aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/clock/idt,versaclock5.yaml')
-rw-r--r--Documentation/devicetree/bindings/clock/idt,versaclock5.yaml197
1 files changed, 197 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
new file mode 100644
index 000000000000..a2c6eea9871d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT VersaClock 5 and 6 programmable I2C clock generators
+
+description: |
+ The IDT VersaClock 5 and VersaClock 6 are programmable I2C
+ clock generators providing from 3 to 12 output clocks.
+
+ When referencing the provided clock in the DT using phandle and clock
+ specifier, the following mapping applies:
+
+ - 5P49V5923:
+ 0 -- OUT0_SEL_I2CB
+ 1 -- OUT1
+ 2 -- OUT2
+
+ - 5P49V5933:
+ 0 -- OUT0_SEL_I2CB
+ 1 -- OUT1
+ 2 -- OUT4
+
+ - other parts:
+ 0 -- OUT0_SEL_I2CB
+ 1 -- OUT1
+ 2 -- OUT2
+ 3 -- OUT3
+ 4 -- OUT4
+
+ The idt,shutdown and idt,output-enable-active properties control the
+ SH (en_global_shutdown) and SP bits of the Primary Source and Shutdown
+ Register, respectively. Their behavior is summarized by the following
+ table:
+
+ SH SP Output when the SD/OE pin is Low/High
+ == == =====================================
+ 0 0 Active/Inactive
+ 0 1 Inactive/Active
+ 1 0 Active/Shutdown
+ 1 1 Inactive/Shutdown
+
+ The case where SH and SP are both 1 is likely not very interesting.
+
+maintainers:
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+ compatible:
+ enum:
+ - idt,5p49v5923
+ - idt,5p49v5925
+ - idt,5p49v5933
+ - idt,5p49v5935
+ - idt,5p49v60
+ - idt,5p49v6901
+ - idt,5p49v6965
+ - idt,5p49v6975
+
+ reg:
+ description: I2C device address
+ enum: [ 0x68, 0x6a ]
+
+ '#clock-cells':
+ const: 1
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [ xin, clkin ]
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ idt,xtal-load-femtofarads:
+ minimum: 9000
+ maximum: 22760
+ description: Optional load capacitor for XTAL1 and XTAL2
+
+ idt,shutdown:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ If 1, this enables the shutdown functionality: the chip will be
+ shut down if the SD/OE pin is driven high. If 0, this disables the
+ shutdown functionality: the chip will never be shut down based on
+ the value of the SD/OE pin. This property corresponds to the SH
+ bit of the Primary Source and Shutdown Register.
+
+ idt,output-enable-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ If 1, this enables output when the SD/OE pin is high, and disables
+ output when the SD/OE pin is low. If 0, this disables output when
+ the SD/OE pin is high, and enables output when the SD/OE pin is
+ low. This corresponds to the SP bit of the Primary Source and
+ Shutdown Register.
+
+patternProperties:
+ "^OUT[1-4]$":
+ type: object
+ description:
+ Description of one of the outputs (OUT1..OUT4). See "Clock1 Output
+ Configuration" in the Versaclock 5/6/6E Family Register Description
+ and Programming Guide.
+ properties:
+ idt,mode:
+ description:
+ The output drive mode. Values defined in dt-bindings/clock/versaclock.h
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 6
+ idt,voltage-microvolt:
+ description: The output drive voltage.
+ enum: [ 1800000, 2500000, 3300000 ]
+ idt,slew-percent:
+ description: The Slew rate control for CMOS single-ended.
+ enum: [ 80, 85, 90, 100 ]
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - idt,shutdown
+ - idt,output-enable-active
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - idt,5p49v5933
+ - idt,5p49v5935
+ - idt,5p49v6975
+ then:
+ # Devices with builtin crystal + optional external input
+ properties:
+ clock-names:
+ const: clkin
+ clocks:
+ maxItems: 1
+ else:
+ # Devices without builtin crystal
+ required:
+ - clock-names
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/versaclock.h>
+
+ /* 25MHz reference crystal */
+ ref25: ref25m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ i2c@0 {
+ reg = <0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* IDT 5P49V5923 I2C clock generator */
+ vc5: clock-generator@6a {
+ compatible = "idt,5p49v5923";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+
+ /* Connect XIN input to 25MHz reference */
+ clocks = <&ref25m>;
+ clock-names = "xin";
+
+ /* Set the SD/OE pin's settings */
+ idt,shutdown = <0>;
+ idt,output-enable-active = <0>;
+
+ OUT1 {
+ idt,mode = <VC5_CMOSD>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <80>;
+ };
+
+ OUT4 {
+ idt,mode = <VC5_LVDS>;
+ };
+ };
+ };
+
+...