diff options
Diffstat (limited to 'Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 20 |
1 files changed, 18 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt index d78d4a8fb868..3208adb3e52e 100644 --- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt @@ -20,7 +20,7 @@ Optional properties: This is useful in situations where another watchdog engine on chip is to perform the reset. - If 'aspeed,reset-type=' is not specfied the default is to enable system + If 'aspeed,reset-type=' is not specified the default is to enable system reset. Reset types: @@ -47,7 +47,15 @@ Optional properties for AST2500-compatible watchdogs: is configured as push-pull, then set the pulse polarity to active-high. The default is active-low. -Example: +Optional properties for AST2500- and AST2600-compatible watchdogs: + - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if + the watchdog timer expires. On AST2500 this should be a + single word defined using the AST2500_WDT_RESET_* macros; + on AST2600 this should be a two-word array with the first + word defined using the AST2600_WDT_RESET1_* macros and the + second word defined using the AST2600_WDT_RESET2_* macros. + +Examples: wdt1: watchdog@1e785000 { compatible = "aspeed,ast2400-wdt"; @@ -55,3 +63,11 @@ Example: aspeed,reset-type = "system"; aspeed,external-signal; }; + + #include <dt-bindings/watchdog/aspeed-wdt.h> + wdt2: watchdog@1e785040 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785040 0x40>; + aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT + (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>; + }; |