diff options
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 13 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 20 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra210.dtsi | 10 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts | 10 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi | 7 |
5 files changed, 52 insertions, 8 deletions
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 1c53ccc5e3cb..9b9d1d15b0c7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -49,6 +49,19 @@ }; }; + i2c@7000c000 { + status = "okay"; + + tmp451: temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(X, 4) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&vdd_1v8>; + #thermal-sensor-cells = <1>; + }; + }; + i2c@7000c400 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 63b94a04308e..83ed6ac2a8d8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1375,6 +1375,15 @@ #gpio-cells = <2>; gpio-controller; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(L, 1) IRQ_TYPE_EDGE_FALLING>; + + #interrupt-cells = <2>; + interrupt-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_1v8>; }; exp2: gpio@77 { @@ -1383,6 +1392,15 @@ #gpio-cells = <2>; gpio-controller; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_EDGE_FALLING>; + + #interrupt-cells = <2>; + interrupt-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_1v8>; }; }; @@ -1686,7 +1704,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; - gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; + gpio = <&exp1 9 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_1v8>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 942e3a0f81ed..b6c84d195c0e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -874,6 +874,16 @@ pins = "sdmmc3"; power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; }; + + gpio_1v8: gpio-1v8 { + pins = "gpio"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + gpio_3v3: gpio-3v3 { + pins = "gpio"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; }; powergates { diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts index 36e888053746..9ce55b4d2de8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts @@ -302,6 +302,16 @@ }; pcie@141a0000 { + reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x3a000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */ + 0x2e 0x20000000 0x0 0x10000000>; /* ECAM (256MB) */ + + ranges = <0x81000000 0x00 0x3a100000 0x00 0x3a100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0x82000000 0x00 0x40000000 0x2e 0x30000000 0x0 0x08000000 /* non-prefetchable memory (128MB) */ + 0xc3000000 0x28 0x00000000 0x28 0x00000000 0x6 0x20000000>; /* prefetchable memory (25088MB) */ + status = "okay"; vddio-pex-ctl-supply = <&vdd_1v8_ls>; phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi index 19340d13f789..41821354bbda 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi @@ -227,13 +227,6 @@ wakeup-event-action = <EV_ACT_ASSERTED>; wakeup-source; }; - - key-suspend { - label = "Suspend"; - gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_SLEEP>; - }; }; fan: pwm-fan { |