diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/boot/dts/pxa300-raumfeld-common.dtsi | 6 | ||||
| -rw-r--r-- | arch/arm/boot/dts/pxa300-raumfeld-controller.dts | 21 | ||||
| -rw-r--r-- | arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts | 3 | ||||
| -rw-r--r-- | arch/arm/boot/dts/pxa3xx.dtsi | 8 |
4 files changed, 34 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi index 8ac24e3c8513..8a6721d436bd 100644 --- a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi +++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi @@ -319,9 +319,9 @@ gpio_keys_pins: gpio-keys-pins { pinctrl-single,pins = < - MFP_PIN_PXA300(14) MFP_AF0 /* SCK */ - MFP_PIN_PXA300(115) MFP_AF0 /* MOSI */ - MFP_PIN_PXA300(119) MFP_AF0 /* MISO */ + MFP_PIN_PXA300(14) MFP_AF0 /* on-off */ + MFP_PIN_PXA300(115) MFP_AF0 /* rescue boot */ + MFP_PIN_PXA300(119) MFP_AF0 /* setup */ >; pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); }; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts index 65d825091f0d..12b15945ac6d 100644 --- a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts +++ b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts @@ -41,6 +41,8 @@ }; charger: charger { + pinctrl-names = "default"; + pinctrl-0 = <&charger_pins>; compatible = "gpio-charger"; charger-type = "mains"; gpios = <&gpio 101 GPIO_ACTIVE_LOW>; @@ -109,9 +111,10 @@ }; &keys { + pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>; dock-detect { label = "dock detect"; - gpios = <&gpio 116 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 116 GPIO_ACTIVE_LOW>; linux,code = <KEY_F5>; }; }; @@ -236,6 +239,22 @@ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); }; + charger_pins: charger_pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(31) MFP_AF0 /* PEN2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + pinctrl-single,bias-pullup = MPF_PULL_UP; + }; + + dock_detect_pins: dock_detect_pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(116) MFP_AF0 /* DOCK_DETECT */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + pinctrl-single,bias-pullup = MPF_PULL_UP; + }; + lcdc_pins: lcdc-pins { pinctrl-single,pins = < MFP_PIN_PXA300(54) MFP_AF1 /* LDD_0 */ diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts index 5f9e37585a28..a70560a8ea92 100644 --- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts @@ -116,6 +116,9 @@ st,invalid-input-detect-mute; /* 2 (half-bridge) and 1 (full-bridge) on-board power */ st,output-conf = /bits/ 8 <0x1>; + st,ch1-output-mapping = /bits/ 8 <0>; + st,ch2-output-mapping = /bits/ 8 <1>; + st,ch3-output-mapping = /bits/ 8 <2>; st,needs_esd_watchdog; }; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index e1e607f53ce6..c237a0e4b12a 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -71,6 +71,14 @@ #define MFP_DS13X < (0x7 << 10) MFP_DSMSK > /* + * MFP bias pull mode for pins. + * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP; + */ +#define MPF_PULL_MSK (0x7 << 13) +#define MPF_PULL_DOWN < (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK > +#define MPF_PULL_UP < (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK > + +/* * MFP low power mode for pins. * Example of use: * pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL); |