Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) New ipset extensions for matching on destination MAC addresses, from
    Stefano Brivio.

 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
    nfp driver. From Stefano Brivio.

 3) Implement GRO for plain UDP sockets, from Paolo Abeni.

 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
    bit so that we could support the entire vlan_tci value.

 5) Rework the IPSEC policy lookups to better optimize more usecases,
    from Florian Westphal.

 6) Infrastructure changes eliminating direct manipulation of SKB lists
    wherever possible, and to always use the appropriate SKB list
    helpers. This work is still ongoing...

 7) Lots of PHY driver and state machine improvements and
    simplifications, from Heiner Kallweit.

 8) Various TSO deferral refinements, from Eric Dumazet.

 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
    Kallweit, including support for ->xmit_more. This driver has been
    getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
    the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
    completely from the tree as it no longer has any users. From Oz
    Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
    therefore abort the operation before the commit phase (which is the
    NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
    in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
    the auxiliary SKB data used by IPSEC and bridge netfilter, and is
    designed to support the needs to MPTCP which could be integrated in
    the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
  net: dccp: fix kernel crash on module load
  drivers/net: appletalk/cops: remove redundant if statement and mask
  bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
  net/net_namespace: Check the return value of register_pernet_subsys()
  net/netlink_compat: Fix a missing check of nla_parse_nested
  ieee802154: lowpan_header_create check must check daddr
  net/mlx4_core: drop useless LIST_HEAD
  mlxsw: spectrum: drop useless LIST_HEAD
  net/mlx5e: drop useless LIST_HEAD
  iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
  net/mlx5e: fix semicolon.cocci warnings
  staging: octeon: fix build failure with XFRM enabled
  net: Revert recent Spectre-v1 patches.
  can: af_can: Fix Spectre v1 vulnerability
  packet: validate address length if non-zero
  nfc: af_nfc: Fix Spectre v1 vulnerability
  phonet: af_phonet: Fix Spectre v1 vulnerability
  net: core: Fix Spectre v1 vulnerability
  net: minor cleanup in skb_ext_add()
  net: drop the unused helper skb_ext_get()
  ...

1 files changed, 51 insertions, 63 deletions

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 3ea87f774a76..da039f211c22 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -58,6 +58,11 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_ini
 #define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features)
 #define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features)
 
+extern const int phy_10_100_features_array[4];
+extern const int phy_basic_t1_features_array[2];
+extern const int phy_gbit_features_array[2];
+extern const int phy_10gbit_features_array[1];
+
 /*
  * Set phydev->irq to PHY_POLL if interrupts are not supported,
  * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
@@ -66,9 +71,8 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_ini
 #define PHY_POLL		-1
 #define PHY_IGNORE_INTERRUPT	-2
 
-#define PHY_HAS_INTERRUPT	0x00000001
-#define PHY_IS_INTERNAL		0x00000002
-#define PHY_RST_AFTER_CLK_EN	0x00000004
+#define PHY_IS_INTERNAL		0x00000001
+#define PHY_RST_AFTER_CLK_EN	0x00000002
 #define MDIO_DEVICE_IS_PHY	0x80000000
 
 /* Interface Mode definitions */
@@ -178,7 +182,6 @@ static inline const char *phy_modes(phy_interface_t interface)
 #define PHY_INIT_TIMEOUT	100000
 #define PHY_STATE_TIME		1
 #define PHY_FORCE_TIMEOUT	10
-#define PHY_AN_TIMEOUT		10
 
 #define PHY_MAX_ADDR	32
 
@@ -264,57 +267,27 @@ static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev)
 void devm_mdiobus_free(struct device *dev, struct mii_bus *bus);
 struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
 
-#define PHY_INTERRUPT_DISABLED	0x0
-#define PHY_INTERRUPT_ENABLED	0x80000000
+#define PHY_INTERRUPT_DISABLED	false
+#define PHY_INTERRUPT_ENABLED	true
 
 /* PHY state machine states:
  *
  * DOWN: PHY device and driver are not ready for anything.  probe
  * should be called if and only if the PHY is in this state,
  * given that the PHY device exists.
- * - PHY driver probe function will, depending on the PHY, set
- * the state to STARTING or READY
- *
- * STARTING:  PHY device is coming up, and the ethernet driver is
- * not ready.  PHY drivers may set this in the probe function.
- * If they do, they are responsible for making sure the state is
- * eventually set to indicate whether the PHY is UP or READY,
- * depending on the state when the PHY is done starting up.
- * - PHY driver will set the state to READY
- * - start will set the state to PENDING
+ * - PHY driver probe function will set the state to READY
  *
  * READY: PHY is ready to send and receive packets, but the
  * controller is not.  By default, PHYs which do not implement
- * probe will be set to this state by phy_probe().  If the PHY
- * driver knows the PHY is ready, and the PHY state is STARTING,
- * then it sets this STATE.
+ * probe will be set to this state by phy_probe().
  * - start will set the state to UP
  *
- * PENDING: PHY device is coming up, but the ethernet driver is
- * ready.  phy_start will set this state if the PHY state is
- * STARTING.
- * - PHY driver will set the state to UP when the PHY is ready
- *
  * UP: The PHY and attached device are ready to do work.
  * Interrupts should be started here.
- * - timer moves to AN
- *
- * AN: The PHY is currently negotiating the link state.  Link is
- * therefore down for now.  phy_timer will set this state when it
- * detects the state is UP.  config_aneg will set this state
- * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
- * - If autonegotiation finishes, but there's no link, it sets
- *   the state to NOLINK.
- * - If aneg finishes with link, it sets the state to RUNNING,
- *   and calls adjust_link
- * - If autonegotiation did not finish after an arbitrary amount
- *   of time, autonegotiation should be tried again if the PHY
- *   supports "magic" autonegotiation (back to AN)
- * - If it didn't finish, and no magic_aneg, move to FORCING.
+ * - timer moves to NOLINK or RUNNING
  *
  * NOLINK: PHY is up, but not currently plugged in.
- * - If the timer notes that the link comes back, we move to RUNNING
- * - config_aneg moves to AN
+ * - irq or timer will set RUNNING if link comes back
  * - phy_stop moves to HALTED
  *
  * FORCING: PHY is being configured with forced settings
@@ -325,11 +298,7 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
  *
  * RUNNING: PHY is currently up, running, and possibly sending
  * and/or receiving packets
- * - timer will set CHANGELINK if we're polling (this ensures the
- *   link state is polled every other cycle of this state machine,
- *   which makes it every other second)
- * - irq will set CHANGELINK
- * - config_aneg will set AN
+ * - irq or timer will set NOLINK if link goes down
  * - phy_stop moves to HALTED
  *
  * CHANGELINK: PHY experienced a change in link state
@@ -349,16 +318,13 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
  */
 enum phy_state {
 	PHY_DOWN = 0,
-	PHY_STARTING,
 	PHY_READY,
-	PHY_PENDING,
+	PHY_HALTED,
 	PHY_UP,
-	PHY_AN,
 	PHY_RUNNING,
 	PHY_NOLINK,
 	PHY_FORCING,
 	PHY_CHANGELINK,
-	PHY_HALTED,
 	PHY_RESUMING
 };
 
@@ -390,7 +356,6 @@ struct phy_c45_device_ids {
  * giving up on the current attempt at acquiring a link
  * irq: IRQ number of the PHY's interrupt (-1 if none)
  * phy_timer: The timer for handling the state machine
- * phy_queue: A work_queue for the phy_mac_interrupt
  * attached_dev: The attached enet driver's device instance ptr
  * adjust_link: Callback for the enet controller to respond to
  * changes in the link state.
@@ -427,6 +392,9 @@ struct phy_device {
 	/* The most recently read link state */
 	unsigned link:1;
 
+	/* Interrupts are enabled */
+	unsigned interrupts:1;
+
 	enum phy_state state;
 
 	u32 dev_flags;
@@ -442,14 +410,11 @@ struct phy_device {
 	int pause;
 	int asym_pause;
 
-	/* Enabled Interrupts */
-	u32 interrupts;
-
-	/* Union of PHY and Attached devices' supported modes */
-	/* See mii.h for more info */
-	u32 supported;
-	u32 advertising;
-	u32 lp_advertising;
+	/* Union of PHY and Attached devices' supported link modes */
+	/* See ethtool.h for more info */
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
 
 	/* Energy efficient ethernet modes which should be prohibited */
 	u32 eee_broken_modes;
@@ -475,7 +440,6 @@ struct phy_device {
 	void *priv;
 
 	/* Interrupt and Polling infrastructure */
-	struct work_struct phy_queue;
 	struct delayed_work state_queue;
 
 	struct mutex lock;
@@ -674,6 +638,10 @@ struct phy_driver {
 #define PHY_ANY_ID "MATCH ANY PHY"
 #define PHY_ANY_UID 0xffffffff
 
+#define PHY_ID_MATCH_EXACT(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 0)
+#define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4)
+#define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10)
+
 /* A Structure for boards to register fixups with the PHY Lib */
 struct phy_fixup {
 	struct list_head list;
@@ -697,9 +665,31 @@ struct phy_setting {
 
 const struct phy_setting *
 phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
-		   size_t maxbit, bool exact);
+		   bool exact);
 size_t phy_speeds(unsigned int *speeds, size_t size,
-		  unsigned long *mask, size_t maxbit);
+		  unsigned long *mask);
+
+static inline bool __phy_is_started(struct phy_device *phydev)
+{
+	WARN_ON(!mutex_is_locked(&phydev->lock));
+
+	return phydev->state >= PHY_UP;
+}
+
+/**
+ * phy_is_started - Convenience function to check whether PHY is started
+ * @phydev: The phy_device struct
+ */
+static inline bool phy_is_started(struct phy_device *phydev)
+{
+	bool started;
+
+	mutex_lock(&phydev->lock);
+	started = __phy_is_started(phydev);
+	mutex_unlock(&phydev->lock);
+
+	return started;
+}
 
 void phy_resolve_aneg_linkmode(struct phy_device *phydev);
 
@@ -1050,11 +1040,9 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner);
 int phy_drivers_register(struct phy_driver *new_driver, int n,
 			 struct module *owner);
 void phy_state_machine(struct work_struct *work);
-void phy_change_work(struct work_struct *work);
 void phy_mac_interrupt(struct phy_device *phydev);
 void phy_start_machine(struct phy_device *phydev);
 void phy_stop_machine(struct phy_device *phydev);
-void phy_trigger_machine(struct phy_device *phydev);
 int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
 void phy_ethtool_ksettings_get(struct phy_device *phydev,
 			       struct ethtool_link_ksettings *cmd);