diff options
69 files changed, 3389 insertions, 813 deletions
diff --git a/Documentation/clk.txt b/Documentation/clk.txt index c9c399af7c08..1fee72f4d331 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -68,21 +68,27 @@ the operations defined in clk.h: int (*is_enabled)(struct clk_hw *hw); unsigned long (*recalc_rate)(struct clk_hw *hw, unsigned long parent_rate); - long (*round_rate)(struct clk_hw *hw, unsigned long, - unsigned long *); + long (*round_rate)(struct clk_hw *hw, + unsigned long rate, + unsigned long *parent_rate); long (*determine_rate)(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate, struct clk **best_parent_clk); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); - int (*set_rate)(struct clk_hw *hw, unsigned long); + int (*set_rate)(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate); int (*set_rate_and_parent)(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate, u8 index); + unsigned long parent_rate, + u8 index); unsigned long (*recalc_accuracy)(struct clk_hw *hw, - unsigned long parent_accuracy); + unsigned long parent_accuracy); void (*init)(struct clk_hw *hw); + int (*debug_init)(struct clk_hw *hw, + struct dentry *dentry); }; Part 3 - hardware clk implementations diff --git a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt index 56d1f4961075..5286e260fcae 100644 --- a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt +++ b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt @@ -10,12 +10,12 @@ This binding uses the common clock binding: Required properties: - compatible - Shall have one of the following values: - - "brcm,bcm11351-root-ccu" - - "brcm,bcm11351-aon-ccu" - - "brcm,bcm11351-hub-ccu" - - "brcm,bcm11351-master-ccu" - - "brcm,bcm11351-slave-ccu" + Shall have a value of the form "brcm,<model>-<which>-ccu", + where <model> is a Broadcom SoC model number and <which> is + the name of a defined CCU. For example: + "brcm,bcm11351-root-ccu" + The compatible strings used for each supported SoC family + are defined below. - reg Shall define the base and range of the address space containing clock control registers @@ -26,12 +26,48 @@ Required properties: Shall be an ordered list of strings defining the names of the clocks provided by the CCU. +Device tree example: + + slave_ccu: slave_ccu { + compatible = "brcm,bcm11351-slave-ccu"; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "uartb4"; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + uart@3e002000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x3e002000 0x1000>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + +BCM281XX family +--------------- +CCU compatible string values for SoCs in the BCM281XX family are: + "brcm,bcm11351-root-ccu" + "brcm,bcm11351-aon-ccu" + "brcm,bcm11351-hub-ccu" + "brcm,bcm11351-master-ccu" + "brcm,bcm11351-slave-ccu" -BCM281XX family SoCs use Kona CCUs. The following table defines -the set of CCUs and clock specifiers for BCM281XX clocks. When -a clock consumer references a clocks, its symbolic specifier -(rather than its numeric index value) should be used. These -specifiers are defined in "include/dt-bindings/clock/bcm281xx.h". +The following table defines the set of CCUs and clock specifiers for +BCM281XX family clocks. When a clock consumer references a clocks, +its symbolic specifier (rather than its numeric index value) should +be used. These specifiers are defined in: + "include/dt-bindings/clock/bcm281xx.h" CCU Clock Type Index Specifier --- ----- ---- ----- --------- @@ -64,30 +100,40 @@ specifiers are defined in "include/dt-bindings/clock/bcm281xx.h". slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM -Device tree example: +BCM21664 family +--------------- +CCU compatible string values for SoCs in the BCM21664 family are: + "brcm,bcm21664-root-ccu" + "brcm,bcm21664-aon-ccu" + "brcm,bcm21664-master-ccu" + "brcm,bcm21664-slave-ccu" - slave_ccu: slave_ccu { - compatible = "brcm,bcm11351-slave-ccu"; - reg = <0x3e011000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "uartb", - "uartb2", - "uartb3", - "uartb4"; - }; +The following table defines the set of CCUs and clock specifiers for +BCM21664 family clocks. When a clock consumer references a clocks, +its symbolic specifier (rather than its numeric index value) should +be used. These specifiers are defined in: + "include/dt-bindings/clock/bcm21664.h" - ref_crystal_clk: ref_crystal { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <26000000>; - }; + CCU Clock Type Index Specifier + --- ----- ---- ----- --------- + root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M - uart@3e002000 { - compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; - reg = <0x3e002000 0x1000>; - clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - }; + aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER + + master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1 + master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2 + master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3 + master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4 + master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP + master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP + master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP + master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP + + slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB + slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2 + slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3 + slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4 + slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1 + slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2 + slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3 + slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4 diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index 700e7aac3717..f15787817d6b 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -44,10 +44,9 @@ For example: clocks by index. The names should reflect the clock output signal names for the device. -clock-indices: If the identifyng number for the clocks in the node - is not linear from zero, then the this mapping allows - the mapping of identifiers into the clock-output-names - array. +clock-indices: If the identifying number for the clocks in the node + is not linear from zero, then this allows the mapping of + identifiers into the clock-output-names array. For example, if we have two clocks <&oscillator 1> and <&oscillator 3>: @@ -58,7 +57,7 @@ For example, if we have two clocks <&oscillator 1> and <&oscillator 3>: clock-output-names = "clka", "clkb"; } - This ensures we do not have any empty nodes in clock-output-names + This ensures we do not have any empty strings in clock-output-names ==Clock consumers== diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt index 48ea0ad8ad46..0641a663ad69 100644 --- a/Documentation/devicetree/bindings/clock/fixed-clock.txt +++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt @@ -12,7 +12,6 @@ Required properties: Optional properties: - clock-accuracy : accuracy of clock in ppb (parts per billion). Should be a single cell. -- gpios : From common gpio binding; gpio connection to clock enable pin. - clock-output-names : From common clock binding. Example: diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt new file mode 100644 index 000000000000..7894a64887cb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt @@ -0,0 +1,31 @@ +* Hisilicon Hix5hd2 Clock Controller + +The hix5hd2 clock controller generates and supplies clock to various +controllers within the hix5hd2 SoC. + +Required Properties: + +- compatible: should be "hisilicon,hix5hd2-clock" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>. + +Examples: + clock: clock@f8a22000 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0xf8a22000 0x1000>; + #clock-cells = <1>; + }; + + uart0: uart@f8b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8b00000 0x1000>; + interrupts = <0 49 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt new file mode 100644 index 000000000000..3ce97cfe999b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt @@ -0,0 +1,29 @@ +AXM5516 clock driver bindings +----------------------------- + +Required properties : +- compatible : shall contain "lsi,axm5516-clks" +- reg : shall contain base register location and length +- #clock-cells : shall contain 1 + +The consumer specifies the desired clock by having the clock ID in its "clocks" +phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of +supported clock IDs. + +Example: + + clks: clock-controller@2010020000 { + compatible = "lsi,axm5516-clks"; + #clock-cells = <1>; + reg = <0x20 0x10020000 0 0x20000>; + }; + + serial0: uart@2010080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10080000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + }; + }; + diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt index 307a503c5db8..dc5ea5b22da9 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -29,6 +29,11 @@ The following is a list of provided IDs and clock names on Kirkwood and Dove: 2 = l2clk (L2 Cache clock derived from CPU0 clock) 3 = ddrclk (DDR controller clock derived from CPU0 clock) +The following is a list of provided IDs and clock names on Orion5x: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU0 clock) + 2 = ddrclk (DDR controller clock derived from CPU0 clock) + Required properties: - compatible : shall be one of the following: "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks @@ -38,6 +43,9 @@ Required properties: "marvell,dove-core-clock" - for Dove SoC core clocks "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC + "marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC + "marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC + "marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC - reg : shall be the register address of the Sample-At-Reset (SAR) register - #clock-cells : from common clock binding; shall be set to 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 767401f42871..7b7104e8cb1e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -4,6 +4,7 @@ Qualcomm Global Clock & Reset Controller Binding Required properties : - compatible : shall contain only one of the following: + "qcom,gcc-apq8064" "qcom,gcc-msm8660" "qcom,gcc-msm8960" "qcom,gcc-msm8974" diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt index 02a25d99ca61..30df825d72ef 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -10,6 +10,7 @@ index in the group, from 0 to 31. Required Properties: - compatible: Must be one of the following + - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks - "renesas,cpg-mstp-clock" for generic MSTP gate clocks diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt new file mode 100644 index 000000000000..2c03302f86ed --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt @@ -0,0 +1,41 @@ +These bindings should be considered EXPERIMENTAL for now. + +* Renesas R8A7740 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs +and several fixed ratio and variable ratio dividers. + +Required Properties: + + - compatible: Must be "renesas,r8a7740-cpg-clocks" + + - reg: Base address and length of the memory resource used by the CPG + + - clocks: Reference to the three parent clocks + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are + "system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b", + "m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp". + + - renesas,mode: board-specific settings of the MD_CK* bits + + +Example +------- + +cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7740-cpg-clocks"; + reg = <0xe6150000 0x10000>; + clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>; + #clock-cells = <1>; + clock-output-names = "system", "pllc0", "pllc1", + "pllc2", "r", + "usb24s", + "i", "zg", "b", "m1", "hp", + "hpp", "usbp", "s", "zb", "m3", + "cp"; +}; + +&cpg_clocks { + renesas,mode = <0x05>; +}; diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt new file mode 100644 index 000000000000..ed3c8cb12f4e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt @@ -0,0 +1,27 @@ +* Renesas R8A7779 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R8A7779. It includes one PLL and +several fixed ratio dividers + +Required Properties: + + - compatible: Must be "renesas,r8a7779-cpg-clocks" + - reg: Base address and length of the memory resource used by the CPG + + - clocks: Reference to the parent clock + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are "plla", + "z", "zs", "s", "s1", "p", "b", "out". + + +Example +------- + + cpg_clocks: cpg_clocks@ffc80000 { + compatible = "renesas,r8a7779-cpg-clocks"; + reg = <0 0xffc80000 0 0x30>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "plla", "z", "zs", "s", "s1", "p", + "b", "out"; + }; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 08a44d41b672..8b366822bb43 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include "dt-bindings/clock/bcm21664.h" + #include "skeleton.dtsi" / { @@ -43,7 +45,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e000000 0x118>; - clocks = <&uartb_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -53,7 +55,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e001000 0x118>; - clocks = <&uartb2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -63,7 +65,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e002000 0x118>; - clocks = <&uartb3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -85,7 +87,7 @@ compatible = "brcm,kona-timer"; reg = <0x35006000 0x1c>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&hub_timer_clk>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; }; gpio: gpio@35003000 { @@ -106,7 +108,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f180000 0x801c>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio1_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; status = "disabled"; }; @@ -114,7 +116,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f190000 0x801c>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio2_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; status = "disabled"; }; @@ -122,7 +124,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x801c>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio3_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; status = "disabled"; }; @@ -130,7 +132,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1b0000 0x801c>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio4_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; status = "disabled"; }; @@ -140,7 +142,7 @@ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc1_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; status = "disabled"; }; @@ -150,7 +152,7 @@ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; status = "disabled"; }; @@ -160,7 +162,7 @@ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; status = "disabled"; }; @@ -170,105 +172,149 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc4_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; status = "disabled"; }; clocks { - bsc1_clk: bsc1 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; - #clock-cells = <0>; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges; - bsc2_clk: bsc2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc3_clk: bsc3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + bbl_32k_clk: bbl_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc4_clk: bsc4 { + ref_13m_clk: ref_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - pmu_bsc_clk: pmu_bsc { + var_13m_clk: var_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - hub_timer_clk: hub_timer { - compatible = "fixed-clock"; - clock-frequency = <32768>; + dft_19_5m_clk: dft_19_5m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; }; - pwm_clk: pwm { + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <26000000>; - #clock-cells = <0>; }; - sdio1_clk: sdio1 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_52m_clk: ref_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio2_clk: sdio2 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + var_52m_clk: var_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio3_clk: sdio3 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + usb_otg_ahb_clk: usb_otg_ahb { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio4_clk: sdio4 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_96m_clk: ref_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - tmon_1m_clk: tmon_1m { - compatible = "fixed-clock"; - clock-frequency = <1000000>; + var_96m_clk: var_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - uartb_clk: uartb { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_104m_clk: ref_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb2_clk: uartb2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + var_104m_clk: var_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb3_clk: uartb3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_156m_clk: ref_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; }; - usb_otg_ahb_clk: usb_otg_ahb { - compatible = "fixed-clock"; - clock-frequency = <52000000>; + var_156m_clk: var_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu { + compatible = BCM21664_DT_ROOT_CCU_COMPAT; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu { + compatible = BCM21664_DT_AON_CCU_COMPAT; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + master_ccu: master_ccu { + compatible = BCM21664_DT_MASTER_CCU_COMPAT; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + + slave_ccu: slave_ccu { + compatible = BCM21664_DT_SLAVE_CCU_COMPAT; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; }; }; diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 5f8a28735c96..f30357aa5471 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-composite.o # hardware specific clock types # please keep this section sorted lexicographically by file/directory path name obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o +obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o @@ -33,6 +34,7 @@ obj-$(CONFIG_COMMON_CLK_AT91) += at91/ obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/ obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/ obj-$(CONFIG_ARCH_HIP04) += hisilicon/ +obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/ obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig index a7262fb8ce55..75506e53075b 100644 --- a/drivers/clk/bcm/Kconfig +++ b/drivers/clk/bcm/Kconfig @@ -6,4 +6,4 @@ config CLK_BCM_KONA help Enable common clock framework support for Broadcom SoCs using "Kona" style clock control units, including those - in the BCM281xx family. + in the BCM281xx and BCM21664 families. diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index cf93359aa862..6297d05a9a10 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona.o obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o +obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o diff --git a/drivers/clk/bcm/clk-bcm21664.c b/drivers/clk/bcm/clk-bcm21664.c new file mode 100644 index 000000000000..eeae4cad2281 --- /dev/null +++ b/drivers/clk/bcm/clk-bcm21664.c @@ -0,0 +1,290 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * Copyright 2014 Linaro Limited + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "clk-kona.h" +#include "dt-bindings/clock/bcm21664.h" + +#define BCM21664_CCU_COMMON(_name, _capname) \ + KONA_CCU_COMMON(BCM21664, _name, _capname) + +/* Root CCU */ + +static struct peri_clk_data frac_1m_data = { + .gate = HW_SW_GATE(0x214, 16, 0, 1), + .clocks = CLOCKS("ref_crystal"), +}; + +static struct ccu_data root_ccu_data = { + BCM21664_CCU_COMMON(root, ROOT), + /* no policy control */ + .kona_clks = { + [BCM21664_ROOT_CCU_FRAC_1M] = + KONA_CLK(root, frac_1m, peri), + [BCM21664_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* AON CCU */ + +static struct peri_clk_data hub_timer_data = { + .gate = HW_SW_GATE(0x0414, 16, 0, 1), + .hyst = HYST(0x0414, 8, 9), + .clocks = CLOCKS("bbl_32k", + "frac_1m", + "dft_19_5m"), + .sel = SELECTOR(0x0a10, 0, 2), + .trig = TRIGGER(0x0a40, 4), +}; + +static struct ccu_data aon_ccu_data = { + BCM21664_CCU_COMMON(aon, AON), + .policy = { + .enable = CCU_LVM_EN(0x0034, 0), + .control = CCU_POLICY_CTL(0x000c, 0, 1, 2), + }, + .kona_clks = { + [BCM21664_AON_CCU_HUB_TIMER] = + KONA_CLK(aon, hub_timer, peri), + [BCM21664_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Master CCU */ + +static struct peri_clk_data sdio1_data = { + .gate = HW_SW_GATE(0x0358, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_52m", + "ref_52m", + "var_96m", + "ref_96m"), + .sel = SELECTOR(0x0a28, 0, 3), + .div = DIVIDER(0x0a28, 4, 14), + .trig = TRIGGER(0x0afc, 9), +}; + +static struct peri_clk_data sdio2_data = { + .gate = HW_SW_GATE(0x035c, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_52m", + "ref_52m", + "var_96m", + "ref_96m"), + .sel = SELECTOR(0x0a2c, 0, 3), + .div = DIVIDER(0x0a2c, 4, 14), + .trig = TRIGGER(0x0afc, 10), +}; + +static struct peri_clk_data sdio3_data = { + .gate = HW_SW_GATE(0x0364, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_52m", + "ref_52m", + "var_96m", + "ref_96m"), + .sel = SELECTOR(0x0a34, 0, 3), + .div = DIVIDER(0x0a34, 4, 14), + .trig = TRIGGER(0x0afc, 12), +}; + +static struct peri_clk_data sdio4_data = { + .gate = HW_SW_GATE(0x0360, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_52m", + "ref_52m", + "var_96m", + "ref_96m"), + .sel = SELECTOR(0x0a30, 0, 3), + .div = DIVIDER(0x0a30, 4, 14), + .trig = TRIGGER(0x0afc, 11), +}; + +static struct peri_clk_data sdio1_sleep_data = { + .clocks = CLOCKS("ref_32k"), /* Verify */ + .gate = HW_SW_GATE(0x0358, 18, 2, 3), +}; + +static struct peri_clk_data sdio2_sleep_data = { + .clocks = CLOCKS("ref_32k"), /* Verify */ + .gate = HW_SW_GATE(0x035c, 18, 2, 3), +}; + +static struct peri_clk_data sdio3_sleep_data = { + .clocks = CLOCKS("ref_32k"), /* Verify */ + .gate = HW_SW_GATE(0x0364, 18, 2, 3), +}; + +static struct peri_clk_data sdio4_sleep_data = { + .clocks = CLOCKS("ref_32k"), /* Verify */ + .gate = HW_SW_GATE(0x0360, 18, 2, 3), +}; + +static struct ccu_data master_ccu_data = { + BCM21664_CCU_COMMON(master, MASTER), + .policy = { + .enable = CCU_LVM_EN(0x0034, 0), + .control = CCU_POLICY_CTL(0x000c, 0, 1, 2), + }, + .kona_clks = { + [BCM21664_MASTER_CCU_SDIO1] = + KONA_CLK(master, sdio1, peri), + [BCM21664_MASTER_CCU_SDIO2] = + KONA_CLK(master, sdio2, peri), + [BCM21664_MASTER_CCU_SDIO3] = + KONA_CLK(master, sdio3, peri), + [BCM21664_MASTER_CCU_SDIO4] = + KONA_CLK(master, sdio4, peri), + [BCM21664_MASTER_CCU_SDIO1_SLEEP] = + KONA_CLK(master, sdio1_sleep, peri), + [BCM21664_MASTER_CCU_SDIO2_SLEEP] = + KONA_CLK(master, sdio2_sleep, peri), + [BCM21664_MASTER_CCU_SDIO3_SLEEP] = + KONA_CLK(master, sdio3_sleep, peri), + [BCM21664_MASTER_CCU_SDIO4_SLEEP] = + KONA_CLK(master, sdio4_sleep, peri), + [BCM21664_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Slave CCU */ + +static struct peri_clk_data uartb_data = { + .gate = HW_SW_GATE(0x0400, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_156m", + "ref_156m"), + .sel = SELECTOR(0x0a10, 0, 2), + .div = FRAC_DIVIDER(0x0a10, 4, 12, 8), + .trig = TRIGGER(0x0afc, 2), +}; + +static struct peri_clk_data uartb2_data = { + .gate = HW_SW_GATE(0x0404, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_156m", + "ref_156m"), + .sel = SELECTOR(0x0a14, 0, 2), + .div = FRAC_DIVIDER(0x0a14, 4, 12, 8), + .trig = TRIGGER(0x0afc, 3), +}; + +static struct peri_clk_data uartb3_data = { + .gate = HW_SW_GATE(0x0408, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_156m", + "ref_156m"), + .sel = SELECTOR(0x0a18, 0, 2), + .div = FRAC_DIVIDER(0x0a18, 4, 12, 8), + .trig = TRIGGER(0x0afc, 4), +}; + +static struct peri_clk_data bsc1_data = { + .gate = HW_SW_GATE(0x0458, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_104m", + "ref_104m", + "var_13m", + "ref_13m"), + .sel = SELECTOR(0x0a64, 0, 3), + .trig = TRIGGER(0x0afc, 23), +}; + +static struct peri_clk_data bsc2_data = { + .gate = HW_SW_GATE(0x045c, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_104m", + "ref_104m", + "var_13m", + "ref_13m"), + .sel = SELECTOR(0x0a68, 0, 3), + .trig = TRIGGER(0x0afc, 24), +}; + +static struct peri_clk_data bsc3_data = { + .gate = HW_SW_GATE(0x0470, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_104m", + "ref_104m", + "var_13m", + "ref_13m"), + .sel = SELECTOR(0x0a7c, 0, 3), + .trig = TRIGGER(0x0afc, 18), +}; + +static struct peri_clk_data bsc4_data = { + .gate = HW_SW_GATE(0x0474, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_104m", + "ref_104m", + "var_13m", + "ref_13m"), + .sel = SELECTOR(0x0a80, 0, 3), + .trig = TRIGGER(0x0afc, 19), +}; + +static struct ccu_data slave_ccu_data = { + BCM21664_CCU_COMMON(slave, SLAVE), + .policy = { + .enable = CCU_LVM_EN(0x0034, 0), + .control = CCU_POLICY_CTL(0x000c, 0, 1, 2), + }, + .kona_clks = { + [BCM21664_SLAVE_CCU_UARTB] = + KONA_CLK(slave, uartb, peri), + [BCM21664_SLAVE_CCU_UARTB2] = + KONA_CLK(slave, uartb2, peri), + [BCM21664_SLAVE_CCU_UARTB3] = + KONA_CLK(slave, uartb3, peri), + [BCM21664_SLAVE_CCU_BSC1] = + KONA_CLK(slave, bsc1, peri), + [BCM21664_SLAVE_CCU_BSC2] = + KONA_CLK(slave, bsc2, peri), + [BCM21664_SLAVE_CCU_BSC3] = + KONA_CLK(slave, bsc3, peri), + [BCM21664_SLAVE_CCU_BSC4] = + KONA_CLK(slave, bsc4, peri), + [BCM21664_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Device tree match table callback functions */ + +static void __init kona_dt_root_ccu_setup(struct device_node *node) +{ + kona_dt_ccu_setup(&root_ccu_data, node); +} + +static void __init kona_dt_aon_ccu_setup(struct device_node *node) +{ + kona_dt_ccu_setup(&aon_ccu_data, node); +} + +static void __init kona_dt_master_ccu_setup(struct device_node *node) +{ + kona_dt_ccu_setup(&master_ccu_data, node); +} + +static void __init kona_dt_slave_ccu_setup(struct device_node *node) +{ + kona_dt_ccu_setup(&slave_ccu_data, node); +} + +CLK_OF_DECLARE(bcm21664_root_ccu, BCM21664_DT_ROOT_CCU_COMPAT, + kona_dt_root_ccu_setup); +CLK_OF_DECLARE(bcm21664_aon_ccu, BCM21664_DT_AON_CCU_COMPAT, + kona_dt_aon_ccu_setup); +CLK_OF_DECLARE(bcm21664_master_ccu, BCM21664_DT_MASTER_CCU_COMPAT, + kona_dt_master_ccu_setup); +CLK_OF_DECLARE(bcm21664_slave_ccu, BCM21664_DT_SLAVE_CCU_COMPAT, + kona_dt_slave_ccu_setup); diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c index 3c66de696aeb..502a487d62c5 100644 --- a/drivers/clk/bcm/clk-bcm281xx.c +++ b/drivers/clk/bcm/clk-bcm281xx.c @@ -15,14 +15,10 @@ #include "clk-kona.h" #include "dt-bindings/clock/bcm281xx.h" -/* bcm11351 CCU device tree "compatible" strings */ -#define BCM11351_DT_ROOT_CCU_COMPAT "brcm,bcm11351-root-ccu" -#define BCM11351_DT_AON_CCU_COMPAT "brcm,bcm11351-aon-ccu" -#define BCM11351_DT_HUB_CCU_COMPAT "brcm,bcm11351-hub-ccu" -#define BCM11351_DT_MASTER_CCU_COMPAT "brcm,bcm11351-master-ccu" -#define BCM11351_DT_SLAVE_CCU_COMPAT "brcm,bcm11351-slave-ccu" +#define BCM281XX_CCU_COMMON(_name, _ucase_name) \ + KONA_CCU_COMMON(BCM281XX, _name, _ucase_name) -/* Root CCU clocks */ +/* Root CCU */ static struct peri_clk_data frac_1m_data = { .gate = HW_SW_GATE(0x214, 16, 0, 1), @@ -31,7 +27,16 @@ static struct peri_clk_data frac_1m_data = { .clocks = CLOCKS("ref_crystal"), }; -/* AON CCU clocks */ +static struct ccu_data root_ccu_data = { + BCM281XX_CCU_COMMON(root, ROOT), + .kona_clks = { + [BCM281XX_ROOT_CCU_FRAC_1M] = + KONA_CLK(root, frac_1m, peri), + [BCM281XX_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* AON CCU */ static struct peri_clk_data hub_timer_data = { .gate = HW_SW_GATE(0x0414, 16, 0, 1), @@ -60,7 +65,20 @@ static struct peri_clk_data pmu_bsc_var_data = { .trig = TRIGGER(0x0a40, 2), }; -/* Hub CCU clocks */ +static struct ccu_data aon_ccu_data = { + BCM281XX_CCU_COMMON(aon, AON), + .kona_clks = { + [BCM281XX_AON_CCU_HUB_TIMER] = + KONA_CLK(aon, hub_timer, peri), + [BCM281XX_AON_CCU_PMU_BSC] = + KONA_CLK(aon, pmu_bsc, peri), + [BCM281XX_AON_CCU_PMU_BSC_VAR] = + KONA_CLK(aon, pmu_bsc_var, peri), + [BCM281XX_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Hub CCU */ static struct peri_clk_data tmon_1m_data = { .gate = HW_SW_GATE(0x04a4, 18, 2, 3), @@ -70,7 +88,16 @@ static struct peri_clk_data tmon_1m_data = { .trig = TRIGGER(0x0e84, 1), }; -/* Master CCU clocks */ +static struct ccu_data hub_ccu_data = { + BCM281XX_CCU_COMMON(hub, HUB), + .kona_clks = { + [BCM281XX_HUB_CCU_TMON_1M] = + KONA_CLK(hub, tmon_1m, peri), + [BCM281XX_HUB_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Master CCU */ static struct peri_clk_data sdio1_data = { .gate = HW_SW_GATE(0x0358, 18, 2, 3), @@ -153,7 +180,28 @@ static struct peri_clk_data hsic2_12m_data = { .trig = TRIGGER(0x0afc, 5), }; -/* Slave CCU clocks */ +static struct ccu_data master_ccu_data = { + BCM281XX_CCU_COMMON(master, MASTER), + .kona_clks = { + [BCM281XX_MASTER_CCU_SDIO1] = + KONA_CLK(master, sdio1, peri), + [BCM281XX_MASTER_CCU_SDIO2] = + KONA_CLK(master, sdio2, peri), + [BCM281XX_MASTER_CCU_SDIO3] = + KONA_CLK(master, sdio3, peri), + [BCM281XX_MASTER_CCU_SDIO4] = + KONA_CLK(master, sdio4, peri), + [BCM281XX_MASTER_CCU_USB_IC] = + KONA_CLK(master, usb_ic, peri), + [BCM281XX_MASTER_CCU_HSIC2_48M] = + KONA_CLK(master, hsic2_48m, peri), + [BCM281XX_MASTER_CCU_HSIC2_12M] = + KONA_CLK(master, hsic2_12m, peri), + [BCM281XX_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Slave CCU */ static struct peri_clk_data uartb_data = { .gate = HW_SW_GATE(0x0400, 18, 2, 3), @@ -261,156 +309,67 @@ static struct peri_clk_data pwm_data = { .trig = TRIGGER(0x0afc, 15), }; -/* - * CCU setup routines - * - * These are called from kona_dt_ccu_setup() to initialize the array - * of clocks provided by the CCU. Once allocated, the entries in - * the array are initialized by calling kona_clk_setup() with the - * initialization data for each clock. They return 0 if successful - * or an error code otherwise. - */ -static int __init bcm281xx_root_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_ROOT_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate root clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_ROOT_CCU_FRAC_1M, frac_1m); - - return 0; -} - -static int __init bcm281xx_aon_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_AON_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate aon clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_HUB_TIMER, hub_timer); - PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC, pmu_bsc); - PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC_VAR, pmu_bsc_var); - - return 0; -} - -static int __init bcm281xx_hub_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_HUB_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate hub clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_HUB_CCU_TMON_1M, tmon_1m); - - return 0; -} - -static int __init bcm281xx_master_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_MASTER_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate master clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO1, sdio1); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO2, sdio2); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO3, sdio3); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO4, sdio4); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_USB_IC, usb_ic); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_48M, hsic2_48m); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_12M, hsic2_12m); - - return 0; -} - -static int __init bcm281xx_slave_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_SLAVE_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate slave clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB, uartb); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB2, uartb2); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB3, uartb3); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB4, uartb4); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP0, ssp0); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP2, ssp2); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC1, bsc1); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC2, bsc2); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC3, bsc3); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_PWM, pwm); - - return 0; -} +static struct ccu_data slave_ccu_data = { + BCM281XX_CCU_COMMON(slave, SLAVE), + .kona_clks = { + [BCM281XX_SLAVE_CCU_UARTB] = + KONA_CLK(slave, uartb, peri), + [BCM281XX_SLAVE_CCU_UARTB2] = + KONA_CLK(slave, uartb2, peri), + [BCM281XX_SLAVE_CCU_UARTB3] = + KONA_CLK(slave, uartb3, peri), + [BCM281XX_SLAVE_CCU_UARTB4] = + KONA_CLK(slave, uartb4, peri), + [BCM281XX_SLAVE_CCU_SSP0] = + KONA_CLK(slave, ssp0, peri), + [BCM281XX_SLAVE_CCU_SSP2] = + KONA_CLK(slave, ssp2, peri), + [BCM281XX_SLAVE_CCU_BSC1] = + KONA_CLK(slave, bsc1, peri), + [BCM281XX_SLAVE_CCU_BSC2] = + KONA_CLK(slave, bsc2, peri), + [BCM281XX_SLAVE_CCU_BSC3] = + KONA_CLK(slave, bsc3, peri), + [BCM281XX_SLAVE_CCU_PWM] = + KONA_CLK(slave, pwm, peri), + [BCM281XX_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; /* Device tree match table callback functions */ static void __init kona_dt_root_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_root_ccu_clks_setup); + kona_dt_ccu_setup(&root_ccu_data, node); } static void __init kona_dt_aon_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_aon_ccu_clks_setup); + kona_dt_ccu_setup(&aon_ccu_data, node); } static void __init kona_dt_hub_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_hub_ccu_clks_setup); + kona_dt_ccu_setup(&hub_ccu_data, node); } static void __init kona_dt_master_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_master_ccu_clks_setup); + kona_dt_ccu_setup(&master_ccu_data, node); } static void __init kona_dt_slave_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_slave_ccu_clks_setup); + kona_dt_ccu_setup(&slave_ccu_data, node); } -CLK_OF_DECLARE(bcm11351_root_ccu, BCM11351_DT_ROOT_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_root_ccu, BCM281XX_DT_ROOT_CCU_COMPAT, kona_dt_root_ccu_setup); -CLK_OF_DECLARE(bcm11351_aon_ccu, BCM11351_DT_AON_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_aon_ccu, BCM281XX_DT_AON_CCU_COMPAT, kona_dt_aon_ccu_setup); -CLK_OF_DECLARE(bcm11351_hub_ccu, BCM11351_DT_HUB_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_hub_ccu, BCM281XX_DT_HUB_CCU_COMPAT, kona_dt_hub_ccu_setup); -CLK_OF_DECLARE(bcm11351_master_ccu, BCM11351_DT_MASTER_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_master_ccu, BCM281XX_DT_MASTER_CCU_COMPAT, kona_dt_master_ccu_setup); -CLK_OF_DECLARE(bcm11351_slave_ccu, BCM11351_DT_SLAVE_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_slave_ccu, BCM281XX_DT_SLAVE_CCU_COMPAT, kona_dt_slave_ccu_setup); diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c index 54a06526f64f..e5aededdd322 100644 --- a/drivers/clk/bcm/clk-kona-setup.c +++ b/drivers/clk/bcm/clk-kona-setup.c @@ -25,6 +25,31 @@ LIST_HEAD(ccu_list); /* The list of set up CCUs */ /* Validity checking */ +static bool ccu_data_offsets_valid(struct ccu_data *ccu) +{ + struct ccu_policy *ccu_policy = &ccu->policy; + u32 limit; + + limit = ccu->range - sizeof(u32); + limit = round_down(limit, sizeof(u32)); + if (ccu_policy_exists(ccu_policy)) { + if (ccu_policy->enable.offset > limit) { + pr_err("%s: bad policy enable offset for %s " + "(%u > %u)\n", __func__, + ccu->name, ccu_policy->enable.offset, limit); + return false; + } + if (ccu_policy->control.offset > limit) { + pr_err("%s: bad policy control offset for %s " + "(%u > %u)\n", __func__, + ccu->name, ccu_policy->control.offset, limit); + return false; + } + } + + return true; +} + static bool clk_requires_trigger(struct kona_clk *bcm_clk) { struct peri_clk_data *peri = bcm_clk->u.peri; @@ -54,7 +79,9 @@ static bool clk_requires_trigger(struct kona_clk *bcm_clk) static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk) { struct peri_clk_data *peri; + struct bcm_clk_policy *policy; struct bcm_clk_gate *gate; + struct bcm_clk_hyst *hyst; struct bcm_clk_div *div; struct bcm_clk_sel *sel; struct bcm_clk_trig *trig; @@ -64,19 +91,41 @@ static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk) BUG_ON(bcm_clk->type != bcm_clk_peri); peri = bcm_clk->u.peri; - name = bcm_clk->name; + name = bcm_clk->init_data.name; range = bcm_clk->ccu->range; limit = range - sizeof(u32); limit = round_down(limit, sizeof(u32)); + policy = &peri->policy; + if (policy_exists(policy)) { + if (policy->offset > limit) { + pr_err("%s: bad policy offset for %s (%u > %u)\n", + __func__, name, policy->offset, limit); + return false; + } + } + gate = &peri->gate; + hyst = &peri->hyst; if (gate_exists(gate)) { if (gate->offset > limit) { pr_err("%s: bad gate offset for %s (%u > %u)\n", __func__, name, gate->offset, limit); return false; } + + if (hyst_exists(hyst)) { + if (hyst->offset > limit) { + pr_err("%s: bad hysteresis offset for %s " + "(%u > %u)\n", __func__, + name, hyst->offset, limit); + return false; + } + } + } else if (hyst_exists(hyst)) { + pr_err("%s: hysteresis but no gate for %s\n", __func__, name); + return false; } div = &peri->div; @@ -167,6 +216,36 @@ static bool bitfield_valid(u32 shift, u32 width, const char *field_name, return true; } +static bool +ccu_policy_valid(struct ccu_policy *ccu_policy, const char *ccu_name) +{ + struct bcm_lvm_en *enable = &ccu_policy->enable; + struct bcm_policy_ctl *control; + + if (!bit_posn_valid(enable->bit, "policy enable", ccu_name)) + return false; + + control = &ccu_policy->control; + if (!bit_posn_valid(control->go_bit, "policy control GO", ccu_name)) + return false; + + if (!bit_posn_valid(control->atl_bit, "policy control ATL", ccu_name)) + return false; + + if (!bit_posn_valid(control->ac_bit, "policy control AC", ccu_name)) + return false; + + return true; +} + +static bool policy_valid(struct bcm_clk_policy *policy, const char *clock_name) +{ + if (!bit_posn_valid(policy->bit, "policy", clock_name)) + return false; + + return true; +} + /* * All gates, if defined, have a status bit, and for hardware-only * gates, that's it. Gates that can be software controlled also @@ -196,6 +275,17 @@ static bool gate_valid(struct bcm_clk_gate *gate, const char *field_name, return true; } +static bool hyst_valid(struct bcm_clk_hyst *hyst, const char *clock_name) +{ + if (!bit_posn_valid(hyst->en_bit, "hysteresis enable", clock_name)) + return false; + + if (!bit_posn_valid(hyst->val_bit, "hysteresis value", clock_name)) + return false; + + return true; +} + /* * A selector bitfield must be valid. Its parent_sel array must * also be reasonable for the field. @@ -312,7 +402,9 @@ static bool peri_clk_data_valid(struct kona_clk *bcm_clk) { struct peri_clk_data *peri; + struct bcm_clk_policy *policy; struct bcm_clk_gate *gate; + struct bcm_clk_hyst *hyst; struct bcm_clk_sel *sel; struct bcm_clk_div *div; struct bcm_clk_div *pre_div; @@ -330,11 +422,20 @@ peri_clk_data_valid(struct kona_clk *bcm_clk) return false; peri = bcm_clk->u.peri; - name = bcm_clk->name; + name = bcm_clk->init_data.name; + + policy = &peri->policy; + if (policy_exists(policy) && !policy_valid(policy, name)) + return false; + gate = &peri->gate; if (gate_exists(gate) && !gate_valid(gate, "gate", name)) return false; + hyst = &peri->hyst; + if (hyst_exists(hyst) && !hyst_valid(hyst, name)) + return false; + sel = &peri->sel; if (selector_exists(sel)) { if (!sel_valid(sel, "selector", name)) @@ -567,7 +668,6 @@ static void peri_clk_teardown(struct peri_clk_data *data, struct clk_init_data *init_data) { clk_sel_teardown(&data->sel, init_data); - init_data->ops = NULL; } /* @@ -576,10 +676,9 @@ static void peri_clk_teardown(struct peri_clk_data *data, * that can be assigned if the clock has one or more parent clocks * associated with it. */ -static int peri_clk_setup(struct ccu_data *ccu, struct peri_clk_data *data, - struct clk_init_data *init_data) +static int +peri_clk_setup(struct peri_clk_data *data, struct clk_init_data *init_data) { - init_data->ops = &kona_peri_clk_ops; init_data->flags = CLK_IGNORE_UNUSED; return clk_sel_setup(data->clocks, &data->sel, init_data); @@ -617,39 +716,26 @@ static void kona_clk_teardown(struct clk *clk) bcm_clk_teardown(bcm_clk); } -struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name, - enum bcm_clk_type type, void *data) +struct clk *kona_clk_setup(struct kona_clk *bcm_clk) { - struct kona_clk *bcm_clk; - struct clk_init_data *init_data; + struct clk_init_data *init_data = &bcm_clk->init_data; struct clk *clk = NULL; - bcm_clk = kzalloc(sizeof(*bcm_clk), GFP_KERNEL); - if (!bcm_clk) { - pr_err("%s: failed to allocate bcm_clk for %s\n", __func__, - name); - return NULL; - } - bcm_clk->ccu = ccu; - bcm_clk->name = name; - - init_data = &bcm_clk->init_data; - init_data->name = name; - switch (type) { + switch (bcm_clk->type) { case bcm_clk_peri: - if (peri_clk_setup(ccu, data, init_data)) - goto out_free; + if (peri_clk_setup(bcm_clk->u.data, init_data)) + return NULL; break; default: - data = NULL; - break; + pr_err("%s: clock type %d invalid for %s\n", __func__, + (int)bcm_clk->type, init_data->name); + return NULL; } - bcm_clk->type = type; - bcm_clk->u.data = data; /* Make sure everything makes sense before we set it up */ if (!kona_clk_valid(bcm_clk)) { - pr_err("%s: clock data invalid for %s\n", __func__, name); + pr_err("%s: clock data invalid for %s\n", __func__, + init_data->name); goto out_teardown; } @@ -657,7 +743,7 @@ struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name, clk = clk_register(NULL, &bcm_clk->hw); if (IS_ERR(clk)) { pr_err("%s: error registering clock %s (%ld)\n", __func__, - name, PTR_ERR(clk)); + init_data->name, PTR_ERR(clk)); goto out_teardown; } BUG_ON(!clk); @@ -665,8 +751,6 @@ struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name, return clk; out_teardown: bcm_clk_teardown(bcm_clk); -out_free: - kfree(bcm_clk); return NULL; } @@ -675,50 +759,64 @@ static void ccu_clks_teardown(struct ccu_data *ccu) { u32 i; - for (i = 0; i < ccu->data.clk_num; i++) - kona_clk_teardown(ccu->data.clks[i]); - kfree(ccu->data.clks); + for (i = 0; i < ccu->clk_data.clk_num; i++) + kona_clk_teardown(ccu->clk_data.clks[i]); + kfree(ccu->clk_data.clks); } static void kona_ccu_teardown(struct ccu_data *ccu) { - if (!ccu) - return; - + kfree(ccu->clk_data.clks); + ccu->clk_data.clks = NULL; if (!ccu->base) - goto done; + return; of_clk_del_provider(ccu->node); /* safe if never added */ ccu_clks_teardown(ccu); list_del(&ccu->links); of_node_put(ccu->node); + ccu->node = NULL; iounmap(ccu->base); -done: - kfree(ccu->name); - kfree(ccu); + ccu->base = NULL; +} + +static bool ccu_data_valid(struct ccu_data *ccu) +{ + struct ccu_policy *ccu_policy; + + if (!ccu_data_offsets_valid(ccu)) + return false; + + ccu_policy = &ccu->policy; + if (ccu_policy_exists(ccu_policy)) + if (!ccu_policy_valid(ccu_policy, ccu->name)) + return false; + + return true; } /* * Set up a CCU. Call the provided ccu_clks_setup callback to * initialize the array of clocks provided by the CCU. */ -void __init kona_dt_ccu_setup(struct device_node *node, - int (*ccu_clks_setup)(struct ccu_data *)) +void __init kona_dt_ccu_setup(struct ccu_data *ccu, + struct device_node *node) { - struct ccu_data *ccu; struct resource res = { 0 }; resource_size_t range; + unsigned int i; int ret; - ccu = kzalloc(sizeof(*ccu), GFP_KERNEL); - if (ccu) - ccu->name = kstrdup(node->name, GFP_KERNEL); - if (!ccu || !ccu->name) { - pr_err("%s: unable to allocate CCU struct for %s\n", - __func__, node->name); - kfree(ccu); + if (ccu->clk_data.clk_num) { + size_t size; - return; + size = ccu->clk_data.clk_num * sizeof(*ccu->clk_data.clks); + ccu->clk_data.clks = kzalloc(size, GFP_KERNEL); + if (!ccu->clk_data.clks) { + pr_err("%s: unable to allocate %u clocks for %s\n", + __func__, ccu->clk_data.clk_num, node->name); + return; + } } ret = of_address_to_resource(node, 0, &res); @@ -736,24 +834,33 @@ void __init kona_dt_ccu_setup(struct device_node *node, } ccu->range = (u32)range; + + if (!ccu_data_valid(ccu)) { + pr_err("%s: ccu data not valid for %s\n", __func__, node->name); + goto out_err; + } + ccu->base = ioremap(res.start, ccu->range); if (!ccu->base) { pr_err("%s: unable to map CCU registers for %s\n", __func__, node->name); goto out_err; } - - spin_lock_init(&ccu->lock); - INIT_LIST_HEAD(&ccu->links); ccu->node = of_node_get(node); - list_add_tail(&ccu->links, &ccu_list); - /* Set up clocks array (in ccu->data) */ - if (ccu_clks_setup(ccu)) - goto out_err; + /* + * Set up each defined kona clock and save the result in + * the clock framework clock array (in ccu->data). Then + * register as a provider for these clocks. + */ + for (i = 0; i < ccu->clk_data.clk_num; i++) { + if (!ccu->kona_clks[i].ccu) + continue; + ccu->clk_data.clks[i] = kona_clk_setup(&ccu->kona_clks[i]); + } - ret = of_clk_add_provider(node, of_clk_src_onecell_get, &ccu->data); + ret = of_clk_add_provider(node, of_clk_src_onecell_get, &ccu->clk_data); if (ret) { pr_err("%s: error adding ccu %s as provider (%d)\n", __func__, node->name, ret); diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c index db11a87449f2..d603c4e22fca 100644 --- a/drivers/clk/bcm/clk-kona.c +++ b/drivers/clk/bcm/clk-kona.c @@ -16,6 +16,14 @@ #include <linux/delay.h> +/* + * "Policies" affect the frequencies of bus clocks provided by a + * CCU. (I believe these polices are named "Deep Sleep", "Economy", + * "Normal", and "Turbo".) A lower policy number has lower power + * consumption, and policy 2 is the default. + */ +#define CCU_POLICY_COUNT 4 + #define CCU_ACCESS_PASSWORD 0xA5A500 #define CLK_GATE_DELAY_LOOP 2000 @@ -207,9 +215,154 @@ __ccu_wait_bit(struct ccu_data *ccu, u32 reg_offset, u32 bit, bool want) return true; udelay(1); } + pr_warn("%s: %s/0x%04x bit %u was never %s\n", __func__, + ccu->name, reg_offset, bit, want ? "set" : "clear"); + return false; } +/* Policy operations */ + +static bool __ccu_policy_engine_start(struct ccu_data *ccu, bool sync) +{ + struct bcm_policy_ctl *control = &ccu->policy.control; + u32 offset; + u32 go_bit; + u32 mask; + bool ret; + + /* If we don't need to control policy for this CCU, we're done. */ + if (!policy_ctl_exists(control)) + return true; + + offset = control->offset; + go_bit = control->go_bit; + + /* Ensure we're not busy before we start */ + ret = __ccu_wait_bit(ccu, offset, go_bit, false); + if (!ret) { + pr_err("%s: ccu %s policy engine wouldn't go idle\n", + __func__, ccu->name); + return false; + } + + /* + * If it's a synchronous request, we'll wait for the voltage + * and frequency of the active load to stabilize before + * returning. To do this we select the active load by + * setting the ATL bit. + * + * An asynchronous request instead ramps the voltage in the + * background, and when that process stabilizes, the target + * load is copied to the active load and the CCU frequency + * is switched. We do this by selecting the target load + * (ATL bit clear) and setting the request auto-copy (AC bit + * set). + * + * Note, we do NOT read-modify-write this register. + */ + mask = (u32)1 << go_bit; + if (sync) + mask |= 1 << control->atl_bit; + else + mask |= 1 << control->ac_bit; + __ccu_write(ccu, offset, mask); + + /* Wait for indication that operation is complete. */ + ret = __ccu_wait_bit(ccu, offset, go_bit, false); + if (!ret) + pr_err("%s: ccu %s policy engine never started\n", + __func__, ccu->name); + + return ret; +} + +static bool __ccu_policy_engine_stop(struct ccu_data *ccu) +{ + struct bcm_lvm_en *enable = &ccu->policy.enable; + u32 offset; + u32 enable_bit; + bool ret; + + /* If we don't need to control policy for this CCU, we're done. */ + if (!policy_lvm_en_exists(enable)) + return true; + + /* Ensure we're not busy before we start */ + offset = enable->offset; + enable_bit = enable->bit; + ret = __ccu_wait_bit(ccu, offset, enable_bit, false); + if (!ret) { + pr_err("%s: ccu %s policy engine already stopped\n", + __func__, ccu->name); + return false; + } + + /* Now set the bit to stop the engine (NO read-modify-write) */ + __ccu_write(ccu, offset, (u32)1 << enable_bit); + + /* Wait for indication that it has stopped. */ + ret = __ccu_wait_bit(ccu, offset, enable_bit, false); + if (!ret) + pr_err("%s: ccu %s policy engine never stopped\n", + __func__, ccu->name); + + return ret; +} + +/* + * A CCU has four operating conditions ("policies"), and some clocks + * can be disabled or enabled based on which policy is currently in + * effect. Such clocks have a bit in a "policy mask" register for + * each policy indicating whether the clock is enabled for that + * policy or not. The bit position for a clock is the same for all + * four registers, and the 32-bit registers are at consecutive + * addresses. + */ +static bool policy_init(struct ccu_data *ccu, struct bcm_clk_policy *policy) +{ + u32 offset; + u32 mask; + int i; + bool ret; + + if (!policy_exists(policy)) + return true; + + /* + * We need to stop the CCU policy engine to allow update + * of our policy bits. + */ + if (!__ccu_policy_engine_stop(ccu)) { + pr_err("%s: unable to stop CCU %s policy engine\n", + __func__, ccu->name); + return false; + } + + /* + * For now, if a clock defines its policy bit we just mark + * it "enabled" for all four policies. + */ + offset = policy->offset; + mask = (u32)1 << policy->bit; + for (i = 0; i < CCU_POLICY_COUNT; i++) { + u32 reg_val; + + reg_val = __ccu_read(ccu, offset); + reg_val |= mask; + __ccu_write(ccu, offset, reg_val); + offset += sizeof(u32); + } + + /* We're done updating; fire up the policy engine again. */ + ret = __ccu_policy_engine_start(ccu, true); + if (!ret) + pr_err("%s: unable to restart CCU %s policy engine\n", + __func__, ccu->name); + + return ret; +} + /* Gate operations */ /* Determine whether a clock is gated. CCU lock must be held. */ @@ -374,6 +527,35 @@ static int clk_gate(struct ccu_data *ccu, const char *name, return -EIO; } +/* Hysteresis operations */ + +/* + * If a clock gate requires a turn-off delay it will have + * "hysteresis" register bits defined. The first, if set, enables + * the delay; and if enabled, the second bit determines whether the + * delay is "low" or "high" (1 means high). For now, if it's + * defined for a clock, we set it. + */ +static bool hyst_init(struct ccu_data *ccu, struct bcm_clk_hyst *hyst) +{ + u32 offset; + u32 reg_val; + u32 mask; + + if (!hyst_exists(hyst)) + return true; + + offset = hyst->offset; + mask = (u32)1 << hyst->en_bit; + mask |= (u32)1 << hyst->val_bit; + + reg_val = __ccu_read(ccu, offset); + reg_val |= mask; + __ccu_write(ccu, offset, reg_val); + + return true; +} + /* Trigger operations */ /* @@ -806,7 +988,7 @@ static int kona_peri_clk_enable(struct clk_hw *hw) struct kona_clk *bcm_clk = to_kona_clk(hw); struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate; - return clk_gate(bcm_clk->ccu, bcm_clk->name, gate, true); + return clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, true); } static void kona_peri_clk_disable(struct clk_hw *hw) @@ -814,7 +996,7 @@ static void kona_peri_clk_disable(struct clk_hw *hw) struct kona_clk *bcm_clk = to_kona_clk(hw); struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate; - (void)clk_gate(bcm_clk->ccu, bcm_clk->name, gate, false); + (void)clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, false); } static int kona_peri_clk_is_enabled(struct clk_hw *hw) @@ -872,12 +1054,13 @@ static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index) ret = selector_write(bcm_clk->ccu, &data->gate, sel, trig, index); if (ret == -ENXIO) { - pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name); + pr_err("%s: gating failure for %s\n", __func__, + bcm_clk->init_data.name); ret = -EIO; /* Don't proliferate weird errors */ } else if (ret == -EIO) { pr_err("%s: %strigger failed for %s\n", __func__, trig == &data->pre_trig ? "pre-" : "", - bcm_clk->name); + bcm_clk->init_data.name); } return ret; @@ -936,10 +1119,12 @@ static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate, ret = divider_write(bcm_clk->ccu, &data->gate, &data->div, &data->trig, scaled_div); if (ret == -ENXIO) { - pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name); + pr_err("%s: gating failure for %s\n", __func__, + bcm_clk->init_data.name); ret = -EIO; /* Don't proliferate weird errors */ } else if (ret == -EIO) { - pr_err("%s: trigger failed for %s\n", __func__, bcm_clk->name); + pr_err("%s: trigger failed for %s\n", __func__, + bcm_clk->init_data.name); } return ret; @@ -961,15 +1146,24 @@ static bool __peri_clk_init(struct kona_clk *bcm_clk) { struct ccu_data *ccu = bcm_clk->ccu; struct peri_clk_data *peri = bcm_clk->u.peri; - const char *name = bcm_clk->name; + const char *name = bcm_clk->init_data.name; struct bcm_clk_trig *trig; BUG_ON(bcm_clk->type != bcm_clk_peri); + if (!policy_init(ccu, &peri->policy)) { + pr_err("%s: error initializing policy for %s\n", + __func__, name); + return false; + } if (!gate_init(ccu, &peri->gate)) { pr_err("%s: error initializing gate for %s\n", __func__, name); return false; } + if (!hyst_init(ccu, &peri->hyst)) { + pr_err("%s: error initializing hyst for %s\n", __func__, name); + return false; + } if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) { pr_err("%s: error initializing divider for %s\n", __func__, name); @@ -1014,13 +1208,13 @@ bool __init kona_ccu_init(struct ccu_data *ccu) { unsigned long flags; unsigned int which; - struct clk **clks = ccu->data.clks; + struct clk **clks = ccu->clk_data.clks; bool success = true; flags = ccu_lock(ccu); __ccu_write_enable(ccu); - for (which = 0; which < ccu->data.clk_num; which++) { + for (which = 0; which < ccu->clk_data.clk_num; which++) { struct kona_clk *bcm_clk; if (!clks[which]) diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h index dee690951bb6..2537b3072910 100644 --- a/drivers/clk/bcm/clk-kona.h +++ b/drivers/clk/bcm/clk-kona.h @@ -43,8 +43,14 @@ #define FLAG_FLIP(obj, type, flag) ((obj)->flags ^= FLAG(type, flag)) #define FLAG_TEST(obj, type, flag) (!!((obj)->flags & FLAG(type, flag))) +/* CCU field state tests */ + +#define ccu_policy_exists(ccu_policy) ((ccu_policy)->enable.offset != 0) + /* Clock field state tests */ +#define policy_exists(policy) ((policy)->offset != 0) + #define gate_exists(gate) FLAG_TEST(gate, GATE, EXISTS) #define gate_is_enabled(gate) FLAG_TEST(gate, GATE, ENABLED) #define gate_is_hw_controllable(gate) FLAG_TEST(gate, GATE, HW) @@ -54,6 +60,8 @@ #define gate_flip_enabled(gate) FLAG_FLIP(gate, GATE, ENABLED) +#define hyst_exists(hyst) ((hyst)->offset != 0) + #define divider_exists(div) FLAG_TEST(div, DIV, EXISTS) #define divider_is_fixed(div) FLAG_TEST(div, DIV, FIXED) #define divider_has_fraction(div) (!divider_is_fixed(div) && \ @@ -62,6 +70,9 @@ #define selector_exists(sel) ((sel)->width != 0) #define trigger_exists(trig) FLAG_TEST(trig, TRIG, EXISTS) +#define policy_lvm_en_exists(enable) ((enable)->offset != 0) +#define policy_ctl_exists(control) ((control)->offset != 0) + /* Clock type, used to tell common block what it's part of */ enum bcm_clk_type { bcm_clk_none, /* undefined clock type */ @@ -71,25 +82,26 @@ enum bcm_clk_type { }; /* - * Each CCU defines a mapped area of memory containing registers - * used to manage clocks implemented by the CCU. Access to memory - * within the CCU's space is serialized by a spinlock. Before any - * (other) address can be written, a special access "password" value - * must be written to its WR_ACCESS register (located at the base - * address of the range). We keep track of the name of each CCU as - * it is set up, and maintain them in a list. + * CCU policy control for clocks. Clocks can be enabled or disabled + * based on the CCU policy in effect. One bit in each policy mask + * register (one per CCU policy) represents whether the clock is + * enabled when that policy is effect or not. The CCU policy engine + * must be stopped to update these bits, and must be restarted again + * afterward. */ -struct ccu_data { - void __iomem *base; /* base of mapped address space */ - spinlock_t lock; /* serialization lock */ - bool write_enabled; /* write access is currently enabled */ - struct list_head links; /* for ccu_list */ - struct device_node *node; - struct clk_onecell_data data; - const char *name; - u32 range; /* byte range of address space */ +struct bcm_clk_policy { + u32 offset; /* first policy mask register offset */ + u32 bit; /* bit used in all mask registers */ }; +/* Policy initialization macro */ + +#define POLICY(_offset, _bit) \ + { \ + .offset = (_offset), \ + .bit = (_bit), \ + } + /* * Gating control and status is managed by a 32-bit gate register. * @@ -195,6 +207,22 @@ struct bcm_clk_gate { .flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS), \ } +/* Gate hysteresis for clocks */ +struct bcm_clk_hyst { + u32 offset; /* hyst register offset (normally CLKGATE) */ + u32 en_bit; /* bit used to enable hysteresis */ + u32 val_bit; /* if enabled: 0 = low delay; 1 = high delay */ +}; + +/* Hysteresis initialization macro */ + +#define HYST(_offset, _en_bit, _val_bit) \ + { \ + .offset = (_offset), \ + .en_bit = (_en_bit), \ + .val_bit = (_val_bit), \ + } + /* * Each clock can have zero, one, or two dividers which change the * output rate of the clock. Each divider can be either fixed or @@ -360,7 +388,9 @@ struct bcm_clk_trig { } struct peri_clk_data { + struct bcm_clk_policy policy; struct bcm_clk_gate gate; + struct bcm_clk_hyst hyst; struct bcm_clk_trig pre_trig; struct bcm_clk_div pre_div; struct bcm_clk_trig trig; @@ -373,8 +403,7 @@ struct peri_clk_data { struct kona_clk { struct clk_hw hw; - struct clk_init_data init_data; - const char *name; /* name of this clock */ + struct clk_init_data init_data; /* includes name of this clock */ struct ccu_data *ccu; /* ccu this clock is associated with */ enum bcm_clk_type type; union { @@ -385,14 +414,92 @@ struct kona_clk { #define to_kona_clk(_hw) \ container_of(_hw, struct kona_clk, hw) -/* Exported globals */ +/* Initialization macro for an entry in a CCU's kona_clks[] array. */ +#define KONA_CLK(_ccu_name, _clk_name, _type) \ + { \ + .init_data = { \ + .name = #_clk_name, \ + .ops = &kona_ ## _type ## _clk_ops, \ + }, \ + .ccu = &_ccu_name ## _ccu_data, \ + .type = bcm_clk_ ## _type, \ + .u.data = &_clk_name ## _data, \ + } +#define LAST_KONA_CLK { .type = bcm_clk_none } -extern struct clk_ops kona_peri_clk_ops; +/* + * CCU policy control. To enable software update of the policy + * tables the CCU policy engine must be stopped by setting the + * software update enable bit (LVM_EN). After an update the engine + * is restarted using the GO bit and either the GO_ATL or GO_AC bit. + */ +struct bcm_lvm_en { + u32 offset; /* LVM_EN register offset */ + u32 bit; /* POLICY_CONFIG_EN bit in register */ +}; + +/* Policy enable initialization macro */ +#define CCU_LVM_EN(_offset, _bit) \ + { \ + .offset = (_offset), \ + .bit = (_bit), \ + } + +struct bcm_policy_ctl { + u32 offset; /* POLICY_CTL register offset */ + u32 go_bit; + u32 atl_bit; /* GO, GO_ATL, and GO_AC bits */ + u32 ac_bit; +}; + +/* Policy control initialization macro */ +#define CCU_POLICY_CTL(_offset, _go_bit, _ac_bit, _atl_bit) \ + { \ + .offset = (_offset), \ + .go_bit = (_go_bit), \ + .ac_bit = (_ac_bit), \ + .atl_bit = (_atl_bit), \ + } + +struct ccu_policy { + struct bcm_lvm_en enable; + struct bcm_policy_ctl control; +}; + +/* + * Each CCU defines a mapped area of memory containing registers + * used to manage clocks implemented by the CCU. Access to memory + * within the CCU's space is serialized by a spinlock. Before any + * (other) address can be written, a special access "password" value + * must be written to its WR_ACCESS register (located at the base + * address of the range). We keep track of the name of each CCU as + * it is set up, and maintain them in a list. + */ +struct ccu_data { + void __iomem *base; /* base of mapped address space */ + spinlock_t lock; /* serialization lock */ + bool write_enabled; /* write access is currently enabled */ + struct ccu_policy policy; + struct list_head links; /* for ccu_list */ + struct device_node *node; + struct clk_onecell_data clk_data; + const char *name; + u32 range; /* byte range of address space */ + struct kona_clk kona_clks[]; /* must be last */ +}; -/* Help functions */ +/* Initialization for common fields in a Kona ccu_data structure */ +#define KONA_CCU_COMMON(_prefix, _name, _ccuname) \ + .name = #_name "_ccu", \ + .lock = __SPIN_LOCK_UNLOCKED(_name ## _ccu_data.lock), \ + .links = LIST_HEAD_INIT(_name ## _ccu_data.links), \ + .clk_data = { \ + .clk_num = _prefix ## _ ## _ccuname ## _CCU_CLOCK_COUNT, \ + } + +/* Exported globals */ -#define PERI_CLK_SETUP(clks, ccu, id, name) \ - clks[id] = kona_clk_setup(ccu, #name, bcm_clk_peri, &name ## _data) +extern struct clk_ops kona_peri_clk_ops; /* Externally visible functions */ @@ -401,10 +508,9 @@ extern u64 scaled_div_max(struct bcm_clk_div *div); extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value, u32 billionths); -extern struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name, - enum bcm_clk_type type, void *data); -extern void __init kona_dt_ccu_setup(struct device_node *node, - int (*ccu_clks_setup)(struct ccu_data *)); +extern struct clk *kona_clk_setup(struct kona_clk *bcm_clk); +extern void __init kona_dt_ccu_setup(struct ccu_data *ccu, + struct device_node *node); extern bool __init kona_ccu_init(struct ccu_data *ccu); #endif /* _CLK_KONA_H */ diff --git a/drivers/clk/clk-axm5516.c b/drivers/clk/clk-axm5516.c new file mode 100644 index 000000000000..d2f1e119b450 --- /dev/null +++ b/drivers/clk/clk-axm5516.c @@ -0,0 +1,615 @@ +/* + * drivers/clk/clk-axm5516.c + * + * Provides clock implementations for three different types of clock devices on + * the Axxia device: PLL clock, a clock divider and a clock mux. + * + * Copyright (C) 2014 LSI Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <dt-bindings/clock/lsi,axm5516-clks.h> + + +/** + * struct axxia_clk - Common struct to all Axxia clocks. + * @hw: clk_hw for the common clk framework + * @regmap: Regmap for the clock control registers + */ +struct axxia_clk { + struct clk_hw hw; + struct regmap *regmap; +}; +#define to_axxia_clk(_hw) container_of(_hw, struct axxia_clk, hw) + +/** + * struct axxia_pllclk - Axxia PLL generated clock. + * @aclk: Common struct + * @reg: Offset into regmap for PLL control register + */ +struct axxia_pllclk { + struct axxia_clk aclk; + u32 reg; +}; +#define to_axxia_pllclk(_aclk) container_of(_aclk, struct axxia_pllclk, aclk) + +/** + * axxia_pllclk_recalc - Calculate the PLL generated clock rate given the + * parent clock rate. + */ +static unsigned long +axxia_pllclk_recalc(struct clk_hw *hw, unsigned long parent_rate) +{ + struct axxia_clk *aclk = to_axxia_clk(hw); + struct axxia_pllclk *pll = to_axxia_pllclk(aclk); + unsigned long rate, fbdiv, refdiv, postdiv; + u32 control; + + regmap_read(aclk->regmap, pll->reg, &control); + postdiv = ((control >> 0) & 0xf) + 1; + fbdiv = ((control >> 4) & 0xfff) + 3; + refdiv = ((control >> 16) & 0x1f) + 1; + rate = (parent_rate / (refdiv * postdiv)) * fbdiv; + + return rate; +} + +static const struct clk_ops axxia_pllclk_ops = { + .recalc_rate = axxia_pllclk_recalc, +}; + +/** + * struct axxia_divclk - Axxia clock divider + * @aclk: Common struct + * @reg: Offset into regmap for PLL control register + * @shift: Bit position for divider value + * @width: Number of bits in divider value + */ +struct axxia_divclk { + struct axxia_clk aclk; + u32 reg; + u32 shift; + u32 width; +}; +#define to_axxia_divclk(_aclk) container_of(_aclk, struct axxia_divclk, aclk) + +/** + * axxia_divclk_recalc_rate - Calculate clock divider output rage + */ +static unsigned long +axxia_divclk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct axxia_clk *aclk = to_axxia_clk(hw); + struct axxia_divclk *divclk = to_axxia_divclk(aclk); + u32 ctrl, div; + + regmap_read(aclk->regmap, divclk->reg, &ctrl); + div = 1 + ((ctrl >> divclk->shift) & ((1 << divclk->width)-1)); + + return parent_rate / div; +} + +static const struct clk_ops axxia_divclk_ops = { + .recalc_rate = axxia_divclk_recalc_rate, +}; + +/** + * struct axxia_clkmux - Axxia clock mux + * @aclk: Common struct + * @reg: Offset into regmap for PLL control register + * @shift: Bit position for selection value + * @width: Number of bits in selection value + */ +struct axxia_clkmux { + struct axxia_clk aclk; + u32 reg; + u32 shift; + u32 width; +}; +#define to_axxia_clkmux(_aclk) container_of(_aclk, struct axxia_clkmux, aclk) + +/** + * axxia_clkmux_get_parent - Return the index of selected parent clock + */ +static u8 axxia_clkmux_get_parent(struct clk_hw *hw) +{ + struct axxia_clk *aclk = to_axxia_clk(hw); + struct axxia_clkmux *mux = to_axxia_clkmux(aclk); + u32 ctrl, parent; + + regmap_read(aclk->regmap, mux->reg, &ctrl); + parent = (ctrl >> mux->shift) & ((1 << mux->width) - 1); + + return (u8) parent; +} + +static const struct clk_ops axxia_clkmux_ops = { + .get_parent = axxia_clkmux_get_parent, +}; + + +/* + * PLLs + */ + +static struct axxia_pllclk clk_fab_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_fab_pll", + .parent_names = (const char *[]){ + "clk_ref0" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x01800, +}; + +static struct axxia_pllclk clk_cpu_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu_pll", + .parent_names = (const char *[]){ + "clk_ref0" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x02000, +}; + +static struct axxia_pllclk clk_sys_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sys_pll", + .parent_names = (const char *[]){ + "clk_ref0" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x02800, +}; + +static struct axxia_pllclk clk_sm0_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sm0_pll", + .parent_names = (const char *[]){ + "clk_ref2" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x03000, +}; + +static struct axxia_pllclk clk_sm1_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sm1_pll", + .parent_names = (const char *[]){ + "clk_ref1" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x03800, +}; + +/* + * Clock dividers + */ + +static struct axxia_divclk clk_cpu0_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu0_div", + .parent_names = (const char *[]){ + "clk_cpu_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x10008, + .shift = 0, + .width = 4, +}; + +static struct axxia_divclk clk_cpu1_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu1_div", + .parent_names = (const char *[]){ + "clk_cpu_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x10008, + .shift = 4, + .width = 4, +}; + +static struct axxia_divclk clk_cpu2_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu2_div", + .parent_names = (const char *[]){ + "clk_cpu_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x10008, + .shift = 8, + .width = 4, +}; + +static struct axxia_divclk clk_cpu3_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu3_div", + .parent_names = (const char *[]){ + "clk_cpu_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x10008, + .shift = 12, + .width = 4, +}; + +static struct axxia_divclk clk_nrcp_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_nrcp_div", + .parent_names = (const char *[]){ + "clk_sys_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 0, + .width = 4, +}; + +static struct axxia_divclk clk_sys_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sys_div", + .parent_names = (const char *[]){ + "clk_sys_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 4, + .width = 4, +}; + +static struct axxia_divclk clk_fab_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_fab_div", + .parent_names = (const char *[]){ + "clk_fab_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 8, + .width = 4, +}; + +static struct axxia_divclk clk_per_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_per_div", + .parent_names = (const char *[]){ + "clk_sm1_pll" + }, + .num_parents = 1, + .flags = CLK_IS_BASIC, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 12, + .width = 4, +}; + +static struct axxia_divclk clk_mmc_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_mmc_div", + .parent_names = (const char *[]){ + "clk_sm1_pll" + }, + .num_parents = 1, + .flags = CLK_IS_BASIC, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 16, + .width = 4, +}; + +/* + * Clock MUXes + */ + +static struct axxia_clkmux clk_cpu0_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu0", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_cpu_pll", + "clk_cpu0_div", + "clk_cpu0_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10000, + .shift = 0, + .width = 2, +}; + +static struct axxia_clkmux clk_cpu1_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu1", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_cpu_pll", + "clk_cpu1_div", + "clk_cpu1_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10000, + .shift = 2, + .width = 2, +}; + +static struct axxia_clkmux clk_cpu2_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu2", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_cpu_pll", + "clk_cpu2_div", + "clk_cpu2_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10000, + .shift = 4, + .width = 2, +}; + +static struct axxia_clkmux clk_cpu3_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu3", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_cpu_pll", + "clk_cpu3_div", + "clk_cpu3_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10000, + .shift = 6, + .width = 2, +}; + +static struct axxia_clkmux clk_nrcp_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_nrcp", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_sys_pll", + "clk_nrcp_div", + "clk_nrcp_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 0, + .width = 2, +}; + +static struct axxia_clkmux clk_sys_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sys", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_sys_pll", + "clk_sys_div", + "clk_sys_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 2, + .width = 2, +}; + +static struct axxia_clkmux clk_fab_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_fab", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_fab_pll", + "clk_fab_div", + "clk_fab_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 4, + .width = 2, +}; + +static struct axxia_clkmux clk_per_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_per", + .parent_names = (const char *[]){ + "clk_ref1", + "clk_per_div" + }, + .num_parents = 2, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 6, + .width = 1, +}; + +static struct axxia_clkmux clk_mmc_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_mmc", + .parent_names = (const char *[]){ + "clk_ref1", + "clk_mmc_div" + }, + .num_parents = 2, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 9, + .width = 1, +}; + +/* Table of all supported clocks indexed by the clock identifiers from the + * device tree binding + */ +static struct axxia_clk *axmclk_clocks[] = { + [AXXIA_CLK_FAB_PLL] = &clk_fab_pll.aclk, + [AXXIA_CLK_CPU_PLL] = &clk_cpu_pll.aclk, + [AXXIA_CLK_SYS_PLL] = &clk_sys_pll.aclk, + [AXXIA_CLK_SM0_PLL] = &clk_sm0_pll.aclk, + [AXXIA_CLK_SM1_PLL] = &clk_sm1_pll.aclk, + [AXXIA_CLK_FAB_DIV] = &clk_fab_div.aclk, + [AXXIA_CLK_SYS_DIV] = &clk_sys_div.aclk, + [AXXIA_CLK_NRCP_DIV] = &clk_nrcp_div.aclk, + [AXXIA_CLK_CPU0_DIV] = &clk_cpu0_div.aclk, + [AXXIA_CLK_CPU1_DIV] = &clk_cpu1_div.aclk, + [AXXIA_CLK_CPU2_DIV] = &clk_cpu2_div.aclk, + [AXXIA_CLK_CPU3_DIV] = &clk_cpu3_div.aclk, + [AXXIA_CLK_PER_DIV] = &clk_per_div.aclk, + [AXXIA_CLK_MMC_DIV] = &clk_mmc_div.aclk, + [AXXIA_CLK_FAB] = &clk_fab_mux.aclk, + [AXXIA_CLK_SYS] = &clk_sys_mux.aclk, + [AXXIA_CLK_NRCP] = &clk_nrcp_mux.aclk, + [AXXIA_CLK_CPU0] = &clk_cpu0_mux.aclk, + [AXXIA_CLK_CPU1] = &clk_cpu1_mux.aclk, + [AXXIA_CLK_CPU2] = &clk_cpu2_mux.aclk, + [AXXIA_CLK_CPU3] = &clk_cpu3_mux.aclk, + [AXXIA_CLK_PER] = &clk_per_mux.aclk, + [AXXIA_CLK_MMC] = &clk_mmc_mux.aclk, +}; + +static const struct regmap_config axmclk_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x1fffc, + .fast_io = true, +}; + +static const struct of_device_id axmclk_match_table[] = { + { .compatible = "lsi,axm5516-clks" }, + { } +}; +MODULE_DEVICE_TABLE(of, axmclk_match_table); + +struct axmclk_priv { + struct clk_onecell_data onecell; + struct clk *clks[]; +}; + +static int axmclk_probe(struct platform_device *pdev) +{ + void __iomem *base; + struct resource *res; + int i, ret; + struct device *dev = &pdev->dev; + struct clk *clk; + struct regmap *regmap; + size_t num_clks; + struct axmclk_priv *priv; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &axmclk_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + num_clks = ARRAY_SIZE(axmclk_clocks); + pr_info("axmclk: supporting %u clocks\n", num_clks); + priv = devm_kzalloc(dev, sizeof(*priv) + sizeof(*priv->clks) * num_clks, + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->onecell.clks = priv->clks; + priv->onecell.clk_num = num_clks; + + /* Update each entry with the allocated regmap and register the clock + * with the common clock framework + */ + for (i = 0; i < num_clks; i++) { + axmclk_clocks[i]->regmap = regmap; + clk = devm_clk_register(dev, &axmclk_clocks[i]->hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + priv->clks[i] = clk; + } + + ret = of_clk_add_provider(dev->of_node, + of_clk_src_onecell_get, &priv->onecell); + + return ret; +} + +static int axmclk_remove(struct platform_device *pdev) +{ + of_clk_del_provider(pdev->dev.of_node); + return 0; +} + +static struct platform_driver axmclk_driver = { + .probe = axmclk_probe, + .remove = axmclk_remove, + .driver = { + .name = "clk-axm5516", + .owner = THIS_MODULE, + .of_match_table = axmclk_match_table, + }, +}; + +static int __init axmclk_init(void) +{ + return platform_driver_register(&axmclk_driver); +} +core_initcall(axmclk_init); + +static void __exit axmclk_exit(void) +{ + platform_driver_unregister(&axmclk_driver); +} +module_exit(axmclk_exit); + +MODULE_DESCRIPTION("AXM5516 clock driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:clk-axm5516"); diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 3fbee4540228..47eabfab3706 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -43,6 +43,17 @@ static unsigned int _get_table_maxdiv(const struct clk_div_table *table) return maxdiv; } +static unsigned int _get_table_mindiv(const struct clk_div_table *table) +{ + unsigned int mindiv = UINT_MAX; + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->div < mindiv) + mindiv = clkt->div; + return mindiv; +} + static unsigned int _get_maxdiv(struct clk_divider *divider) { if (divider->flags & CLK_DIVIDER_ONE_BASED) @@ -162,6 +173,24 @@ static int _round_up_table(const struct clk_div_table *table, int div) return up; } +static int _round_down_table(const struct clk_div_table *table, int div) +{ + const struct clk_div_table *clkt; + int down = _get_table_mindiv(table); + + for (clkt = table; clkt->div; clkt++) { + if (clkt->div == div) + return clkt->div; + else if (clkt->div > div) + continue; + + if ((div - clkt->div) < (div - down)) + down = clkt->div; + } + + return down; +} + static int _div_round_up(struct clk_divider *divider, unsigned long parent_rate, unsigned long rate) { @@ -175,6 +204,54 @@ static int _div_round_up(struct clk_divider *divider, return div; } +static int _div_round_closest(struct clk_divider *divider, + unsigned long parent_rate, unsigned long rate) +{ + int up, down, div; + + up = down = div = DIV_ROUND_CLOSEST(parent_rate, rate); + + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) { + up = __roundup_pow_of_two(div); + down = __rounddown_pow_of_two(div); + } else if (divider->table) { + up = _round_up_table(divider->table, div); + down = _round_down_table(divider->table, div); + } + + return (up - div) <= (div - down) ? up : down; +} + +static int _div_round(struct clk_divider *divider, unsigned long parent_rate, + unsigned long rate) +{ + if (divider->flags & CLK_DIVIDER_ROUND_CLOSEST) + return _div_round_closest(divider, parent_rate, rate); + + return _div_round_up(divider, parent_rate, rate); +} + +static bool _is_best_div(struct clk_divider *divider, + int rate, int now, int best) +{ + if (divider->flags & CLK_DIVIDER_ROUND_CLOSEST) + return abs(rate - now) < abs(rate - best); + + return now <= rate && now > best; +} + +static int _next_div(struct clk_divider *divider, int div) +{ + div++; + + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return __roundup_pow_of_two(div); + if (divider->table) + return _round_up_table(divider->table, div); + + return div; +} + static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate) { @@ -190,7 +267,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) { parent_rate = *best_parent_rate; - bestdiv = _div_round_up(divider, parent_rate, rate); + bestdiv = _div_round(divider, parent_rate, rate); bestdiv = bestdiv == 0 ? 1 : bestdiv; bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv; return bestdiv; @@ -202,7 +279,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, */ maxdiv = min(ULONG_MAX / rate, maxdiv); - for (i = 1; i <= maxdiv; i++) { + for (i = 1; i <= maxdiv; i = _next_div(divider, i)) { if (!_is_valid_div(divider, i)) continue; if (rate * i == parent_rate_saved) { @@ -217,7 +294,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), MULT_ROUND_UP(rate, i)); now = DIV_ROUND_UP(parent_rate, i); - if (now <= rate && now > best) { + if (_is_best_div(divider, rate, now, best)) { bestdiv = i; best = now; *best_parent_rate = parent_rate; @@ -284,6 +361,11 @@ const struct clk_ops clk_divider_ops = { }; EXPORT_SYMBOL_GPL(clk_divider_ops); +const struct clk_ops clk_divider_ro_ops = { + .recalc_rate = clk_divider_recalc_rate, +}; +EXPORT_SYMBOL_GPL(clk_divider_ro_ops); + static struct clk *_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, @@ -309,7 +391,10 @@ static struct clk *_register_divider(struct device *dev, const char *name, } init.name = name; - init.ops = &clk_divider_ops; + if (clk_divider_flags & CLK_DIVIDER_READ_ONLY) + init.ops = &clk_divider_ro_ops; + else + init.ops = &clk_divider_ops; init.flags = flags | CLK_IS_BASIC; init.parent_names = (parent_name ? &parent_name: NULL); init.num_parents = (parent_name ? 1 : 0); diff --git a/drivers/clk/clk-si570.c b/drivers/clk/clk-si570.c index 4bbbe32585ec..fc167b3f8919 100644 --- a/drivers/clk/clk-si570.c +++ b/drivers/clk/clk-si570.c @@ -526,6 +526,6 @@ static struct i2c_driver si570_driver = { module_i2c_driver(si570_driver); MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); -MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com"); +MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>"); MODULE_DESCRIPTION("Si570 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 7cf2c093cc54..2df2b26297ce 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -106,12 +106,11 @@ static void clk_summary_show_one(struct seq_file *s, struct clk *c, int level) if (!c) return; - seq_printf(s, "%*s%-*s %-11d %-12d %-10lu %-11lu", + seq_printf(s, "%*s%-*s %11d %12d %11lu %10lu\n", level * 3 + 1, "", 30 - level * 3, c->name, c->enable_count, c->prepare_count, clk_get_rate(c), clk_get_accuracy(c)); - seq_printf(s, "\n"); } static void clk_summary_show_subtree(struct seq_file *s, struct clk *c, @@ -132,8 +131,8 @@ static int clk_summary_show(struct seq_file *s, void *data) { struct clk *c; - seq_printf(s, " clock enable_cnt prepare_cnt rate accuracy\n"); - seq_printf(s, "---------------------------------------------------------------------------------\n"); + seq_puts(s, " clock enable_cnt prepare_cnt rate accuracy\n"); + seq_puts(s, "--------------------------------------------------------------------------------\n"); clk_prepare_lock(); @@ -822,6 +821,9 @@ void __clk_unprepare(struct clk *clk) */ void clk_unprepare(struct clk *clk) { + if (IS_ERR_OR_NULL(clk)) + return; + clk_prepare_lock(); __clk_unprepare(clk); clk_prepare_unlock(); @@ -883,9 +885,6 @@ static void __clk_disable(struct clk *clk) if (!clk) return; - if (WARN_ON(IS_ERR(clk))) - return; - if (WARN_ON(clk->enable_count == 0)) return; @@ -914,6 +913,9 @@ void clk_disable(struct clk *clk) { unsigned long flags; + if (IS_ERR_OR_NULL(clk)) + return; + flags = clk_enable_lock(); __clk_disable(clk); clk_enable_unlock(flags); @@ -1115,6 +1117,13 @@ long clk_get_accuracy(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_get_accuracy); +static unsigned long clk_recalc(struct clk *clk, unsigned long parent_rate) +{ + if (clk->ops->recalc_rate) + return clk->ops->recalc_rate(clk->hw, parent_rate); + return parent_rate; +} + /** * __clk_recalc_rates * @clk: first clk in the subtree @@ -1140,10 +1149,7 @@ static void __clk_recalc_rates(struct clk *clk, unsigned long msg) if (clk->parent) parent_rate = clk->parent->rate; - if (clk->ops->recalc_rate) - clk->rate = clk->ops->recalc_rate(clk->hw, parent_rate); - else - clk->rate = parent_rate; + clk->rate = clk_recalc(clk, parent_rate); /* * ignore NOTIFY_STOP and NOTIFY_BAD return values for POST_RATE_CHANGE @@ -1334,10 +1340,7 @@ static int __clk_speculate_rates(struct clk *clk, unsigned long parent_rate) unsigned long new_rate; int ret = NOTIFY_DONE; - if (clk->ops->recalc_rate) - new_rate = clk->ops->recalc_rate(clk->hw, parent_rate); - else - new_rate = parent_rate; + new_rate = clk_recalc(clk, parent_rate); /* abort rate change if a driver returns NOTIFY_BAD or NOTIFY_STOP */ if (clk->notifier_count) @@ -1373,10 +1376,7 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate, new_parent->new_child = clk; hlist_for_each_entry(child, &clk->children, child_node) { - if (child->ops->recalc_rate) - child->new_rate = child->ops->recalc_rate(child->hw, new_rate); - else - child->new_rate = new_rate; + child->new_rate = clk_recalc(child, new_rate); clk_calc_subtree(child, child->new_rate, NULL, 0); } } @@ -1524,10 +1524,7 @@ static void clk_change_rate(struct clk *clk) if (!skip_set_rate && clk->ops->set_rate) clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate); - if (clk->ops->recalc_rate) - clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate); - else - clk->rate = best_parent_rate; + clk->rate = clk_recalc(clk, best_parent_rate); if (clk->notifier_count && old_rate != clk->rate) __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate); @@ -1716,9 +1713,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent) if (!clk) return 0; - if (!clk->ops) - return -EINVAL; - /* verify ops for for multi-parent clks */ if ((clk->num_parents > 1) && (!clk->ops->set_parent)) return -ENOSYS; diff --git a/drivers/clk/clk.h b/drivers/clk/clk.h index 795cc9f0dac0..c798138f023f 100644 --- a/drivers/clk/clk.h +++ b/drivers/clk/clk.h @@ -10,6 +10,7 @@ */ #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) +struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec); struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec); void of_clk_lock(void); void of_clk_unlock(void); diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index a360b2eca5cb..f890b901c6bc 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -27,6 +27,32 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) + +/** + * of_clk_get_by_clkspec() - Lookup a clock form a clock provider + * @clkspec: pointer to a clock specifier data structure + * + * This function looks up a struct clk from the registered list of clock + * providers, an input is a clock specifier data structure as returned + * from the of_parse_phandle_with_args() function call. + */ +struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec) +{ + struct clk *clk; + + if (!clkspec) + return ERR_PTR(-EINVAL); + + of_clk_lock(); + clk = __of_clk_get_from_provider(clkspec); + + if (!IS_ERR(clk) && !__clk_get(clk)) + clk = ERR_PTR(-ENOENT); + + of_clk_unlock(); + return clk; +} + struct clk *of_clk_get(struct device_node *np, int index) { struct of_phandle_args clkspec; @@ -41,13 +67,7 @@ struct clk *of_clk_get(struct device_node *np, int index) if (rc) return ERR_PTR(rc); - of_clk_lock(); - clk = __of_clk_get_from_provider(&clkspec); - - if (!IS_ERR(clk) && !__clk_get(clk)) - clk = ERR_PTR(-ENOENT); - - of_clk_unlock(); + clk = of_clk_get_by_clkspec(&clkspec); of_node_put(clkspec.np); return clk; } diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile index 40b33c6a8257..038c02f4d0e7 100644 --- a/drivers/clk/hisilicon/Makefile +++ b/drivers/clk/hisilicon/Makefile @@ -6,3 +6,4 @@ obj-y += clk.o clkgate-separated.o obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o +obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o diff --git a/drivers/clk/hisilicon/clk-hix5hd2.c b/drivers/clk/hisilicon/clk-hix5hd2.c new file mode 100644 index 000000000000..e5fcfb4e32ef --- /dev/null +++ b/drivers/clk/hisilicon/clk-hix5hd2.c @@ -0,0 +1,101 @@ +/* + * Copyright (c) 2014 Linaro Ltd. + * Copyright (c) 2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/of_address.h> +#include <dt-bindings/clock/hix5hd2-clock.h> +#include "clk.h" + +static struct hisi_fixed_rate_clock hix5hd2_fixed_rate_clks[] __initdata = { + { HIX5HD2_FIXED_1200M, "1200m", NULL, CLK_IS_ROOT, 1200000000, }, + { HIX5HD2_FIXED_400M, "400m", NULL, CLK_IS_ROOT, 400000000, }, + { HIX5HD2_FIXED_48M, "48m", NULL, CLK_IS_ROOT, 48000000, }, + { HIX5HD2_FIXED_24M, "24m", NULL, CLK_IS_ROOT, 24000000, }, + { HIX5HD2_FIXED_600M, "600m", NULL, CLK_IS_ROOT, 600000000, }, + { HIX5HD2_FIXED_300M, "300m", NULL, CLK_IS_ROOT, 300000000, }, + { HIX5HD2_FIXED_75M, "75m", NULL, CLK_IS_ROOT, 75000000, }, + { HIX5HD2_FIXED_200M, "200m", NULL, CLK_IS_ROOT, 200000000, }, + { HIX5HD2_FIXED_100M, "100m", NULL, CLK_IS_ROOT, 100000000, }, + { HIX5HD2_FIXED_40M, "40m", NULL, CLK_IS_ROOT, 40000000, }, + { HIX5HD2_FIXED_150M, "150m", NULL, CLK_IS_ROOT, 150000000, }, + { HIX5HD2_FIXED_1728M, "1728m", NULL, CLK_IS_ROOT, 1728000000, }, + { HIX5HD2_FIXED_28P8M, "28p8m", NULL, CLK_IS_ROOT, 28000000, }, + { HIX5HD2_FIXED_432M, "432m", NULL, CLK_IS_ROOT, 432000000, }, + { HIX5HD2_FIXED_345P6M, "345p6m", NULL, CLK_IS_ROOT, 345000000, }, + { HIX5HD2_FIXED_288M, "288m", NULL, CLK_IS_ROOT, 288000000, }, + { HIX5HD2_FIXED_60M, "60m", NULL, CLK_IS_ROOT, 60000000, }, + { HIX5HD2_FIXED_750M, "750m", NULL, CLK_IS_ROOT, 750000000, }, + { HIX5HD2_FIXED_500M, "500m", NULL, CLK_IS_ROOT, 500000000, }, + { HIX5HD2_FIXED_54M, "54m", NULL, CLK_IS_ROOT, 54000000, }, + { HIX5HD2_FIXED_27M, "27m", NULL, CLK_IS_ROOT, 27000000, }, + { HIX5HD2_FIXED_1500M, "1500m", NULL, CLK_IS_ROOT, 1500000000, }, + { HIX5HD2_FIXED_375M, "375m", NULL, CLK_IS_ROOT, 375000000, }, + { HIX5HD2_FIXED_187M, "187m", NULL, CLK_IS_ROOT, 187000000, }, + { HIX5HD2_FIXED_250M, "250m", NULL, CLK_IS_ROOT, 250000000, }, + { HIX5HD2_FIXED_125M, "125m", NULL, CLK_IS_ROOT, 125000000, }, + { HIX5HD2_FIXED_2P02M, "2m", NULL, CLK_IS_ROOT, 2000000, }, + { HIX5HD2_FIXED_50M, "50m", NULL, CLK_IS_ROOT, 50000000, }, + { HIX5HD2_FIXED_25M, "25m", NULL, CLK_IS_ROOT, 25000000, }, + { HIX5HD2_FIXED_83M, "83m", NULL, CLK_IS_ROOT, 83333333, }, +}; + +static const char *sfc_mux_p[] __initconst = { + "24m", "150m", "200m", "100m", "75m", }; +static u32 sfc_mux_table[] = {0, 4, 5, 6, 7}; + +static const char *sdio1_mux_p[] __initconst = { + "75m", "100m", "50m", "15m", }; +static u32 sdio1_mux_table[] = {0, 1, 2, 3}; + +static const char *fephy_mux_p[] __initconst = { "25m", "125m"}; +static u32 fephy_mux_table[] = {0, 1}; + + +static struct hisi_mux_clock hix5hd2_mux_clks[] __initdata = { + { HIX5HD2_SFC_MUX, "sfc_mux", sfc_mux_p, ARRAY_SIZE(sfc_mux_p), + CLK_SET_RATE_PARENT, 0x5c, 8, 3, 0, sfc_mux_table, }, + { HIX5HD2_MMC_MUX, "mmc_mux", sdio1_mux_p, ARRAY_SIZE(sdio1_mux_p), + CLK_SET_RATE_PARENT, 0xa0, 8, 2, 0, sdio1_mux_table, }, + { HIX5HD2_FEPHY_MUX, "fephy_mux", + fephy_mux_p, ARRAY_SIZE(fephy_mux_p), + CLK_SET_RATE_PARENT, 0x120, 8, 2, 0, fephy_mux_table, }, +}; + +static struct hisi_gate_clock hix5hd2_gate_clks[] __initdata = { + /*sfc*/ + { HIX5HD2_SFC_CLK, "clk_sfc", "sfc_mux", + CLK_SET_RATE_PARENT, 0x5c, 0, 0, }, + { HIX5HD2_SFC_RST, "rst_sfc", "clk_sfc", + CLK_SET_RATE_PARENT, 0x5c, 4, CLK_GATE_SET_TO_DISABLE, }, + /*sdio1*/ + { HIX5HD2_MMC_BIU_CLK, "clk_mmc_biu", "200m", + CLK_SET_RATE_PARENT, 0xa0, 0, 0, }, + { HIX5HD2_MMC_CIU_CLK, "clk_mmc_ciu", "mmc_mux", + CLK_SET_RATE_PARENT, 0xa0, 1, 0, }, + { HIX5HD2_MMC_CIU_RST, "rst_mmc_ciu", "clk_mmc_ciu", + CLK_SET_RATE_PARENT, 0xa0, 4, CLK_GATE_SET_TO_DISABLE, }, +}; + +static void __init hix5hd2_clk_init(struct device_node *np) +{ + struct hisi_clock_data *clk_data; + + clk_data = hisi_clk_init(np, HIX5HD2_NR_CLKS); + if (!clk_data) + return; + + hisi_clk_register_fixed_rate(hix5hd2_fixed_rate_clks, + ARRAY_SIZE(hix5hd2_fixed_rate_clks), + clk_data); + hisi_clk_register_mux(hix5hd2_mux_clks, ARRAY_SIZE(hix5hd2_mux_clks), + clk_data); + hisi_clk_register_gate(hix5hd2_gate_clks, + ARRAY_SIZE(hix5hd2_gate_clks), clk_data); +} + +CLK_OF_DECLARE(hix5hd2_clk, "hisilicon,hix5hd2-clock", hix5hd2_clk_init); diff --git a/drivers/clk/hisilicon/clk.c b/drivers/clk/hisilicon/clk.c index 276f672e7b1a..a078e84f7b05 100644 --- a/drivers/clk/hisilicon/clk.c +++ b/drivers/clk/hisilicon/clk.c @@ -127,11 +127,14 @@ void __init hisi_clk_register_mux(struct hisi_mux_clock *clks, int i; for (i = 0; i < nums; i++) { - clk = clk_register_mux(NULL, clks[i].name, clks[i].parent_names, - clks[i].num_parents, clks[i].flags, - base + clks[i].offset, clks[i].shift, - clks[i].width, clks[i].mux_flags, - &hisi_clk_lock); + u32 mask = BIT(clks[i].width) - 1; + + clk = clk_register_mux_table(NULL, clks[i].name, + clks[i].parent_names, + clks[i].num_parents, clks[i].flags, + base + clks[i].offset, clks[i].shift, + mask, clks[i].mux_flags, + clks[i].table, &hisi_clk_lock); if (IS_ERR(clk)) { pr_err("%s: failed to register clock %s\n", __func__, clks[i].name); @@ -174,6 +177,34 @@ void __init hisi_clk_register_divider(struct hisi_divider_clock *clks, } } +void __init hisi_clk_register_gate(struct hisi_gate_clock *clks, + int nums, struct hisi_clock_data *data) +{ + struct clk *clk; + void __iomem *base = data->base; + int i; + + for (i = 0; i < nums; i++) { + clk = clk_register_gate(NULL, clks[i].name, + clks[i].parent_name, + clks[i].flags, + base + clks[i].offset, + clks[i].bit_idx, + clks[i].gate_flags, + &hisi_clk_lock); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s\n", + __func__, clks[i].name); + continue; + } + + if (clks[i].alias) + clk_register_clkdev(clk, clks[i].alias, NULL); + + data->clk_data.clks[clks[i].id] = clk; + } +} + void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *clks, int nums, struct hisi_clock_data *data) { diff --git a/drivers/clk/hisilicon/clk.h b/drivers/clk/hisilicon/clk.h index 43fa5da88f02..31083ffc0650 100644 --- a/drivers/clk/hisilicon/clk.h +++ b/drivers/clk/hisilicon/clk.h @@ -62,6 +62,7 @@ struct hisi_mux_clock { u8 shift; u8 width; u8 mux_flags; + u32 *table; const char *alias; }; @@ -103,6 +104,8 @@ void __init hisi_clk_register_mux(struct hisi_mux_clock *, int, struct hisi_clock_data *); void __init hisi_clk_register_divider(struct hisi_divider_clock *, int, struct hisi_clock_data *); +void __init hisi_clk_register_gate(struct hisi_gate_clock *, + int, struct hisi_clock_data *); void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *, int, struct hisi_clock_data *); #endif /* __HISI_CLK_H */ diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig index 693f7be129f1..3b34dba9178d 100644 --- a/drivers/clk/mvebu/Kconfig +++ b/drivers/clk/mvebu/Kconfig @@ -34,3 +34,7 @@ config DOVE_CLK config KIRKWOOD_CLK bool select MVEBU_CLK_COMMON + +config ORION_CLK + bool + select MVEBU_CLK_COMMON diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile index 4c66162fb0b4..a9a56fc01901 100644 --- a/drivers/clk/mvebu/Makefile +++ b/drivers/clk/mvebu/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_ARMADA_38X_CLK) += armada-38x.o obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o obj-$(CONFIG_DOVE_CLK) += dove.o obj-$(CONFIG_KIRKWOOD_CLK) += kirkwood.o +obj-$(CONFIG_ORION_CLK) += orion.o diff --git a/drivers/clk/mvebu/orion.c b/drivers/clk/mvebu/orion.c new file mode 100644 index 000000000000..fd129566c1ce --- /dev/null +++ b/drivers/clk/mvebu/orion.c @@ -0,0 +1,210 @@ +/* + * Marvell Orion SoC clocks + * + * Copyright (C) 2014 Thomas Petazzoni + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +static const struct coreclk_ratio orion_coreclk_ratios[] __initconst = { + { .id = 0, .name = "ddrclk", } +}; + +/* + * Orion 5182 + */ + +#define SAR_MV88F5182_TCLK_FREQ 8 +#define SAR_MV88F5182_TCLK_FREQ_MASK 0x3 + +static u32 __init mv88f5182_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F5182_TCLK_FREQ) & + SAR_MV88F5182_TCLK_FREQ_MASK; + if (opt == 1) + return 150000000; + else if (opt == 2) + return 166666667; + else + return 0; +} + +#define SAR_MV88F5182_CPU_FREQ 4 +#define SAR_MV88F5182_CPU_FREQ_MASK 0xf + +static u32 __init mv88f5182_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) & + SAR_MV88F5182_CPU_FREQ_MASK; + if (opt == 0) + return 333333333; + else if (opt == 1 || opt == 2) + return 400000000; + else if (opt == 3) + return 500000000; + else + return 0; +} + +static void __init mv88f5182_get_clk_ratio(void __iomem *sar, int id, + int *mult, int *div) +{ + u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) & + SAR_MV88F5182_CPU_FREQ_MASK; + if (opt == 0 || opt == 1) { + *mult = 1; + *div = 2; + } else if (opt == 2 || opt == 3) { + *mult = 1; + *div = 3; + } else { + *mult = 0; + *div = 1; + } +} + +static const struct coreclk_soc_desc mv88f5182_coreclks = { + .get_tclk_freq = mv88f5182_get_tclk_freq, + .get_cpu_freq = mv88f5182_get_cpu_freq, + .get_clk_ratio = mv88f5182_get_clk_ratio, + .ratios = orion_coreclk_ratios, + .num_ratios = ARRAY_SIZE(orion_coreclk_ratios), +}; + +static void __init mv88f5182_clk_init(struct device_node *np) +{ + return mvebu_coreclk_setup(np, &mv88f5182_coreclks); +} + +CLK_OF_DECLARE(mv88f5182_clk, "marvell,mv88f5182-core-clock", mv88f5182_clk_init); + +/* + * Orion 5281 + */ + +static u32 __init mv88f5281_get_tclk_freq(void __iomem *sar) +{ + /* On 5281, tclk is always 166 Mhz */ + return 166666667; +} + +#define SAR_MV88F5281_CPU_FREQ 4 +#define SAR_MV88F5281_CPU_FREQ_MASK 0xf + +static u32 __init mv88f5281_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) & + SAR_MV88F5281_CPU_FREQ_MASK; + if (opt == 1 || opt == 2) + return 400000000; + else if (opt == 3) + return 500000000; + else + return 0; +} + +static void __init mv88f5281_get_clk_ratio(void __iomem *sar, int id, + int *mult, int *div) +{ + u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) & + SAR_MV88F5281_CPU_FREQ_MASK; + if (opt == 1) { + *mult = 1; + *div = 2; + } else if (opt == 2 || opt == 3) { + *mult = 1; + *div = 3; + } else { + *mult = 0; + *div = 1; + } +} + +static const struct coreclk_soc_desc mv88f5281_coreclks = { + .get_tclk_freq = mv88f5281_get_tclk_freq, + .get_cpu_freq = mv88f5281_get_cpu_freq, + .get_clk_ratio = mv88f5281_get_clk_ratio, + .ratios = orion_coreclk_ratios, + .num_ratios = ARRAY_SIZE(orion_coreclk_ratios), +}; + +static void __init mv88f5281_clk_init(struct device_node *np) +{ + return mvebu_coreclk_setup(np, &mv88f5281_coreclks); +} + +CLK_OF_DECLARE(mv88f5281_clk, "marvell,mv88f5281-core-clock", mv88f5281_clk_init); + +/* + * Orion 6183 + */ + +#define SAR_MV88F6183_TCLK_FREQ 9 +#define SAR_MV88F6183_TCLK_FREQ_MASK 0x1 + +static u32 __init mv88f6183_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6183_TCLK_FREQ) & + SAR_MV88F6183_TCLK_FREQ_MASK; + if (opt == 0) + return 133333333; + else if (opt == 1) + return 166666667; + else + return 0; +} + +#define SAR_MV88F6183_CPU_FREQ 1 +#define SAR_MV88F6183_CPU_FREQ_MASK 0x3f + +static u32 __init mv88f6183_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) & + SAR_MV88F6183_CPU_FREQ_MASK; + if (opt == 9) + return 333333333; + else if (opt == 17) + return 400000000; + else + return 0; +} + +static void __init mv88f6183_get_clk_ratio(void __iomem *sar, int id, + int *mult, int *div) +{ + u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) & + SAR_MV88F6183_CPU_FREQ_MASK; + if (opt == 9 || opt == 17) { + *mult = 1; + *div = 2; + } else { + *mult = 0; + *div = 1; + } +} + +static const struct coreclk_soc_desc mv88f6183_coreclks = { + .get_tclk_freq = mv88f6183_get_tclk_freq, + .get_cpu_freq = mv88f6183_get_cpu_freq, + .get_clk_ratio = mv88f6183_get_clk_ratio, + .ratios = orion_coreclk_ratios, + .num_ratios = ARRAY_SIZE(orion_coreclk_ratios), +}; + + +static void __init mv88f6183_clk_init(struct device_node *np) +{ + return mvebu_coreclk_setup(np, &mv88f6183_coreclks); +} + +CLK_OF_DECLARE(mv88f6183_clk, "marvell,mv88f6183-core-clock", mv88f6183_clk_init); diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 995bcfa021a4..7f696b7d4422 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -13,10 +13,10 @@ config MSM_GCC_8660 i2c, USB, SD/eMMC, etc. config MSM_GCC_8960 - tristate "MSM8960 Global Clock Controller" + tristate "APQ8064/MSM8960 Global Clock Controller" depends on COMMON_CLK_QCOM help - Support for the global clock controller on msm8960 devices. + Support for the global clock controller on apq8064/msm8960 devices. Say Y if you want to use peripheral devices such as UART, SPI, i2c, USB, SD/eMMC, SATA, PCIe, etc. diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index f60db2ef1aee..689e05bf4f95 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_COMMON_CLK_QCOM) += clk-qcom.o +clk-qcom-y += common.o clk-qcom-y += clk-regmap.o clk-qcom-y += clk-pll.o clk-qcom-y += clk-rcg.o diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c new file mode 100644 index 000000000000..86b45fba5f90 --- /dev/null +++ b/drivers/clk/qcom/common.c @@ -0,0 +1,99 @@ +/* + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/export.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include <linux/clk-provider.h> +#include <linux/reset-controller.h> + +#include "common.h" +#include "clk-regmap.h" +#include "reset.h" + +struct qcom_cc { + struct qcom_reset_controller reset; + struct clk_onecell_data data; + struct clk *clks[]; +}; + +int qcom_cc_probe(struct platform_device *pdev, const struct qcom_cc_desc *desc) +{ + void __iomem *base; + struct resource *res; + int i, ret; + struct device *dev = &pdev->dev; + struct clk *clk; + struct clk_onecell_data *data; + struct clk **clks; + struct regmap *regmap; + struct qcom_reset_controller *reset; + struct qcom_cc *cc; + size_t num_clks = desc->num_clks; + struct clk_regmap **rclks = desc->clks; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, desc->config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, + GFP_KERNEL); + if (!cc) + return -ENOMEM; + + clks = cc->clks; + data = &cc->data; + data->clks = clks; + data->clk_num = num_clks; + + for (i = 0; i < num_clks; i++) { + if (!rclks[i]) + continue; + clk = devm_clk_register_regmap(dev, rclks[i]); + if (IS_ERR(clk)) + return PTR_ERR(clk); + clks[i] = clk; + } + + ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); + if (ret) + return ret; + + reset = &cc->reset; + reset->rcdev.of_node = dev->of_node; + reset->rcdev.ops = &qcom_reset_ops; + reset->rcdev.owner = dev->driver->owner; + reset->rcdev.nr_resets = desc->num_resets; + reset->regmap = regmap; + reset->reset_map = desc->resets; + platform_set_drvdata(pdev, &reset->rcdev); + + ret = reset_controller_register(&reset->rcdev); + if (ret) + of_clk_del_provider(dev->of_node); + + return ret; +} +EXPORT_SYMBOL_GPL(qcom_cc_probe); + +void qcom_cc_remove(struct platform_device *pdev) +{ + of_clk_del_provider(pdev->dev.of_node); + reset_controller_unregister(platform_get_drvdata(pdev)); +} +EXPORT_SYMBOL_GPL(qcom_cc_remove); diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h new file mode 100644 index 000000000000..2c3cfc860348 --- /dev/null +++ b/drivers/clk/qcom/common.h @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_CLK_COMMON_H__ +#define __QCOM_CLK_COMMON_H__ + +struct platform_device; +struct regmap_config; +struct clk_regmap; +struct qcom_reset_map; + +struct qcom_cc_desc { + const struct regmap_config *config; + struct clk_regmap **clks; + size_t num_clks; + const struct qcom_reset_map *resets; + size_t num_resets; +}; + +extern int qcom_cc_probe(struct platform_device *pdev, + const struct qcom_cc_desc *desc); + +extern void qcom_cc_remove(struct platform_device *pdev); + +#endif diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c index bc0b7f1fcfbe..0c4b727ae429 100644 --- a/drivers/clk/qcom/gcc-msm8660.c +++ b/drivers/clk/qcom/gcc-msm8660.c @@ -25,6 +25,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/reset/qcom,gcc-msm8660.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -2701,51 +2702,24 @@ static const struct regmap_config gcc_msm8660_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc gcc_msm8660_desc = { + .config = &gcc_msm8660_regmap_config, + .clks = gcc_msm8660_clks, + .num_clks = ARRAY_SIZE(gcc_msm8660_clks), + .resets = gcc_msm8660_resets, + .num_resets = ARRAY_SIZE(gcc_msm8660_resets), +}; + static const struct of_device_id gcc_msm8660_match_table[] = { { .compatible = "qcom,gcc-msm8660" }, { } }; MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; - static int gcc_msm8660_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; - struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8660_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(gcc_msm8660_clks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; + struct device *dev = &pdev->dev; /* Temporary until RPM clocks supported */ clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000); @@ -2756,39 +2730,12 @@ static int gcc_msm8660_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - for (i = 0; i < num_clks; i++) { - if (!gcc_msm8660_clks[i]) - continue; - clk = devm_clk_register_regmap(dev, gcc_msm8660_clks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); - if (ret) - return ret; - - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8660_resets), - reset->regmap = regmap; - reset->reset_map = gcc_msm8660_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); - - return ret; + return qcom_cc_probe(pdev, &gcc_msm8660_desc); } static int gcc_msm8660_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c index fd446ab2fd98..f4ffd91901f8 100644 --- a/drivers/clk/qcom/gcc-msm8960.c +++ b/drivers/clk/qcom/gcc-msm8960.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013, The Linux Foundation. All rights reserved. + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -25,6 +25,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -2809,7 +2810,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = { [PPSS_PROC_RESET] = { 0x2594, 1 }, [PPSS_RESET] = { 0x2594}, [DMA_BAM_RESET] = { 0x25c0, 7 }, - [SIC_TIC_RESET] = { 0x2600, 7 }, + [SPS_TIC_H_RESET] = { 0x2600, 7 }, [SLIMBUS_H_RESET] = { 0x2620, 7 }, [SFAB_CFPB_M_RESET] = { 0x2680, 7 }, [SFAB_CFPB_S_RESET] = { 0x26c0, 7 }, @@ -2822,7 +2823,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = { [SFAB_SFPB_M_RESET] = { 0x2780, 7 }, [SFAB_SFPB_S_RESET] = { 0x27a0, 7 }, [RPM_PROC_RESET] = { 0x27c0, 7 }, - [PMIC_SSBI2_RESET] = { 0x270c, 12 }, + [PMIC_SSBI2_RESET] = { 0x280c, 12 }, [SDC1_RESET] = { 0x2830 }, [SDC2_RESET] = { 0x2850 }, [SDC3_RESET] = { 0x2870 }, @@ -2867,6 +2868,16 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = { [RIVA_RESET] = { 0x35e0 }, }; +static struct clk_regmap *gcc_apq8064_clks[] = { + [PLL8] = &pll8.clkr, + [PLL8_VOTE] = &pll8_vote, + [GSBI7_UART_SRC] = &gsbi7_uart_src.clkr, + [GSBI7_UART_CLK] = &gsbi7_uart_clk.clkr, + [GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr, + [GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr, + [GSBI7_H_CLK] = &gsbi7_h_clk.clkr, +}; + static const struct regmap_config gcc_msm8960_regmap_config = { .reg_bits = 32, .reg_stride = 4, @@ -2875,51 +2886,38 @@ static const struct regmap_config gcc_msm8960_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc gcc_msm8960_desc = { + .config = &gcc_msm8960_regmap_config, + .clks = gcc_msm8960_clks, + .num_clks = ARRAY_SIZE(gcc_msm8960_clks), + .resets = gcc_msm8960_resets, + .num_resets = ARRAY_SIZE(gcc_msm8960_resets), +}; + +static const struct qcom_cc_desc gcc_apq8064_desc = { + .config = &gcc_msm8960_regmap_config, + .clks = gcc_apq8064_clks, + .num_clks = ARRAY_SIZE(gcc_apq8064_clks), + .resets = gcc_msm8960_resets, + .num_resets = ARRAY_SIZE(gcc_msm8960_resets), +}; + static const struct of_device_id gcc_msm8960_match_table[] = { - { .compatible = "qcom,gcc-msm8960" }, + { .compatible = "qcom,gcc-msm8960", .data = &gcc_msm8960_desc }, + { .compatible = "qcom,gcc-apq8064", .data = &gcc_apq8064_desc }, { } }; MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; - static int gcc_msm8960_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; - struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8960_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(gcc_msm8960_clks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; + struct device *dev = &pdev->dev; + const struct of_device_id *match; + + match = of_match_device(gcc_msm8960_match_table, &pdev->dev); + if (!match) + return -EINVAL; /* Temporary until RPM clocks supported */ clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000); @@ -2930,39 +2928,12 @@ static int gcc_msm8960_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - for (i = 0; i < num_clks; i++) { - if (!gcc_msm8960_clks[i]) - continue; - clk = devm_clk_register_regmap(dev, gcc_msm8960_clks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); - if (ret) - return ret; - - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8960_resets), - reset->regmap = regmap; - reset->reset_map = gcc_msm8960_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); - - return ret; + return qcom_cc_probe(pdev, match->data); } static int gcc_msm8960_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c index 51d457e2b959..0d1edc1e9b31 100644 --- a/drivers/clk/qcom/gcc-msm8974.c +++ b/drivers/clk/qcom/gcc-msm8974.c @@ -25,6 +25,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -2574,51 +2575,24 @@ static const struct regmap_config gcc_msm8974_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc gcc_msm8974_desc = { + .config = &gcc_msm8974_regmap_config, + .clks = gcc_msm8974_clocks, + .num_clks = ARRAY_SIZE(gcc_msm8974_clocks), + .resets = gcc_msm8974_resets, + .num_resets = ARRAY_SIZE(gcc_msm8974_resets), +}; + static const struct of_device_id gcc_msm8974_match_table[] = { { .compatible = "qcom,gcc-msm8974" }, { } }; MODULE_DEVICE_TABLE(of, gcc_msm8974_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; - static int gcc_msm8974_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; - struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8974_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(gcc_msm8974_clocks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; + struct device *dev = &pdev->dev; /* Temporary until RPM clocks supported */ clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000); @@ -2631,39 +2605,12 @@ static int gcc_msm8974_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - for (i = 0; i < num_clks; i++) { - if (!gcc_msm8974_clocks[i]) - continue; - clk = devm_clk_register_regmap(dev, gcc_msm8974_clocks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); - if (ret) - return ret; - - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8974_resets), - reset->regmap = regmap; - reset->reset_map = gcc_msm8974_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); - - return ret; + return qcom_cc_probe(pdev, &gcc_msm8974_desc); } static int gcc_msm8974_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c index f9b59c7e48e9..12f3c0b64fcd 100644 --- a/drivers/clk/qcom/mmcc-msm8960.c +++ b/drivers/clk/qcom/mmcc-msm8960.c @@ -26,6 +26,7 @@ #include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/reset/qcom,mmcc-msm8960.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -2222,85 +2223,28 @@ static const struct regmap_config mmcc_msm8960_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc mmcc_msm8960_desc = { + .config = &mmcc_msm8960_regmap_config, + .clks = mmcc_msm8960_clks, + .num_clks = ARRAY_SIZE(mmcc_msm8960_clks), + .resets = mmcc_msm8960_resets, + .num_resets = ARRAY_SIZE(mmcc_msm8960_resets), +}; + static const struct of_device_id mmcc_msm8960_match_table[] = { { .compatible = "qcom,mmcc-msm8960" }, { } }; MODULE_DEVICE_TABLE(of, mmcc_msm8960_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; - static int mmcc_msm8960_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; - struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; - struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &mmcc_msm8960_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(mmcc_msm8960_clks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; - - for (i = 0; i < num_clks; i++) { - if (!mmcc_msm8960_clks[i]) - continue; - clk = devm_clk_register_regmap(dev, mmcc_msm8960_clks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); - if (ret) - return ret; - - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(mmcc_msm8960_resets), - reset->regmap = regmap; - reset->reset_map = mmcc_msm8960_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); - - return ret; + return qcom_cc_probe(pdev, &mmcc_msm8960_desc); } static int mmcc_msm8960_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c index c95774514b81..60b7c24a5cd6 100644 --- a/drivers/clk/qcom/mmcc-msm8974.c +++ b/drivers/clk/qcom/mmcc-msm8974.c @@ -25,6 +25,7 @@ #include <dt-bindings/clock/qcom,mmcc-msm8974.h> #include <dt-bindings/reset/qcom,mmcc-msm8974.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -2524,88 +2525,39 @@ static const struct regmap_config mmcc_msm8974_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc mmcc_msm8974_desc = { + .config = &mmcc_msm8974_regmap_config, + .clks = mmcc_msm8974_clocks, + .num_clks = ARRAY_SIZE(mmcc_msm8974_clocks), + .resets = mmcc_msm8974_resets, + .num_resets = ARRAY_SIZE(mmcc_msm8974_resets), +}; + static const struct of_device_id mmcc_msm8974_match_table[] = { { .compatible = "qcom,mmcc-msm8974" }, { } }; MODULE_DEVICE_TABLE(of, mmcc_msm8974_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; - static int mmcc_msm8974_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; - struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; + int ret; struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &mmcc_msm8974_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(mmcc_msm8974_clocks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; - - clk_pll_configure_sr_hpm_lp(&mmpll1, regmap, &mmpll1_config, true); - clk_pll_configure_sr_hpm_lp(&mmpll3, regmap, &mmpll3_config, false); - for (i = 0; i < num_clks; i++) { - if (!mmcc_msm8974_clocks[i]) - continue; - clk = devm_clk_register_regmap(dev, mmcc_msm8974_clocks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); + ret = qcom_cc_probe(pdev, &mmcc_msm8974_desc); if (ret) return ret; - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(mmcc_msm8974_resets), - reset->regmap = regmap; - reset->reset_map = mmcc_msm8974_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); + regmap = dev_get_regmap(&pdev->dev, NULL); + clk_pll_configure_sr_hpm_lp(&mmpll1, regmap, &mmpll1_config, true); + clk_pll_configure_sr_hpm_lp(&mmpll3, regmap, &mmpll3_config, false); - return ret; + return 0; } static int mmcc_msm8974_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile index 5404cb931ebf..e0029237827a 100644 --- a/drivers/clk/shmobile/Makefile +++ b/drivers/clk/shmobile/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_ARCH_EMEV2) += clk-emev2.o obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o +obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o +obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c index 1f6324e29a80..2d2fe773ac81 100644 --- a/drivers/clk/shmobile/clk-mstp.c +++ b/drivers/clk/shmobile/clk-mstp.c @@ -112,7 +112,7 @@ static int cpg_mstp_clock_is_enabled(struct clk_hw *hw) else value = clk_readl(group->smstpcr); - return !!(value & BIT(clock->bit_index)); + return !(value & BIT(clock->bit_index)); } static const struct clk_ops cpg_mstp_clock_ops = { diff --git a/drivers/clk/shmobile/clk-r8a7740.c b/drivers/clk/shmobile/clk-r8a7740.c new file mode 100644 index 000000000000..1e2eaae21e01 --- /dev/null +++ b/drivers/clk/shmobile/clk-r8a7740.c @@ -0,0 +1,199 @@ +/* + * r8a7740 Core CPG Clocks + * + * Copyright (C) 2014 Ulrich Hecht + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/shmobile.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> + +struct r8a7740_cpg { + struct clk_onecell_data data; + spinlock_t lock; + void __iomem *reg; +}; + +#define CPG_FRQCRA 0x00 +#define CPG_FRQCRB 0x04 +#define CPG_PLLC2CR 0x2c +#define CPG_USBCKCR 0x8c +#define CPG_FRQCRC 0xe0 + +#define CLK_ENABLE_ON_INIT BIT(0) + +struct div4_clk { + const char *name; + unsigned int reg; + unsigned int shift; + int flags; +}; + +static struct div4_clk div4_clks[] = { + { "i", CPG_FRQCRA, 20, CLK_ENABLE_ON_INIT }, + { "zg", CPG_FRQCRA, 16, CLK_ENABLE_ON_INIT }, + { "b", CPG_FRQCRA, 8, CLK_ENABLE_ON_INIT }, + { "m1", CPG_FRQCRA, 4, CLK_ENABLE_ON_INIT }, + { "hp", CPG_FRQCRB, 4, 0 }, + { "hpp", CPG_FRQCRC, 20, 0 }, + { "usbp", CPG_FRQCRC, 16, 0 }, + { "s", CPG_FRQCRC, 12, 0 }, + { "zb", CPG_FRQCRC, 8, 0 }, + { "m3", CPG_FRQCRC, 4, 0 }, + { "cp", CPG_FRQCRC, 0, 0 }, + { NULL, 0, 0, 0 }, +}; + +static const struct clk_div_table div4_div_table[] = { + { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 }, { 5, 12 }, + { 6, 16 }, { 7, 18 }, { 8, 24 }, { 9, 32 }, { 10, 36 }, { 11, 48 }, + { 13, 72 }, { 14, 96 }, { 0, 0 } +}; + +static u32 cpg_mode __initdata; + +static struct clk * __init +r8a7740_cpg_register_clock(struct device_node *np, struct r8a7740_cpg *cpg, + const char *name) +{ + const struct clk_div_table *table = NULL; + const char *parent_name; + unsigned int shift, reg; + unsigned int mult = 1; + unsigned int div = 1; + + if (!strcmp(name, "r")) { + switch (cpg_mode & (BIT(2) | BIT(1))) { + case BIT(1) | BIT(2): + /* extal1 */ + parent_name = of_clk_get_parent_name(np, 0); + div = 2048; + break; + case BIT(2): + /* extal1 */ + parent_name = of_clk_get_parent_name(np, 0); + div = 1024; + break; + default: + /* extalr */ + parent_name = of_clk_get_parent_name(np, 2); + break; + } + } else if (!strcmp(name, "system")) { + parent_name = of_clk_get_parent_name(np, 0); + if (cpg_mode & BIT(1)) + div = 2; + } else if (!strcmp(name, "pllc0")) { + /* PLLC0/1 are configurable multiplier clocks. Register them as + * fixed factor clocks for now as there's no generic multiplier + * clock implementation and we currently have no need to change + * the multiplier value. + */ + u32 value = clk_readl(cpg->reg + CPG_FRQCRC); + parent_name = "system"; + mult = ((value >> 24) & 0x7f) + 1; + } else if (!strcmp(name, "pllc1")) { + u32 value = clk_readl(cpg->reg + CPG_FRQCRA); + parent_name = "system"; + mult = ((value >> 24) & 0x7f) + 1; + div = 2; + } else if (!strcmp(name, "pllc2")) { + u32 value = clk_readl(cpg->reg + CPG_PLLC2CR); + parent_name = "system"; + mult = ((value >> 24) & 0x3f) + 1; + } else if (!strcmp(name, "usb24s")) { + u32 value = clk_readl(cpg->reg + CPG_USBCKCR); + if (value & BIT(7)) + /* extal2 */ + parent_name = of_clk_get_parent_name(np, 1); + else + parent_name = "system"; + if (!(value & BIT(6))) + div = 2; + } else { + struct div4_clk *c; + for (c = div4_clks; c->name; c++) { + if (!strcmp(name, c->name)) { + parent_name = "pllc1"; + table = div4_div_table; + reg = c->reg; + shift = c->shift; + break; + } + } + if (!c->name) + return ERR_PTR(-EINVAL); + } + + if (!table) { + return clk_register_fixed_factor(NULL, name, parent_name, 0, + mult, div); + } else { + return clk_register_divider_table(NULL, name, parent_name, 0, + cpg->reg + reg, shift, 4, 0, + table, &cpg->lock); + } +} + +static void __init r8a7740_cpg_clocks_init(struct device_node *np) +{ + struct r8a7740_cpg *cpg; + struct clk **clks; + unsigned int i; + int num_clks; + + if (of_property_read_u32(np, "renesas,mode", &cpg_mode)) + pr_warn("%s: missing renesas,mode property\n", __func__); + + num_clks = of_property_count_strings(np, "clock-output-names"); + if (num_clks < 0) { + pr_err("%s: failed to count clocks\n", __func__); + return; + } + + cpg = kzalloc(sizeof(*cpg), GFP_KERNEL); + clks = kzalloc(num_clks * sizeof(*clks), GFP_KERNEL); + if (cpg == NULL || clks == NULL) { + /* We're leaking memory on purpose, there's no point in cleaning + * up as the system won't boot anyway. + */ + return; + } + + spin_lock_init(&cpg->lock); + + cpg->data.clks = clks; + cpg->data.clk_num = num_clks; + + cpg->reg = of_iomap(np, 0); + if (WARN_ON(cpg->reg == NULL)) + return; + + for (i = 0; i < num_clks; ++i) { + const char *name; + struct clk *clk; + + of_property_read_string_index(np, "clock-output-names", i, + &name); + + clk = r8a7740_cpg_register_clock(np, cpg, name); + if (IS_ERR(clk)) + pr_err("%s: failed to register %s %s clock (%ld)\n", + __func__, np->name, name, PTR_ERR(clk)); + else + cpg->data.clks[i] = clk; + } + + of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data); +} +CLK_OF_DECLARE(r8a7740_cpg_clks, "renesas,r8a7740-cpg-clocks", + r8a7740_cpg_clocks_init); diff --git a/drivers/clk/shmobile/clk-r8a7779.c b/drivers/clk/shmobile/clk-r8a7779.c new file mode 100644 index 000000000000..652ecacb6daf --- /dev/null +++ b/drivers/clk/shmobile/clk-r8a7779.c @@ -0,0 +1,180 @@ +/* + * r8a7779 Core CPG Clocks + * + * Copyright (C) 2013, 2014 Horms Solutions Ltd. + * + * Contact: Simon Horman <horms@verge.net.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/shmobile.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> + +#include <dt-bindings/clock/r8a7779-clock.h> + +#define CPG_NUM_CLOCKS (R8A7779_CLK_OUT + 1) + +struct r8a7779_cpg { + struct clk_onecell_data data; + spinlock_t lock; + void __iomem *reg; +}; + +/* ----------------------------------------------------------------------------- + * CPG Clock Data + */ + +/* + * MD1 = 1 MD1 = 0 + * (PLLA = 1500) (PLLA = 1600) + * (MHz) (MHz) + *------------------------------------------------+-------------------- + * clkz 1000 (2/3) 800 (1/2) + * clkzs 250 (1/6) 200 (1/8) + * clki 750 (1/2) 800 (1/2) + * clks 250 (1/6) 200 (1/8) + * clks1 125 (1/12) 100 (1/16) + * clks3 187.5 (1/8) 200 (1/8) + * clks4 93.7 (1/16) 100 (1/16) + * clkp 62.5 (1/24) 50 (1/32) + * clkg 62.5 (1/24) 66.6 (1/24) + * clkb, CLKOUT + * (MD2 = 0) 62.5 (1/24) 66.6 (1/24) + * (MD2 = 1) 41.6 (1/36) 50 (1/32) + */ + +#define CPG_CLK_CONFIG_INDEX(md) (((md) & (BIT(2)|BIT(1))) >> 1) + +struct cpg_clk_config { + unsigned int z_mult; + unsigned int z_div; + unsigned int zs_and_s_div; + unsigned int s1_div; + unsigned int p_div; + unsigned int b_and_out_div; +}; + +static const struct cpg_clk_config cpg_clk_configs[4] __initconst = { + { 1, 2, 8, 16, 32, 24 }, + { 2, 3, 6, 12, 24, 24 }, + { 1, 2, 8, 16, 32, 32 }, + { 2, 3, 6, 12, 24, 36 }, +}; + +/* + * MD PLLA Ratio + * 12 11 + *------------------------ + * 0 0 x42 + * 0 1 x48 + * 1 0 x56 + * 1 1 x64 + */ + +#define CPG_PLLA_MULT_INDEX(md) (((md) & (BIT(12)|BIT(11))) >> 11) + +static const unsigned int cpg_plla_mult[4] __initconst = { 42, 48, 56, 64 }; + +/* ----------------------------------------------------------------------------- + * Initialization + */ + +static u32 cpg_mode __initdata; + +static struct clk * __init +r8a7779_cpg_register_clock(struct device_node *np, struct r8a7779_cpg *cpg, + const struct cpg_clk_config *config, + unsigned int plla_mult, const char *name) +{ + const char *parent_name = "plla"; + unsigned int mult = 1; + unsigned int div = 1; + + if (!strcmp(name, "plla")) { + parent_name = of_clk_get_parent_name(np, 0); + mult = plla_mult; + } else if (!strcmp(name, "z")) { + div = config->z_div; + mult = config->z_mult; + } else if (!strcmp(name, "zs") || !strcmp(name, "s")) { + div = config->zs_and_s_div; + } else if (!strcmp(name, "s1")) { + div = config->s1_div; + } else if (!strcmp(name, "p")) { + div = config->p_div; + } else if (!strcmp(name, "b") || !strcmp(name, "out")) { + div = config->b_and_out_div; + } else { + return ERR_PTR(-EINVAL); + } + + return clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div); +} + +static void __init r8a7779_cpg_clocks_init(struct device_node *np) +{ + const struct cpg_clk_config *config; + struct r8a7779_cpg *cpg; + struct clk **clks; + unsigned int i, plla_mult; + int num_clks; + + num_clks = of_property_count_strings(np, "clock-output-names"); + if (num_clks < 0) { + pr_err("%s: failed to count clocks\n", __func__); + return; + } + + cpg = kzalloc(sizeof(*cpg), GFP_KERNEL); + clks = kzalloc(CPG_NUM_CLOCKS * sizeof(*clks), GFP_KERNEL); + if (cpg == NULL || clks == NULL) { + /* We're leaking memory on purpose, there's no point in cleaning + * up as the system won't boot anyway. + */ + return; + } + + spin_lock_init(&cpg->lock); + + cpg->data.clks = clks; + cpg->data.clk_num = num_clks; + + config = &cpg_clk_configs[CPG_CLK_CONFIG_INDEX(cpg_mode)]; + plla_mult = cpg_plla_mult[CPG_PLLA_MULT_INDEX(cpg_mode)]; + + for (i = 0; i < num_clks; ++i) { + const char *name; + struct clk *clk; + + of_property_read_string_index(np, "clock-output-names", i, + &name); + + clk = r8a7779_cpg_register_clock(np, cpg, config, + plla_mult, name); + if (IS_ERR(clk)) + pr_err("%s: failed to register %s %s clock (%ld)\n", + __func__, np->name, name, PTR_ERR(clk)); + else + cpg->data.clks[i] = clk; + } + + of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data); +} +CLK_OF_DECLARE(r8a7779_cpg_clks, "renesas,r8a7779-cpg-clocks", + r8a7779_cpg_clocks_init); + +void __init r8a7779_clocks_init(u32 mode) +{ + cpg_mode = mode; + + of_clk_init(NULL); +} diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c index 501d513bf890..dd3a78c64795 100644 --- a/drivers/clk/socfpga/clk-gate.c +++ b/drivers/clk/socfpga/clk-gate.c @@ -32,7 +32,6 @@ #define SOCFPGA_MMC_CLK "sdmmc_clk" #define SOCFPGA_GPIO_DB_CLK_OFFSET 0xA8 -#define div_mask(width) ((1 << (width)) - 1) #define streq(a, b) (strcmp((a), (b)) == 0) #define to_socfpga_gate_clk(p) container_of(p, struct socfpga_gate_clk, hw.hw) diff --git a/drivers/clk/socfpga/clk-periph.c b/drivers/clk/socfpga/clk-periph.c index 81623a3736f9..46531c34ec9b 100644 --- a/drivers/clk/socfpga/clk-periph.c +++ b/drivers/clk/socfpga/clk-periph.c @@ -29,12 +29,18 @@ static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk, unsigned long parent_rate) { struct socfpga_periph_clk *socfpgaclk = to_socfpga_periph_clk(hwclk); - u32 div; + u32 div, val; - if (socfpgaclk->fixed_div) + if (socfpgaclk->fixed_div) { div = socfpgaclk->fixed_div; - else + } else { + if (socfpgaclk->div_reg) { + val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift; + val &= div_mask(socfpgaclk->width); + parent_rate /= (val + 1); + } div = ((readl(socfpgaclk->hw.reg) & 0x1ff) + 1); + } return parent_rate / div; } @@ -54,6 +60,7 @@ static __init void __socfpga_periph_init(struct device_node *node, struct clk_init_data init; int rc; u32 fixed_div; + u32 div_reg[3]; of_property_read_u32(node, "reg", ®); @@ -63,6 +70,15 @@ static __init void __socfpga_periph_init(struct device_node *node, periph_clk->hw.reg = clk_mgr_base_addr + reg; + rc = of_property_read_u32_array(node, "div-reg", div_reg, 3); + if (!rc) { + periph_clk->div_reg = clk_mgr_base_addr + div_reg[0]; + periph_clk->shift = div_reg[1]; + periph_clk->width = div_reg[2]; + } else { + periph_clk->div_reg = 0; + } + rc = of_property_read_u32(node, "fixed-divider", &fixed_div); if (rc) periph_clk->fixed_div = 0; diff --git a/drivers/clk/socfpga/clk.h b/drivers/clk/socfpga/clk.h index d2e54019c94f..d291f60c46e1 100644 --- a/drivers/clk/socfpga/clk.h +++ b/drivers/clk/socfpga/clk.h @@ -27,6 +27,7 @@ #define CLKMGR_PERPLL_SRC 0xAC #define SOCFPGA_MAX_PARENTS 3 +#define div_mask(width) ((1 << (width)) - 1) extern void __iomem *clk_mgr_base_addr; @@ -52,6 +53,9 @@ struct socfpga_periph_clk { struct clk_gate hw; char *parent_name; u32 fixed_div; + void __iomem *div_reg; + u32 width; /* only valid if div_reg != 0 */ + u32 shift; /* only valid if div_reg != 0 */ }; #endif /* SOCFPGA_CLK_H */ diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c index 9e232644f07e..3806d97e529b 100644 --- a/drivers/clk/sunxi/clk-factors.c +++ b/drivers/clk/sunxi/clk-factors.c @@ -77,6 +77,41 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate, return rate; } +static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_p) +{ + struct clk *clk = hw->clk, *parent, *best_parent = NULL; + int i, num_parents; + unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0; + + /* find the parent that can help provide the fastest rate <= rate */ + num_parents = __clk_get_num_parents(clk); + for (i = 0; i < num_parents; i++) { + parent = clk_get_parent_by_index(clk, i); + if (!parent) + continue; + if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT) + parent_rate = __clk_round_rate(parent, rate); + else + parent_rate = __clk_get_rate(parent); + + child_rate = clk_factors_round_rate(hw, rate, &parent_rate); + + if (child_rate <= rate && child_rate > best_child_rate) { + best_parent = parent; + best = parent_rate; + best_child_rate = child_rate; + } + } + + if (best_parent) + *best_parent_p = best_parent; + *best_parent_rate = best; + + return best_child_rate; +} + static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, } const struct clk_ops clk_factors_ops = { + .determine_rate = clk_factors_determine_rate, .recalc_rate = clk_factors_recalc_rate, .round_rate = clk_factors_round_rate, .set_rate = clk_factors_set_rate, diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index bd7dc733c1ca..4cc2b2a5aa75 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -507,6 +507,43 @@ CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk", /** + * clk_sunxi_mmc_phase_control() - configures MMC clock phase control + */ + +void clk_sunxi_mmc_phase_control(struct clk *clk, u8 sample, u8 output) +{ + #define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw) + #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) + + struct clk_hw *hw = __clk_get_hw(clk); + struct clk_composite *composite = to_clk_composite(hw); + struct clk_hw *rate_hw = composite->rate_hw; + struct clk_factors *factors = to_clk_factors(rate_hw); + unsigned long flags = 0; + u32 reg; + + if (factors->lock) + spin_lock_irqsave(factors->lock, flags); + + reg = readl(factors->reg); + + /* set sample clock phase control */ + reg &= ~(0x7 << 20); + reg |= ((sample & 0x7) << 20); + + /* set output clock phase control */ + reg &= ~(0x7 << 8); + reg |= ((output & 0x7) << 8); + + writel(reg, factors->reg); + + if (factors->lock) + spin_unlock_irqrestore(factors->lock, flags); +} +EXPORT_SYMBOL(clk_sunxi_mmc_phase_control); + + +/** * sunxi_factors_clk_setup() - Setup function for factor clocks */ diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h index c39613c519af..0011d547a9f7 100644 --- a/drivers/clk/tegra/clk-id.h +++ b/drivers/clk/tegra/clk-id.h @@ -233,6 +233,7 @@ enum clk_id { tegra_clk_xusb_hs_src, tegra_clk_xusb_ss, tegra_clk_xusb_ss_src, + tegra_clk_xusb_ss_div2, tegra_clk_max, }; diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index e1769addf435..39e0959b61bd 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -96,10 +96,20 @@ (PLLE_SS_MAX_VAL | PLLE_SS_INC_VAL | PLLE_SS_INCINTRV_VAL) #define PLLE_AUX_PLLP_SEL BIT(2) +#define PLLE_AUX_USE_LOCKDET BIT(3) #define PLLE_AUX_ENABLE_SWCTL BIT(4) +#define PLLE_AUX_SS_SWCTL BIT(6) #define PLLE_AUX_SEQ_ENABLE BIT(24) +#define PLLE_AUX_SEQ_START_STATE BIT(25) #define PLLE_AUX_PLLRE_SEL BIT(28) +#define XUSBIO_PLL_CFG0 0x51c +#define XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0) +#define XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL BIT(2) +#define XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET BIT(6) +#define XUSBIO_PLL_CFG0_SEQ_ENABLE BIT(24) +#define XUSBIO_PLL_CFG0_SEQ_START_STATE BIT(25) + #define PLLE_MISC_PLLE_PTS BIT(8) #define PLLE_MISC_IDDQ_SW_VALUE BIT(13) #define PLLE_MISC_IDDQ_SW_CTRL BIT(14) @@ -1318,7 +1328,28 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw) pll_writel(val, PLLE_SS_CTRL, pll); udelay(1); - /* TODO: enable hw control of xusb brick pll */ + /* Enable hw control of xusb brick pll */ + val = pll_readl_misc(pll); + val &= ~PLLE_MISC_IDDQ_SW_CTRL; + pll_writel_misc(val, pll); + + val = pll_readl(pll->params->aux_reg, pll); + val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SEQ_START_STATE); + val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL); + pll_writel(val, pll->params->aux_reg, pll); + udelay(1); + val |= PLLE_AUX_SEQ_ENABLE; + pll_writel(val, pll->params->aux_reg, pll); + + val = pll_readl(XUSBIO_PLL_CFG0, pll); + val |= (XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET | + XUSBIO_PLL_CFG0_SEQ_START_STATE); + val &= ~(XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL | + XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL); + pll_writel(val, XUSBIO_PLL_CFG0, pll); + udelay(1); + val |= XUSBIO_PLL_CFG0_SEQ_ENABLE; + pll_writel(val, XUSBIO_PLL_CFG0, pll); out: if (pll->lock) diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c index 1fa5c3f33b20..adf6b814b5bc 100644 --- a/drivers/clk/tegra/clk-tegra-periph.c +++ b/drivers/clk/tegra/clk-tegra-periph.c @@ -329,7 +329,9 @@ static u32 mux_clkm_pllp_pllc_pllre_idx[] = { static const char *mux_clkm_48M_pllp_480M[] = { "clk_m", "pll_u_48M", "pll_p", "pll_u_480M" }; -#define mux_clkm_48M_pllp_480M_idx NULL +static u32 mux_clkm_48M_pllp_480M_idx[] = { + [0] = 0, [1] = 2, [2] = 4, [3] = 6, +}; static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = { "clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref" @@ -338,6 +340,11 @@ static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = { [0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7, }; +static const char *mux_ss_60M[] = { + "xusb_ss_div2", "pll_u_60M" +}; +#define mux_ss_60M_idx NULL + static const char *mux_d_audio_clk[] = { "pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync", "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync", @@ -499,6 +506,7 @@ static struct tegra_periph_init_data periph_clks[] = { XUSB("xusb_falcon_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_falcon_src), XUSB("xusb_fs_src", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_fs_src), XUSB("xusb_ss_src", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_ss_src), + NODIV("xusb_hs_src", mux_ss_60M, CLK_SOURCE_XUSB_SS_SRC, 25, MASK(1), 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_hs_src, NULL), XUSB("xusb_dev_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_dev_src), }; diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index 80431f0fb268..b9c8ba258ef0 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -142,7 +142,6 @@ #define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) #define CLK_SOURCE_CSITE 0x1d4 -#define CLK_SOURCE_XUSB_SS_SRC 0x610 #define CLK_SOURCE_EMC 0x19c /* PLLM override registers */ @@ -834,6 +833,7 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = { [tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA114_CLK_XUSB_FALCON_SRC, .present = true }, [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA114_CLK_XUSB_FS_SRC, .present = true }, [tegra_clk_xusb_ss_src] = { .dt_id = TEGRA114_CLK_XUSB_SS_SRC, .present = true }, + [tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA114_CLK_XUSB_SS_DIV2, .present = true}, [tegra_clk_xusb_dev_src] = { .dt_id = TEGRA114_CLK_XUSB_DEV_SRC, .present = true }, [tegra_clk_xusb_dev] = { .dt_id = TEGRA114_CLK_XUSB_DEV, .present = true }, [tegra_clk_xusb_hs_src] = { .dt_id = TEGRA114_CLK_XUSB_HS_SRC, .present = true }, @@ -1182,16 +1182,11 @@ static __init void tegra114_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base) { struct clk *clk; - u32 val; - - /* xusb_hs_src */ - val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC); - val |= BIT(25); /* always select PLLU_60M */ - writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC); - clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0, - 1, 1); - clks[TEGRA114_CLK_XUSB_HS_SRC] = clk; + /* xusb_ss_div2 */ + clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0, + 1, 2); + clks[TEGRA114_CLK_XUSB_SS_DIV2] = clk; /* dsia mux */ clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0, @@ -1301,7 +1296,12 @@ static struct tegra_clk_init_table init_table[] __initdata = { {TEGRA114_CLK_GR3D, TEGRA114_CLK_PLL_C2, 300000000, 0}, {TEGRA114_CLK_DSIALP, TEGRA114_CLK_PLL_P, 68000000, 0}, {TEGRA114_CLK_DSIBLP, TEGRA114_CLK_PLL_P, 68000000, 0}, - + {TEGRA114_CLK_PLL_RE_VCO, TEGRA114_CLK_CLK_MAX, 612000000, 0}, + {TEGRA114_CLK_XUSB_SS_SRC, TEGRA114_CLK_PLL_RE_OUT, 122400000, 0}, + {TEGRA114_CLK_XUSB_FS_SRC, TEGRA114_CLK_PLL_U_48M, 48000000, 0}, + {TEGRA114_CLK_XUSB_HS_SRC, TEGRA114_CLK_XUSB_SS_DIV2, 61200000, 0}, + {TEGRA114_CLK_XUSB_FALCON_SRC, TEGRA114_CLK_PLL_P, 204000000, 0}, + {TEGRA114_CLK_XUSB_HOST_SRC, TEGRA114_CLK_PLL_P, 102000000, 0}, /* This MUST be the last entry. */ {TEGRA114_CLK_CLK_MAX, TEGRA114_CLK_CLK_MAX, 0, 0}, }; diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index cc37c342c4cb..80efe51fdcdf 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -30,7 +30,6 @@ #define CLK_SOURCE_CSITE 0x1d4 #define CLK_SOURCE_EMC 0x19c -#define CLK_SOURCE_XUSB_SS_SRC 0x610 #define PLLC_BASE 0x80 #define PLLC_OUT 0x84 @@ -925,6 +924,7 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA124_CLK_XUSB_FALCON_SRC, .present = true }, [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA124_CLK_XUSB_FS_SRC, .present = true }, [tegra_clk_xusb_ss_src] = { .dt_id = TEGRA124_CLK_XUSB_SS_SRC, .present = true }, + [tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA124_CLK_XUSB_SS_DIV2, .present = true }, [tegra_clk_xusb_dev_src] = { .dt_id = TEGRA124_CLK_XUSB_DEV_SRC, .present = true }, [tegra_clk_xusb_dev] = { .dt_id = TEGRA124_CLK_XUSB_DEV, .present = true }, [tegra_clk_xusb_hs_src] = { .dt_id = TEGRA124_CLK_XUSB_HS_SRC, .present = true }, @@ -1105,16 +1105,11 @@ static __init void tegra124_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base) { struct clk *clk; - u32 val; - - /* xusb_hs_src */ - val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC); - val |= BIT(25); /* always select PLLU_60M */ - writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC); - clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0, - 1, 1); - clks[TEGRA124_CLK_XUSB_HS_SRC] = clk; + /* xusb_ss_div2 */ + clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0, + 1, 2); + clks[TEGRA124_CLK_XUSB_SS_DIV2] = clk; /* dsia mux */ clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0, @@ -1368,6 +1363,12 @@ static struct tegra_clk_init_table init_table[] __initdata = { {TEGRA124_CLK_SBC4, TEGRA124_CLK_PLL_P, 12000000, 1}, {TEGRA124_CLK_TSEC, TEGRA124_CLK_PLL_C3, 0, 0}, {TEGRA124_CLK_MSENC, TEGRA124_CLK_PLL_C3, 0, 0}, + {TEGRA124_CLK_PLL_RE_VCO, TEGRA124_CLK_CLK_MAX, 672000000, 0}, + {TEGRA124_CLK_XUSB_SS_SRC, TEGRA124_CLK_PLL_U_480M, 120000000, 0}, + {TEGRA124_CLK_XUSB_FS_SRC, TEGRA124_CLK_PLL_U_48M, 48000000, 0}, + {TEGRA124_CLK_XUSB_HS_SRC, TEGRA124_CLK_PLL_U_60M, 60000000, 0}, + {TEGRA124_CLK_XUSB_FALCON_SRC, TEGRA124_CLK_PLL_RE_OUT, 224000000, 0}, + {TEGRA124_CLK_XUSB_HOST_SRC, TEGRA124_CLK_PLL_RE_OUT, 112000000, 0}, /* This MUST be the last entry. */ {TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0}, }; diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c index a820b0cfcf57..7f3868a227c8 100644 --- a/drivers/clk/versatile/clk-icst.c +++ b/drivers/clk/versatile/clk-icst.c @@ -160,3 +160,4 @@ struct clk *icst_clk_register(struct device *dev, return clk; } +EXPORT_SYMBOL_GPL(icst_clk_register); diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c index 31b44f025f9e..1cc1330dc570 100644 --- a/drivers/clk/versatile/clk-impd1.c +++ b/drivers/clk/versatile/clk-impd1.c @@ -20,6 +20,8 @@ #define IMPD1_LOCK 0x08 struct impd1_clk { + char *pclkname; + struct clk *pclk; char *vco1name; struct clk *vco1clk; char *vco2name; @@ -31,7 +33,7 @@ struct impd1_clk { struct clk *spiclk; char *scname; struct clk *scclk; - struct clk_lookup *clks[6]; + struct clk_lookup *clks[15]; }; /* One entry for each connected IM-PD1 LM */ @@ -86,6 +88,7 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id) { struct impd1_clk *imc; struct clk *clk; + struct clk *pclk; int i; if (id > 3) { @@ -94,11 +97,18 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id) } imc = &impd1_clks[id]; + /* Register the fixed rate PCLK */ + imc->pclkname = kasprintf(GFP_KERNEL, "lm%x-pclk", id); + pclk = clk_register_fixed_rate(NULL, imc->pclkname, NULL, + CLK_IS_ROOT, 0); + imc->pclk = pclk; + imc->vco1name = kasprintf(GFP_KERNEL, "lm%x-vco1", id); clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, NULL, base); imc->vco1clk = clk; - imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id); + imc->clks[0] = clkdev_alloc(pclk, "apb_pclk", "lm%x:01000", id); + imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:01000", id); /* VCO2 is also called "CLK2" */ imc->vco2name = kasprintf(GFP_KERNEL, "lm%x-vco2", id); @@ -107,32 +117,43 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id) imc->vco2clk = clk; /* MMCI uses CLK2 right off */ - imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00700", id); + imc->clks[2] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00700", id); + imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00700", id); /* UART reference clock divides CLK2 by a fixed factor 4 */ imc->uartname = kasprintf(GFP_KERNEL, "lm%x-uartclk", id); clk = clk_register_fixed_factor(NULL, imc->uartname, imc->vco2name, CLK_IGNORE_UNUSED, 1, 4); imc->uartclk = clk; - imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00100", id); - imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00200", id); + imc->clks[4] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00100", id); + imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00100", id); + imc->clks[6] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00200", id); + imc->clks[7] = clkdev_alloc(clk, NULL, "lm%x:00200", id); /* SPI PL022 clock divides CLK2 by a fixed factor 64 */ imc->spiname = kasprintf(GFP_KERNEL, "lm%x-spiclk", id); clk = clk_register_fixed_factor(NULL, imc->spiname, imc->vco2name, CLK_IGNORE_UNUSED, 1, 64); - imc->clks[4] = clkdev_alloc(clk, NULL, "lm%x:00300", id); + imc->clks[8] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00300", id); + imc->clks[9] = clkdev_alloc(clk, NULL, "lm%x:00300", id); + + /* The GPIO blocks and AACI have only PCLK */ + imc->clks[10] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00400", id); + imc->clks[11] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00500", id); + imc->clks[12] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00800", id); /* Smart Card clock divides CLK2 by a fixed factor 4 */ imc->scname = kasprintf(GFP_KERNEL, "lm%x-scclk", id); clk = clk_register_fixed_factor(NULL, imc->scname, imc->vco2name, CLK_IGNORE_UNUSED, 1, 4); imc->scclk = clk; - imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00600", id); + imc->clks[13] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00600", id); + imc->clks[14] = clkdev_alloc(clk, NULL, "lm%x:00600", id); for (i = 0; i < ARRAY_SIZE(imc->clks); i++) clkdev_add(imc->clks[i]); } +EXPORT_SYMBOL_GPL(integrator_impd1_clk_init); void integrator_impd1_clk_exit(unsigned int id) { @@ -149,9 +170,12 @@ void integrator_impd1_clk_exit(unsigned int id) clk_unregister(imc->uartclk); clk_unregister(imc->vco2clk); clk_unregister(imc->vco1clk); + clk_unregister(imc->pclk); kfree(imc->scname); kfree(imc->spiname); kfree(imc->uartname); kfree(imc->vco2name); kfree(imc->vco1name); + kfree(imc->pclkname); } +EXPORT_SYMBOL_GPL(integrator_impd1_clk_exit); diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c index 52c09afdcfb7..246cf1226eaa 100644 --- a/drivers/clk/zynq/clkc.c +++ b/drivers/clk/zynq/clkc.c @@ -53,6 +53,9 @@ static void __iomem *zynq_clkc_base; #define NUM_MIO_PINS 54 +#define DBG_CLK_CTRL_CLKACT_TRC BIT(0) +#define DBG_CLK_CTRL_CPU_1XCLKACT BIT(1) + enum zynq_clk { armpll, ddrpll, iopll, cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x, @@ -499,6 +502,15 @@ static void __init zynq_clk_setup(struct device_node *np) clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0, &dbgclk_lock); + /* leave debug clocks in the state the bootloader set them up to */ + tmp = clk_readl(SLCR_DBG_CLK_CTRL); + if (tmp & DBG_CLK_CTRL_CLKACT_TRC) + if (clk_prepare_enable(clks[dbg_trc])) + pr_warn("%s: trace clk enable failed\n", __func__); + if (tmp & DBG_CLK_CTRL_CPU_1XCLKACT) + if (clk_prepare_enable(clks[dbg_apb])) + pr_warn("%s: debug APB clk enable failed\n", __func__); + /* One gated clock for all APER clocks. */ clks[dma] = clk_register_gate(NULL, clk_output_name[dma], clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0, diff --git a/include/dt-bindings/clock/bcm21664.h b/include/dt-bindings/clock/bcm21664.h new file mode 100644 index 000000000000..5a7f0e4750a8 --- /dev/null +++ b/include/dt-bindings/clock/bcm21664.h @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * Copyright 2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CLOCK_BCM21664_H +#define _CLOCK_BCM21664_H + +/* + * This file defines the values used to specify clocks provided by + * the clock control units (CCUs) on Broadcom BCM21664 family SoCs. + */ + +/* bcm21664 CCU device tree "compatible" strings */ +#define BCM21664_DT_ROOT_CCU_COMPAT "brcm,bcm21664-root-ccu" +#define BCM21664_DT_AON_CCU_COMPAT "brcm,bcm21664-aon-ccu" +#define BCM21664_DT_MASTER_CCU_COMPAT "brcm,bcm21664-master-ccu" +#define BCM21664_DT_SLAVE_CCU_COMPAT "brcm,bcm21664-slave-ccu" + +/* root CCU clock ids */ + +#define BCM21664_ROOT_CCU_FRAC_1M 0 +#define BCM21664_ROOT_CCU_CLOCK_COUNT 1 + +/* aon CCU clock ids */ + +#define BCM21664_AON_CCU_HUB_TIMER 0 +#define BCM21664_AON_CCU_CLOCK_COUNT 1 + +/* master CCU clock ids */ + +#define BCM21664_MASTER_CCU_SDIO1 0 +#define BCM21664_MASTER_CCU_SDIO2 1 +#define BCM21664_MASTER_CCU_SDIO3 2 +#define BCM21664_MASTER_CCU_SDIO4 3 +#define BCM21664_MASTER_CCU_SDIO1_SLEEP 4 +#define BCM21664_MASTER_CCU_SDIO2_SLEEP 5 +#define BCM21664_MASTER_CCU_SDIO3_SLEEP 6 +#define BCM21664_MASTER_CCU_SDIO4_SLEEP 7 +#define BCM21664_MASTER_CCU_CLOCK_COUNT 8 + +/* slave CCU clock ids */ + +#define BCM21664_SLAVE_CCU_UARTB 0 +#define BCM21664_SLAVE_CCU_UARTB2 1 +#define BCM21664_SLAVE_CCU_UARTB3 2 +#define BCM21664_SLAVE_CCU_BSC1 3 +#define BCM21664_SLAVE_CCU_BSC2 4 +#define BCM21664_SLAVE_CCU_BSC3 5 +#define BCM21664_SLAVE_CCU_BSC4 6 +#define BCM21664_SLAVE_CCU_CLOCK_COUNT 7 + +#endif /* _CLOCK_BCM21664_H */ diff --git a/include/dt-bindings/clock/bcm281xx.h b/include/dt-bindings/clock/bcm281xx.h index e0096940886d..a763460cf1af 100644 --- a/include/dt-bindings/clock/bcm281xx.h +++ b/include/dt-bindings/clock/bcm281xx.h @@ -20,6 +20,18 @@ * the clock control units (CCUs) on Broadcom BCM281XX family SoCs. */ +/* + * These are the bcm281xx CCU device tree "compatible" strings. + * We're stuck with using "bcm11351" in the string because wild + * cards aren't allowed, and that name was the first one defined + * in this family of devices. + */ +#define BCM281XX_DT_ROOT_CCU_COMPAT "brcm,bcm11351-root-ccu" +#define BCM281XX_DT_AON_CCU_COMPAT "brcm,bcm11351-aon-ccu" +#define BCM281XX_DT_HUB_CCU_COMPAT "brcm,bcm11351-hub-ccu" +#define BCM281XX_DT_MASTER_CCU_COMPAT "brcm,bcm11351-master-ccu" +#define BCM281XX_DT_SLAVE_CCU_COMPAT "brcm,bcm11351-slave-ccu" + /* root CCU clock ids */ #define BCM281XX_ROOT_CCU_FRAC_1M 0 diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h new file mode 100644 index 000000000000..aad579a75802 --- /dev/null +++ b/include/dt-bindings/clock/hix5hd2-clock.h @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2014 Linaro Ltd. + * Copyright (c) 2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef __DTS_HIX5HD2_CLOCK_H +#define __DTS_HIX5HD2_CLOCK_H + +/* fixed rate */ +#define HIX5HD2_FIXED_1200M 1 +#define HIX5HD2_FIXED_400M 2 +#define HIX5HD2_FIXED_48M 3 +#define HIX5HD2_FIXED_24M 4 +#define HIX5HD2_FIXED_600M 5 +#define HIX5HD2_FIXED_300M 6 +#define HIX5HD2_FIXED_75M 7 +#define HIX5HD2_FIXED_200M 8 +#define HIX5HD2_FIXED_100M 9 +#define HIX5HD2_FIXED_40M 10 +#define HIX5HD2_FIXED_150M 11 +#define HIX5HD2_FIXED_1728M 12 +#define HIX5HD2_FIXED_28P8M 13 +#define HIX5HD2_FIXED_432M 14 +#define HIX5HD2_FIXED_345P6M 15 +#define HIX5HD2_FIXED_288M 16 +#define HIX5HD2_FIXED_60M 17 +#define HIX5HD2_FIXED_750M 18 +#define HIX5HD2_FIXED_500M 19 +#define HIX5HD2_FIXED_54M 20 +#define HIX5HD2_FIXED_27M 21 +#define HIX5HD2_FIXED_1500M 22 +#define HIX5HD2_FIXED_375M 23 +#define HIX5HD2_FIXED_187M 24 +#define HIX5HD2_FIXED_250M 25 +#define HIX5HD2_FIXED_125M 26 +#define HIX5HD2_FIXED_2P02M 27 +#define HIX5HD2_FIXED_50M 28 +#define HIX5HD2_FIXED_25M 29 +#define HIX5HD2_FIXED_83M 30 + +/* mux clocks */ +#define HIX5HD2_SFC_MUX 64 +#define HIX5HD2_MMC_MUX 65 +#define HIX5HD2_FEPHY_MUX 66 + +/* gate clocks */ +#define HIX5HD2_SFC_RST 128 +#define HIX5HD2_SFC_CLK 129 +#define HIX5HD2_MMC_CIU_CLK 130 +#define HIX5HD2_MMC_BIU_CLK 131 +#define HIX5HD2_MMC_CIU_RST 132 + +#define HIX5HD2_NR_CLKS 256 +#endif /* __DTS_HIX5HD2_CLOCK_H */ diff --git a/include/dt-bindings/clock/qcom,gcc-msm8960.h b/include/dt-bindings/clock/qcom,gcc-msm8960.h index 03bbf49d43b7..f9f547146a15 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8960.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h @@ -51,7 +51,7 @@ #define QDSS_TSCTR_CLK 34 #define SFAB_ADM0_M0_A_CLK 35 #define SFAB_ADM0_M1_A_CLK 36 -#define SFAB_ADM0_M2_A_CLK 37 +#define SFAB_ADM0_M2_H_CLK 37 #define ADM0_CLK 38 #define ADM0_PBUS_CLK 39 #define MSS_XPU_CLK 40 @@ -99,7 +99,7 @@ #define CFPB2_H_CLK 82 #define SFAB_CFPB_M_H_CLK 83 #define CFPB_MASTER_H_CLK 84 -#define SFAB_CFPB_S_HCLK 85 +#define SFAB_CFPB_S_H_CLK 85 #define CFPB_SPLITTER_H_CLK 86 #define TSIF_H_CLK 87 #define TSIF_INACTIVITY_TIMERS_CLK 88 @@ -110,7 +110,6 @@ #define CE1_SLEEP_CLK 93 #define CE2_H_CLK 94 #define CE2_CORE_CLK 95 -#define CE2_SLEEP_CLK 96 #define SFPB_H_CLK_SRC 97 #define SFPB_H_CLK 98 #define SFAB_SFPB_M_H_CLK 99 @@ -252,7 +251,7 @@ #define MSS_S_H_CLK 235 #define MSS_CXO_SRC_CLK 236 #define SATA_H_CLK 237 -#define SATA_SRC_CLK 238 +#define SATA_CLK_SRC 238 #define SATA_RXOOB_CLK 239 #define SATA_PMALIVE_CLK 240 #define SATA_PHY_REF_CLK 241 diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h index 6d0d8d8ef31e..fc12621fb432 100644 --- a/include/dt-bindings/clock/tegra114-car.h +++ b/include/dt-bindings/clock/tegra114-car.h @@ -337,6 +337,7 @@ #define TEGRA114_CLK_CLK_OUT_3_MUX 308 #define TEGRA114_CLK_DSIA_MUX 309 #define TEGRA114_CLK_DSIB_MUX 310 -#define TEGRA114_CLK_CLK_MAX 311 +#define TEGRA114_CLK_XUSB_SS_DIV2 311 +#define TEGRA114_CLK_CLK_MAX 312 #endif /* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */ diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h index 433528ab5161..8a4c5892890f 100644 --- a/include/dt-bindings/clock/tegra124-car.h +++ b/include/dt-bindings/clock/tegra124-car.h @@ -336,6 +336,7 @@ #define TEGRA124_CLK_DSIA_MUX 309 #define TEGRA124_CLK_DSIB_MUX 310 #define TEGRA124_CLK_SOR0_LVDS 311 -#define TEGRA124_CLK_CLK_MAX 312 +#define TEGRA124_CLK_XUSB_SS_DIV2 312 +#define TEGRA124_CLK_CLK_MAX 313 #endif /* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */ diff --git a/include/dt-bindings/reset/qcom,gcc-msm8960.h b/include/dt-bindings/reset/qcom,gcc-msm8960.h index a840e680323c..07edd0e65eed 100644 --- a/include/dt-bindings/reset/qcom,gcc-msm8960.h +++ b/include/dt-bindings/reset/qcom,gcc-msm8960.h @@ -58,7 +58,7 @@ #define PPSS_PROC_RESET 41 #define PPSS_RESET 42 #define DMA_BAM_RESET 43 -#define SIC_TIC_RESET 44 +#define SPS_TIC_H_RESET 44 #define SLIMBUS_H_RESET 45 #define SFAB_CFPB_M_RESET 46 #define SFAB_CFPB_S_RESET 47 diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 511917416fb0..c7135dbbcd65 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -40,14 +40,14 @@ struct dentry; * through the clk_* api. * * @prepare: Prepare the clock for enabling. This must not return until - * the clock is fully prepared, and it's safe to call clk_enable. - * This callback is intended to allow clock implementations to - * do any initialisation that may sleep. Called with - * prepare_lock held. + * the clock is fully prepared, and it's safe to call clk_enable. + * This callback is intended to allow clock implementations to + * do any initialisation that may sleep. Called with + * prepare_lock held. * * @unprepare: Release the clock from its prepared state. This will typically - * undo any work done in the @prepare callback. Called with - * prepare_lock held. + * undo any work done in the @prepare callback. Called with + * prepare_lock held. * * @is_prepared: Queries the hardware to determine if the clock is prepared. * This function is allowed to sleep. Optional, if this op is not @@ -58,16 +58,16 @@ struct dentry; * Called with prepare mutex held. This function may sleep. * * @enable: Enable the clock atomically. This must not return until the - * clock is generating a valid clock signal, usable by consumer - * devices. Called with enable_lock held. This function must not - * sleep. + * clock is generating a valid clock signal, usable by consumer + * devices. Called with enable_lock held. This function must not + * sleep. * * @disable: Disable the clock atomically. Called with enable_lock held. - * This function must not sleep. + * This function must not sleep. * * @is_enabled: Queries the hardware to determine if the clock is enabled. - * This function must not sleep. Optional, if this op is not - * set then the enable count will be used. + * This function must not sleep. Optional, if this op is not + * set then the enable count will be used. * * @disable_unused: Disable the clock atomically. Only called from * clk_disable_unused for gate clocks with special needs. @@ -75,34 +75,35 @@ struct dentry; * sleep. * * @recalc_rate Recalculate the rate of this clock, by querying hardware. The - * parent rate is an input parameter. It is up to the caller to - * ensure that the prepare_mutex is held across this call. - * Returns the calculated rate. Optional, but recommended - if - * this op is not set then clock rate will be initialized to 0. + * parent rate is an input parameter. It is up to the caller to + * ensure that the prepare_mutex is held across this call. + * Returns the calculated rate. Optional, but recommended - if + * this op is not set then clock rate will be initialized to 0. * * @round_rate: Given a target rate as input, returns the closest rate actually - * supported by the clock. + * supported by the clock. The parent rate is an input/output + * parameter. * * @determine_rate: Given a target rate as input, returns the closest rate * actually supported by the clock, and optionally the parent clock * that should be used to provide the clock rate. * - * @get_parent: Queries the hardware to determine the parent of a clock. The - * return value is a u8 which specifies the index corresponding to - * the parent clock. This index can be applied to either the - * .parent_names or .parents arrays. In short, this function - * translates the parent value read from hardware into an array - * index. Currently only called when the clock is initialized by - * __clk_init. This callback is mandatory for clocks with - * multiple parents. It is optional (and unnecessary) for clocks - * with 0 or 1 parents. - * * @set_parent: Change the input source of this clock; for clocks with multiple - * possible parents specify a new parent by passing in the index - * as a u8 corresponding to the parent in either the .parent_names - * or .parents arrays. This function in affect translates an - * array index into the value programmed into the hardware. - * Returns 0 on success, -EERROR otherwise. + * possible parents specify a new parent by passing in the index + * as a u8 corresponding to the parent in either the .parent_names + * or .parents arrays. This function in affect translates an + * array index into the value programmed into the hardware. + * Returns 0 on success, -EERROR otherwise. + * + * @get_parent: Queries the hardware to determine the parent of a clock. The + * return value is a u8 which specifies the index corresponding to + * the parent clock. This index can be applied to either the + * .parent_names or .parents arrays. In short, this function + * translates the parent value read from hardware into an array + * index. Currently only called when the clock is initialized by + * __clk_init. This callback is mandatory for clocks with + * multiple parents. It is optional (and unnecessary) for clocks + * with 0 or 1 parents. * * @set_rate: Change the rate of this clock. The requested rate is specified * by the second argument, which should typically be the return @@ -110,13 +111,6 @@ struct dentry; * which is likely helpful for most .set_rate implementation. * Returns 0 on success, -EERROR otherwise. * - * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy - * is expressed in ppb (parts per billion). The parent accuracy is - * an input parameter. - * Returns the calculated accuracy. Optional - if this op is not - * set then clock accuracy will be initialized to parent accuracy - * or 0 (perfect clock) if clock has no parent. - * * @set_rate_and_parent: Change the rate and the parent of this clock. The * requested rate is specified by the second argument, which * should typically be the return of .round_rate call. The @@ -128,6 +122,18 @@ struct dentry; * separately via calls to .set_parent and .set_rate. * Returns 0 on success, -EERROR otherwise. * + * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy + * is expressed in ppb (parts per billion). The parent accuracy is + * an input parameter. + * Returns the calculated accuracy. Optional - if this op is not + * set then clock accuracy will be initialized to parent accuracy + * or 0 (perfect clock) if clock has no parent. + * + * @init: Perform platform-specific initialization magic. + * This is not not used by any of the basic clock types. + * Please consider other ways of solving initialization problems + * before using this callback, as its use is discouraged. + * * @debug_init: Set up type-specific debugfs entries for this clock. This * is called once, after the debugfs directory entry for this * clock has been created. The dentry pointer representing that @@ -157,15 +163,15 @@ struct clk_ops { void (*disable_unused)(struct clk_hw *hw); unsigned long (*recalc_rate)(struct clk_hw *hw, unsigned long parent_rate); - long (*round_rate)(struct clk_hw *hw, unsigned long, - unsigned long *); + long (*round_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate); long (*determine_rate)(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate, struct clk **best_parent_clk); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); - int (*set_rate)(struct clk_hw *hw, unsigned long, - unsigned long); + int (*set_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate); int (*set_rate_and_parent)(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate, u8 index); @@ -254,12 +260,12 @@ void of_fixed_clk_setup(struct device_node *np); * * Flags: * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to - * enable the clock. Setting this flag does the opposite: setting the bit - * disable the clock and clearing it enables the clock + * enable the clock. Setting this flag does the opposite: setting the bit + * disable the clock and clearing it enables the clock * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit - * of this register, and mask of gate bits are in higher 16-bit of this - * register. While setting the gate bits, higher 16-bit should also be - * updated to indicate changing gate bits. + * of this register, and mask of gate bits are in higher 16-bit of this + * register. While setting the gate bits, higher 16-bit should also be + * updated to indicate changing gate bits. */ struct clk_gate { struct clk_hw hw; @@ -298,20 +304,24 @@ struct clk_div_table { * * Flags: * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the - * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is - * the raw value read from the register, with the value of zero considered + * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is + * the raw value read from the register, with the value of zero considered * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set. * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from - * the hardware register + * the hardware register * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. * Some hardware implementations gracefully handle this case and allow a * zero divisor by not modifying their input clock * (divide by one / bypass). * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit - * of this register, and mask of divider bits are in higher 16-bit of this - * register. While setting the divider bits, higher 16-bit should also be - * updated to indicate changing divider bits. + * of this register, and mask of divider bits are in higher 16-bit of this + * register. While setting the divider bits, higher 16-bit should also be + * updated to indicate changing divider bits. + * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded + * to the closest integer instead of the up one. + * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should + * not be changed by the clock framework. */ struct clk_divider { struct clk_hw hw; @@ -327,8 +337,11 @@ struct clk_divider { #define CLK_DIVIDER_POWER_OF_TWO BIT(1) #define CLK_DIVIDER_ALLOW_ZERO BIT(2) #define CLK_DIVIDER_HIWORD_MASK BIT(3) +#define CLK_DIVIDER_ROUND_CLOSEST BIT(4) +#define CLK_DIVIDER_READ_ONLY BIT(5) extern const struct clk_ops clk_divider_ops; +extern const struct clk_ops clk_divider_ro_ops; struct clk *clk_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, @@ -356,9 +369,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this - * register, and mask of mux bits are in higher 16-bit of this register. - * While setting the mux bits, higher 16-bit should also be updated to - * indicate changing mux bits. + * register, and mask of mux bits are in higher 16-bit of this register. + * While setting the mux bits, higher 16-bit should also be updated to + * indicate changing mux bits. */ struct clk_mux { struct clk_hw hw; diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h index f9bf080a1123..9f8a14041dd5 100644 --- a/include/linux/clk/shmobile.h +++ b/include/linux/clk/shmobile.h @@ -1,7 +1,9 @@ /* * Copyright 2013 Ideas On Board SPRL + * Copyright 2013, 2014 Horms Solutions Ltd. * * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Contact: Simon Horman <horms@verge.net.au> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,6 +16,7 @@ #include <linux/types.h> +void r8a7779_clocks_init(u32 mode); void rcar_gen2_clocks_init(u32 mode); #endif diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 000000000000..aed28c4451d9 --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2013 - Hans de Goede <hdegoede@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +#include <linux/clk.h> + +void clk_sunxi_mmc_phase_control(struct clk *clk, u8 sample, u8 output); + +#endif |