diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
7 files changed, 245 insertions, 52 deletions
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml new file mode 100644 index 000000000000..7a386a5b8fcb --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson SDHC controller Device Tree Bindings + +allOf: + - $ref: "mmc-controller.yaml" + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +description: | + The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC + card interface with 1/4/8-bit bus width. + It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock). + +properties: + compatible: + items: + - enum: + - amlogic,meson8-sdhc + - amlogic,meson8b-sdhc + - amlogic,meson8m2-sdhc + - const: amlogic,meson-mx-sdhc + + reg: + minItems: 1 + + interrupts: + minItems: 1 + + clocks: + minItems: 5 + + clock-names: + items: + - const: clkin0 + - const: clkin1 + - const: clkin2 + - const: clkin3 + - const: pclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sdhc: mmc@8e00 { + compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc"; + reg = <0x8e00 0x42>; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&fclk_div4>, + <&fclk_div3>, + <&fclk_div5>, + <&sdhc_pclk>; + clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk"; + }; diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 428685eb2ded..f29bf7dd2ece 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -18,12 +18,21 @@ Required Properties: - "xlnx,zynqmp-8.9a": ZynqMP SDHCI 8.9a PHY For this device it is strongly suggested to include clock-output-names and #clock-cells. + - "xlnx,versal-8.9a": Versal SDHCI 8.9a PHY + For this device it is strongly suggested to include clock-output-names and + #clock-cells. - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY Note: This binding has been deprecated and moved to [5]. - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY For this device it is strongly suggested to include arasan,soc-ctl-syscon. - "intel,lgm-sdhci-5.1-sdxc", "arasan,sdhci-5.1": Intel LGM SDXC PHY For this device it is strongly suggested to include arasan,soc-ctl-syscon. + - "intel,keembay-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel Keem Bay eMMC + For this device it is strongly suggested to include arasan,soc-ctl-syscon. + - "intel,keembay-sdhci-5.1-sd": Intel Keem Bay SD controller + For this device it is strongly suggested to include arasan,soc-ctl-syscon. + - "intel,keembay-sdhci-5.1-sdio": Intel Keem Bay SDIO controller + For this device it is strongly suggested to include arasan,soc-ctl-syscon. [5] Documentation/devicetree/bindings/mmc/sdhci-am654.txt @@ -104,6 +113,18 @@ Example: clk-phase-sd-hs = <63>, <72>; }; + sdhci: mmc@f1040000 { + compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a"; + interrupt-parent = <&gic>; + interrupts = <0 126 4>; + reg = <0x0 0xf1040000 0x0 0x10000>; + clocks = <&clk200>, <&clk200>; + clock-names = "clk_xin", "clk_ahb"; + clock-output-names = "clk_out_sd0", "clk_in_sd0"; + #clock-cells = <1>; + clk-phase-sd-hs = <132>, <60>; + }; + emmc: sdhci@ec700000 { compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1"; reg = <0xec700000 0x300>; @@ -133,3 +154,39 @@ Example: phy-names = "phy_arasan"; arasan,soc-ctl-syscon = <&sysconf>; }; + + mmc: mmc@33000000 { + compatible = "intel,keembay-sdhci-5.1-emmc", "arasan,sdhci-5.1"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x33000000 0x0 0x300>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>, + <&scmi_clk KEEM_BAY_PSS_EMMC>; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + assigned-clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>; + assigned-clock-rates = <200000000>; + clock-output-names = "emmc_cardclock"; + #clock-cells = <0>; + arasan,soc-ctl-syscon = <&mmc_phy_syscon>; + }; + + sd0: mmc@31000000 { + compatible = "intel,keembay-sdhci-5.1-sd"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x31000000 0x0 0x300>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD0>, + <&scmi_clk KEEM_BAY_PSS_SD0>; + arasan,soc-ctl-syscon = <&sd0_phy_syscon>; + }; + + sd1: mmc@32000000 { + compatible = "intel,keembay-sdhci-5.1-sdio"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x32000000 0x0 0x300>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD1>, + <&scmi_clk KEEM_BAY_PSS_SD1>; + arasan,soc-ctl-syscon = <&sd1_phy_syscon>; + }; diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt index c064af5838aa..291532ac0446 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt @@ -11,6 +11,7 @@ Required properties: - "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs + - "renesas,mmcif-r8a7742" for the MMCIF found in r8a7742 SoCs - "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs - "renesas,mmcif-r8a7744" for the MMCIF found in r8a7744 SoCs - "renesas,mmcif-r8a7745" for the MMCIF found in r8a7745 SoCs @@ -24,8 +25,8 @@ Required properties: - interrupts: Some SoCs have only 1 shared interrupt, while others have either 2 or 3 individual interrupts (error, int, card detect). Below is the number of interrupts for each SoC: - 1: r8a73a4, r8a7743, r8a7744, r8a7745, r8a7778, r8a7790, r8a7791, r8a7793, - r8a7794 + 1: r8a73a4, r8a7742, r8a7743, r8a7744, r8a7745, r8a7778, r8a7790, r8a7791, + r8a7793, r8a7794 2: r8a7740, sh73a0 3: r7s72100 diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt index e6cc47844207..0ca9a622cce0 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt @@ -7,6 +7,7 @@ Required properties: "renesas,sdhi-r7s9210" - SDHI IP on R7S9210 SoC "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC + "renesas,sdhi-r8a7742" - SDHI IP on R8A7742 SoC "renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC "renesas,sdhi-r8a7744" - SDHI IP on R8A7744 SoC "renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index 5445931c5ab9..b8e1d2b7aea9 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -17,6 +17,7 @@ Required properties: "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4" "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4" "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4" + "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5" "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5" "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5" "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; @@ -46,6 +47,13 @@ Required properties: "cal" - reference clock for RCLK delay calibration (optional) "sleep" - sleep clock for RCLK delay calibration (optional) +- qcom,ddr-config: Certain chipsets and platforms require particular settings + for the DDR_CONFIG register. Use this field to specify the register + value as per the Hardware Programming Guide. + +- qcom,dll-config: Chipset and Platform specific value. Use this field to + specify the DLL_CONFIG register value as per Hardware Programming Guide. + Example: sdhc_1: sdhci@f9824900 { @@ -63,6 +71,9 @@ Example: clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; clock-names = "core", "iface"; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; }; sdhc_2: sdhci@f98a4900 { @@ -80,4 +91,7 @@ Example: clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; clock-names = "core", "iface"; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt deleted file mode 100644 index 3d1b449d6097..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Marvell sdhci-pxa v2/v3 controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers. - -Required properties: -- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or - "marvell,armada-380-sdhci". -- reg: - * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for - the SDHCI registers. - - * for "marvell,armada-380-sdhci", three register areas. The first - one for the SDHCI registers themselves, the second one for the - AXI/Mbus bridge registers of the SDHCI unit, the third one for the - SDIO3 Configuration register -- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory - for "marvell,armada-380-sdhci" -- clocks: Array of clocks required for SDHCI; requires at least one for - I/O clock. -- clock-names: Array of names corresponding to clocks property; shall be - "io" for I/O clock and "core" for optional core clock. - -Optional properties: -- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning. - -Example: - -sdhci@d4280800 { - compatible = "mrvl,pxav3-mmc"; - reg = <0xd4280800 0x800>; - bus-width = <8>; - interrupts = <27>; - clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>; - clock-names = "io", "core"; - non-removable; - mrvl,clk-delay-cycles = <31>; -}; - -sdhci@d8000 { - compatible = "marvell,armada-380-sdhci"; - reg-names = "sdhci", "mbus", "conf-sdio3"; - reg = <0xd8000 0x1000>, - <0xdc000 0x100>; - <0x18454 0x4>; - interrupts = <0 25 0x4>; - clocks = <&gateclk 17>; - clock-names = "io"; - mrvl,clk-delay-cycles = <0x1F>; -}; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml new file mode 100644 index 000000000000..a58715c860b7 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell PXA SDHCI v2/v3 bindings + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +allOf: + - $ref: mmc-controller.yaml# + - if: + properties: + compatible: + contains: + const: marvell,armada-380-sdhci + then: + properties: + regs: + minItems: 3 + reg-names: + minItems: 3 + required: + - reg-names + else: + properties: + regs: + maxItems: 1 + reg-names: + maxItems: 1 + +properties: + compatible: + enum: + - mrvl,pxav2-mmc + - mrvl,pxav3-mmc + - marvell,armada-380-sdhci + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + items: + - const: sdhci + - const: mbus + - const: conf-sdio3 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: io + - const: core + + mrvl,clk-delay-cycles: + description: Specify a number of cycles to delay for tuning. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/berlin2.h> + mmc@d4280800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280800 0x800>; + bus-width = <8>; + interrupts = <27>; + clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>; + clock-names = "io", "core"; + non-removable; + mrvl,clk-delay-cycles = <31>; + }; + - | + mmc@d8000 { + compatible = "marvell,armada-380-sdhci"; + reg-names = "sdhci", "mbus", "conf-sdio3"; + reg = <0xd8000 0x1000>, + <0xdc000 0x100>, + <0x18454 0x4>; + interrupts = <0 25 0x4>; + clocks = <&gateclk 17>; + clock-names = "io"; + mrvl,clk-delay-cycles = <0x1F>; + }; + +... |