diff options
| -rw-r--r-- | drivers/net/phy/phy.c | 21 | ||||
| -rw-r--r-- | include/linux/phy.h | 28 |
2 files changed, 49 insertions, 0 deletions
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 0d20b534122b..f42cd6584841 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1006,6 +1006,27 @@ static int phy_check_link_status(struct phy_device *phydev) } /** + * phy_inband_caps - query which in-band signalling modes are supported + * @phydev: a pointer to a &struct phy_device + * @interface: the interface mode for the PHY + * + * Returns zero if it is unknown what in-band signalling is supported by the + * PHY (e.g. because the PHY driver doesn't implement the method.) Otherwise, + * returns a bit mask of the LINK_INBAND_* values from + * &enum link_inband_signalling to describe which inband modes are supported + * by the PHY for this interface mode. + */ +unsigned int phy_inband_caps(struct phy_device *phydev, + phy_interface_t interface) +{ + if (phydev->drv && phydev->drv->inband_caps) + return phydev->drv->inband_caps(phydev, interface); + + return 0; +} +EXPORT_SYMBOL_GPL(phy_inband_caps); + +/** * _phy_start_aneg - start auto-negotiation for this PHY device * @phydev: the phy_device struct * diff --git a/include/linux/phy.h b/include/linux/phy.h index 563c46205685..ccb93d892da9 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -818,6 +818,24 @@ struct phy_tdr_config { #define PHY_PAIR_ALL -1 /** + * enum link_inband_signalling - in-band signalling modes that are supported + * + * @LINK_INBAND_DISABLE: in-band signalling can be disabled + * @LINK_INBAND_ENABLE: in-band signalling can be enabled without bypass + * @LINK_INBAND_BYPASS: in-band signalling can be enabled with bypass + * + * The possible and required bits can only be used if the valid bit is set. + * If possible is clear, that means inband signalling can not be used. + * Required is only valid when possible is set, and means that inband + * signalling must be used. + */ +enum link_inband_signalling { + LINK_INBAND_DISABLE = BIT(0), + LINK_INBAND_ENABLE = BIT(1), + LINK_INBAND_BYPASS = BIT(2), +}; + +/** * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision * Avoidance) Reconciliation Sublayer. * @@ -957,6 +975,14 @@ struct phy_driver { int (*get_features)(struct phy_device *phydev); /** + * @inband_caps: query whether in-band is supported for the given PHY + * interface mode. Returns a bitmask of bits defined by enum + * link_inband_signalling. + */ + unsigned int (*inband_caps)(struct phy_device *phydev, + phy_interface_t interface); + + /** * @get_rate_matching: Get the supported type of rate matching for a * particular phy interface. This is used by phy consumers to determine * whether to advertise lower-speed modes for that interface. It is @@ -1818,6 +1844,8 @@ int phy_config_aneg(struct phy_device *phydev); int _phy_start_aneg(struct phy_device *phydev); int phy_start_aneg(struct phy_device *phydev); int phy_aneg_done(struct phy_device *phydev); +unsigned int phy_inband_caps(struct phy_device *phydev, + phy_interface_t interface); int phy_speed_down(struct phy_device *phydev, bool sync); int phy_speed_up(struct phy_device *phydev); bool phy_check_valid(int speed, int duplex, unsigned long *features); |