diff options
31 files changed, 1112 insertions, 104 deletions
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 13e34241145b..4af5b8f4f803 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -155,6 +155,12 @@ properties: - const: seeed,stm32mp157c-odyssey-som - const: st,stm32mp157 + - description: Phytec STM32MP1 SoM based Boards + items: + - const: phytec,phycore-stm32mp1-3 + - const: phytec,phycore-stm32mp157c-som + - const: st,stm32mp157 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index c488308d7be1..53560052aaf0 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -74,8 +74,6 @@ properties: - const: 2 required: - - "#address-cells" - - "#size-cells" - compatible - reg - clocks diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cbc177ce50fd..fa60e9291480 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1267,7 +1267,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-ev1.dtb \ stm32mp157c-ev1-scmi.dtb \ stm32mp157c-lxa-mc1.dtb \ - stm32mp157c-odyssey.dtb + stm32mp157c-odyssey.dtb \ + stm32mp157c-phycore-stm32mp1-3.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 5a0daf8e8b11..cbbd521bf010 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -160,7 +160,7 @@ }; }; - panel-dsi@0 { + panel@0 { compatible = "orisetech,otm8009a"; reg = <0>; /* dsi virtual channel (0..3) */ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; @@ -179,7 +179,7 @@ status = "okay"; port { - ltdc_out_dsi: endpoint@0 { + ltdc_out_dsi: endpoint { remote-endpoint = <&dsi_in>; }; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index dc868e6da40e..e3564b74a779 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -515,7 +515,7 @@ crc: crc@40023000 { compatible = "st,stm32f7-crc"; reg = <0x40023000 0x400>; - clocks = <&rcc 0 12>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(CRC)>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/stm32h750i-art-pi.dts index f3e70d3b65ac..44c307f8b09c 100644 --- a/arch/arm/boot/dts/stm32h750i-art-pi.dts +++ b/arch/arm/boot/dts/stm32h750i-art-pi.dts @@ -208,7 +208,7 @@ dmas = <&dmamux1 45 0x400 0x05>, <&dmamux1 46 0x400 0x05>; dma-names = "rx", "tx"; - st,hw-flow-ctrl; + uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index e86d989dd351..06e969aa5fdb 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -341,6 +341,56 @@ }; }; + ethernet0_rgmii_pins_d: rgmii-3 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_d: rgmii-sleep-3 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + ethernet0_rmii_pins_a: rmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ @@ -1441,6 +1491,30 @@ }; }; + sai2b_pins_d: sai2b-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('C', 0, AF8)>, /* SAI2_FS_B */ + <STM32_PINMUX('H', 3, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_d: sai2b-sleep-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('C', 0, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('H', 3, ANALOG)>, /* SAI2_MCLK_B */ + <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + sai4a_pins_a: sai4a-0 { pins { pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ @@ -1522,6 +1596,60 @@ }; }; + sdmmc1_b4_pins_b: sdmmc1-b4-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_b: sdmmc1-b4-od-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_b: sdmmc1-b4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + sdmmc1_dir_pins_a: sdmmc1-dir-0 { pins1 { pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ @@ -1759,6 +1887,27 @@ }; }; + sdmmc2_d47_pins_e: sdmmc2-d47-4 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_e: sdmmc2-d47-sleep-4 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + sdmmc3_b4_pins_a: sdmmc3-b4-0 { pins1 { pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ @@ -2124,6 +2273,33 @@ }; }; + usart1_pins_a: usart1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */ + bias-disable; + }; + }; + + usart1_idle_pins_a: usart1-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */ + <STM32_PINMUX('A', 11, AF7)>; /* USART1_CTS_NSS */ + }; + }; + + usart1_sleep_pins_a: usart1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* USART1_RTS */ + <STM32_PINMUX('A', 11, ANALOG)>; /* USART1_CTS_NSS */ + }; + }; + usart2_pins_a: usart2-0 { pins1 { pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */ @@ -2226,6 +2402,23 @@ }; }; + usart3_idle_pins_a: usart3-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>; /* USART3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ + bias-disable; + }; + }; + + usart3_sleep_pins_a: usart3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ + <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */ + }; + }; + usart3_pins_b: usart3-1 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */ @@ -2463,4 +2656,42 @@ bias-disable; }; }; + + spi1_sleep_pins_a: spi1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 1, ANALOG)>, /* SPI1_MISO */ + <STM32_PINMUX('Z', 2, ANALOG)>; /* SPI1_MOSI */ + }; + }; + + usart1_pins_b: usart1-1 { + pins1 { + pinmux = <STM32_PINMUX('Z', 7, AF7)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */ + bias-disable; + }; + }; + + usart1_idle_pins_b: usart1-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('Z', 7, ANALOG)>; /* USART1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('Z', 6, AF7)>; /* USART1_RX */ + bias-disable; + }; + }; + + usart1_sleep_pins_b: usart1-sleep-1 { + pins { + pinmux = <STM32_PINMUX('Z', 7, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('Z', 6, ANALOG)>; /* USART1_RX */ + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 63f4c78fcc1d..61508917521c 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1093,6 +1093,8 @@ adc1: adc@0 { compatible = "st,stm32mp1-adc"; #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x0>; interrupt-parent = <&adc>; interrupts = <0>; @@ -1104,12 +1106,24 @@ adc2: adc@100 { compatible = "st,stm32mp1-adc"; #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x100>; interrupt-parent = <&adc>; interrupts = <1>; dmas = <&dmamux1 10 0x400 0x01>; dma-names = "rx"; + nvmem-cells = <&vrefint>; + nvmem-cell-names = "vrefint"; status = "disabled"; + channel@13 { + reg = <13>; + label = "vrefint"; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + }; }; }; @@ -1529,11 +1543,6 @@ clock-names = "lcd"; resets = <&rcc LTDC_R>; status = "disabled"; - - port { - #address-cells = <1>; - #size-cells = <0>; - }; }; iwdg2: watchdog@5a002000 { @@ -1620,6 +1629,12 @@ reg = <0x5c005000 0x400>; #address-cells = <1>; #size-cells = <1>; + part_number_otp: part-number-otp@4 { + reg = <0x4 0x1>; + }; + vrefint: vrefin-cal@52 { + reg = <0x52 0x2>; + }; ts_cal1: calib@5c { reg = <0x5c 0x2>; }; @@ -1820,8 +1835,8 @@ <0x30000000 0x40000>, <0x38000000 0x10000>; resets = <&rcc MCU_R>; + reset-names = "mcu_rst"; st,syscfg-holdboot = <&rcc 0x10C 0x1>; - st,syscfg-tz = <&rcc 0x000 0x1>; st,syscfg-pdds = <&pwr_mcu 0x0 0x1>; st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi index 54e73ccea446..5e733cd16ff9 100644 --- a/arch/arm/boot/dts/stm32mp157.dtsi +++ b/arch/arm/boot/dts/stm32mp157.dtsi @@ -24,14 +24,7 @@ clock-names = "pclk", "ref", "px_clk"; resets = <&rcc DSI_R>; reset-names = "apb"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts index e539cc80bef8..afcd6285890c 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts @@ -55,8 +55,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts index 9a2a4bc7d079..4279b26547df 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts @@ -49,6 +49,9 @@ phy-dsi-supply = <®18>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; dsi_in: endpoint { @@ -104,8 +107,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&dsi_in>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts index 390ee8c05754..efba54289820 100644 --- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts @@ -49,6 +49,9 @@ phy-dsi-supply = <®18>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; dsi_in_ltdc: endpoint { @@ -104,8 +107,7 @@ status = "okay"; port { - ltdc_out_dsi: endpoint@0 { - reg = <0>; + ltdc_out_dsi: endpoint { remote-endpoint = <&dsi_in_ltdc>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts index 0d7560ba2950..5116a7785201 100644 --- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts @@ -81,8 +81,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&panel_in>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi index 3a36f7fe0a2c..5f85598cc7c6 100644 --- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi @@ -287,7 +287,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&usart2_pins_b>; pinctrl-1 = <&usart2_sleep_pins_b>; - st,hw-flow-ctrl; + uart-has-rtscts; /delete-property/dmas; /delete-property/dma-names; status = "okay"; @@ -297,7 +297,7 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_c>; - st,hw-flow-ctrl; + uart-has-rtscts; /delete-property/dmas; /delete-property/dma-names; status = "okay"; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts index 97e4f94b0a24..39358d902000 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts @@ -61,8 +61,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index ab13e340f4ef..4bef2300ed7c 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -31,10 +31,15 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; phy-dsi-supply = <®18>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; dsi_in: endpoint { @@ -82,6 +87,9 @@ status = "okay"; port { + #address-cells = <1>; + #size-cells = <0>; + ltdc_ep1_out: endpoint@1 { reg = <1>; remote-endpoint = <&dsi_in>; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts index 9cf0a44d2f47..07ea765a4553 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts @@ -60,8 +60,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 8beb901be506..66ed5f9921ba 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -103,10 +103,20 @@ vref-supply = <&vdda>; status = "disabled"; adc1: adc@0 { - st,adc-channels = <0 1 6>; - /* 16.5 ck_cycles sampling time */ - st,min-sample-time-nsecs = <400>; status = "okay"; + channel@0 { + reg = <0>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <400>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <400>; + }; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <400>; + }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index b01470a9a3d5..94e38141af67 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -97,9 +97,11 @@ adc1: adc@0 { pinctrl-names = "default"; pinctrl-0 = <&adc1_in6_pins_a>; - st,min-sample-time-nsecs = <5000>; - st,adc-channels = <6>; status = "disabled"; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; }; adc2: adc@100 { diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts index 3b9dd6f4ccc9..813086ec2489 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts @@ -66,8 +66,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index ba8e9d9a42fa..af3800501875 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -101,9 +101,14 @@ &dsi { phy-dsi-supply = <®18>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; dsi_in: endpoint { @@ -119,7 +124,7 @@ }; }; - panel-dsi@0 { + panel@0 { compatible = "raydium,rm68200"; reg = <0>; reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; @@ -185,7 +190,9 @@ reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; + AVDD-supply = <&v2v8>; DOVDD-supply = <&v2v8>; + DVDD-supply = <&v2v8>; powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; rotation = <180>; @@ -239,8 +246,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&dsi_in>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index 407ed3952f75..eada9cf257be 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -161,8 +161,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&panel_input>; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts new file mode 100644 index 000000000000..28d7203264ce --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved + * Author: Dom VOVARD <dom.vovard@linrt.com>. + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/stm32-pinfunc.h> +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp157c-phycore-stm32mp15-som.dtsi" + +/ { + model = "PHYTEC phyCORE-STM32MP1-3 Dev Board"; + compatible = "phytec,phycore-stm32mp1-3", + "phytec,phycore-stm32mp157c-som", "st,stm32mp157"; + + aliases { + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + mmc2 = &sdmmc3; + serial0 = &uart4; + serial1 = &usart3; + serial2 = &usart1; + }; +}; + +&cryp1 { + status = "okay"; +}; + +&dts { + status = "okay"; +}; + +&fmc { + status = "disabled"; +}; + +&gpu { + status = "okay"; +}; + +&i2c4_eeprom { + status = "okay"; +}; + +&i2c4_rtc { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&sdmmc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi new file mode 100644 index 000000000000..4e8b2d2b30c7 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi @@ -0,0 +1,577 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2022-2023 Steffen Trumtrar <kernel@pengutronix.de> + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved + * Author: Dom VOVARD <dom.vovard@linrt.com>. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/mfd/st,stpmic1.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "stm32mp15-pinctrl.dtsi" + +/ { + model = "PHYTEC phyCORE-STM32MP15 SOM"; + compatible = "phytec,phycore-stm32mp157c-som", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + rtc0 = &i2c4_rtc; + rtc1 = &rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-home { + label = "Home"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + key-enter { + label = "Enter"; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-PHYCORE"; + routing = + "Playback", "MCLK", /* Set a route between "MCLK" and "playback" widgets */ + "Capture", "MCLK"; + dais = <&sai2b_port>, + <&sai2a_port>; + }; + + regulator_vin: regulator { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +ðernet0 { + pinctrl-0 = <ðernet0_rgmii_pins_d>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_d>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + st,eth-clk-sel; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpiog>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + enet-phy-lane-no-swap; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_b>; + pinctrl-1 = <&i2c1_sleep_pins_b>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + + codec@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + #sound-dai-cells = <0>; + + ai3x-micbias-vg = <2>; + + AVDD-supply = <&v3v3>; + IOVDD-supply = <&v3v3>; + DRVDD-supply = <&v3v3>; + DVDD-supply = <&v1v8_audio>; + + clocks = <&sai2b>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tlv320_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + + tlv320_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; + + touch@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + vio-supply = <&v3v3>; + vcc-supply = <&v3v3>; + + touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + + leds@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + type = <PCA9532_TYPE_LED>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + type = <PCA9532_TYPE_LED>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + type = <PCA9532_TYPE_LED>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + compatible = "st,stpmic1-regulators"; + buck1-supply = <®ulator_vin>; + buck2-supply = <®ulator_vin>; + buck3-supply = <®ulator_vin>; + buck4-supply = <®ulator_vin>; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo4-supply = <®ulator_vin>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + boost-supply = <®ulator_vin>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + + }; + + vdd_eth_2v5: ldo2 { + regulator-name = "dd_eth_2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + vdd_eth_1v0: ldo6 { + regulator-name = "vdd_eth_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + regulator-active-discharge = <1>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, + <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", + "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + }; + + i2c4_eeprom: eeprom@50 { + compatible = "microchip,24c32", + "atmel,24c32"; + reg = <0x50>; + }; + + i2c4_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m_can2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + status = "okay"; + + flash0: flash@0 { + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + m25p,fast-read; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_b>, <&sai2b_pins_d>; + pinctrl-1 = <&sai2a_sleep_pins_b>, <&sai2b_sleep_pins_d>; + status = "okay"; +}; + +&sai2a { + dma-names = "rx"; + st,sync = <&sai2b 2>; + clocks = <&rcc SAI2_K>, <&sai2b>; + clock-names = "sai_ck", "MCLK"; + #clock-cells = <0>; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&tlv320_rx_endpoint>; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; +}; + +&sai2b { + dma-names = "tx"; + #clock-cells = <0>; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&tlv320_tx_endpoint>; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_b>; + pinctrl-1 = <&sdmmc1_b4_od_pins_b>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_b>; + cd-gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_e>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_e>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_e>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; +}; + +&spi1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_pins_a>; + pinctrl-1 = <&spi1_sleep_pins_a>; + cs-gpios = <&gpioz 3 0>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + pinctrl-3 = <&uart4_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usart1 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_b &usart1_pins_a>; + pinctrl-1 = <&usart1_sleep_pins_b &usart1_sleep_pins_a>; + pinctrl-2 = <&usart1_idle_pins_b &usart1_idle_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&usart3 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart3_pins_a>; + pinctrl-1 = <&usart3_sleep_pins_a>; + pinctrl-2 = <&usart3_idle_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 4709677151aa..46b87a27d8b3 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -137,10 +137,13 @@ sound { compatible = "audio-graph-card"; - routing = - "MIC_IN", "Capture", - "Capture", "Mic Bias", - "Playback", "HP_OUT"; + widgets = "Headphone", "Headphone Jack", + "Line", "Line In Jack", + "Microphone", "Microphone Jack"; + routing = "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias"; dais = <&sai2a_port &sai2b_port>; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index c06edd2eacb0..e61df23d361a 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -80,17 +80,19 @@ vdda-supply = <&vdda>; vref-supply = <&vdda>; status = "okay"; +}; - adc1: adc@0 { - st,min-sample-time-nsecs = <5000>; - st,adc-channels = <0>; - status = "okay"; +&adc1 { + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; }; +}; - adc2: adc@100 { - st,adc-channels = <1>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; +&adc2 { + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; }; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 50af4a27d6be..0069ad75d55e 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -87,7 +87,7 @@ sound { compatible = "audio-graph-card"; - label = "STM32MP1-AV96-HDMI"; + label = "STM32-AV96-HDMI"; dais = <&sai2a_port>; status = "okay"; }; @@ -111,17 +111,39 @@ vdda-supply = <&vdda>; vref-supply = <&vdda>; status = "okay"; +}; - adc1: adc@0 { - st,adc-channels = <0 1 6>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; +&adc1 { + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; }; - adc2: adc@100 { - st,adc-channels = <0 1 2>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; +}; + +&adc2 { + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; }; }; @@ -321,6 +343,12 @@ }; }; }; + + dh_mac_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; }; <dc { @@ -330,11 +358,7 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&adv7513_in>; }; }; @@ -452,7 +476,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&usart2_pins_a>; pinctrl-1 = <&usart2_sleep_pins_a>; - st,hw-flow-ctrl; + uart-has-rtscts; /delete-property/dmas; /delete-property/dma-names; status = "okay"; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi index c32c160f97f2..92d906bfd5d7 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi @@ -57,15 +57,35 @@ status = "okay"; adc1: adc@0 { - st,adc-channels = <0 1 6>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; }; adc2: adc@100 { - st,adc-channels = <0 1 2>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + }; }; }; @@ -192,6 +212,12 @@ reg = <0x50>; pagesize = <16>; }; + + dh_mac_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; }; &sdmmc1 { /* MicroSD */ diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index bb40fb46da81..bba19f21e527 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -213,12 +213,6 @@ status = "disabled"; }; }; - - eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; }; &ipcc { diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi index 5fdb74b652ac..ab7f0ba49639 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi @@ -41,15 +41,35 @@ status = "okay"; adc1: adc@0 { - st,adc-channels = <0 1 6>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + }; }; adc2: adc@100 { - st,adc-channels = <0 1 2>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + channel@0 { + reg = <0>; + st,min-sample-time-ns = <5000>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + }; + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + }; }; }; @@ -90,6 +110,14 @@ }; }; +&i2c4 { + dh_mac_eeprom: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index cefeeb00fc22..511113f2e399 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -93,28 +93,39 @@ &adc { pinctrl-names = "default"; - pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + pinctrl-0 = <&adc12_usb_cc_pins_a>; vdd-supply = <&vdd>; vdda-supply = <&vdd>; vref-supply = <&vrefbuf>; - status = "disabled"; + status = "okay"; adc1: adc@0 { + status = "okay"; /* * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: * 5 * (56 + 47kOhms) * 5pF => 2.5us. * Use arbitrary margin here (e.g. 5us). */ - st,min-sample-time-nsecs = <5000>; - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 6 13 18 19>; - status = "okay"; + channel@18 { + reg = <18>; + st,min-sample-time-ns = <5000>; + }; + channel@19 { + reg = <19>; + st,min-sample-time-ns = <5000>; + }; }; adc2: adc@100 { - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 2 6 18 19>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + /* USB Type-C CC1 & CC2 */ + channel@18 { + reg = <18>; + st,min-sample-time-ns = <5000>; + }; + channel@19 { + reg = <19>; + st,min-sample-time-ns = <5000>; + }; }; }; @@ -379,21 +390,21 @@ regulator-always-on; }; - bst_out: boost { + bst_out: boost { regulator-name = "bst_out"; interrupts = <IT_OCP_BOOST 0>; - }; + }; vbus_otg: pwr_sw1 { regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; - }; + }; - vbus_sw: pwr_sw2 { + vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; regulator-active-discharge = <1>; - }; + }; }; onkey { @@ -435,7 +446,7 @@ i2s2_port: port { i2s2_endpoint: endpoint { remote-endpoint = <&sii9022_tx_endpoint>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; }; }; @@ -457,8 +468,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&sii9022_in>; }; }; |