diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/boot/dts/rk3288-veyron-fievel.dts | 58 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3288-veyron-tiger.dts | 7 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3288-veyron.dtsi | 4 |
3 files changed, 38 insertions, 31 deletions
diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts index 696566f72d30..65d029ccc907 100644 --- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts +++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts @@ -20,11 +20,11 @@ /delete-node/ bt-activity; - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; }; /* @@ -41,7 +41,7 @@ vcc5_host1: vcc5-host1-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio5 RK_PC1 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hub_usb1_pwr_en>; regulator-name = "vcc5_host1"; @@ -52,7 +52,7 @@ vcc5_host2: vcc5-host2-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hub_usb2_pwr_en>; regulator-name = "vcc5_host2"; @@ -70,6 +70,13 @@ regulator-always-on; regulator-boot-on; }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; }; &gmac { @@ -83,13 +90,13 @@ phy-supply = <&vcc33_lan>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; - resets = <&cru SRST_MAC>; - reset-names = "stmmaceth"; rx_delay = <0x10>; tx_delay = <0x30>; - /* Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low) - * with a 30ms settling time. */ + /* + * Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low) + * with a 30ms settling time. + */ snps,reset-gpio = <&gpio4 RK_PB0 0>; snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -120,7 +127,8 @@ regulators { /delete-node/ LDO_REG1; - /* According to the schematic, vcc18_lcdt is for + /* + * According to the schematic, vcc18_lcdt is for * HDMI_AVDD_1V8 */ vcc18_lcdt: LDO_REG2 { @@ -130,12 +138,12 @@ regulator-max-microvolt = <1800000>; regulator-name = "vdd18_lcdt"; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; + regulator-off-in-suspend; }; }; - /* This is not a pwren anymore, but the real power supply, + /* + * This is not a pwren anymore, but the real power supply, * vdd10_lcd for HDMI_AVDD_1V0 */ vdd10_lcd: LDO_REG7 { @@ -145,8 +153,7 @@ regulator-max-microvolt = <1000000>; regulator-name = "vdd10_lcd"; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; + regulator-off-in-suspend; }; }; @@ -158,8 +165,7 @@ regulator-max-microvolt = <3300000>; regulator-name = "vcc33_ccd"; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; + regulator-off-in-suspend; }; }; @@ -180,7 +186,7 @@ interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>; marvell,wakeup-pin = /bits/ 16 <13>; pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake>; + pinctrl-0 = <&bt_host_wake_l>; }; }; @@ -206,13 +212,13 @@ &ddrio_pwroff &global_pwroff - /* Wake only */ - &bt_dev_wake_awake - &pwr_led1_on - /* For usb bc1.2 */ &usb_otg_ilim_sel &usb_usb_ilim_sel + + /* Wake only */ + &bt_dev_wake_awake + &pwr_led1_on >; pinctrl-1 = < @@ -221,6 +227,10 @@ &ddrio_pwroff &global_pwroff + /* For usb bc1.2 */ + &usb_otg_ilim_sel + &usb_usb_ilim_sel + /* Sleep only */ &bt_dev_wake_sleep &pwr_led1_blink diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts index fae26d530841..27557203ae33 100644 --- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -19,13 +19,6 @@ "google,veyron", "rockchip,rk3288"; /delete-node/ vcc18-lcd; - - vccsys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vccsys"; - regulator-boot-on; - regulator-always-on; - }; }; &backlight { diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 8fc8eac699bf..7525e3dd1fc1 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -586,6 +586,10 @@ rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; }; + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + /* * We run sdio0 at max speed; bump up drive strength. * We also have external pulls, so disable the internal ones. |