diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input/touchscreen')
5 files changed, 157 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml new file mode 100644 index 000000000000..8c73e5264312 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma140.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress CY8CTMA140 series touchscreen controller bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: cypress,cy8ctma140 + + reg: + const: 0x20 + + clock-frequency: + description: I2C client clock frequency, defined for host + minimum: 100000 + maximum: 400000 + + interrupts: + maxItems: 1 + + vcpin-supply: + description: Analog power supply regulator on VCPIN pin + + vdd-supply: + description: Digital power supply regulator on VDD pin + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + touchscreen-max-pressure: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - touchscreen-size-x + - touchscreen-size-y + - touchscreen-max-pressure + +examples: +- | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@20 { + compatible = "cypress,cy8ctma140"; + reg = <0x20>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + touchscreen-max-pressure = <255>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux2_reg>; + vcpin-supply = <&ab8500_ldo_aux2_reg>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 383d64a91854..024b262a2ef7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -42,7 +42,7 @@ properties: - focaltech,ft6236 reg: - const: 0x38 + maxItems: 1 interrupts: maxItems: 1 @@ -61,33 +61,29 @@ properties: gain: description: Allows setting the sensitivity in the range from 0 to 31. Note that lower values indicate higher sensitivity. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 31 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 offset: description: Allows setting the edge compensation in the range from 0 to 31. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 31 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 offset-x: description: Same as offset, but applies only to the horizontal position. Range from 0 to 80, only supported by evervision,ev-ft5726 devices. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 80 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 offset-y: description: Same as offset, but applies only to the vertical position. Range from 0 to 80, only supported by evervision,ev-ft5726 devices. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 80 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 touchscreen-size-x: true touchscreen-size-y: true diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml new file mode 100644 index 000000000000..a792d6377b1d --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Elantech I2C Touchscreen + +maintainers: + - David Heidelberg <david@ixit.cz> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - elan,ektf3624 + - elan,ekth3500 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: + type: boolean + description: touchscreen can be used as a wakeup source. + + reset-gpios: + description: reset gpio the chip is connected to. + + vcc33-supply: + description: a phandle for the regulator supplying 3.3V power. + + vccio-supply: + description: a phandle for the regulator supplying IO power. + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + + interrupt-parent = <&gpio4>; + interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index c8ea9434c9cc..e81cfa56f25a 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -63,7 +63,7 @@ required: - interrupts examples: -- | + - | i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt index 2cd954051d29..707234cfd7e6 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt @@ -1,9 +1,10 @@ -* MELFAS MMS114/MMS152 touchscreen controller +* MELFAS MMS114/MMS152/MMS345L touchscreen controller Required properties: - compatible: should be one of: - "melfas,mms114" - "melfas,mms152" + - "melfas,mms345l" - reg: I2C address of the chip - interrupts: interrupt to which the chip is connected - touchscreen-size-x: See [1] |