diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-15 18:42:13 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-15 18:42:13 -0700 |
| commit | 9ff9b0d392ea08090cd1780fb196f36dbb586529 (patch) | |
| tree | 276a3a5c4525b84dee64eda30b423fc31bf94850 /include/linux | |
| parent | Merge tag 'integrity-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity (diff) | |
| parent | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next (diff) | |
| download | wireguard-linux-9ff9b0d392ea08090cd1780fb196f36dbb586529.tar.xz wireguard-linux-9ff9b0d392ea08090cd1780fb196f36dbb586529.zip | |
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
Diffstat (limited to 'include/linux')
51 files changed, 1598 insertions, 454 deletions
diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h index 64f367044e25..2f98d2fce62e 100644 --- a/include/linux/bpf-cgroup.h +++ b/include/linux/bpf-cgroup.h @@ -279,6 +279,31 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *map, void *key, #define BPF_CGROUP_RUN_PROG_UDP6_RECVMSG_LOCK(sk, uaddr) \ BPF_CGROUP_RUN_SA_PROG_LOCK(sk, uaddr, BPF_CGROUP_UDP6_RECVMSG, NULL) +/* The SOCK_OPS"_SK" macro should be used when sock_ops->sk is not a + * fullsock and its parent fullsock cannot be traced by + * sk_to_full_sk(). + * + * e.g. sock_ops->sk is a request_sock and it is under syncookie mode. + * Its listener-sk is not attached to the rsk_listener. + * In this case, the caller holds the listener-sk (unlocked), + * set its sock_ops->sk to req_sk, and call this SOCK_OPS"_SK" with + * the listener-sk such that the cgroup-bpf-progs of the + * listener-sk will be run. + * + * Regardless of syncookie mode or not, + * calling bpf_setsockopt on listener-sk will not make sense anyway, + * so passing 'sock_ops->sk == req_sk' to the bpf prog is appropriate here. + */ +#define BPF_CGROUP_RUN_PROG_SOCK_OPS_SK(sock_ops, sk) \ +({ \ + int __ret = 0; \ + if (cgroup_bpf_enabled) \ + __ret = __cgroup_bpf_run_filter_sock_ops(sk, \ + sock_ops, \ + BPF_CGROUP_SOCK_OPS); \ + __ret; \ +}) + #define BPF_CGROUP_RUN_PROG_SOCK_OPS(sock_ops) \ ({ \ int __ret = 0; \ diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 55f694b63164..2b16bf48aab6 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -34,6 +34,8 @@ struct btf_type; struct exception_table_entry; struct seq_operations; struct bpf_iter_aux_info; +struct bpf_local_storage; +struct bpf_local_storage_map; extern struct idr btf_idr; extern spinlock_t btf_idr_lock; @@ -80,7 +82,7 @@ struct bpf_map_ops { void *(*map_fd_get_ptr)(struct bpf_map *map, struct file *map_file, int fd); void (*map_fd_put_ptr)(void *ptr); - u32 (*map_gen_lookup)(struct bpf_map *map, struct bpf_insn *insn_buf); + int (*map_gen_lookup)(struct bpf_map *map, struct bpf_insn *insn_buf); u32 (*map_fd_sys_lookup_elem)(void *ptr); void (*map_seq_show_elem)(struct bpf_map *map, void *key, struct seq_file *m); @@ -104,6 +106,25 @@ struct bpf_map_ops { __poll_t (*map_poll)(struct bpf_map *map, struct file *filp, struct poll_table_struct *pts); + /* Functions called by bpf_local_storage maps */ + int (*map_local_storage_charge)(struct bpf_local_storage_map *smap, + void *owner, u32 size); + void (*map_local_storage_uncharge)(struct bpf_local_storage_map *smap, + void *owner, u32 size); + struct bpf_local_storage __rcu ** (*map_owner_storage_ptr)(void *owner); + + /* map_meta_equal must be implemented for maps that can be + * used as an inner map. It is a runtime check to ensure + * an inner map can be inserted to an outer map. + * + * Some properties of the inner map has been used during the + * verification time. When inserting an inner map at the runtime, + * map_meta_equal has to ensure the inserting map has the same + * properties that the verifier has used earlier. + */ + bool (*map_meta_equal)(const struct bpf_map *meta0, + const struct bpf_map *meta1); + /* BTF name and id of struct allocated by map_alloc */ const char * const map_btf_name; int *map_btf_id; @@ -227,6 +248,9 @@ int map_check_no_btf(const struct bpf_map *map, const struct btf_type *key_type, const struct btf_type *value_type); +bool bpf_map_meta_equal(const struct bpf_map *meta0, + const struct bpf_map *meta1); + extern const struct bpf_map_ops bpf_map_offload_ops; /* function argument constraints */ @@ -268,6 +292,9 @@ enum bpf_arg_type { ARG_PTR_TO_ALLOC_MEM, /* pointer to dynamically allocated memory */ ARG_PTR_TO_ALLOC_MEM_OR_NULL, /* pointer to dynamically allocated memory or NULL */ ARG_CONST_ALLOC_SIZE_OR_ZERO, /* number of allocated bytes requested */ + ARG_PTR_TO_BTF_ID_SOCK_COMMON, /* pointer to in-kernel sock_common or bpf-mirrored bpf_sock */ + ARG_PTR_TO_PERCPU_BTF_ID, /* pointer to in-kernel percpu type */ + __BPF_ARG_TYPE_MAX, }; /* type of values returned from helper functions */ @@ -281,6 +308,8 @@ enum bpf_return_type { RET_PTR_TO_SOCK_COMMON_OR_NULL, /* returns a pointer to a sock_common or NULL */ RET_PTR_TO_ALLOC_MEM_OR_NULL, /* returns a pointer to dynamically allocated memory or NULL */ RET_PTR_TO_BTF_ID_OR_NULL, /* returns a pointer to a btf_id or NULL */ + RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL, /* returns a pointer to a valid memory or a btf_id or NULL */ + RET_PTR_TO_MEM_OR_BTF_ID, /* returns a pointer to a valid memory or a btf_id */ }; /* eBPF function prototype used by verifier to allow BPF_CALLs from eBPF programs @@ -302,13 +331,18 @@ struct bpf_func_proto { }; enum bpf_arg_type arg_type[5]; }; - int *btf_id; /* BTF ids of arguments */ - bool (*check_btf_id)(u32 btf_id, u32 arg); /* if the argument btf_id is - * valid. Often used if more - * than one btf id is permitted - * for this argument. - */ + union { + struct { + u32 *arg1_btf_id; + u32 *arg2_btf_id; + u32 *arg3_btf_id; + u32 *arg4_btf_id; + u32 *arg5_btf_id; + }; + u32 *arg_btf_id[5]; + }; int *ret_btf_id; /* return value btf_id */ + bool (*allowed)(const struct bpf_prog *prog); }; /* bpf_context is intentionally undefined structure. Pointer to bpf_context is @@ -352,14 +386,29 @@ enum bpf_reg_type { PTR_TO_TCP_SOCK_OR_NULL, /* reg points to struct tcp_sock or NULL */ PTR_TO_TP_BUFFER, /* reg points to a writable raw tp's buffer */ PTR_TO_XDP_SOCK, /* reg points to struct xdp_sock */ - PTR_TO_BTF_ID, /* reg points to kernel struct */ - PTR_TO_BTF_ID_OR_NULL, /* reg points to kernel struct or NULL */ + /* PTR_TO_BTF_ID points to a kernel struct that does not need + * to be null checked by the BPF program. This does not imply the + * pointer is _not_ null and in practice this can easily be a null + * pointer when reading pointer chains. The assumption is program + * context will handle null pointer dereference typically via fault + * handling. The verifier must keep this in mind and can make no + * assumptions about null or non-null when doing branch analysis. + * Further, when passed into helpers the helpers can not, without + * additional context, assume the value is non-null. + */ + PTR_TO_BTF_ID, + /* PTR_TO_BTF_ID_OR_NULL points to a kernel struct that has not + * been checked for null. Used primarily to inform the verifier + * an explicit null check is required for this struct. + */ + PTR_TO_BTF_ID_OR_NULL, PTR_TO_MEM, /* reg points to valid memory region */ PTR_TO_MEM_OR_NULL, /* reg points to valid memory region or NULL */ PTR_TO_RDONLY_BUF, /* reg points to a readonly buffer */ PTR_TO_RDONLY_BUF_OR_NULL, /* reg points to a readonly buffer or NULL */ PTR_TO_RDWR_BUF, /* reg points to a read/write buffer */ PTR_TO_RDWR_BUF_OR_NULL, /* reg points to a read/write buffer or NULL */ + PTR_TO_PERCPU_BTF_ID, /* reg points to a percpu kernel variable */ }; /* The information passed from prog-specific *_is_valid_access @@ -514,6 +563,8 @@ int arch_prepare_bpf_trampoline(void *image, void *image_end, /* these two functions are called from generated trampoline */ u64 notrace __bpf_prog_enter(void); void notrace __bpf_prog_exit(struct bpf_prog *prog, u64 start); +void notrace __bpf_prog_enter_sleepable(void); +void notrace __bpf_prog_exit_sleepable(void); struct bpf_ksym { unsigned long start; @@ -559,6 +610,13 @@ struct bpf_trampoline { struct bpf_ksym ksym; }; +struct bpf_attach_target_info { + struct btf_func_model fmodel; + long tgt_addr; + const char *tgt_name; + const struct btf_type *tgt_type; +}; + #define BPF_DISPATCHER_MAX 48 /* Fits in 2048B */ struct bpf_dispatcher_prog { @@ -586,9 +644,10 @@ static __always_inline unsigned int bpf_dispatcher_nop_func( return bpf_func(ctx, insnsi); } #ifdef CONFIG_BPF_JIT -struct bpf_trampoline *bpf_trampoline_lookup(u64 key); -int bpf_trampoline_link_prog(struct bpf_prog *prog); -int bpf_trampoline_unlink_prog(struct bpf_prog *prog); +int bpf_trampoline_link_prog(struct bpf_prog *prog, struct bpf_trampoline *tr); +int bpf_trampoline_unlink_prog(struct bpf_prog *prog, struct bpf_trampoline *tr); +struct bpf_trampoline *bpf_trampoline_get(u64 key, + struct bpf_attach_target_info *tgt_info); void bpf_trampoline_put(struct bpf_trampoline *tr); #define BPF_DISPATCHER_INIT(_name) { \ .mutex = __MUTEX_INITIALIZER(_name.mutex), \ @@ -633,17 +692,20 @@ void bpf_image_ksym_del(struct bpf_ksym *ksym); void bpf_ksym_add(struct bpf_ksym *ksym); void bpf_ksym_del(struct bpf_ksym *ksym); #else -static inline struct bpf_trampoline *bpf_trampoline_lookup(u64 key) +static inline int bpf_trampoline_link_prog(struct bpf_prog *prog, + struct bpf_trampoline *tr) { - return NULL; + return -ENOTSUPP; } -static inline int bpf_trampoline_link_prog(struct bpf_prog *prog) +static inline int bpf_trampoline_unlink_prog(struct bpf_prog *prog, + struct bpf_trampoline *tr) { return -ENOTSUPP; } -static inline int bpf_trampoline_unlink_prog(struct bpf_prog *prog) +static inline struct bpf_trampoline *bpf_trampoline_get(u64 key, + struct bpf_attach_target_info *tgt_info) { - return -ENOTSUPP; + return ERR_PTR(-EOPNOTSUPP); } static inline void bpf_trampoline_put(struct bpf_trampoline *tr) {} #define DEFINE_BPF_DISPATCHER(name) @@ -670,16 +732,19 @@ enum bpf_jit_poke_reason { /* Descriptor of pokes pointing /into/ the JITed image. */ struct bpf_jit_poke_descriptor { - void *ip; + void *tailcall_target; + void *tailcall_bypass; + void *bypass_addr; union { struct { struct bpf_map *map; u32 key; } tail_call; }; - bool ip_stable; + bool tailcall_target_stable; u8 adj_off; u16 reason; + u32 insn_idx; }; /* reg_type info for ctx arguments */ @@ -704,13 +769,18 @@ struct bpf_prog_aux { u32 max_rdonly_access; u32 max_rdwr_access; const struct bpf_ctx_arg_aux *ctx_arg_info; - struct bpf_prog *linked_prog; + struct mutex dst_mutex; /* protects dst_* pointers below, *after* prog becomes visible */ + struct bpf_prog *dst_prog; + struct bpf_trampoline *dst_trampoline; + enum bpf_prog_type saved_dst_prog_type; + enum bpf_attach_type saved_dst_attach_type; bool verifier_zext; /* Zero extensions has been inserted by verifier. */ bool offload_requested; bool attach_btf_trace; /* true if attaching to BTF-enabled raw tp */ bool func_proto_unreliable; + bool sleepable; + bool tail_call_reachable; enum bpf_tramp_prog_type trampoline_prog_type; - struct bpf_trampoline *trampoline; struct hlist_node tramp_hlist; /* BTF_KIND_FUNC_PROTO for valid attach_btf_id */ const struct btf_type *attach_func_proto; @@ -723,6 +793,7 @@ struct bpf_prog_aux { struct bpf_ksym ksym; const struct bpf_prog_ops *ops; struct bpf_map **used_maps; + struct mutex used_maps_mutex; /* mutex for used_maps and used_map_cnt */ struct bpf_prog *prog; struct user_struct *user; u64 load_time; /* ns since boottime */ @@ -1218,12 +1289,18 @@ typedef int (*bpf_iter_attach_target_t)(struct bpf_prog *prog, union bpf_iter_link_info *linfo, struct bpf_iter_aux_info *aux); typedef void (*bpf_iter_detach_target_t)(struct bpf_iter_aux_info *aux); +typedef void (*bpf_iter_show_fdinfo_t) (const struct bpf_iter_aux_info *aux, + struct seq_file *seq); +typedef int (*bpf_iter_fill_link_info_t)(const struct bpf_iter_aux_info *aux, + struct bpf_link_info *info); #define BPF_ITER_CTX_ARG_MAX 2 struct bpf_iter_reg { const char *target; bpf_iter_attach_target_t attach_target; bpf_iter_detach_target_t detach_target; + bpf_iter_show_fdinfo_t show_fdinfo; + bpf_iter_fill_link_info_t fill_link_info; u32 ctx_arg_info_size; struct bpf_ctx_arg_aux ctx_arg_info[BPF_ITER_CTX_ARG_MAX]; const struct bpf_iter_seq_info *seq_info; @@ -1250,6 +1327,10 @@ int bpf_iter_new_fd(struct bpf_link *link); bool bpf_link_is_iter(struct bpf_link *link); struct bpf_prog *bpf_iter_get_info(struct bpf_iter_meta *meta, bool in_stop); int bpf_iter_run_prog(struct bpf_prog *prog, void *ctx); +void bpf_iter_map_show_fdinfo(const struct bpf_iter_aux_info *aux, + struct seq_file *seq); +int bpf_iter_map_fill_link_info(const struct bpf_iter_aux_info *aux, + struct bpf_link_info *info); int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value); int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value); @@ -1292,6 +1373,8 @@ int bpf_check(struct bpf_prog **fp, union bpf_attr *attr, union bpf_attr __user *uattr); void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth); +struct btf *bpf_get_btf_vmlinux(void); + /* Map specifics */ struct xdp_buff; struct sk_buff; @@ -1333,6 +1416,9 @@ int bpf_prog_test_run_tracing(struct bpf_prog *prog, int bpf_prog_test_run_flow_dissector(struct bpf_prog *prog, const union bpf_attr *kattr, union bpf_attr __user *uattr); +int bpf_prog_test_run_raw_tp(struct bpf_prog *prog, + const union bpf_attr *kattr, + union bpf_attr __user *uattr); bool btf_ctx_access(int off, int size, enum bpf_access_type type, const struct bpf_prog *prog, struct bpf_insn_access_aux *info); @@ -1340,8 +1426,8 @@ int btf_struct_access(struct bpf_verifier_log *log, const struct btf_type *t, int off, int size, enum bpf_access_type atype, u32 *next_btf_id); -int btf_resolve_helper_id(struct bpf_verifier_log *log, - const struct bpf_func_proto *fn, int); +bool btf_struct_ids_match(struct bpf_verifier_log *log, + int off, u32 id, u32 need_type_id); int btf_distill_func_proto(struct bpf_verifier_log *log, struct btf *btf, @@ -1354,10 +1440,11 @@ int btf_check_func_arg_match(struct bpf_verifier_env *env, int subprog, struct bpf_reg_state *regs); int btf_prepare_func_args(struct bpf_verifier_env *env, int subprog, struct bpf_reg_state *reg); -int btf_check_type_match(struct bpf_verifier_env *env, struct bpf_prog *prog, +int btf_check_type_match(struct bpf_verifier_log *log, const struct bpf_prog *prog, struct btf *btf, const struct btf_type *t); struct bpf_prog *bpf_prog_by_id(u32 id); +struct bpf_link *bpf_link_by_id(u32 id); const struct bpf_func_proto *bpf_base_func_proto(enum bpf_func_id func_id); #else /* !CONFIG_BPF_SYSCALL */ @@ -1637,6 +1724,7 @@ int sock_map_prog_update(struct bpf_map *map, struct bpf_prog *prog, struct bpf_prog *old, u32 which); int sock_map_get_from_fd(const union bpf_attr *attr, struct bpf_prog *prog); int sock_map_prog_detach(const union bpf_attr *attr, enum bpf_prog_type ptype); +int sock_map_update_elem_sys(struct bpf_map *map, void *key, void *value, u64 flags); void sock_map_unhash(struct sock *sk); void sock_map_close(struct sock *sk, long timeout); #else @@ -1658,6 +1746,12 @@ static inline int sock_map_prog_detach(const union bpf_attr *attr, { return -EOPNOTSUPP; } + +static inline int sock_map_update_elem_sys(struct bpf_map *map, void *key, void *value, + u64 flags) +{ + return -EOPNOTSUPP; +} #endif /* CONFIG_BPF_STREAM_PARSER */ #if defined(CONFIG_INET) && defined(CONFIG_BPF_SYSCALL) @@ -1736,6 +1830,10 @@ extern const struct bpf_func_proto bpf_skc_to_tcp_sock_proto; extern const struct bpf_func_proto bpf_skc_to_tcp_timewait_sock_proto; extern const struct bpf_func_proto bpf_skc_to_tcp_request_sock_proto; extern const struct bpf_func_proto bpf_skc_to_udp6_sock_proto; +extern const struct bpf_func_proto bpf_copy_from_user_proto; +extern const struct bpf_func_proto bpf_snprintf_btf_proto; +extern const struct bpf_func_proto bpf_per_cpu_ptr_proto; +extern const struct bpf_func_proto bpf_this_cpu_ptr_proto; const struct bpf_func_proto *bpf_tracing_func_proto( enum bpf_func_id func_id, const struct bpf_prog *prog); @@ -1850,4 +1948,7 @@ enum bpf_text_poke_type { int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t, void *addr1, void *addr2); +struct btf_id_set; +bool btf_id_set_contains(const struct btf_id_set *set, u32 id); + #endif /* _LINUX_BPF_H */ diff --git a/include/linux/bpf_local_storage.h b/include/linux/bpf_local_storage.h new file mode 100644 index 000000000000..b2c9463f36a1 --- /dev/null +++ b/include/linux/bpf_local_storage.h @@ -0,0 +1,163 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019 Facebook + * Copyright 2020 Google LLC. + */ + +#ifndef _BPF_LOCAL_STORAGE_H +#define _BPF_LOCAL_STORAGE_H + +#include <linux/bpf.h> +#include <linux/rculist.h> +#include <linux/list.h> +#include <linux/hash.h> +#include <linux/types.h> +#include <uapi/linux/btf.h> + +#define BPF_LOCAL_STORAGE_CACHE_SIZE 16 + +struct bpf_local_storage_map_bucket { + struct hlist_head list; + raw_spinlock_t lock; +}; + +/* Thp map is not the primary owner of a bpf_local_storage_elem. + * Instead, the container object (eg. sk->sk_bpf_storage) is. + * + * The map (bpf_local_storage_map) is for two purposes + * 1. Define the size of the "local storage". It is + * the map's value_size. + * + * 2. Maintain a list to keep track of all elems such + * that they can be cleaned up during the map destruction. + * + * When a bpf local storage is being looked up for a + * particular object, the "bpf_map" pointer is actually used + * as the "key" to search in the list of elem in + * the respective bpf_local_storage owned by the object. + * + * e.g. sk->sk_bpf_storage is the mini-map with the "bpf_map" pointer + * as the searching key. + */ +struct bpf_local_storage_map { + struct bpf_map map; + /* Lookup elem does not require accessing the map. + * + * Updating/Deleting requires a bucket lock to + * link/unlink the elem from the map. Having + * multiple buckets to improve contention. + */ + struct bpf_local_storage_map_bucket *buckets; + u32 bucket_log; + u16 elem_size; + u16 cache_idx; +}; + +struct bpf_local_storage_data { + /* smap is used as the searching key when looking up + * from the object's bpf_local_storage. + * + * Put it in the same cacheline as the data to minimize + * the number of cachelines access during the cache hit case. + */ + struct bpf_local_storage_map __rcu *smap; + u8 data[] __aligned(8); +}; + +/* Linked to bpf_local_storage and bpf_local_storage_map */ +struct bpf_local_storage_elem { + struct hlist_node map_node; /* Linked to bpf_local_storage_map */ + struct hlist_node snode; /* Linked to bpf_local_storage */ + struct bpf_local_storage __rcu *local_storage; + struct rcu_head rcu; + /* 8 bytes hole */ + /* The data is stored in aother cacheline to minimize + * the number of cachelines access during a cache hit. + */ + struct bpf_local_storage_data sdata ____cacheline_aligned; +}; + +struct bpf_local_storage { + struct bpf_local_storage_data __rcu *cache[BPF_LOCAL_STORAGE_CACHE_SIZE]; + struct hlist_head list; /* List of bpf_local_storage_elem */ + void *owner; /* The object that owns the above "list" of + * bpf_local_storage_elem. + */ + struct rcu_head rcu; + raw_spinlock_t lock; /* Protect adding/removing from the "list" */ +}; + +/* U16_MAX is much more than enough for sk local storage + * considering a tcp_sock is ~2k. + */ +#define BPF_LOCAL_STORAGE_MAX_VALUE_SIZE \ + min_t(u32, \ + (KMALLOC_MAX_SIZE - MAX_BPF_STACK - \ + sizeof(struct bpf_local_storage_elem)), \ + (U16_MAX - sizeof(struct bpf_local_storage_elem))) + +#define SELEM(_SDATA) \ + container_of((_SDATA), struct bpf_local_storage_elem, sdata) +#define SDATA(_SELEM) (&(_SELEM)->sdata) + +#define BPF_LOCAL_STORAGE_CACHE_SIZE 16 + +struct bpf_local_storage_cache { + spinlock_t idx_lock; + u64 idx_usage_counts[BPF_LOCAL_STORAGE_CACHE_SIZE]; +}; + +#define DEFINE_BPF_STORAGE_CACHE(name) \ +static struct bpf_local_storage_cache name = { \ + .idx_lock = __SPIN_LOCK_UNLOCKED(name.idx_lock), \ +} + +u16 bpf_local_storage_cache_idx_get(struct bpf_local_storage_cache *cache); +void bpf_local_storage_cache_idx_free(struct bpf_local_storage_cache *cache, + u16 idx); + +/* Helper functions for bpf_local_storage */ +int bpf_local_storage_map_alloc_check(union bpf_attr *attr); + +struct bpf_local_storage_map *bpf_local_storage_map_alloc(union bpf_attr *attr); + +struct bpf_local_storage_data * +bpf_local_storage_lookup(struct bpf_local_storage *local_storage, + struct bpf_local_storage_map *smap, + bool cacheit_lockit); + +void bpf_local_storage_map_free(struct bpf_local_storage_map *smap); + +int bpf_local_storage_map_check_btf(const struct bpf_map *map, + const struct btf *btf, + const struct btf_type *key_type, + const struct btf_type *value_type); + +void bpf_selem_link_storage_nolock(struct bpf_local_storage *local_storage, + struct bpf_local_storage_elem *selem); + +bool bpf_selem_unlink_storage_nolock(struct bpf_local_storage *local_storage, + struct bpf_local_storage_elem *selem, + bool uncharge_omem); + +void bpf_selem_unlink(struct bpf_local_storage_elem *selem); + +void bpf_selem_link_map(struct bpf_local_storage_map *smap, + struct bpf_local_storage_elem *selem); + +void bpf_selem_unlink_map(struct bpf_local_storage_elem *selem); + +struct bpf_local_storage_elem * +bpf_selem_alloc(struct bpf_local_storage_map *smap, void *owner, void *value, + bool charge_mem); + +int +bpf_local_storage_alloc(void *owner, + struct bpf_local_storage_map *smap, + struct bpf_local_storage_elem *first_selem); + +struct bpf_local_storage_data * +bpf_local_storage_update(void *owner, struct bpf_local_storage_map *smap, + void *value, u64 map_flags); + +#endif /* _BPF_LOCAL_STORAGE_H */ diff --git a/include/linux/bpf_lsm.h b/include/linux/bpf_lsm.h index af74712af585..aaacb6aafc87 100644 --- a/include/linux/bpf_lsm.h +++ b/include/linux/bpf_lsm.h @@ -17,9 +17,28 @@ #include <linux/lsm_hook_defs.h> #undef LSM_HOOK +struct bpf_storage_blob { + struct bpf_local_storage __rcu *storage; +}; + +extern struct lsm_blob_sizes bpf_lsm_blob_sizes; + int bpf_lsm_verify_prog(struct bpf_verifier_log *vlog, const struct bpf_prog *prog); +static inline struct bpf_storage_blob *bpf_inode( + const struct inode *inode) +{ + if (unlikely(!inode->i_security)) + return NULL; + + return inode->i_security + bpf_lsm_blob_sizes.lbs_inode; +} + +extern const struct bpf_func_proto bpf_inode_storage_get_proto; +extern const struct bpf_func_proto bpf_inode_storage_delete_proto; +void bpf_inode_storage_free(struct inode *inode); + #else /* !CONFIG_BPF_LSM */ static inline int bpf_lsm_verify_prog(struct bpf_verifier_log *vlog, @@ -28,6 +47,16 @@ static inline int bpf_lsm_verify_prog(struct bpf_verifier_log *vlog, return -EOPNOTSUPP; } +static inline struct bpf_storage_blob *bpf_inode( + const struct inode *inode) +{ + return NULL; +} + +static inline void bpf_inode_storage_free(struct inode *inode) +{ +} + #endif /* CONFIG_BPF_LSM */ #endif /* _LINUX_BPF_LSM_H */ diff --git a/include/linux/bpf_types.h b/include/linux/bpf_types.h index a52a5688418e..2e6f568377f1 100644 --- a/include/linux/bpf_types.h +++ b/include/linux/bpf_types.h @@ -107,6 +107,9 @@ BPF_MAP_TYPE(BPF_MAP_TYPE_SK_STORAGE, sk_storage_map_ops) BPF_MAP_TYPE(BPF_MAP_TYPE_SOCKMAP, sock_map_ops) BPF_MAP_TYPE(BPF_MAP_TYPE_SOCKHASH, sock_hash_ops) #endif +#ifdef CONFIG_BPF_LSM +BPF_MAP_TYPE(BPF_MAP_TYPE_INODE_STORAGE, inode_storage_map_ops) +#endif BPF_MAP_TYPE(BPF_MAP_TYPE_CPUMAP, cpu_map_ops) #if defined(CONFIG_XDP_SOCKETS) BPF_MAP_TYPE(BPF_MAP_TYPE_XSKMAP, xsk_map_ops) diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index 53c7bd568c5d..e83ef6f6bf43 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -308,6 +308,13 @@ struct bpf_insn_aux_data { u32 map_index; /* index into used_maps[] */ u32 map_off; /* offset from value base address */ }; + struct { + enum bpf_reg_type reg_type; /* type of pseudo_btf_id */ + union { + u32 btf_id; /* btf_id for struct typed var */ + u32 mem_size; /* mem_size for non-struct typed var */ + }; + } btf_var; }; u64 map_key_state; /* constant (32 bit) key tracking for maps */ int ctx_field_size; /* the ctx field size for load insn, maybe 0 */ @@ -347,8 +354,9 @@ static inline bool bpf_verifier_log_full(const struct bpf_verifier_log *log) static inline bool bpf_verifier_log_needed(const struct bpf_verifier_log *log) { - return (log->level && log->ubuf && !bpf_verifier_log_full(log)) || - log->level == BPF_LOG_KERNEL; + return log && + ((log->level && log->ubuf && !bpf_verifier_log_full(log)) || + log->level == BPF_LOG_KERNEL); } #define BPF_MAX_SUBPROGS 256 @@ -358,6 +366,9 @@ struct bpf_subprog_info { u32 start; /* insn idx of function entry point */ u32 linfo_idx; /* The idx to the main_prog->aux->linfo */ u16 stack_depth; /* max. stack depth used by this function */ + bool has_tail_call; + bool tail_call_reachable; + bool has_ld_abs; }; /* single container for all structs @@ -446,4 +457,17 @@ bpf_prog_offload_remove_insns(struct bpf_verifier_env *env, u32 off, u32 cnt); int check_ctx_reg(struct bpf_verifier_env *env, const struct bpf_reg_state *reg, int regno); +/* this lives here instead of in bpf.h because it needs to dereference tgt_prog */ +static inline u64 bpf_trampoline_compute_key(const struct bpf_prog *tgt_prog, + u32 btf_id) +{ + return tgt_prog ? (((u64)tgt_prog->aux->id) << 32 | btf_id) : btf_id; +} + +int bpf_check_attach_target(struct bpf_verifier_log *log, + const struct bpf_prog *prog, + const struct bpf_prog *tgt_prog, + u32 btf_id, + struct bpf_attach_target_info *tgt_info); + #endif /* _LINUX_BPF_VERIFIER_H */ diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 6ad4c000661a..d0bd226d6bd9 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -30,6 +30,7 @@ #define PHY_ID_BCM57780 0x03625d90 #define PHY_ID_BCM89610 0x03625cd0 +#define PHY_ID_BCM72113 0x35905310 #define PHY_ID_BCM7250 0xae025280 #define PHY_ID_BCM7255 0xae025120 #define PHY_ID_BCM7260 0xae025190 diff --git a/include/linux/btf.h b/include/linux/btf.h index 8b81fbb4497c..2bf641829664 100644 --- a/include/linux/btf.h +++ b/include/linux/btf.h @@ -6,6 +6,7 @@ #include <linux/types.h> #include <uapi/linux/btf.h> +#include <uapi/linux/bpf.h> #define BTF_TYPE_EMIT(type) ((void)(type *)0) @@ -13,6 +14,7 @@ struct btf; struct btf_member; struct btf_type; union bpf_attr; +struct btf_show; extern const struct file_operations btf_fops; @@ -46,8 +48,45 @@ int btf_get_info_by_fd(const struct btf *btf, const struct btf_type *btf_type_id_size(const struct btf *btf, u32 *type_id, u32 *ret_size); + +/* + * Options to control show behaviour. + * - BTF_SHOW_COMPACT: no formatting around type information + * - BTF_SHOW_NONAME: no struct/union member names/types + * - BTF_SHOW_PTR_RAW: show raw (unobfuscated) pointer values; + * equivalent to %px. + * - BTF_SHOW_ZERO: show zero-valued struct/union members; they + * are not displayed by default + * - BTF_SHOW_UNSAFE: skip use of bpf_probe_read() to safely read + * data before displaying it. + */ +#define BTF_SHOW_COMPACT BTF_F_COMPACT +#define BTF_SHOW_NONAME BTF_F_NONAME +#define BTF_SHOW_PTR_RAW BTF_F_PTR_RAW +#define BTF_SHOW_ZERO BTF_F_ZERO +#define BTF_SHOW_UNSAFE (1ULL << 4) + void btf_type_seq_show(const struct btf *btf, u32 type_id, void *obj, struct seq_file *m); +int btf_type_seq_show_flags(const struct btf *btf, u32 type_id, void *obj, + struct seq_file *m, u64 flags); + +/* + * Copy len bytes of string representation of obj of BTF type_id into buf. + * + * @btf: struct btf object + * @type_id: type id of type obj points to + * @obj: pointer to typed data + * @buf: buffer to write to + * @len: maximum length to write to buf + * @flags: show options (see above) + * + * Return: length that would have been/was copied as per snprintf, or + * negative error. + */ +int btf_type_snprintf_show(const struct btf *btf, u32 type_id, void *obj, + char *buf, int len, u64 flags); + int btf_get_fd_by_id(u32 id); u32 btf_id(const struct btf *btf); bool btf_member_is_reg_int(const struct btf *btf, const struct btf_type *s, @@ -64,14 +103,18 @@ const struct btf_type *btf_type_resolve_func_ptr(const struct btf *btf, u32 id, u32 *res_id); const struct btf_type * btf_resolve_size(const struct btf *btf, const struct btf_type *type, - u32 *type_size, const struct btf_type **elem_type, - u32 *total_nelems); + u32 *type_size); #define for_each_member(i, struct_type, member) \ for (i = 0, member = btf_type_member(struct_type); \ i < btf_type_vlen(struct_type); \ i++, member++) +#define for_each_vsi(i, datasec_type, member) \ + for (i = 0, member = btf_type_var_secinfo(datasec_type); \ + i < btf_type_vlen(datasec_type); \ + i++, member++) + static inline bool btf_type_is_ptr(const struct btf_type *t) { return BTF_INFO_KIND(t->info) == BTF_KIND_PTR; @@ -107,6 +150,21 @@ static inline bool btf_type_is_func_proto(const struct btf_type *t) return BTF_INFO_KIND(t->info) == BTF_KIND_FUNC_PROTO; } +static inline bool btf_type_is_var(const struct btf_type *t) +{ + return BTF_INFO_KIND(t->info) == BTF_KIND_VAR; +} + +/* union is only a special case of struct: + * all its offsetof(member) == 0 + */ +static inline bool btf_type_is_struct(const struct btf_type *t) +{ + u8 kind = BTF_INFO_KIND(t->info); + + return kind == BTF_KIND_STRUCT || kind == BTF_KIND_UNION; +} + static inline u16 btf_type_vlen(const struct btf_type *t) { return BTF_INFO_VLEN(t->info); @@ -141,6 +199,12 @@ static inline const struct btf_member *btf_type_member(const struct btf_type *t) return (const struct btf_member *)(t + 1); } +static inline const struct btf_var_secinfo *btf_type_var_secinfo( + const struct btf_type *t) +{ + return (const struct btf_var_secinfo *)(t + 1); +} + #ifdef CONFIG_BPF_SYSCALL const struct btf_type *btf_type_by_id(const struct btf *btf, u32 type_id); const char *btf_name_by_offset(const struct btf *btf, u32 offset); diff --git a/include/linux/btf_ids.h b/include/linux/btf_ids.h index 4867d549e3c1..57890b357f85 100644 --- a/include/linux/btf_ids.h +++ b/include/linux/btf_ids.h @@ -3,6 +3,11 @@ #ifndef _LINUX_BTF_IDS_H #define _LINUX_BTF_IDS_H +struct btf_id_set { + u32 cnt; + u32 ids[]; +}; + #ifdef CONFIG_DEBUG_INFO_BTF #include <linux/compiler.h> /* for __PASTE */ @@ -62,7 +67,7 @@ asm( \ ".pushsection " BTF_IDS_SECTION ",\"a\"; \n" \ "." #scope " " #name "; \n" \ #name ":; \n" \ -".popsection; \n"); \ +".popsection; \n"); #define BTF_ID_LIST(name) \ __BTF_ID_LIST(name, local) \ @@ -71,6 +76,13 @@ extern u32 name[]; #define BTF_ID_LIST_GLOBAL(name) \ __BTF_ID_LIST(name, globl) +/* The BTF_ID_LIST_SINGLE macro defines a BTF_ID_LIST with + * a single entry. + */ +#define BTF_ID_LIST_SINGLE(name, prefix, typename) \ + BTF_ID_LIST(name) \ + BTF_ID(prefix, typename) + /* * The BTF_ID_UNUSED macro defines 4 zero bytes. * It's used when we want to define 'unused' entry @@ -88,12 +100,57 @@ asm( \ ".zero 4 \n" \ ".popsection; \n"); +/* + * The BTF_SET_START/END macros pair defines sorted list of + * BTF IDs plus its members count, with following layout: + * + * BTF_SET_START(list) + * BTF_ID(type1, name1) + * BTF_ID(type2, name2) + * BTF_SET_END(list) + * + * __BTF_ID__set__list: + * .zero 4 + * list: + * __BTF_ID__type1__name1__3: + * .zero 4 + * __BTF_ID__type2__name2__4: + * .zero 4 + * + */ +#define __BTF_SET_START(name, scope) \ +asm( \ +".pushsection " BTF_IDS_SECTION ",\"a\"; \n" \ +"." #scope " __BTF_ID__set__" #name "; \n" \ +"__BTF_ID__set__" #name ":; \n" \ +".zero 4 \n" \ +".popsection; \n"); + +#define BTF_SET_START(name) \ +__BTF_ID_LIST(name, local) \ +__BTF_SET_START(name, local) + +#define BTF_SET_START_GLOBAL(name) \ +__BTF_ID_LIST(name, globl) \ +__BTF_SET_START(name, globl) + +#define BTF_SET_END(name) \ +asm( \ +".pushsection " BTF_IDS_SECTION ",\"a\"; \n" \ +".size __BTF_ID__set__" #name ", .-" #name " \n" \ +".popsection; \n"); \ +extern struct btf_id_set name; + #else #define BTF_ID_LIST(name) static u32 name[5]; #define BTF_ID(prefix, name) #define BTF_ID_UNUSED #define BTF_ID_LIST_GLOBAL(name) u32 name[1]; +#define BTF_ID_LIST_SINGLE(name, prefix, typename) static u32 name[1]; +#define BTF_SET_START(name) static struct btf_id_set name = { 0 }; +#define BTF_SET_START_GLOBAL(name) static struct btf_id_set name = { 0 }; +#define BTF_SET_END(name) #endif /* CONFIG_DEBUG_INFO_BTF */ diff --git a/include/linux/can/core.h b/include/linux/can/core.h index e20a0cd09ba5..5fb8d0e3f9c1 100644 --- a/include/linux/can/core.h +++ b/include/linux/can/core.h @@ -2,7 +2,7 @@ /* * linux/can/core.h * - * Protoypes and definitions for CAN protocol modules using the PF_CAN core + * Prototypes and definitions for CAN protocol modules using the PF_CAN core * * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> * Urs Thuermann <urs.thuermann@volkswagen.de> @@ -18,13 +18,6 @@ #include <linux/skbuff.h> #include <linux/netdevice.h> -#define CAN_VERSION "20170425" - -/* increment this number each time you change some user-space interface */ -#define CAN_ABI_VERSION "9" - -#define CAN_VERSION_STRING "rev " CAN_VERSION " abi " CAN_ABI_VERSION - #define DNAME(dev) ((dev) ? (dev)->name : "any") /** diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 5e3d45525bd3..41ff31795320 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -82,15 +82,30 @@ struct can_priv { #endif }; +#define CAN_SYNC_SEG 1 + +/* + * can_bit_time() - Duration of one bit + * + * Please refer to ISO 11898-1:2015, section 11.3.1.1 "Bit time" for + * additional information. + * + * Return: the number of time quanta in one bit. + */ +static inline unsigned int can_bit_time(const struct can_bittiming *bt) +{ + return CAN_SYNC_SEG + bt->prop_seg + bt->phase_seg1 + bt->phase_seg2; +} + /* * get_can_dlc(value) - helper macro to cast a given data length code (dlc) - * to __u8 and ensure the dlc value to be max. 8 bytes. + * to u8 and ensure the dlc value to be max. 8 bytes. * * To be used in the CAN netdriver receive path to ensure conformance with * ISO 11898-1 Chapter 8.4.2.3 (DLC field) */ -#define get_can_dlc(i) (min_t(__u8, (i), CAN_MAX_DLC)) -#define get_canfd_dlc(i) (min_t(__u8, (i), CANFD_MAX_DLC)) +#define get_can_dlc(i) (min_t(u8, (i), CAN_MAX_DLC)) +#define get_canfd_dlc(i) (min_t(u8, (i), CANFD_MAX_DLC)) /* Check for outgoing skbs that have not been created by the CAN subsystem */ static inline bool can_skb_headroom_valid(struct net_device *dev, @@ -108,7 +123,7 @@ static inline bool can_skb_headroom_valid(struct net_device *dev, skb->ip_summed = CHECKSUM_UNNECESSARY; - /* preform proper loopback on capable devices */ + /* perform proper loopback on capable devices */ if (dev->flags & IFF_ECHO) skb->pkt_type = PACKET_LOOPBACK; else @@ -201,8 +216,8 @@ void can_bus_off(struct net_device *dev); void can_change_state(struct net_device *dev, struct can_frame *cf, enum can_state tx_state, enum can_state rx_state); -void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, - unsigned int idx); +int can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, + unsigned int idx); struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr); unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx); diff --git a/include/linux/can/rx-offload.h b/include/linux/can/rx-offload.h index 1b78a0cfb615..f1b38088b765 100644 --- a/include/linux/can/rx-offload.h +++ b/include/linux/can/rx-offload.h @@ -35,6 +35,9 @@ int can_rx_offload_add_timestamp(struct net_device *dev, int can_rx_offload_add_fifo(struct net_device *dev, struct can_rx_offload *offload, unsigned int weight); +int can_rx_offload_add_manual(struct net_device *dev, + struct can_rx_offload *offload, + unsigned int weight); int can_rx_offload_irq_offload_timestamp(struct can_rx_offload *offload, u64 reg); int can_rx_offload_irq_offload_fifo(struct can_rx_offload *offload); diff --git a/include/linux/cookie.h b/include/linux/cookie.h new file mode 100644 index 000000000000..0c159f585109 --- /dev/null +++ b/include/linux/cookie.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_COOKIE_H +#define __LINUX_COOKIE_H + +#include <linux/atomic.h> +#include <linux/percpu.h> +#include <asm/local.h> + +struct pcpu_gen_cookie { + local_t nesting; + u64 last; +} __aligned(16); + +struct gen_cookie { + struct pcpu_gen_cookie __percpu *local; + atomic64_t forward_last ____cacheline_aligned_in_smp; + atomic64_t reverse_last; +}; + +#define COOKIE_LOCAL_BATCH 4096 + +#define DEFINE_COOKIE(name) \ + static DEFINE_PER_CPU(struct pcpu_gen_cookie, __##name); \ + static struct gen_cookie name = { \ + .local = &__##name, \ + .forward_last = ATOMIC64_INIT(0), \ + .reverse_last = ATOMIC64_INIT(0), \ + } + +static __always_inline u64 gen_cookie_next(struct gen_cookie *gc) +{ + struct pcpu_gen_cookie *local = this_cpu_ptr(gc->local); + u64 val; + + if (likely(local_inc_return(&local->nesting) == 1)) { + val = local->last; + if (__is_defined(CONFIG_SMP) && + unlikely((val & (COOKIE_LOCAL_BATCH - 1)) == 0)) { + s64 next = atomic64_add_return(COOKIE_LOCAL_BATCH, + &gc->forward_last); + val = next - COOKIE_LOCAL_BATCH; + } + local->last = ++val; + } else { + val = atomic64_dec_return(&gc->reverse_last); + } + local_dec(&local->nesting); + return val; +} + +#endif /* __LINUX_COOKIE_H */ diff --git a/include/linux/dsa/8021q.h b/include/linux/dsa/8021q.h index 311aa04e7520..88cd72dfa4e0 100644 --- a/include/linux/dsa/8021q.h +++ b/include/linux/dsa/8021q.h @@ -5,37 +5,49 @@ #ifndef _NET_DSA_8021Q_H #define _NET_DSA_8021Q_H +#include <linux/refcount.h> #include <linux/types.h> struct dsa_switch; struct sk_buff; struct net_device; struct packet_type; +struct dsa_8021q_context; struct dsa_8021q_crosschip_link { struct list_head list; int port; - struct dsa_switch *other_ds; + struct dsa_8021q_context *other_ctx; int other_port; refcount_t refcount; }; +struct dsa_8021q_ops { + int (*vlan_add)(struct dsa_switch *ds, int port, u16 vid, u16 flags); + int (*vlan_del)(struct dsa_switch *ds, int port, u16 vid); +}; + +struct dsa_8021q_context { + const struct dsa_8021q_ops *ops; + struct dsa_switch *ds; + struct list_head crosschip_links; + /* EtherType of RX VID, used for filtering on master interface */ + __be16 proto; +}; + #define DSA_8021Q_N_SUBVLAN 8 #if IS_ENABLED(CONFIG_NET_DSA_TAG_8021Q) -int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int index, - bool enabled); +int dsa_8021q_setup(struct dsa_8021q_context *ctx, bool enabled); -int dsa_8021q_crosschip_bridge_join(struct dsa_switch *ds, int port, - struct dsa_switch *other_ds, - int other_port, - struct list_head *crosschip_links); +int dsa_8021q_crosschip_bridge_join(struct dsa_8021q_context *ctx, int port, + struct dsa_8021q_context *other_ctx, + int other_port); -int dsa_8021q_crosschip_bridge_leave(struct dsa_switch *ds, int port, - struct dsa_switch *other_ds, - int other_port, - struct list_head *crosschip_links); +int dsa_8021q_crosschip_bridge_leave(struct dsa_8021q_context *ctx, int port, + struct dsa_8021q_context *other_ctx, + int other_port); struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev, u16 tpid, u16 tci); @@ -56,24 +68,21 @@ bool vid_is_dsa_8021q(u16 vid); #else -int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int index, - bool enabled) +int dsa_8021q_setup(struct dsa_8021q_context *ctx, bool enabled) { return 0; } -int dsa_8021q_crosschip_bridge_join(struct dsa_switch *ds, int port, - struct dsa_switch *other_ds, - int other_port, - struct list_head *crosschip_links) +int dsa_8021q_crosschip_bridge_join(struct dsa_8021q_context *ctx, int port, + struct dsa_8021q_context *other_ctx, + int other_port) { return 0; } -int dsa_8021q_crosschip_bridge_leave(struct dsa_switch *ds, int port, - struct dsa_switch *other_ds, - int other_port, - struct list_head *crosschip_links) +int dsa_8021q_crosschip_bridge_leave(struct dsa_8021q_context *ctx, int port, + struct dsa_8021q_context *other_ctx, + int other_port) { return 0; } diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 969a80211df6..6408b446051f 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -241,6 +241,27 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \ ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL) +#define ETHTOOL_STAT_NOT_SET (~0ULL) + +/** + * struct ethtool_pause_stats - statistics for IEEE 802.3x pause frames + * @tx_pause_frames: transmitted pause frame count. Reported to user space + * as %ETHTOOL_A_PAUSE_STAT_TX_FRAMES. + * + * Equivalent to `30.3.4.2 aPAUSEMACCtrlFramesTransmitted` + * from the standard. + * + * @rx_pause_frames: received pause frame count. Reported to user space + * as %ETHTOOL_A_PAUSE_STAT_RX_FRAMES. Equivalent to: + * + * Equivalent to `30.3.4.3 aPAUSEMACCtrlFramesReceived` + * from the standard. + */ +struct ethtool_pause_stats { + u64 tx_pause_frames; + u64 rx_pause_frames; +}; + /** * struct ethtool_ops - optional netdev operations * @supported_coalesce_params: supported types of interrupt coalescing. @@ -282,6 +303,9 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, * Returns a negative error code or zero. * @get_ringparam: Report ring sizes * @set_ringparam: Set ring sizes. Returns a negative error code or zero. + * @get_pause_stats: Report pause frame statistics. Drivers must not zero + * statistics which they don't report. The stats structure is initialized + * to ETHTOOL_STAT_NOT_SET indicating driver does not report statistics. * @get_pauseparam: Report pause parameters * @set_pauseparam: Set pause parameters. Returns a negative error code * or zero. @@ -418,6 +442,8 @@ struct ethtool_ops { struct ethtool_ringparam *); int (*set_ringparam)(struct net_device *, struct ethtool_ringparam *); + void (*get_pause_stats)(struct net_device *dev, + struct ethtool_pause_stats *pause_stats); void (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*); int (*set_pauseparam)(struct net_device *, @@ -479,6 +505,10 @@ struct ethtool_ops { struct ethtool_fecparam *); void (*get_ethtool_phy_stats)(struct net_device *, struct ethtool_stats *, u64 *); + int (*get_phy_tunable)(struct net_device *, + const struct ethtool_tunable *, void *); + int (*set_phy_tunable)(struct net_device *, + const struct ethtool_tunable *, const void *); }; int ethtool_check_ops(const struct ethtool_ops *ops); diff --git a/include/linux/filter.h b/include/linux/filter.h index ebfb7cfb65f1..20fc24c9779a 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -1236,13 +1236,17 @@ struct bpf_sock_addr_kern { struct bpf_sock_ops_kern { struct sock *sk; - u32 op; union { u32 args[4]; u32 reply; u32 replylong[4]; }; - u32 is_fullsock; + struct sk_buff *syn_skb; + struct sk_buff *skb; + void *skb_data_end; + u8 op; + u8 is_fullsock; + u8 remaining_opt_len; u64 temp; /* temp and everything after is not * initialized to 0 before calling * the BPF program. New fields that @@ -1283,6 +1287,8 @@ int copy_bpf_fprog_from_user(struct sock_fprog *dst, sockptr_t src, int len); struct bpf_sk_lookup_kern { u16 family; u16 protocol; + __be16 sport; + u16 dport; struct { __be32 saddr; __be32 daddr; @@ -1291,8 +1297,6 @@ struct bpf_sk_lookup_kern { const struct in6_addr *saddr; const struct in6_addr *daddr; } v6; - __be16 sport; - u16 dport; struct sock *selected_sk; bool no_reuseport; }; diff --git a/include/linux/fsl/ptp_qoriq.h b/include/linux/fsl/ptp_qoriq.h index 884b8f8ca06d..01acebe37fab 100644 --- a/include/linux/fsl/ptp_qoriq.h +++ b/include/linux/fsl/ptp_qoriq.h @@ -136,6 +136,7 @@ struct ptp_qoriq_registers { #define DEFAULT_TMR_PRSC 2 #define DEFAULT_FIPER1_PERIOD 1000000000 #define DEFAULT_FIPER2_PERIOD 1000000000 +#define DEFAULT_FIPER3_PERIOD 1000000000 struct ptp_qoriq { void __iomem *base; @@ -147,6 +148,7 @@ struct ptp_qoriq { struct dentry *debugfs_root; struct device *dev; bool extts_fifo_support; + bool fiper3_support; int irq; int phc_index; u32 tclk_period; /* nanoseconds */ @@ -155,6 +157,7 @@ struct ptp_qoriq { u32 cksel; u32 tmr_fiper1; u32 tmr_fiper2; + u32 tmr_fiper3; u32 (*read)(unsigned __iomem *addr); void (*write)(unsigned __iomem *addr, u32 val); }; diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index c47f43e65a2f..770408b2fdaf 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -151,6 +151,9 @@ #define IEEE80211_ANO_NETTYPE_WILD 15 +/* bits unique to S1G beacon */ +#define IEEE80211_S1G_BCN_NEXT_TBTT 0x100 + /* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */ #define IEEE80211_CTL_EXT_POLL 0x2000 #define IEEE80211_CTL_EXT_SPR 0x3000 @@ -554,6 +557,28 @@ static inline bool ieee80211_is_s1g_beacon(__le16 fc) } /** + * ieee80211_next_tbtt_present - check if IEEE80211_FTYPE_EXT && + * IEEE80211_STYPE_S1G_BEACON && IEEE80211_S1G_BCN_NEXT_TBTT + * @fc: frame control bytes in little-endian byteorder + */ +static inline bool ieee80211_next_tbtt_present(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON) && + fc & cpu_to_le16(IEEE80211_S1G_BCN_NEXT_TBTT); +} + +/** + * ieee80211_is_s1g_short_beacon - check if next tbtt present bit is set. Only + * true for S1G beacons when they're short. + * @fc: frame control bytes in little-endian byteorder + */ +static inline bool ieee80211_is_s1g_short_beacon(__le16 fc) +{ + return ieee80211_is_s1g_beacon(fc) && ieee80211_next_tbtt_present(fc); +} + +/** * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM * @fc: frame control bytes in little-endian byteorder */ @@ -962,6 +987,25 @@ enum ieee80211_vht_opmode_bits { IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80, }; +/** + * enum ieee80211_s1g_chanwidth + * These are defined in IEEE802.11-2016ah Table 10-20 + * as BSS Channel Width + * + * @IEEE80211_S1G_CHANWIDTH_1MHZ: 1MHz operating channel + * @IEEE80211_S1G_CHANWIDTH_2MHZ: 2MHz operating channel + * @IEEE80211_S1G_CHANWIDTH_4MHZ: 4MHz operating channel + * @IEEE80211_S1G_CHANWIDTH_8MHZ: 8MHz operating channel + * @IEEE80211_S1G_CHANWIDTH_16MHZ: 16MHz operating channel + */ +enum ieee80211_s1g_chanwidth { + IEEE80211_S1G_CHANWIDTH_1MHZ = 0, + IEEE80211_S1G_CHANWIDTH_2MHZ = 1, + IEEE80211_S1G_CHANWIDTH_4MHZ = 3, + IEEE80211_S1G_CHANWIDTH_8MHZ = 7, + IEEE80211_S1G_CHANWIDTH_16MHZ = 15, +}; + #define WLAN_SA_QUERY_TR_ID_LEN 2 #define WLAN_MEMBERSHIP_LEN 8 #define WLAN_USER_POSITION_LEN 16 @@ -1034,6 +1078,13 @@ struct ieee80211_ext { u8 change_seq; u8 variable[0]; } __packed s1g_beacon; + struct { + u8 sa[ETH_ALEN]; + __le32 timestamp; + u8 change_seq; + u8 next_tbtt[3]; + u8 variable[0]; + } __packed s1g_short_beacon; } u; } __packed __aligned(2); @@ -1070,6 +1121,11 @@ struct ieee80211_mgmt { } __packed assoc_resp, reassoc_resp; struct { __le16 capab_info; + __le16 status_code; + u8 variable[0]; + } __packed s1g_assoc_resp, s1g_reassoc_resp; + struct { + __le16 capab_info; __le16 listen_interval; u8 current_ap[ETH_ALEN]; /* followed by SSID and Supported rates */ @@ -2294,8 +2350,11 @@ ieee80211_he_6ghz_oper(const struct ieee80211_he_operation *he_oper) } /* HE Spatial Reuse defines */ -#define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT 0x4 -#define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT 0x8 +#define IEEE80211_HE_SPR_PSR_DISALLOWED BIT(0) +#define IEEE80211_HE_SPR_NON_SRG_OBSS_PD_SR_DISALLOWED BIT(1) +#define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT BIT(2) +#define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT BIT(3) +#define IEEE80211_HE_SPR_HESIGA_SR_VAL15_ALLOWED BIT(4) /* * ieee80211_he_spr_size - calculate 802.11ax HE Spatial Reuse IE size @@ -2330,84 +2389,93 @@ ieee80211_he_spr_size(const u8 *he_spr_ie) } /* S1G Capabilities Information field */ -#define S1G_CAPAB_B0_S1G_LONG BIT(0) -#define S1G_CAPAB_B0_SGI_1MHZ BIT(1) -#define S1G_CAPAB_B0_SGI_2MHZ BIT(2) -#define S1G_CAPAB_B0_SGI_4MHZ BIT(3) -#define S1G_CAPAB_B0_SGI_8MHZ BIT(4) -#define S1G_CAPAB_B0_SGI_16MHZ BIT(5) -#define S1G_CAPAB_B0_SUPP_CH_WIDTH_MASK (BIT(6) | BIT(7)) -#define S1G_CAPAB_B0_SUPP_CH_WIDTH_SHIFT 6 - -#define S1G_CAPAB_B1_RX_LDPC BIT(0) -#define S1G_CAPAB_B1_TX_STBC BIT(1) -#define S1G_CAPAB_B1_RX_STBC BIT(2) -#define S1G_CAPAB_B1_SU_BFER BIT(3) -#define S1G_CAPAB_B1_SU_BFEE BIT(4) -#define S1G_CAPAB_B1_BFEE_STS_MASK (BIT(5) | BIT(6) | BIT(7)) -#define S1G_CAPAB_B1_BFEE_STS_SHIFT 5 - -#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_MASK (BIT(0) | BIT(1) | BIT(2)) -#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_SHIFT 0 -#define S1G_CAPAB_B2_MU_BFER BIT(3) -#define S1G_CAPAB_B2_MU_BFEE BIT(4) -#define S1G_CAPAB_B2_PLUS_HTC_VHT BIT(5) -#define S1G_CAPAB_B2_TRAVELING_PILOT_MASK (BIT(6) | BIT(7)) -#define S1G_CAPAB_B2_TRAVELING_PILOT_SHIFT 6 - -#define S1G_CAPAB_B3_RD_RESPONDER BIT(0) -#define S1G_CAPAB_B3_HT_DELAYED_BA BIT(1) -#define S1G_CAPAB_B3_MAX_MPDU_LEN BIT(2) -#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_MASK (BIT(3) | BIT(4)) -#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_SHIFT 3 -#define S1G_CAPAB_B3_MIN_MPDU_START_MASK (BIT(5) | BIT(6) | BIT(7)) -#define S1G_CAPAB_B3_MIN_MPDU_START_SHIFT 5 - -#define S1G_CAPAB_B4_UPLINK_SYNC BIT(0) -#define S1G_CAPAB_B4_DYNAMIC_AID BIT(1) -#define S1G_CAPAB_B4_BAT BIT(2) -#define S1G_CAPAB_B4_TIME_ADE BIT(3) -#define S1G_CAPAB_B4_NON_TIM BIT(4) -#define S1G_CAPAB_B4_GROUP_AID BIT(5) -#define S1G_CAPAB_B4_STA_TYPE_MASK (BIT(6) | BIT(7)) -#define S1G_CAPAB_B4_STA_TYPE_SHIFT 6 - -#define S1G_CAPAB_B5_CENT_AUTH_CONTROL BIT(0) -#define S1G_CAPAB_B5_DIST_AUTH_CONTROL BIT(1) -#define S1G_CAPAB_B5_AMSDU BIT(2) -#define S1G_CAPAB_B5_AMPDU BIT(3) -#define S1G_CAPAB_B5_ASYMMETRIC_BA BIT(4) -#define S1G_CAPAB_B5_FLOW_CONTROL BIT(5) -#define S1G_CAPAB_B5_SECTORIZED_BEAM_MASK (BIT(6) | BIT(7)) -#define S1G_CAPAB_B5_SECTORIZED_BEAM_SHIFT 6 - -#define S1G_CAPAB_B6_OBSS_MITIGATION BIT(0) -#define S1G_CAPAB_B6_FRAGMENT_BA BIT(1) -#define S1G_CAPAB_B6_NDP_PS_POLL BIT(2) -#define S1G_CAPAB_B6_RAW_OPERATION BIT(3) -#define S1G_CAPAB_B6_PAGE_SLICING BIT(4) -#define S1G_CAPAB_B6_TXOP_SHARING_IMP_ACK BIT(5) -#define S1G_CAPAB_B6_VHT_LINK_ADAPT_MASK (BIT(6) | BIT(7)) -#define S1G_CAPAB_B6_VHT_LINK_ADAPT_SHIFT 6 - -#define S1G_CAPAB_B7_TACK_AS_PS_POLL BIT(0) -#define S1G_CAPAB_B7_DUP_1MHZ BIT(1) -#define S1G_CAPAB_B7_MCS_NEGOTIATION BIT(2) -#define S1G_CAPAB_B7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3) -#define S1G_CAPAB_B7_NDP_BFING_REPORT_POLL BIT(4) -#define S1G_CAPAB_B7_UNSOLICITED_DYN_AID BIT(5) -#define S1G_CAPAB_B7_SECTOR_TRAINING_OPERATION BIT(6) -#define S1G_CAPAB_B7_TEMP_PS_MODE_SWITCH BIT(7) - -#define S1G_CAPAB_B8_TWT_GROUPING BIT(0) -#define S1G_CAPAB_B8_BDT BIT(1) -#define S1G_CAPAB_B8_COLOR_MASK (BIT(2) | BIT(3) | BIT(4)) -#define S1G_CAPAB_B8_COLOR_SHIFT 2 -#define S1G_CAPAB_B8_TWT_REQUEST BIT(5) -#define S1G_CAPAB_B8_TWT_RESPOND BIT(6) -#define S1G_CAPAB_B8_PV1_FRAME BIT(7) - -#define S1G_CAPAB_B9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0) +#define IEEE80211_S1G_CAPABILITY_LEN 15 + +#define S1G_CAP0_S1G_LONG BIT(0) +#define S1G_CAP0_SGI_1MHZ BIT(1) +#define S1G_CAP0_SGI_2MHZ BIT(2) +#define S1G_CAP0_SGI_4MHZ BIT(3) +#define S1G_CAP0_SGI_8MHZ BIT(4) +#define S1G_CAP0_SGI_16MHZ BIT(5) +#define S1G_CAP0_SUPP_CH_WIDTH GENMASK(7, 6) + +#define S1G_SUPP_CH_WIDTH_2 0 +#define S1G_SUPP_CH_WIDTH_4 1 +#define S1G_SUPP_CH_WIDTH_8 2 +#define S1G_SUPP_CH_WIDTH_16 3 +#define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << FIELD_GET(S1G_CAP0_SUPP_CH_WIDTH, \ + cap[0])) << 1) + +#define S1G_CAP1_RX_LDPC BIT(0) +#define S1G_CAP1_TX_STBC BIT(1) +#define S1G_CAP1_RX_STBC BIT(2) +#define S1G_CAP1_SU_BFER BIT(3) +#define S1G_CAP1_SU_BFEE BIT(4) +#define S1G_CAP1_BFEE_STS GENMASK(7, 5) + +#define S1G_CAP2_SOUNDING_DIMENSIONS GENMASK(2, 0) +#define S1G_CAP2_MU_BFER BIT(3) +#define S1G_CAP2_MU_BFEE BIT(4) +#define S1G_CAP2_PLUS_HTC_VHT BIT(5) +#define S1G_CAP2_TRAVELING_PILOT GENMASK(7, 6) + +#define S1G_CAP3_RD_RESPONDER BIT(0) +#define S1G_CAP3_HT_DELAYED_BA BIT(1) +#define S1G_CAP3_MAX_MPDU_LEN BIT(2) +#define S1G_CAP3_MAX_AMPDU_LEN_EXP GENMASK(4, 3) +#define S1G_CAP3_MIN_MPDU_START GENMASK(7, 5) + +#define S1G_CAP4_UPLINK_SYNC BIT(0) +#define S1G_CAP4_DYNAMIC_AID BIT(1) +#define S1G_CAP4_BAT BIT(2) +#define S1G_CAP4_TIME_ADE BIT(3) +#define S1G_CAP4_NON_TIM BIT(4) +#define S1G_CAP4_GROUP_AID BIT(5) +#define S1G_CAP4_STA_TYPE GENMASK(7, 6) + +#define S1G_CAP5_CENT_AUTH_CONTROL BIT(0) +#define S1G_CAP5_DIST_AUTH_CONTROL BIT(1) +#define S1G_CAP5_AMSDU BIT(2) +#define S1G_CAP5_AMPDU BIT(3) +#define S1G_CAP5_ASYMMETRIC_BA BIT(4) +#define S1G_CAP5_FLOW_CONTROL BIT(5) +#define S1G_CAP5_SECTORIZED_BEAM GENMASK(7, 6) + +#define S1G_CAP6_OBSS_MITIGATION BIT(0) +#define S1G_CAP6_FRAGMENT_BA BIT(1) +#define S1G_CAP6_NDP_PS_POLL BIT(2) +#define S1G_CAP6_RAW_OPERATION BIT(3) +#define S1G_CAP6_PAGE_SLICING BIT(4) +#define S1G_CAP6_TXOP_SHARING_IMP_ACK BIT(5) +#define S1G_CAP6_VHT_LINK_ADAPT GENMASK(7, 6) + +#define S1G_CAP7_TACK_AS_PS_POLL BIT(0) +#define S1G_CAP7_DUP_1MHZ BIT(1) +#define S1G_CAP7_MCS_NEGOTIATION BIT(2) +#define S1G_CAP7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3) +#define S1G_CAP7_NDP_BFING_REPORT_POLL BIT(4) +#define S1G_CAP7_UNSOLICITED_DYN_AID BIT(5) +#define S1G_CAP7_SECTOR_TRAINING_OPERATION BIT(6) +#define S1G_CAP7_TEMP_PS_MODE_SWITCH BIT(7) + +#define S1G_CAP8_TWT_GROUPING BIT(0) +#define S1G_CAP8_BDT BIT(1) +#define S1G_CAP8_COLOR GENMASK(4, 2) +#define S1G_CAP8_TWT_REQUEST BIT(5) +#define S1G_CAP8_TWT_RESPOND BIT(6) +#define S1G_CAP8_PV1_FRAME BIT(7) + +#define S1G_CAP9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0) + +#define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ BIT(0) +#define S1G_OPER_CH_WIDTH_OPER GENMASK(4, 1) + + +#define LISTEN_INT_USF GENMASK(15, 14) +#define LISTEN_INT_UI GENMASK(13, 0) + +#define IEEE80211_MAX_USF FIELD_MAX(LISTEN_INT_USF) +#define IEEE80211_MAX_UI FIELD_MAX(LISTEN_INT_UI) /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 @@ -2808,6 +2876,8 @@ enum ieee80211_eid { WLAN_EID_REDUCED_NEIGHBOR_REPORT = 201, + WLAN_EID_AID_REQUEST = 210, + WLAN_EID_AID_RESPONSE = 211, WLAN_EID_S1G_BCN_COMPAT = 213, WLAN_EID_S1G_SHORT_BCN_INTERVAL = 214, WLAN_EID_S1G_CAPABILITIES = 217, diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index 6479a38e52fa..556caed00258 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -19,7 +19,13 @@ struct br_ip { #if IS_ENABLED(CONFIG_IPV6) struct in6_addr ip6; #endif - } u; + } src; + union { + __be32 ip4; +#if IS_ENABLED(CONFIG_IPV6) + struct in6_addr ip6; +#endif + } dst; __be16 proto; __u16 vid; }; diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 5bda8cf457b6..2a7660843444 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -27,9 +27,18 @@ struct tun_xdp_hdr { #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE) struct socket *tun_get_socket(struct file *); struct ptr_ring *tun_get_tx_ring(struct file *file); -bool tun_is_xdp_frame(void *ptr); -void *tun_xdp_to_ptr(void *ptr); -void *tun_ptr_to_xdp(void *ptr); +static inline bool tun_is_xdp_frame(void *ptr) +{ + return (unsigned long)ptr & TUN_XDP_FLAG; +} +static inline void *tun_xdp_to_ptr(struct xdp_frame *xdp) +{ + return (void *)((unsigned long)xdp | TUN_XDP_FLAG); +} +static inline struct xdp_frame *tun_ptr_to_xdp(void *ptr) +{ + return (void *)((unsigned long)ptr & ~TUN_XDP_FLAG); +} void tun_ptr_free(void *ptr); #else #include <linux/err.h> @@ -48,11 +57,11 @@ static inline bool tun_is_xdp_frame(void *ptr) { return false; } -static inline void *tun_xdp_to_ptr(void *ptr) +static inline void *tun_xdp_to_ptr(struct xdp_frame *xdp) { return NULL; } -static inline void *tun_ptr_to_xdp(void *ptr) +static inline struct xdp_frame *tun_ptr_to_xdp(void *ptr) { return NULL; } diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index 0ef2d800fda7..84abb30a3fbb 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -75,6 +75,8 @@ static inline size_t inet_diag_msg_attrs_size(void) #ifdef CONFIG_SOCK_CGROUP_DATA + nla_total_size_64bit(sizeof(u64)) /* INET_DIAG_CGROUP_ID */ #endif + + nla_total_size(sizeof(struct inet_diag_sockopt)) + /* INET_DIAG_SOCKOPT */ ; } int inet_diag_msg_attrs_fill(struct sock *sk, struct sk_buff *skb, diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index a44789d027cc..dda61d150a13 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -177,17 +177,6 @@ static inline int inet6_sdif(const struct sk_buff *skb) return 0; } -/* can not be used in TCP layer after tcp_v6_fill_cb */ -static inline bool inet6_exact_dif_match(struct net *net, struct sk_buff *skb) -{ -#if defined(CONFIG_NET_L3_MASTER_DEV) - if (!net->ipv4.sysctl_tcp_l3mdev_accept && - skb && ipv6_l3mdev_skb(IP6CB(skb)->flags)) - return true; -#endif - return false; -} - struct tcp6_request_sock { struct tcp_request_sock tcp6rsk_tcp; }; @@ -345,17 +334,6 @@ static inline struct raw6_sock *raw6_sk(const struct sock *sk) return (struct raw6_sock *)sk; } -static inline void inet_sk_copy_descendant(struct sock *sk_to, - const struct sock *sk_from) -{ - int ancestor_size = sizeof(struct inet_sock); - - if (sk_from->sk_family == PF_INET6) - ancestor_size += sizeof(struct ipv6_pinfo); - - __inet_sk_copy_descendant(sk_to, sk_from, ancestor_size); -} - #define __ipv6_only_sock(sk) (sk->sk_ipv6only) #define ipv6_only_sock(sk) (__ipv6_only_sock(sk)) #define ipv6_sk_rxinfo(sk) ((sk)->sk_family == PF_INET6 && \ diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 898cbf00332a..dbd69b3d170b 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -306,7 +306,7 @@ static inline u32 linkmode_adv_to_mii_10gbt_adv_t(unsigned long *advertising) /** * mii_10gbt_stat_mod_linkmode_lpa_t * @advertising: target the linkmode advertisement settings - * @adv: value of the C45 10GBASE-T AN STATUS register + * @lpa: value of the C45 10GBASE-T AN STATUS register * * A small helper function that translates C45 10GBASE-T AN STATUS register bits * to linkmode advertisement settings. Other bits in advertising aren't changed. @@ -358,6 +358,12 @@ static inline int mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad, return mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum)); } +static inline int mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad, + u16 regnum, u16 val) +{ + return mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum), val); +} + int mdiobus_register_device(struct mdio_device *mdiodev); int mdiobus_unregister_device(struct mdio_device *mdiodev); bool mdiobus_is_registered_device(struct mii_bus *bus, int addr); @@ -365,6 +371,7 @@ struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr); /** * mdio_module_driver() - Helper macro for registering mdio drivers + * @_mdio_driver: driver to register * * Helper macro for MDIO drivers which do not do anything special in module * init/exit. Each module may only use this macro once, and calling it diff --git a/include/linux/mdio/mdio-i2c.h b/include/linux/mdio/mdio-i2c.h new file mode 100644 index 000000000000..b1d27f7cd23f --- /dev/null +++ b/include/linux/mdio/mdio-i2c.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * MDIO I2C bridge + * + * Copyright (C) 2015 Russell King + */ +#ifndef MDIO_I2C_H +#define MDIO_I2C_H + +struct device; +struct i2c_adapter; +struct mii_bus; + +struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c); + +#endif diff --git a/include/linux/mdio/mdio-xgene.h b/include/linux/mdio/mdio-xgene.h new file mode 100644 index 000000000000..8af93ada8b64 --- /dev/null +++ b/include/linux/mdio/mdio-xgene.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* Applied Micro X-Gene SoC MDIO Driver + * + * Copyright (c) 2016, Applied Micro Circuits Corporation + * Author: Iyappan Subramanian <isubramanian@apm.com> + */ + +#ifndef __MDIO_XGENE_H__ +#define __MDIO_XGENE_H__ + +#define BLOCK_XG_MDIO_CSR_OFFSET 0x5000 +#define BLOCK_DIAG_CSR_OFFSET 0xd000 +#define XGENET_CONFIG_REG_ADDR 0x20 + +#define MAC_ADDR_REG_OFFSET 0x00 +#define MAC_COMMAND_REG_OFFSET 0x04 +#define MAC_WRITE_REG_OFFSET 0x08 +#define MAC_READ_REG_OFFSET 0x0c +#define MAC_COMMAND_DONE_REG_OFFSET 0x10 + +#define CLKEN_OFFSET 0x08 +#define SRST_OFFSET 0x00 + +#define MENET_CFG_MEM_RAM_SHUTDOWN_ADDR 0x70 +#define MENET_BLOCK_MEM_RDY_ADDR 0x74 + +#define MAC_CONFIG_1_ADDR 0x00 +#define MII_MGMT_COMMAND_ADDR 0x24 +#define MII_MGMT_ADDRESS_ADDR 0x28 +#define MII_MGMT_CONTROL_ADDR 0x2c +#define MII_MGMT_STATUS_ADDR 0x30 +#define MII_MGMT_INDICATORS_ADDR 0x34 +#define SOFT_RESET BIT(31) + +#define MII_MGMT_CONFIG_ADDR 0x20 +#define MII_MGMT_COMMAND_ADDR 0x24 +#define MII_MGMT_ADDRESS_ADDR 0x28 +#define MII_MGMT_CONTROL_ADDR 0x2c +#define MII_MGMT_STATUS_ADDR 0x30 +#define MII_MGMT_INDICATORS_ADDR 0x34 + +#define MIIM_COMMAND_ADDR 0x20 +#define MIIM_FIELD_ADDR 0x24 +#define MIIM_CONFIGURATION_ADDR 0x28 +#define MIIM_LINKFAILVECTOR_ADDR 0x2c +#define MIIM_INDICATOR_ADDR 0x30 +#define MIIMRD_FIELD_ADDR 0x34 + +#define MDIO_CSR_OFFSET 0x5000 + +#define REG_ADDR_POS 0 +#define REG_ADDR_LEN 5 +#define PHY_ADDR_POS 8 +#define PHY_ADDR_LEN 5 + +#define HSTMIIMWRDAT_POS 0 +#define HSTMIIMWRDAT_LEN 16 +#define HSTPHYADX_POS 23 +#define HSTPHYADX_LEN 5 +#define HSTREGADX_POS 18 +#define HSTREGADX_LEN 5 +#define HSTLDCMD BIT(3) +#define HSTMIIMCMD_POS 0 +#define HSTMIIMCMD_LEN 3 + +#define BUSY_MASK BIT(0) +#define READ_CYCLE_MASK BIT(0) + +enum xgene_enet_cmd { + XGENE_ENET_WR_CMD = BIT(31), + XGENE_ENET_RD_CMD = BIT(30) +}; + +enum { + MIIM_CMD_IDLE, + MIIM_CMD_LEGACY_WRITE, + MIIM_CMD_LEGACY_READ, +}; + +enum xgene_mdio_id { + XGENE_MDIO_RGMII = 1, + XGENE_MDIO_XFI +}; + +struct xgene_mdio_pdata { + struct clk *clk; + struct device *dev; + void __iomem *mac_csr_addr; + void __iomem *diag_csr_addr; + void __iomem *mdio_csr_addr; + struct mii_bus *mdio_bus; + int mdio_id; + spinlock_t mac_lock; /* mac lock */ +}; + +/* Set the specified value into a bit-field defined by its starting position + * and length within a single u64. + */ +static inline u64 xgene_enet_set_field_value(int pos, int len, u64 val) +{ + return (val & ((1ULL << len) - 1)) << pos; +} + +#define SET_VAL(field, val) \ + xgene_enet_set_field_value(field ## _POS, field ## _LEN, val) + +#define SET_BIT(field) \ + xgene_enet_set_field_value(field ## _POS, 1, 1) + +/* Get the value from a bit-field defined by its starting position + * and length within the specified u64. + */ +static inline u64 xgene_enet_get_field_value(int pos, int len, u64 src) +{ + return (src >> pos) & ((1ULL << len) - 1); +} + +#define GET_VAL(field, src) \ + xgene_enet_get_field_value(field ## _POS, field ## _LEN, src) + +#define GET_BIT(field, src) \ + xgene_enet_get_field_value(field ## _POS, 1, src) + +u32 xgene_mdio_rd_mac(struct xgene_mdio_pdata *pdata, u32 rd_addr); +void xgene_mdio_wr_mac(struct xgene_mdio_pdata *pdata, u32 wr_addr, u32 data); +int xgene_mdio_rgmii_read(struct mii_bus *bus, int phy_id, int reg); +int xgene_mdio_rgmii_write(struct mii_bus *bus, int phy_id, int reg, u16 data); +struct phy_device *xgene_enet_phy_register(struct mii_bus *bus, int phy_addr); + +#endif /* __MDIO_XGENE_H__ */ diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 75f880c25bb8..416ee6dd2574 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -27,6 +27,7 @@ #define PHY_ID_KSZ8061 0x00221570 #define PHY_ID_KSZ9031 0x00221620 #define PHY_ID_KSZ9131 0x00221640 +#define PHY_ID_LAN8814 0x00221660 #define PHY_ID_KSZ886X 0x00221430 #define PHY_ID_KSZ8863 0x00221435 diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index 4d3376e20f5e..cf824366a7d1 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -366,6 +366,7 @@ enum { enum { MLX5_GENERAL_SUBTYPE_DELAY_DROP_TIMEOUT = 0x1, MLX5_GENERAL_SUBTYPE_PCI_POWER_CHANGE_EVENT = 0x5, + MLX5_GENERAL_SUBTYPE_FW_LIVE_PATCH_EVENT = 0x7, MLX5_GENERAL_SUBTYPE_PCI_SYNC_FOR_FW_UPDATE_EVENT = 0x8, }; @@ -816,7 +817,7 @@ struct mlx5_mini_cqe8 { __be32 rx_hash_result; struct { __be16 checksum; - __be16 rsvd; + __be16 stridx; }; struct { __be16 wqe_counter; @@ -836,6 +837,7 @@ enum { enum { MLX5_CQE_FORMAT_CSUM = 0x1, + MLX5_CQE_FORMAT_CSUM_STRIDX = 0x3, }; #define MLX5_MINI_CQE_ARRAY_SIZE 8 diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 372100c755e7..add85094f9a5 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -501,6 +501,7 @@ struct mlx5_mpfs; struct mlx5_eswitch; struct mlx5_lag; struct mlx5_devcom; +struct mlx5_fw_reset; struct mlx5_eq_table; struct mlx5_irq_table; @@ -578,6 +579,7 @@ struct mlx5_priv { struct mlx5_core_sriov sriov; struct mlx5_lag *lag; struct mlx5_devcom *devcom; + struct mlx5_fw_reset *fw_reset; struct mlx5_core_roce roce; struct mlx5_fc_stats fc_stats; struct mlx5_rl_table rl_table; @@ -643,7 +645,6 @@ struct mlx5_pps { }; struct mlx5_clock { - struct mlx5_core_dev *mdev; struct mlx5_nb pps_nb; seqlock_t lock; struct cyclecounter cycles; diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h index c16827eeba9c..b0ae8020f13e 100644 --- a/include/linux/mlx5/eswitch.h +++ b/include/linux/mlx5/eswitch.h @@ -74,15 +74,16 @@ bool mlx5_eswitch_reg_c1_loopback_enabled(const struct mlx5_eswitch *esw); bool mlx5_eswitch_vport_match_metadata_enabled(const struct mlx5_eswitch *esw); /* Reg C0 usage: - * Reg C0 = < ESW_VHCA_ID_BITS(8) | ESW_VPORT BITS(8) | ESW_CHAIN_TAG(16) > + * Reg C0 = < ESW_PFNUM_BITS(4) | ESW_VPORT BITS(12) | ESW_CHAIN_TAG(16) > * - * Highest 8 bits of the reg c0 is the vhca_id, next 8 bits is vport_num, - * the rest (lowest 16 bits) is left for tc chain tag restoration. - * VHCA_ID + VPORT comprise the SOURCE_PORT matching. + * Highest 4 bits of the reg c0 is the PF_NUM (range 0-15), 12 bits of + * unique non-zero vport id (range 1-4095). The rest (lowest 16 bits) is left + * for tc chain tag restoration. + * PFNUM + VPORT comprise the SOURCE_PORT matching. */ -#define ESW_VHCA_ID_BITS 8 -#define ESW_VPORT_BITS 8 -#define ESW_SOURCE_PORT_METADATA_BITS (ESW_VHCA_ID_BITS + ESW_VPORT_BITS) +#define ESW_VPORT_BITS 12 +#define ESW_PFNUM_BITS 4 +#define ESW_SOURCE_PORT_METADATA_BITS (ESW_PFNUM_BITS + ESW_VPORT_BITS) #define ESW_SOURCE_PORT_METADATA_OFFSET (32 - ESW_SOURCE_PORT_METADATA_BITS) #define ESW_CHAIN_TAG_METADATA_BITS (32 - ESW_SOURCE_PORT_METADATA_BITS) #define ESW_CHAIN_TAG_METADATA_MASK GENMASK(ESW_CHAIN_TAG_METADATA_BITS - 1,\ diff --git a/include/linux/mlx5/fs.h b/include/linux/mlx5/fs.h index 92d991d93757..846d94ad04bc 100644 --- a/include/linux/mlx5/fs.h +++ b/include/linux/mlx5/fs.h @@ -76,6 +76,7 @@ enum mlx5_flow_namespace_type { MLX5_FLOW_NAMESPACE_SNIFFER_RX, MLX5_FLOW_NAMESPACE_SNIFFER_TX, MLX5_FLOW_NAMESPACE_EGRESS, + MLX5_FLOW_NAMESPACE_EGRESS_KERNEL, MLX5_FLOW_NAMESPACE_RDMA_RX, MLX5_FLOW_NAMESPACE_RDMA_RX_KERNEL, MLX5_FLOW_NAMESPACE_RDMA_TX, diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h index 36492a1342cf..d75ef8aa8fac 100644 --- a/include/linux/mlx5/qp.h +++ b/include/linux/mlx5/qp.h @@ -245,6 +245,10 @@ enum { MLX5_ETH_WQE_SWP_OUTER_L4_UDP = 1 << 5, }; +enum { + MLX5_ETH_WQE_FT_META_IPSEC = BIT(0), +}; + struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; u8 swp_outer_l3_offset; @@ -253,7 +257,7 @@ struct mlx5_wqe_eth_seg { u8 cs_flags; u8 swp_flags; __be16 mss; - __be32 rsvd2; + __be32 flow_table_metadata; union { struct { __be16 sz; diff --git a/include/linux/net.h b/include/linux/net.h index ae713c851342..0dcd51feef02 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -42,6 +42,8 @@ struct net; #define SOCK_PASSCRED 3 #define SOCK_PASSSEC 4 +#define PROTO_CMSG_DATA_ONLY 0x0001 + #ifndef ARCH_HAS_SOCKET_TYPES /** * enum sock_type - Socket types @@ -136,6 +138,7 @@ typedef int (*sk_read_actor_t)(read_descriptor_t *, struct sk_buff *, struct proto_ops { int family; + unsigned int flags; struct module *owner; int (*release) (struct socket *sock); int (*bind) (struct socket *sock, diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 18dec08439f9..964b494b0e8d 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -70,6 +70,7 @@ struct udp_tunnel_nic; struct bpf_prog; struct xdp_buff; +void synchronize_net(void); void netdev_set_default_ethtool_ops(struct net_device *dev, const struct ethtool_ops *ops); @@ -211,9 +212,8 @@ struct netdev_hw_addr { unsigned char type; #define NETDEV_HW_ADDR_T_LAN 1 #define NETDEV_HW_ADDR_T_SAN 2 -#define NETDEV_HW_ADDR_T_SLAVE 3 -#define NETDEV_HW_ADDR_T_UNICAST 4 -#define NETDEV_HW_ADDR_T_MULTICAST 5 +#define NETDEV_HW_ADDR_T_UNICAST 3 +#define NETDEV_HW_ADDR_T_MULTICAST 4 bool global_use; int sync_cnt; int refcount; @@ -354,7 +354,7 @@ enum { NAPI_STATE_MISSED, /* reschedule a napi */ NAPI_STATE_DISABLE, /* Disable pending */ NAPI_STATE_NPSVC, /* Netpoll - don't dequeue from poll_list */ - NAPI_STATE_HASHED, /* In NAPI hash (busy polling possible) */ + NAPI_STATE_LISTED, /* NAPI added to system lists */ NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */ NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */ }; @@ -364,7 +364,7 @@ enum { NAPIF_STATE_MISSED = BIT(NAPI_STATE_MISSED), NAPIF_STATE_DISABLE = BIT(NAPI_STATE_DISABLE), NAPIF_STATE_NPSVC = BIT(NAPI_STATE_NPSVC), - NAPIF_STATE_HASHED = BIT(NAPI_STATE_HASHED), + NAPIF_STATE_LISTED = BIT(NAPI_STATE_LISTED), NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL), NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL), }; @@ -489,20 +489,6 @@ static inline bool napi_complete(struct napi_struct *n) } /** - * napi_hash_del - remove a NAPI from global table - * @napi: NAPI context - * - * Warning: caller must observe RCU grace period - * before freeing memory containing @napi, if - * this function returns true. - * Note: core networking stack automatically calls it - * from netif_napi_del(). - * Drivers might want to call this helper to combine all - * the needed RCU grace periods into a single one. - */ -bool napi_hash_del(struct napi_struct *napi); - -/** * napi_disable - prevent NAPI from scheduling * @n: NAPI context * @@ -618,7 +604,7 @@ struct netdev_queue { /* Subordinate device that the queue has been assigned to */ struct net_device *sb_dev; #ifdef CONFIG_XDP_SOCKETS - struct xdp_umem *umem; + struct xsk_buff_pool *pool; #endif /* * write-mostly part @@ -640,11 +626,16 @@ struct netdev_queue { extern int sysctl_fb_tunnels_only_for_init_net; extern int sysctl_devconf_inherit_init_net; +/* + * sysctl_fb_tunnels_only_for_init_net == 0 : For all netns + * == 1 : For initns only + * == 2 : For none. + */ static inline bool net_has_fallback_tunnels(const struct net *net) { - return net == &init_net || - !IS_ENABLED(CONFIG_SYSCTL) || - !sysctl_fb_tunnels_only_for_init_net; + return !IS_ENABLED(CONFIG_SYSCTL) || + !sysctl_fb_tunnels_only_for_init_net || + (net == &init_net && sysctl_fb_tunnels_only_for_init_net == 1); } static inline int netdev_queue_numa_node_read(const struct netdev_queue *q) @@ -751,7 +742,7 @@ struct netdev_rx_queue { struct net_device *dev; struct xdp_rxq_info xdp_rxq; #ifdef CONFIG_XDP_SOCKETS - struct xdp_umem *umem; + struct xsk_buff_pool *pool; #endif } ____cacheline_aligned_in_smp; @@ -879,7 +870,7 @@ enum bpf_netdev_command { /* BPF program for offload callbacks, invoked at program load time. */ BPF_OFFLOAD_MAP_ALLOC, BPF_OFFLOAD_MAP_FREE, - XDP_SETUP_XSK_UMEM, + XDP_SETUP_XSK_POOL, }; struct bpf_prog_offload_ops; @@ -913,9 +904,9 @@ struct netdev_bpf { struct { struct bpf_offloaded_map *offmap; }; - /* XDP_SETUP_XSK_UMEM */ + /* XDP_SETUP_XSK_POOL */ struct { - struct xdp_umem *umem; + struct xsk_buff_pool *pool; u16 queue_id; } xsk; }; @@ -1285,6 +1276,9 @@ struct netdev_net_notifier { * int (*ndo_tunnel_ctl)(struct net_device *dev, struct ip_tunnel_parm *p, * int cmd); * Add, change, delete or get information on an IPv4 tunnel. + * struct net_device *(*ndo_get_peer_dev)(struct net_device *dev); + * If a device is paired with a peer device, return the peer instance. + * The caller must be under RCU read context. */ struct net_device_ops { int (*ndo_init)(struct net_device *dev); @@ -1492,6 +1486,7 @@ struct net_device_ops { struct devlink_port * (*ndo_get_devlink_port)(struct net_device *dev); int (*ndo_tunnel_ctl)(struct net_device *dev, struct ip_tunnel_parm *p, int cmd); + struct net_device * (*ndo_get_peer_dev)(struct net_device *dev); }; /** @@ -2208,6 +2203,22 @@ int netdev_get_num_tc(struct net_device *dev) return dev->num_tc; } +static inline void net_prefetch(void *p) +{ + prefetch(p); +#if L1_CACHE_BYTES < 128 + prefetch((u8 *)p + L1_CACHE_BYTES); +#endif +} + +static inline void net_prefetchw(void *p) +{ + prefetchw(p); +#if L1_CACHE_BYTES < 128 + prefetchw((u8 *)p + L1_CACHE_BYTES); +#endif +} + void netdev_unbind_sb_channel(struct net_device *dev, struct net_device *sb_dev); int netdev_bind_sb_channel_queue(struct net_device *dev, @@ -2363,12 +2374,26 @@ static inline void netif_tx_napi_add(struct net_device *dev, } /** + * __netif_napi_del - remove a NAPI context + * @napi: NAPI context + * + * Warning: caller must observe RCU grace period before freeing memory + * containing @napi. Drivers might want to call this helper to combine + * all the needed RCU grace periods into a single one. + */ +void __netif_napi_del(struct napi_struct *napi); + +/** * netif_napi_del - remove a NAPI context * @napi: NAPI context * * netif_napi_del() removes a NAPI context from the network device NAPI list */ -void netif_napi_del(struct napi_struct *napi); +static inline void netif_napi_del(struct napi_struct *napi) +{ + __netif_napi_del(napi); + synchronize_net(); +} struct napi_gro_cb { /* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */ @@ -2522,6 +2547,16 @@ struct pcpu_lstats { void dev_lstats_read(struct net_device *dev, u64 *packets, u64 *bytes); +static inline void dev_sw_netstats_rx_add(struct net_device *dev, unsigned int len) +{ + struct pcpu_sw_netstats *tstats = this_cpu_ptr(dev->tstats); + + u64_stats_update_begin(&tstats->syncp); + tstats->rx_bytes += len; + tstats->rx_packets++; + u64_stats_update_end(&tstats->syncp); +} + static inline void dev_lstats_add(struct net_device *dev, unsigned int len) { struct pcpu_lstats *lstats = this_cpu_ptr(dev->lstats); @@ -2792,7 +2827,6 @@ static inline void unregister_netdevice(struct net_device *dev) int netdev_refcnt_read(const struct net_device *dev); void free_netdev(struct net_device *dev); void netdev_freemem(struct net_device *dev); -void synchronize_net(void); int init_dummy_netdev(struct net_device *dev); struct net_device *netdev_get_xmit_slave(struct net_device *dev, @@ -3777,6 +3811,7 @@ void generic_xdp_tx(struct sk_buff *skb, struct bpf_prog *xdp_prog); int do_xdp_generic(struct bpf_prog *xdp_prog, struct sk_buff *skb); int netif_rx(struct sk_buff *skb); int netif_rx_ni(struct sk_buff *skb); +int netif_rx_any_context(struct sk_buff *skb); int netif_receive_skb(struct sk_buff *skb); int netif_receive_skb_core(struct sk_buff *skb); void netif_receive_skb_list(struct list_head *head); @@ -4464,6 +4499,8 @@ struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev, struct rtnl_link_stats64 *storage); void netdev_stats_to_stats64(struct rtnl_link_stats64 *stats64, const struct net_device_stats *netdev_stats); +void dev_fetch_sw_netstats(struct rtnl_link_stats64 *s, + const struct pcpu_sw_netstats __percpu *netstats); extern int netdev_max_backlog; extern int netdev_tstamp_prequeue; @@ -4704,16 +4741,6 @@ int netdev_class_create_file_ns(const struct class_attribute *class_attr, void netdev_class_remove_file_ns(const struct class_attribute *class_attr, const void *ns); -static inline int netdev_class_create_file(const struct class_attribute *class_attr) -{ - return netdev_class_create_file_ns(class_attr, NULL); -} - -static inline void netdev_class_remove_file(const struct class_attribute *class_attr) -{ - netdev_class_remove_file_ns(class_attr, NULL); -} - extern const struct kobj_ns_type_operations net_ns_type_operations; const char *netdev_drivername(const struct net_device *dev); diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h index 1db83c931d9c..0c7d8d1e945d 100644 --- a/include/linux/netfilter/nf_conntrack_common.h +++ b/include/linux/netfilter/nf_conntrack_common.h @@ -8,9 +8,9 @@ struct ip_conntrack_stat { unsigned int found; unsigned int invalid; - unsigned int ignore; unsigned int insert; unsigned int insert_failed; + unsigned int clash_resolve; unsigned int drop; unsigned int early_drop; unsigned int error; diff --git a/include/linux/netlink.h b/include/linux/netlink.h index e3e49f0e5c13..666cd0390699 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -68,12 +68,14 @@ netlink_kernel_create(struct net *net, int unit, struct netlink_kernel_cfg *cfg) * @_msg: message string to report - don't access directly, use * %NL_SET_ERR_MSG * @bad_attr: attribute with error + * @policy: policy for a bad attribute * @cookie: cookie data to return to userspace (for success) * @cookie_len: actual cookie data length */ struct netlink_ext_ack { const char *_msg; const struct nlattr *bad_attr; + const struct nla_policy *policy; u8 cookie[NETLINK_MAX_COOKIE_LEN]; u8 cookie_len; }; @@ -95,21 +97,29 @@ struct netlink_ext_ack { #define NL_SET_ERR_MSG_MOD(extack, msg) \ NL_SET_ERR_MSG((extack), KBUILD_MODNAME ": " msg) -#define NL_SET_BAD_ATTR(extack, attr) do { \ - if ((extack)) \ +#define NL_SET_BAD_ATTR_POLICY(extack, attr, pol) do { \ + if ((extack)) { \ (extack)->bad_attr = (attr); \ + (extack)->policy = (pol); \ + } \ } while (0) -#define NL_SET_ERR_MSG_ATTR(extack, attr, msg) do { \ - static const char __msg[] = msg; \ - struct netlink_ext_ack *__extack = (extack); \ - \ - if (__extack) { \ - __extack->_msg = __msg; \ - __extack->bad_attr = (attr); \ - } \ +#define NL_SET_BAD_ATTR(extack, attr) NL_SET_BAD_ATTR_POLICY(extack, attr, NULL) + +#define NL_SET_ERR_MSG_ATTR_POL(extack, attr, pol, msg) do { \ + static const char __msg[] = msg; \ + struct netlink_ext_ack *__extack = (extack); \ + \ + if (__extack) { \ + __extack->_msg = __msg; \ + __extack->bad_attr = (attr); \ + __extack->policy = (pol); \ + } \ } while (0) +#define NL_SET_ERR_MSG_ATTR(extack, attr, msg) \ + NL_SET_ERR_MSG_ATTR_POL(extack, attr, NULL, msg) + static inline void nl_set_extack_cookie_u64(struct netlink_ext_ack *extack, u64 cookie) { diff --git a/include/linux/of.h b/include/linux/of.h index 5cf7ae0465d1..481ec0467285 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -929,6 +929,11 @@ static inline int of_machine_is_compatible(const char *compat) return 0; } +static inline int of_remove_property(struct device_node *np, struct property *prop) +{ + return 0; +} + static inline bool of_console_check(const struct device_node *dn, const char *name, int index) { return false; diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h index 1efb88d9f892..cfe8c607a628 100644 --- a/include/linux/of_mdio.h +++ b/include/linux/of_mdio.h @@ -17,6 +17,7 @@ bool of_mdiobus_child_is_phy(struct device_node *child); int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np); int devm_of_mdiobus_register(struct device *dev, struct mii_bus *mdio, struct device_node *np); +struct mdio_device *of_mdio_find_device(struct device_node *np); struct phy_device *of_phy_find_device(struct device_node *phy_np); struct phy_device * of_phy_connect(struct net_device *dev, struct device_node *phy_np, @@ -74,6 +75,11 @@ static inline int of_mdiobus_register(struct mii_bus *mdio, struct device_node * return mdiobus_register(mdio); } +static inline struct mdio_device *of_mdio_find_device(struct device_node *np) +{ + return NULL; +} + static inline struct phy_device *of_phy_find_device(struct device_node *phy_np) { return NULL; diff --git a/include/linux/pcs-lynx.h b/include/linux/pcs-lynx.h new file mode 100644 index 000000000000..a6440d6ebe95 --- /dev/null +++ b/include/linux/pcs-lynx.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* Copyright 2020 NXP + * Lynx PCS helpers + */ + +#ifndef __LINUX_PCS_LYNX_H +#define __LINUX_PCS_LYNX_H + +#include <linux/mdio.h> +#include <linux/phylink.h> + +struct lynx_pcs { + struct phylink_pcs pcs; + struct mdio_device *mdio; +}; + +struct lynx_pcs *lynx_pcs_create(struct mdio_device *mdio); + +void lynx_pcs_destroy(struct lynx_pcs *pcs); + +#endif /* __LINUX_PCS_LYNX_H */ diff --git a/include/linux/mdio-xpcs.h b/include/linux/pcs/pcs-xpcs.h index 9a841aa5982d..351c1c9aedc5 100644 --- a/include/linux/mdio-xpcs.h +++ b/include/linux/pcs/pcs-xpcs.h @@ -4,8 +4,8 @@ * Synopsys DesignWare XPCS helpers */ -#ifndef __LINUX_MDIO_XPCS_H -#define __LINUX_MDIO_XPCS_H +#ifndef __LINUX_PCS_XPCS_H +#define __LINUX_PCS_XPCS_H #include <linux/phy.h> #include <linux/phylink.h> @@ -29,7 +29,7 @@ struct mdio_xpcs_ops { int (*probe)(struct mdio_xpcs_args *xpcs, phy_interface_t interface); }; -#if IS_ENABLED(CONFIG_MDIO_XPCS) +#if IS_ENABLED(CONFIG_PCS_XPCS) struct mdio_xpcs_ops *mdio_xpcs_get_ops(void); #else static inline struct mdio_xpcs_ops *mdio_xpcs_get_ops(void) @@ -38,4 +38,4 @@ static inline struct mdio_xpcs_ops *mdio_xpcs_get_ops(void) } #endif -#endif /* __LINUX_MDIO_XPCS_H */ +#endif /* __LINUX_PCS_XPCS_H */ diff --git a/include/linux/phy.h b/include/linux/phy.h index 3a09d2bf69ea..eb3cb1a98b45 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -82,7 +82,39 @@ extern const int phy_10gbit_features_array[1]; #define PHY_POLL_CABLE_TEST 0x00000004 #define MDIO_DEVICE_IS_PHY 0x80000000 -/* Interface Mode definitions */ +/** + * enum phy_interface_t - Interface Mode definitions + * + * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch + * @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined + * @PHY_INTERFACE_MODE_MII: Median-independent interface + * @PHY_INTERFACE_MODE_GMII: Gigabit median-independent interface + * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface + * @PHY_INTERFACE_MODE_TBI: Ten Bit Interface + * @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface + * @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface + * @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface + * @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay + * @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay + * @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal RX delay + * @PHY_INTERFACE_MODE_RTBI: Reduced TBI + * @PHY_INTERFACE_MODE_SMII: ??? MII + * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface + * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface + * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax + * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII + * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII + * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX + * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX + * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI + * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface + * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR + * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII + * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN + * @PHY_INTERFACE_MODE_MAX: Book keeping + * + * Describes the interface between the MAC and PHY. + */ typedef enum { PHY_INTERFACE_MODE_NA, PHY_INTERFACE_MODE_INTERNAL, @@ -116,8 +148,8 @@ typedef enum { } phy_interface_t; /** - * phy_supported_speeds - return all speeds currently supported by a phy device - * @phy: The phy device to return supported speeds of. + * phy_supported_speeds - return all speeds currently supported by a PHY device + * @phy: The PHY device to return supported speeds of. * @speeds: buffer to store supported speeds in. * @size: size of speeds buffer. * @@ -134,9 +166,9 @@ unsigned int phy_supported_speeds(struct phy_device *phy, * phy_modes - map phy_interface_t enum to device tree binding of phy-mode * @interface: enum phy_interface_t value * - * Description: maps 'enum phy_interface_t' defined in this file + * Description: maps enum &phy_interface_t defined in this file * into the device tree binding of 'phy-mode', so that Ethernet - * device driver can get phy interface from device tree. + * device driver can get PHY interface from device tree. */ static inline const char *phy_modes(phy_interface_t interface) { @@ -215,6 +247,14 @@ struct sfp_bus; struct sfp_upstream_ops; struct sk_buff; +/** + * struct mdio_bus_stats - Statistics counters for MDIO busses + * @transfers: Total number of transfers, i.e. @writes + @reads + * @errors: Number of MDIO transfers that returned an error + * @writes: Number of write transfers + * @reads: Number of read transfers + * @syncp: Synchronisation for incrementing statistics + */ struct mdio_bus_stats { u64_stats_t transfers; u64_stats_t errors; @@ -224,7 +264,15 @@ struct mdio_bus_stats { struct u64_stats_sync syncp; }; -/* Represents a shared structure between different phydev's in the same +/** + * struct phy_package_shared - Shared information in PHY packages + * @addr: Common PHY address used to combine PHYs in one package + * @refcnt: Number of PHYs connected to this shared data + * @flags: Initialization of PHY package + * @priv_size: Size of the shared private data @priv + * @priv: Driver private data shared across a PHY package + * + * Represents a shared structure between different phydev's in the same * package, for example a quad PHY. See phy_package_join() and * phy_package_leave(). */ @@ -247,7 +295,14 @@ struct phy_package_shared { #define PHY_SHARED_F_INIT_DONE 0 #define PHY_SHARED_F_PROBE_DONE 1 -/* +/** + * struct mii_bus - Represents an MDIO bus + * + * @owner: Who owns this device + * @name: User friendly name for this MDIO device, or driver name + * @id: Unique identifier for this bus, typical from bus hierarchy + * @priv: Driver private data + * * The Bus class for PHYs. Devices which provide access to * PHYs should register using this structure */ @@ -256,49 +311,58 @@ struct mii_bus { const char *name; char id[MII_BUS_ID_SIZE]; void *priv; + /** @read: Perform a read transfer on the bus */ int (*read)(struct mii_bus *bus, int addr, int regnum); + /** @write: Perform a write transfer on the bus */ int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); + /** @reset: Perform a reset of the bus */ int (*reset)(struct mii_bus *bus); + + /** @stats: Statistic counters per device on the bus */ struct mdio_bus_stats stats[PHY_MAX_ADDR]; - /* - * A lock to ensure that only one thing can read/write + /** + * @mdio_lock: A lock to ensure that only one thing can read/write * the MDIO bus at a time */ struct mutex mdio_lock; + /** @parent: Parent device of this bus */ struct device *parent; + /** @state: State of bus structure */ enum { MDIOBUS_ALLOCATED = 1, MDIOBUS_REGISTERED, MDIOBUS_UNREGISTERED, MDIOBUS_RELEASED, } state; + + /** @dev: Kernel device representation */ struct device dev; - /* list of all PHYs on bus */ + /** @mdio_map: list of all MDIO devices on bus */ struct mdio_device *mdio_map[PHY_MAX_ADDR]; - /* PHY addresses to be ignored when probing */ + /** @phy_mask: PHY addresses to be ignored when probing */ u32 phy_mask; - /* PHY addresses to ignore the TA/read failure */ + /** @phy_ignore_ta_mask: PHY addresses to ignore the TA/read failure */ u32 phy_ignore_ta_mask; - /* - * An array of interrupts, each PHY's interrupt at the index + /** + * @irq: An array of interrupts, each PHY's interrupt at the index * matching its address */ int irq[PHY_MAX_ADDR]; - /* GPIO reset pulse width in microseconds */ + /** @reset_delay_us: GPIO reset pulse width in microseconds */ int reset_delay_us; - /* GPIO reset deassert delay in microseconds */ + /** @reset_post_delay_us: GPIO reset deassert delay in microseconds */ int reset_post_delay_us; - /* RESET GPIO descriptor pointer */ + /** @reset_gpiod: Reset GPIO descriptor pointer */ struct gpio_desc *reset_gpiod; - /* bus capabilities, used for probing */ + /** @probe_capabilities: bus capabilities, used for probing */ enum { MDIOBUS_NO_CAP = 0, MDIOBUS_C22, @@ -306,15 +370,22 @@ struct mii_bus { MDIOBUS_C22_C45, } probe_capabilities; - /* protect access to the shared element */ + /** @shared_lock: protect access to the shared element */ struct mutex shared_lock; - /* shared state across different PHYs */ + /** @shared: shared state across different PHYs */ struct phy_package_shared *shared[PHY_MAX_ADDR]; }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) -struct mii_bus *mdiobus_alloc_size(size_t); +struct mii_bus *mdiobus_alloc_size(size_t size); + +/** + * mdiobus_alloc - Allocate an MDIO bus structure + * + * The internal state of the MDIO bus will be set of MDIOBUS_ALLOCATED ready + * for the driver to register the bus. + */ static inline struct mii_bus *mdiobus_alloc(void) { return mdiobus_alloc_size(0); @@ -341,40 +412,41 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); #define PHY_INTERRUPT_DISABLED false #define PHY_INTERRUPT_ENABLED true -/* PHY state machine states: +/** + * enum phy_state - PHY state machine states: * - * DOWN: PHY device and driver are not ready for anything. probe + * @PHY_DOWN: PHY device and driver are not ready for anything. probe * should be called if and only if the PHY is in this state, * given that the PHY device exists. - * - PHY driver probe function will set the state to READY + * - PHY driver probe function will set the state to @PHY_READY * - * READY: PHY is ready to send and receive packets, but the + * @PHY_READY: PHY is ready to send and receive packets, but the * controller is not. By default, PHYs which do not implement * probe will be set to this state by phy_probe(). * - start will set the state to UP * - * UP: The PHY and attached device are ready to do work. + * @PHY_UP: The PHY and attached device are ready to do work. * Interrupts should be started here. - * - timer moves to NOLINK or RUNNING + * - timer moves to @PHY_NOLINK or @PHY_RUNNING * - * NOLINK: PHY is up, but not currently plugged in. - * - irq or timer will set RUNNING if link comes back - * - phy_stop moves to HALTED + * @PHY_NOLINK: PHY is up, but not currently plugged in. + * - irq or timer will set @PHY_RUNNING if link comes back + * - phy_stop moves to @PHY_HALTED * - * RUNNING: PHY is currently up, running, and possibly sending + * @PHY_RUNNING: PHY is currently up, running, and possibly sending * and/or receiving packets - * - irq or timer will set NOLINK if link goes down - * - phy_stop moves to HALTED + * - irq or timer will set @PHY_NOLINK if link goes down + * - phy_stop moves to @PHY_HALTED * - * CABLETEST: PHY is performing a cable test. Packet reception/sending + * @PHY_CABLETEST: PHY is performing a cable test. Packet reception/sending * is not expected to work, carrier will be indicated as down. PHY will be * poll once per second, or on interrupt for it current state. * Once complete, move to UP to restart the PHY. - * - phy_stop aborts the running test and moves to HALTED + * - phy_stop aborts the running test and moves to @PHY_HALTED * - * HALTED: PHY is up, but no polling or interrupts are done. Or + * @PHY_HALTED: PHY is up, but no polling or interrupts are done. Or * PHY is in an error state. - * - phy_start moves to UP + * - phy_start moves to @PHY_UP */ enum phy_state { PHY_DOWN = 0, @@ -403,34 +475,67 @@ struct phy_c45_device_ids { struct macsec_context; struct macsec_ops; -/* phy_device: An instance of a PHY +/** + * struct phy_device - An instance of a PHY * - * drv: Pointer to the driver for this PHY instance - * phy_id: UID for this device found during discovery - * c45_ids: 802.3-c45 Device Identifers if is_c45. - * is_c45: Set to true if this phy uses clause 45 addressing. - * is_internal: Set to true if this phy is internal to a MAC. - * is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc. - * is_gigabit_capable: Set to true if PHY supports 1000Mbps - * has_fixups: Set to true if this phy has fixups/quirks. - * suspended: Set to true if this phy has been suspended successfully. - * suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus. - * sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. - * loopback_enabled: Set true if this phy has been loopbacked successfully. - * downshifted_rate: Set true if link speed has been downshifted. - * state: state of the PHY for management purposes - * dev_flags: Device-specific flags used by the PHY driver. - * irq: IRQ number of the PHY's interrupt (-1 if none) - * phy_timer: The timer for handling the state machine - * sfp_bus_attached: flag indicating whether the SFP bus has been attached - * sfp_bus: SFP bus attached to this PHY's fiber port - * attached_dev: The attached enet driver's device instance ptr - * adjust_link: Callback for the enet controller to respond to - * changes in the link state. - * macsec_ops: MACsec offloading ops. + * @mdio: MDIO bus this PHY is on + * @drv: Pointer to the driver for this PHY instance + * @phy_id: UID for this device found during discovery + * @c45_ids: 802.3-c45 Device Identifiers if is_c45. + * @is_c45: Set to true if this PHY uses clause 45 addressing. + * @is_internal: Set to true if this PHY is internal to a MAC. + * @is_pseudo_fixed_link: Set to true if this PHY is an Ethernet switch, etc. + * @is_gigabit_capable: Set to true if PHY supports 1000Mbps + * @has_fixups: Set to true if this PHY has fixups/quirks. + * @suspended: Set to true if this PHY has been suspended successfully. + * @suspended_by_mdio_bus: Set to true if this PHY was suspended by MDIO bus. + * @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. + * @loopback_enabled: Set true if this PHY has been loopbacked successfully. + * @downshifted_rate: Set true if link speed has been downshifted. + * @state: State of the PHY for management purposes + * @dev_flags: Device-specific flags used by the PHY driver. + * @irq: IRQ number of the PHY's interrupt (-1 if none) + * @phy_timer: The timer for handling the state machine + * @phylink: Pointer to phylink instance for this PHY + * @sfp_bus_attached: Flag indicating whether the SFP bus has been attached + * @sfp_bus: SFP bus attached to this PHY's fiber port + * @attached_dev: The attached enet driver's device instance ptr + * @adjust_link: Callback for the enet controller to respond to changes: in the + * link state. + * @phy_link_change: Callback for phylink for notification of link change + * @macsec_ops: MACsec offloading ops. * - * speed, duplex, pause, supported, advertising, lp_advertising, - * and autoneg are used like in mii_if_info + * @speed: Current link speed + * @duplex: Current duplex + * @pause: Current pause + * @asym_pause: Current asymmetric pause + * @supported: Combined MAC/PHY supported linkmodes + * @advertising: Currently advertised linkmodes + * @adv_old: Saved advertised while power saving for WoL + * @lp_advertising: Current link partner advertised linkmodes + * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited + * @autoneg: Flag autoneg being used + * @link: Current link state + * @autoneg_complete: Flag auto negotiation of the link has completed + * @mdix: Current crossover + * @mdix_ctrl: User setting of crossover + * @interrupts: Flag interrupts have been enabled + * @interface: enum phy_interface_t value + * @skb: Netlink message for cable diagnostics + * @nest: Netlink nest used for cable diagnostics + * @ehdr: nNtlink header for cable diagnostics + * @phy_led_triggers: Array of LED triggers + * @phy_num_led_triggers: Number of triggers in @phy_led_triggers + * @led_link_trigger: LED trigger for link up/down + * @last_triggered: last LED trigger for link speed + * @master_slave_set: User requested master/slave configuration + * @master_slave_get: Current master/slave advertisement + * @master_slave_state: Current master/slave configuration + * @mii_ts: Pointer to time stamper callbacks + * @lock: Mutex for serialization access to PHY + * @state_queue: Work queue for state machine + * @shared: Pointer to private data shared by phys in one package + * @priv: Pointer to driver private data * * interrupts currently only supports enabled or disabled, * but could be changed in the future to support enabling @@ -550,9 +655,18 @@ struct phy_device { #define to_phy_device(d) container_of(to_mdio_device(d), \ struct phy_device, mdio) -/* A structure containing possible configuration parameters +/** + * struct phy_tdr_config - Configuration of a TDR raw test + * + * @first: Distance for first data collection point + * @last: Distance for last data collection point + * @step: Step between data collection points + * @pair: Bitmap of cable pairs to collect data for + * + * A structure containing possible configuration parameters * for a TDR cable test. The driver does not need to implement * all the parameters, but should report what is actually used. + * All distances are in centimeters. */ struct phy_tdr_config { u32 first; @@ -562,18 +676,20 @@ struct phy_tdr_config { }; #define PHY_PAIR_ALL -1 -/* struct phy_driver: Driver structure for a particular PHY type +/** + * struct phy_driver - Driver structure for a particular PHY type * - * driver_data: static driver data - * phy_id: The result of reading the UID registers of this PHY + * @mdiodrv: Data common to all MDIO devices + * @phy_id: The result of reading the UID registers of this PHY * type, and ANDing them with the phy_id_mask. This driver * only works for PHYs with IDs which match this field - * name: The friendly name of this PHY type - * phy_id_mask: Defines the important bits of the phy_id - * features: A mandatory list of features (speed, duplex, etc) + * @name: The friendly name of this PHY type + * @phy_id_mask: Defines the important bits of the phy_id + * @features: A mandatory list of features (speed, duplex, etc) * supported by this PHY - * flags: A bitfield defining certain other features this PHY + * @flags: A bitfield defining certain other features this PHY * supports (like interrupts) + * @driver_data: Static driver data * * All functions are optional. If config_aneg or read_status * are not implemented, the phy core uses the genphy versions. @@ -592,151 +708,178 @@ struct phy_driver { u32 flags; const void *driver_data; - /* - * Called to issue a PHY software reset + /** + * @soft_reset: Called to issue a PHY software reset */ int (*soft_reset)(struct phy_device *phydev); - /* - * Called to initialize the PHY, + /** + * @config_init: Called to initialize the PHY, * including after a reset */ int (*config_init)(struct phy_device *phydev); - /* - * Called during discovery. Used to set + /** + * @probe: Called during discovery. Used to set * up device-specific structures, if any */ int (*probe)(struct phy_device *phydev); - /* - * Probe the hardware to determine what abilities it has. - * Should only set phydev->supported. + /** + * @get_features: Probe the hardware to determine what + * abilities it has. Should only set phydev->supported. */ int (*get_features)(struct phy_device *phydev); /* PHY Power Management */ + /** @suspend: Suspend the hardware, saving state if needed */ int (*suspend)(struct phy_device *phydev); + /** @resume: Resume the hardware, restoring state if needed */ int (*resume)(struct phy_device *phydev); - /* - * Configures the advertisement and resets + /** + * @config_aneg: Configures the advertisement and resets * autonegotiation if phydev->autoneg is on, * forces the speed to the current settings in phydev * if phydev->autoneg is off */ int (*config_aneg)(struct phy_device *phydev); - /* Determines the auto negotiation result */ + /** @aneg_done: Determines the auto negotiation result */ int (*aneg_done)(struct phy_device *phydev); - /* Determines the negotiated speed and duplex */ + /** @read_status: Determines the negotiated speed and duplex */ int (*read_status)(struct phy_device *phydev); - /* Clears any pending interrupts */ + /** @ack_interrupt: Clears any pending interrupts */ int (*ack_interrupt)(struct phy_device *phydev); - /* Enables or disables interrupts */ + /** @config_intr: Enables or disables interrupts */ int (*config_intr)(struct phy_device *phydev); - /* - * Checks if the PHY generated an interrupt. + /** + * @did_interrupt: Checks if the PHY generated an interrupt. * For multi-PHY devices with shared PHY interrupt pin * Set interrupt bits have to be cleared. */ int (*did_interrupt)(struct phy_device *phydev); - /* Override default interrupt handling */ + /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); - /* Clears up any memory if needed */ + /** @remove: Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); - /* Returns true if this is a suitable driver for the given - * phydev. If NULL, matching is based on phy_id and - * phy_id_mask. + /** + * @match_phy_device: Returns true if this is a suitable + * driver for the given phydev. If NULL, matching is based on + * phy_id and phy_id_mask. */ int (*match_phy_device)(struct phy_device *phydev); - /* Some devices (e.g. qnap TS-119P II) require PHY register changes to - * enable Wake on LAN, so set_wol is provided to be called in the - * ethernet driver's set_wol function. */ + /** + * @set_wol: Some devices (e.g. qnap TS-119P II) require PHY + * register changes to enable Wake on LAN, so set_wol is + * provided to be called in the ethernet driver's set_wol + * function. + */ int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); - /* See set_wol, but for checking whether Wake on LAN is enabled. */ + /** + * @get_wol: See set_wol, but for checking whether Wake on LAN + * is enabled. + */ void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); - /* - * Called to inform a PHY device driver when the core is about to - * change the link state. This callback is supposed to be used as - * fixup hook for drivers that need to take action when the link - * state changes. Drivers are by no means allowed to mess with the + /** + * @link_change_notify: Called to inform a PHY device driver + * when the core is about to change the link state. This + * callback is supposed to be used as fixup hook for drivers + * that need to take action when the link state + * changes. Drivers are by no means allowed to mess with the * PHY device structure in their implementations. */ void (*link_change_notify)(struct phy_device *dev); - /* - * Phy specific driver override for reading a MMD register. - * This function is optional for PHY specific drivers. When - * not provided, the default MMD read function will be used - * by phy_read_mmd(), which will use either a direct read for - * Clause 45 PHYs or an indirect read for Clause 22 PHYs. - * devnum is the MMD device number within the PHY device, - * regnum is the register within the selected MMD device. + /** + * @read_mmd: PHY specific driver override for reading a MMD + * register. This function is optional for PHY specific + * drivers. When not provided, the default MMD read function + * will be used by phy_read_mmd(), which will use either a + * direct read for Clause 45 PHYs or an indirect read for + * Clause 22 PHYs. devnum is the MMD device number within the + * PHY device, regnum is the register within the selected MMD + * device. */ int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum); - /* - * Phy specific driver override for writing a MMD register. - * This function is optional for PHY specific drivers. When - * not provided, the default MMD write function will be used - * by phy_write_mmd(), which will use either a direct write for - * Clause 45 PHYs, or an indirect write for Clause 22 PHYs. - * devnum is the MMD device number within the PHY device, - * regnum is the register within the selected MMD device. - * val is the value to be written. + /** + * @write_mmd: PHY specific driver override for writing a MMD + * register. This function is optional for PHY specific + * drivers. When not provided, the default MMD write function + * will be used by phy_write_mmd(), which will use either a + * direct write for Clause 45 PHYs, or an indirect write for + * Clause 22 PHYs. devnum is the MMD device number within the + * PHY device, regnum is the register within the selected MMD + * device. val is the value to be written. */ int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, u16 val); + /** @read_page: Return the current PHY register page number */ int (*read_page)(struct phy_device *dev); + /** @write_page: Set the current PHY register page number */ int (*write_page)(struct phy_device *dev, int page); - /* Get the size and type of the eeprom contained within a plug-in - * module */ + /** + * @module_info: Get the size and type of the eeprom contained + * within a plug-in module + */ int (*module_info)(struct phy_device *dev, struct ethtool_modinfo *modinfo); - /* Get the eeprom information from the plug-in module */ + /** + * @module_eeprom: Get the eeprom information from the plug-in + * module + */ int (*module_eeprom)(struct phy_device *dev, struct ethtool_eeprom *ee, u8 *data); - /* Start a cable test */ + /** @cable_test_start: Start a cable test */ int (*cable_test_start)(struct phy_device *dev); - /* Start a raw TDR cable test */ + /** @cable_test_tdr_start: Start a raw TDR cable test */ int (*cable_test_tdr_start)(struct phy_device *dev, const struct phy_tdr_config *config); - /* Once per second, or on interrupt, request the status of the - * test. + /** + * @cable_test_get_status: Once per second, or on interrupt, + * request the status of the test. */ int (*cable_test_get_status)(struct phy_device *dev, bool *finished); - /* Get statistics from the phy using ethtool */ + /* Get statistics from the PHY using ethtool */ + /** @get_sset_count: Number of statistic counters */ int (*get_sset_count)(struct phy_device *dev); + /** @get_strings: Names of the statistic counters */ void (*get_strings)(struct phy_device *dev, u8 *data); + /** @get_stats: Return the statistic counter values */ void (*get_stats)(struct phy_device *dev, struct ethtool_stats *stats, u64 *data); /* Get and Set PHY tunables */ + /** @get_tunable: Return the value of a tunable */ int (*get_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, void *data); + /** @set_tunable: Set the value of a tunable */ int (*set_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, const void *data); + /** @set_loopback: Set the loopback mood of the PHY */ int (*set_loopback)(struct phy_device *dev, bool enable); + /** @get_sqi: Get the signal quality indication */ int (*get_sqi)(struct phy_device *dev); + /** @get_sqi_max: Get the maximum signal quality indication */ int (*get_sqi_max)(struct phy_device *dev); }; #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ @@ -890,6 +1033,24 @@ static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, */ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); +/** + * phy_read_mmd_poll_timeout - Periodically poll a PHY register until a + * condition is met or a timeout occurs + * + * @phydev: The phy_device struct + * @devaddr: The MMD to read from + * @regnum: The register on the MMD to read + * @val: Variable to read the register into + * @cond: Break condition (usually involving @val) + * @sleep_us: Maximum time to sleep between reads in us (0 + * tight-loops). Should be less than ~20ms since usleep_range + * is used (see Documentation/timers/timers-howto.rst). + * @timeout_us: Timeout in us, 0 means never timeout + * @sleep_before_read: if it is true, sleep @sleep_us before read. + * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @args is stored in @val. Must not + * be called from atomic context if sleep_us or timeout_us are used. + */ #define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ sleep_us, timeout_us, sleep_before_read) \ ({ \ @@ -1161,7 +1322,7 @@ static inline bool phy_is_internal(struct phy_device *phydev) /** * phy_interface_mode_is_rgmii - Convenience function for testing if a * PHY interface mode is RGMII (all variants) - * @mode: the phy_interface_t enum + * @mode: the &phy_interface_t enum */ static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode) { @@ -1170,11 +1331,11 @@ static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode) }; /** - * phy_interface_mode_is_8023z() - does the phy interface mode use 802.3z + * phy_interface_mode_is_8023z() - does the PHY interface mode use 802.3z * negotiation * @mode: one of &enum phy_interface_t * - * Returns true if the phy interface mode uses the 16-bit negotiation + * Returns true if the PHY interface mode uses the 16-bit negotiation * word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding) */ static inline bool phy_interface_mode_is_8023z(phy_interface_t mode) @@ -1193,7 +1354,7 @@ static inline bool phy_interface_is_rgmii(struct phy_device *phydev) return phy_interface_mode_is_rgmii(phydev->interface); }; -/* +/** * phy_is_pseudo_fixed_link - Convenience function for testing if this * PHY is the CPU port facing side of an Ethernet switch, or similar. * @phydev: the phy_device struct @@ -1566,8 +1727,9 @@ static inline int mdiobus_register_board_info(const struct mdio_board_info *i, /** - * module_phy_driver() - Helper macro for registering PHY drivers + * phy_module_driver() - Helper macro for registering PHY drivers * @__phy_drivers: array of PHY drivers to register + * @__count: Numbers of members in array * * Helper macro for PHY drivers which do not do anything special in module * init/exit. Each module may only use this macro once, and calling it diff --git a/include/linux/phylink.h b/include/linux/phylink.h index c36fb41a7d90..d81a714cfbbd 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -490,4 +490,7 @@ void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs); void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs, struct phylink_link_state *state); + +void phylink_decode_usxgmii_word(struct phylink_link_state *state, + uint16_t lpa); #endif diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h deleted file mode 100644 index aa5b5562d6f7..000000000000 --- a/include/linux/platform_data/macb.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2004-2006 Atmel Corporation - */ -#ifndef __MACB_PDATA_H__ -#define __MACB_PDATA_H__ - -#include <linux/clk.h> - -/** - * struct macb_platform_data - platform data for MACB Ethernet - * @pclk: platform clock - * @hclk: AHB clock - */ -struct macb_platform_data { - struct clk *pclk; - struct clk *hclk; -}; - -#endif /* __MACB_PDATA_H__ */ diff --git a/include/linux/prefetch.h b/include/linux/prefetch.h index 13eafebf3549..b83a3f944f28 100644 --- a/include/linux/prefetch.h +++ b/include/linux/prefetch.h @@ -15,6 +15,7 @@ #include <asm/processor.h> #include <asm/cache.h> +struct page; /* prefetch(x) attempts to pre-emptively get the memory pointed to by address "x" into the CPU L1 cache. @@ -62,4 +63,11 @@ static inline void prefetch_range(void *addr, size_t len) #endif } +static inline void prefetch_page_address(struct page *page) +{ +#if defined(WANT_PAGE_VIRTUAL) || defined(HASHED_PAGE_VIRTUAL) + prefetch(page); +#endif +} + #endif diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h index dd00fa41f7e7..c6487b7ab026 100644 --- a/include/linux/ptp_classify.h +++ b/include/linux/ptp_classify.h @@ -36,7 +36,6 @@ #define OFF_PTP_SOURCE_UUID 22 /* PTPv1 only */ #define OFF_PTP_SEQUENCE_ID 30 -#define OFF_PTP_CONTROL 32 /* PTPv1 only */ /* Below defines should actually be removed at some point in time. */ #define IP6_HLEN 40 @@ -44,6 +43,30 @@ #define OFF_IHL 14 #define IPV4_HLEN(data) (((struct iphdr *)(data + OFF_IHL))->ihl << 2) +struct clock_identity { + u8 id[8]; +} __packed; + +struct port_identity { + struct clock_identity clock_identity; + __be16 port_number; +} __packed; + +struct ptp_header { + u8 tsmt; /* transportSpecific | messageType */ + u8 ver; /* reserved | versionPTP */ + __be16 message_length; + u8 domain_number; + u8 reserved1; + u8 flag_field[2]; + __be64 correction; + __be32 reserved2; + struct port_identity source_port_identity; + __be16 sequence_id; + u8 control; + u8 log_message_interval; +} __packed; + #if defined(CONFIG_NET_PTP_CLASSIFY) /** * ptp_classify_raw - classify a PTP packet @@ -57,6 +80,46 @@ */ unsigned int ptp_classify_raw(const struct sk_buff *skb); +/** + * ptp_parse_header - Get pointer to the PTP v2 header + * @skb: packet buffer + * @type: type of the packet (see ptp_classify_raw()) + * + * This function takes care of the VLAN, UDP, IPv4 and IPv6 headers. The length + * is checked. + * + * Note, internally skb_mac_header() is used. Make sure that the @skb is + * initialized accordingly. + * + * Return: Pointer to the ptp v2 header or NULL if not found + */ +struct ptp_header *ptp_parse_header(struct sk_buff *skb, unsigned int type); + +/** + * ptp_get_msgtype - Extract ptp message type from given header + * @hdr: ptp header + * @type: type of the packet (see ptp_classify_raw()) + * + * This function returns the message type for a given ptp header. It takes care + * of the different ptp header versions (v1 or v2). + * + * Return: The message type + */ +static inline u8 ptp_get_msgtype(const struct ptp_header *hdr, + unsigned int type) +{ + u8 msgtype; + + if (unlikely(type & PTP_CLASS_V1)) { + /* msg type is located at the control field for ptp v1 */ + msgtype = hdr->control; + } else { + msgtype = hdr->tsmt & 0x0f; + } + + return msgtype; +} + void __init ptp_classifier_init(void); #else static inline void ptp_classifier_init(void) @@ -66,5 +129,18 @@ static inline unsigned int ptp_classify_raw(struct sk_buff *skb) { return PTP_CLASS_NONE; } +static inline struct ptp_header *ptp_parse_header(struct sk_buff *skb, + unsigned int type) +{ + return NULL; +} +static inline u8 ptp_get_msgtype(const struct ptp_header *hdr, + unsigned int type) +{ + /* The return is meaningless. The stub function would not be + * executed since no available header from ptp_parse_header. + */ + return 0; +} #endif #endif /* _PTP_CLASSIFY_H_ */ diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h index cdd73afc4c46..57fb295ea41a 100644 --- a/include/linux/qed/qed_if.h +++ b/include/linux/qed/qed_if.h @@ -21,6 +21,7 @@ #include <linux/qed/common_hsi.h> #include <linux/qed/qed_chain.h> #include <linux/io-64-nonatomic-lo-hi.h> +#include <net/devlink.h> enum dcbx_protocol_type { DCBX_PROTOCOL_ISCSI, @@ -780,6 +781,11 @@ enum qed_nvm_flash_cmd { QED_NVM_FLASH_CMD_NVM_MAX, }; +struct qed_devlink { + struct qed_dev *cdev; + struct devlink_health_reporter *fw_reporter; +}; + struct qed_common_cb_ops { void (*arfs_filter_op)(void *dev, void *fltr, u8 fw_rc); void (*link_update)(void *dev, struct qed_link_output *link); @@ -845,10 +851,9 @@ struct qed_common_ops { struct qed_dev* (*probe)(struct pci_dev *dev, struct qed_probe_params *params); - void (*remove)(struct qed_dev *cdev); + void (*remove)(struct qed_dev *cdev); - int (*set_power_state)(struct qed_dev *cdev, - pci_power_t state); + int (*set_power_state)(struct qed_dev *cdev, pci_power_t state); void (*set_name) (struct qed_dev *cdev, char name[]); @@ -856,50 +861,51 @@ struct qed_common_ops { * PF params required for the call before slowpath_start is * documented within the qed_pf_params structure definition. */ - void (*update_pf_params)(struct qed_dev *cdev, - struct qed_pf_params *params); - int (*slowpath_start)(struct qed_dev *cdev, - struct qed_slowpath_params *params); + void (*update_pf_params)(struct qed_dev *cdev, + struct qed_pf_params *params); - int (*slowpath_stop)(struct qed_dev *cdev); + int (*slowpath_start)(struct qed_dev *cdev, + struct qed_slowpath_params *params); + + int (*slowpath_stop)(struct qed_dev *cdev); /* Requests to use `cnt' interrupts for fastpath. * upon success, returns number of interrupts allocated for fastpath. */ - int (*set_fp_int)(struct qed_dev *cdev, - u16 cnt); + int (*set_fp_int)(struct qed_dev *cdev, u16 cnt); /* Fills `info' with pointers required for utilizing interrupts */ - int (*get_fp_int)(struct qed_dev *cdev, - struct qed_int_info *info); - - u32 (*sb_init)(struct qed_dev *cdev, - struct qed_sb_info *sb_info, - void *sb_virt_addr, - dma_addr_t sb_phy_addr, - u16 sb_id, - enum qed_sb_type type); - - u32 (*sb_release)(struct qed_dev *cdev, - struct qed_sb_info *sb_info, - u16 sb_id, - enum qed_sb_type type); - - void (*simd_handler_config)(struct qed_dev *cdev, - void *token, - int index, - void (*handler)(void *)); - - void (*simd_handler_clean)(struct qed_dev *cdev, - int index); - int (*dbg_grc)(struct qed_dev *cdev, - void *buffer, u32 *num_dumped_bytes); + int (*get_fp_int)(struct qed_dev *cdev, struct qed_int_info *info); + + u32 (*sb_init)(struct qed_dev *cdev, + struct qed_sb_info *sb_info, + void *sb_virt_addr, + dma_addr_t sb_phy_addr, + u16 sb_id, + enum qed_sb_type type); + + u32 (*sb_release)(struct qed_dev *cdev, + struct qed_sb_info *sb_info, + u16 sb_id, + enum qed_sb_type type); + + void (*simd_handler_config)(struct qed_dev *cdev, + void *token, + int index, + void (*handler)(void *)); + + void (*simd_handler_clean)(struct qed_dev *cdev, int index); + + int (*dbg_grc)(struct qed_dev *cdev, void *buffer, u32 *num_dumped_bytes); int (*dbg_grc_size)(struct qed_dev *cdev); - int (*dbg_all_data) (struct qed_dev *cdev, void *buffer); + int (*dbg_all_data)(struct qed_dev *cdev, void *buffer); - int (*dbg_all_data_size) (struct qed_dev *cdev); + int (*dbg_all_data_size)(struct qed_dev *cdev); + + int (*report_fatal_error)(struct devlink *devlink, + enum qed_hw_err_type err_type); /** * @brief can_link_change - can the instance change the link or not @@ -1138,6 +1144,10 @@ struct qed_common_ops { * */ int (*set_grc_config)(struct qed_dev *cdev, u32 cfg_id, u32 val); + + struct devlink* (*devlink_register)(struct qed_dev *cdev); + + void (*devlink_unregister)(struct devlink *devlink); }; #define MASK_FIELD(_name, _value) \ diff --git a/include/linux/rcupdate_trace.h b/include/linux/rcupdate_trace.h index d9015aac78c6..3e7919fc5f34 100644 --- a/include/linux/rcupdate_trace.h +++ b/include/linux/rcupdate_trace.h @@ -50,6 +50,7 @@ static inline void rcu_read_lock_trace(void) struct task_struct *t = current; WRITE_ONCE(t->trc_reader_nesting, READ_ONCE(t->trc_reader_nesting) + 1); + barrier(); if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB) && t->trc_reader_special.b.need_mb) smp_mb(); // Pairs with update-side barriers @@ -72,6 +73,9 @@ static inline void rcu_read_unlock_trace(void) rcu_lock_release(&rcu_trace_lock_map); nesting = READ_ONCE(t->trc_reader_nesting) - 1; + barrier(); // Critical section before disabling. + // Disable IPI-based setting of .need_qs. + WRITE_ONCE(t->trc_reader_nesting, INT_MIN); if (likely(!READ_ONCE(t->trc_reader_special.s)) || nesting) { WRITE_ONCE(t->trc_reader_nesting, nesting); return; // We assume shallow reader nesting. @@ -82,7 +86,14 @@ static inline void rcu_read_unlock_trace(void) void call_rcu_tasks_trace(struct rcu_head *rhp, rcu_callback_t func); void synchronize_rcu_tasks_trace(void); void rcu_barrier_tasks_trace(void); - +#else +/* + * The BPF JIT forms these addresses even when it doesn't call these + * functions, so provide definitions that result in runtime errors. + */ +static inline void call_rcu_tasks_trace(struct rcu_head *rhp, rcu_callback_t func) { BUG(); } +static inline void rcu_read_lock_trace(void) { BUG(); } +static inline void rcu_read_unlock_trace(void) { BUG(); } #endif /* #ifdef CONFIG_TASKS_TRACE_RCU */ #endif /* __LINUX_RCUPDATE_TRACE_H */ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 416bf95cd5f2..a828cf99c521 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2548,6 +2548,11 @@ static inline int skb_mac_header_was_set(const struct sk_buff *skb) return skb->mac_header != (typeof(skb->mac_header))~0U; } +static inline void skb_unset_mac_header(struct sk_buff *skb) +{ + skb->mac_header = (typeof(skb->mac_header))~0U; +} + static inline void skb_reset_mac_header(struct sk_buff *skb) { skb->mac_header = skb->data - skb->head; @@ -3568,6 +3573,9 @@ int skb_ensure_writable(struct sk_buff *skb, int write_len); int __skb_vlan_pop(struct sk_buff *skb, u16 *vlan_tci); int skb_vlan_pop(struct sk_buff *skb); int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci); +int skb_eth_pop(struct sk_buff *skb); +int skb_eth_push(struct sk_buff *skb, const unsigned char *dst, + const unsigned char *src); int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto, int mac_len, bool ethernet); int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len, diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h index 1e9ed840b9fc..fec0c5ac1c4f 100644 --- a/include/linux/skmsg.h +++ b/include/linux/skmsg.h @@ -308,6 +308,8 @@ struct sk_psock *sk_psock_init(struct sock *sk, int node); int sk_psock_init_strp(struct sock *sk, struct sk_psock *psock); void sk_psock_start_strp(struct sock *sk, struct sk_psock *psock); void sk_psock_stop_strp(struct sock *sk, struct sk_psock *psock); +void sk_psock_start_verdict(struct sock *sk, struct sk_psock *psock); +void sk_psock_stop_verdict(struct sock *sk, struct sk_psock *psock); int sk_psock_msg_verdict(struct sock *sk, struct sk_psock *psock, struct sk_msg *msg); @@ -340,23 +342,6 @@ static inline void sk_psock_update_proto(struct sock *sk, struct sk_psock *psock, struct proto *ops) { - /* Initialize saved callbacks and original proto only once, since this - * function may be called multiple times for a psock, e.g. when - * psock->progs.msg_parser is updated. - * - * Since we've not installed the new proto, psock is not yet in use and - * we can initialize it without synchronization. - */ - if (!psock->sk_proto) { - struct proto *orig = READ_ONCE(sk->sk_prot); - - psock->saved_unhash = orig->unhash; - psock->saved_close = orig->close; - psock->saved_write_space = sk->sk_write_space; - - psock->sk_proto = orig; - } - /* Pairs with lockless read in sk_clone_lock() */ WRITE_ONCE(sk->sk_prot, ops); } diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h index 15fe980a27ea..0b9ecd8cf979 100644 --- a/include/linux/sock_diag.h +++ b/include/linux/sock_diag.h @@ -25,7 +25,19 @@ void sock_diag_unregister(const struct sock_diag_handler *h); void sock_diag_register_inet_compat(int (*fn)(struct sk_buff *skb, struct nlmsghdr *nlh)); void sock_diag_unregister_inet_compat(int (*fn)(struct sk_buff *skb, struct nlmsghdr *nlh)); -u64 sock_gen_cookie(struct sock *sk); +u64 __sock_gen_cookie(struct sock *sk); + +static inline u64 sock_gen_cookie(struct sock *sk) +{ + u64 cookie; + + preempt_disable(); + cookie = __sock_gen_cookie(sk); + preempt_enable(); + + return cookie; +} + int sock_diag_check_cookie(struct sock *sk, const __u32 *cookie); void sock_diag_save_cookie(struct sock *sk, __u32 *cookie); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index bd964c31d333..628e28903b8b 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -198,5 +198,8 @@ struct plat_stmmacenet_data { int mac_port_sel_speed; bool en_tx_lpi_clockgating; int has_xgmac; + bool vlan_fail_q_en; + u8 vlan_fail_q; + unsigned int eee_usecs_rate; }; #endif diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 14b62d7df942..2f87377e9af7 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -92,6 +92,8 @@ struct tcp_options_received { smc_ok : 1, /* SMC seen on SYN packet */ snd_wscale : 4, /* Window scaling received from sender */ rcv_wscale : 4; /* Window scaling to send to receiver */ + u8 saw_unknown:1, /* Received unknown option */ + unused:7; u8 num_sacks; /* Number of SACK blocks */ u16 user_mss; /* mss requested by user in ioctl */ u16 mss_clamp; /* Maximal mss, negotiated at connection setup */ @@ -132,6 +134,7 @@ struct tcp_request_sock { * FastOpen it's the seq# * after data-in-SYN. */ + u8 syn_tos; }; static inline struct tcp_request_sock *tcp_rsk(const struct request_sock *req) @@ -237,14 +240,13 @@ struct tcp_sock { repair : 1, frto : 1;/* F-RTO (RFC5682) activated in CA_Loss */ u8 repair_queue; - u8 syn_data:1, /* SYN includes data */ + u8 save_syn:2, /* Save headers of SYN packet */ + syn_data:1, /* SYN includes data */ syn_fastopen:1, /* SYN includes Fast Open option */ syn_fastopen_exp:1,/* SYN includes Fast Open exp. option */ syn_fastopen_ch:1, /* Active TFO re-enabling probe */ syn_data_acked:1,/* data in SYN is acked by SYN-ACK */ - save_syn:1, /* Save headers of SYN packet */ - is_cwnd_limited:1,/* forward progress limited by snd_cwnd? */ - syn_smc:1; /* SYN includes SMC */ + is_cwnd_limited:1;/* forward progress limited by snd_cwnd? */ u32 tlp_high_seq; /* snd_nxt at the time of TLP */ u32 tcp_tx_delay; /* delay (in usec) added to TX packets */ @@ -391,6 +393,9 @@ struct tcp_sock { #if IS_ENABLED(CONFIG_MPTCP) bool is_mptcp; #endif +#if IS_ENABLED(CONFIG_SMC) + bool syn_smc; /* SYN includes SMC */ +#endif #ifdef CONFIG_TCP_MD5SIG /* TCP AF-Specific parts; only used by MD5 Signature support so far */ @@ -406,7 +411,7 @@ struct tcp_sock { * socket. Used to retransmit SYNACKs etc. */ struct request_sock __rcu *fastopen_rsk; - u32 *saved_syn; + struct saved_syn *saved_syn; }; enum tsq_enum { @@ -484,6 +489,12 @@ static inline void tcp_saved_syn_free(struct tcp_sock *tp) tp->saved_syn = NULL; } +static inline u32 tcp_saved_syn_len(const struct saved_syn *saved_syn) +{ + return saved_syn->mac_hdrlen + saved_syn->network_hdrlen + + saved_syn->tcp_hdrlen; +} + struct sk_buff *tcp_get_timestamping_opt_stats(const struct sock *sk, const struct sk_buff *orig_skb); |