Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, the drivers/tee and drivers/reset subsystems get merged
  here, with the expected set of smaller updates and some new hardware
  support. The tee subsystem now supports device drivers to be attached
  to a tee, the first example here is a random number driver with its
  implementation in the secure world.

  Three new power domain drivers get added for specific chip families:
   - Broadcom BCM283x chips (used in Raspberry Pi)
   - Qualcomm Snapdragon phone chips
   - Xilinx ZynqMP FPGA SoCs

  One new driver is added to talk to the BPMP firmware on NVIDIA
  Tegra210

  Existing drivers are extended for new SoC variants from NXP, NVIDIA,
  Amlogic and Qualcomm"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
  tee: optee: update optee_msg.h and optee_smc.h to dual license
  tee: add cancellation support to client interface
  dpaa2-eth: configure the cache stashing amount on a queue
  soc: fsl: dpio: configure cache stashing destination
  soc: fsl: dpio: enable frame data cache stashing per software portal
  soc: fsl: guts: make fsl_guts_get_svr() static
  hwrng: make symbol 'optee_rng_id_table' static
  tee: optee: Fix unsigned comparison with less than zero
  hwrng: Fix unsigned comparison with less than zero
  tee: fix possible error pointer ctx dereferencing
  hwrng: optee: Initialize some structs using memset instead of braces
  tee: optee: Initialize some structs using memset instead of braces
  soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
  clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
  soc: qcom: llcc-slice: Fix typos
  qcom: soc: llcc-slice: Consolidate some code
  qcom: soc: llcc-slice: Clear the global drv_data pointer on error
  drivers: soc: xilinx: Add ZynqMP power domain driver
  firmware: xilinx: Add APIs to control node status/power
  dt-bindings: power: Add ZynqMP power domain bindings
  ...

20 files changed, 733 insertions, 17 deletions

diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
new file mode 100644
index 000000000000..87d9c6611682
--- /dev/null
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+#ifndef _DT_BINDINGS_POWER_QCOM_RPMPD_H
+#define _DT_BINDINGS_POWER_QCOM_RPMPD_H
+
+/* SDM845 Power Domain Indexes */
+#define SDM845_EBI	0
+#define SDM845_MX	1
+#define SDM845_MX_AO	2
+#define SDM845_CX	3
+#define SDM845_CX_AO	4
+#define SDM845_LMX	5
+#define SDM845_LCX	6
+#define SDM845_GFX	7
+#define SDM845_MSS	8
+
+/* SDM845 Power Domain performance levels */
+#define RPMH_REGULATOR_LEVEL_RETENTION	16
+#define RPMH_REGULATOR_LEVEL_MIN_SVS	48
+#define RPMH_REGULATOR_LEVEL_LOW_SVS	64
+#define RPMH_REGULATOR_LEVEL_SVS	128
+#define RPMH_REGULATOR_LEVEL_SVS_L1	192
+#define RPMH_REGULATOR_LEVEL_NOM	256
+#define RPMH_REGULATOR_LEVEL_NOM_L1	320
+#define RPMH_REGULATOR_LEVEL_NOM_L2	336
+#define RPMH_REGULATOR_LEVEL_TURBO	384
+#define RPMH_REGULATOR_LEVEL_TURBO_L1	416
+
+/* MSM8996 Power Domain Indexes */
+#define MSM8996_VDDCX		0
+#define MSM8996_VDDCX_AO	1
+#define MSM8996_VDDCX_VFC	2
+#define MSM8996_VDDMX		3
+#define MSM8996_VDDMX_AO	4
+#define MSM8996_VDDSSCX		5
+#define MSM8996_VDDSSCX_VFC	6
+
+#endif
diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
new file mode 100644
index 000000000000..0d9a412fd5e0
--- /dev/null
+++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#ifndef _DT_BINDINGS_ZYNQMP_POWER_H
+#define _DT_BINDINGS_ZYNQMP_POWER_H
+
+#define		PD_USB_0	22
+#define		PD_USB_1	23
+#define		PD_TTC_0	24
+#define		PD_TTC_1	25
+#define		PD_TTC_2	26
+#define		PD_TTC_3	27
+#define		PD_SATA		28
+#define		PD_ETH_0	29
+#define		PD_ETH_1	30
+#define		PD_ETH_2	31
+#define		PD_ETH_3	32
+#define		PD_UART_0	33
+#define		PD_UART_1	34
+#define		PD_SPI_0	35
+#define		PD_SPI_1	36
+#define		PD_I2C_0	37
+#define		PD_I2C_1	38
+#define		PD_SD_0		39
+#define		PD_SD_1		40
+#define		PD_DP		41
+#define		PD_GDMA		42
+#define		PD_ADMA		43
+#define		PD_NAND		44
+#define		PD_QSPI		45
+#define		PD_GPIO		46
+#define		PD_CAN_0	47
+#define		PD_CAN_1	48
+#define		PD_GPU		58
+#define		PD_PCIE		59
+
+#endif
diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h
new file mode 100644
index 000000000000..8063e8314eef
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H
+
+/*	RESET0					*/
+#define RESET_HIU			0
+/*					1	*/
+#define RESET_DOS			2
+/*					3-4	*/
+#define RESET_VIU			5
+#define RESET_AFIFO			6
+#define RESET_VID_PLL_DIV		7
+/*					8-9	*/
+#define RESET_VENC			10
+#define RESET_ASSIST			11
+#define RESET_PCIE_CTRL_A		12
+#define RESET_VCBUS			13
+#define RESET_PCIE_PHY			14
+#define RESET_PCIE_APB			15
+#define RESET_GIC			16
+#define RESET_CAPB3_DECODE		17
+/*					18	*/
+#define RESET_HDMITX_CAPB3		19
+#define RESET_DVALIN_CAPB3		20
+#define RESET_DOS_CAPB3			21
+/*					22	*/
+#define RESET_CBUS_CAPB3		23
+#define RESET_AHB_CNTL			24
+#define RESET_AHB_DATA			25
+#define RESET_VCBUS_CLK81		26
+/*					27-31	*/
+/*	RESET1					*/
+/*					32	*/
+#define RESET_DEMUX			33
+#define RESET_USB			34
+#define RESET_DDR			35
+/*					36	*/
+#define RESET_BT656			37
+#define RESET_AHB_SRAM			38
+/*					39	*/
+#define RESET_PARSER			40
+/*					41	*/
+#define RESET_ISA			42
+#define RESET_ETHERNET			43
+#define RESET_SD_EMMC_A			44
+#define RESET_SD_EMMC_B			45
+#define RESET_SD_EMMC_C			46
+/*					47-60 */
+#define RESET_AUDIO_CODEC		61
+/*					62-63	*/
+/*	RESET2					*/
+/*					64	*/
+#define RESET_AUDIO			65
+#define RESET_HDMITX_PHY		66
+/*					67	*/
+#define RESET_MIPI_DSI_HOST		68
+#define RESET_ALOCKER			69
+#define RESET_GE2D			70
+#define RESET_PARSER_REG		71
+#define RESET_PARSER_FETCH		72
+#define RESET_CTL			73
+#define RESET_PARSER_TOP		74
+/*					75-77	*/
+#define RESET_DVALIN			78
+#define RESET_HDMITX			79
+/*					80-95	*/
+/*	RESET3					*/
+/*					96-95	*/
+#define RESET_DEMUX_TOP			105
+#define RESET_DEMUX_DES_PL		106
+#define RESET_DEMUX_S2P_0		107
+#define RESET_DEMUX_S2P_1		108
+#define RESET_DEMUX_0			109
+#define RESET_DEMUX_1			110
+#define RESET_DEMUX_2			111
+/*					112-127	*/
+/*	RESET4					*/
+/*					128-129	*/
+#define RESET_MIPI_DSI_PHY		130
+/*					131-132	*/
+#define RESET_RDMA			133
+#define RESET_VENCI			134
+#define RESET_VENCP			135
+/*					136	*/
+#define RESET_VDAC			137
+/*					138-139 */
+#define RESET_VDI6			140
+#define RESET_VENCL			141
+#define RESET_I2C_M1			142
+#define RESET_I2C_M2			143
+/*					144-159	*/
+/*	RESET5					*/
+/*					160-191	*/
+/*	RESET6					*/
+#define RESET_GEN			192
+#define RESET_SPICC0			193
+#define RESET_SC			194
+#define RESET_SANA_3			195
+#define RESET_I2C_M0			196
+#define RESET_TS_PLL			197
+#define RESET_SPICC1			198
+#define RESET_STREAM			199
+#define RESET_TS_CPU			200
+#define RESET_UART0			201
+#define RESET_UART1_2			202
+#define RESET_ASYNC0			203
+#define RESET_ASYNC1			204
+#define RESET_SPIFC0			205
+#define RESET_I2C_M3			206
+/*					207-223	*/
+/*	RESET7					*/
+#define RESET_USB_DDR_0			224
+#define RESET_USB_DDR_1			225
+#define RESET_USB_DDR_2			226
+#define RESET_USB_DDR_3			227
+#define RESET_TS_GPU			228
+#define RESET_DEVICE_MMC_ARB		229
+#define RESET_DVALIN_DMC_PIPL		230
+#define RESET_VID_LOCK			231
+#define RESET_NIC_DMC_PIPL		232
+#define RESET_DMC_VPU_PIPL		233
+#define RESET_GE2D_DMC_PIPL		234
+#define RESET_HCODEC_DMC_PIPL		235
+#define RESET_WAVE420_DMC_PIPL		236
+#define RESET_HEVCF_DMC_PIPL		237
+/*					238-255	*/
+
+#endif
diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h
new file mode 100644
index 000000000000..57c592498aa0
--- /dev/null
+++ b/include/dt-bindings/reset/imx8mq-reset.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ */
+
+#ifndef DT_BINDING_RESET_IMX8MQ_H
+#define DT_BINDING_RESET_IMX8MQ_H
+
+#define IMX8MQ_RESET_A53_CORE_POR_RESET0	0
+#define IMX8MQ_RESET_A53_CORE_POR_RESET1	1
+#define IMX8MQ_RESET_A53_CORE_POR_RESET2	2
+#define IMX8MQ_RESET_A53_CORE_POR_RESET3	3
+#define IMX8MQ_RESET_A53_CORE_RESET0		4
+#define IMX8MQ_RESET_A53_CORE_RESET1		5
+#define IMX8MQ_RESET_A53_CORE_RESET2		6
+#define IMX8MQ_RESET_A53_CORE_RESET3		7
+#define IMX8MQ_RESET_A53_DBG_RESET0		8
+#define IMX8MQ_RESET_A53_DBG_RESET1		9
+#define IMX8MQ_RESET_A53_DBG_RESET2		10
+#define IMX8MQ_RESET_A53_DBG_RESET3		11
+#define IMX8MQ_RESET_A53_ETM_RESET0		12
+#define IMX8MQ_RESET_A53_ETM_RESET1		13
+#define IMX8MQ_RESET_A53_ETM_RESET2		14
+#define IMX8MQ_RESET_A53_ETM_RESET3		15
+#define IMX8MQ_RESET_A53_SOC_DBG_RESET		16
+#define IMX8MQ_RESET_A53_L2RESET		17
+#define IMX8MQ_RESET_SW_NON_SCLR_M4C_RST	18
+#define IMX8MQ_RESET_OTG1_PHY_RESET		19
+#define IMX8MQ_RESET_OTG2_PHY_RESET		20
+#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N	21
+#define IMX8MQ_RESET_MIPI_DSI_RESET_N		22
+#define IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N	23
+#define IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N	24
+#define IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N	25
+#define IMX8MQ_RESET_PCIEPHY			26
+#define IMX8MQ_RESET_PCIEPHY_PERST		27
+#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN		28
+#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF	29
+#define IMX8MQ_RESET_HDMI_PHY_APB_RESET		30
+#define IMX8MQ_RESET_DISP_RESET			31
+#define IMX8MQ_RESET_GPU_RESET			32
+#define IMX8MQ_RESET_VPU_RESET			33
+#define IMX8MQ_RESET_PCIEPHY2			34
+#define IMX8MQ_RESET_PCIEPHY2_PERST		35
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN		36
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF	37
+#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET	38
+#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET	39
+#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET	40
+#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET	41
+#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET	42
+#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET	43
+#define IMX8MQ_RESET_DDRC1_PRST			44
+#define IMX8MQ_RESET_DDRC1_CORE_RESET		45
+#define IMX8MQ_RESET_DDRC1_PHY_RESET		46
+#define IMX8MQ_RESET_DDRC2_PRST			47
+#define IMX8MQ_RESET_DDRC2_CORE_RESET		48
+#define IMX8MQ_RESET_DDRC2_PHY_RESET		49
+
+#define IMX8MQ_RESET_NUM			50
+
+#endif
diff --git a/include/dt-bindings/reset/xlnx-zynqmp-resets.h b/include/dt-bindings/reset/xlnx-zynqmp-resets.h
new file mode 100644
index 000000000000..d44525b9f8db
--- /dev/null
+++ b/include/dt-bindings/reset/xlnx-zynqmp-resets.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#ifndef _DT_BINDINGS_ZYNQMP_RESETS_H
+#define _DT_BINDINGS_ZYNQMP_RESETS_H
+
+#define		ZYNQMP_RESET_PCIE_CFG		0
+#define		ZYNQMP_RESET_PCIE_BRIDGE	1
+#define		ZYNQMP_RESET_PCIE_CTRL		2
+#define		ZYNQMP_RESET_DP			3
+#define		ZYNQMP_RESET_SWDT_CRF		4
+#define		ZYNQMP_RESET_AFI_FM5		5
+#define		ZYNQMP_RESET_AFI_FM4		6
+#define		ZYNQMP_RESET_AFI_FM3		7
+#define		ZYNQMP_RESET_AFI_FM2		8
+#define		ZYNQMP_RESET_AFI_FM1		9
+#define		ZYNQMP_RESET_AFI_FM0		10
+#define		ZYNQMP_RESET_GDMA		11
+#define		ZYNQMP_RESET_GPU_PP1		12
+#define		ZYNQMP_RESET_GPU_PP0		13
+#define		ZYNQMP_RESET_GPU		14
+#define		ZYNQMP_RESET_GT			15
+#define		ZYNQMP_RESET_SATA		16
+#define		ZYNQMP_RESET_ACPU3_PWRON	17
+#define		ZYNQMP_RESET_ACPU2_PWRON	18
+#define		ZYNQMP_RESET_ACPU1_PWRON	19
+#define		ZYNQMP_RESET_ACPU0_PWRON	20
+#define		ZYNQMP_RESET_APU_L2		21
+#define		ZYNQMP_RESET_ACPU3		22
+#define		ZYNQMP_RESET_ACPU2		23
+#define		ZYNQMP_RESET_ACPU1		24
+#define		ZYNQMP_RESET_ACPU0		25
+#define		ZYNQMP_RESET_DDR		26
+#define		ZYNQMP_RESET_APM_FPD		27
+#define		ZYNQMP_RESET_SOFT		28
+#define		ZYNQMP_RESET_GEM0		29
+#define		ZYNQMP_RESET_GEM1		30
+#define		ZYNQMP_RESET_GEM2		31
+#define		ZYNQMP_RESET_GEM3		32
+#define		ZYNQMP_RESET_QSPI		33
+#define		ZYNQMP_RESET_UART0		34
+#define		ZYNQMP_RESET_UART1		35
+#define		ZYNQMP_RESET_SPI0		36
+#define		ZYNQMP_RESET_SPI1		37
+#define		ZYNQMP_RESET_SDIO0		38
+#define		ZYNQMP_RESET_SDIO1		39
+#define		ZYNQMP_RESET_CAN0		40
+#define		ZYNQMP_RESET_CAN1		41
+#define		ZYNQMP_RESET_I2C0		42
+#define		ZYNQMP_RESET_I2C1		43
+#define		ZYNQMP_RESET_TTC0		44
+#define		ZYNQMP_RESET_TTC1		45
+#define		ZYNQMP_RESET_TTC2		46
+#define		ZYNQMP_RESET_TTC3		47
+#define		ZYNQMP_RESET_SWDT_CRL		48
+#define		ZYNQMP_RESET_NAND		49
+#define		ZYNQMP_RESET_ADMA		50
+#define		ZYNQMP_RESET_GPIO		51
+#define		ZYNQMP_RESET_IOU_CC		52
+#define		ZYNQMP_RESET_TIMESTAMP		53
+#define		ZYNQMP_RESET_RPU_R50		54
+#define		ZYNQMP_RESET_RPU_R51		55
+#define		ZYNQMP_RESET_RPU_AMBA		56
+#define		ZYNQMP_RESET_OCM		57
+#define		ZYNQMP_RESET_RPU_PGE		58
+#define		ZYNQMP_RESET_USB0_CORERESET	59
+#define		ZYNQMP_RESET_USB1_CORERESET	60
+#define		ZYNQMP_RESET_USB0_HIBERRESET	61
+#define		ZYNQMP_RESET_USB1_HIBERRESET	62
+#define		ZYNQMP_RESET_USB0_APB		63
+#define		ZYNQMP_RESET_USB1_APB		64
+#define		ZYNQMP_RESET_IPI		65
+#define		ZYNQMP_RESET_APM_LPD		66
+#define		ZYNQMP_RESET_RTC		67
+#define		ZYNQMP_RESET_SYSMON		68
+#define		ZYNQMP_RESET_AFI_FM6		69
+#define		ZYNQMP_RESET_LPD_SWDT		70
+#define		ZYNQMP_RESET_FPD		71
+#define		ZYNQMP_RESET_RPU_DBG1		72
+#define		ZYNQMP_RESET_RPU_DBG0		73
+#define		ZYNQMP_RESET_DBG_LPD		74
+#define		ZYNQMP_RESET_DBG_FPD		75
+#define		ZYNQMP_RESET_APLL		76
+#define		ZYNQMP_RESET_DPLL		77
+#define		ZYNQMP_RESET_VPLL		78
+#define		ZYNQMP_RESET_IOPLL		79
+#define		ZYNQMP_RESET_RPLL		80
+#define		ZYNQMP_RESET_GPO3_PL_0		81
+#define		ZYNQMP_RESET_GPO3_PL_1		82
+#define		ZYNQMP_RESET_GPO3_PL_2		83
+#define		ZYNQMP_RESET_GPO3_PL_3		84
+#define		ZYNQMP_RESET_GPO3_PL_4		85
+#define		ZYNQMP_RESET_GPO3_PL_5		86
+#define		ZYNQMP_RESET_GPO3_PL_6		87
+#define		ZYNQMP_RESET_GPO3_PL_7		88
+#define		ZYNQMP_RESET_GPO3_PL_8		89
+#define		ZYNQMP_RESET_GPO3_PL_9		90
+#define		ZYNQMP_RESET_GPO3_PL_10		91
+#define		ZYNQMP_RESET_GPO3_PL_11		92
+#define		ZYNQMP_RESET_GPO3_PL_12		93
+#define		ZYNQMP_RESET_GPO3_PL_13		94
+#define		ZYNQMP_RESET_GPO3_PL_14		95
+#define		ZYNQMP_RESET_GPO3_PL_15		96
+#define		ZYNQMP_RESET_GPO3_PL_16		97
+#define		ZYNQMP_RESET_GPO3_PL_17		98
+#define		ZYNQMP_RESET_GPO3_PL_18		99
+#define		ZYNQMP_RESET_GPO3_PL_19		100
+#define		ZYNQMP_RESET_GPO3_PL_20		101
+#define		ZYNQMP_RESET_GPO3_PL_21		102
+#define		ZYNQMP_RESET_GPO3_PL_22		103
+#define		ZYNQMP_RESET_GPO3_PL_23		104
+#define		ZYNQMP_RESET_GPO3_PL_24		105
+#define		ZYNQMP_RESET_GPO3_PL_25		106
+#define		ZYNQMP_RESET_GPO3_PL_26		107
+#define		ZYNQMP_RESET_GPO3_PL_27		108
+#define		ZYNQMP_RESET_GPO3_PL_28		109
+#define		ZYNQMP_RESET_GPO3_PL_29		110
+#define		ZYNQMP_RESET_GPO3_PL_30		111
+#define		ZYNQMP_RESET_GPO3_PL_31		112
+#define		ZYNQMP_RESET_RPU_LS		113
+#define		ZYNQMP_RESET_PS_ONLY		114
+#define		ZYNQMP_RESET_PL			115
+#define		ZYNQMP_RESET_PS_PL0		116
+#define		ZYNQMP_RESET_PS_PL1		117
+#define		ZYNQMP_RESET_PS_PL2		118
+#define		ZYNQMP_RESET_PS_PL3		119
+
+#endif
diff --git a/include/dt-bindings/soc/bcm2835-pm.h b/include/dt-bindings/soc/bcm2835-pm.h
new file mode 100644
index 000000000000..153d75b8d99f
--- /dev/null
+++ b/include/dt-bindings/soc/bcm2835-pm.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef _DT_BINDINGS_ARM_BCM2835_PM_H
+#define _DT_BINDINGS_ARM_BCM2835_PM_H
+
+#define BCM2835_POWER_DOMAIN_GRAFX		0
+#define BCM2835_POWER_DOMAIN_GRAFX_V3D		1
+#define BCM2835_POWER_DOMAIN_IMAGE		2
+#define BCM2835_POWER_DOMAIN_IMAGE_PERI		3
+#define BCM2835_POWER_DOMAIN_IMAGE_ISP		4
+#define BCM2835_POWER_DOMAIN_IMAGE_H264		5
+#define BCM2835_POWER_DOMAIN_USB		6
+#define BCM2835_POWER_DOMAIN_DSI0		7
+#define BCM2835_POWER_DOMAIN_DSI1		8
+#define BCM2835_POWER_DOMAIN_CAM0		9
+#define BCM2835_POWER_DOMAIN_CAM1		10
+#define BCM2835_POWER_DOMAIN_CCP2TX		11
+#define BCM2835_POWER_DOMAIN_HDMI		12
+
+#define BCM2835_POWER_DOMAIN_COUNT		13
+
+#define BCM2835_RESET_V3D			0
+#define BCM2835_RESET_ISP			1
+#define BCM2835_RESET_H264			2
+
+#define BCM2835_RESET_COUNT			3
+
+#endif /* _DT_BINDINGS_ARM_BCM2835_PM_H */
diff --git a/include/linux/firmware/imx/svc/misc.h b/include/linux/firmware/imx/svc/misc.h
index e21c49aba92f..031dd4d3c766 100644
--- a/include/linux/firmware/imx/svc/misc.h
+++ b/include/linux/firmware/imx/svc/misc.h
@@ -52,4 +52,7 @@ int imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
 int imx_sc_misc_get_control(struct imx_sc_ipc *ipc, u32 resource,
 			    u8 ctrl, u32 *val);
 
+int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32 resource,
+			bool enable, u64 phys_addr);
+
 #endif /* _SC_MISC_API_H */
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 3c3c28eff56a..642dab10f65d 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -28,12 +28,35 @@
 /* SMC SIP service Call Function Identifier Prefix */
 #define PM_SIP_SVC			0xC2000000
 #define PM_GET_TRUSTZONE_VERSION	0xa03
+#define PM_SET_SUSPEND_MODE		0xa02
+#define GET_CALLBACK_DATA		0xa01
 
 /* Number of 32bits values in payload */
 #define PAYLOAD_ARG_CNT	4U
 
+/* Number of arguments for a callback */
+#define CB_ARG_CNT     4
+
+/* Payload size (consists of callback API ID + arguments) */
+#define CB_PAYLOAD_SIZE (CB_ARG_CNT + 1)
+
+#define ZYNQMP_PM_MAX_QOS		100U
+
+/* Node capabilities */
+#define	ZYNQMP_PM_CAPABILITY_ACCESS	0x1U
+#define	ZYNQMP_PM_CAPABILITY_CONTEXT	0x2U
+#define	ZYNQMP_PM_CAPABILITY_WAKEUP	0x4U
+#define	ZYNQMP_PM_CAPABILITY_POWER	0x8U
+
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
+	PM_REQUEST_NODE = 13,
+	PM_RELEASE_NODE,
+	PM_SET_REQUIREMENT,
+	PM_RESET_ASSERT = 17,
+	PM_RESET_GET_STATUS,
+	PM_PM_INIT_FINALIZE = 21,
+	PM_GET_CHIPID = 24,
 	PM_IOCTL = 34,
 	PM_QUERY_DATA,
 	PM_CLOCK_ENABLE,
@@ -75,6 +98,149 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_NUM_CLOCKS = 12,
 };
 
+enum zynqmp_pm_reset_action {
+	PM_RESET_ACTION_RELEASE,
+	PM_RESET_ACTION_ASSERT,
+	PM_RESET_ACTION_PULSE,
+};
+
+enum zynqmp_pm_reset {
+	ZYNQMP_PM_RESET_START = 1000,
+	ZYNQMP_PM_RESET_PCIE_CFG = ZYNQMP_PM_RESET_START,
+	ZYNQMP_PM_RESET_PCIE_BRIDGE,
+	ZYNQMP_PM_RESET_PCIE_CTRL,
+	ZYNQMP_PM_RESET_DP,
+	ZYNQMP_PM_RESET_SWDT_CRF,
+	ZYNQMP_PM_RESET_AFI_FM5,
+	ZYNQMP_PM_RESET_AFI_FM4,
+	ZYNQMP_PM_RESET_AFI_FM3,
+	ZYNQMP_PM_RESET_AFI_FM2,
+	ZYNQMP_PM_RESET_AFI_FM1,
+	ZYNQMP_PM_RESET_AFI_FM0,
+	ZYNQMP_PM_RESET_GDMA,
+	ZYNQMP_PM_RESET_GPU_PP1,
+	ZYNQMP_PM_RESET_GPU_PP0,
+	ZYNQMP_PM_RESET_GPU,
+	ZYNQMP_PM_RESET_GT,
+	ZYNQMP_PM_RESET_SATA,
+	ZYNQMP_PM_RESET_ACPU3_PWRON,
+	ZYNQMP_PM_RESET_ACPU2_PWRON,
+	ZYNQMP_PM_RESET_ACPU1_PWRON,
+	ZYNQMP_PM_RESET_ACPU0_PWRON,
+	ZYNQMP_PM_RESET_APU_L2,
+	ZYNQMP_PM_RESET_ACPU3,
+	ZYNQMP_PM_RESET_ACPU2,
+	ZYNQMP_PM_RESET_ACPU1,
+	ZYNQMP_PM_RESET_ACPU0,
+	ZYNQMP_PM_RESET_DDR,
+	ZYNQMP_PM_RESET_APM_FPD,
+	ZYNQMP_PM_RESET_SOFT,
+	ZYNQMP_PM_RESET_GEM0,
+	ZYNQMP_PM_RESET_GEM1,
+	ZYNQMP_PM_RESET_GEM2,
+	ZYNQMP_PM_RESET_GEM3,
+	ZYNQMP_PM_RESET_QSPI,
+	ZYNQMP_PM_RESET_UART0,
+	ZYNQMP_PM_RESET_UART1,
+	ZYNQMP_PM_RESET_SPI0,
+	ZYNQMP_PM_RESET_SPI1,
+	ZYNQMP_PM_RESET_SDIO0,
+	ZYNQMP_PM_RESET_SDIO1,
+	ZYNQMP_PM_RESET_CAN0,
+	ZYNQMP_PM_RESET_CAN1,
+	ZYNQMP_PM_RESET_I2C0,
+	ZYNQMP_PM_RESET_I2C1,
+	ZYNQMP_PM_RESET_TTC0,
+	ZYNQMP_PM_RESET_TTC1,
+	ZYNQMP_PM_RESET_TTC2,
+	ZYNQMP_PM_RESET_TTC3,
+	ZYNQMP_PM_RESET_SWDT_CRL,
+	ZYNQMP_PM_RESET_NAND,
+	ZYNQMP_PM_RESET_ADMA,
+	ZYNQMP_PM_RESET_GPIO,
+	ZYNQMP_PM_RESET_IOU_CC,
+	ZYNQMP_PM_RESET_TIMESTAMP,
+	ZYNQMP_PM_RESET_RPU_R50,
+	ZYNQMP_PM_RESET_RPU_R51,
+	ZYNQMP_PM_RESET_RPU_AMBA,
+	ZYNQMP_PM_RESET_OCM,
+	ZYNQMP_PM_RESET_RPU_PGE,
+	ZYNQMP_PM_RESET_USB0_CORERESET,
+	ZYNQMP_PM_RESET_USB1_CORERESET,
+	ZYNQMP_PM_RESET_USB0_HIBERRESET,
+	ZYNQMP_PM_RESET_USB1_HIBERRESET,
+	ZYNQMP_PM_RESET_USB0_APB,
+	ZYNQMP_PM_RESET_USB1_APB,
+	ZYNQMP_PM_RESET_IPI,
+	ZYNQMP_PM_RESET_APM_LPD,
+	ZYNQMP_PM_RESET_RTC,
+	ZYNQMP_PM_RESET_SYSMON,
+	ZYNQMP_PM_RESET_AFI_FM6,
+	ZYNQMP_PM_RESET_LPD_SWDT,
+	ZYNQMP_PM_RESET_FPD,
+	ZYNQMP_PM_RESET_RPU_DBG1,
+	ZYNQMP_PM_RESET_RPU_DBG0,
+	ZYNQMP_PM_RESET_DBG_LPD,
+	ZYNQMP_PM_RESET_DBG_FPD,
+	ZYNQMP_PM_RESET_APLL,
+	ZYNQMP_PM_RESET_DPLL,
+	ZYNQMP_PM_RESET_VPLL,
+	ZYNQMP_PM_RESET_IOPLL,
+	ZYNQMP_PM_RESET_RPLL,
+	ZYNQMP_PM_RESET_GPO3_PL_0,
+	ZYNQMP_PM_RESET_GPO3_PL_1,
+	ZYNQMP_PM_RESET_GPO3_PL_2,
+	ZYNQMP_PM_RESET_GPO3_PL_3,
+	ZYNQMP_PM_RESET_GPO3_PL_4,
+	ZYNQMP_PM_RESET_GPO3_PL_5,
+	ZYNQMP_PM_RESET_GPO3_PL_6,
+	ZYNQMP_PM_RESET_GPO3_PL_7,
+	ZYNQMP_PM_RESET_GPO3_PL_8,
+	ZYNQMP_PM_RESET_GPO3_PL_9,
+	ZYNQMP_PM_RESET_GPO3_PL_10,
+	ZYNQMP_PM_RESET_GPO3_PL_11,
+	ZYNQMP_PM_RESET_GPO3_PL_12,
+	ZYNQMP_PM_RESET_GPO3_PL_13,
+	ZYNQMP_PM_RESET_GPO3_PL_14,
+	ZYNQMP_PM_RESET_GPO3_PL_15,
+	ZYNQMP_PM_RESET_GPO3_PL_16,
+	ZYNQMP_PM_RESET_GPO3_PL_17,
+	ZYNQMP_PM_RESET_GPO3_PL_18,
+	ZYNQMP_PM_RESET_GPO3_PL_19,
+	ZYNQMP_PM_RESET_GPO3_PL_20,
+	ZYNQMP_PM_RESET_GPO3_PL_21,
+	ZYNQMP_PM_RESET_GPO3_PL_22,
+	ZYNQMP_PM_RESET_GPO3_PL_23,
+	ZYNQMP_PM_RESET_GPO3_PL_24,
+	ZYNQMP_PM_RESET_GPO3_PL_25,
+	ZYNQMP_PM_RESET_GPO3_PL_26,
+	ZYNQMP_PM_RESET_GPO3_PL_27,
+	ZYNQMP_PM_RESET_GPO3_PL_28,
+	ZYNQMP_PM_RESET_GPO3_PL_29,
+	ZYNQMP_PM_RESET_GPO3_PL_30,
+	ZYNQMP_PM_RESET_GPO3_PL_31,
+	ZYNQMP_PM_RESET_RPU_LS,
+	ZYNQMP_PM_RESET_PS_ONLY,
+	ZYNQMP_PM_RESET_PL,
+	ZYNQMP_PM_RESET_PS_PL0,
+	ZYNQMP_PM_RESET_PS_PL1,
+	ZYNQMP_PM_RESET_PS_PL2,
+	ZYNQMP_PM_RESET_PS_PL3,
+	ZYNQMP_PM_RESET_END = ZYNQMP_PM_RESET_PS_PL3
+};
+
+enum zynqmp_pm_suspend_reason {
+	SUSPEND_POWER_REQUEST = 201,
+	SUSPEND_ALERT,
+	SUSPEND_SYSTEM_SHUTDOWN,
+};
+
+enum zynqmp_pm_request_ack {
+	ZYNQMP_PM_REQUEST_ACK_NO = 1,
+	ZYNQMP_PM_REQUEST_ACK_BLOCKING,
+	ZYNQMP_PM_REQUEST_ACK_NON_BLOCKING,
+};
+
 /**
  * struct zynqmp_pm_query_data - PM query data
  * @qid:	query ID
@@ -91,6 +257,7 @@ struct zynqmp_pm_query_data {
 
 struct zynqmp_eemi_ops {
 	int (*get_api_version)(u32 *version);
+	int (*get_chipid)(u32 *idcode, u32 *version);
 	int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
 	int (*clock_enable)(u32 clock_id);
 	int (*clock_disable)(u32 clock_id);
@@ -102,8 +269,25 @@ struct zynqmp_eemi_ops {
 	int (*clock_setparent)(u32 clock_id, u32 parent_id);
 	int (*clock_getparent)(u32 clock_id, u32 *parent_id);
 	int (*ioctl)(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2, u32 *out);
+	int (*reset_assert)(const enum zynqmp_pm_reset reset,
+			    const enum zynqmp_pm_reset_action assert_flag);
+	int (*reset_get_status)(const enum zynqmp_pm_reset reset, u32 *status);
+	int (*init_finalize)(void);
+	int (*set_suspend_mode)(u32 mode);
+	int (*request_node)(const u32 node,
+			    const u32 capabilities,
+			    const u32 qos,
+			    const enum zynqmp_pm_request_ack ack);
+	int (*release_node)(const u32 node);
+	int (*set_requirement)(const u32 node,
+			       const u32 capabilities,
+			       const u32 qos,
+			       const enum zynqmp_pm_request_ack ack);
 };
 
+int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
+			u32 arg2, u32 arg3, u32 *ret_payload);
+
 #if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
 const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void);
 #else
diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h
index 941b11811f85..1fc0edd71c52 100644
--- a/include/linux/fsl/guts.h
+++ b/include/linux/fsl/guts.h
@@ -135,8 +135,6 @@ struct ccsr_guts {
 	u32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
 } __attribute__ ((packed));
 
-u32 fsl_guts_get_svr(void);
-
 /* Alternate function signal multiplex control */
 #define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
 
diff --git a/include/linux/mfd/bcm2835-pm.h b/include/linux/mfd/bcm2835-pm.h
new file mode 100644
index 000000000000..ed37dc40e82a
--- /dev/null
+++ b/include/linux/mfd/bcm2835-pm.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef BCM2835_MFD_PM_H
+#define BCM2835_MFD_PM_H
+
+#include <linux/regmap.h>
+
+struct bcm2835_pm {
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *asb;
+};
+
+#endif /* BCM2835_MFD_PM_H */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index f9bd2f34b99f..14eaeeb46f41 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -779,4 +779,13 @@ struct typec_device_id {
 	kernel_ulong_t driver_data;
 };
 
+/**
+ * struct tee_client_device_id - tee based device identifier
+ * @uuid: For TEE based client devices we use the device uuid as
+ *        the identifier.
+ */
+struct tee_client_device_id {
+	uuid_t uuid;
+};
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index b895f4e79868..900359342965 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -86,6 +86,8 @@ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
 
 unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
 
+unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp);
+
 bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
 
 int dev_pm_opp_get_opp_count(struct device *dev);
@@ -158,6 +160,11 @@ static inline unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp)
 	return 0;
 }
 
+static inline unsigned int dev_pm_opp_get_level(struct dev_pm_opp *opp)
+{
+	return 0;
+}
+
 static inline bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp)
 {
 	return false;
diff --git a/include/linux/reset/socfpga.h b/include/linux/reset/socfpga.h
new file mode 100644
index 000000000000..b11a2047c342
--- /dev/null
+++ b/include/linux/reset/socfpga.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_RESET_SOCFPGA_H__
+#define __LINUX_RESET_SOCFPGA_H__
+
+void __init socfpga_reset_init(void);
+
+#endif /* __LINUX_RESET_SOCFPGA_H__ */
diff --git a/include/linux/reset/sunxi.h b/include/linux/reset/sunxi.h
new file mode 100644
index 000000000000..1ad7fffb413e
--- /dev/null
+++ b/include/linux/reset/sunxi.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_RESET_SUNXI_H__
+#define __LINUX_RESET_SUNXI_H__
+
+void __init sun6i_reset_init(void);
+
+#endif /* __LINUX_RESET_SUNXI_H__ */
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
index 69c285b1c990..eb71a50b8afc 100644
--- a/include/linux/soc/qcom/llcc-qcom.h
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -162,6 +162,12 @@ int llcc_slice_deactivate(struct llcc_slice_desc *desc);
  */
 int qcom_llcc_probe(struct platform_device *pdev,
 		      const struct llcc_slice_config *table, u32 sz);
+
+/**
+ * qcom_llcc_remove - remove the sct table
+ * @pdev: Platform device pointer
+ */
+int qcom_llcc_remove(struct platform_device *pdev);
 #else
 static inline struct llcc_slice_desc *llcc_slice_getd(u32 uid)
 {
diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h
index 6cfe05893a76..4a49f80e7f71 100644
--- a/include/linux/tee_drv.h
+++ b/include/linux/tee_drv.h
@@ -15,11 +15,14 @@
 #ifndef __TEE_DRV_H
 #define __TEE_DRV_H
 
-#include <linux/types.h>
+#include <linux/device.h>
 #include <linux/idr.h>
 #include <linux/kref.h>
 #include <linux/list.h>
+#include <linux/mod_devicetable.h>
 #include <linux/tee.h>
+#include <linux/types.h>
+#include <linux/uuid.h>
 
 /*
  * The file describes the API provided by the generic TEE driver to the
@@ -47,6 +50,11 @@ struct tee_shm_pool;
  * @releasing:  flag that indicates if context is being released right now.
  *		It is needed to break circular dependency on context during
  *              shared memory release.
+ * @supp_nowait: flag that indicates that requests in this context should not
+ *              wait for tee-supplicant daemon to be started if not present
+ *              and just return with an error code. It is needed for requests
+ *              that arises from TEE based kernel drivers that should be
+ *              non-blocking in nature.
  */
 struct tee_context {
 	struct tee_device *teedev;
@@ -54,6 +62,7 @@ struct tee_context {
 	void *data;
 	struct kref refcount;
 	bool releasing;
+	bool supp_nowait;
 };
 
 struct tee_param_memref {
@@ -526,6 +535,18 @@ int tee_client_invoke_func(struct tee_context *ctx,
 			   struct tee_ioctl_invoke_arg *arg,
 			   struct tee_param *param);
 
+/**
+ * tee_client_cancel_req() - Request cancellation of the previous open-session
+ * or invoke-command operations in a Trusted Application
+ * @ctx:       TEE Context
+ * @arg:       Cancellation arguments, see description of
+ *             struct tee_ioctl_cancel_arg
+ *
+ * Returns < 0 on error else 0 if the cancellation was successfully requested.
+ */
+int tee_client_cancel_req(struct tee_context *ctx,
+			  struct tee_ioctl_cancel_arg *arg);
+
 static inline bool tee_param_is_memref(struct tee_param *param)
 {
 	switch (param->attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) {
@@ -538,4 +559,31 @@ static inline bool tee_param_is_memref(struct tee_param *param)
 	}
 }
 
+extern struct bus_type tee_bus_type;
+
+/**
+ * struct tee_client_device - tee based device
+ * @id:			device identifier
+ * @dev:		device structure
+ */
+struct tee_client_device {
+	struct tee_client_device_id id;
+	struct device dev;
+};
+
+#define to_tee_client_device(d) container_of(d, struct tee_client_device, dev)
+
+/**
+ * struct tee_client_driver - tee client driver
+ * @id_table:		device id table supported by this driver
+ * @driver:		driver structure
+ */
+struct tee_client_driver {
+	const struct tee_client_device_id *id_table;
+	struct device_driver driver;
+};
+
+#define to_tee_client_driver(d) \
+		container_of(d, struct tee_client_driver, driver)
+
 #endif /*__TEE_DRV_H*/
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 4be1aa4435ae..7800e12ee042 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -73,6 +73,8 @@ enum rpi_firmware_property_tag {
 	RPI_FIRMWARE_GET_CUSTOMER_OTP =                       0x00030021,
 	RPI_FIRMWARE_GET_DOMAIN_STATE =                       0x00030030,
 	RPI_FIRMWARE_GET_THROTTLED =                          0x00030046,
+	RPI_FIRMWARE_GET_CLOCK_MEASURED =                     0x00030047,
+	RPI_FIRMWARE_NOTIFY_REBOOT =                          0x00030048,
 	RPI_FIRMWARE_SET_CLOCK_STATE =                        0x00038001,
 	RPI_FIRMWARE_SET_CLOCK_RATE =                         0x00038002,
 	RPI_FIRMWARE_SET_VOLTAGE =                            0x00038003,
@@ -86,6 +88,8 @@ enum rpi_firmware_property_tag {
 	RPI_FIRMWARE_SET_GPIO_CONFIG =                        0x00038043,
 	RPI_FIRMWARE_GET_PERIPH_REG =                         0x00030045,
 	RPI_FIRMWARE_SET_PERIPH_REG =                         0x00038045,
+	RPI_FIRMWARE_GET_POE_HAT_VAL =                        0x00030049,
+	RPI_FIRMWARE_SET_POE_HAT_VAL =                        0x00030050,
 
 
 	/* Dispmanx TAGS */
diff --git a/include/soc/fsl/dpaa2-io.h b/include/soc/fsl/dpaa2-io.h
index 3447fd10a3e6..672cfb58046f 100644
--- a/include/soc/fsl/dpaa2-io.h
+++ b/include/soc/fsl/dpaa2-io.h
@@ -111,9 +111,9 @@ int dpaa2_io_service_enqueue_fq(struct dpaa2_io *d, u32 fqid,
 				const struct dpaa2_fd *fd);
 int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, u32 qdid, u8 prio,
 				u16 qdbin, const struct dpaa2_fd *fd);
-int dpaa2_io_service_release(struct dpaa2_io *d, u32 bpid,
+int dpaa2_io_service_release(struct dpaa2_io *d, u16 bpid,
 			     const u64 *buffers, unsigned int num_buffers);
-int dpaa2_io_service_acquire(struct dpaa2_io *d, u32 bpid,
+int dpaa2_io_service_acquire(struct dpaa2_io *d, u16 bpid,
 			     u64 *buffers, unsigned int num_buffers);
 
 struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames,
diff --git a/include/soc/tegra/bpmp.h b/include/soc/tegra/bpmp.h
index b02f926a0216..45960aa08f4a 100644
--- a/include/soc/tegra/bpmp.h
+++ b/include/soc/tegra/bpmp.h
@@ -23,6 +23,7 @@
 #include <soc/tegra/bpmp-abi.h>
 
 struct tegra_bpmp_clk;
+struct tegra_bpmp_ops;
 
 struct tegra_bpmp_soc {
 	struct {
@@ -32,6 +33,8 @@ struct tegra_bpmp_soc {
 			unsigned int timeout;
 		} cpu_tx, thread, cpu_rx;
 	} channels;
+
+	const struct tegra_bpmp_ops *ops;
 	unsigned int num_resets;
 };
 
@@ -47,6 +50,7 @@ struct tegra_bpmp_channel {
 	struct tegra_bpmp_mb_data *ob;
 	struct completion completion;
 	struct tegra_ivc *ivc;
+	unsigned int index;
 };
 
 typedef void (*tegra_bpmp_mrq_handler_t)(unsigned int mrq,
@@ -63,12 +67,7 @@ struct tegra_bpmp_mrq {
 struct tegra_bpmp {
 	const struct tegra_bpmp_soc *soc;
 	struct device *dev;
-
-	struct {
-		struct gen_pool *pool;
-		dma_addr_t phys;
-		void *virt;
-	} tx, rx;
+	void *priv;
 
 	struct {
 		struct mbox_client client;
@@ -173,6 +172,8 @@ static inline bool tegra_bpmp_mrq_is_supported(struct tegra_bpmp *bpmp,
 }
 #endif
 
+void tegra_bpmp_handle_rx(struct tegra_bpmp *bpmp);
+
 #if IS_ENABLED(CONFIG_CLK_TEGRA_BPMP)
 int tegra_bpmp_init_clocks(struct tegra_bpmp *bpmp);
 #else
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index a9db1b501de1..b32ee5d82dd4 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -161,7 +161,6 @@ enum tegra_io_pad {
 #define TEGRA_IO_RAIL_LVDS	TEGRA_IO_PAD_LVDS
 
 #ifdef CONFIG_SOC_TEGRA_PMC
-int tegra_powergate_is_powered(unsigned int id);
 int tegra_powergate_power_on(unsigned int id);
 int tegra_powergate_power_off(unsigned int id);
 int tegra_powergate_remove_clamping(unsigned int id);
@@ -182,11 +181,6 @@ void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
 void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);
 
 #else
-static inline int tegra_powergate_is_powered(unsigned int id)
-{
-	return -ENOSYS;
-}
-
 static inline int tegra_powergate_power_on(unsigned int id)
 {
 	return -ENOSYS;