diff options
135 files changed, 3779 insertions, 1944 deletions
diff --git a/Documentation/devicetree/bindings/arm/vexpress-scc.txt b/Documentation/devicetree/bindings/arm/vexpress-scc.txt new file mode 100644 index 000000000000..ae5043e42e5d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vexpress-scc.txt @@ -0,0 +1,33 @@ +ARM Versatile Express Serial Configuration Controller +----------------------------------------------------- + +Test chips for ARM Versatile Express platform implement SCC (Serial +Configuration Controller) interface, used to set initial conditions +for the test chip. + +In some cases its registers are also mapped in normal address space +and can be used to obtain runtime information about the chip internals +(like silicon temperature sensors) and as interface to other subsystems +like platform configuration control and power management. + +Required properties: + +- compatible value: "arm,vexpress-scc,<model>", "arm,vexpress-scc"; + where <model> is the full tile model name (as used + in the tile's Technical Reference Manual), + eg. for Coretile Express A15x2 A7x3 (V2P-CA15_A7): + compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc"; + +Optional properties: + +- reg: when the SCC is memory mapped, physical address and size of the + registers window +- interrupts: when the SCC can generate a system-level interrupt + +Example: + + scc@7fff0000 { + compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc"; + reg = <0 0x7fff0000 0 0x1000>; + interrupts = <0 95 4>; + }; diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt new file mode 100644 index 000000000000..7586fb68c072 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt @@ -0,0 +1,276 @@ + +* Marvell MBus + +Required properties: + +- compatible: Should be set to one of the following: + marvell,armada370-mbus + marvell,armadaxp-mbus + marvell,armada370-mbus + marvell,armadaxp-mbus + marvell,kirkwood-mbus + marvell,dove-mbus + marvell,orion5x-88f5281-mbus + marvell,orion5x-88f5182-mbus + marvell,orion5x-88f5181-mbus + marvell,orion5x-88f6183-mbus + marvell,mv78xx0-mbus + +- address-cells: Must be '2'. The first cell for the MBus ID encoding, + the second cell for the address offset within the window. + +- size-cells: Must be '1'. + +- ranges: Must be set up to provide a proper translation for each child. + See the examples below. + +- controller: Contains a single phandle referring to the MBus controller + node. This allows to specify the node that contains the + registers that control the MBus, which is typically contained + within the internal register window (see below). + +Optional properties: + +- pcie-mem-aperture: This optional property contains the aperture for + the memory region of the PCIe driver. + If it's defined, it must encode the base address and + size for the address decoding windows allocated for + the PCIe memory region. + +- pcie-io-aperture: Just as explained for the above property, this + optional property contains the aperture for the + I/O region of the PCIe driver. + +* Marvell MBus controller + +Required properties: + +- compatible: Should be set to "marvell,mbus-controller". + +- reg: Device's register space. + Two entries are expected (see the examples below): + the first one controls the devices decoding window and + the second one controls the SDRAM decoding window. + +Example: + + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x8000000>; + pcie-io-aperture = <0xe8000000 0x100000>; + + internal-regs { + compatible = "simple-bus"; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + /* more children ...*/ + }; + }; + +** MBus address decoding window specification + +The MBus children address space is comprised of two cells: the first one for +the window ID and the second one for the offset within the window. +In order to allow to describe valid and non-valid window entries, the +following encoding is used: + + 0xSIAA0000 0x00oooooo + +Where: + + S = 0x0 for a MBus valid window + S = 0xf for a non-valid window (see below) + +If S = 0x0, then: + + I = 4-bit window target ID + AA = windpw attribute + +If S = 0xf, then: + + I = don't care + AA = 1 for internal register + +Following the above encoding, for each ranges entry for a MBus valid window +(S = 0x0), an address decoding window is allocated. On the other side, +entries for translation that do not correspond to valid windows (S = 0xf) +are skipped. + + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + + ranges = <0xf0010000 0 0 0xd0000000 0x100000 + 0x01e00000 0 0 0xfff00000 0x100000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = <0x01e00000 0 0x100000>; + }; + + /* other children */ + ... + + internal-regs { + compatible = "simple-bus"; + ranges = <0 0xf0010000 0 0x100000>; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + /* more children ...*/ + }; + }; + +In the shown example, the translation entry in the 'ranges' property is what +makes the MBus driver create a static decoding window for the corresponding +given child device. Note that the binding does not require child nodes to be +present. Of course, child nodes are needed to probe the devices. + +Since each window is identified by its target ID and attribute ID there's +a special macro that can be use to simplify the translation entries: + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + +Using this macro, the above example would be: + + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + + ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>; + }; + + /* other children */ + ... + + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + /* other children */ + ... + }; + }; + + +** About the window base address + +Remember the MBus controller allows a great deal of flexibility for choosing +the decoding window base address. When planning the device tree layout it's +possible to choose any address as the base address, provided of course there's +a region large enough available, and with the required alignment. + +Yet in other words: there's nothing preventing us from setting a base address +of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is +unused. + +** Window allocation policy + +The mbus-node ranges property defines a set of mbus windows that are expected +to be set by the operating system and that are guaranteed to be free of overlaps +with one another or with the system memory ranges. + +Each entry in the property refers to exactly one window. If the operating system +choses to use a different set of mbus windows, it must ensure that any address +translations performed from downstream devices are adapted accordingly. + +The operating system may insert additional mbus windows that do not conflict +with the ones listed in the ranges, e.g. for mapping PCIe devices. +As a special case, the internal register window must be set up by the boot +loader at the address listed in the ranges property, since access to that region +is needed to set up the other windows. + +** Example + +See the example below, where a more complete device tree is shown: + + soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + controller = <&mbusc>; + + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 /* internal-regs */ + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>; + + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>; + }; + + devbus-bootcs { + status = "okay"; + ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>; + + /* NOR */ + nor { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "okay"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */ + 0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>; + + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + mbusc: mbus-controller@20000 { + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + interrupt-controller@20000 { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index f8d405897a94..9556e2fedf6d 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -1,6 +1,7 @@ * Marvell EBU PCIe interfaces Mandatory properties: + - compatible: one of the following values: marvell,armada-370-pcie marvell,armada-xp-pcie @@ -10,11 +11,49 @@ Mandatory properties: - #interrupt-cells, set to <1> - bus-range: PCI bus numbers covered - device_type, set to "pci" -- ranges: ranges for the PCI memory and I/O regions, as well as the - MMIO registers to control the PCIe interfaces. +- ranges: ranges describing the MMIO registers to control the PCIe + interfaces, and ranges describing the MBus windows needed to access + the memory and I/O regions of each PCIe interface. + +The ranges describing the MMIO registers have the following layout: + + 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s + +where: + + * r is a 32-bits value that gives the offset of the MMIO + registers of this PCIe interface, from the base of the internal + registers. + + * s is a 32-bits value that give the size of this MMIO + registers area. This range entry translates the '0x82000000 0 r' PCI + address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part + of the internal register window (as identified by MBUS_ID(0xf0, + 0x01)). + +The ranges describing the MBus windows have the following layout: + + 0x8t000000 s 0 MBUS_ID(w, a) 0 1 0 + +where: + + * t is the type of the MBus window (as defined by the standard PCI DT + bindings), 1 for I/O and 2 for memory. -In addition, the Device Tree node must have sub-nodes describing each + * s is the PCI slot that corresponds to this PCIe interface + + * w is the 'target ID' value for the MBus window + + * a the 'attribute' value for the MBus window. + +Since the location and size of the different MBus windows is not fixed in +hardware, and only determined in runtime, those ranges cover the full first +4 GB of the physical address space, and do not translate into a valid CPU +address. + +In addition, the device tree node must have sub-nodes describing each PCIe interface, having the following mandatory properties: + - reg: used only for interrupt mapping, so only the first four bytes are used to refer to the correct bus number and device number. - assigned-addresses: reference to the MMIO registers used to control @@ -26,7 +65,8 @@ PCIe interface, having the following mandatory properties: - #address-cells, set to <3> - #size-cells, set to <2> - #interrupt-cells, set to <1> -- ranges, empty property. +- ranges, translating the MBus windows ranges of the parent node into + standard PCI addresses. - interrupt-map-mask and interrupt-map, standard PCI properties to define the mapping of the PCIe interface to interrupt numbers. @@ -47,27 +87,50 @@ pcie-controller { bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */ - 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */ - 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ + + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; pcie@1,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 58>; marvell,pcie-port = <0>; @@ -78,12 +141,13 @@ pcie-controller { pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -94,12 +158,13 @@ pcie-controller { pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 60>; marvell,pcie-port = <0>; @@ -110,12 +175,13 @@ pcie-controller { pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 61>; marvell,pcie-port = <0>; @@ -126,12 +192,13 @@ pcie-controller { pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 62>; marvell,pcie-port = <1>; @@ -142,12 +209,13 @@ pcie-controller { pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 63>; marvell,pcie-port = <1>; @@ -158,12 +226,13 @@ pcie-controller { pcie@7,0 { device_type = "pci"; - assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 64>; marvell,pcie-port = <1>; @@ -174,12 +243,13 @@ pcie-controller { pcie@8,0 { device_type = "pci"; - assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 65>; marvell,pcie-port = <1>; @@ -187,14 +257,16 @@ pcie-controller { clocks = <&gateclk 12>; status = "disabled"; }; + pcie@9,0 { device_type = "pci"; - assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 99>; marvell,pcie-port = <2>; @@ -205,12 +277,13 @@ pcie-controller { pcie@10,0 { device_type = "pci"; - assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>; + assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; reg = <0x5000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 103>; marvell,pcie-port = <3>; diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S index e2d636336b7c..e7f80928949c 100644 --- a/arch/arm/boot/compressed/head-shmobile.S +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -55,12 +55,47 @@ __tmp_stack: __continue: #endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ - /* Set board ID necessary for boot */ - ldr r7, 1f @ Set machine type register - mov r8, #0 @ pass null pointer as atag + adr r0, dtb_info + ldmia r0, {r1, r3, r4, r5, r7} + + sub r0, r0, r1 @ calculate the delta offset + add r5, r5, r0 @ _edata + + ldr lr, [r5, #0] @ check if valid DTB is present + cmp lr, r3 + bne 0f + + add r9, r7, #31 @ rounded up to a multiple + bic r9, r9, #31 @ ... of 32 bytes + + add r6, r9, r5 @ copy from _edata + add r9, r9, r4 @ to MEMORY_START + +1: ldmdb r6!, {r0 - r3, r10 - r12, lr} + cmp r6, r5 + stmdb r9!, {r0 - r3, r10 - r12, lr} + bhi 1b + + /* Success: Zero board ID, pointer to start of memory for atag/dtb */ + mov r7, #0 + mov r8, r4 b 2f -1 : .long MACH_TYPE + .align 2 +dtb_info: + .word dtb_info +#ifndef __ARMEB__ + .word 0xedfe0dd0 @ sig is 0xd00dfeed big endian +#else + .word 0xd00dfeed +#endif + .word MEMORY_START + .word _edata + .word 0x4000 @ maximum DTB size +0: + /* Failure: Zero board ID, NULL atag/dtb */ + mov r7, #0 + mov r8, #0 @ pass null pointer as atag 2 : #endif /* CONFIG_ZBOOT_ROM */ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 641b3c9a7028..1d94303d4416 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-rd.dtb \ + armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ armada-xp-openblocks-ax3-4.dtb @@ -183,6 +184,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ + emev2-kzm9d-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7740-armadillo800eva-reference.dtb \ diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index beee1699d49e..90ce29dbe119 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -14,7 +14,7 @@ */ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "Marvell Armada 370 Evaluation Board"; @@ -30,6 +30,9 @@ }; soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + internal-regs { serial@12000 { clock-frequency = <200000000>; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 45b107763e3b..2471d9da767b 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "Globalscale Mirabox"; @@ -25,6 +25,25 @@ }; soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected on the PCB to a USB 3.0 XHCI controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { clock-frequency = <200000000>; @@ -120,22 +139,6 @@ reg = <0x25>; }; }; - - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected on the PCB to a USB 3.0 XHCI controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index a3a2fedb8726..f81810a59629 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "armada-370.dtsi" +#include "armada-370.dtsi" / { model = "Marvell Armada 370 Reference Design"; @@ -28,6 +28,25 @@ }; soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Internal mini-PCIe connector */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { clock-frequency = <200000000>; @@ -85,22 +104,6 @@ gpios = <&gpio0 6 1>; }; }; - - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Internal mini-PCIe connector */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 90b117624abb..e984ce6bb33f 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -18,6 +18,8 @@ /include/ "skeleton64.dtsi" +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + / { model = "Marvell Armada 370 and XP SoC"; compatible = "marvell,armada-370-xp"; @@ -38,18 +40,73 @@ }; soc { - #address-cells = <1>; + #address-cells = <2>; #size-cells = <1>; - compatible = "simple-bus"; + controller = <&mbusc>; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; + pcie-mem-aperture = <0xe0000000 0x8000000>; + pcie-io-aperture = <0xe8000000 0x100000>; + + devbus-bootcs { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; + ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs0 { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; + ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs1 { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; + ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs2 { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; + ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + devbus-cs3 { + compatible = "marvell,mvebu-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; + ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; internal-regs { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; mpic: interrupt-controller@20000 { compatible = "marvell,mpic"; @@ -195,50 +252,6 @@ status = "disabled"; }; - devbus-bootcs@10400 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10400 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs0@10408 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10408 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs1@10410 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10410 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs2@10418 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10418 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - devbus-cs3@10420 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10420 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index fa3dfc6b4c6a..648e5303446e 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -15,7 +15,7 @@ * common to all Armada SoCs. */ -/include/ "armada-370-xp.dtsi" +#include "armada-370-xp.dtsi" /include/ "skeleton.dtsi" / { @@ -29,8 +29,66 @@ }; soc { - ranges = <0 0xd0000000 0x0100000 /* internal registers */ - 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; + compatible = "marvell,armada370-mbus", "simple-bus"; + + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>; + }; + + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + }; + internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; @@ -169,54 +227,6 @@ 0x18304 0x4>; status = "okay"; }; - - pcie-controller { - compatible = "marvell,armada-370-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts new file mode 100644 index 000000000000..c5fe57269f5a --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -0,0 +1,164 @@ +/* + * Device Tree file for Marvell RD-AXPWiFiAP. + * + * Note: this board is shipped with a new generation boot loader that + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk + * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be + * used. + * + * Copyright (C) 2013 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Marvell RD-AXPWiFiAP"; + compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* First mini-PCIe port */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Renesas uPD720202 USB 3.0 controller */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + }; + + internal-regs { + pinctrl { + pinctrl-0 = <&pmx_phy_int>; + pinctrl-names = "default"; + + pmx_ge0: pmx-ge0 { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", + "mpp16", "mpp17", "mpp18", "mpp19", + "mpp20", "mpp21", "mpp22", "mpp23"; + marvell,function = "ge1"; + }; + + pmx_keys: pmx-keys { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + pmx_spi: pmx-spi { + marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; + marvell,function = "spi"; + }; + + pmx_phy_int: pmx-phy-int { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; + }; + + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata@a0000 { + nr-ports = <1>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@70000 { + pinctrl-0 = <&pmx_ge0>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + spi0: spi@10600 { + status = "okay"; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_keys>; + pinctrl-names = "default"; + + button@1 { + label = "Factory Reset Button"; + linux,code = <141>; /* KEY_SETUP */ + gpios = <&gpio1 1 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index e28e68ff864d..bcf6d79a57ec 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -14,7 +14,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78460.dtsi" +#include "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Evaluation Board"; @@ -30,9 +30,70 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */ + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + + devbus-bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * All 6 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 0, Lane 2 */ + status = "okay"; + }; + pcie@4,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; internal-regs { serial@12000 { @@ -127,68 +188,6 @@ spi-max-frequency = <20000000>; }; }; - - pcie-controller { - status = "okay"; - - /* - * All 6 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - pcie@3,0 { - /* Port 0, Lane 2 */ - status = "okay"; - }; - pcie@4,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x1000000>; - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 16 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x1000000>; - bank-width = <2>; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index c87b2de29c30..2298e4a910e2 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -14,7 +14,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78460.dtsi" +#include "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Development Board DB-MV784MP-GP"; @@ -39,9 +39,58 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>; + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + + devbus-bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; internal-regs { serial@12000 { @@ -126,56 +175,6 @@ spi-max-frequency = <108000000>; }; }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 16 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x1000000>; - bank-width = <2>; - }; - }; - - pcie-controller { - status = "okay"; - - /* - * The 3 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index f8eaa383e07f..e45e363cc9b9 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78230 SoC"; @@ -44,6 +44,124 @@ }; soc { + /* + * MV78230 has 2 PCIe units Gen2.0: One unit can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78230-pinctrl"; @@ -77,110 +195,6 @@ #interrupts-cells = <2>; interrupts = <87>, <88>, <89>; }; - - /* - * MV78230 has 2 PCIe units Gen2.0: One unit can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - -#address-cells = <3>; -#size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 2d9335da210c..6dc3921df9b3 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78260 SoC"; @@ -45,6 +45,145 @@ }; soc { + /* + * MV78260 has 3 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78260-pinctrl"; @@ -97,128 +236,6 @@ clocks = <&gateclk 1>; status = "disabled"; }; - - /* - * MV78260 has 3 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index c7b1f4d5c1c7..a6661e3aea23 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -13,7 +13,7 @@ * common to all Armada XP SoCs. */ -/include/ "armada-xp.dtsi" +#include "armada-xp.dtsi" / { model = "Marvell Armada XP MV78460 SoC"; @@ -61,6 +61,227 @@ }; soc { + /* + * MV78460 has 4 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. Two units are + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ + + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78460-pinctrl"; @@ -113,194 +334,6 @@ clocks = <&gateclk 1>; status = "disabled"; }; - - /* - * MV78460 has 4 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. Two units are - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ - 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ - 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@5,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x2800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; - }; - - pcie@6,0 { - device_type = "pci"; - assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; - reg = <0x3000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 10>; - status = "disabled"; - }; - - pcie@7,0 { - device_type = "pci"; - assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 11>; - status = "disabled"; - }; - - pcie@8,0 { - device_type = "pci"; - assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; - reg = <0x4000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 12>; - status = "disabled"; - }; - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 8f510458ea86..5695afcc04bf 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -11,7 +11,7 @@ */ /dts-v1/; -/include/ "armada-xp-mv78260.dtsi" +#include "armada-xp-mv78260.dtsi" / { model = "PlatHome OpenBlocks AX3-4 board"; @@ -27,9 +27,46 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ - 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>; + + devbus-bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 128 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; internal-regs { serial@12000 { @@ -148,49 +185,6 @@ usb@51000 { status = "okay"; }; - - /* USB interface in the mini-PCIe connector */ - usb@52000 { - status = "okay"; - }; - - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 128 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x8000000>; - bank-width = <2>; - }; - }; - - pcie-controller { - status = "okay"; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 416eb9481844..7ba99ce107bb 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -16,7 +16,7 @@ * common to all Armada SoCs. */ -/include/ "armada-370-xp.dtsi" +#include "armada-370-xp.dtsi" / { model = "Marvell Armada XP family SoC"; @@ -27,6 +27,13 @@ }; soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + + bootrom { + compatible = "marvell,bootrom"; + reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>; + }; + internal-regs { L2: l2-cache { compatible = "marvell,aurora-system-cache"; diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts new file mode 100644 index 000000000000..bed676b95c27 --- /dev/null +++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts @@ -0,0 +1,57 @@ +/* + * Device Tree Source for the KZM9D board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +/dts-v1/; + +/include/ "emev2.dtsi" + +/ { + model = "EMEV2 KZM9D Board"; + compatible = "renesas,kzm9d-reference", "renesas,emev2"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + lan9220@20000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x20000000 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpio0>; + interrupts = <1 1>; /* active high */ + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index b9b3241f173b..dda13bc02f9f 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -21,6 +21,6 @@ }; chosen { - bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; + bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index c8a8c08b48dd..99ad2b2e8e14 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -14,6 +14,14 @@ compatible = "renesas,emev2"; interrupt-parent = <&gic>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -67,4 +75,55 @@ reg = <0xe1050000 0x38>; interrupts = <0 11 0>; }; + + gpio0: gpio@e0050000 { + compatible = "renesas,em-gio"; + reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; + interrupts = <0 67 0>, <0 68 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio1: gpio@e0050080 { + compatible = "renesas,em-gio"; + reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; + interrupts = <0 69 0>, <0 70 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio2: gpio@e0050100 { + compatible = "renesas,em-gio"; + reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; + interrupts = <0 71 0>, <0 72 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio3: gpio@e0050180 { + compatible = "renesas,em-gio"; + reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; + interrupts = <0 73 0>, <0 74 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpio4: gpio@e0050200 { + compatible = "renesas,em-gio"; + reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; + interrupts = <0 75 0>, <0 76 0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <31>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 1e5bef0bead7..650ef30e1856 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,4 +1,39 @@ / { + mbus { + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { compatible = "marvell,88f6281-pinctrl"; @@ -41,37 +76,6 @@ }; }; - pcie-controller { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - }; - rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index a63a11137262..3933a331ddc2 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,4 +1,59 @@ / { + mbus { + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 10>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 18>; + status = "disabled"; + }; + }; + }; ocp@f1000000 { pinctrl: pinctrl@10000 { @@ -94,52 +149,5 @@ status = "disabled"; }; - pcie-controller { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x00044000 0x00044000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 10>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 18>; - status = "disabled"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 00c48d26de68..9bf139c5a34d 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "LaCie CloudBox"; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index 9d777edd1f36..72c4b0a0366f 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -11,14 +11,15 @@ /dts-v1/; -/include/ "kirkwood-db.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood-db.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Marvell DB-88F6281-BP Development Board"; compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - ocp@f1000000 { + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts index f4c852886d23..36c411d34926 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -11,14 +11,15 @@ /dts-v1/; -/include/ "kirkwood-db.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood-db.dtsi" +#include "kirkwood-6282.dtsi" / { model = "Marvell DB-88F6282-BP Development Board"; compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - ocp@f1000000 { + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index c87cfb816120..45c1bf74ac00 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -12,7 +12,7 @@ * and 6282 variants of the Marvell Kirkwood Development Board. */ -/include/ "kirkwood.dtsi" +#include "kirkwood.dtsi" / { memory { @@ -77,13 +77,5 @@ cd-gpios = <&gpio1 6 0>; status = "okay"; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 14d4ceea3057..e112ca62d978 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-dnskw.dtsi" +#include "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-320 NAS (Rev A1)"; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 63872570e6ce..5119fb8a8eb6 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-dnskw.dtsi" +#include "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-325 NAS (Rev A1)"; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 0afe1d07c803..2e04284846a0 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "D-Link DNS NASes (kirkwood-based)"; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 7714742bb8d8..4387ae8e93fe 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Seagate FreeAgent Dockstar"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 36c7ba38d500..c62837837246 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Dreamplug"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 31caa6405065..e57118039277 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Seagate GoFlex Net"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 1e642f39b154..2c5673adb4bd 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Guruplug Server Plus"; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 20c4b081f420..158161ff6826 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 441204e8abc6..8314118b6b8a 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Iomega Iconnect"; @@ -18,6 +18,17 @@ linux,initrd-end = <0x4800000>; }; + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pmx_button_reset: pmx-button-reset { @@ -101,14 +112,6 @@ reg = <0x980000 0x1f400000>; }; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 00a7bfe5e83b..fd7f053e9c96 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "Iomega StorCenter ix2-200"; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts index c3f036b86cca..bd88a236f729 100644 --- a/arch/arm/boot/dts/kirkwood-is2.dts +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Internet Space v2"; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 5d9f5ea78700..b071d37cc291 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-98dx4122.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-98dx4122.dtsi" / { model = "Keymile Kirkwood Reference Design"; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts index 9f55d95f35f5..e2fa368aef25 100644 --- a/arch/arm/boot/dts/kirkwood-lschlv2.dts +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-lsxl.dtsi" +#include "kirkwood-lsxl.dtsi" / { model = "Buffalo Linkstation LS-CHLv2"; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts index 5c84c118ed8d..8d89cdf8d6bf 100644 --- a/arch/arm/boot/dts/kirkwood-lsxhl.dts +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-lsxl.dtsi" +#include "kirkwood-lsxl.dtsi" / { model = "Buffalo Linkstation LS-XHL"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 31b17f5b9d28..f7e247cc925a 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { chosen { diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 6179333fd71f..21f1954c9e54 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "MPL CEC4"; @@ -16,6 +16,17 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pmx_led_health: pmx-led-health { @@ -134,14 +145,6 @@ cd-gpios = <&gpio1 15 1>; /* No WP GPIO */ }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index ad6ade7d9191..84ff31cfbcdc 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" / { model = "NETGEAR ReadyNAS Duo v2"; @@ -16,6 +16,17 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pmx_button_power: pmx-button-power { @@ -101,14 +112,6 @@ status = "okay"; nr-ports = <2>; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 2afac0405816..d0fb34dc1667 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,5 +1,5 @@ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { chosen { diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts index b50e93d7796c..0599f3cb844e 100644 --- a/arch/arm/boot/dts/kirkwood-ns2.dts +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Network Space v2"; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index af8259fe8955..b0e17984aea0 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Network Space Lite v2"; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts index 85f24d227e17..d4f6a586d553 100644 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { model = "LaCie Network Space Max v2"; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index 329e530bffe7..f30e05af6473 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood-ns2-common.dtsi" +#include "kirkwood-ns2-common.dtsi" / { /* This machine is embedded in the first LaCie CloudBox product. */ diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 69003598f5fa..bd7f05f6aa96 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { model = "ZyXEL NSA310"; @@ -16,6 +16,17 @@ bootargs = "console=ttyS0,115200"; }; + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { pinctrl-0 = <&pmx_unknown>; @@ -162,14 +173,6 @@ reg = <0x5040000 0x2fc0000>; }; }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio_keys { diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 38dc8517d777..365b792b23a7 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" / { model = "Plat'Home OpenBlocksA6"; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index f7143f128504..0cc5f26bbbb6 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -6,8 +6,8 @@ * Licensed under GPLv2 */ -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" / { memory { diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts index f620ce48de97..eac6a21f3b1f 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -8,7 +8,7 @@ /dts-v1/; -/include/ "kirkwood-sheevaplug-common.dtsi" +#include "kirkwood-sheevaplug-common.dtsi" / { model = "Globalscale Technologies eSATA SheevaPlug"; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts index bf1dff251432..bb61918313db 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -8,7 +8,7 @@ /dts-v1/; -/include/ "kirkwood-sheevaplug-common.dtsi" +#include "kirkwood-sheevaplug-common.dtsi" / { model = "Globalscale Technologies SheevaPlug"; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index f2052d7bc10f..974f1e0f09b2 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -1,7 +1,7 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" / { model = "Univeral Scientific Industrial Co. Topkick-1281P2"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 6dd1038e4de4..3867ae3030be 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -1,8 +1,8 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" -/include/ "kirkwood-ts219.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-ts219.dtsi" / { ocp@f1000000 { diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 6fdc5ffcaae5..04f6fe106bb5 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -1,10 +1,21 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6282.dtsi" -/include/ "kirkwood-ts219.dtsi" +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" +#include "kirkwood-ts219.dtsi" / { + mbus { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>; + pcie-controller { + status = "okay"; + + pcie@2,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { pinctrl: pinctrl@10000 { @@ -30,14 +41,6 @@ marvell,function = "gpio"; }; }; - pcie-controller { - status = "okay"; - - pcie@2,0 { - status = "okay"; - }; - }; - }; gpio_keys { diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 0c9a94cd666c..7019cf675df2 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -11,6 +11,16 @@ bootargs = "console=ttyS0,115200n8"; }; + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + ocp@f1000000 { i2c@11000 { status = "okay"; @@ -87,12 +97,5 @@ status = "okay"; nr-ports = <2>; }; - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 9809fc1f105c..70f414d9bd9a 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,5 +1,7 @@ /include/ "skeleton.dtsi" +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + / { compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; @@ -28,15 +30,28 @@ <0xf1020214 0x04>; }; + mbus { + compatible = "marvell,kirkwood-mbus", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + controller = <&mbusc>; + pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ + pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ + }; + ocp@f1000000 { compatible = "simple-bus"; ranges = <0x00000000 0xf1000000 0x0100000 - 0xe0000000 0xe0000000 0x8100000 /* PCIE */ 0xf4000000 0xf4000000 0x0000400 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x1500 0x20>; + }; + core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index f603c6946c29..e657a9db1666 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -50,3 +50,25 @@ }; }; }; + +&i2c5 { + vdd_dvfs: max8973@1b { + compatible = "maxim,max8973"; + reg = <0x1b>; + + regulator-min-microvolt = <935000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; + operating-points = < + /* kHz uV */ + 1950000 1115000 + 1462500 995000 + >; + voltage-tolerance = <1>; /* 1% */ +}; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 4ff2019c0e30..6ce699be6095 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -85,4 +85,130 @@ interrupt-parent = <&gic>; interrupts = <0 69 4>; }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 174 0x4>; + }; + + i2c1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 175 0x4>; + }; + + i2c2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 176 0x4>; + }; + + i2c3: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6530000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 177 0x4>; + }; + + i2c4: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6540000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 178 0x4>; + }; + + i2c5: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 179 0x4>; + }; + + i2c6: i2c@e6550000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6550000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 184 0x4>; + }; + + i2c7: i2c@e6560000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6560000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 185 0x4>; + }; + + i2c8: i2c@e6570000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe6570000 0 0x428>; + interrupt-parent = <&gic>; + interrupts = <0 173 0x4>; + }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a73a4-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 339d9b11721c..9cd882028095 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -54,4 +54,58 @@ interrupt-parent = <&gic>; interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; }; + + mmcif0: mmcif@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 169 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmcif@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupt-parent = <&gic>; + interrupts = <0 170 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@ee100000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee100000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 165 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi1: sdhi@ee120000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee120000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 166 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@ee140000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 167 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi3: sdhi@ee160000 { + compatible = "renesas,r8a7790-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 168 4>; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index d2803be4e1a8..759b0cd20013 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -125,6 +125,12 @@ clock-names = "apb_pclk"; }; + scc@7fff0000 { + compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc"; + reg = <0 0x7fff0000 0 0x1000>; + interrupts = <0 95 4>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 13 0xf08>, diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 00247c771313..bc22056200ae 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -27,6 +27,22 @@ #include <plat/time.h> #include "common.h" +/* These can go away once Dove uses the mvebu-mbus DT binding */ +#define DOVE_MBUS_PCIE0_MEM_TARGET 0x4 +#define DOVE_MBUS_PCIE0_MEM_ATTR 0xe8 +#define DOVE_MBUS_PCIE0_IO_TARGET 0x4 +#define DOVE_MBUS_PCIE0_IO_ATTR 0xe0 +#define DOVE_MBUS_PCIE1_MEM_TARGET 0x8 +#define DOVE_MBUS_PCIE1_MEM_ATTR 0xe8 +#define DOVE_MBUS_PCIE1_IO_TARGET 0x8 +#define DOVE_MBUS_PCIE1_IO_ATTR 0xe0 +#define DOVE_MBUS_CESA_TARGET 0x3 +#define DOVE_MBUS_CESA_ATTR 0x1 +#define DOVE_MBUS_BOOTROM_TARGET 0x1 +#define DOVE_MBUS_BOOTROM_ATTR 0xfd +#define DOVE_MBUS_SCRATCHPAD_TARGET 0xd +#define DOVE_MBUS_SCRATCHPAD_ATTR 0x0 + /***************************************************************************** * I/O Address Mapping ****************************************************************************/ @@ -332,34 +348,40 @@ void __init dove_setup_cpu_wins(void) { /* * The PCIe windows will no longer be statically allocated - * here once Dove is migrated to the pci-mvebu driver. + * here once Dove is migrated to the pci-mvebu driver. The + * non-PCIe windows will no longer be created here once Dove + * fully moves to DT. */ - mvebu_mbus_add_window_remap_flags("pcie0.0", + mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE0_IO_TARGET, + DOVE_MBUS_PCIE0_IO_ATTR, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE, - DOVE_PCIE0_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie1.0", + DOVE_PCIE0_IO_BUS_BASE); + mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE1_IO_TARGET, + DOVE_MBUS_PCIE1_IO_ATTR, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE, - DOVE_PCIE1_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie0.0", - DOVE_PCIE0_MEM_PHYS_BASE, - DOVE_PCIE0_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window_remap_flags("pcie1.0", - DOVE_PCIE1_MEM_PHYS_BASE, - DOVE_PCIE1_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE, - DOVE_CESA_SIZE); - mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE, - DOVE_BOOTROM_SIZE); - mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE, - DOVE_SCRATCHPAD_SIZE); + DOVE_PCIE1_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE0_MEM_TARGET, + DOVE_MBUS_PCIE0_MEM_ATTR, + DOVE_PCIE0_MEM_PHYS_BASE, + DOVE_PCIE0_MEM_SIZE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE1_MEM_TARGET, + DOVE_MBUS_PCIE1_MEM_ATTR, + DOVE_PCIE1_MEM_PHYS_BASE, + DOVE_PCIE1_MEM_SIZE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_CESA_TARGET, + DOVE_MBUS_CESA_ATTR, + DOVE_CESA_PHYS_BASE, + DOVE_CESA_SIZE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_BOOTROM_TARGET, + DOVE_MBUS_BOOTROM_ATTR, + DOVE_BOOTROM_PHYS_BASE, + DOVE_BOOTROM_SIZE); + mvebu_mbus_add_window_by_id(DOVE_MBUS_SCRATCHPAD_TARGET, + DOVE_MBUS_SCRATCHPAD_ATTR, + DOVE_SCRATCHPAD_PHYS_BASE, + DOVE_SCRATCHPAD_SIZE); } void __init dove_init(void) diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 6e122ed3282f..682b7ac8deb8 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -87,6 +87,7 @@ static void __init kirkwood_dt_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + BUG_ON(mvebu_mbus_dt_init()); kirkwood_setup_wins(); kirkwood_l2_init(); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index e9238b5567ee..15b7e72e890b 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -37,6 +37,12 @@ #include <linux/platform_data/dma-mv_xor.h> #include "common.h" +/* These can go away once Kirkwood uses the mvebu-mbus DT binding */ +#define KIRKWOOD_MBUS_NAND_TARGET 0x01 +#define KIRKWOOD_MBUS_NAND_ATTR 0x2f +#define KIRKWOOD_MBUS_SRAM_TARGET 0x03 +#define KIRKWOOD_MBUS_SRAM_ATTR 0x01 + /***************************************************************************** * I/O Address Mapping ****************************************************************************/ @@ -528,10 +534,6 @@ void __init kirkwood_cpuidle_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - - mvebu_mbus_init("marvell,kirkwood-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); } int kirkwood_tclk; @@ -672,10 +674,14 @@ char * __init kirkwood_id(void) void __init kirkwood_setup_wins(void) { - mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE, - KIRKWOOD_NAND_MEM_SIZE); - mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE, - KIRKWOOD_SRAM_SIZE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET, + KIRKWOOD_MBUS_NAND_ATTR, + KIRKWOOD_NAND_MEM_PHYS_BASE, + KIRKWOOD_NAND_MEM_SIZE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET, + KIRKWOOD_MBUS_SRAM_ATTR, + KIRKWOOD_SRAM_PHYS_BASE, + KIRKWOOD_SRAM_SIZE); } void __init kirkwood_l2_init(void) @@ -703,6 +709,10 @@ void __init kirkwood_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ)); + kirkwood_setup_wins(); kirkwood_l2_init(); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ddcb09f5bdd3..12d86f39f380 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -20,6 +20,16 @@ #include <mach/bridge-regs.h> #include "common.h" +/* These can go away once Kirkwood uses the mvebu-mbus DT binding */ +#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8 +#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0 +#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8 +#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0 + static void kirkwood_enable_pcie_clk(const char *port) { struct clk *clk; @@ -254,26 +264,24 @@ static void __init add_pcie_port(int index, void __iomem *base) void __init kirkwood_pcie_init(unsigned int portmask) { - mvebu_mbus_add_window_remap_flags("pcie0.0", + mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET, + KIRKWOOD_MBUS_PCIE0_IO_ATTR, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, - KIRKWOOD_PCIE_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie0.0", - KIRKWOOD_PCIE_MEM_PHYS_BASE, - KIRKWOOD_PCIE_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window_remap_flags("pcie1.0", + KIRKWOOD_PCIE_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET, + KIRKWOOD_MBUS_PCIE0_MEM_ATTR, + KIRKWOOD_PCIE_MEM_PHYS_BASE, + KIRKWOOD_PCIE_MEM_SIZE); + mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET, + KIRKWOOD_MBUS_PCIE1_IO_ATTR, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, - KIRKWOOD_PCIE1_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie1.0", - KIRKWOOD_PCIE1_MEM_PHYS_BASE, - KIRKWOOD_PCIE1_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); + KIRKWOOD_PCIE1_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET, + KIRKWOOD_MBUS_PCIE1_MEM_ATTR, + KIRKWOOD_PCIE1_MEM_PHYS_BASE, + KIRKWOOD_PCIE1_MEM_SIZE); vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE; diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index dc26a654c496..445e553f4a28 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -18,6 +18,11 @@ #include <mach/mv78xx0.h> #include "common.h" +#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4) +#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane) (0xf8 & ~(0x10 << (lane))) +#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane) ((port) ? 8 : 4) +#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane) (0xf0 & ~(0x10 << (lane))) + struct pcie_port { u8 maj; u8 min; @@ -71,7 +76,6 @@ static void __init mv78xx0_pcie_preinit(void) start = MV78XX0_PCIE_MEM_PHYS_BASE; for (i = 0; i < num_pcie_ports; i++) { struct pcie_port *pp = pcie_port + i; - char winname[MVEBU_MBUS_MAX_WINNAME_SZ]; snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d.%d MEM", pp->maj, pp->min); @@ -85,17 +89,12 @@ static void __init mv78xx0_pcie_preinit(void) if (request_resource(&iomem_resource, &pp->res)) panic("can't allocate PCIe MEM sub-space"); - snprintf(winname, sizeof(winname), "pcie%d.%d", - pp->maj, pp->min); - - mvebu_mbus_add_window_remap_flags(winname, - pp->res.start, - resource_size(&pp->res), - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window_remap_flags(winname, - i * SZ_64K, SZ_64K, - 0, MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min), + MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min), + pp->res.start, resource_size(&pp->res)); + mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min), + MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min), + i * SZ_64K, SZ_64K, 0); } } diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 97cbb8021919..829b57306328 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -34,44 +34,12 @@ static void __init armada_370_xp_map_io(void) debug_ll_io_init(); } -/* - * This initialization will be replaced by a DT-based - * initialization once the mvebu-mbus driver gains DT support. - */ - -#define ARMADA_370_XP_MBUS_WINS_OFFS 0x20000 -#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100 -#define ARMADA_370_XP_SDRAM_WINS_OFFS 0x20180 -#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20 - -static void __init armada_370_xp_mbus_init(void) -{ - char *mbus_soc_name; - struct device_node *dn; - const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS); - const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS); - - if (of_machine_is_compatible("marvell,armada370")) - mbus_soc_name = "marvell,armada370-mbus"; - else - mbus_soc_name = "marvell,armadaxp-mbus"; - - dn = of_find_node_by_name(NULL, "internal-regs"); - BUG_ON(!dn); - - mvebu_mbus_init(mbus_soc_name, - of_translate_address(dn, &mbus_wins_offs), - ARMADA_370_XP_MBUS_WINS_SIZE, - of_translate_address(dn, &sdram_wins_offs), - ARMADA_370_XP_SDRAM_WINS_SIZE); -} - static void __init armada_370_xp_timer_and_clk_init(void) { of_clk_init(NULL); armada_370_xp_timer_init(); coherency_init(); - armada_370_xp_mbus_init(); + BUG_ON(mvebu_mbus_dt_init()); #ifdef CONFIG_CACHE_L2X0 l2x0_of_init(0, ~0UL); #endif diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index ce81d3031405..c6b00fce6d8d 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -21,6 +21,7 @@ #include <linux/smp.h> #include <linux/clk.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/mbus.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -29,6 +30,9 @@ #include "pmsu.h" #include "coherency.h" +#define AXP_BOOTROM_BASE 0xfff00000 +#define AXP_BOOTROM_SIZE 0x100000 + void __init set_secondary_cpus_clock(void) { int thiscpu; @@ -114,10 +118,29 @@ static void __init armada_xp_smp_init_cpus(void) void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) { + struct device_node *node; + struct resource res; + int err; + set_secondary_cpus_clock(); flush_cache_all(); set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); - mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M); + + /* + * In order to boot the secondary CPUs we need to ensure + * the bootROM is mapped at the correct address. + */ + node = of_find_compatible_node(NULL, NULL, "marvell,bootrom"); + if (!node) + panic("Cannot find 'marvell,bootrom' compatible node"); + + err = of_address_to_resource(node, 0, &res); + if (err < 0) + panic("Cannot get 'bootrom' node address"); + + if (res.start != AXP_BOOTROM_BASE || + resource_size(&res) != AXP_BOOTROM_SIZE) + panic("The address for the BootROM is incorrect"); } struct smp_operations armada_xp_smp_ops __initdata = { diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b41599f98a8e..91a5852b44f3 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -174,8 +174,10 @@ void __init orion5x_xor_init(void) ****************************************************************************/ static void __init orion5x_crypto_init(void) { - mvebu_mbus_add_window("sram", ORION5X_SRAM_PHYS_BASE, - ORION5X_SRAM_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_SRAM_TARGET, + ORION_MBUS_SRAM_ATTR, + ORION5X_SRAM_PHYS_BASE, + ORION5X_SRAM_SIZE); orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE, SZ_8K, IRQ_ORION5X_CESA); } @@ -222,22 +224,24 @@ void orion5x_setup_wins(void) * The PCIe windows will no longer be statically allocated * here once Orion5x is migrated to the pci-mvebu driver. */ - mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_IO_PHYS_BASE, + mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCIE_IO_TARGET, + ORION_MBUS_PCIE_IO_ATTR, + ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, - ORION5X_PCIE_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_MEM_PHYS_BASE, - ORION5X_PCIE_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_IO_PHYS_BASE, + ORION5X_PCIE_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_MEM_TARGET, + ORION_MBUS_PCIE_MEM_ATTR, + ORION5X_PCIE_MEM_PHYS_BASE, + ORION5X_PCIE_MEM_SIZE); + mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCI_IO_TARGET, + ORION_MBUS_PCI_IO_ATTR, + ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, - ORION5X_PCI_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_MEM_PHYS_BASE, - ORION5X_PCI_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); + ORION5X_PCI_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(ORION_MBUS_PCI_MEM_TARGET, + ORION_MBUS_PCI_MEM_ATTR, + ORION5X_PCI_MEM_PHYS_BASE, + ORION5X_PCI_MEM_SIZE); } int orion5x_tclk; diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index a909afb384fb..f565f9944af2 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -7,6 +7,23 @@ struct dsa_platform_data; struct mv643xx_eth_platform_data; struct mv_sata_platform_data; +#define ORION_MBUS_PCIE_MEM_TARGET 0x04 +#define ORION_MBUS_PCIE_MEM_ATTR 0x59 +#define ORION_MBUS_PCIE_IO_TARGET 0x04 +#define ORION_MBUS_PCIE_IO_ATTR 0x51 +#define ORION_MBUS_PCIE_WA_TARGET 0x04 +#define ORION_MBUS_PCIE_WA_ATTR 0x79 +#define ORION_MBUS_PCI_MEM_TARGET 0x03 +#define ORION_MBUS_PCI_MEM_ATTR 0x59 +#define ORION_MBUS_PCI_IO_TARGET 0x03 +#define ORION_MBUS_PCI_IO_ATTR 0x51 +#define ORION_MBUS_DEVBUS_BOOT_TARGET 0x01 +#define ORION_MBUS_DEVBUS_BOOT_ATTR 0x0f +#define ORION_MBUS_DEVBUS_TARGET(cs) 0x01 +#define ORION_MBUS_DEVBUS_ATTR(cs) (~(1 << cs)) +#define ORION_MBUS_SRAM_TARGET 0x00 +#define ORION_MBUS_SRAM_ATTR 0x00 + /* * Basic Orion init functions used early by machine-setup. */ diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 16c88bbabc98..8f68b745c1d5 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -317,8 +317,10 @@ static void __init d2net_init(void) d2net_sata_power_init(); orion5x_sata_init(&d2net_sata_data); - mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE, - D2NET_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + D2NET_NOR_BOOT_BASE, + D2NET_NOR_BOOT_SIZE); platform_device_register(&d2net_nor_flash); platform_device_register(&d2net_gpio_buttons); diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 4e1263da38bb..4b2aefd1d961 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -340,19 +340,27 @@ static void __init db88f5281_init(void) orion5x_uart0_init(); orion5x_uart1_init(); - mvebu_mbus_add_window("devbus-boot", DB88F5281_NOR_BOOT_BASE, - DB88F5281_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + DB88F5281_NOR_BOOT_BASE, + DB88F5281_NOR_BOOT_SIZE); platform_device_register(&db88f5281_boot_flash); - mvebu_mbus_add_window("devbus-cs0", DB88F5281_7SEG_BASE, - DB88F5281_7SEG_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0), + ORION_MBUS_DEVBUS_ATTR(0), + DB88F5281_7SEG_BASE, + DB88F5281_7SEG_SIZE); - mvebu_mbus_add_window("devbus-cs1", DB88F5281_NOR_BASE, - DB88F5281_NOR_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1), + ORION_MBUS_DEVBUS_ATTR(1), + DB88F5281_NOR_BASE, + DB88F5281_NOR_SIZE); platform_device_register(&db88f5281_nor_flash); - mvebu_mbus_add_window("devbus-cs2", DB88F5281_NAND_BASE, - DB88F5281_NAND_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2), + ORION_MBUS_DEVBUS_ATTR(2), + DB88F5281_NAND_BASE, + DB88F5281_NAND_SIZE); platform_device_register(&db88f5281_nand_flash); i2c_register_board_info(0, &db88f5281_i2c_rtc, 1); diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 9e6baf581ed3..70974732cbf0 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -611,8 +611,10 @@ static void __init dns323_init(void) /* setup flash mapping * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 */ - mvebu_mbus_add_window("devbus-boot", DNS323_NOR_BOOT_BASE, - DNS323_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + DNS323_NOR_BOOT_BASE, + DNS323_NOR_BOOT_SIZE); platform_device_register(&dns323_nor_flash); /* Sort out LEDs, Buttons and i2c devices */ diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index 147615510dd0..0fc33c56cbb7 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -154,8 +154,10 @@ void __init edmini_v2_init(void) orion5x_ehci0_init(); orion5x_eth_init(&edmini_v2_eth_data); - mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE, - EDMINI_V2_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + EDMINI_V2_NOR_BOOT_BASE, + EDMINI_V2_NOR_BOOT_SIZE); platform_device_register(&edmini_v2_nor_flash); pr_notice("edmini_v2: USB device port, flash write and power-off " diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index aae10e4a917c..fe6a48a325e8 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -359,13 +359,17 @@ static void __init kurobox_pro_init(void) orion5x_uart1_init(); orion5x_xor_init(); - mvebu_mbus_add_window("devbus-boot", KUROBOX_PRO_NOR_BOOT_BASE, - KUROBOX_PRO_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + KUROBOX_PRO_NOR_BOOT_BASE, + KUROBOX_PRO_NOR_BOOT_SIZE); platform_device_register(&kurobox_pro_nor_flash); if (machine_is_kurobox_pro()) { - mvebu_mbus_add_window("devbus-cs0", KUROBOX_PRO_NAND_BASE, - KUROBOX_PRO_NAND_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0), + ORION_MBUS_DEVBUS_ATTR(0), + KUROBOX_PRO_NAND_BASE, + KUROBOX_PRO_NAND_SIZE); platform_device_register(&kurobox_pro_nand_flash); } diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 6234977b5aea..028ea038d404 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -294,8 +294,10 @@ static void __init lschl_init(void) orion5x_uart0_init(); orion5x_xor_init(); - mvebu_mbus_add_window("devbus-boot", LSCHL_NOR_BOOT_BASE, - LSCHL_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + LSCHL_NOR_BOOT_BASE, + LSCHL_NOR_BOOT_SIZE); platform_device_register(&lschl_nor_flash); platform_device_register(&lschl_leds); diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index fe04c4b64569..32b7129b767d 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -243,8 +243,10 @@ static void __init ls_hgl_init(void) orion5x_uart0_init(); orion5x_xor_init(); - mvebu_mbus_add_window("devbus-boot", LS_HGL_NOR_BOOT_BASE, - LS_HGL_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + LS_HGL_NOR_BOOT_BASE, + LS_HGL_NOR_BOOT_SIZE); platform_device_register(&ls_hgl_nor_flash); platform_device_register(&ls_hgl_button_device); diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index ca4dbe973daf..a6493e76f96d 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -244,8 +244,10 @@ static void __init lsmini_init(void) orion5x_uart0_init(); orion5x_xor_init(); - mvebu_mbus_add_window("devbus-boot", LSMINI_NOR_BOOT_BASE, - LSMINI_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + LSMINI_NOR_BOOT_BASE, + LSMINI_NOR_BOOT_SIZE); platform_device_register(&lsmini_nor_flash); platform_device_register(&lsmini_button_device); diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 827acbafc9dc..e105130ba51c 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -241,8 +241,10 @@ static void __init mss2_init(void) orion5x_uart0_init(); orion5x_xor_init(); - mvebu_mbus_add_window("devbus-boot", MSS2_NOR_BOOT_BASE, - MSS2_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + MSS2_NOR_BOOT_BASE, + MSS2_NOR_BOOT_SIZE); platform_device_register(&mss2_nor_flash); platform_device_register(&mss2_button_device); diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index 92600ae2b4b6..e032f01da49e 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -204,8 +204,10 @@ static void __init mv2120_init(void) orion5x_uart0_init(); orion5x_xor_init(); - mvebu_mbus_add_window("devbus-boot", MV2120_NOR_BOOT_BASE, - MV2120_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + MV2120_NOR_BOOT_BASE, + MV2120_NOR_BOOT_SIZE); platform_device_register(&mv2120_nor_flash); platform_device_register(&mv2120_button_device); diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index dd0641a0d074..ba73dc7ffb9e 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -397,8 +397,10 @@ static void __init net2big_init(void) net2big_sata_power_init(); orion5x_sata_init(&net2big_sata_data); - mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE, - NET2BIG_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + NET2BIG_NOR_BOOT_BASE, + NET2BIG_NOR_BOOT_SIZE); platform_device_register(&net2big_nor_flash); platform_device_register(&net2big_gpio_buttons); diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 503368023bb1..7fab67053030 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -157,11 +157,10 @@ static int __init pcie_setup(struct pci_sys_data *sys) if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " "read transaction workaround\n"); - mvebu_mbus_add_window_remap_flags("pcie0.0", - ORION5X_PCIE_WA_PHYS_BASE, - ORION5X_PCIE_WA_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_WA); + mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_WA_TARGET, + ORION_MBUS_PCIE_WA_ATTR, + ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); pcie_ops.read = pcie_rd_conf_wa; } diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 1c4498bf650a..213b3e143c57 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -123,8 +123,10 @@ static void __init rd88f5181l_fxo_init(void) orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ); orion5x_uart0_init(); - mvebu_mbus_add_window("devbus-boot", RD88F5181L_FXO_NOR_BOOT_BASE, - RD88F5181L_FXO_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + RD88F5181L_FXO_NOR_BOOT_BASE, + RD88F5181L_FXO_NOR_BOOT_SIZE); platform_device_register(&rd88f5181l_fxo_nor_boot_flash); } diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index adabe34c4fc6..594800e1d691 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -130,8 +130,10 @@ static void __init rd88f5181l_ge_init(void) orion5x_i2c_init(); orion5x_uart0_init(); - mvebu_mbus_add_window("devbus-boot", RD88F5181L_GE_NOR_BOOT_BASE, - RD88F5181L_GE_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + RD88F5181L_GE_NOR_BOOT_BASE, + RD88F5181L_GE_NOR_BOOT_SIZE); platform_device_register(&rd88f5181l_ge_nor_boot_flash); i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1); diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 66e77ec91532..b1cf68493ffc 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -264,11 +264,14 @@ static void __init rd88f5182_init(void) orion5x_uart0_init(); orion5x_xor_init(); - mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE, - RD88F5182_NOR_BOOT_SIZE); - - mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE, - RD88F5182_NOR_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + RD88F5182_NOR_BOOT_BASE, + RD88F5182_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1), + ORION_MBUS_DEVBUS_ATTR(1), + RD88F5182_NOR_BASE, + RD88F5182_NOR_SIZE); platform_device_register(&rd88f5182_nor_flash); platform_device_register(&rd88f5182_gpio_leds); diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index a0bfa53e7556..7e9064844698 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -329,8 +329,10 @@ static void __init tsp2_init(void) /* * Configure peripherals. */ - mvebu_mbus_add_window("devbus-boot", TSP2_NOR_BOOT_BASE, - TSP2_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + TSP2_NOR_BOOT_BASE, + TSP2_NOR_BOOT_SIZE); platform_device_register(&tsp2_nor_flash); orion5x_ehci0_init(); diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 80174f0f168e..e90c0618fdad 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -286,8 +286,10 @@ static void __init qnap_ts209_init(void) /* * Configure peripherals. */ - mvebu_mbus_add_window("devbus-boot", QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + QNAP_TS209_NOR_BOOT_BASE, + QNAP_TS209_NOR_BOOT_SIZE); platform_device_register(&qnap_ts209_nor_flash); orion5x_ehci0_init(); diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 92592790d6da..5c079d312015 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -277,8 +277,10 @@ static void __init qnap_ts409_init(void) /* * Configure peripherals. */ - mvebu_mbus_add_window("devbus-boot", QNAP_TS409_NOR_BOOT_BASE, - QNAP_TS409_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + QNAP_TS409_NOR_BOOT_BASE, + QNAP_TS409_NOR_BOOT_SIZE); platform_device_register(&qnap_ts409_nor_flash); orion5x_ehci0_init(); diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 6b84863c018d..80a56ee245b3 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -127,8 +127,10 @@ static void __init wnr854t_init(void) orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ); orion5x_uart0_init(); - mvebu_mbus_add_window("devbus-boot", WNR854T_NOR_BOOT_BASE, - WNR854T_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + WNR854T_NOR_BOOT_BASE, + WNR854T_NOR_BOOT_SIZE); platform_device_register(&wnr854t_nor_flash); } diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index fae684bc54f2..670e30dc0d1b 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -213,8 +213,10 @@ static void __init wrt350n_v2_init(void) orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ); orion5x_uart0_init(); - mvebu_mbus_add_window("devbus-boot", WRT350N_V2_NOR_BOOT_BASE, - WRT350N_V2_NOR_BOOT_SIZE); + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, + ORION_MBUS_DEVBUS_BOOT_ATTR, + WRT350N_V2_NOR_BOOT_BASE, + WRT350N_V2_NOR_BOOT_SIZE); platform_device_register(&wrt350n_v2_nor_flash); platform_device_register(&wrt350n_v2_leds); platform_device_register(&wrt350n_v2_button_device); diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index 02cc34388b05..c4525a88e5da 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -34,7 +34,10 @@ static void sirfsoc_set_wakeup_source(void) pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN); #define X_ON_KEY_B (1 << 0) - sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B, +#define RTC_ALARM0_B (1 << 2) +#define RTC_ALARM1_B (1 << 3) + sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B | + RTC_ALARM0_B | RTC_ALARM1_B, sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN); } @@ -85,12 +88,6 @@ static const struct platform_suspend_ops sirfsoc_pm_ops = { .valid = suspend_valid_only_mem, }; -int __init sirfsoc_pm_init(void) -{ - suspend_set_ops(&sirfsoc_pm_ops); - return 0; -} - static const struct of_device_id pwrc_ids[] = { { .compatible = "sirf,prima2-pwrc" }, {} @@ -118,7 +115,6 @@ static int __init sirfsoc_of_pwrc_init(void) return 0; } -postcore_initcall(sirfsoc_of_pwrc_init); static const struct of_device_id memc_ids[] = { { .compatible = "sirf,prima2-memc" }, @@ -149,4 +145,11 @@ static int __init sirfsoc_memc_init(void) { return platform_driver_register(&sirfsoc_memc_driver); } -postcore_initcall(sirfsoc_memc_init); + +int __init sirfsoc_pm_init(void) +{ + sirfsoc_of_pwrc_init(); + sirfsoc_memc_init(); + suspend_set_ops(&sirfsoc_pm_ops); + return 0; +} diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 3912ce91fee4..dd80f215feeb 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -23,9 +23,10 @@ config ARCH_R8A73A4 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 - select HAVE_ARM_ARCH_TIMER select SH_CLK_CPG select RENESAS_IRQC + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" @@ -59,7 +60,6 @@ config ARCH_R8A7790 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC select CPU_V7 - select HAVE_ARM_ARCH_TIMER select SH_CLK_CPG select RENESAS_IRQC @@ -156,6 +156,18 @@ config MACH_KZM9D select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF +config MACH_KZM9D_REFERENCE + bool "KZM9D board - Reference Device Tree Implementation" + depends on ARCH_EMEV2 + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of KZM9D board support + which makes a greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 6165a517f580..e8d0a2c904a0 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o +obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 84c6868580f0..7785c52b5cfd 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -7,6 +7,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000 +loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 5eb0caa6a7d0..af6dd39d3758 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -20,7 +20,6 @@ #include <linux/gpio.h> #include <linux/interrupt.h> -#include <linux/irqchip.h> #include <linux/kernel.h> #include <linux/pinctrl/machine.h> #include <linux/platform_device.h> @@ -102,7 +101,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(APE6EVM_DT, "ape6evm") - .init_irq = irqchip_init, + .init_early = r8a73a4_init_delay, .init_time = shmobile_timer_init, .init_machine = ape6evm_add_standard_devices, .dt_compat = ape6evm_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index c5be60d85e4b..f6952c266fe9 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -679,15 +679,6 @@ static struct platform_device vcc_sdhi1 = { }; /* SDHI0 */ -/* - * FIXME - * - * It use polling mode here, since - * CD (= Card Detect) pin is not connected to SDHI0_CD. - * We can use IRQ31 as card detect irq, - * but it needs chattering removal operation - */ -#define IRQ31 irq_pin(31) static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c new file mode 100644 index 000000000000..a7b28b24ab38 --- /dev/null +++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c @@ -0,0 +1,46 @@ +/* + * kzm9d board support - Reference DT implementation + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <mach/emev2.h> +#include <mach/common.h> +#include <asm/mach/arch.h> + +static void __init kzm9d_add_standard_devices(void) +{ + emev2_clock_init(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *kzm9d_boards_compat_dt[] __initdata = { + "renesas,kzm9d-reference", + NULL, +}; + +DT_MACHINE_START(KZM9D_DT, "kzm9d") + .smp = smp_ops(emev2_smp_ops), + .map_io = emev2_map_io, + .init_early = emev2_init_delay, + .init_machine = kzm9d_add_standard_devices, + .init_late = shmobile_init_late, + .dt_compat = kzm9d_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 4368000e1127..30c2cc695b12 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -85,9 +85,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = { DT_MACHINE_START(KZM9D_DT, "kzm9d") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, - .init_early = emev2_add_early_devices, - .nr_irqs = NR_IRQS_LEGACY, - .init_irq = emev2_init_irq, + .init_early = emev2_init_delay, .init_machine = kzm9d_add_standard_devices, .init_late = shmobile_init_late, .dt_compat = kzm9d_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index 44055fe8a45c..41092bb01ee5 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -24,7 +24,6 @@ #include <linux/gpio.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/input.h> #include <linux/of_platform.h> #include <linux/pinctrl/machine.h> @@ -99,7 +98,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") .map_io = sh73a0_map_io, .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = kzm_init, .init_time = shmobile_timer_init, .dt_compat = kzm9g_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index 8d6bd5c5efb9..f89f16650731 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -22,7 +22,6 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/interrupt.h> -#include <linux/irqchip.h> #include <linux/kernel.h> #include <linux/leds.h> #include <linux/pinctrl/machine.h> @@ -103,7 +102,7 @@ static const char *lager_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(LAGER_DT, "lager") - .init_irq = irqchip_init, + .init_early = r8a7790_init_delay, .init_time = r8a7790_timer_init, .init_machine = lager_add_standard_devices, .dt_compat = lager_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c index 4710f1847bb7..5ac13ba71d54 100644 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ b/arch/arm/mach-shmobile/clock-emev2.c @@ -40,7 +40,6 @@ #define USIB2SCLKDIV 0x65c #define USIB3SCLKDIV 0x660 #define STI_CLKSEL 0x688 -#define SMU_GENERAL_REG0 0x7c0 /* not pretty, but hey */ static void __iomem *smu_base; @@ -51,11 +50,6 @@ static void emev2_smu_write(unsigned long value, int offs) iowrite32(value, smu_base + offs); } -void emev2_set_boot_vector(unsigned long value) -{ - emev2_smu_write(value, SMU_GENERAL_REG0); -} - static struct clk_mapping smu_mapping = { .phys = EMEV2_SMU_BASE, .len = PAGE_SIZE, @@ -205,23 +199,11 @@ static struct clk_lookup lookups[] = { void __init emev2_clock_init(void) { int k, ret = 0; - static int is_setup; - - /* yuck, this is ugly as hell, but the non-smp case of clocks - * code is now designed to rely on ioremap() instead of static - * entity maps. in the case of smp we need access to the SMU - * register earlier than ioremap() is actually working without - * any static maps. to enable SMP in ugly but with dynamic - * mappings we have to call emev2_clock_init() from different - * places depending on UP and SMP... - */ - if (is_setup++) - return; smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); BUG_ON(!smu_base); - /* setup STI timer to run on 37.768 kHz and deassert reset */ + /* setup STI timer to run on 32.768 kHz and deassert reset */ emev2_smu_write(0, STI_CLKSEL); emev2_smu_write(1, STI_RSTCTRL); diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 5f7fe628b8a1..8ea5ef6c79cc 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -30,10 +30,12 @@ #define SMSTPCR2 0xe6150138 #define SMSTPCR3 0xe615013c +#define SMSTPCR4 0xe6150140 #define SMSTPCR5 0xe6150144 #define FRQCRA 0xE6150000 #define FRQCRB 0xE6150004 +#define FRQCRC 0xE61500E0 #define VCLKCR1 0xE6150008 #define VCLKCR2 0xE615000C #define VCLKCR3 0xE615001C @@ -52,6 +54,7 @@ #define HSICKCR 0xE615026C #define M4CKCR 0xE6150098 #define PLLECR 0xE61500D0 +#define PLL0CR 0xE61500D8 #define PLL1CR 0xE6150028 #define PLL2CR 0xE615002C #define PLL2SCR 0xE61501F4 @@ -177,6 +180,7 @@ static struct sh_clk_ops pll_clk_ops = { .mapping = &cpg_mapping, \ } +PLL_CLOCK(pll0_clk, &main_clk, pll_parent_main, 1, 20, PLL0CR, 0); PLL_CLOCK(pll1_clk, &main_clk, pll_parent_main, 1, 7, PLL1CR, 1); PLL_CLOCK(pll2_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR, 2); PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4); @@ -184,6 +188,157 @@ PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5); SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2); +static atomic_t frqcr_lock; + +/* Several clocks need to access FRQCRB, have to lock */ +static bool frqcr_kick_check(struct clk *clk) +{ + return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31)); +} + +static int frqcr_kick_do(struct clk *clk) +{ + int i; + + /* set KICK bit in FRQCRB to update hardware setting, check success */ + iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB)); + for (i = 1000; i; i--) + if (ioread32(CPG_MAP(FRQCRB)) & BIT(31)) + cpu_relax(); + else + return 0; + + return -ETIMEDOUT; +} + +static int zclk_set_rate(struct clk *clk, unsigned long rate) +{ + void __iomem *frqcrc; + int ret; + unsigned long step, p_rate; + u32 val; + + if (!clk->parent || !__clk_get(clk->parent)) + return -ENODEV; + + if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) { + ret = -EBUSY; + goto done; + } + + /* + * Users are supposed to first call clk_set_rate() only with + * clk_round_rate() results. So, we don't fix wrong rates here, but + * guard against them anyway + */ + + p_rate = clk_get_rate(clk->parent); + if (rate == p_rate) { + val = 0; + } else { + step = DIV_ROUND_CLOSEST(p_rate, 32); + + if (rate > p_rate || rate < step) { + ret = -EINVAL; + goto done; + } + + val = 32 - rate / step; + } + + frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg); + + iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) | + (val << clk->enable_bit), frqcrc); + + ret = frqcr_kick_do(clk); + +done: + atomic_dec(&frqcr_lock); + __clk_put(clk->parent); + return ret; +} + +static long zclk_round_rate(struct clk *clk, unsigned long rate) +{ + /* + * theoretical rate = parent rate * multiplier / 32, + * where 1 <= multiplier <= 32. Therefore we should do + * multiplier = rate * 32 / parent rate + * rounded rate = parent rate * multiplier / 32. + * However, multiplication before division won't fit in 32 bits, so + * we sacrifice some precision by first dividing and then multiplying. + * To find the nearest divisor we calculate both and pick up the best + * one. This avoids 64-bit arithmetics. + */ + unsigned long step, mul_min, mul_max, rate_min, rate_max; + + rate_max = clk_get_rate(clk->parent); + + /* output freq <= parent */ + if (rate >= rate_max) + return rate_max; + + step = DIV_ROUND_CLOSEST(rate_max, 32); + /* output freq >= parent / 32 */ + if (step >= rate) + return step; + + mul_min = rate / step; + mul_max = DIV_ROUND_UP(rate, step); + rate_min = step * mul_min; + if (mul_max == mul_min) + return rate_min; + + rate_max = step * mul_max; + + if (rate_max - rate < rate - rate_min) + return rate_max; + + return rate_min; +} + +static unsigned long zclk_recalc(struct clk *clk) +{ + void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg; + unsigned int max = clk->div_mask + 1; + unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) & + clk->div_mask); + + return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) * + (max - val); +} + +static struct sh_clk_ops zclk_ops = { + .recalc = zclk_recalc, + .set_rate = zclk_set_rate, + .round_rate = zclk_round_rate, +}; + +static struct clk z_clk = { + .parent = &pll0_clk, + .div_mask = 0x1f, + .enable_bit = 8, + /* We'll need to access FRQCRB and FRQCRC */ + .enable_reg = (void __iomem *)FRQCRB, + .ops = &zclk_ops, +}; + +/* + * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3 + * switching is only available in auto-DVFS mode + */ +SH_FIXED_RATIO_CLK(pll0_div2_clk, pll0_clk, div2); + +static struct clk z2_clk = { + .parent = &pll0_div2_clk, + .div_mask = 0x1f, + .enable_bit = 0, + /* We'll need to access FRQCRB and FRQCRC */ + .enable_reg = (void __iomem *)FRQCRB, + .ops = &zclk_ops, +}; + static struct clk *main_clks[] = { &extalr_clk, &extal1_clk, @@ -195,22 +350,23 @@ static struct clk *main_clks[] = { &main_div2_clk, &fsiack_clk, &fsibck_clk, + &pll0_clk, &pll1_clk, &pll1_div2_clk, &pll2_clk, &pll2s_clk, &pll2h_clk, + &z_clk, + &pll0_div2_clk, + &z2_clk, }; /* DIV4 */ static void div4_kick(struct clk *clk) { - unsigned long value; - - /* set KICK bit in FRQCRB to update hardware setting */ - value = ioread32(CPG_MAP(FRQCRB)); - value |= (1 << 31); - iowrite32(value, CPG_MAP(FRQCRB)); + if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n")) + frqcr_kick_do(clk); + atomic_dec(&frqcr_lock); } static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10}; @@ -349,8 +505,10 @@ static struct clk div6_clks[DIV6_NR] = { /* MSTP */ enum { MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, - MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, - MSTP522, + MSTP329, MSTP323, MSTP318, MSTP317, MSTP316, + MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300, + MSTP411, MSTP410, MSTP409, + MSTP522, MSTP515, MSTP_NR }; @@ -361,12 +519,22 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */ [MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */ [MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */ + [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */ [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */ [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */ [MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */ + [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 16, 0), /* IIC6 */ + [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 17, 0), /* IIC7 */ + [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* IIC0 */ + [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ + [MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP409] = SH_CLK_MSTP32(&main_div2_clk, SMSTPCR4, 9, 0), /* IIC5 */ + [MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ + [MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */ + [MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR5, 15, 0), /* IIC8 */ }; static struct clk_lookup lookups[] = { @@ -386,6 +554,9 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pll2s", &pll2s_clk), CLKDEV_CON_ID("pll2h", &pll2h_clk), + /* CPU clock */ + CLKDEV_DEV_ID("cpufreq-cpu0", &z_clk), + /* DIV6 */ CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]), CLKDEV_CON_ID("vck1", &div6_clks[DIV6_VCK1]), @@ -408,6 +579,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), + CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), @@ -418,6 +590,15 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), + CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]), + CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]), + CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]), + CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]), + CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), + CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]), + CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]), + CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]), + CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]), /* for DT */ CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), @@ -429,6 +610,8 @@ void __init r8a73a4_clock_init(void) int k, ret = 0; u32 ckscr; + atomic_set(&frqcr_lock, -1); + reg = ioremap_nocache(CKSCR, PAGE_SIZE); BUG_ON(!reg); ckscr = ioread32(reg); diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index de10fd78bf2b..c826bca4024e 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -596,7 +596,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]), - CLKDEV_DEV_ID("renesas_tpu_pwm", &mstp_clks[MSTP304]), + CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]), + CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 5d71313df52d..fc36d3db0b4d 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -24,6 +24,7 @@ #include <linux/clkdev.h> #include <mach/clock.h> #include <mach/common.h> +#include <mach/r8a7790.h> /* * MD EXTAL PLL0 PLL1 PLL3 @@ -42,16 +43,16 @@ * see "p1 / 2" on R8A7790_CLOCK_ROOT() below */ -#define MD(nr) (1 << nr) - #define CPG_BASE 0xe6150000 #define CPG_LEN 0x1000 +#define SMSTPCR1 0xe6150134 #define SMSTPCR2 0xe6150138 #define SMSTPCR3 0xe615013c +#define SMSTPCR5 0xe6150144 #define SMSTPCR7 0xe615014c +#define SMSTPCR8 0xe6150990 -#define MODEMR 0xE6160060 #define SDCKCR 0xE6150074 #define SD2CKCR 0xE6150078 #define SD3CKCR 0xE615007C @@ -180,16 +181,23 @@ static struct clk div6_clks[DIV6_NR] = { /* MSTP */ enum { + MSTP813, MSTP721, MSTP720, MSTP717, MSTP716, + MSTP522, MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, + MSTP124, MSTP_NR }; static struct clk mstp_clks[MSTP_NR] = { + [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */ [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */ [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */ + [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */ + [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */ + [MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */ [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */ [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */ @@ -203,8 +211,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */ [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */ [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */ - [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */ - [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */ + [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */ }; static struct clk_lookup lookups[] = { @@ -254,6 +261,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]), CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]), + CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]), + CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), @@ -266,6 +275,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]), CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), + CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), }; #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31) \ @@ -280,14 +290,9 @@ static struct clk_lookup lookups[] = { void __init r8a7790_clock_init(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; + u32 mode = r8a7790_read_mode_pins(); int k, ret = 0; - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - switch (mode & (MD(14) | MD(13))) { case 0: R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index bfd920083a3b..f45dde701d7b 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -37,13 +37,15 @@ ENTRY(shmobile_boot_scu) lsl r1, r1, #3 @ we will shift by cpu_id * 8 bits ldr r2, [r0, #8] @ SCU Power Status Register mov r3, #3 - bic r2, r2, r3, lsl r1 @ Clear bits of our CPU (Run Mode) + lsl r3, r3, r1 + bic r2, r2, r3 @ Clear bits of our CPU (Run Mode) str r2, [r0, #8] @ write back b shmobile_invalidate_start ENDPROC(shmobile_boot_scu) .text + .align 2 .globl shmobile_scu_base shmobile_scu_base: .space 4 diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index a9d212498987..2667db806c39 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -24,12 +24,16 @@ ENDPROC(shmobile_invalidate_start) * This will be mapped at address 0 by SBAR register. * We need _long_ jump to the physical address. */ + .arm .align 12 ENTRY(shmobile_boot_vector) ldr r0, 2f - ldr pc, 1f + ldr r1, 1f + bx r1 + ENDPROC(shmobile_boot_vector) + .align 2 .globl shmobile_boot_fn shmobile_boot_fn: 1: .space 4 diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/arm/mach-shmobile/include/mach/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h index ac3751705cab..c2eb7568d9be 100644 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ b/arch/arm/mach-shmobile/include/mach/emev2.h @@ -2,11 +2,9 @@ #define __ASM_EMEV2_H__ extern void emev2_map_io(void); -extern void emev2_init_irq(void); -extern void emev2_add_early_devices(void); +extern void emev2_init_delay(void); extern void emev2_add_standard_devices(void); extern void emev2_clock_init(void); -extern void emev2_set_boot_vector(unsigned long value); #define EMEV2_GPIO_BASE 200 #define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n)) diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h index f043103e32c9..144a85e29245 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h +++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h @@ -4,5 +4,6 @@ void r8a73a4_add_standard_devices(void); void r8a73a4_clock_init(void); void r8a73a4_pinmux_init(void); +void r8a73a4_init_delay(void); #endif /* __ASM_R8A73A4_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index b34d19b5ca5c..56f375005fcd 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -42,6 +42,8 @@ enum { SHDMA_SLAVE_FSIB_TX, SHDMA_SLAVE_USBHS_TX, SHDMA_SLAVE_USBHS_RX, + SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_MMCIF_RX, }; extern void r8a7740_meram_workaround(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index 851d027a2f06..9b561bf4229f 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -33,7 +33,6 @@ extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info); extern void r8a7778_init_late(void); extern void r8a7778_init_delay(void); -extern void r8a7778_init_irq(void); extern void r8a7778_init_irq_dt(void); extern void r8a7778_clock_init(void); extern void r8a7778_init_irq_extpin(int irlm); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h index 2e919e61fa0d..7aaef409a059 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7790.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h @@ -4,6 +4,10 @@ void r8a7790_add_standard_devices(void); void r8a7790_clock_init(void); void r8a7790_pinmux_init(void); +void r8a7790_init_delay(void); void r8a7790_timer_init(void); +#define MD(nr) BIT(nr) +u32 r8a7790_read_mode_pins(void); + #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h index f2d8744c1f14..c3c4669a2d72 100644 --- a/arch/arm/mach-shmobile/include/mach/zboot.h +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -1,7 +1,6 @@ #ifndef ZBOOT_H #define ZBOOT_H -#include <asm/mach-types.h> #include <mach/zboot_macros.h> /************************************************** @@ -11,7 +10,6 @@ **************************************************/ #ifdef CONFIG_MACH_MACKEREL -#define MACH_TYPE MACH_TYPE_MACKEREL #define MEMORY_START 0x40000000 #include "mach/head-mackerel.txt" #else diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 1ccddd228112..19980be7d6a9 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -20,7 +20,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/platform_device.h> #include <linux/platform_data/gpio-em.h> #include <linux/of_platform.h> @@ -39,13 +38,6 @@ static struct map_desc emev2_io_desc[] __initdata = { #ifdef CONFIG_SMP - /* 128K entity map for 0xe0100000 (SMU) */ - { - .virtual = 0xe0100000, - .pfn = __phys_to_pfn(0xe0100000), - .length = SZ_128K, - .type = MT_DEVICE - }, /* 2M mapping for SCU + L2 controller */ { .virtual = 0xf0000000, @@ -63,102 +55,40 @@ void __init emev2_map_io(void) /* UART */ static struct resource uart0_resources[] = { - [0] = { - .start = 0xe1020000, - .end = 0xe1020037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 40, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart0_device = { - .name = "serial8250-em", - .id = 0, - .num_resources = ARRAY_SIZE(uart0_resources), - .resource = uart0_resources, + DEFINE_RES_MEM(0xe1020000, 0x38), + DEFINE_RES_IRQ(40), }; static struct resource uart1_resources[] = { - [0] = { - .start = 0xe1030000, - .end = 0xe1030037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 41, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart1_device = { - .name = "serial8250-em", - .id = 1, - .num_resources = ARRAY_SIZE(uart1_resources), - .resource = uart1_resources, + DEFINE_RES_MEM(0xe1030000, 0x38), + DEFINE_RES_IRQ(41), }; static struct resource uart2_resources[] = { - [0] = { - .start = 0xe1040000, - .end = 0xe1040037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 42, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device uart2_device = { - .name = "serial8250-em", - .id = 2, - .num_resources = ARRAY_SIZE(uart2_resources), - .resource = uart2_resources, + DEFINE_RES_MEM(0xe1040000, 0x38), + DEFINE_RES_IRQ(42), }; static struct resource uart3_resources[] = { - [0] = { - .start = 0xe1050000, - .end = 0xe1050037, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 43, - .flags = IORESOURCE_IRQ, - } + DEFINE_RES_MEM(0xe1050000, 0x38), + DEFINE_RES_IRQ(43), }; -static struct platform_device uart3_device = { - .name = "serial8250-em", - .id = 3, - .num_resources = ARRAY_SIZE(uart3_resources), - .resource = uart3_resources, -}; +#define emev2_register_uart(idx) \ + platform_device_register_simple("serial8250-em", idx, \ + uart##idx##_resources, \ + ARRAY_SIZE(uart##idx##_resources)) /* STI */ static struct resource sti_resources[] = { - [0] = { - .name = "STI", - .start = 0xe0180000, - .end = 0xe0180053, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 157, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sti_device = { - .name = "em_sti", - .id = 0, - .resource = sti_resources, - .num_resources = ARRAY_SIZE(sti_resources), + DEFINE_RES_MEM(0xe0180000, 0x54), + DEFINE_RES_IRQ(157), }; +#define emev2_register_sti() \ + platform_device_register_simple("em_sti", 0, \ + sti_resources, \ + ARRAY_SIZE(sti_resources)) /* GIO */ static struct gpio_em_config gio0_config = { @@ -168,36 +98,10 @@ static struct gpio_em_config gio0_config = { }; static struct resource gio0_resources[] = { - [0] = { - .name = "GIO_000", - .start = 0xe0050000, - .end = 0xe005002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_000", - .start = 0xe0050040, - .end = 0xe005005f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 99, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 100, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio0_device = { - .name = "em_gio", - .id = 0, - .resource = gio0_resources, - .num_resources = ARRAY_SIZE(gio0_resources), - .dev = { - .platform_data = &gio0_config, - }, + DEFINE_RES_MEM(0xe0050000, 0x2c), + DEFINE_RES_MEM(0xe0050040, 0x20), + DEFINE_RES_IRQ(99), + DEFINE_RES_IRQ(100), }; static struct gpio_em_config gio1_config = { @@ -207,36 +111,10 @@ static struct gpio_em_config gio1_config = { }; static struct resource gio1_resources[] = { - [0] = { - .name = "GIO_032", - .start = 0xe0050080, - .end = 0xe00500ab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_032", - .start = 0xe00500c0, - .end = 0xe00500df, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 101, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 102, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio1_device = { - .name = "em_gio", - .id = 1, - .resource = gio1_resources, - .num_resources = ARRAY_SIZE(gio1_resources), - .dev = { - .platform_data = &gio1_config, - }, + DEFINE_RES_MEM(0xe0050080, 0x2c), + DEFINE_RES_MEM(0xe00500c0, 0x20), + DEFINE_RES_IRQ(101), + DEFINE_RES_IRQ(102), }; static struct gpio_em_config gio2_config = { @@ -246,36 +124,10 @@ static struct gpio_em_config gio2_config = { }; static struct resource gio2_resources[] = { - [0] = { - .name = "GIO_064", - .start = 0xe0050100, - .end = 0xe005012b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_064", - .start = 0xe0050140, - .end = 0xe005015f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 103, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 104, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio2_device = { - .name = "em_gio", - .id = 2, - .resource = gio2_resources, - .num_resources = ARRAY_SIZE(gio2_resources), - .dev = { - .platform_data = &gio2_config, - }, + DEFINE_RES_MEM(0xe0050100, 0x2c), + DEFINE_RES_MEM(0xe0050140, 0x20), + DEFINE_RES_IRQ(103), + DEFINE_RES_IRQ(104), }; static struct gpio_em_config gio3_config = { @@ -285,36 +137,10 @@ static struct gpio_em_config gio3_config = { }; static struct resource gio3_resources[] = { - [0] = { - .name = "GIO_096", - .start = 0xe0050180, - .end = 0xe00501ab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_096", - .start = 0xe00501c0, - .end = 0xe00501df, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 105, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 106, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gio3_device = { - .name = "em_gio", - .id = 3, - .resource = gio3_resources, - .num_resources = ARRAY_SIZE(gio3_resources), - .dev = { - .platform_data = &gio3_config, - }, + DEFINE_RES_MEM(0xe0050180, 0x2c), + DEFINE_RES_MEM(0xe00501c0, 0x20), + DEFINE_RES_IRQ(105), + DEFINE_RES_IRQ(106), }; static struct gpio_em_config gio4_config = { @@ -324,126 +150,52 @@ static struct gpio_em_config gio4_config = { }; static struct resource gio4_resources[] = { - [0] = { - .name = "GIO_128", - .start = 0xe0050200, - .end = 0xe005022b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "GIO_128", - .start = 0xe0050240, - .end = 0xe005025f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = 107, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 108, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xe0050200, 0x2c), + DEFINE_RES_MEM(0xe0050240, 0x20), + DEFINE_RES_IRQ(107), + DEFINE_RES_IRQ(108), }; -static struct platform_device gio4_device = { - .name = "em_gio", - .id = 4, - .resource = gio4_resources, - .num_resources = ARRAY_SIZE(gio4_resources), - .dev = { - .platform_data = &gio4_config, - }, -}; +#define emev2_register_gio(idx) \ + platform_device_register_resndata(&platform_bus, "em_gio", \ + idx, gio##idx##_resources, \ + ARRAY_SIZE(gio##idx##_resources), \ + &gio##idx##_config, \ + sizeof(struct gpio_em_config)) static struct resource pmu_resources[] = { - [0] = { - .start = 152, - .end = 152, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = 153, - .end = 153, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_IRQ(152), + DEFINE_RES_IRQ(153), }; -static struct platform_device pmu_device = { - .name = "arm-pmu", - .id = -1, - .num_resources = ARRAY_SIZE(pmu_resources), - .resource = pmu_resources, -}; - -static struct platform_device *emev2_early_devices[] __initdata = { - &uart0_device, - &uart1_device, - &uart2_device, - &uart3_device, -}; - -static struct platform_device *emev2_late_devices[] __initdata = { - &sti_device, - &gio0_device, - &gio1_device, - &gio2_device, - &gio3_device, - &gio4_device, - &pmu_device, -}; +#define emev2_register_pmu() \ + platform_device_register_simple("arm-pmu", -1, \ + pmu_resources, \ + ARRAY_SIZE(pmu_resources)) void __init emev2_add_standard_devices(void) { emev2_clock_init(); - platform_add_devices(emev2_early_devices, - ARRAY_SIZE(emev2_early_devices)); - - platform_add_devices(emev2_late_devices, - ARRAY_SIZE(emev2_late_devices)); + emev2_register_uart(0); + emev2_register_uart(1); + emev2_register_uart(2); + emev2_register_uart(3); + emev2_register_sti(); + emev2_register_gio(0); + emev2_register_gio(1); + emev2_register_gio(2); + emev2_register_gio(3); + emev2_register_gio(4); + emev2_register_pmu(); } -static void __init emev2_init_delay(void) +void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } -void __init emev2_add_early_devices(void) -{ - emev2_init_delay(); - - early_platform_add_devices(emev2_early_devices, - ARRAY_SIZE(emev2_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - -void __init emev2_init_irq(void) -{ - void __iomem *gic_dist_base; - void __iomem *gic_cpu_base; - - /* Static mappings, never released */ - gic_dist_base = ioremap(0xe0028000, PAGE_SIZE); - gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE); - BUG_ON(!gic_dist_base || !gic_cpu_base); - - /* Use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); -} - #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = { - { } -}; - -static void __init emev2_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - emev2_auxdata_lookup, NULL); -} static const char *emev2_boards_compat_dt[] __initdata = { "renesas,emev2", @@ -452,10 +204,8 @@ static const char *emev2_boards_compat_dt[] __initdata = { DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), + .map_io = emev2_map_io, .init_early = emev2_init_delay, - .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, - .init_machine = emev2_add_standard_devices_dt, .dt_compat = emev2_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 7f45c2edbca9..d533bd23865c 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -18,11 +18,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/platform_data/irq-renesas-irqc.h> #include <linux/serial_sci.h> +#include <linux/sh_timer.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a73a4.h> @@ -169,6 +169,25 @@ static const struct resource thermal0_resources[] = { thermal0_resources, \ ARRAY_SIZE(thermal0_resources)) +static struct sh_timer_config cmt10_platform_data = { + .name = "CMT10", + .timer_bit = 0, + .clockevent_rating = 80, +}; + +static struct resource cmt10_resources[] = { + DEFINE_RES_MEM(0xe6130010, 0x0c), + DEFINE_RES_MEM(0xe6130000, 0x04), + DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */ +}; + +#define r8a7790_register_cmt(idx) \ + platform_device_register_resndata(&platform_bus, "sh_cmt", \ + idx, cmt##idx##_resources, \ + ARRAY_SIZE(cmt##idx##_resources), \ + &cmt##idx##_platform_data, \ + sizeof(struct sh_timer_config)) + void __init r8a73a4_add_standard_devices(void) { r8a73a4_register_scif(SCIFA0); @@ -180,11 +199,20 @@ void __init r8a73a4_add_standard_devices(void) r8a73a4_register_irqc(0); r8a73a4_register_irqc(1); r8a73a4_register_thermal(); + r8a7790_register_cmt(10); +} + +void __init r8a73a4_init_delay(void) +{ +#ifndef CONFIG_ARM_ARCH_TIMER + shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */ +#endif } #ifdef CONFIG_USE_OF void __init r8a73a4_add_standard_devices_dt(void) { + platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -194,7 +222,7 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") - .init_irq = irqchip_init, + .init_early = r8a73a4_init_delay, .init_machine = r8a73a4_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a73a4_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 00c5a707238b..84c5bb6d9725 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -588,6 +588,16 @@ static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = { .addr = 0xfe1f0064, .chcr = CHCR_TX(XMIT_SZ_32BIT), .mid_rid = 0xb5, + }, { + .slave_id = SHDMA_SLAVE_MMCIF_TX, + .addr = 0xe6bd0034, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xd1, + }, { + .slave_id = SHDMA_SLAVE_MMCIF_RX, + .addr = 0xe6bd0034, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xd2, }, }; @@ -986,16 +996,22 @@ void __init r8a7740_add_early_devices(void) #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = { - { } -}; +void __init r8a7740_add_early_devices_dt(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ + + early_platform_add_devices(r8a7740_early_devices, + ARRAY_SIZE(r8a7740_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} void __init r8a7740_add_standard_devices_dt(void) { platform_add_devices(r8a7740_devices_dt, ARRAY_SIZE(r8a7740_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - r8a7740_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } void __init r8a7740_init_delay(void) diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 80c20392ad7c..a3a2e37b03f3 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -53,7 +53,7 @@ .irqs = SCIx_IRQ_MUXED(irq), \ } -static struct plat_sci_port scif_platform_data[] = { +static struct plat_sci_port scif_platform_data[] __initdata = { SCIF_INFO(0xffe40000, gic_iid(0x66)), SCIF_INFO(0xffe41000, gic_iid(0x67)), SCIF_INFO(0xffe42000, gic_iid(0x68)), @@ -63,24 +63,24 @@ static struct plat_sci_port scif_platform_data[] = { }; /* TMU */ -static struct resource sh_tmu0_resources[] = { +static struct resource sh_tmu0_resources[] __initdata = { DEFINE_RES_MEM(0xffd80008, 12), DEFINE_RES_IRQ(gic_iid(0x40)), }; -static struct sh_timer_config sh_tmu0_platform_data = { +static struct sh_timer_config sh_tmu0_platform_data __initdata = { .name = "TMU00", .channel_offset = 0x4, .timer_bit = 0, .clockevent_rating = 200, }; -static struct resource sh_tmu1_resources[] = { +static struct resource sh_tmu1_resources[] __initdata = { DEFINE_RES_MEM(0xffd80014, 12), DEFINE_RES_IRQ(gic_iid(0x41)), }; -static struct sh_timer_config sh_tmu1_platform_data = { +static struct sh_timer_config sh_tmu1_platform_data __initdata = { .name = "TMU01", .channel_offset = 0x10, .timer_bit = 1, @@ -189,7 +189,7 @@ USB_PLATFORM_INFO(ehci); USB_PLATFORM_INFO(ohci); /* Ether */ -static struct resource ether_resources[] = { +static struct resource ether_resources[] __initdata = { DEFINE_RES_MEM(0xfde00000, 0x400), DEFINE_RES_IRQ(gic_iid(0x89)), }; @@ -203,17 +203,17 @@ void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata) } /* PFC/GPIO */ -static struct resource pfc_resources[] = { +static struct resource pfc_resources[] __initdata = { DEFINE_RES_MEM(0xfffc0000, 0x118), }; #define R8A7778_GPIO(idx) \ -static struct resource r8a7778_gpio##idx##_resources[] = { \ +static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \ DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \ DEFINE_RES_IRQ(gic_iid(0x87)), \ }; \ \ -static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = { \ +static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \ .gpio_base = 32 * (idx), \ .irq_base = GPIO_IRQ_BASE(idx), \ .number_of_pins = 32, \ @@ -249,7 +249,7 @@ void __init r8a7778_pinmux_init(void) }; /* SDHI */ -static struct resource sdhi_resources[] = { +static struct resource sdhi_resources[] __initdata = { /* SDHI0 */ DEFINE_RES_MEM(0xFFE4C000, 0x100), DEFINE_RES_IRQ(gic_iid(0x77)), @@ -365,12 +365,12 @@ void __init r8a7778_init_late(void) platform_device_register_full(&ohci_info); } -static struct renesas_intc_irqpin_config irqpin_platform_data = { +static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ .sense_bitfield_width = 2, }; -static struct resource irqpin_resources[] = { +static struct resource irqpin_resources[] __initdata = { DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ @@ -408,17 +408,25 @@ void __init r8a7778_init_irq_extpin(int irlm) &irqpin_platform_data, sizeof(irqpin_platform_data)); } +void __init r8a7778_init_delay(void) +{ + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ +} + +#ifdef CONFIG_USE_OF #define INT2SMSKCR0 0x82288 /* 0xfe782288 */ #define INT2SMSKCR1 0x8228c /* 0xfe78228c */ #define INT2NTSR0 0x00018 /* 0xfe700018 */ #define INT2NTSR1 0x0002c /* 0xfe70002c */ -static void __init r8a7778_init_irq_common(void) +void __init r8a7778_init_irq_dt(void) { void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000); BUG_ON(!base); + irqchip_init(); + /* route all interrupts to ARM */ __raw_writel(0x73ffffff, base + INT2NTSR0); __raw_writel(0xffffffff, base + INT2NTSR1); @@ -430,43 +438,6 @@ static void __init r8a7778_init_irq_common(void) iounmap(base); } -void __init r8a7778_init_irq(void) -{ - void __iomem *gic_dist_base; - void __iomem *gic_cpu_base; - - gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE); - gic_cpu_base = ioremap_nocache(0xfe430000, PAGE_SIZE); - BUG_ON(!gic_dist_base || !gic_cpu_base); - - /* use GIC to handle interrupts */ - gic_init(0, 29, gic_dist_base, gic_cpu_base); - - r8a7778_init_irq_common(); -} - -void __init r8a7778_init_delay(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ -} - -#ifdef CONFIG_USE_OF -void __init r8a7778_init_irq_dt(void) -{ - irqchip_init(); - r8a7778_init_irq_common(); -} - -static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = { - {}, -}; - -void __init r8a7778_add_standard_devices_dt(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, - r8a7778_auxdata_lookup, NULL); -} - static const char *r8a7778_compat_dt[] __initdata = { "renesas,r8a7778", NULL, @@ -475,7 +446,6 @@ static const char *r8a7778_compat_dt[] __initdata = { DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") .init_early = r8a7778_init_delay, .init_irq = r8a7778_init_irq_dt, - .init_machine = r8a7778_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a7778_compat_dt, .init_late = r8a7778_init_late, diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 398687761f50..66d38261ecaa 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -665,10 +665,6 @@ void __init r8a7779_init_delay(void) shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */ } -static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = { - {}, -}; - void __init r8a7779_add_standard_devices_dt(void) { /* clocks are setup late during boot in the case of DT */ @@ -676,8 +672,7 @@ void __init r8a7779_add_standard_devices_dt(void) platform_add_devices(r8a7779_devices_dt, ARRAY_SIZE(r8a7779_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - r8a7779_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *r8a7779_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 28f94752b8ff..4c96dad21195 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -19,12 +19,12 @@ */ #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/kernel.h> #include <linux/of_platform.h> -#include <linux/serial_sci.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-irqc.h> +#include <linux/serial_sci.h> +#include <linux/sh_timer.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r8a7790.h> @@ -149,6 +149,36 @@ static struct resource irqc0_resources[] __initdata = { &irqc##idx##_data, \ sizeof(struct renesas_irqc_config)) +static struct resource thermal_resources[] __initdata = { + DEFINE_RES_MEM(0xe61f0000, 0x14), + DEFINE_RES_MEM(0xe61f0100, 0x38), + DEFINE_RES_IRQ(gic_spi(69)), +}; + +#define r8a7790_register_thermal() \ + platform_device_register_simple("rcar_thermal", -1, \ + thermal_resources, \ + ARRAY_SIZE(thermal_resources)) + +static struct sh_timer_config cmt00_platform_data = { + .name = "CMT00", + .timer_bit = 0, + .clockevent_rating = 80, +}; + +static struct resource cmt00_resources[] = { + DEFINE_RES_MEM(0xffca0510, 0x0c), + DEFINE_RES_MEM(0xffca0500, 0x04), + DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ +}; + +#define r8a7790_register_cmt(idx) \ + platform_device_register_resndata(&platform_bus, "sh_cmt", \ + idx, cmt##idx##_resources, \ + ARRAY_SIZE(cmt##idx##_resources), \ + &cmt##idx##_platform_data, \ + sizeof(struct sh_timer_config)) + void __init r8a7790_add_standard_devices(void) { r8a7790_register_scif(SCIFA0); @@ -162,34 +192,91 @@ void __init r8a7790_add_standard_devices(void) r8a7790_register_scif(HSCIF0); r8a7790_register_scif(HSCIF1); r8a7790_register_irqc(0); + r8a7790_register_thermal(); + r8a7790_register_cmt(00); } +#define MODEMR 0xe6160060 + +u32 __init r8a7790_read_mode_pins(void) +{ + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + u32 mode; + + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + return mode; +} + +#define CNTCR 0 +#define CNTFID0 0x20 + void __init r8a7790_timer_init(void) { - void __iomem *cntcr; +#ifdef CONFIG_ARM_ARCH_TIMER + u32 mode = r8a7790_read_mode_pins(); + void __iomem *base; + int extal_mhz = 0; + u32 freq; + + /* At Linux boot time the r8a7790 arch timer comes up + * with the counter disabled. Moreover, it may also report + * a potentially incorrect fixed 13 MHz frequency. To be + * correct these registers need to be updated to use the + * frequency EXTAL / 2 which can be determined by the MD pins. + */ + + switch (mode & (MD(14) | MD(13))) { + case 0: + extal_mhz = 15; + break; + case MD(13): + extal_mhz = 20; + break; + case MD(14): + extal_mhz = 26; + break; + case MD(13) | MD(14): + extal_mhz = 30; + break; + } - /* make sure arch timer is started by setting bit 0 of CNTCT */ - cntcr = ioremap(0xe6080000, PAGE_SIZE); - iowrite32(1, cntcr); - iounmap(cntcr); + /* The arch timer frequency equals EXTAL / 2 */ + freq = extal_mhz * (1000000 / 2); + + /* Remap "armgcnt address map" space */ + base = ioremap(0xe6080000, PAGE_SIZE); + + /* Update registers with correct frequency */ + iowrite32(freq, base + CNTFID0); + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + + /* make sure arch timer is started by setting bit 0 of CNTCR */ + iowrite32(1, base + CNTCR); + iounmap(base); +#endif /* CONFIG_ARM_ARCH_TIMER */ shmobile_timer_init(); } -#ifdef CONFIG_USE_OF -void __init r8a7790_add_standard_devices_dt(void) +void __init r8a7790_init_delay(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +#ifndef CONFIG_ARM_ARCH_TIMER + shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ +#endif } +#ifdef CONFIG_USE_OF + static const char *r8a7790_boards_compat_dt[] __initdata = { "renesas,r8a7790", NULL, }; DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .init_irq = irqchip_init, - .init_machine = r8a7790_add_standard_devices_dt, + .init_early = r8a7790_init_delay, .init_time = r8a7790_timer_init, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 5502d624aca6..13e6fdbde0a5 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -1147,10 +1147,6 @@ void __init sh7372_add_early_devices_dt(void) shmobile_setup_console(); } -static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = { - { } -}; - void __init sh7372_add_standard_devices_dt(void) { /* clocks are setup late during boot in the case of DT */ @@ -1159,8 +1155,7 @@ void __init sh7372_add_standard_devices_dt(void) platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); - of_platform_populate(NULL, of_default_bus_match_table, - sh7372_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *sh7372_boards_compat_dt[] __initdata = { diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 96e7ca1e4e11..516c2391b47a 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/irqchip.h> #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/delay.h> @@ -61,29 +60,16 @@ void __init sh73a0_map_io(void) iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc)); } -static struct resource sh73a0_pfc_resources[] = { - [0] = { - .start = 0xe6050000, - .end = 0xe6057fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xe605801c, - .end = 0xe6058027, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device sh73a0_pfc_device = { - .name = "pfc-sh73a0", - .id = -1, - .resource = sh73a0_pfc_resources, - .num_resources = ARRAY_SIZE(sh73a0_pfc_resources), +/* PFC */ +static struct resource pfc_resources[] __initdata = { + DEFINE_RES_MEM(0xe6050000, 0x8000), + DEFINE_RES_MEM(0xe605801c, 0x000c), }; void __init sh73a0_pinmux_init(void) { - platform_device_register(&sh73a0_pfc_device); + platform_device_register_simple("pfc-sh73a0", -1, pfc_resources, + ARRAY_SIZE(pfc_resources)); } static struct plat_sci_port scif0_platform_data = { @@ -958,10 +944,6 @@ void __init sh73a0_add_early_devices(void) #ifdef CONFIG_USE_OF -static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = { - {}, -}; - void __init sh73a0_add_standard_devices_dt(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, }; @@ -971,8 +953,7 @@ void __init sh73a0_add_standard_devices_dt(void) platform_add_devices(sh73a0_devices_dt, ARRAY_SIZE(sh73a0_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, - sh73a0_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); /* Instantiate cpufreq-cpu0 */ platform_device_register_full(&devinfo); @@ -988,7 +969,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .map_io = sh73a0_map_io, .init_early = sh73a0_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = irqchip_init, .init_machine = sh73a0_add_standard_devices_dt, .dt_compat = sh73a0_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S index 53f4840e4949..9782862899e8 100644 --- a/arch/arm/mach-shmobile/sleep-sh7372.S +++ b/arch/arm/mach-shmobile/sleep-sh7372.S @@ -41,6 +41,7 @@ sh7372_resume_core_standby_sysc: ldr pc, 1f + .align 2 .globl sh7372_cpu_resume sh7372_cpu_resume: 1: .space 4 @@ -96,6 +97,7 @@ sh7372_do_idle_sysc: 1: b 1b + .align 2 kernel_flush: .word v7_flush_dcache_all #endif diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 22a05a869d25..78e84c582453 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -29,6 +29,8 @@ #include <asm/smp_scu.h> #define EMEV2_SCU_BASE 0x1e000000 +#define EMEV2_SMU_BASE 0xe0110000 +#define SMU_GENERAL_REG0 0x7c0 static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { @@ -38,10 +40,18 @@ static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) { + void __iomem *smu; + + /* setup EMEV2 specific SCU base, enable */ + shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); scu_enable(shmobile_scu_base); /* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */ - emev2_set_boot_vector(__pa(shmobile_boot_vector)); + smu = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); + if (smu) { + iowrite32(__pa(shmobile_boot_vector), smu + SMU_GENERAL_REG0); + iounmap(smu); + } shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); shmobile_boot_arg = (unsigned long)shmobile_scu_base; @@ -49,21 +59,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); } -static void __init emev2_smp_init_cpus(void) -{ - unsigned int ncores; - - /* setup EMEV2 specific SCU base */ - shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - emev2_clock_init(); /* need ioremapped SMU */ - - ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1; - - shmobile_smp_init_cpus(ncores); -} - struct smp_operations emev2_smp_ops __initdata = { - .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, .smp_boot_secondary = emev2_boot_secondary, }; diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index b8bbabec6310..c700e623f9d8 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -66,4 +66,12 @@ config ARCH_VEXPRESS_DCSCB This is needed to provide CPU and cluster power management on RTSM implementing big.LITTLE. +config ARCH_VEXPRESS_TC2_PM + bool "Versatile Express TC2 power management" + depends on MCPM + select ARM_CCI + help + Support for CPU and cluster power management on Versatile Express + with a TC2 (A15x2 A7x3) big.LITTLE core tile. + endmenu diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 48ba89a8149f..36ea8247123a 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -7,5 +7,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o +obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM) += tc2_pm.o spc.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index 16d57a8a9d5a..3a6384c6c435 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -136,14 +136,35 @@ static void dcscb_power_down(void) /* * Flush all cache levels for this cluster. * - * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need - * a preliminary flush here for those CPUs. At least, that's - * the theory -- without the extra flush, Linux explodes on - * RTSM (to be investigated). + * To do so we do: + * - Clear the SCTLR.C bit to prevent further cache allocations + * - Flush the whole cache + * - Clear the ACTLR "SMP" bit to disable local coherency + * + * Let's do it in the safest possible way i.e. with + * no memory access within the following sequence + * including to the stack. + * + * Note: fp is preserved to the stack explicitly prior doing + * this since adding it to the clobber list is incompatible + * with having CONFIG_FRAME_POINTER=y. */ - flush_cache_all(); - set_cr(get_cr() & ~CR_C); - flush_cache_all(); + asm volatile( + "str fp, [sp, #-4]! \n\t" + "mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t" + "bic r0, r0, #"__stringify(CR_C)" \n\t" + "mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t" + "isb \n\t" + "bl v7_flush_dcache_all \n\t" + "clrex \n\t" + "mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t" + "bic r0, r0, #(1 << 6) @ disable local coherency \n\t" + "mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t" + "isb \n\t" + "dsb \n\t" + "ldr fp, [sp], #4" + : : : "r0","r1","r2","r3","r4","r5","r6","r7", + "r9","r10","lr","memory"); /* * This is a harmless no-op. On platforms with a real @@ -152,9 +173,6 @@ static void dcscb_power_down(void) */ outer_flush_all(); - /* Disable local coherency by clearing the ACTLR "SMP" bit: */ - set_auxcr(get_auxcr() & ~(1 << 6)); - /* * Disable cluster-level coherency by masking * incoming snoops and DVM messages: @@ -167,18 +185,24 @@ static void dcscb_power_down(void) /* * Flush the local CPU cache. - * - * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need - * a preliminary flush here for those CPUs. At least, that's - * the theory -- without the extra flush, Linux explodes on - * RTSM (to be investigated). + * Let's do it in the safest possible way as above. */ - flush_cache_louis(); - set_cr(get_cr() & ~CR_C); - flush_cache_louis(); - - /* Disable local coherency by clearing the ACTLR "SMP" bit: */ - set_auxcr(get_auxcr() & ~(1 << 6)); + asm volatile( + "str fp, [sp, #-4]! \n\t" + "mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t" + "bic r0, r0, #"__stringify(CR_C)" \n\t" + "mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t" + "isb \n\t" + "bl v7_flush_dcache_louis \n\t" + "clrex \n\t" + "mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t" + "bic r0, r0, #(1 << 6) @ disable local coherency \n\t" + "mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t" + "isb \n\t" + "dsb \n\t" + "ldr fp, [sp], #4" + : : : "r0","r1","r2","r3","r4","r5","r6","r7", + "r9","r10","lr","memory"); } __mcpm_cpu_down(cpu, cluster); diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c new file mode 100644 index 000000000000..eefb029197ca --- /dev/null +++ b/arch/arm/mach-vexpress/spc.c @@ -0,0 +1,180 @@ +/* + * Versatile Express Serial Power Controller (SPC) support + * + * Copyright (C) 2013 ARM Ltd. + * + * Authors: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> + * Achin Gupta <achin.gupta@arm.com> + * Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <asm/cacheflush.h> + +#define SPCLOG "vexpress-spc: " + +/* SPC wake-up IRQs status and mask */ +#define WAKE_INT_MASK 0x24 +#define WAKE_INT_RAW 0x28 +#define WAKE_INT_STAT 0x2c +/* SPC power down registers */ +#define A15_PWRDN_EN 0x30 +#define A7_PWRDN_EN 0x34 +/* SPC per-CPU mailboxes */ +#define A15_BX_ADDR0 0x68 +#define A7_BX_ADDR0 0x78 + +/* wake-up interrupt masks */ +#define GBL_WAKEUP_INT_MSK (0x3 << 10) + +/* TC2 static dual-cluster configuration */ +#define MAX_CLUSTERS 2 + +struct ve_spc_drvdata { + void __iomem *baseaddr; + /* + * A15s cluster identifier + * It corresponds to A15 processors MPIDR[15:8] bitfield + */ + u32 a15_clusid; +}; + +static struct ve_spc_drvdata *info; + +static inline bool cluster_is_a15(u32 cluster) +{ + return cluster == info->a15_clusid; +} + +/** + * ve_spc_global_wakeup_irq() + * + * Function to set/clear global wakeup IRQs. Not protected by locking since + * it might be used in code paths where normal cacheable locks are not + * working. Locking must be provided by the caller to ensure atomicity. + * + * @set: if true, global wake-up IRQs are set, if false they are cleared + */ +void ve_spc_global_wakeup_irq(bool set) +{ + u32 reg; + + reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK); + + if (set) + reg |= GBL_WAKEUP_INT_MSK; + else + reg &= ~GBL_WAKEUP_INT_MSK; + + writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK); +} + +/** + * ve_spc_cpu_wakeup_irq() + * + * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since + * it might be used in code paths where normal cacheable locks are not + * working. Locking must be provided by the caller to ensure atomicity. + * + * @cluster: mpidr[15:8] bitfield describing cluster affinity level + * @cpu: mpidr[7:0] bitfield describing cpu affinity level + * @set: if true, wake-up IRQs are set, if false they are cleared + */ +void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set) +{ + u32 mask, reg; + + if (cluster >= MAX_CLUSTERS) + return; + + mask = 1 << cpu; + + if (!cluster_is_a15(cluster)) + mask <<= 4; + + reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK); + + if (set) + reg |= mask; + else + reg &= ~mask; + + writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK); +} + +/** + * ve_spc_set_resume_addr() - set the jump address used for warm boot + * + * @cluster: mpidr[15:8] bitfield describing cluster affinity level + * @cpu: mpidr[7:0] bitfield describing cpu affinity level + * @addr: physical resume address + */ +void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr) +{ + void __iomem *baseaddr; + + if (cluster >= MAX_CLUSTERS) + return; + + if (cluster_is_a15(cluster)) + baseaddr = info->baseaddr + A15_BX_ADDR0 + (cpu << 2); + else + baseaddr = info->baseaddr + A7_BX_ADDR0 + (cpu << 2); + + writel_relaxed(addr, baseaddr); +} + +/** + * ve_spc_powerdown() + * + * Function to enable/disable cluster powerdown. Not protected by locking + * since it might be used in code paths where normal cacheable locks are not + * working. Locking must be provided by the caller to ensure atomicity. + * + * @cluster: mpidr[15:8] bitfield describing cluster affinity level + * @enable: if true enables powerdown, if false disables it + */ +void ve_spc_powerdown(u32 cluster, bool enable) +{ + u32 pwdrn_reg; + + if (cluster >= MAX_CLUSTERS) + return; + + pwdrn_reg = cluster_is_a15(cluster) ? A15_PWRDN_EN : A7_PWRDN_EN; + writel_relaxed(enable, info->baseaddr + pwdrn_reg); +} + +int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid) +{ + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + pr_err(SPCLOG "unable to allocate mem\n"); + return -ENOMEM; + } + + info->baseaddr = baseaddr; + info->a15_clusid = a15_clusid; + + /* + * Multi-cluster systems may need this data when non-coherent, during + * cluster power-up/power-down. Make sure driver info reaches main + * memory. + */ + sync_cache_w(info); + sync_cache_w(&info); + + return 0; +} diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h new file mode 100644 index 000000000000..5f7e4a446a17 --- /dev/null +++ b/arch/arm/mach-vexpress/spc.h @@ -0,0 +1,24 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + + +#ifndef __SPC_H_ +#define __SPC_H_ + +int __init ve_spc_init(void __iomem *base, u32 a15_clusid); +void ve_spc_global_wakeup_irq(bool set); +void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set); +void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr); +void ve_spc_powerdown(u32 cluster, bool enable); + +#endif diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c new file mode 100644 index 000000000000..2b7c93a724ed --- /dev/null +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -0,0 +1,352 @@ +/* + * arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support + * + * Created by: Nicolas Pitre, October 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * Some portions of this file were originally written by Achin Gupta + * Copyright: (C) 2012 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> +#include <linux/errno.h> + +#include <asm/mcpm.h> +#include <asm/proc-fns.h> +#include <asm/cacheflush.h> +#include <asm/cputype.h> +#include <asm/cp15.h> + +#include <linux/arm-cci.h> + +#include "spc.h" + +/* SCC conf registers */ +#define A15_CONF 0x400 +#define A7_CONF 0x500 +#define SYS_INFO 0x700 +#define SPC_BASE 0xb00 + +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +#define TC2_CLUSTERS 2 +#define TC2_MAX_CPUS_PER_CLUSTER 3 + +static unsigned int tc2_nr_cpus[TC2_CLUSTERS]; + +/* Keep per-cpu usage count to cope with unordered up/down requests */ +static int tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS]; + +#define tc2_cluster_unused(cluster) \ + (!tc2_pm_use_count[0][cluster] && \ + !tc2_pm_use_count[1][cluster] && \ + !tc2_pm_use_count[2][cluster]) + +static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster) +{ + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) + return -EINVAL; + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&tc2_pm_lock); + + if (tc2_cluster_unused(cluster)) + ve_spc_powerdown(cluster, false); + + tc2_pm_use_count[cpu][cluster]++; + if (tc2_pm_use_count[cpu][cluster] == 1) { + ve_spc_set_resume_addr(cluster, cpu, + virt_to_phys(mcpm_entry_point)); + ve_spc_cpu_wakeup_irq(cluster, cpu, true); + } else if (tc2_pm_use_count[cpu][cluster] != 2) { + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG(); + } + + arch_spin_unlock(&tc2_pm_lock); + local_irq_enable(); + + return 0; +} + +static void tc2_pm_down(u64 residency) +{ + unsigned int mpidr, cpu, cluster; + bool last_man = false, skip_wfi = false; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); + + __mcpm_cpu_going_down(cpu, cluster); + + arch_spin_lock(&tc2_pm_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + tc2_pm_use_count[cpu][cluster]--; + if (tc2_pm_use_count[cpu][cluster] == 0) { + ve_spc_cpu_wakeup_irq(cluster, cpu, true); + if (tc2_cluster_unused(cluster)) { + ve_spc_powerdown(cluster, true); + ve_spc_global_wakeup_irq(true); + last_man = true; + } + } else if (tc2_pm_use_count[cpu][cluster] == 1) { + /* + * A power_up request went ahead of us. + * Even if we do not want to shut this CPU down, + * the caller expects a certain state as if the WFI + * was aborted. So let's continue with cache cleaning. + */ + skip_wfi = true; + } else + BUG(); + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&tc2_pm_lock); + + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) { + /* + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. + */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3 \n\t" + "isb \n\t" + "dsb " + : : "r" (0x400) ); + } + + /* + * We need to disable and flush the whole (L1 and L2) cache. + * Let's do it in the safest possible way i.e. with + * no memory access within the following sequence + * including the stack. + * + * Note: fp is preserved to the stack explicitly prior doing + * this since adding it to the clobber list is incompatible + * with having CONFIG_FRAME_POINTER=y. + */ + asm volatile( + "str fp, [sp, #-4]! \n\t" + "mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t" + "bic r0, r0, #"__stringify(CR_C)" \n\t" + "mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t" + "isb \n\t" + "bl v7_flush_dcache_all \n\t" + "clrex \n\t" + "mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t" + "bic r0, r0, #(1 << 6) @ disable local coherency \n\t" + "mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t" + "isb \n\t" + "dsb \n\t" + "ldr fp, [sp], #4" + : : : "r0","r1","r2","r3","r4","r5","r6","r7", + "r9","r10","lr","memory"); + + cci_disable_port_by_cpu(mpidr); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + /* + * If last man then undo any setup done previously. + */ + if (last_man) { + ve_spc_powerdown(cluster, false); + ve_spc_global_wakeup_irq(false); + } + + arch_spin_unlock(&tc2_pm_lock); + + /* + * We need to disable and flush only the L1 cache. + * Let's do it in the safest possible way as above. + */ + asm volatile( + "str fp, [sp, #-4]! \n\t" + "mrc p15, 0, r0, c1, c0, 0 @ get CR \n\t" + "bic r0, r0, #"__stringify(CR_C)" \n\t" + "mcr p15, 0, r0, c1, c0, 0 @ set CR \n\t" + "isb \n\t" + "bl v7_flush_dcache_louis \n\t" + "clrex \n\t" + "mrc p15, 0, r0, c1, c0, 1 @ get AUXCR \n\t" + "bic r0, r0, #(1 << 6) @ disable local coherency \n\t" + "mcr p15, 0, r0, c1, c0, 1 @ set AUXCR \n\t" + "isb \n\t" + "dsb \n\t" + "ldr fp, [sp], #4" + : : : "r0","r1","r2","r3","r4","r5","r6","r7", + "r9","r10","lr","memory"); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (!skip_wfi) + wfi(); + + /* Not dead at this point? Let our caller cope. */ +} + +static void tc2_pm_power_down(void) +{ + tc2_pm_down(0); +} + +static void tc2_pm_suspend(u64 residency) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point)); + tc2_pm_down(residency); +} + +static void tc2_pm_powered_up(void) +{ + unsigned int mpidr, cpu, cluster; + unsigned long flags; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); + + local_irq_save(flags); + arch_spin_lock(&tc2_pm_lock); + + if (tc2_cluster_unused(cluster)) { + ve_spc_powerdown(cluster, false); + ve_spc_global_wakeup_irq(false); + } + + if (!tc2_pm_use_count[cpu][cluster]) + tc2_pm_use_count[cpu][cluster] = 1; + + ve_spc_cpu_wakeup_irq(cluster, cpu, false); + ve_spc_set_resume_addr(cluster, cpu, 0); + + arch_spin_unlock(&tc2_pm_lock); + local_irq_restore(flags); +} + +static const struct mcpm_platform_ops tc2_pm_power_ops = { + .power_up = tc2_pm_power_up, + .power_down = tc2_pm_power_down, + .suspend = tc2_pm_suspend, + .powered_up = tc2_pm_powered_up, +}; + +static bool __init tc2_pm_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) { + pr_err("%s: boot CPU is out of bound!\n", __func__); + return false; + } + tc2_pm_use_count[cpu][cluster] = 1; + return true; +} + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + */ +static void __naked tc2_pm_power_up_setup(unsigned int affinity_level) +{ + asm volatile (" \n" +" cmp r0, #1 \n" +" bxne lr \n" +" b cci_enable_port_for_self "); +} + +static int __init tc2_pm_init(void) +{ + int ret; + void __iomem *scc; + u32 a15_cluster_id, a7_cluster_id, sys_info; + struct device_node *np; + + /* + * The power management-related features are hidden behind + * SCC registers. We need to extract runtime information like + * cluster ids and number of CPUs really available in clusters. + */ + np = of_find_compatible_node(NULL, NULL, + "arm,vexpress-scc,v2p-ca15_a7"); + scc = of_iomap(np, 0); + if (!scc) + return -ENODEV; + + a15_cluster_id = readl_relaxed(scc + A15_CONF) & 0xf; + a7_cluster_id = readl_relaxed(scc + A7_CONF) & 0xf; + if (a15_cluster_id >= TC2_CLUSTERS || a7_cluster_id >= TC2_CLUSTERS) + return -EINVAL; + + sys_info = readl_relaxed(scc + SYS_INFO); + tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf; + tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf; + + /* + * A subset of the SCC registers is also used to communicate + * with the SPC (power controller). We need to be able to + * drive it very early in the boot process to power up + * processors, so we initialize the SPC driver here. + */ + ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id); + if (ret) + return ret; + + if (!cci_probed()) + return -ENODEV; + + if (!tc2_pm_usage_count_init()) + return -EINVAL; + + ret = mcpm_platform_register(&tc2_pm_power_ops); + if (!ret) { + mcpm_sync_init(tc2_pm_power_up_setup); + pr_info("TC2 power management initialized\n"); + } + return ret; +} + +early_initcall(tc2_pm_init); diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index 33c6947eebec..19ab6ff53d59 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -35,13 +35,9 @@ * * - Provides an API for platform code or device drivers to * dynamically add or remove address decoding windows for the CPU -> - * device accesses. This API is mvebu_mbus_add_window(), - * mvebu_mbus_add_window_remap_flags() and - * mvebu_mbus_del_window(). Since the (target, attribute) values - * differ from one SoC family to another, the API uses a 'const char - * *' string to identify devices, and this driver is responsible for - * knowing the mapping between the name of a device and its - * corresponding (target, attribute) in the current SoC family. + * device accesses. This API is mvebu_mbus_add_window_by_id(), + * mvebu_mbus_add_window_remap_by_id() and + * mvebu_mbus_del_window(). * * - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to * see the list of CPU -> SDRAM windows and their configuration @@ -97,33 +93,6 @@ #define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) -struct mvebu_mbus_mapping { - const char *name; - u8 target; - u8 attr; - u8 attrmask; -}; - -/* - * Masks used for the 'attrmask' field of mvebu_mbus_mapping. They - * allow to get the real attribute value, discarding the special bits - * used to select a PCI MEM region or a PCI WA region. This allows the - * debugfs code to reverse-match the name of a device from its - * target/attr values. - * - * For all devices except PCI, all bits of 'attr' must be - * considered. For most SoCs, only bit 3 should be ignored (it allows - * to select between PCI MEM and PCI I/O). On Orion5x however, there - * is the special bit 5 to select a PCI WA region. - */ -#define MAPDEF_NOMASK 0xff -#define MAPDEF_PCIMASK 0xf7 -#define MAPDEF_ORIONPCIMASK 0xd7 - -/* Macro used to define one mvebu_mbus_mapping entry */ -#define MAPDEF(__n, __t, __a, __m) \ - { .name = __n, .target = __t, .attr = __a, .attrmask = __m } - struct mvebu_mbus_state; struct mvebu_mbus_soc_data { @@ -133,7 +102,6 @@ struct mvebu_mbus_soc_data { void (*setup_cpu_target)(struct mvebu_mbus_state *s); int (*show_cpu_target)(struct mvebu_mbus_state *s, struct seq_file *seq, void *v); - const struct mvebu_mbus_mapping *map; }; struct mvebu_mbus_state { @@ -142,6 +110,8 @@ struct mvebu_mbus_state { struct dentry *debugfs_root; struct dentry *debugfs_sdram; struct dentry *debugfs_devs; + struct resource pcie_mem_aperture; + struct resource pcie_io_aperture; const struct mvebu_mbus_soc_data *soc; int hw_io_coherency; }; @@ -428,8 +398,7 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v) u64 wbase, wremap; u32 wsize; u8 wtarget, wattr; - int enabled, i; - const char *name; + int enabled; mvebu_mbus_read_window(mbus, win, &enabled, &wbase, &wsize, @@ -440,18 +409,9 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v) continue; } - - for (i = 0; mbus->soc->map[i].name; i++) - if (mbus->soc->map[i].target == wtarget && - mbus->soc->map[i].attr == - (wattr & mbus->soc->map[i].attrmask)) - break; - - name = mbus->soc->map[i].name ?: "unknown"; - - seq_printf(seq, "[%02d] %016llx - %016llx : %s", + seq_printf(seq, "[%02d] %016llx - %016llx : %04x:%04x", win, (unsigned long long)wbase, - (unsigned long long)(wbase + wsize), name); + (unsigned long long)(wbase + wsize), wtarget, wattr); if (win < mbus->soc->num_remappable_wins) { seq_printf(seq, " (remap %016llx)\n", @@ -576,62 +536,12 @@ mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus) mvebu_mbus_dram_info.num_cs = cs; } -static const struct mvebu_mbus_mapping armada_370_map[] = { - MAPDEF("bootrom", 1, 0xe0, MAPDEF_NOMASK), - MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK), - MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK), - MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK), - MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK), - MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK), - MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), - MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), - {}, -}; - -static const struct mvebu_mbus_soc_data armada_370_mbus_data = { +static const struct mvebu_mbus_soc_data armada_370_xp_mbus_data = { .num_wins = 20, .num_remappable_wins = 8, .win_cfg_offset = armada_370_xp_mbus_win_offset, .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, .show_cpu_target = mvebu_sdram_debug_show_orion, - .map = armada_370_map, -}; - -static const struct mvebu_mbus_mapping armada_xp_map[] = { - MAPDEF("bootrom", 1, 0x1d, MAPDEF_NOMASK), - MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK), - MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK), - MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK), - MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK), - MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK), - MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), - MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK), - MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK), - MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK), - MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), - MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK), - MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK), - MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK), - MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK), - MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK), - {}, -}; - -static const struct mvebu_mbus_soc_data armada_xp_mbus_data = { - .num_wins = 20, - .num_remappable_wins = 8, - .win_cfg_offset = armada_370_xp_mbus_win_offset, - .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, - .show_cpu_target = mvebu_sdram_debug_show_orion, - .map = armada_xp_map, -}; - -static const struct mvebu_mbus_mapping kirkwood_map[] = { - MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), - MAPDEF("pcie1.0", 4, 0xd0, MAPDEF_PCIMASK), - MAPDEF("sram", 3, 0x01, MAPDEF_NOMASK), - MAPDEF("nand", 1, 0x2f, MAPDEF_NOMASK), - {}, }; static const struct mvebu_mbus_soc_data kirkwood_mbus_data = { @@ -640,16 +550,6 @@ static const struct mvebu_mbus_soc_data kirkwood_mbus_data = { .win_cfg_offset = orion_mbus_win_offset, .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, .show_cpu_target = mvebu_sdram_debug_show_orion, - .map = kirkwood_map, -}; - -static const struct mvebu_mbus_mapping dove_map[] = { - MAPDEF("pcie0.0", 0x4, 0xe0, MAPDEF_PCIMASK), - MAPDEF("pcie1.0", 0x8, 0xe0, MAPDEF_PCIMASK), - MAPDEF("cesa", 0x3, 0x01, MAPDEF_NOMASK), - MAPDEF("bootrom", 0x1, 0xfd, MAPDEF_NOMASK), - MAPDEF("scratchpad", 0xd, 0x0, MAPDEF_NOMASK), - {}, }; static const struct mvebu_mbus_soc_data dove_mbus_data = { @@ -658,18 +558,6 @@ static const struct mvebu_mbus_soc_data dove_mbus_data = { .win_cfg_offset = orion_mbus_win_offset, .setup_cpu_target = mvebu_mbus_dove_setup_cpu_target, .show_cpu_target = mvebu_sdram_debug_show_dove, - .map = dove_map, -}; - -static const struct mvebu_mbus_mapping orion5x_map[] = { - MAPDEF("pcie0.0", 4, 0x51, MAPDEF_ORIONPCIMASK), - MAPDEF("pci0.0", 3, 0x51, MAPDEF_ORIONPCIMASK), - MAPDEF("devbus-boot", 1, 0x0f, MAPDEF_NOMASK), - MAPDEF("devbus-cs0", 1, 0x1e, MAPDEF_NOMASK), - MAPDEF("devbus-cs1", 1, 0x1d, MAPDEF_NOMASK), - MAPDEF("devbus-cs2", 1, 0x1b, MAPDEF_NOMASK), - MAPDEF("sram", 0, 0x00, MAPDEF_NOMASK), - {}, }; /* @@ -682,7 +570,6 @@ static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = { .win_cfg_offset = orion_mbus_win_offset, .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, .show_cpu_target = mvebu_sdram_debug_show_orion, - .map = orion5x_map, }; static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = { @@ -691,21 +578,6 @@ static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = { .win_cfg_offset = orion_mbus_win_offset, .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, .show_cpu_target = mvebu_sdram_debug_show_orion, - .map = orion5x_map, -}; - -static const struct mvebu_mbus_mapping mv78xx0_map[] = { - MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), - MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK), - MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK), - MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK), - MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), - MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK), - MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK), - MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK), - MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK), - MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK), - {}, }; static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = { @@ -714,7 +586,6 @@ static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = { .win_cfg_offset = mv78xx0_mbus_win_offset, .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, .show_cpu_target = mvebu_sdram_debug_show_orion, - .map = mv78xx0_map, }; /* @@ -725,9 +596,9 @@ static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = { */ static const struct of_device_id of_mvebu_mbus_ids[] = { { .compatible = "marvell,armada370-mbus", - .data = &armada_370_mbus_data, }, + .data = &armada_370_xp_mbus_data, }, { .compatible = "marvell,armadaxp-mbus", - .data = &armada_xp_mbus_data, }, + .data = &armada_370_xp_mbus_data, }, { .compatible = "marvell,kirkwood-mbus", .data = &kirkwood_mbus_data, }, { .compatible = "marvell,dove-mbus", @@ -748,48 +619,27 @@ static const struct of_device_id of_mvebu_mbus_ids[] = { /* * Public API of the driver */ -int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base, - size_t size, phys_addr_t remap, - unsigned int flags) +int mvebu_mbus_add_window_remap_by_id(unsigned int target, + unsigned int attribute, + phys_addr_t base, size_t size, + phys_addr_t remap) { struct mvebu_mbus_state *s = &mbus_state; - u8 target, attr; - int i; - - if (!s->soc->map) - return -ENODEV; - - for (i = 0; s->soc->map[i].name; i++) - if (!strcmp(s->soc->map[i].name, devname)) - break; - - if (!s->soc->map[i].name) { - pr_err("unknown device '%s'\n", devname); - return -ENODEV; - } - - target = s->soc->map[i].target; - attr = s->soc->map[i].attr; - - if (flags == MVEBU_MBUS_PCI_MEM) - attr |= 0x8; - else if (flags == MVEBU_MBUS_PCI_WA) - attr |= 0x28; - if (!mvebu_mbus_window_conflicts(s, base, size, target, attr)) { - pr_err("cannot add window '%s', conflicts with another window\n", - devname); + if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) { + pr_err("cannot add window '%x:%x', conflicts with another window\n", + target, attribute); return -EINVAL; } - return mvebu_mbus_alloc_window(s, base, size, remap, target, attr); - + return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); } -int mvebu_mbus_add_window(const char *devname, phys_addr_t base, size_t size) +int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, + phys_addr_t base, size_t size) { - return mvebu_mbus_add_window_remap_flags(devname, base, size, - MVEBU_MBUS_NO_REMAP, 0); + return mvebu_mbus_add_window_remap_by_id(target, attribute, base, + size, MVEBU_MBUS_NO_REMAP); } int mvebu_mbus_del_window(phys_addr_t base, size_t size) @@ -804,6 +654,20 @@ int mvebu_mbus_del_window(phys_addr_t base, size_t size) return 0; } +void mvebu_mbus_get_pcie_mem_aperture(struct resource *res) +{ + if (!res) + return; + *res = mbus_state.pcie_mem_aperture; +} + +void mvebu_mbus_get_pcie_io_aperture(struct resource *res) +{ + if (!res) + return; + *res = mbus_state.pcie_io_aperture; +} + static __init int mvebu_mbus_debugfs_init(void) { struct mvebu_mbus_state *s = &mbus_state; @@ -830,14 +694,41 @@ static __init int mvebu_mbus_debugfs_init(void) } fs_initcall(mvebu_mbus_debugfs_init); +static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus, + phys_addr_t mbuswins_phys_base, + size_t mbuswins_size, + phys_addr_t sdramwins_phys_base, + size_t sdramwins_size) +{ + int win; + + mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size); + if (!mbus->mbuswins_base) + return -ENOMEM; + + mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size); + if (!mbus->sdramwins_base) { + iounmap(mbus_state.mbuswins_base); + return -ENOMEM; + } + + if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric")) + mbus->hw_io_coherency = 1; + + for (win = 0; win < mbus->soc->num_wins; win++) + mvebu_mbus_disable_window(mbus, win); + + mbus->soc->setup_cpu_target(mbus); + + return 0; +} + int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base, size_t mbuswins_size, phys_addr_t sdramwins_phys_base, size_t sdramwins_size) { - struct mvebu_mbus_state *mbus = &mbus_state; const struct of_device_id *of_id; - int win; for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++) if (!strcmp(of_id->compatible, soc)) @@ -848,25 +739,201 @@ int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base, return -ENODEV; } - mbus->soc = of_id->data; + mbus_state.soc = of_id->data; - mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size); - if (!mbus->mbuswins_base) - return -ENOMEM; + return mvebu_mbus_common_init(&mbus_state, + mbuswins_phys_base, + mbuswins_size, + sdramwins_phys_base, + sdramwins_size); +} - mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size); - if (!mbus->sdramwins_base) { - iounmap(mbus_state.mbuswins_base); +#ifdef CONFIG_OF +/* + * The window IDs in the ranges DT property have the following format: + * - bits 28 to 31: MBus custom field + * - bits 24 to 27: window target ID + * - bits 16 to 23: window attribute ID + * - bits 0 to 15: unused + */ +#define CUSTOM(id) (((id) & 0xF0000000) >> 24) +#define TARGET(id) (((id) & 0x0F000000) >> 24) +#define ATTR(id) (((id) & 0x00FF0000) >> 16) + +static int __init mbus_dt_setup_win(struct mvebu_mbus_state *mbus, + u32 base, u32 size, + u8 target, u8 attr) +{ + if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { + pr_err("cannot add window '%04x:%04x', conflicts with another window\n", + target, attr); + return -EBUSY; + } + + if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP, + target, attr)) { + pr_err("cannot add window '%04x:%04x', too many windows\n", + target, attr); return -ENOMEM; } + return 0; +} - if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric")) - mbus->hw_io_coherency = 1; +static int __init +mbus_parse_ranges(struct device_node *node, + int *addr_cells, int *c_addr_cells, int *c_size_cells, + int *cell_count, const __be32 **ranges_start, + const __be32 **ranges_end) +{ + const __be32 *prop; + int ranges_len, tuple_len; + + /* Allow a node with no 'ranges' property */ + *ranges_start = of_get_property(node, "ranges", &ranges_len); + if (*ranges_start == NULL) { + *addr_cells = *c_addr_cells = *c_size_cells = *cell_count = 0; + *ranges_start = *ranges_end = NULL; + return 0; + } + *ranges_end = *ranges_start + ranges_len / sizeof(__be32); - for (win = 0; win < mbus->soc->num_wins; win++) - mvebu_mbus_disable_window(mbus, win); + *addr_cells = of_n_addr_cells(node); - mbus->soc->setup_cpu_target(mbus); + prop = of_get_property(node, "#address-cells", NULL); + *c_addr_cells = be32_to_cpup(prop); + + prop = of_get_property(node, "#size-cells", NULL); + *c_size_cells = be32_to_cpup(prop); + + *cell_count = *addr_cells + *c_addr_cells + *c_size_cells; + tuple_len = (*cell_count) * sizeof(__be32); + + if (ranges_len % tuple_len) { + pr_warn("malformed ranges entry '%s'\n", node->name); + return -EINVAL; + } + return 0; +} + +static int __init mbus_dt_setup(struct mvebu_mbus_state *mbus, + struct device_node *np) +{ + int addr_cells, c_addr_cells, c_size_cells; + int i, ret, cell_count; + const __be32 *r, *ranges_start, *ranges_end; + + ret = mbus_parse_ranges(np, &addr_cells, &c_addr_cells, + &c_size_cells, &cell_count, + &ranges_start, &ranges_end); + if (ret < 0) + return ret; + + for (i = 0, r = ranges_start; r < ranges_end; r += cell_count, i++) { + u32 windowid, base, size; + u8 target, attr; + + /* + * An entry with a non-zero custom field do not + * correspond to a static window, so skip it. + */ + windowid = of_read_number(r, 1); + if (CUSTOM(windowid)) + continue; + + target = TARGET(windowid); + attr = ATTR(windowid); + base = of_read_number(r + c_addr_cells, addr_cells); + size = of_read_number(r + c_addr_cells + addr_cells, + c_size_cells); + ret = mbus_dt_setup_win(mbus, base, size, target, attr); + if (ret < 0) + return ret; + } return 0; } + +static void __init mvebu_mbus_get_pcie_resources(struct device_node *np, + struct resource *mem, + struct resource *io) +{ + u32 reg[2]; + int ret; + + /* + * These are optional, so we clear them and they'll + * be zero if they are missing from the DT. + */ + memset(mem, 0, sizeof(struct resource)); + memset(io, 0, sizeof(struct resource)); + + ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg)); + if (!ret) { + mem->start = reg[0]; + mem->end = mem->start + reg[1]; + mem->flags = IORESOURCE_MEM; + } + + ret = of_property_read_u32_array(np, "pcie-io-aperture", reg, ARRAY_SIZE(reg)); + if (!ret) { + io->start = reg[0]; + io->end = io->start + reg[1]; + io->flags = IORESOURCE_IO; + } +} + +int __init mvebu_mbus_dt_init(void) +{ + struct resource mbuswins_res, sdramwins_res; + struct device_node *np, *controller; + const struct of_device_id *of_id; + const __be32 *prop; + int ret; + + np = of_find_matching_node(NULL, of_mvebu_mbus_ids); + if (!np) { + pr_err("could not find a matching SoC family\n"); + return -ENODEV; + } + + of_id = of_match_node(of_mvebu_mbus_ids, np); + mbus_state.soc = of_id->data; + + prop = of_get_property(np, "controller", NULL); + if (!prop) { + pr_err("required 'controller' property missing\n"); + return -EINVAL; + } + + controller = of_find_node_by_phandle(be32_to_cpup(prop)); + if (!controller) { + pr_err("could not find an 'mbus-controller' node\n"); + return -ENODEV; + } + + if (of_address_to_resource(controller, 0, &mbuswins_res)) { + pr_err("cannot get MBUS register address\n"); + return -EINVAL; + } + + if (of_address_to_resource(controller, 1, &sdramwins_res)) { + pr_err("cannot get SDRAM register address\n"); + return -EINVAL; + } + + /* Get optional pcie-{mem,io}-aperture properties */ + mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture, + &mbus_state.pcie_io_aperture); + + ret = mvebu_mbus_common_init(&mbus_state, + mbuswins_res.start, + resource_size(&mbuswins_res), + sdramwins_res.start, + resource_size(&sdramwins_res)); + if (ret) + return ret; + + /* Setup statically declared windows in the DT */ + return mbus_dt_setup(&mbus_state, np); +} +#endif diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c index 978e8e3abc5c..110c03627051 100644 --- a/drivers/memory/mvebu-devbus.c +++ b/drivers/memory/mvebu-devbus.c @@ -44,14 +44,6 @@ #define READ_PARAM_OFFSET 0x0 #define WRITE_PARAM_OFFSET 0x4 -static const char * const devbus_wins[] = { - "devbus-boot", - "devbus-cs0", - "devbus-cs1", - "devbus-cs2", - "devbus-cs3", -}; - struct devbus_read_params { u32 bus_width; u32 badr_skew; @@ -208,16 +200,11 @@ static int mvebu_devbus_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = pdev->dev.of_node; - struct device_node *parent; struct devbus *devbus; struct resource *res; struct clk *clk; unsigned long rate; - const __be32 *ranges; - int err, cs; - int addr_cells, p_addr_cells, size_cells; - int ranges_len, tuple_len; - u32 base, size; + int err; devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL); if (!devbus) @@ -248,68 +235,13 @@ static int mvebu_devbus_probe(struct platform_device *pdev) return err; /* - * Allocate an address window for this device. - * If the device probing fails, then we won't be able to - * remove the allocated address decoding window. - * - * FIXME: This is only a temporary hack! We need to do this here - * because we still don't have device tree bindings for mbus. - * Once that support is added, we will declare these address windows - * statically in the device tree, and remove the window configuration - * from here. - */ - - /* - * Get the CS to choose the window string. - * This is a bit hacky, but it will be removed once the - * address windows are declared in the device tree. - */ - cs = (((unsigned long)devbus->base) % 0x400) / 8; - - /* - * Parse 'ranges' property to obtain a (base,size) window tuple. - * This will be removed once the address windows - * are declared in the device tree. - */ - parent = of_get_parent(node); - if (!parent) - return -EINVAL; - - p_addr_cells = of_n_addr_cells(parent); - of_node_put(parent); - - addr_cells = of_n_addr_cells(node); - size_cells = of_n_size_cells(node); - tuple_len = (p_addr_cells + addr_cells + size_cells) * sizeof(__be32); - - ranges = of_get_property(node, "ranges", &ranges_len); - if (ranges == NULL || ranges_len != tuple_len) - return -EINVAL; - - base = of_translate_address(node, ranges + addr_cells); - if (base == OF_BAD_ADDR) - return -EINVAL; - size = of_read_number(ranges + addr_cells + p_addr_cells, size_cells); - - /* - * Create an mbus address windows. - * FIXME: Remove this, together with the above code, once the - * address windows are declared in the device tree. - */ - err = mvebu_mbus_add_window(devbus_wins[cs], base, size); - if (err < 0) - return err; - - /* * We need to create a child device explicitly from here to * guarantee that the child will be probed after the timing * parameters for the bus are written. */ err = of_platform_populate(node, NULL, NULL, dev); - if (err < 0) { - mvebu_mbus_del_window(base, size); + if (err < 0) return err; - } return 0; } diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index 7bf3926aecc0..847c10971182 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -119,6 +119,10 @@ struct mvebu_pcie_port { u32 port; u32 lane; int devfn; + unsigned int mem_target; + unsigned int mem_attr; + unsigned int io_target; + unsigned int io_attr; struct clk *clk; struct mvebu_sw_pci_bridge bridge; struct device_node *dn; @@ -303,10 +307,9 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) (port->bridge.iolimitupper << 16)) - iobase); - mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base, - port->iowin_size, - iobase, - MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr, + port->iowin_base, port->iowin_size, + iobase); pci_ioremap_io(iobase, port->iowin_base); } @@ -338,10 +341,8 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - port->memwin_base; - mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base, - port->memwin_size, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr, + port->memwin_base, port->memwin_size); } /* @@ -636,6 +637,8 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys) for (i = 0; i < pcie->nports; i++) { struct mvebu_pcie_port *port = &pcie->ports[i]; + if (!port->base) + continue; mvebu_pcie_setup_hw(port); } @@ -730,12 +733,54 @@ mvebu_pcie_map_registers(struct platform_device *pdev, return devm_request_and_ioremap(&pdev->dev, ®s); } +#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03) +#define DT_TYPE_IO 0x1 +#define DT_TYPE_MEM32 0x2 +#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF) +#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF) + +static int mvebu_get_tgt_attr(struct device_node *np, int devfn, + unsigned long type, int *tgt, int *attr) +{ + const int na = 3, ns = 2; + const __be32 *range; + int rlen, nranges, rangesz, pna, i; + + range = of_get_property(np, "ranges", &rlen); + if (!range) + return -EINVAL; + + pna = of_n_addr_cells(np); + rangesz = pna + na + ns; + nranges = rlen / sizeof(__be32) / rangesz; + + for (i = 0; i < nranges; i++) { + u32 flags = of_read_number(range, 1); + u32 slot = of_read_number(range, 2); + u64 cpuaddr = of_read_number(range + na, pna); + unsigned long rtype; + + if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO) + rtype = IORESOURCE_IO; + else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32) + rtype = IORESOURCE_MEM; + + if (slot == PCI_SLOT(devfn) && type == rtype) { + *tgt = DT_CPUADDR_TO_TARGET(cpuaddr); + *attr = DT_CPUADDR_TO_ATTR(cpuaddr); + return 0; + } + + range += rangesz; + } + + return -ENOENT; +} + static int __init mvebu_pcie_probe(struct platform_device *pdev) { struct mvebu_pcie *pcie; struct device_node *np = pdev->dev.of_node; - struct of_pci_range range; - struct of_pci_range_parser parser; struct device_node *child; int i, ret; @@ -746,29 +791,25 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev) pcie->pdev = pdev; - if (of_pci_range_parser_init(&parser, np)) + /* Get the PCIe memory and I/O aperture */ + mvebu_mbus_get_pcie_mem_aperture(&pcie->mem); + if (resource_size(&pcie->mem) == 0) { + dev_err(&pdev->dev, "invalid memory aperture size\n"); return -EINVAL; + } - /* Get the I/O and memory ranges from DT */ - for_each_of_pci_range(&parser, &range) { - unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; - if (restype == IORESOURCE_IO) { - of_pci_range_to_resource(&range, np, &pcie->io); - of_pci_range_to_resource(&range, np, &pcie->realio); - pcie->io.name = "I/O"; - pcie->realio.start = max_t(resource_size_t, - PCIBIOS_MIN_IO, - range.pci_addr); - pcie->realio.end = min_t(resource_size_t, - IO_SPACE_LIMIT, - range.pci_addr + range.size); - } - if (restype == IORESOURCE_MEM) { - of_pci_range_to_resource(&range, np, &pcie->mem); - pcie->mem.name = "MEM"; - } + mvebu_mbus_get_pcie_io_aperture(&pcie->io); + if (resource_size(&pcie->io) == 0) { + dev_err(&pdev->dev, "invalid I/O aperture size\n"); + return -EINVAL; } + pcie->realio.flags = pcie->io.flags; + pcie->realio.start = PCIBIOS_MIN_IO; + pcie->realio.end = min_t(resource_size_t, + IO_SPACE_LIMIT, + resource_size(&pcie->io)); + /* Get the bus range */ ret = of_pci_parse_bus_range(np, &pcie->busn); if (ret) { @@ -816,6 +857,22 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev) if (port->devfn < 0) continue; + ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_MEM, + &port->mem_target, &port->mem_attr); + if (ret < 0) { + dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for mem window\n", + port->port, port->lane); + continue; + } + + ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_IO, + &port->io_target, &port->io_attr); + if (ret < 0) { + dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for io window\n", + port->port, port->lane); + continue; + } + port->base = mvebu_pcie_map_registers(pdev, child, port); if (!port->base) { dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n", diff --git a/include/linux/mbus.h b/include/linux/mbus.h index dba482e31a13..345b8c53b897 100644 --- a/include/linux/mbus.h +++ b/include/linux/mbus.h @@ -11,6 +11,8 @@ #ifndef __LINUX_MBUS_H #define __LINUX_MBUS_H +struct resource; + struct mbus_dram_target_info { /* @@ -59,14 +61,18 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void) } #endif -int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base, - size_t size, phys_addr_t remap, - unsigned int flags); -int mvebu_mbus_add_window(const char *devname, phys_addr_t base, - size_t size); +void mvebu_mbus_get_pcie_mem_aperture(struct resource *res); +void mvebu_mbus_get_pcie_io_aperture(struct resource *res); +int mvebu_mbus_add_window_remap_by_id(unsigned int target, + unsigned int attribute, + phys_addr_t base, size_t size, + phys_addr_t remap); +int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, + phys_addr_t base, size_t size); int mvebu_mbus_del_window(phys_addr_t base, size_t size); int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base, size_t mbus_size, phys_addr_t sdram_phys_base, size_t sdram_size); +int mvebu_mbus_dt_init(void); #endif /* __LINUX_MBUS_H */ |