244	// IN CSR1 register/EP0 CSR register
-#define USB_EP0_CSR				0x80000244	// IN CSR1 register/EP0 CSR register
-#define USB_IN_CSR2				0x80000248	// IN CSR2 register
-#define USB_OUT_MAXP			0x8000024C	// OUT MAXP register
-
-#define USB_OUT_CSR1			0x80000250	// OUT CSR1 register
-#define USB_OUT_CSR2			0x80000254	// OUT CSR2 register
-#define USB_OUT_FIFO_WC1		0x80000258	// OUT FIFO write count1 register
-#define USB_OUT_FIFO_WC2		0x8000025C	// OUT FIFO write count2 register
-
-#define USB_RESET				0x8000044C	// USB reset register
-
-#define	USB_EP0_FIFO			0x80000280
-#define	USB_EP1_FIFO			0x80000284
-#define	USB_EP2_FIFO			0x80000288
-#define	USB_EP3_FIFO			0x8000028c
-
-/*
- * USB reset register
- */
-#define USB_RESET_APB			(1<<1)	//resets USB APB control side WRITE
-#define USB_RESET_IO			(1<<0)	//resets USB IO side WRITE
-
-/*
- * USB function address register
- */
-#define USB_FA_ADDR_UPDATE		(1<<7)
-#define USB_FA_FUNCTION_ADDR	(0x7F)
-
-/*
- * Power Management register
- */
-#define PM_USB_DCP				(1<<5)
-#define PM_USB_ENABLE			(1<<4)
-#define PM_USB_RESET			(1<<3)
-#define PM_UC_RESUME			(1<<2)
-#define PM_SUSPEND_MODE			(1<<1)
-#define PM_ENABLE_SUSPEND		(1<<0)
-
-/*
- * IN interrupt register
- */
-#define USB_IN_INT_EP3				(1<<3)
-#define USB_IN_INT_EP1				(1<<1)
-#define USB_IN_INT_EP0				(1<<0)
-
-/*
- * OUT interrupt register
- */
-#define USB_OUT_INT_EP2				(1<<2)
-
-/*
- * USB interrupt register
- */
-#define USB_INT_RESET_INT			(1<<2)
-#define USB_INT_RESUME_INT			(1<<1)
-#define USB_INT_SUSPEND_INT			(1<<0)
-
-/*
- * USB interrupt enable register
- */
-#define USB_INT_EN_USB_RESET_INTER		(1<<2)
-#define USB_INT_EN_RESUME_INTER			(1<<1)
-#define USB_INT_EN_SUSPEND_INTER		(1<<0)
-
-/*
- * INCSR1 register
- */
-#define USB_IN_CSR1_CLR_DATA_TOGGLE		(1<<6)
-#define USB_IN_CSR1_SENT_STALL			(1<<5)
-#define USB_IN_CSR1_SEND_STALL			(1<<4)
-#define USB_IN_CSR1_FIFO_FLUSH			(1<<3)
-#define USB_IN_CSR1_FIFO_NOT_EMPTY		(1<<1)
-#define USB_IN_CSR1_IN_PKT_RDY			(1<<0)
-
-/*
- * INCSR2 register
- */
-#define USB_IN_CSR2_AUTO_SET			(1<<7)
-#define USB_IN_CSR2_USB_DMA_EN			(1<<4)
-
-/*
- * OUT CSR1 register
- */
-#define USB_OUT_CSR1_CLR_DATA_REG		(1<<7)
-#define USB_OUT_CSR1_SENT_STALL			(1<<6)
-#define USB_OUT_CSR1_SEND_STALL			(1<<5)
-#define USB_OUT_CSR1_FIFO_FLUSH			(1<<4)
-#define USB_OUT_CSR1_FIFO_FULL			(1<<1)
-#define USB_OUT_CSR1_OUT_PKT_RDY		(1<<0)
-
-/*
- * OUT CSR2 register
- */
-#define USB_OUT_CSR2_AUTO_CLR			(1<<7)
-#define USB_OUT_CSR2_USB_DMA_EN			(1<<4)
-
-/*
- * EP0 CSR
- */
-#define EP0_CLR_SETUP_END		(1<<7)	/* Clear "Setup Ends" Bit (w) */
-#define EP0_CLR_OUT				(1<<6)	/* Clear "Out packet ready" Bit (w) */
-#define EP0_SEND_STALL			(1<<5)	/* Send STALL Handshake (rw) */
-#define EP0_SETUP_END			(1<<4)	/* Setup Ends (r) */
-
-#define EP0_DATA_END			(1<<3)	/* Data end (rw) */
-#define EP0_SENT_STALL			(1<<2)	/* Sent Stall Handshake (r) */
-#define EP0_IN_PKT_RDY			(1<<1)	/* In packet ready (rw) */
-#define EP0_OUT_PKT_RDY			(1<<0)	/* Out packet ready (r) */
-
-/* general CSR */
-#define OUT_PKT_RDY		(1<<0)
-#define IN_PKT_RDY		(1<<0)
-
-/*
- * IN/OUT MAXP register
- */
-#define USB_OUT_MAXP_MAXP			(0xF)
-#define USB_IN_MAXP_MAXP			(0xF)
-
-// Max packet size
-//#define EP0_PACKETSIZE        0x10
-#define EP0_PACKETSIZE  	0x8
-#define EP0_MAXPACKETSIZE  	0x10
-
-#define UDC_MAX_ENDPOINTS       4
-
-#define WAIT_FOR_SETUP          0
-#define DATA_STATE_XMIT         1
-#define DATA_STATE_NEED_ZLP     2
-#define WAIT_FOR_OUT_STATUS     3
-#define DATA_STATE_RECV         4
-
-/* ********************************************************************************************* */
-/* IO
- */
-
-typedef enum ep_type {
-	ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
-} ep_type_t;
-
-struct lh7a40x_ep {
-	struct usb_ep ep;
-	struct lh7a40x_udc *dev;
-
-	const struct usb_endpoint_descriptor *desc;
-	struct list_head queue;
-	unsigned long pio_irqs;
-
-	u8 stopped;
-	u8 bEndpointAddress;
-	u8 bmAttributes;
-
-	ep_type_t ep_type;
-	u32 fifo;
-	u32 csr1;
-	u32 csr2;
-};
-
-struct lh7a40x_request {
-	struct usb_request req;
-	struct list_head queue;
-};
-
-struct lh7a40x_udc {
-	struct usb_gadget gadget;
-	struct usb_gadget_driver *driver;
-	struct device *dev;
-	spinlock_t lock;
-
-	int ep0state;
-	struct lh7a40x_ep ep[UDC_MAX_ENDPOINTS];
-
-	unsigned char usb_address;
-
-	unsigned req_pending:1, req_std:1, req_config:1;
-};
-
-extern struct lh7a40x_udc *the_controller;
-
-#define ep_is_in(EP) 		(((EP)->bEndpointAddress&USB_DIR_IN)==USB_DIR_IN)
-#define ep_index(EP) 		((EP)->bEndpointAddress&0xF)
-#define ep_maxpacket(EP) 	((EP)->ep.maxpacket)
-
-#endif
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f4062bba9d04..e7288639edb0 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1014,11 +1014,6 @@ MODULE_LICENSE ("GPL");
 #define OMAP3_PLATFORM_DRIVER	ohci_hcd_omap3_driver
 #endif
 
-#ifdef CONFIG_ARCH_LH7A404
-#include "ohci-lh7a404.c"
-#define PLATFORM_DRIVER		ohci_hcd_lh7a404_driver
-#endif
-
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #include "ohci-pxa27x.c"
 #define PLATFORM_DRIVER		ohci_hcd_pxa27x_driver
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
deleted file mode 100644
index 18d39f0463ee..000000000000
--- a/drivers/usb/host/ohci-lh7a404.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- *
- * Bus Glue for Sharp LH7A404
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-#include <mach/hardware.h>
-
-
-extern int usb_disabled(void);
-
-/*-------------------------------------------------------------------------*/
-
-static void lh7a404_start_hc(struct platform_device *dev)
-{
-	printk(KERN_DEBUG "%s: starting LH7A404 OHCI USB Controller\n",
-	       __FILE__);
-
-	/*
-	 * Now, carefully enable the USB clock, and take
-	 * the USB host controller out of reset.
-	 */
-	CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */
-	udelay(1000);
-	USBH_CMDSTATUS = OHCI_HCR;
-
-	printk(KERN_DEBUG "%s: Clock to USB host has been enabled \n", __FILE__);
-}
-
-static void lh7a404_stop_hc(struct platform_device *dev)
-{
-	printk(KERN_DEBUG "%s: stopping LH7A404 OHCI USB Controller\n",
-	       __FILE__);
-
-	CSC_PWRCNT &= ~CSC_PWRCNT_USBH_EN; /* Disable clock */
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-
-/**
- * usb_hcd_lh7a404_probe - initialize LH7A404-based HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- */
-int usb_hcd_lh7a404_probe (const struct hc_driver *driver,
-			  struct platform_device *dev)
-{
-	int retval;
-	struct usb_hcd *hcd;
-
-	if (dev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ");
-		return -ENOMEM;
-	}
-
-	hcd = usb_create_hcd(driver, &dev->dev, "lh7a404");
-	if (!hcd)
-		return -ENOMEM;
-	hcd->rsrc_start = dev->resource[0].start;
-	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
-
-	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		pr_debug("request_mem_region failed");
-		retval = -EBUSY;
-		goto err1;
-	}
-
-	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-	if (!hcd->regs) {
-		pr_debug("ioremap failed");
-		retval = -ENOMEM;
-		goto err2;
-	}
-
-	lh7a404_start_hc(dev);
-	ohci_hcd_init(hcd_to_ohci(hcd));
-
-	retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
-	if (retval == 0)
-		return retval;
-
-	lh7a404_stop_hc(dev);
-	iounmap(hcd->regs);
- err2:
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- err1:
-	usb_put_hcd(hcd);
-	return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_hcd_lh7a404_remove - shutdown processing for LH7A404-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_lh7a404_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-void usb_hcd_lh7a404_remove (struct usb_hcd *hcd, struct platform_device *dev)
-{
-	usb_remove_hcd(hcd);
-	lh7a404_stop_hc(dev);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int __devinit
-ohci_lh7a404_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-	ohci_dbg (ohci, "ohci_lh7a404_start, ohci:%p", ohci);
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run (ohci)) < 0) {
-		err ("can't start %s", hcd->self.bus_name);
-		ohci_stop (hcd);
-		return ret;
-	}
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_lh7a404_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"LH7A404 OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_lh7a404_start,
-	.stop =			ohci_stop,
-	.shutdown =		ohci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_lh7a404_drv_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	pr_debug ("In ohci_hcd_lh7a404_drv_probe");
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	ret = usb_hcd_lh7a404_probe(&ohci_lh7a404_hc_driver, pdev);
-	return ret;
-}
-
-static int ohci_hcd_lh7a404_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-	usb_hcd_lh7a404_remove(hcd, pdev);
-	return 0;
-}
-	/*TBD*/
-/*static int ohci_hcd_lh7a404_drv_suspend(struct platform_device *dev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-	return 0;
-}
-static int ohci_hcd_lh7a404_drv_resume(struct platform_device *dev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-
-	return 0;
-}
-*/
-
-static struct platform_driver ohci_hcd_lh7a404_driver = {
-	.probe		= ohci_hcd_lh7a404_drv_probe,
-	.remove		= ohci_hcd_lh7a404_drv_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
-	/*.suspend	= ohci_hcd_lh7a404_drv_suspend, */
-	/*.resume	= ohci_hcd_lh7a404_drv_resume, */
-	.driver		= {
-		.name	= "lh7a404-ohci",
-		.owner	= THIS_MODULE,
-	},
-};
-
-MODULE_ALIAS("platform:lh7a404-ohci");
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index bad11a72c202..35e5fd640ce7 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -575,18 +575,8 @@ static inline void _ohci_writel (const struct ohci_hcd *ohci,
 #endif
 }
 
-#ifdef CONFIG_ARCH_LH7A404
-/* Marc Singer: at the time this code was written, the LH7A404
- * had a problem reading the USB host registers.  This
- * implementation of the ohci_readl function performs the read
- * twice as a work-around.
- */
-#define ohci_readl(o,r)		(_ohci_readl(o,r),_ohci_readl(o,r))
-#define ohci_writel(o,v,r)	_ohci_writel(o,v,r)
-#else
 #define ohci_readl(o,r)		_ohci_readl(o,r)
 #define ohci_writel(o,v,r)	_ohci_writel(o,v,r)
-#endif
 
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6bafb51bb437..b57bc273b184 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -322,69 +322,6 @@ config FB_ARMCLCD
 	  here and read <file:Documentation/kbuild/modules.txt>.  The module
 	  will be called amba-clcd.
 
-choice
-
-	depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
-	prompt "LCD Panel"
-	default FB_ARMCLCD_SHARP_LQ035Q7DB02
-
-config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
-	bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
-	help
-	  This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
-	  color QVGA, HRTFT panel.  The LogicPD device includes
-	  an integrated HRTFT controller IC.
-	  The native resolution is 240x320.
-
-config FB_ARMCLCD_SHARP_LQ057Q3DC02
-	bool "LogicPD LCD 5.7\" QVGA"
-	help
-	  This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
-	  color QVGA, TFT panel.  The LogicPD device includes an
-	  The native resolution is 320x240.
-
-config FB_ARMCLCD_SHARP_LQ64D343
-	bool "LogicPD LCD 6.4\" VGA"
-	help
-	  This is an implementation of the Sharp LQ64D343, a 6.4"
-	  color VGA, TFT panel.  The LogicPD device includes an
-	  The native resolution is 640x480.
-
-config FB_ARMCLCD_SHARP_LQ10D368
-	bool "LogicPD LCD 10.4\" VGA"
-	help
-	  This is an implementation of the Sharp LQ10D368, a 10.4"
-	  color VGA, TFT panel.  The LogicPD device includes an
-	  The native resolution is 640x480.
-
-
-config FB_ARMCLCD_SHARP_LQ121S1DG41
-	bool "LogicPD LCD 12.1\" SVGA"
-	help
-	  This is an implementation of the Sharp LQ121S1DG41, a 12.1"
-	  color SVGA, TFT panel.  The LogicPD device includes an
-	  The native resolution is 800x600.
-
-	  This panel requires a clock rate may be an integer fraction
-	  of the base LCDCLK frequency.  The driver will select the
-	  highest frequency available that is lower than the maximum
-	  allowed.  The panel may flicker if the clock rate is
-	  slower than the recommended minimum.
-
-config FB_ARMCLCD_AUO_A070VW01_WIDE
-	bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
-	help
-	  This is an implementation of the AU Optronics, a 7.0"
-	  WIDE Color.  The native resolution is 234x480.
-
-config FB_ARMCLCD_HITACHI
-	bool "Hitachi Wide Screen 800x480"
-	help
-	  This is an implementation of the Hitachi 800x480.
-
-endchoice
-
-
 config FB_ACORN
 	bool "Acorn VIDC support"
 	depends on (FB = y) && ARM && ARCH_ACORN