diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
3 files changed, 8 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt index e77b08ebcd06..ee1754739b4b 100644 --- a/Documentation/devicetree/bindings/dma/fsl-edma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt @@ -10,7 +10,8 @@ Required properties: - compatible : - "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC - "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp - - "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC + - "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the + LS1028A SoC. - reg : Specifies base physical address(s) and size of the eDMA registers. The 1st region is eDMA control register's address and size. The 2nd and the 3rd regions are programmable channel multiplexing diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml index 86cfb599256e..371f18773198 100644 --- a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml +++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml @@ -22,9 +22,7 @@ properties: const: socionext,uniphier-xdmac reg: - items: - - description: XDMAC base register region (offset and length) - - description: XDMAC extension register region (offset and length) + maxItems: 1 interrupts: maxItems: 1 @@ -49,12 +47,13 @@ required: - reg - interrupts - "#dma-cells" + - dma-channels examples: - | xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; - reg = <0x5fc10000 0x1000>, <0x5fc20000 0x800>; + reg = <0x5fc10000 0x5300>; interrupts = <0 188 4>; #dma-cells = <2>; dma-channels = <16>; diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt index 5201bc15fdd6..cfd1afdc6e94 100644 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt @@ -110,6 +110,9 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0: #size-cells = <0>; ports { + #address-cells = <1>; + #size-cells = <0>; + port0@0 { reg = <0>; label = "lan1"; |