diff options
Diffstat (limited to 'Documentation/ABI')
35 files changed, 1170 insertions, 34 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd index b5bebf642db6..1af9c4175213 100644 --- a/Documentation/ABI/stable/sysfs-driver-dma-idxd +++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd @@ -1,47 +1,47 @@ -What: sys/bus/dsa/devices/dsa<m>/version +What: /sys/bus/dsa/devices/dsa<m>/version Date: Apr 15, 2020 KernelVersion: 5.8.0 Contact: dmaengine@vger.kernel.org Description: The hardware version number. -What: sys/bus/dsa/devices/dsa<m>/cdev_major +What: /sys/bus/dsa/devices/dsa<m>/cdev_major Date: Oct 25, 2019 -KernelVersion: 5.6.0 +KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The major number that the character device driver assigned to this device. -What: sys/bus/dsa/devices/dsa<m>/errors +What: /sys/bus/dsa/devices/dsa<m>/errors Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The error information for this device. -What: sys/bus/dsa/devices/dsa<m>/max_batch_size +What: /sys/bus/dsa/devices/dsa<m>/max_batch_size Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The largest number of work descriptors in a batch. -What: sys/bus/dsa/devices/dsa<m>/max_work_queues_size +What: /sys/bus/dsa/devices/dsa<m>/max_work_queues_size Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The maximum work queue size supported by this device. -What: sys/bus/dsa/devices/dsa<m>/max_engines +What: /sys/bus/dsa/devices/dsa<m>/max_engines Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The maximum number of engines supported by this device. -What: sys/bus/dsa/devices/dsa<m>/max_groups +What: /sys/bus/dsa/devices/dsa<m>/max_groups Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The maximum number of groups can be created under this device. -What: sys/bus/dsa/devices/dsa<m>/max_tokens +What: /sys/bus/dsa/devices/dsa<m>/max_tokens Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org @@ -50,7 +50,7 @@ Description: The total number of bandwidth tokens supported by this device. implementation, and these resources are allocated by engines to support operations. -What: sys/bus/dsa/devices/dsa<m>/max_transfer_size +What: /sys/bus/dsa/devices/dsa<m>/max_transfer_size Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org @@ -58,57 +58,57 @@ Description: The number of bytes to be read from the source address to perform the operation. The maximum transfer size is dependent on the workqueue the descriptor was submitted to. -What: sys/bus/dsa/devices/dsa<m>/max_work_queues +What: /sys/bus/dsa/devices/dsa<m>/max_work_queues Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The maximum work queue number that this device supports. -What: sys/bus/dsa/devices/dsa<m>/numa_node +What: /sys/bus/dsa/devices/dsa<m>/numa_node Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The numa node number for this device. -What: sys/bus/dsa/devices/dsa<m>/op_cap +What: /sys/bus/dsa/devices/dsa<m>/op_cap Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The operation capability bit mask specify the operation types supported by the this device. -What: sys/bus/dsa/devices/dsa<m>/state +What: /sys/bus/dsa/devices/dsa<m>/state Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The state information of this device. It can be either enabled or disabled. -What: sys/bus/dsa/devices/dsa<m>/group<m>.<n> +What: /sys/bus/dsa/devices/dsa<m>/group<m>.<n> Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The assigned group under this device. -What: sys/bus/dsa/devices/dsa<m>/engine<m>.<n> +What: /sys/bus/dsa/devices/dsa<m>/engine<m>.<n> Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The assigned engine under this device. -What: sys/bus/dsa/devices/dsa<m>/wq<m>.<n> +What: /sys/bus/dsa/devices/dsa<m>/wq<m>.<n> Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The assigned work queue under this device. -What: sys/bus/dsa/devices/dsa<m>/configurable +What: /sys/bus/dsa/devices/dsa<m>/configurable Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: To indicate if this device is configurable or not. -What: sys/bus/dsa/devices/dsa<m>/token_limit +What: /sys/bus/dsa/devices/dsa<m>/token_limit Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org @@ -116,19 +116,19 @@ Description: The maximum number of bandwidth tokens that may be in use at one time by operations that access low bandwidth memory in the device. -What: sys/bus/dsa/devices/wq<m>.<n>/group_id +What: /sys/bus/dsa/devices/wq<m>.<n>/group_id Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The group id that this work queue belongs to. -What: sys/bus/dsa/devices/wq<m>.<n>/size +What: /sys/bus/dsa/devices/wq<m>.<n>/size Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The work queue size for this work queue. -What: sys/bus/dsa/devices/wq<m>.<n>/type +What: /sys/bus/dsa/devices/wq<m>.<n>/type Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org @@ -136,20 +136,20 @@ Description: The type of this work queue, it can be "kernel" type for work queue usages in the kernel space or "user" type for work queue usages by applications in user space. -What: sys/bus/dsa/devices/wq<m>.<n>/cdev_minor +What: /sys/bus/dsa/devices/wq<m>.<n>/cdev_minor Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The minor number assigned to this work queue by the character device driver. -What: sys/bus/dsa/devices/wq<m>.<n>/mode +What: /sys/bus/dsa/devices/wq<m>.<n>/mode Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The work queue mode type for this work queue. -What: sys/bus/dsa/devices/wq<m>.<n>/priority +What: /sys/bus/dsa/devices/wq<m>.<n>/priority Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org @@ -157,20 +157,20 @@ Description: The priority value of this work queue, it is a vlue relative to other work queue in the same group to control quality of service for dispatching work from multiple workqueues in the same group. -What: sys/bus/dsa/devices/wq<m>.<n>/state +What: /sys/bus/dsa/devices/wq<m>.<n>/state Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The current state of the work queue. -What: sys/bus/dsa/devices/wq<m>.<n>/threshold +What: /sys/bus/dsa/devices/wq<m>.<n>/threshold Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The number of entries in this work queue that may be filled via a limited portal. -What: sys/bus/dsa/devices/engine<m>.<n>/group_id +What: /sys/bus/dsa/devices/engine<m>.<n>/group_id Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index b0d90cc696a8..fd9a8045bb0c 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -206,3 +206,20 @@ Description: This file exposes the firmware version of burnable voltage regulator devices. The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min +Date: July 2020 +KernelVersion: 5.9 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD part numbers and minor + versions have been burned CPLD devices equipped on a + system. + + The files are read only. diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup new file mode 100644 index 000000000000..c6a32c434ce9 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-speakup @@ -0,0 +1,375 @@ +What: /sys/accessibility/speakup/attrib_bleep +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Beeps the PC speaker when there is an attribute change such as + foreground or background color when using speakup review + commands. One = on, zero = off. + +What: /sys/accessibility/speakup/bell_pos +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This works much like a typewriter bell. If for example 72 is + echoed to bell_pos, it will beep the PC speaker when typing on + a line past character 72. + +What: /sys/accessibility/speakup/bleeps +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This controls whether one hears beeps through the PC speaker + when using speakup's review commands. + TODO: what values does it accept? + +What: /sys/accessibility/speakup/bleep_time +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This controls the duration of the PC speaker beeps speakup + produces. + TODO: What are the units? Jiffies? + +What: /sys/accessibility/speakup/cursor_time +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This controls cursor delay when using arrow keys. When a + connection is very slow, with the default setting, when moving + with the arrows, or backspacing etc. speakup says the incorrect + characters. Set this to a higher value to adjust for the delay + and better synchronisation between cursor position and speech. + +What: /sys/accessibility/speakup/delimiters +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Delimit a word from speakup. + TODO: add more info + +What: /sys/accessibility/speakup/ex_num +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: TODO: + +What: /sys/accessibility/speakup/key_echo +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Controls if speakup speaks keys when they are typed. One = on, + zero = off or don't echo keys. + +What: /sys/accessibility/speakup/keymap +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Speakup keymap remaps keys to Speakup functions. + It uses a binary + format. A special program called genmap is needed to compile a + textual keymap into the binary format which is then loaded into + /sys/accessibility/speakup/keymap. + +What: /sys/accessibility/speakup/no_interrupt +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Controls if typing interrupts output from speakup. With + no_interrupt set to zero, typing on the keyboard will interrupt + speakup if for example + the say screen command is used before the + entire screen is read. + With no_interrupt set to one, if the say + screen command is used, and one then types on the keyboard, + speakup will continue to say the whole screen regardless until + it finishes. + +What: /sys/accessibility/speakup/punc_all +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This is a list of all the punctuation speakup should speak when + punc_level is set to four. + +What: /sys/accessibility/speakup/punc_level +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Controls the level of punctuation spoken as the screen is + displayed, not reviewed. Levels range from zero no punctuation, + to four, all punctuation. One corresponds to punc_some, two + corresponds to punc_most, and three as well as four both + correspond to punc_all. Some hardware synthesizers may have + different levels each corresponding to three and four for + punc_level. Also note that if punc_level is set to zero, and + key_echo is set to one, typed punctuation is still spoken as it + is typed. + +What: /sys/accessibility/speakup/punc_most +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This is a list of all the punctuation speakup should speak when + punc_level is set to two. + +What: /sys/accessibility/speakup/punc_some +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This is a list of all the punctuation speakup should speak when + punc_level is set to one. + +What: /sys/accessibility/speakup/reading_punc +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Almost the same as punc_level, the differences being that + reading_punc controls the level of punctuation when reviewing + the screen with speakup's screen review commands. The other + difference is that reading_punc set to three speaks punc_all, + and reading_punc set to four speaks all punctuation, including + spaces. + +What: /sys/accessibility/speakup/repeats +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: A list of characters speakup repeats. Normally, when there are + more than three characters in a row, speakup + just reads three of + those characters. For example, "......" would be read as dot, + dot, dot. If a . is added to the list of characters in repeats, + "......" would be read as dot, dot, dot, times six. + +What: /sys/accessibility/speakup/say_control +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: If set to one, speakup speaks shift, alt and control when those + keys are pressed. If say_control is set to zero, shift, ctrl, + and alt are not spoken when they are pressed. + +What: /sys/accessibility/speakup/say_word_ctl +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: TODO: + +What: /sys/accessibility/speakup/silent +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: TODO: + +What: /sys/accessibility/speakup/spell_delay +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This controls how fast a word is spelled + when speakup's say word + review command is pressed twice quickly to speak the current + word being reviewed. Zero just speaks the letters one after + another, while values one through four + seem to introduce more of + a pause between the spelling of each letter by speakup. + +What: /sys/accessibility/speakup/synth +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Gets or sets the synthesizer driver currently in use. Reading + synth returns the synthesizer driver currently in use. Writing + synth switches to the given synthesizer driver, provided it is + either built into the kernel, or already loaded as a module. + +What: /sys/accessibility/speakup/synth_direct +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Sends whatever is written to synth_direct + directly to the speech synthesizer in use, bypassing speakup. + This could be used to make the synthesizer speak + a string, or to + send control sequences to the synthesizer to change how the + synthesizer behaves. + +What: /sys/accessibility/speakup/version +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Reading version returns the version of speakup, and the version + of the synthesizer driver currently in use. + +What: /sys/accessibility/speakup/i18n/announcements +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This file contains various general announcements, most of which + cannot be categorized. You will find messages such as "You + killed Speakup", "I'm alive", "leaving help", "parked", + "unparked", and others. You will also find the names of the + screen edges and cursor tracking modes here. + +What: /sys/accessibility/speakup/i18n/chartab +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: TODO + +What: /sys/accessibility/speakup/i18n/ctl_keys +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Here, you will find names of control keys. These are used with + Speakup's say_control feature. + +What: /sys/accessibility/speakup/i18n/function_names +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Here, you will find a list of names for Speakup functions. + These are used by the help system. For example, suppose that + you have activated help mode, and you pressed + keypad 3. Speakup + says: "keypad 3 is character, say next." + The message "character, say next" names a Speakup function, and + it comes from this function_names file. + +What: /sys/accessibility/speakup/i18n/states +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This file contains names for key states. + Again, these are part of the help system. For instance, if you + had pressed speakup + keypad 3, you would hear: + "speakup keypad 3 is go to bottom edge." + The speakup key is depressed, so the name of the key state is + speakup. + This part of the message comes from the states collection. + +What: /sys/accessibility/speakup/i18n/characters +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Through this sys entry, Speakup gives you the ability to change + how Speakup pronounces a given character. You could, for + example, change how some punctuation characters are spoken. You + can even change how Speakup will pronounce certain letters. For + further details see '12. Changing the Pronunciation of + Characters' in Speakup User's Guide (file spkguide.txt in + source). + +What: /sys/accessibility/speakup/i18n/colors +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: When you use the "say attributes" function, Speakup says the + name of the foreground and background colors. These names come + from the i18n/colors file. + +What: /sys/accessibility/speakup/i18n/formatted +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This group of messages contains embedded formatting codes, to + specify the type and width of displayed data. If you change + these, you must preserve all of the formatting codes, and they + must appear in the order used by the default messages. + +What: /sys/accessibility/speakup/i18n/key_names +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Again, key_names is used by Speakup's help system. In the + previous example, Speakup said that you pressed "keypad 3." + This name came from the key_names file. + +What: /sys/accessibility/speakup/<synth-name>/ +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: In `/sys/accessibility/speakup` is a directory corresponding to + the synthesizer driver currently in use (E.G) `soft` for the + soft driver. This directory contains files which control the + speech synthesizer itself, + as opposed to controlling the speakup + screen reader. The parameters in this directory have the same + names and functions across all + supported synthesizers. The range + of values for freq, pitch, rate, and vol is the same for all + supported synthesizers, with the given range being internally + mapped by the driver to more or less fit the range of values + supported for a given parameter by the individual synthesizer. + Below is a description of values and parameters for soft + synthesizer, which is currently the most commonly used. + +What: /sys/accessibility/speakup/soft/caps_start +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This is the string that is sent to the synthesizer to cause it + to start speaking uppercase letters. For the soft synthesizer + and most others, this causes the pitch of the voice to rise + above the currently set pitch. + +What: /sys/accessibility/speakup/soft/caps_stop +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This is the string sent to the synthesizer to cause it to stop + speaking uppercase letters. In the case of the soft synthesizer + and most others, this returns the pitch of the voice + down to the + currently set pitch. + +What: /sys/accessibility/speakup/soft/delay_time +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: TODO: + +What: /sys/accessibility/speakup/soft/direct +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Controls if punctuation is spoken by speakup, or by the + synthesizer. + For example, speakup speaks ">" as "greater", while + the espeak synthesizer used by the soft driver speaks "greater + than". Zero lets speakup speak the punctuation. One lets the + synthesizer itself speak punctuation. + +What: /sys/accessibility/speakup/soft/freq +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Gets or sets the frequency of the speech synthesizer. Range is + 0-9. + +What: /sys/accessibility/speakup/soft/full_time +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: TODO: + +What: /sys/accessibility/speakup/soft/jiffy_delta +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: This controls how many jiffys the kernel gives to the + synthesizer. Setting this too high can make a system unstable, + or even crash it. + +What: /sys/accessibility/speakup/soft/pitch +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Gets or sets the pitch of the synthesizer. The range is 0-9. + +What: /sys/accessibility/speakup/soft/inflection +KernelVersion: 5.8 +Contact: speakup@linux-speakup.org +Description: Gets or sets the inflection of the synthesizer, i.e. the pitch + range. The range is 0-9. + +What: /sys/accessibility/speakup/soft/punct +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Gets or sets the amount of punctuation spoken by the + synthesizer. The range for the soft driver seems to be 0-2. + TODO: How is this related to speakup's punc_level, or + reading_punc. + +What: /sys/accessibility/speakup/soft/rate +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Gets or sets the rate of the synthesizer. Range is from zero + slowest, to nine fastest. + +What: /sys/accessibility/speakup/soft/tone +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Gets or sets the tone of the speech synthesizer. The range for + the soft driver seems to be 0-2. This seems to make no + difference if using espeak and the espeakup connector. + TODO: does espeakup support different tonalities? + +What: /sys/accessibility/speakup/soft/trigger_time +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: TODO: + +What: /sys/accessibility/speakup/soft/voice +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Gets or sets the voice used by the synthesizer if the + synthesizer can speak in more than one voice. The range for the + soft driver is 0-7. Note that while espeak supports multiple + voices, this parameter will not set the voice when the espeakup + connector is used between speakup and espeak. + +What: /sys/accessibility/speakup/soft/vol +KernelVersion: 2.6 +Contact: speakup@linux-speakup.org +Description: Gets or sets the volume of the speech synthesizer. Range is 0-9, + with zero being the softest, and nine being the loudest. + diff --git a/Documentation/ABI/testing/debugfs-turris-mox-rwtm b/Documentation/ABI/testing/debugfs-turris-mox-rwtm new file mode 100644 index 000000000000..2b3255ee68fd --- /dev/null +++ b/Documentation/ABI/testing/debugfs-turris-mox-rwtm @@ -0,0 +1,9 @@ +What: /sys/kernel/debug/turris-mox-rwtm/do_sign +Date: Jun 2020 +KernelVersion: 5.8 +Contact: Marek Behún <marek.behun@nic.cz> +Description: (W) Message to sign with the ECDSA private key stored in + device's OTP. The message must be exactly 64 bytes (since + this is intended for SHA-512 hashes). + (R) The resulting signature, 136 bytes. This contains the R and + S values of the ECDSA signature, both in big-endian format. diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg index f307506eb54c..3c0bb76e3417 100644 --- a/Documentation/ABI/testing/dev-kmsg +++ b/Documentation/ABI/testing/dev-kmsg @@ -56,6 +56,17 @@ Description: The /dev/kmsg character device node provides userspace access seek after the last record available at the time the last SYSLOG_ACTION_CLEAR was issued. + Other seek operations or offsets are not supported because of + the special behavior this device has. The device allows to read + or write only whole variable length messages (records) that are + stored in a ring buffer. + + Because of the non-standard behavior also the error values are + non-standard. -ESPIPE is returned for non-zero offset. -EINVAL + is returned for other operations, e.g. SEEK_CUR. This behavior + and values are historical and could not be modified without the + risk of breaking userspace. + The output format consists of a prefix carrying the syslog prefix including priority and facility, the 64 bit message sequence number and the monotonic timestamp in microseconds, diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index ed8c14f161ee..2322eb748b38 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -273,6 +273,24 @@ Description: device ("host-aware" or "host-managed" zone model). For regular block devices, the value is always 0. +What: /sys/block/<disk>/queue/max_active_zones +Date: July 2020 +Contact: Niklas Cassel <niklas.cassel@wdc.com> +Description: + For zoned block devices (zoned attribute indicating + "host-managed" or "host-aware"), the sum of zones belonging to + any of the zone states: EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, + is limited by this value. If this value is 0, there is no limit. + +What: /sys/block/<disk>/queue/max_open_zones +Date: July 2020 +Contact: Niklas Cassel <niklas.cassel@wdc.com> +Description: + For zoned block devices (zoned attribute indicating + "host-managed" or "host-aware"), the sum of zones belonging to + any of the zone states: EXPLICIT OPEN or IMPLICIT OPEN, + is limited by this value. If this value is 0, there is no limit. + What: /sys/block/<disk>/queue/chunk_sectors Date: September 2016 Contact: Hannes Reinecke <hare@suse.com> diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index e8698afcd952..f7e32f218f73 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 @@ -43,6 +43,13 @@ Description: read only This sysfs interface exposes the number of cores per chip present in the system. +What: /sys/devices/hv_24x7/interface/cpumask +Date: July 2020 +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> +Description: read only + This sysfs file exposes the cpumask which is designated to make + HCALLs to retrieve hv-24x7 pmu event counter data. + What: /sys/bus/event_source/devices/hv_24x7/event_descs/<event-name> Date: February 2014 Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index d3e53a6d8331..5c62bfb0f3f5 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1569,7 +1569,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw KernelVersion: 4.3 Contact: linux-iio@vger.kernel.org Description: - Raw (unscaled no offset etc.) percentage reading of a substance. + Raw (unscaled no offset etc.) reading of a substance. Units + after application of scale and offset are percents. What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw What: /sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw diff --git a/Documentation/ABI/testing/sysfs-bus-iio-icm42600 b/Documentation/ABI/testing/sysfs-bus-iio-icm42600 new file mode 100644 index 000000000000..0bf1fd4f5bf1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-icm42600 @@ -0,0 +1,20 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Hardware applied calibration offset (assumed to fix production + inaccuracies). Values represent a real physical offset expressed + in SI units (m/s^2 for accelerometer and rad/s for gyroscope). + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Range of available values for hardware offset. Values in SI + units (m/s^2 for accelerometer and rad/s for gyroscope). diff --git a/Documentation/ABI/testing/sysfs-bus-iio-scd30 b/Documentation/ABI/testing/sysfs-bus-iio-scd30 new file mode 100644 index 000000000000..b9712f390bec --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-scd30 @@ -0,0 +1,34 @@ +What: /sys/bus/iio/devices/iio:deviceX/calibration_auto_enable +Date: June 2020 +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Contaminants build-up in the measurement chamber or optical + elements deterioration leads to sensor drift. + + One can compensate for sensor drift by using automatic self + calibration procedure (asc). + + Writing 1 or 0 to this attribute will respectively activate or + deactivate asc. + + Upon reading current asc status is returned. + +What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value +Date: June 2020 +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Contaminants build-up in the measurement chamber or optical + elements deterioration leads to sensor drift. + + One can compensate for sensor drift by using forced + recalibration (frc). This is useful in case there's known + co2 reference available nearby the sensor. + + Picking value from the range [400 1 2000] and writing it to the + sensor will set frc. + + Upon reading current frc value is returned. Note that after + power cycling default value (i.e 400) is returned even though + internally sensor had recalibrated itself. diff --git a/Documentation/ABI/testing/sysfs-bus-nfit b/Documentation/ABI/testing/sysfs-bus-nfit index a1cb44dcb908..e4f76e7eab93 100644 --- a/Documentation/ABI/testing/sysfs-bus-nfit +++ b/Documentation/ABI/testing/sysfs-bus-nfit @@ -202,6 +202,25 @@ Description: functions. See the section named 'NVDIMM Root Device _DSMs' in the ACPI specification. +What: /sys/bus/nd/devices/ndbusX/nfit/firmware_activate_noidle +Date: Apr, 2020 +KernelVersion: v5.8 +Contact: linux-nvdimm@lists.01.org +Description: + (RW) The Intel platform implementation of firmware activate + support exposes an option let the platform force idle devices in + the system over the activation event, or trust that the OS will + do it. The safe default is to let the platform force idle + devices since the kernel is already in a suspend state, and on + the chance that a driver does not properly quiesce bus-mastering + after a suspend callback the platform will handle it. However, + the activation might abort if, for example, platform firmware + determines that the activation time exceeds the max PCI-E + completion timeout. Since the platform does not know whether the + OS is running the activation from a suspend context it aborts, + but if the system owner trusts driver suspend callback to be + sufficient then 'firmware_activation_noidle' can be + enabled to bypass the activation abort. What: /sys/bus/nd/devices/regionX/nfit/range_index Date: Jun, 2015 diff --git a/Documentation/ABI/testing/sysfs-bus-nvdimm b/Documentation/ABI/testing/sysfs-bus-nvdimm new file mode 100644 index 000000000000..d64380262be8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-nvdimm @@ -0,0 +1,2 @@ +The libnvdimm sub-system implements a common sysfs interface for +platform nvdimm resources. See Documentation/driver-api/nvdimm/. diff --git a/Documentation/ABI/testing/sysfs-bus-optee-devices b/Documentation/ABI/testing/sysfs-bus-optee-devices new file mode 100644 index 000000000000..0f58701367b6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-optee-devices @@ -0,0 +1,8 @@ +What: /sys/bus/tee/devices/optee-ta-<uuid>/ +Date: May 2020 +KernelVersion 5.8 +Contact: op-tee@lists.trustedfirmware.org +Description: + OP-TEE bus provides reference to registered drivers under this directory. The <uuid> + matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers + are free to create needed API under optee-ta-<uuid> directory. diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem index 5b10d036a8d4..c1a67275c43f 100644 --- a/Documentation/ABI/testing/sysfs-bus-papr-pmem +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem @@ -25,3 +25,30 @@ Description: NVDIMM have been scrubbed. * "locked" : Indicating that NVDIMM contents cant be modified until next power cycle. + +What: /sys/bus/nd/devices/nmemX/papr/perf_stats +Date: May, 2020 +KernelVersion: v5.9 +Contact: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org, +Description: + (RO) Report various performance stats related to papr-scm NVDIMM + device. Each stat is reported on a new line with each line + composed of a stat-identifier followed by it value. Below are + currently known dimm performance stats which are reported: + + * "CtlResCt" : Controller Reset Count + * "CtlResTm" : Controller Reset Elapsed Time + * "PonSecs " : Power-on Seconds + * "MemLife " : Life Remaining + * "CritRscU" : Critical Resource Utilization + * "HostLCnt" : Host Load Count + * "HostSCnt" : Host Store Count + * "HostSDur" : Host Store Duration + * "HostLDur" : Host Load Duration + * "MedRCnt " : Media Read Count + * "MedWCnt " : Media Write Count + * "MedRDur " : Media Read Duration + * "MedWDur " : Media Write Duration + * "CchRHCnt" : Cache Read Hit Count + * "CchWHCnt" : Cache Write Hit Count + * "FastWCnt" : Fast Write Count
\ No newline at end of file diff --git a/Documentation/ABI/testing/sysfs-bus-platform b/Documentation/ABI/testing/sysfs-bus-platform index 5172a6124b27..194ca700e962 100644 --- a/Documentation/ABI/testing/sysfs-bus-platform +++ b/Documentation/ABI/testing/sysfs-bus-platform @@ -18,3 +18,13 @@ Description: devices to opt-out of driver binding using a driver_override name such as "none". Only a single driver may be specified in the override, there is no support for parsing delimiters. + +What: /sys/bus/platform/devices/.../numa_node +Date: June 2020 +Contact: Barry Song <song.bao.hua@hisilicon.com> +Description: + This file contains the NUMA node to which the platform device + is attached. It won't be visible if the node is unknown. The + value comes from an ACPI _PXM method or a similar firmware + source. Initial users for this file would be devices like + arm smmu which are populated by arm64 acpi_iort. diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 82e80de78dd0..dd565c378b40 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -178,11 +178,18 @@ KernelVersion: 4.13 Contact: thunderbolt-software@lists.01.org Description: When new NVM image is written to the non-active NVM area (through non_activeX NVMem device), the - authentication procedure is started by writing 1 to - this file. If everything goes well, the device is + authentication procedure is started by writing to + this file. + If everything goes well, the device is restarted with the new NVM firmware. If the image verification fails an error code is returned instead. + This file will accept writing values "1" or "2" + - Writing "1" will flush the image to the storage + area and authenticate the image in one action. + - Writing "2" will run some basic validation on the image + and flush it to the storage area. + When read holds status of the last authentication operation if an error occurred during the process. This is directly the status value from the DMA configuration @@ -236,3 +243,49 @@ KernelVersion: 4.15 Contact: thunderbolt-software@lists.01.org Description: This contains XDomain service specific settings as bitmask. Format: %x + +What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/device +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mika Westerberg <mika.westerberg@linux.intel.com> +Description: Retimer device identifier read from the hardware. + +What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_authenticate +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mika Westerberg <mika.westerberg@linux.intel.com> +Description: When new NVM image is written to the non-active NVM + area (through non_activeX NVMem device), the + authentication procedure is started by writing 1 to + this file. If everything goes well, the device is + restarted with the new NVM firmware. If the image + verification fails an error code is returned instead. + + When read holds status of the last authentication + operation if an error occurred during the process. + Format: %x. + +What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/nvm_version +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mika Westerberg <mika.westerberg@linux.intel.com> +Description: Holds retimer NVM version number. Format: %x.%x, major.minor. + +What: /sys/bus/thunderbolt/devices/<device>:<port>.<index>/vendor +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mika Westerberg <mika.westerberg@linux.intel.com> +Description: Retimer vendor identifier read from the hardware. + +What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mario Limonciello <mario.limonciello@dell.com> +Description: For supported devices, automatically authenticate the new Thunderbolt + image when the device is disconnected from the host system. + + This file will accept writing values "1" or "2" + - Writing "1" will flush the image to the storage + area and prepare the device for authentication on disconnect. + - Writing "2" will run some basic validation on the image + and flush it to the storage area. diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index 9758eb85ade3..deefffb3bbe4 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -108,3 +108,15 @@ Description: frequency requested by governors and min_freq. The max_freq overrides min_freq because max_freq may be used to throttle devices to avoid overheating. + +What: /sys/class/devfreq/.../timer +Date: July 2020 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + This ABI shows and stores the kind of work timer by users. + This work timer is used by devfreq workqueue in order to + monitor the device status such as utilization. The user + can change the work timer on runtime according to their demand + as following: + echo deferrable > /sys/class/devfreq/.../timer + echo delayed > /sys/class/devfreq/.../timer diff --git a/Documentation/ABI/testing/sysfs-class-devlink b/Documentation/ABI/testing/sysfs-class-devlink new file mode 100644 index 000000000000..64791b65c9a3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-devlink @@ -0,0 +1,126 @@ +What: /sys/class/devlink/.../ +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + Provide a place in sysfs for the device link objects in the + kernel at any given time. The name of a device link directory, + denoted as ... above, is of the form <supplier>--<consumer> + where <supplier> is the supplier device name and <consumer> is + the consumer device name. + +What: /sys/class/devlink/.../auto_remove_on +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file indicates if the device link will ever be + automatically removed by the driver core when the consumer and + supplier devices themselves are still present. + + This will be one of the following strings: + + 'consumer unbind' + 'supplier unbind' + 'never' + + 'consumer unbind' means the device link will be removed when + the consumer's driver is unbound from the consumer device. + + 'supplier unbind' means the device link will be removed when + the supplier's driver is unbound from the supplier device. + + 'never' means the device link will not be automatically removed + when as long as the supplier and consumer devices themselves + are still present. + +What: /sys/class/devlink/.../consumer +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file is a symlink to the consumer device's sysfs directory. + +What: /sys/class/devlink/.../runtime_pm +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file indicates if the device link has any impact on the + runtime power management behavior of the consumer and supplier + devices. For example: Making sure the supplier doesn't enter + runtime suspend while the consumer is active. + + This will be one of the following strings: + + '0' - Does not affect runtime power management + '1' - Affects runtime power management + +What: /sys/class/devlink/.../status +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file indicates the status of the device link. The status + of a device link is affected by whether the supplier and + consumer devices have been bound to their corresponding + drivers. The status of a device link also affects the binding + and unbinding of the supplier and consumer devices with their + drivers and also affects whether the software state of the + supplier device is synced with the hardware state of the + supplier device after boot up. + See also: sysfs-devices-state_synced. + + This will be one of the following strings: + + 'not tracked' + 'dormant' + 'available' + 'consumer probing' + 'active' + 'supplier unbinding' + 'unknown' + + 'not tracked' means this device link does not track the status + and has no impact on the binding, unbinding and syncing the + hardware and software device state. + + 'dormant' means the supplier and the consumer devices have not + bound to their driver. + + 'available' means the supplier has bound to its driver and is + available to supply resources to the consumer device. + + 'consumer probing' means the consumer device is currently + trying to bind to its driver. + + 'active' means the supplier and consumer devices have both + bound successfully to their drivers. + + 'supplier unbinding' means the supplier devices is currently in + the process of unbinding from its driver. + + 'unknown' means the state of the device link is not any of the + above. If this is ever the value, there's a bug in the kernel. + +What: /sys/class/devlink/.../supplier +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file is a symlink to the supplier device's sysfs directory. + +What: /sys/class/devlink/.../sync_state_only +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file indicates if the device link is limited to only + affecting the syncing of the hardware and software state of the + supplier device. + + This will be one of the following strings: + + '0' + '1' - Affects runtime power management + + '0' means the device link can affect other device behaviors + like binding/unbinding, suspend/resume, runtime power + management, etc. + + '1' means the device link will only affect the syncing of + hardware and software state of the supplier device after boot + up and doesn't not affect other behaviors of the devices. diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia b/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia new file mode 100644 index 000000000000..795a5de12fc1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia @@ -0,0 +1,14 @@ +What: /sys/class/leds/<led>/device/brightness +Date: July 2020 +KernelVersion: 5.9 +Contact: Marek Behún <marek.behun@nic.cz> +Description: (RW) On the front panel of the Turris Omnia router there is also + a button which can be used to control the intensity of all the + LEDs at once, so that if they are too bright, user can dim them. + + The microcontroller cycles between 8 levels of this global + brightness (from 100% to 0%), but this setting can have any + integer value between 0 and 100. It is therefore convenient to be + able to change this setting from software. + + Format: %i diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor new file mode 100644 index 000000000000..eeeddcbdbbe3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor @@ -0,0 +1,35 @@ +What: /sys/class/leds/<led>/brightness +Date: March 2020 +KernelVersion: 5.9 +Contact: Dan Murphy <dmurphy@ti.com> +Description: read/write + Writing to this file will update all LEDs within the group to a + calculated percentage of what each color LED intensity is set + to. The percentage is calculated for each grouped LED via the + equation below: + + led_brightness = brightness * multi_intensity/max_brightness + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. + + The value of the LED is from 0 to + /sys/class/leds/<led>/max_brightness. + +What: /sys/class/leds/<led>/multi_index +Date: March 2020 +KernelVersion: 5.9 +Contact: Dan Murphy <dmurphy@ti.com> +Description: read + The multi_index array, when read, will output the LED colors + as an array of strings as they are indexed in the + multi_intensity file. + +What: /sys/class/leds/<led>/multi_intensity +Date: March 2020 +KernelVersion: 5.9 +Contact: Dan Murphy <dmurphy@ti.com> +Description: read/write + This file contains array of integers. Order of components is + described by the multi_index array. The maximum intensity should + not exceed /sys/class/leds/<led>/max_brightness. diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei index e9dc110650ae..5c52372b43cb 100644 --- a/Documentation/ABI/testing/sysfs-class-mei +++ b/Documentation/ABI/testing/sysfs-class-mei @@ -90,3 +90,16 @@ Description: Display trc status register content The ME FW writes Glitch Detection HW (TRC) status information into trc status register for BIOS and OS to monitor fw health. + +What: /sys/class/mei/meiN/kind +Date: Jul 2020 +KernelVersion: 5.8 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Display kind of the device + + Generic devices are marked as "mei" + while special purpose have their own + names. + Available options: + - mei: generic mei device. + - itouch: itouch (ipts) mei device. diff --git a/Documentation/ABI/testing/sysfs-class-ocxl b/Documentation/ABI/testing/sysfs-class-ocxl index b5b1fa197592..ae1276efa45a 100644 --- a/Documentation/ABI/testing/sysfs-class-ocxl +++ b/Documentation/ABI/testing/sysfs-class-ocxl @@ -33,3 +33,14 @@ Date: January 2018 Contact: linuxppc-dev@lists.ozlabs.org Description: read/write Give access the global mmio area for the AFU + +What: /sys/class/ocxl/<afu name>/reload_on_reset +Date: February 2020 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + Control whether the FPGA is reloaded on a link reset. Enabled + through a vendor-specific logic block on the FPGA. + 0 Do not reload FPGA image from flash + 1 Reload FPGA image from flash + unavailable + The device does not support this capability diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index 216d61a22f1e..40213c73bc9c 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -205,7 +205,8 @@ Description: Valid values: "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", "Watchdog timer expire", "Safety timer expire", - "Over current", "Calibration required" + "Over current", "Calibration required", "Warm", + "Cool", "Hot" What: /sys/class/power_supply/<supply_name>/precharge_current Date: June 2017 diff --git a/Documentation/ABI/testing/sysfs-class-power-wilco b/Documentation/ABI/testing/sysfs-class-power-wilco index da1d6ffe5e3c..84fde1d0ada0 100644 --- a/Documentation/ABI/testing/sysfs-class-power-wilco +++ b/Documentation/ABI/testing/sysfs-class-power-wilco @@ -14,6 +14,10 @@ Description: Charging begins when level drops below charge_control_start_threshold, and ceases when level is above charge_control_end_threshold. + Long Life: Customized charge rate for last longer battery life. + On Wilco device this mode is pre-configured in the factory + through EC's private PID. Swiching to a different mode will + be denied by Wilco EC when Long Life mode is enabled. What: /sys/class/power_supply/wilco-charger/charge_control_start_threshold Date: April 2019 diff --git a/Documentation/ABI/testing/sysfs-devices-consumer b/Documentation/ABI/testing/sysfs-devices-consumer new file mode 100644 index 000000000000..1f06d74d1c3c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-consumer @@ -0,0 +1,8 @@ +What: /sys/devices/.../consumer:<consumer> +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + The /sys/devices/.../consumer:<consumer> are symlinks to device + links where this device is the supplier. <consumer> denotes the + name of the consumer in that device link. There can be zero or + more of these symlinks for a given device. diff --git a/Documentation/ABI/testing/sysfs-devices-mapping b/Documentation/ABI/testing/sysfs-devices-mapping new file mode 100644 index 000000000000..490ccfd67f12 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-mapping @@ -0,0 +1,33 @@ +What: /sys/devices/uncore_iio_x/dieX +Date: February 2020 +Contact: Roman Sudarikov <roman.sudarikov@linux.intel.com> +Description: + Each IIO stack (PCIe root port) has its own IIO PMON block, so + each dieX file (where X is die number) holds "Segment:Root Bus" + for PCIe root port, which can be monitored by that IIO PMON + block. + For example, on 4-die Xeon platform with up to 6 IIO stacks per + die and, therefore, 6 IIO PMON blocks per die, the mapping of + IIO PMON block 0 exposes as the following: + + $ ls /sys/devices/uncore_iio_0/die* + -r--r--r-- /sys/devices/uncore_iio_0/die0 + -r--r--r-- /sys/devices/uncore_iio_0/die1 + -r--r--r-- /sys/devices/uncore_iio_0/die2 + -r--r--r-- /sys/devices/uncore_iio_0/die3 + + $ tail /sys/devices/uncore_iio_0/die* + ==> /sys/devices/uncore_iio_0/die0 <== + 0000:00 + ==> /sys/devices/uncore_iio_0/die1 <== + 0000:40 + ==> /sys/devices/uncore_iio_0/die2 <== + 0000:80 + ==> /sys/devices/uncore_iio_0/die3 <== + 0000:c0 + + Which means: + IIO PMU 0 on die 0 belongs to PCI RP on bus 0x00, domain 0x0000 + IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000 + IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000 + IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000 diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu index ae9af984471a..a8daceb4a956 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu +++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu @@ -126,3 +126,39 @@ Description: 1 no action 0 firmware record the notify code defined in b[15:0]. + +What: /sys/devices/platform/stratix10-rsu.0/dcmf0 +Date: June 2020 +KernelVersion: 5.8 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) Decision firmware copy 0 version information. + +What: /sys/devices/platform/stratix10-rsu.0/dcmf1 +Date: June 2020 +KernelVersion: 5.8 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) Decision firmware copy 1 version information. + +What: /sys/devices/platform/stratix10-rsu.0/dcmf2 +Date: June 2020 +KernelVersion: 5.8 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) Decision firmware copy 2 version information. + +What: /sys/devices/platform/stratix10-rsu.0/dcmf3 +Date: June 2020 +KernelVersion: 5.8 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) Decision firmware copy 3 version information. + +What: /sys/devices/platform/stratix10-rsu.0/max_retry +Date: June 2020 +KernelVersion: 5.8 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) max retry parameter is stored in the firmware + decision IO section, as a byte located at offset 0x18c. diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc index ba3a3fac0ee1..ea999e292f11 100644 --- a/Documentation/ABI/testing/sysfs-devices-soc +++ b/Documentation/ABI/testing/sysfs-devices-soc @@ -26,6 +26,30 @@ Description: Read-only attribute common to all SoCs. Contains SoC family name (e.g. DB8500). + On many of ARM based silicon with SMCCC v1.2+ compliant firmware + this will contain the JEDEC JEP106 manufacturer’s identification + code. The format is "jep106:XXYY" where XX is identity code and + YY is continuation code. + + This manufacturer’s identification code is defined by one + or more eight (8) bit fields, each consisting of seven (7) + data bits plus one (1) odd parity bit. It is a single field, + limiting the possible number of vendors to 126. To expand + the maximum number of identification codes, a continuation + scheme has been defined. + + The specified mechanism is that an identity code of 0x7F + represents the "continuation code" and implies the presence + of an additional identity code field, and this mechanism + may be extended to multiple continuation codes followed + by the manufacturer's identity code. + + For example, ARM has identity code 0x7F 0x7F 0x7F 0x7F 0x3B, + which is code 0x3B on the fifth 'page'. This is shortened + as JEP106 identity code of 0x3B and a continuation code of + 0x4 to represent the four continuation codes preceding the + identity code. + What: /sys/devices/socX/serial_number Date: January 2019 contact: Bjorn Andersson <bjorn.andersson@linaro.org> @@ -40,6 +64,12 @@ Description: Read-only attribute supported by most SoCs. In the case of ST-Ericsson's chips this contains the SoC serial number. + On many of ARM based silicon with SMCCC v1.2+ compliant firmware + this will contain the SOC ID appended to the family attribute + to ensure there is no conflict in this namespace across various + vendors. The format is "jep106:XXYY:ZZZZ" where XX is identity + code, YY is continuation code and ZZZZ is the SOC ID. + What: /sys/devices/socX/revision Date: January 2012 contact: Lee Jones <lee.jones@linaro.org> diff --git a/Documentation/ABI/testing/sysfs-devices-state_synced b/Documentation/ABI/testing/sysfs-devices-state_synced new file mode 100644 index 000000000000..0c922d7d02fc --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-state_synced @@ -0,0 +1,24 @@ +What: /sys/devices/.../state_synced +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + The /sys/devices/.../state_synced attribute is only present for + devices whose bus types or driver provides the .sync_state() + callback. The number read from it (0 or 1) reflects the value + of the device's 'state_synced' field. A value of 0 means the + .sync_state() callback hasn't been called yet. A value of 1 + means the .sync_state() callback has been called. + + Generally, if a device has sync_state() support and has some of + the resources it provides enabled at the time the kernel starts + (Eg: enabled by hardware reset or bootloader or anything that + run before the kernel starts), then it'll keep those resources + enabled and in a state that's compatible with the state they + were in at the start of the kernel. The device will stop doing + this only when the sync_state() callback has been called -- + which happens only when all its consumer devices are registered + and have probed successfully. Resources that were left disabled + at the time the kernel starts are not affected or limited in + any way by sync_state() callbacks. + + diff --git a/Documentation/ABI/testing/sysfs-devices-supplier b/Documentation/ABI/testing/sysfs-devices-supplier new file mode 100644 index 000000000000..a919e0db5e90 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-supplier @@ -0,0 +1,8 @@ +What: /sys/devices/.../supplier:<supplier> +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + The /sys/devices/.../supplier:<supplier> are symlinks to device + links where this device is the consumer. <supplier> denotes the + name of the supplier in that device link. There can be zero or + more of these symlinks for a given device. diff --git a/Documentation/ABI/testing/sysfs-devices-waiting_for_supplier b/Documentation/ABI/testing/sysfs-devices-waiting_for_supplier new file mode 100644 index 000000000000..59d073d20db6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-waiting_for_supplier @@ -0,0 +1,17 @@ +What: /sys/devices/.../waiting_for_supplier +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + The /sys/devices/.../waiting_for_supplier attribute is only + present when fw_devlink kernel command line option is enabled + and is set to something stricter than "permissive". It is + removed once a device probes successfully (because the + information is no longer relevant). The number read from it (0 + or 1) reflects whether the device is waiting for one or more + suppliers to be added and then linked to using device links + before the device can probe. + + A value of 0 means the device is not waiting for any suppliers + to be added before it can probe. A value of 1 means the device + is waiting for one or more suppliers to be added before it can + probe. diff --git a/Documentation/ABI/testing/sysfs-driver-input-exc3000 b/Documentation/ABI/testing/sysfs-driver-input-exc3000 new file mode 100644 index 000000000000..3d316d54f81c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-input-exc3000 @@ -0,0 +1,15 @@ +What: /sys/bus/i2c/devices/xxx/fw_version +Date: Aug 2020 +Contact: linux-input@vger.kernel.org +Description: Reports the firmware version provided by the touchscreen, for example "00_T6" on a EXC80H60 + + Access: Read + Valid values: Represented as string + +What: /sys/bus/i2c/devices/xxx/model +Date: Aug 2020 +Contact: linux-input@vger.kernel.org +Description: Reports the model identification provided by the touchscreen, for example "Orion_1320" on a EXC80H60 + + Access: Read + Valid values: Represented as string diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 016724ec26d5..d1a352194d2e 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -883,3 +883,139 @@ Contact: Subhash Jadavani <subhashj@codeaurora.org> Description: This entry shows the target state of an UFS UIC link for the chosen system power management level. The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows if preserve user-space was configured + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the shared allocated units of WB buffer + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the configured WB type. + 0x1 for shared buffer mode. 0x0 for dedicated buffer mode. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the total user-space decrease in shared + buffer mode. + The value of this parameter is 3 for TLC NAND when SLC mode + is used as WriteBooster Buffer. 2 for MLC NAND. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the Maximum total WriteBooster Buffer size + which is supported by the entire device. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the maximum number of luns that can support + WriteBooster. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: The supportability of user space reduction mode + and preserve user space mode. + 00h: WriteBooster Buffer can be configured only in + user space reduction type. + 01h: WriteBooster Buffer can be configured only in + preserve user space type. + 02h: Device can be configured in either user space + reduction type or preserve user space type. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: The supportability of WriteBooster Buffer type. + 00h: LU based WriteBooster Buffer configuration + 01h: Single shared WriteBooster Buffer + configuration + 02h: Supporting both LU based WriteBooster + Buffer and Single shared WriteBooster Buffer + configuration + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the status of WriteBooster. + 0: WriteBooster is not enabled. + 1: WriteBooster is enabled + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows if flush is enabled. + 0: Flush operation is not performed. + 1: Flush operation is performed. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8 +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: Flush WriteBooster Buffer during hibernate state. + 0: Device is not allowed to flush the + WriteBooster Buffer during link hibernate + state. + 1: Device is allowed to flush the + WriteBooster Buffer during link hibernate + state + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the amount of unused WriteBooster buffer + available. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the amount of unused current buffer. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the flush operation status. + 00h: idle + 01h: Flush operation in progress + 02h: Flush operation stopped prematurely. + 03h: Flush operation completed successfully + 04h: Flush operation general failure + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows an indication of the WriteBooster Buffer + lifetime based on the amount of performed program/erase cycles + 01h: 0% - 10% WriteBooster Buffer life time used + ... + 0Ah: 90% - 100% WriteBooster Buffer life time used + The file is read only. + +What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units +Date: June 2020 +Contact: Asutosh Das <asutoshd@codeaurora.org> +Description: This entry shows the configured size of WriteBooster buffer. + 0400h corresponds to 4GB. + The file is read only. diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm index 076659d506f2..9b488c0afdfa 100644 --- a/Documentation/ABI/testing/sysfs-driver-w1_therm +++ b/Documentation/ABI/testing/sysfs-driver-w1_therm @@ -8,7 +8,7 @@ Description: to device min/max capabilities. Values are integer as they are stored in a 8bit register in the device. Lowest value is automatically put to TL. Once set, alarms could be search at - master level, refer to Documentation/w1/w1_generic.rst for + master level, refer to Documentation/w1/w1-generic.rst for detailed information Users: any user space application which wants to communicate with w1_term device diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 4bb93a06d8ab..7f730c4c8df2 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -229,7 +229,9 @@ Date: August 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> Description: Do background GC agressively when set. When gc_urgent = 1, background thread starts to do GC by given gc_urgent_sleep_time - interval. It is set to 0 by default. + interval. When gc_urgent = 2, F2FS will lower the bar of + checking idle in order to process outstanding discard commands + and GC a little bit aggressively. It is set to 0 by default. What: /sys/fs/f2fs/<disk>/gc_urgent_sleep_time Date: August 2017 |