diff options
| author |   Sam Edwards <cfsworks@gmail.com> | 2024-10-09 14:54:54 -0700 |
|---|---|---|
| committer |   Florian Fainelli <florian.fainelli@broadcom.com> | 2024-12-17 11:39:21 -0800 |
| commit | 5c1ae7729e7bf3c7dc4d36cae0133f04fd232747 (patch) | |
| tree | c26dbab1ae5797387127b9a86f880fe1f662d86f /scripts/gdb/linux/utils.py | |
| parent | dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906 (diff) | |
| download | wireguard-linux-5c1ae7729e7bf3c7dc4d36cae0133f04fd232747.tar.xz wireguard-linux-5c1ae7729e7bf3c7dc4d36cae0133f04fd232747.zip | |
arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B
Zyxel EX3510-B is a WiFi 6 capable home gateway (family) based on the
BCM4906 SoC, with 512MiB of RAM and 512MiB of NAND flash. WiFi support
consists of a BCM6710 and a BCM6715 attached to separate PCIe buses.
Add an initial devicetree for this system, with support for:
- Onboard UART (per base dtsi)
- USB (2.0 only; superspeed devices are treated as high-speed due to an
unknown cause)
- Both buttons (rear reset, front WPS)
- Almost all LEDs:
- Power (red/green)
- Internet (red/green)
- WAN (green)
- LAN (green; anode is connected to GPIO 13 so currently
nonfunctioning)
- USB (green)
- WPS button (red/green)
- Absent in DT: There are 2.4GHz/5.0GHz WiFi status LEDs connected to
the WiFi chips instead of the SoC.
- NAND flash
- Embedded Ethernet switch
- Factory-programmed Ethernet MAC address
WiFi cannot be enabled at this time due to Linux lacking drivers for
both the PCIe controllers and the PCIe WiFi peripherals.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20241009215454.1449508-3-CFSworks@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Diffstat (limited to 'scripts/gdb/linux/utils.py')
0 files changed, 0 insertions, 0 deletions