diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
55 files changed, 1665 insertions, 1034 deletions
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml index ed1b2126a81b..9a37a357cb4e 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml @@ -52,12 +52,12 @@ properties: - const: allwinner,sun4i-a10-dram-gates-clk - items: - - const: allwinner,sun5i-a13-dram-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun5i-a13-dram-gates-clk + - const: allwinner,sun4i-a10-gates-clk - items: - - const: allwinner,sun8i-h3-apb0-gates-clk - - const: allwinner,sun4i-a10-gates-clk + - const: allwinner,sun8i-h3-apb0-gates-clk + - const: allwinner,sun4i-a10-gates-clk reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml index de9a465096db..444aeea27db8 100644 --- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -91,7 +91,7 @@ required: examples: - | - vco1: clock@00 { + vco1: clock { compatible = "arm,impd1-vco1"; #clock-cells = <0>; lock-offset = <0x08>; diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml index 8559fe8f7efd..228c9313df53 100644 --- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml @@ -65,7 +65,7 @@ examples: - | uart0: serial@58018000 { compatible = "snps,dw-apb-uart"; - reg = <0x0 0x58018000 0x0 0x2000>; + reg = <0x58018000 0x2000>; clocks = <&clk 45>, <&clk 46>; clock-names = "baudclk", "apb_pclk"; interrupts = <0 9 4>; diff --git a/Documentation/devicetree/bindings/clock/calxeda.txt b/Documentation/devicetree/bindings/clock/calxeda.txt deleted file mode 100644 index 0a6ac1bdcda1..000000000000 --- a/Documentation/devicetree/bindings/clock/calxeda.txt +++ /dev/null @@ -1,17 +0,0 @@ -Device Tree Clock bindings for Calxeda highbank platform - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be one of the following: - "calxeda,hb-pll-clock" - for a PLL clock - "calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the - A9 clock. - "calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock. - "calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller. -- reg : shall be the control register offset from SYSREGs base for the clock. -- clocks : shall be the input parent clock phandle for the clock. This is - either an oscillator or a pll output. -- #clock-cells : from common clock binding; shall be set to 0. diff --git a/Documentation/devicetree/bindings/clock/calxeda.yaml b/Documentation/devicetree/bindings/clock/calxeda.yaml new file mode 100644 index 000000000000..a34cbf3c9aaf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/calxeda.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/calxeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device Tree Clock bindings for Calxeda highbank platform + +description: | + This binding covers the Calxeda SoC internal peripheral and bus clocks + as used by peripherals. The clocks live inside the "system register" + region of the SoC, so are typically presented as children of an + "hb-sregs" node. + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +properties: + "#clock-cells": + const: 0 + + compatible: + enum: + - calxeda,hb-pll-clock + - calxeda,hb-a9periph-clock + - calxeda,hb-a9bus-clock + - calxeda,hb-emmc-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - clocks + - reg + +additionalProperties: false + +examples: + - | + sregs@3fffc000 { + compatible = "calxeda,hb-sregs"; + reg = <0x3fffc000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll@108 { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll@100 { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk@104 { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt deleted file mode 100644 index 52a064c789ee..000000000000 --- a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt +++ /dev/null @@ -1,94 +0,0 @@ -Cirrus Logic Lochnagar Audio Development Board - -Lochnagar is an evaluation and development board for Cirrus Logic -Smart CODEC and Amp devices. It allows the connection of most Cirrus -Logic devices on mini-cards, as well as allowing connection of -various application processor systems to provide a full evaluation -platform. Audio system topology, clocking and power can all be -controlled through the Lochnagar, allowing the device under test -to be used in a variety of possible use cases. - -This binding document describes the binding for the clock portion of -the driver. - -Also see these documents for generic binding information: - [1] Clock : ../clock/clock-bindings.txt - -And these for relevant defines: - [2] include/dt-bindings/clock/lochnagar.h - -This binding must be part of the Lochnagar MFD binding: - [3] ../mfd/cirrus,lochnagar.txt - -Required properties: - - - compatible : One of the following strings: - "cirrus,lochnagar1-clk" - "cirrus,lochnagar2-clk" - - - #clock-cells : Must be 1. The first cell indicates the clock - number, see [2] for available clocks and [1]. - -Optional properties: - - - clocks : Must contain an entry for each clock in clock-names. - - clock-names : May contain entries for each of the following - clocks: - - ln-cdc-clkout : Output clock from CODEC card. - - ln-dsp-clkout : Output clock from DSP card. - - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional - input audio clocks from host system. - - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from - external connector. - - ln-spdif-mclk : Optional input audio clock from SPDIF. - - ln-spdif-clkout : Optional input audio clock from SPDIF. - - ln-adat-mclk : Optional input audio clock from ADAT. - - ln-pmic-32k : On board fixed clock. - - ln-clk-12m : On board fixed clock. - - ln-clk-11m : On board fixed clock. - - ln-clk-24m : On board fixed clock. - - ln-clk-22m : On board fixed clock. - - ln-clk-8m : On board fixed clock. - - ln-usb-clk-24m : On board fixed clock. - - ln-usb-clk-12m : On board fixed clock. - - - assigned-clocks : A list of Lochnagar clocks to be reparented, see - [2] for available clocks. - - assigned-clock-parents : Parents to be assigned to the clocks - listed in "assigned-clocks". - -Optional nodes: - - - fixed-clock nodes may be registered for the following on board clocks: - - ln-pmic-32k : 32768 Hz - - ln-clk-12m : 12288000 Hz - - ln-clk-11m : 11298600 Hz - - ln-clk-24m : 24576000 Hz - - ln-clk-22m : 22579200 Hz - - ln-clk-8m : 8192000 Hz - - ln-usb-clk-24m : 24576000 Hz - - ln-usb-clk-12m : 12288000 Hz - -Example: - -lochnagar { - lochnagar-clk { - compatible = "cirrus,lochnagar2-clk"; - - #clock-cells = <1>; - - clocks = <&clk-audio>, <&clk_pmic>; - clock-names = "ln-gf-mclk2", "ln-pmic-32k"; - - assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>, - <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>; - assigned-clock-parents = <&clk-audio>, - <&clk-pmic>; - }; - - clk-pmic: clk-pmic { - compatible = "fixed-clock"; - clock-cells = <0>; - clock-frequency = <32768>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml new file mode 100644 index 000000000000..59de125647ec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Lochnagar Audio Development Board + +maintainers: + - patches@opensource.cirrus.com + +description: | + Lochnagar is an evaluation and development board for Cirrus Logic + Smart CODEC and Amp devices. It allows the connection of most Cirrus + Logic devices on mini-cards, as well as allowing connection of various + application processor systems to provide a full evaluation platform. + Audio system topology, clocking and power can all be controlled through + the Lochnagar, allowing the device under test to be used in a variety of + possible use cases. + + This binding document describes the binding for the clock portion of the + driver. + + Also see these documents for generic binding information: + [1] Clock : ../clock/clock-bindings.txt + + And these for relevant defines: + [2] include/dt-bindings/clock/lochnagar.h + + This binding must be part of the Lochnagar MFD binding: + [3] ../mfd/cirrus,lochnagar.yaml + +properties: + compatible: + enum: + - cirrus,lochnagar1-clk + - cirrus,lochnagar2-clk + + '#clock-cells': + description: + The first cell indicates the clock number, see [2] for available + clocks and [1]. + const: 1 + + clock-names: + items: + enum: + - ln-cdc-clkout # Output clock from CODEC card. + - ln-dsp-clkout # Output clock from DSP card. + - ln-gf-mclk1 # Optional input clock from host system. + - ln-gf-mclk2 # Optional input clock from host system. + - ln-gf-mclk3 # Optional input clock from host system. + - ln-gf-mclk4 # Optional input clock from host system. + - ln-psia1-mclk # Optional input clock from external connector. + - ln-psia2-mclk # Optional input clock from external connector. + - ln-spdif-mclk # Optional input clock from SPDIF. + - ln-spdif-clkout # Optional input clock from SPDIF. + - ln-adat-mclk # Optional input clock from ADAT. + - ln-pmic-32k # On board fixed clock. + - ln-clk-12m # On board fixed clock. + - ln-clk-11m # On board fixed clock. + - ln-clk-24m # On board fixed clock. + - ln-clk-22m # On board fixed clock. + - ln-clk-8m # On board fixed clock. + - ln-usb-clk-24m # On board fixed clock. + - ln-usb-clk-12m # On board fixed clock. + minItems: 1 + maxItems: 19 + + clocks: true + assigned-clocks: true + assigned-clock-parents: true + +additionalProperties: false + +required: + - compatible + - '#clock-cells' diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml index b567f8092f8c..f415845b38dd 100644 --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml @@ -24,9 +24,8 @@ properties: clock-div: description: Fixed divider - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 clock-mult: description: Fixed multiplier diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml index a203d5d498db..9ac716dfa602 100644 --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml @@ -28,15 +28,14 @@ properties: const: 0 fsl,vco-hz: - description: Optional for VCO frequency of the PLL in Hertz. - The VCO frequency of this PLL cannot be changed during runtime - only at startup. Therefore, the output frequencies are very - limited and might not even closely match the requested frequency. - To work around this restriction the user may specify its own - desired VCO frequency for the PLL. - minimum: 650000000 - maximum: 1300000000 - default: 1188000000 + description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency + of this PLL cannot be changed during runtime only at startup. Therefore, + the output frequencies are very limited and might not even closely match + the requested frequency. To work around this restriction the user may specify + its own desired VCO frequency for the PLL. + minimum: 650000000 + maximum: 1300000000 + default: 1188000000 required: - compatible @@ -51,7 +50,7 @@ examples: - | dpclk: clock-display@f1f0000 { compatible = "fsl,ls1028a-plldig"; - reg = <0x0 0xf1f0000 0x0 0xffff>; + reg = <0xf1f0000 0xffff>; #clock-cells = <0>; clocks = <&osc_27m>; }; diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt deleted file mode 100644 index 9823baf7acb6..000000000000 --- a/Documentation/devicetree/bindings/clock/imx1-clock.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Clock bindings for Freescale i.MX1 CPUs - -Required properties: -- compatible: Should be "fsl,imx1-ccm". -- reg: Address and length of the register set. -- #clock-cells: Should be <1>. - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h -for the full list of i.MX1 clock IDs. - -Examples: - clks: ccm@21b000 { - #clock-cells = <1>; - compatible = "fsl,imx1-ccm"; - reg = <0x0021b000 0x1000>; - }; - - pwm: pwm@208000 { - #pwm-cells = <2>; - compatible = "fsl,imx1-pwm"; - reg = <0x00208000 0x1000>; - interrupts = <34>; - clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml new file mode 100644 index 000000000000..f4833a29b79e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx1-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX1 CPUs + +maintainers: + - Alexander Shiyan <shc_work@mail.ru> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h + for the full list of i.MX1 clock IDs. + +properties: + compatible: + const: fsl,imx1-ccm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx1-clock.h> + + clock-controller@21b000 { + #clock-cells = <1>; + compatible = "fsl,imx1-ccm"; + reg = <0x0021b000 0x1000>; + }; + + pwm@208000 { + #pwm-cells = <2>; + compatible = "fsl,imx1-pwm"; + reg = <0x00208000 0x1000>; + interrupts = <34>; + clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt deleted file mode 100644 index 806f63d628bd..000000000000 --- a/Documentation/devicetree/bindings/clock/imx21-clock.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Clock bindings for Freescale i.MX21 - -Required properties: -- compatible : Should be "fsl,imx21-ccm". -- reg : Address and length of the register set. -- interrupts : Should contain CCM interrupt. -- #clock-cells: Should be <1>. - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h -for the full list of i.MX21 clock IDs. - -Examples: - clks: ccm@10027000{ - compatible = "fsl,imx21-ccm"; - reg = <0x10027000 0x800>; - #clock-cells = <1>; - }; - - uart1: serial@1000a000 { - compatible = "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, - <&clks IMX21_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml new file mode 100644 index 000000000000..518ad9a4733c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx21-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX21 + +maintainers: + - Alexander Shiyan <shc_work@mail.ru> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h + for the full list of i.MX21 clock IDs. + +properties: + compatible: + const: fsl,imx21-ccm + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx21-clock.h> + + clock-controller@10027000 { + compatible = "fsl,imx21-ccm"; + reg = <0x10027000 0x800>; + #clock-cells = <1>; + }; + + serial@1000a000 { + compatible = "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, + <&clks IMX21_CLK_PER1>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt deleted file mode 100644 index 8385348d3bd9..000000000000 --- a/Documentation/devicetree/bindings/clock/imx23-clock.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Clock bindings for Freescale i.MX23 - -Required properties: -- compatible: Should be "fsl,imx23-clkctrl" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX23 -clocks and IDs. - - Clock ID - ------------------ - ref_xtal 0 - pll 1 - ref_cpu 2 - ref_emi 3 - ref_pix 4 - ref_io 5 - saif_sel 6 - lcdif_sel 7 - gpmi_sel 8 - ssp_sel 9 - emi_sel 10 - cpu 11 - etm_sel 12 - cpu_pll 13 - cpu_xtal 14 - hbus 15 - xbus 16 - lcdif_div 17 - ssp_div 18 - gpmi_div 19 - emi_pll 20 - emi_xtal 21 - etm_div 22 - saif_div 23 - clk32k_div 24 - rtc 25 - adc 26 - spdif_div 27 - clk32k 28 - dri 29 - pwm 30 - filt 31 - uart 32 - ssp 33 - gpmi 34 - spdif 35 - emi 36 - saif 37 - lcdif 38 - etm 39 - usb 40 - usb_phy 41 - -Examples: - -clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl"; - reg = <0x80040000 0x2000>; - #clock-cells = <1>; -}; - -auart0: serial@8006c000 { - compatible = "fsl,imx23-auart"; - reg = <0x8006c000 0x2000>; - interrupts = <24 25 23>; - clocks = <&clks 32>; -}; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml new file mode 100644 index 000000000000..66cb238a1040 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx23-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX23 + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX23 + clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll 1 + ref_cpu 2 + ref_emi 3 + ref_pix 4 + ref_io 5 + saif_sel 6 + lcdif_sel 7 + gpmi_sel 8 + ssp_sel 9 + emi_sel 10 + cpu 11 + etm_sel 12 + cpu_pll 13 + cpu_xtal 14 + hbus 15 + xbus 16 + lcdif_div 17 + ssp_div 18 + gpmi_div 19 + emi_pll 20 + emi_xtal 21 + etm_div 22 + saif_div 23 + clk32k_div 24 + rtc 25 + adc 26 + spdif_div 27 + clk32k 28 + dri 29 + pwm 30 + filt 31 + uart 32 + ssp 33 + gpmi 34 + spdif 35 + emi 36 + saif 37 + lcdif 38 + etm 39 + usb 40 + usb_phy 41 + +properties: + compatible: + const: fsl,imx23-clkctrl + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@80040000 { + compatible = "fsl,imx23-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + }; + + serial@8006c000 { + compatible = "fsl,imx23-auart"; + reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; + clocks = <&clks 32>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt deleted file mode 100644 index f8135ea9ca4e..000000000000 --- a/Documentation/devicetree/bindings/clock/imx25-clock.txt +++ /dev/null @@ -1,160 +0,0 @@ -* Clock bindings for Freescale i.MX25 - -Required properties: -- compatible: Should be "fsl,imx25-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX25 -clocks and IDs. - - Clock ID - --------------------------- - dummy 0 - osc 1 - mpll 2 - upll 3 - mpll_cpu_3_4 4 - cpu_sel 5 - cpu 6 - ahb 7 - usb_div 8 - ipg 9 - per0_sel 10 - per1_sel 11 - per2_sel 12 - per3_sel 13 - per4_sel 14 - per5_sel 15 - per6_sel 16 - per7_sel 17 - per8_sel 18 - per9_sel 19 - per10_sel 20 - per11_sel 21 - per12_sel 22 - per13_sel 23 - per14_sel 24 - per15_sel 25 - per0 26 - per1 27 - per2 28 - per3 29 - per4 30 - per5 31 - per6 32 - per7 33 - per8 34 - per9 35 - per10 36 - per11 37 - per12 38 - per13 39 - per14 40 - per15 41 - csi_ipg_per 42 - epit_ipg_per 43 - esai_ipg_per 44 - esdhc1_ipg_per 45 - esdhc2_ipg_per 46 - gpt_ipg_per 47 - i2c_ipg_per 48 - lcdc_ipg_per 49 - nfc_ipg_per 50 - owire_ipg_per 51 - pwm_ipg_per 52 - sim1_ipg_per 53 - sim2_ipg_per 54 - ssi1_ipg_per 55 - ssi2_ipg_per 56 - uart_ipg_per 57 - ata_ahb 58 - reserved 59 - csi_ahb 60 - emi_ahb 61 - esai_ahb 62 - esdhc1_ahb 63 - esdhc2_ahb 64 - fec_ahb 65 - lcdc_ahb 66 - rtic_ahb 67 - sdma_ahb 68 - slcdc_ahb 69 - usbotg_ahb 70 - reserved 71 - reserved 72 - reserved 73 - reserved 74 - can1_ipg 75 - can2_ipg 76 - csi_ipg 77 - cspi1_ipg 78 - cspi2_ipg 79 - cspi3_ipg 80 - dryice_ipg 81 - ect_ipg 82 - epit1_ipg 83 - epit2_ipg 84 - reserved 85 - esdhc1_ipg 86 - esdhc2_ipg 87 - fec_ipg 88 - reserved 89 - reserved 90 - reserved 91 - gpt1_ipg 92 - gpt2_ipg 93 - gpt3_ipg 94 - gpt4_ipg 95 - reserved 96 - reserved 97 - reserved 98 - iim_ipg 99 - reserved 100 - reserved 101 - kpp_ipg 102 - lcdc_ipg 103 - reserved 104 - pwm1_ipg 105 - pwm2_ipg 106 - pwm3_ipg 107 - pwm4_ipg 108 - rngb_ipg 109 - reserved 110 - scc_ipg 111 - sdma_ipg 112 - sim1_ipg 113 - sim2_ipg 114 - slcdc_ipg 115 - spba_ipg 116 - ssi1_ipg 117 - ssi2_ipg 118 - tsc_ipg 119 - uart1_ipg 120 - uart2_ipg 121 - uart3_ipg 122 - uart4_ipg 123 - uart5_ipg 124 - reserved 125 - wdt_ipg 126 - cko_div 127 - cko_sel 128 - cko 129 - -Examples: - -clks: ccm@53f80000 { - compatible = "fsl,imx25-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>; -}; - -uart1: serial@43f90000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 79>, <&clks 50>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml new file mode 100644 index 000000000000..2a2b10778e72 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx25-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX25 + +maintainers: + - Sascha Hauer <s.hauer@pengutronix.de> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX25 + clocks and IDs. + + Clock ID + -------------------------- + dummy 0 + osc 1 + mpll 2 + upll 3 + mpll_cpu_3_4 4 + cpu_sel 5 + cpu 6 + ahb 7 + usb_div 8 + ipg 9 + per0_sel 10 + per1_sel 11 + per2_sel 12 + per3_sel 13 + per4_sel 14 + per5_sel 15 + per6_sel 16 + per7_sel 17 + per8_sel 18 + per9_sel 19 + per10_sel 20 + per11_sel 21 + per12_sel 22 + per13_sel 23 + per14_sel 24 + per15_sel 25 + per0 26 + per1 27 + per2 28 + per3 29 + per4 30 + per5 31 + per6 32 + per7 33 + per8 34 + per9 35 + per10 36 + per11 37 + per12 38 + per13 39 + per14 40 + per15 41 + csi_ipg_per 42 + epit_ipg_per 43 + esai_ipg_per 44 + esdhc1_ipg_per 45 + esdhc2_ipg_per 46 + gpt_ipg_per 47 + i2c_ipg_per 48 + lcdc_ipg_per 49 + nfc_ipg_per 50 + owire_ipg_per 51 + pwm_ipg_per 52 + sim1_ipg_per 53 + sim2_ipg_per 54 + ssi1_ipg_per 55 + ssi2_ipg_per 56 + uart_ipg_per 57 + ata_ahb 58 + reserved 59 + csi_ahb 60 + emi_ahb 61 + esai_ahb 62 + esdhc1_ahb 63 + esdhc2_ahb 64 + fec_ahb 65 + lcdc_ahb 66 + rtic_ahb 67 + sdma_ahb 68 + slcdc_ahb 69 + usbotg_ahb 70 + reserved 71 + reserved 72 + reserved 73 + reserved 74 + can1_ipg 75 + can2_ipg 76 + csi_ipg 77 + cspi1_ipg 78 + cspi2_ipg 79 + cspi3_ipg 80 + dryice_ipg 81 + ect_ipg 82 + epit1_ipg 83 + epit2_ipg 84 + reserved 85 + esdhc1_ipg 86 + esdhc2_ipg 87 + fec_ipg 88 + reserved 89 + reserved 90 + reserved 91 + gpt1_ipg 92 + gpt2_ipg 93 + gpt3_ipg 94 + gpt4_ipg 95 + reserved 96 + reserved 97 + reserved 98 + iim_ipg 99 + reserved 100 + reserved 101 + kpp_ipg 102 + lcdc_ipg 103 + reserved 104 + pwm1_ipg 105 + pwm2_ipg 106 + pwm3_ipg 107 + pwm4_ipg 108 + rngb_ipg 109 + reserved 110 + scc_ipg 111 + sdma_ipg 112 + sim1_ipg 113 + sim2_ipg 114 + slcdc_ipg 115 + spba_ipg 116 + ssi1_ipg 117 + ssi2_ipg 118 + tsc_ipg 119 + uart1_ipg 120 + uart2_ipg 121 + uart3_ipg 122 + uart4_ipg 123 + uart5_ipg 124 + reserved 125 + wdt_ipg 126 + cko_div 127 + cko_sel 128 + cko 129 + +properties: + compatible: + const: fsl,imx25-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + serial@43f90000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 79>, <&clks 50>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt deleted file mode 100644 index 4c95c048d3b2..000000000000 --- a/Documentation/devicetree/bindings/clock/imx27-clock.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Clock bindings for Freescale i.MX27 - -Required properties: -- compatible: Should be "fsl,imx27-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h -for the full list of i.MX27 clock IDs. - -Examples: - clks: ccm@10027000{ - compatible = "fsl,imx27-ccm"; - reg = <0x10027000 0x1000>; - #clock-cells = <1>; - }; - - uart1: serial@1000a000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, - <&clks IMX27_CLK_PER1_GATE>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml new file mode 100644 index 000000000000..b5f3ed084ea0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx27-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX27 + +maintainers: + - Fabio Estevam <fabio.estevam@freescale.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h + for the full list of i.MX27 clock IDs. + +properties: + compatible: + const: fsl,imx27-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx27-clock.h> + + clock-controller@10027000 { + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + serial@1000a000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt deleted file mode 100644 index d84a37d2885f..000000000000 --- a/Documentation/devicetree/bindings/clock/imx28-clock.txt +++ /dev/null @@ -1,93 +0,0 @@ -* Clock bindings for Freescale i.MX28 - -Required properties: -- compatible: Should be "fsl,imx28-clkctrl" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX28 -clocks and IDs. - - Clock ID - ------------------ - ref_xtal 0 - pll0 1 - pll1 2 - pll2 3 - ref_cpu 4 - ref_emi 5 - ref_io0 6 - ref_io1 7 - ref_pix 8 - ref_hsadc 9 - ref_gpmi 10 - saif0_sel 11 - saif1_sel 12 - gpmi_sel 13 - ssp0_sel 14 - ssp1_sel 15 - ssp2_sel 16 - ssp3_sel 17 - emi_sel 18 - etm_sel 19 - lcdif_sel 20 - cpu 21 - ptp_sel 22 - cpu_pll 23 - cpu_xtal 24 - hbus 25 - xbus 26 - ssp0_div 27 - ssp1_div 28 - ssp2_div 29 - ssp3_div 30 - gpmi_div 31 - emi_pll 32 - emi_xtal 33 - lcdif_div 34 - etm_div 35 - ptp 36 - saif0_div 37 - saif1_div 38 - clk32k_div 39 - rtc 40 - lradc 41 - spdif_div 42 - clk32k 43 - pwm 44 - uart 45 - ssp0 46 - ssp1 47 - ssp2 48 - ssp3 49 - gpmi 50 - spdif 51 - emi 52 - saif0 53 - saif1 54 - lcdif 55 - etm 56 - fec 57 - can0 58 - can1 59 - usb0 60 - usb1 61 - usb0_phy 62 - usb1_phy 63 - enet_out 64 - -Examples: - -clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl"; - reg = <0x80040000 0x2000>; - #clock-cells = <1>; -}; - -auart0: serial@8006a000 { - compatible = "fsl,imx28-auart", "fsl,imx23-auart"; - reg = <0x8006a000 0x2000>; - interrupts = <112 70 71>; - clocks = <&clks 45>; -}; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml new file mode 100644 index 000000000000..72328d5ca09a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx28-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX28 + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX28 + clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll0 1 + pll1 2 + pll2 3 + ref_cpu 4 + ref_emi 5 + ref_io0 6 + ref_io1 7 + ref_pix 8 + ref_hsadc 9 + ref_gpmi 10 + saif0_sel 11 + saif1_sel 12 + gpmi_sel 13 + ssp0_sel 14 + ssp1_sel 15 + ssp2_sel 16 + ssp3_sel 17 + emi_sel 18 + etm_sel 19 + lcdif_sel 20 + cpu 21 + ptp_sel 22 + cpu_pll 23 + cpu_xtal 24 + hbus 25 + xbus 26 + ssp0_div 27 + ssp1_div 28 + ssp2_div 29 + ssp3_div 30 + gpmi_div 31 + emi_pll 32 + emi_xtal 33 + lcdif_div 34 + etm_div 35 + ptp 36 + saif0_div 37 + saif1_div 38 + clk32k_div 39 + rtc 40 + lradc 41 + spdif_div 42 + clk32k 43 + pwm 44 + uart 45 + ssp0 46 + ssp1 47 + ssp2 48 + ssp3 49 + gpmi 50 + spdif 51 + emi 52 + saif0 53 + saif1 54 + lcdif 55 + etm 56 + fec 57 + can0 58 + can1 59 + usb0 60 + usb1 61 + usb0_phy 62 + usb1_phy 63 + enet_out 64 + +properties: + compatible: + const: fsl,imx28-clkctrl + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@80040000 { + compatible = "fsl,imx28-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + }; + + serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; + clocks = <&clks 45>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt deleted file mode 100644 index 0a291090e562..000000000000 --- a/Documentation/devicetree/bindings/clock/imx31-clock.txt +++ /dev/null @@ -1,90 +0,0 @@ -* Clock bindings for Freescale i.MX31 - -Required properties: -- compatible: Should be "fsl,imx31-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX31 -clocks and IDs. - - Clock ID - ----------------------- - dummy 0 - ckih 1 - ckil 2 - mpll 3 - spll 4 - upll 5 - mcu_main 6 - hsp 7 - ahb 8 - nfc 9 - ipg 10 - per_div 11 - per 12 - csi_sel 13 - fir_sel 14 - csi_div 15 - usb_div_pre 16 - usb_div_post 17 - fir_div_pre 18 - fir_div_post 19 - sdhc1_gate 20 - sdhc2_gate 21 - gpt_gate 22 - epit1_gate 23 - epit2_gate 24 - iim_gate 25 - ata_gate 26 - sdma_gate 27 - cspi3_gate 28 - rng_gate 29 - uart1_gate 30 - uart2_gate 31 - ssi1_gate 32 - i2c1_gate 33 - i2c2_gate 34 - i2c3_gate 35 - hantro_gate 36 - mstick1_gate 37 - mstick2_gate 38 - csi_gate 39 - rtc_gate 40 - wdog_gate 41 - pwm_gate 42 - sim_gate 43 - ect_gate 44 - usb_gate 45 - kpp_gate 46 - ipu_gate 47 - uart3_gate 48 - uart4_gate 49 - uart5_gate 50 - owire_gate 51 - ssi2_gate 52 - cspi1_gate 53 - cspi2_gate 54 - gacc_gate 55 - emi_gate 56 - rtic_gate 57 - firi_gate 58 - -Examples: - -clks: ccm@53f80000{ - compatible = "fsl,imx31-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>, <53>; - #clock-cells = <1>; -}; - -uart1: serial@43f90000 { - compatible = "fsl,imx31-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 10>, <&clks 30>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml new file mode 100644 index 000000000000..1b6f75d3928a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx31-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX31 + +maintainers: + - Fabio Estevam <fabio.estevam@freescale.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX31 + clocks and IDs. + + Clock ID + ----------------------- + dummy 0 + ckih 1 + ckil 2 + mpll 3 + spll 4 + upll 5 + mcu_main 6 + hsp 7 + ahb 8 + nfc 9 + ipg 10 + per_div 11 + per 12 + csi_sel 13 + fir_sel 14 + csi_div 15 + usb_div_pre 16 + usb_div_post 17 + fir_div_pre 18 + fir_div_post 19 + sdhc1_gate 20 + sdhc2_gate 21 + gpt_gate 22 + epit1_gate 23 + epit2_gate 24 + iim_gate 25 + ata_gate 26 + sdma_gate 27 + cspi3_gate 28 + rng_gate 29 + uart1_gate 30 + uart2_gate 31 + ssi1_gate 32 + i2c1_gate 33 + i2c2_gate 34 + i2c3_gate 35 + hantro_gate 36 + mstick1_gate 37 + mstick2_gate 38 + csi_gate 39 + rtc_gate 40 + wdog_gate 41 + pwm_gate 42 + sim_gate 43 + ect_gate 44 + usb_gate 45 + kpp_gate 46 + ipu_gate 47 + uart3_gate 48 + uart4_gate 49 + uart5_gate 50 + owire_gate 51 + ssi2_gate 52 + cspi1_gate 53 + cspi2_gate 54 + gacc_gate 55 + emi_gate 56 + rtic_gate 57 + firi_gate 58 + +properties: + compatible: + const: fsl,imx31-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for DVFS when a frequency change is requested, request 2 is + to generate interrupt for DPTC when a voltage change is requested. + items: + - description: CCM DVFS interrupt request 1 + - description: CCM DPTC interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>, <53>; + #clock-cells = <1>; + }; + + serial@43f90000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 10>, <&clks 30>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt deleted file mode 100644 index f49783213c56..000000000000 --- a/Documentation/devicetree/bindings/clock/imx35-clock.txt +++ /dev/null @@ -1,114 +0,0 @@ -* Clock bindings for Freescale i.MX35 - -Required properties: -- compatible: Should be "fsl,imx35-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX35 -clocks and IDs. - - Clock ID - --------------------------- - ckih 0 - mpll 1 - ppll 2 - mpll_075 3 - arm 4 - hsp 5 - hsp_div 6 - hsp_sel 7 - ahb 8 - ipg 9 - arm_per_div 10 - ahb_per_div 11 - ipg_per 12 - uart_sel 13 - uart_div 14 - esdhc_sel 15 - esdhc1_div 16 - esdhc2_div 17 - esdhc3_div 18 - spdif_sel 19 - spdif_div_pre 20 - spdif_div_post 21 - ssi_sel 22 - ssi1_div_pre 23 - ssi1_div_post 24 - ssi2_div_pre 25 - ssi2_div_post 26 - usb_sel 27 - usb_div 28 - nfc_div 29 - asrc_gate 30 - pata_gate 31 - audmux_gate 32 - can1_gate 33 - can2_gate 34 - cspi1_gate 35 - cspi2_gate 36 - ect_gate 37 - edio_gate 38 - emi_gate 39 - epit1_gate 40 - epit2_gate 41 - esai_gate 42 - esdhc1_gate 43 - esdhc2_gate 44 - esdhc3_gate 45 - fec_gate 46 - gpio1_gate 47 - gpio2_gate 48 - gpio3_gate 49 - gpt_gate 50 - i2c1_gate 51 - i2c2_gate 52 - i2c3_gate 53 - iomuxc_gate 54 - ipu_gate 55 - kpp_gate 56 - mlb_gate 57 - mshc_gate 58 - owire_gate 59 - pwm_gate 60 - rngc_gate 61 - rtc_gate 62 - rtic_gate 63 - scc_gate 64 - sdma_gate 65 - spba_gate 66 - spdif_gate 67 - ssi1_gate 68 - ssi2_gate 69 - uart1_gate 70 - uart2_gate 71 - uart3_gate 72 - usbotg_gate 73 - wdog_gate 74 - max_gate 75 - admux_gate 76 - csi_gate 77 - csi_div 78 - csi_sel 79 - iim_gate 80 - gpu2d_gate 81 - ckli_gate 82 - -Examples: - -clks: ccm@53f80000 { - compatible = "fsl,imx35-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>; - #clock-cells = <1>; -}; - -esdhc1: esdhc@53fb4000 { - compatible = "fsl,imx35-esdhc"; - reg = <0x53fb4000 0x4000>; - interrupts = <7>; - clocks = <&clks 9>, <&clks 8>, <&clks 43>; - clock-names = "ipg", "ahb", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml new file mode 100644 index 000000000000..bd871da6fc7c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx35-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX35 + +maintainers: + - Steffen Trumtrar <s.trumtrar@pengutronix.de> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. The following is a full list of i.MX35 + clocks and IDs. + + Clock ID + --------------------------- + ckih 0 + mpll 1 + ppll 2 + mpll_075 3 + arm 4 + hsp 5 + hsp_div 6 + hsp_sel 7 + ahb 8 + ipg 9 + arm_per_div 10 + ahb_per_div 11 + ipg_per 12 + uart_sel 13 + uart_div 14 + esdhc_sel 15 + esdhc1_div 16 + esdhc2_div 17 + esdhc3_div 18 + spdif_sel 19 + spdif_div_pre 20 + spdif_div_post 21 + ssi_sel 22 + ssi1_div_pre 23 + ssi1_div_post 24 + ssi2_div_pre 25 + ssi2_div_post 26 + usb_sel 27 + usb_div 28 + nfc_div 29 + asrc_gate 30 + pata_gate 31 + audmux_gate 32 + can1_gate 33 + can2_gate 34 + cspi1_gate 35 + cspi2_gate 36 + ect_gate 37 + edio_gate 38 + emi_gate 39 + epit1_gate 40 + epit2_gate 41 + esai_gate 42 + esdhc1_gate 43 + esdhc2_gate 44 + esdhc3_gate 45 + fec_gate 46 + gpio1_gate 47 + gpio2_gate 48 + gpio3_gate 49 + gpt_gate 50 + i2c1_gate 51 + i2c2_gate 52 + i2c3_gate 53 + iomuxc_gate 54 + ipu_gate 55 + kpp_gate 56 + mlb_gate 57 + mshc_gate 58 + owire_gate 59 + pwm_gate 60 + rngc_gate 61 + rtc_gate 62 + rtic_gate 63 + scc_gate 64 + sdma_gate 65 + spba_gate 66 + spdif_gate 67 + ssi1_gate 68 + ssi2_gate 69 + uart1_gate 70 + uart2_gate 71 + uart3_gate 72 + usbotg_gate 73 + wdog_gate 74 + max_gate 75 + admux_gate 76 + csi_gate 77 + csi_div 78 + csi_sel 79 + iim_gate 80 + gpu2d_gate 81 + ckli_gate 82 + +properties: + compatible: + const: fsl,imx35-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@53f80000 { + compatible = "fsl,imx35-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + esdhc@53fb4000 { + compatible = "fsl,imx35-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <7>; + clocks = <&clks 9>, <&clks 8>, <&clks 43>; + clock-names = "ipg", "ahb", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt deleted file mode 100644 index a24ca9e582d2..000000000000 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Clock bindings for Freescale i.MX5 - -Required properties: -- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53 -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h -for the full list of i.MX5 clock IDs. - -Examples (for mx53): - -clks: ccm@53fd4000{ - compatible = "fsl,imx53-ccm"; - reg = <0x53fd4000 0x4000>; - interrupts = <0 71 0x04 0 72 0x04>; - #clock-cells = <1>; -}; - -can1: can@53fc8000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; - reg = <0x53fc8000 0x4000>; - interrupts = <82>; - clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml new file mode 100644 index 000000000000..f5c2b3d7a910 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx5-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX5 + +maintainers: + - Fabio Estevam <fabio.estevam@freescale.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h + for the full list of i.MX5 clock IDs. + +properties: + compatible: + enum: + - fsl,imx53-ccm + - fsl,imx51-ccm + - fsl,imx50-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@53fd4000{ + compatible = "fsl,imx53-ccm"; + reg = <0x53fd4000 0x4000>; + interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, + <0 72 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; + + can@53fc8000 { + compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fc8000 0x4000>; + interrupts = <82>; + clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt deleted file mode 100644 index 13d36d4c6991..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Clock bindings for Freescale i.MX6 Quad - -Required properties: -- compatible: Should be "fsl,imx6q-ccm" -- reg: Address and length of the register set -- interrupts: Should contain CCM interrupt -- #clock-cells: Should be <1> - -Optional properties: -- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal - on power off. - Use this property if the SoC should be powered off by external power - management IC (PMIC) triggered via PMIC_STBY_REQ signal. - Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should - be using "syscon-poweroff" driver instead. -- clocks: list of clock specifiers, must contain an entry for each entry - in clock-names -- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h -for the full list of i.MX6 Quad and DualLite clock IDs. - -Examples: - -#include <dt-bindings/clock/imx6qdl-clock.h> - -clks: ccm@20c4000 { - compatible = "fsl,imx6q-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = <0 87 0x04 0 88 0x04>; - #clock-cells = <1>; -}; - -uart1: serial@2020000 { - compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02020000 0x4000>; - interrupts = <0 26 0x04>; - clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml new file mode 100644 index 000000000000..429e3b62b965 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 Quad + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6q-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 24m osc + - description: 32k osc + - description: ckih1 clock input + - description: anaclk1 clock input + - description: anaclk2 clock input + + clock-names: + items: + - const: osc + - const: ckil + - const: ckih1 + - const: anaclk1 + - const: anaclk2 + + fsl,pmic-stby-poweroff: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Use this property if the SoC should be powered off by external power + management IC (PMIC) triggered via PMIC_STBY_REQ signal. + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should + be using "syscon-poweroff" driver instead. + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt deleted file mode 100644 index 15e40bdf147d..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt +++ /dev/null @@ -1,10 +0,0 @@ -* Clock bindings for Freescale i.MX6 SoloLite - -Required properties: -- compatible: Should be "fsl,imx6sl-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sl-clock.h -for the full list of i.MX6 SoloLite clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml new file mode 100644 index 000000000000..135568c46350 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SoloLite + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6sl-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6sl-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, + <0 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt deleted file mode 100644 index fee849d5fdd1..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Clock bindings for Freescale i.MX6 SLL - -Required properties: -- compatible: Should be "fsl,imx6sll-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h -for the full list of i.MX6 SLL clock IDs. - -Examples: - -#include <dt-bindings/clock/imx6sll-clock.h> - -clks: clock-controller@20c4000 { - compatible = "fsl,imx6sll-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - #clock-cells = <1>; - clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; - clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; -}; - -uart1: serial@2020000 { - compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02020000 0x4000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SLL_CLK_UART1_IPG>, - <&clks IMX6SLL_CLK_UART1_SERIAL>; - clock-names = "ipg", "per"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml new file mode 100644 index 000000000000..fa55f1ce3e57 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SLL + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6sll-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt b/Documentation/devicetree/bindings/clock/imx6sx-clock.txt deleted file mode 100644 index 22362b9b7ba3..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Clock bindings for Freescale i.MX6 SoloX - -Required properties: -- compatible: Should be "fsl,imx6sx-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sx-clock.h -for the full list of i.MX6 SoloX clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml new file mode 100644 index 000000000000..982d698e8c54 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 SoloX + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6sx-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + - description: anaclk1 clock input + - description: anaclk2 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + - const: anaclk1 + - const: anaclk2 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6sx-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt deleted file mode 100644 index 571d5039f663..000000000000 --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Clock bindings for Freescale i.MX6 UltraLite - -Required properties: -- compatible: Should be "fsl,imx6ul-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h -for the full list of i.MX6 UltraLite clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml new file mode 100644 index 000000000000..3c779eea6394 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX6 UltraLite + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +properties: + compatible: + const: fsl,imx6ul-ccm + + reg: + maxItems: 1 + + interrupts: + description: CCM provides 2 interrupt requests, request 1 is to generate + interrupt for frequency or mux change, request 2 is to generate + interrupt for oscillator read or PLL lock. + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + maxItems: 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + - description: ipp_di0 clock input + - description: ipp_di1 clock input + + clock-names: + items: + - const: ckil + - const: osc + - const: ipp_di0 + - const: ipp_di1 + +required: + - compatible + - reg + - interrupts + - '#clock-cells' + - clocks + - clock-names + +examples: + # Clock Control Module node: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@20c4000 { + compatible = "fsl,imx6ul-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.txt b/Documentation/devicetree/bindings/clock/imx7d-clock.txt deleted file mode 100644 index 9d3026d81a68..000000000000 --- a/Documentation/devicetree/bindings/clock/imx7d-clock.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Clock bindings for Freescale i.MX7 Dual - -Required properties: -- compatible: Should be "fsl,imx7d-ccm" -- reg: Address and length of the register set -- #clock-cells: Should be <1> -- clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names -- clock-names: should include entries "ckil", "osc" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h -for the full list of i.MX7 Dual clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml new file mode 100644 index 000000000000..cefb61db01a8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MX7 Dual + +maintainers: + - Frank Li <Frank.Li@nxp.com> + - Anson Huang <Anson.Huang@nxp.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h + for the full list of i.MX7 Dual clock IDs. + +properties: + compatible: + const: fsl,imx7d-ccm + + reg: + maxItems: 1 + + interrupts: + items: + - description: CCM interrupt request 1 + - description: CCM interrupt request 2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: 32k osc + - description: 24m osc + + clock-names: + items: + - const: ckil + - const: osc + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt deleted file mode 100644 index 965cfa42e025..000000000000 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt +++ /dev/null @@ -1,51 +0,0 @@ -* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings - -The Low-Power Clock Gate (LPCG) modules contain a local programming -model to control the clock gates for the peripherals. An LPCG module -is used to locally gate the clocks for the associated peripheral. - -Note: -This level of clock gating is provided after the clocks are generated -by the SCU resources and clock controls. Thus even if the clock is -enabled by these control bits, it might still not be running based -on the base resource. - -Required properties: -- compatible: Should be one of: - "fsl,imx8qxp-lpcg-adma", - "fsl,imx8qxp-lpcg-conn", - "fsl,imx8qxp-lpcg-dc", - "fsl,imx8qxp-lpcg-dsp", - "fsl,imx8qxp-lpcg-gpu", - "fsl,imx8qxp-lpcg-hsio", - "fsl,imx8qxp-lpcg-img", - "fsl,imx8qxp-lpcg-lsio", - "fsl,imx8qxp-lpcg-vpu" -- reg: Address and length of the register set -- #clock-cells: Should be <1> - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. -See the full list of clock IDs from: -include/dt-bindings/clock/imx8qxp-clock.h - -Examples: - -#include <dt-bindings/clock/imx8qxp-clock.h> - -conn_lpcg: clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; - #clock-cells = <1>; -}; - -usdhc1: mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>; - clock-names = "ipg", "per", "ahb"; -}; diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml new file mode 100644 index 000000000000..33f3010f48c3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings + +maintainers: + - Aisheng Dong <aisheng.dong@nxp.com> + +description: | + The Low-Power Clock Gate (LPCG) modules contain a local programming + model to control the clock gates for the peripherals. An LPCG module + is used to locally gate the clocks for the associated peripheral. + + This level of clock gating is provided after the clocks are generated + by the SCU resources and clock controls. Thus even if the clock is + enabled by these control bits, it might still not be running based + on the base resource. + + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See the full list of clock IDs from: + include/dt-bindings/clock/imx8-clock.h + +properties: + compatible: + enum: + - fsl,imx8qxp-lpcg-adma + - fsl,imx8qxp-lpcg-conn + - fsl,imx8qxp-lpcg-dc + - fsl,imx8qxp-lpcg-dsp + - fsl,imx8qxp-lpcg-gpu + - fsl,imx8qxp-lpcg-hsio + - fsl,imx8qxp-lpcg-img + - fsl,imx8qxp-lpcg-lsio + - fsl,imx8qxp-lpcg-vpu + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-clock.h> + #include <dt-bindings/firmware/imx/rsrc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg-conn"; + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; + }; + + mmc@5b010000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b010000 0x10000>; + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + }; diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt deleted file mode 100644 index 75598e655067..000000000000 --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt +++ /dev/null @@ -1,57 +0,0 @@ -Ingenic SoC CGU binding - -The CGU in an Ingenic SoC provides all the clocks generated on-chip. It -typically includes a variety of PLLs, multiplexers, dividers & gates in order -to provide many different clock signals derived from only 2 external source -clocks. - -Required properties: -- compatible : Should be one of: - * ingenic,jz4740-cgu - * ingenic,jz4725b-cgu - * ingenic,jz4770-cgu - * ingenic,jz4780-cgu - * ingenic,x1000-cgu -- reg : The address & length of the CGU registers. -- clocks : List of phandle & clock specifiers for clocks external to the CGU. - Two such external clocks should be specified - first the external crystal - "ext" and second the RTC clock source "rtc". -- clock-names : List of name strings for the external clocks. -- #clock-cells: Should be 1. - Clock consumers specify this argument to identify a clock. The valid values - may be found in <dt-bindings/clock/<soctype>-cgu.h>. - -Example SoC include file: - -/ { - cgu: jz4740-cgu { - compatible = "ingenic,jz4740-cgu"; - reg = <0x10000000 0x100>; - #clock-cells = <1>; - }; - - uart0: serial@10030000 { - clocks = <&cgu JZ4740_CLK_UART0>; - }; -}; - -Example board file: - -/ { - ext: clock@0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - rtc: clock@1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - - &cgu { - clocks = <&ext> <&rtc>; - clock-names: "ext", "rtc"; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml new file mode 100644 index 000000000000..a952d5811823 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs CGU devicetree bindings + +description: | + The CGU in an Ingenic SoC provides all the clocks generated on-chip. It + typically includes a variety of PLLs, multiplexers, dividers & gates in order + to provide many different clock signals derived from only 2 external source + clocks. + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +select: + properties: + compatible: + contains: + enum: + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu + required: + - compatible + +properties: + $nodename: + pattern: "^clock-controller@[0-9a-f]+$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#clock-cells": + const: 1 + + ranges: true + + compatible: + items: + - enum: + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu + - const: simple-mfd + minItems: 1 + + reg: + maxItems: 1 + + clocks: + items: + - description: External oscillator clock + - description: Internal 32 kHz RTC clock + + clock-names: + items: + - const: ext + - enum: + - rtc + - osc32k # Different name, same clock + + assigned-clocks: + minItems: 1 + maxItems: 64 + + assigned-clock-parents: + minItems: 1 + maxItems: 64 + + assigned-clock-rates: + minItems: 1 + maxItems: 64 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + +patternProperties: + "^usb-phy@[a-f0-9]+$": + allOf: [ $ref: "../usb/ingenic,jz4770-phy.yaml#" ] + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/jz4770-cgu.h> + cgu: clock-controller@10000000 { + compatible = "ingenic,jz4770-cgu", "simple-mfd"; + reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; + + clocks = <&ext>, <&osc32k>; + clock-names = "ext", "osc32k"; + + #clock-cells = <1>; + + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4770-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu JZ4770_CLK_OTG_PHY>; + + vcc-supply = <&ldo5>; + + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml index a345320e0e49..a404c8fbee67 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -65,7 +65,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@100000 { compatible = "qcom,gcc-sc7180"; - reg = <0 0x00100000 0 0x1f0000>; + reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml index 36f3b3668ced..12766a866625 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml @@ -63,7 +63,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@100000 { compatible = "qcom,gcc-sm8150"; - reg = <0 0x00100000 0 0x1f0000>; + reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; clock-names = "bi_tcxo", "sleep_clk"; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index 2c40a8aa9815..a5766ff89082 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -61,7 +61,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@100000 { compatible = "qcom,gcc-sm8250"; - reg = <0 0x00100000 0 0x1f0000>; + reg = <0x00100000 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; clock-names = "bi_tcxo", "sleep_clk"; diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index f684fe67db84..acc31b3991bd 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -15,15 +15,15 @@ description: | power domains. properties: - compatible : + compatible: enum: - - qcom,mmcc-apq8064 - - qcom,mmcc-apq8084 - - qcom,mmcc-msm8660 - - qcom,mmcc-msm8960 - - qcom,mmcc-msm8974 - - qcom,mmcc-msm8996 - - qcom,mmcc-msm8998 + - qcom,mmcc-apq8064 + - qcom,mmcc-apq8084 + - qcom,mmcc-msm8660 + - qcom,mmcc-msm8960 + - qcom,mmcc-msm8974 + - qcom,mmcc-msm8996 + - qcom,mmcc-msm8998 clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml index 58cdfd5924d3..e94847f92770 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml @@ -66,7 +66,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@af00000 { compatible = "qcom,sc7180-dispcc"; - reg = <0 0x0af00000 0 0x200000>; + reg = <0x0af00000 0x200000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&dsi_phy 0>, diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml index 8635e35fd3f0..fe08461fce05 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml @@ -60,7 +60,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@5090000 { compatible = "qcom,sc7180-gpucc"; - reg = <0 0x05090000 0 0x9000>; + reg = <0x05090000 0x9000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml index 0dd5d25ae7d7..970030986a86 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml @@ -50,7 +50,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sc7180.h> clock-controller@41a8000 { compatible = "qcom,sc7180-mss"; - reg = <0 0x041a8000 0 0x8000>; + reg = <0x041a8000 0x8000>; clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>, <&gcc GCC_MSS_NAV_AXI_CLK>, <&gcc GCC_MSS_CFG_AHB_CLK>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml index 0071b9701960..2feea2b91aa9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml @@ -55,7 +55,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@ab00000 { compatible = "qcom,sc7180-videocc"; - reg = <0 0x0ab00000 0 0x10000>; + reg = <0x0ab00000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml index ad47d747a3e4..4a3be733d042 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml @@ -75,7 +75,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; - reg = <0 0x0af00000 0 0x10000>; + reg = <0x0af00000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml index 7a052ac5dc00..8a0c576ba8b3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml @@ -60,7 +60,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@5090000 { compatible = "qcom,sdm845-gpucc"; - reg = <0 0x05090000 0 0x9000>; + reg = <0x05090000 0x9000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPU_GPLL0_CLK_SRC>, <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml index 2a6a81ab0318..f7a0cf53d5f0 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml @@ -55,7 +55,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; - reg = <0 0x0ab00000 0 0x10000>; + reg = <0x0ab00000 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index bb3a78d8105e..14ae4ea3bc20 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -76,29 +76,24 @@ examples: - | ap_clk: clock-controller@21500000 { compatible = "sprd,sc9863a-ap-clk"; - reg = <0 0x21500000 0 0x1000>; + reg = <0x21500000 0x1000>; clocks = <&ext_26m>, <&ext_32k>; clock-names = "ext-26m", "ext-32k"; #clock-cells = <1>; }; - | - soc { - #address-cells = <2>; - #size-cells = <2>; - - ap_ahb_regs: syscon@20e00000 { - compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; - reg = <0 0x20e00000 0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0x20e00000 0x4000>; - - apahb_gate: apahb-gate@0 { - compatible = "sprd,sc9863a-apahb-gate"; - reg = <0x0 0x1020>; - #clock-cells = <1>; - }; + syscon@20e00000 { + compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd"; + reg = <0x20e00000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x20e00000 0x4000>; + + apahb_gate: apahb-gate@0 { + compatible = "sprd,sc9863a-apahb-gate"; + reg = <0x0 0x1020>; + #clock-cells = <1>; }; }; |