aboutsummaryrefslogtreecommitdiffstatshomepage
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts100
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-ifc6410.dts136
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi175
-rw-r--r--arch/arm/boot/dts/qcom-msm8660.dtsi5
-rw-r--r--arch/arm/boot/dts/qcom-pm8841.dtsi18
-rw-r--r--arch/arm/boot/dts/qcom-pm8941.dtsi133
-rw-r--r--arch/arm/boot/dts/qcom-pma8084.dtsi92
7 files changed, 649 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 5d75666f7f6c..71512b3ca444 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -14,6 +14,67 @@
};
};
+ rpm@108000 {
+ regulators {
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <4800000>;
+ };
+
+ pm8921_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3050000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+ };
+ };
+
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
@@ -40,6 +101,45 @@
};
};
+ /* OTG */
+ usb1_phy: phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ usb3_phy: phy@12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb4_phy: phy@12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ gadget1: gadget@12500000 {
+ status = "ok";
+ };
+
+ /* OTG */
+ usb1: usb@12500000 {
+ status = "ok";
+ };
+
+ usb3: usb@12520000 {
+ status = "okay";
+ };
+
+ usb4: usb@12530000 {
+ status = "okay";
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index e641001ca2a7..a7c939ba8873 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -5,15 +5,12 @@
model = "Qualcomm APQ8064/IFC6410";
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+ aliases {
+ serial0 = &gsbi7_serial;
+ };
+
soc {
pinctrl@800000 {
- i2c1_pins: i2c1 {
- mux {
- pins = "gpio20", "gpio21";
- function = "gsbi1";
- };
- };
-
card_detect: card_detect {
mux {
pins = "gpio26";
@@ -23,6 +20,83 @@
};
};
+ rpm@108000 {
+ regulators {
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <4800000>;
+ };
+
+ pm8921_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3050000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+ };
+ };
+
+ gsbi3: gsbi@16200000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+ i2c3: i2c@16280000 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
@@ -49,6 +123,54 @@
};
};
+ sata_phy0: phy@1b400000 {
+ status = "okay";
+ };
+
+ sata0: sata@29000000 {
+ status = "okay";
+ target-supply = <&pm8921_s4>;
+ };
+
+ /* OTG */
+ usb1_phy: phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ usb3_phy: phy@12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb4_phy: phy@12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ gadget1: gadget@12500000 {
+ status = "okay";
+ };
+
+ /* OTG */
+ usb1: usb@12500000 {
+ status = "okay";
+ };
+
+ usb3: usb@12520000 {
+ status = "okay";
+ };
+
+ usb4: usb@12530000 {
+ status = "okay";
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 6c1511263a55..df2061ec630d 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -2,6 +2,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -112,6 +113,20 @@
function = "ps_hold";
};
};
+
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+
+ i2c3_pins: i2c3 {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "gsbi3";
+ };
+ };
};
intc: interrupt-controller@2000000 {
@@ -225,6 +240,26 @@
};
};
+ gsbi3: gsbi@16200000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x16200000 0x100>;
+ clocks = <&gcc GSBI3_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ i2c3: i2c@16280000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16280000 0x1000>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI3_QUP_CLK>,
+ <&gcc GSBI3_H_CLK>;
+ clock-names = "core", "iface";
+ };
+ };
+
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
@@ -235,10 +270,9 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
-
syscon-tcsr = <&tcsr>;
- serial@16640000 {
+ gsbi7_serial: serial@16640000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
@@ -276,6 +310,143 @@
#reset-cells = <1>;
};
+ l2cc: clock-controller@2011000 {
+ compatible = "syscon";
+ reg = <0x2011000 0x1000>;
+ };
+
+ rpm@108000 {
+ compatible = "qcom,rpm-apq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
+ pm8921_hdmi_switch: hdmi-switch {
+ bias-pull-down;
+ };
+ };
+ };
+
+ usb1_phy: phy@12500000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12500000 0x400>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS1_XCVR_CLK>,
+ <&gcc USB_HS1_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS1_RESET>;
+ reset-names = "link";
+ };
+
+ usb3_phy: phy@12520000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12520000 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS3_XCVR_CLK>,
+ <&gcc USB_HS3_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS3_RESET>;
+ reset-names = "link";
+ };
+
+ usb4_phy: phy@12530000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12530000 0x400>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS4_XCVR_CLK>,
+ <&gcc USB_HS4_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS4_RESET>;
+ reset-names = "link";
+ };
+
+ gadget1: gadget@12500000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x12500000 0x400>;
+ status = "disabled";
+ dr_mode = "peripheral";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ usb-phy = <&usb1_phy>;
+ };
+
+ usb1: usb@12500000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12500000 0x400>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb1_phy>;
+ };
+
+ usb3: usb@12520000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12520000 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb3_phy>;
+ };
+
+ usb4: usb@12530000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12530000 0x400>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb4_phy>;
+ };
+
+ sata_phy0: phy@1b400000 {
+ compatible = "qcom,apq8064-sata-phy";
+ status = "disabled";
+ reg = <0x1b400000 0x200>;
+ reg-names = "phy_mem";
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+ #phy-cells = <0>;
+ };
+
+ sata0: sata@29000000 {
+ compatible = "generic-ahci";
+ status = "disabled";
+ reg = <0x29000000 0x180>;
+ interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_iface",
+ "iface",
+ "bus",
+ "rxoob",
+ "core_pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ };
+
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 20bbd19b996e..e0b2ce2910e0 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -37,6 +37,11 @@
};
};
+ cpu-pmu {
+ compatible = "qcom,scorpion-mp-pmu";
+ interrupts = <1 9 0x304>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
index 73813cc118f9..8f1a0b162017 100644
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -1,3 +1,4 @@
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
@@ -7,6 +8,23 @@
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8841_mpps: mpps@a000 {
+ compatible = "qcom,pm8841-mpp";
+ reg = <0xa000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
+ <4 0xa1 0 IRQ_TYPE_NONE>,
+ <4 0xa2 0 IRQ_TYPE_NONE>,
+ <4 0xa3 0 IRQ_TYPE_NONE>;
+ };
+
+ temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ };
};
usid5: pm8841@5 {
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 24c5088acea2..aa774e685018 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
@@ -7,12 +9,141 @@
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x100>,
+ <0x6100 0x100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pwrkey@800 {
+ compatible = "qcom,pm8941-pwrkey";
+ reg = <0x800 0x100>;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+
+ pm8941_gpios: gpios@c000 {
+ compatible = "qcom,pm8941-gpio";
+ reg = <0xc000 0x2400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>,
+ <0 0xce 0 IRQ_TYPE_NONE>,
+ <0 0xcf 0 IRQ_TYPE_NONE>,
+ <0 0xd0 0 IRQ_TYPE_NONE>,
+ <0 0xd1 0 IRQ_TYPE_NONE>,
+ <0 0xd2 0 IRQ_TYPE_NONE>,
+ <0 0xd3 0 IRQ_TYPE_NONE>,
+ <0 0xd4 0 IRQ_TYPE_NONE>,
+ <0 0xd5 0 IRQ_TYPE_NONE>,
+ <0 0xd6 0 IRQ_TYPE_NONE>,
+ <0 0xd7 0 IRQ_TYPE_NONE>,
+ <0 0xd8 0 IRQ_TYPE_NONE>,
+ <0 0xd9 0 IRQ_TYPE_NONE>,
+ <0 0xda 0 IRQ_TYPE_NONE>,
+ <0 0xdb 0 IRQ_TYPE_NONE>,
+ <0 0xdc 0 IRQ_TYPE_NONE>,
+ <0 0xdd 0 IRQ_TYPE_NONE>,
+ <0 0xde 0 IRQ_TYPE_NONE>,
+ <0 0xdf 0 IRQ_TYPE_NONE>,
+ <0 0xe0 0 IRQ_TYPE_NONE>,
+ <0 0xe1 0 IRQ_TYPE_NONE>,
+ <0 0xe2 0 IRQ_TYPE_NONE>,
+ <0 0xe3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8941_mpps: mpps@a000 {
+ compatible = "qcom,pm8941-mpp";
+ reg = <0xa000 0x800>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>,
+ <0 0xa4 0 IRQ_TYPE_NONE>,
+ <0 0xa5 0 IRQ_TYPE_NONE>,
+ <0 0xa6 0 IRQ_TYPE_NONE>,
+ <0 0xa7 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8941_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8941_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+
+ pm8941_iadc: iadc@3600 {
+ compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+ reg = <0x3600 0x100>,
+ <0x12f1 0x1>;
+ interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+ qcom,external-resistor-micro-ohms = <10000>;
+ };
};
usid1: pm8941@1 {
- compatible ="qcom,spmi-pmic";
+ compatible = "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ wled@d800 {
+ compatible = "qcom,pm8941-wled";
+ reg = <0xd800 0x100>;
+ label = "backlight";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index a5a4fe695a46..5e240ccc08b7 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
@@ -7,6 +9,96 @@
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x100>,
+ <0x6100 0x100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pma8084_gpios: gpios@c000 {
+ compatible = "qcom,pma8084-gpio";
+ reg = <0xc000 0x1600>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>,
+ <0 0xce 0 IRQ_TYPE_NONE>,
+ <0 0xcf 0 IRQ_TYPE_NONE>,
+ <0 0xd0 0 IRQ_TYPE_NONE>,
+ <0 0xd1 0 IRQ_TYPE_NONE>,
+ <0 0xd2 0 IRQ_TYPE_NONE>,
+ <0 0xd3 0 IRQ_TYPE_NONE>,
+ <0 0xd4 0 IRQ_TYPE_NONE>,
+ <0 0xd5 0 IRQ_TYPE_NONE>;
+ };
+
+ pma8084_mpps: mpps@a000 {
+ compatible = "qcom,pma8084-mpp";
+ reg = <0xa000 0x800>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>,
+ <0 0xa4 0 IRQ_TYPE_NONE>,
+ <0 0xa5 0 IRQ_TYPE_NONE>,
+ <0 0xa6 0 IRQ_TYPE_NONE>,
+ <0 0xa7 0 IRQ_TYPE_NONE>;
+ };
+
+ pma8084_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ };
+
+ pma8084_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_buf_625mv {
+ reg = <VADC_SPARE1>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
};
usid1: pma8084@1 {
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.