1 files changed, 0 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
deleted file mode 100644
index c7dfb7cecf40..000000000000
--- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
-
-Required properties:
- - compatible: "active-semi,act8945a-charger".
- - active-semi,chglev-gpios: charge current level phandle with args
-   as described in ../gpio/gpio.txt.
- - active-semi,lbo-gpios: specify the low battery voltage detect phandle
-   with args as as described in ../gpio/gpio.txt.
- - interrupts: <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.
-
-Optional properties:
- - active-semi,input-voltage-threshold-microvolt: unit: mV;
-   Specifies the charger's input over-voltage threshold value;
-   The value can be: 6600, 7000, 7500, 8000; default: 6600
- - active-semi,precondition-timeout: unit: minutes;
-   Specifies the charger's PRECONDITION safety timer setting value;
-   The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
-   default: 40.
- - active-semi,total-timeout: unit: hours;
-   Specifies the charger's total safety timer setting value;
-   The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
-   default: 3.
-
-Example:
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		charger {
-			compatible = "active-semi,act8945a-charger";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
-			interrupt-parent = <&pioA>;
-			interrupts = <45 GPIO_ACTIVE_LOW>;
-
-			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-			active-semi,input-voltage-threshold-microvolt = <6600>;
-			active-semi,precondition-timeout = <40>;
-			active-semi,total-timeout = <3>;
-		};
-	};