1 files changed, 0 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt
deleted file mode 100644
index 3cee372c5742..000000000000
--- a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Socionext UniPhier PCIe PHY bindings
-
-This describes the devicetree bindings for PHY interface built into
-PCIe controller implemented on Socionext UniPhier SoCs.
-
-Required properties:
-- compatible: Should contain one of the following:
-    "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY
-    "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY
-    "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY
-- reg: Specifies offset and length of the register set for the device.
-- #phy-cells: Must be zero.
-- clocks: A list of phandles to the clock gate for PCIe glue layer
-	including this phy.
-- clock-names: For Pro5 only, should contain the following:
-    "gio", "link" - for Pro5 SoC
-- resets: A list of phandles to the reset line for PCIe glue layer
-	including this phy.
-- reset-names: For Pro5 only, should contain the following:
-    "gio", "link" - for Pro5 SoC
-
-Optional properties:
-- socionext,syscon: A phandle to system control to set configurations
-	for phy.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-	pcie_phy: phy@66038000 {
-		compatible = "socionext,uniphier-ld20-pcie-phy";
-		reg = <0x66038000 0x4000>;
-		#phy-cells = <0>;
-		clocks = <&sys_clk 24>;
-		resets = <&sys_rst 24>;
-		socionext,syscon = <&soc_glue>;
-	};