diff options
Diffstat (limited to 'Documentation/media/v4l-drivers/bttv.rst')
-rw-r--r-- | Documentation/media/v4l-drivers/bttv.rst | 1926 |
1 files changed, 0 insertions, 1926 deletions
diff --git a/Documentation/media/v4l-drivers/bttv.rst b/Documentation/media/v4l-drivers/bttv.rst deleted file mode 100644 index f956ee264099..000000000000 --- a/Documentation/media/v4l-drivers/bttv.rst +++ /dev/null @@ -1,1926 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -The bttv driver -=============== - -Release notes for bttv ----------------------- - -You'll need at least these config options for bttv: - -.. code-block:: none - - CONFIG_I2C=m - CONFIG_I2C_ALGOBIT=m - CONFIG_VIDEO_DEV=m - -The latest bttv version is available from http://bytesex.org/bttv/ - - -Make bttv work with your card ------------------------------ - -Just try "modprobe bttv" and see if that works. - -If it doesn't bttv likely could not autodetect your card and needs some -insmod options. The most important insmod option for bttv is "card=n" -to select the correct card type. If you get video but no sound you've -very likely specified the wrong (or no) card type. A list of supported -cards is in CARDLIST.bttv - -If bttv takes very long to load (happens sometimes with the cheap -cards which have no tuner), try adding this to your modules.conf: - -.. code-block:: none - - options i2c-algo-bit bit_test=1 - -For the WinTV/PVR you need one firmware file from the driver CD: -hcwamc.rbf. The file is in the pvr45xxx.exe archive (self-extracting -zip file, unzip can unpack it). Put it into the /etc/pvr directory or -use the firm_altera=<path> insmod option to point the driver to the -location of the file. - -If your card isn't listed in CARDLIST.bttv or if you have trouble making -audio work, you should read the Sound-FAQ. - - -Autodetecting cards -------------------- - -bttv uses the PCI Subsystem ID to autodetect the card type. lspci lists -the Subsystem ID in the second line, looks like this: - -.. code-block:: none - - 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) - Subsystem: Hauppauge computer works Inc. WinTV/GO - Flags: bus master, medium devsel, latency 32, IRQ 5 - Memory at e2000000 (32-bit, prefetchable) [size=4K] - -only bt878-based cards can have a subsystem ID (which does not mean -that every card really has one). bt848 cards can't have a Subsystem -ID and therefore can't be autodetected. There is a list with the ID's -in bttv-cards.c (in case you are intrested or want to mail patches -with updates). - - -Still doesn't work? -------------------- - -I do NOT have a lab with 30+ different grabber boards and a -PAL/NTSC/SECAM test signal generator at home, so I often can't -reproduce your problems. This makes debugging very difficult for me. -If you have some knowledge and spare time, please try to fix this -yourself (patches very welcome of course...) You know: The linux -slogan is "Do it yourself". - -There is a mailing list at -http://vger.kernel.org/vger-lists.html#linux-media - -If you have trouble with some specific TV card, try to ask there -instead of mailing me directly. The chance that someone with the -same card listens there is much higher... - -For problems with sound: There are a lot of different systems used -for TV sound all over the world. And there are also different chips -which decode the audio signal. Reports about sound problems ("stereo -doesn't work") are pretty useless unless you include some details -about your hardware and the TV sound scheme used in your country (or -at least the country you are living in). - -Modprobe options ----------------- - -Note: "modinfo <module>" prints various information about a kernel -module, among them a complete and up-to-date list of insmod options. -This list tends to be outdated because it is updated manually ... - -========================================================================== - -bttv.o - -.. code-block:: none - - the bt848/878 (grabber chip) driver - - insmod args: - card=n card type, see CARDLIST for a list. - tuner=n tuner type, see CARDLIST for a list. - radio=0/1 card supports radio - pll=0/1/2 pll settings - 0: don't use PLL - 1: 28 MHz crystal installed - 2: 35 MHz crystal installed - - triton1=0/1 for Triton1 (+others) compatibility - vsfx=0/1 yet another chipset bug compatibility bit - see README.quirks for details on these two. - - bigendian=n Set the endianness of the gfx framebuffer. - Default is native endian. - fieldnr=0/1 Count fields. Some TV descrambling software - needs this, for others it only generates - 50 useless IRQs/sec. default is 0 (off). - autoload=0/1 autoload helper modules (tuner, audio). - default is 1 (on). - bttv_verbose=0/1/2 verbose level (at insmod time, while - looking at the hardware). default is 1. - bttv_debug=0/1 debug messages (for capture). - default is 0 (off). - irq_debug=0/1 irq handler debug messages. - default is 0 (off). - gbuffers=2-32 number of capture buffers for mmap'ed capture. - default is 4. - gbufsize= size of capture buffers. default and - maximum value is 0x208000 (~2MB) - no_overlay=0 Enable overlay on broken hardware. There - are some chipsets (SIS for example) which - are known to have problems with the PCI DMA - push used by bttv. bttv will disable overlay - by default on this hardware to avoid crashes. - With this insmod option you can override this. - no_overlay=1 Disable overlay. It should be used by broken - hardware that doesn't support PCI2PCI direct - transfers. - automute=0/1 Automatically mutes the sound if there is - no TV signal, on by default. You might try - to disable this if you have bad input signal - quality which leading to unwanted sound - dropouts. - chroma_agc=0/1 AGC of chroma signal, off by default. - adc_crush=0/1 Luminance ADC crush, on by default. - i2c_udelay= Allow reduce I2C speed. Default is 5 usecs - (meaning 66,67 Kbps). The default is the - maximum supported speed by kernel bitbang - algorithm. You may use lower numbers, if I2C - messages are lost (16 is known to work on - all supported cards). - - bttv_gpio=0/1 - gpiomask= - audioall= - audiomux= - See Sound-FAQ for a detailed description. - - remap, card, radio and pll accept up to four comma-separated arguments - (for multiple boards). - -tuner.o - -.. code-block:: none - - The tuner driver. You need this unless you want to use only - with a camera or external tuner ... - - insmod args: - debug=1 print some debug info to the syslog - type=n type of the tuner chip. n as follows: - see CARDLIST for a complete list. - pal=[bdgil] select PAL variant (used for some tuners - only, important for the audio carrier). - -tvaudio.o - -.. code-block:: none - - new, experimental module which is supported to provide a single - driver for all simple i2c audio control chips (tda/tea*). - - insmod args: - tda8425 = 1 enable/disable the support for the - tda9840 = 1 various chips. - tda9850 = 1 The tea6300 can't be autodetected and is - tda9855 = 1 therefore off by default, if you have - tda9873 = 1 this one on your card (STB uses these) - tda9874a = 1 you have to enable it explicitly. - tea6300 = 0 The two tda985x chips use the same i2c - tea6420 = 1 address and can't be disturgished from - pic16c54 = 1 each other, you might have to disable - the wrong one. - debug = 1 print debug messages - - insmod args for tda9874a: - tda9874a_SIF=1/2 select sound IF input pin (1 or 2) - (default is pin 1) - tda9874a_AMSEL=0/1 auto-mute select for NICAM (default=0) - Please read note 3 below! - tda9874a_STD=n select TV sound standard (0..8): - 0 - A2, B/G - 1 - A2, M (Korea) - 2 - A2, D/K (1) - 3 - A2, D/K (2) - 4 - A2, D/K (3) - 5 - NICAM, I - 6 - NICAM, B/G - 7 - NICAM, D/K (default) - 8 - NICAM, L - - Note 1: tda9874a supports both tda9874h (old) and tda9874a (new) chips. - Note 2: tda9874h/a and tda9875 (which is supported separately by - tda9875.o) use the same i2c address so both modules should not be - used at the same time. - Note 3: Using tda9874a_AMSEL option depends on your TV card design! - AMSEL=0: auto-mute will switch between NICAM sound - and the sound on 1st carrier (i.e. FM mono or AM). - AMSEL=1: auto-mute will switch between NICAM sound - and the analog mono input (MONOIN pin). - If tda9874a decoder on your card has MONOIN pin not connected, then - use only tda9874_AMSEL=0 or don't specify this option at all. - For example: - card=65 (FlyVideo 2000S) - set AMSEL=1 or AMSEL=0 - card=72 (Prolink PV-BT878P rev.9B) - set AMSEL=0 only - -msp3400.o - -.. code-block:: none - - The driver for the msp34xx sound processor chips. If you have a - stereo card, you probably want to insmod this one. - - insmod args: - debug=1/2 print some debug info to the syslog, - 2 is more verbose. - simple=1 Use the "short programming" method. Newer - msp34xx versions support this. You need this - for dbx stereo. Default is on if supported by - the chip. - once=1 Don't check the TV-stations Audio mode - every few seconds, but only once after - channel switches. - amsound=1 Audio carrier is AM/NICAM at 6.5 Mhz. This - should improve things for french people, the - carrier autoscan seems to work with FM only... - -tea6300.o - OBSOLETE (use tvaudio instead) - -.. code-block:: none - - The driver for the tea6300 fader chip. If you have a stereo - card and the msp3400.o doesn't work, you might want to try this - one. This chip is seen on most STB TV/FM cards (usually from - Gateway OEM sold surplus on auction sites). - - insmod args: - debug=1 print some debug info to the syslog. - -tda8425.o - OBSOLETE (use tvaudio instead) - -.. code-block:: none - - The driver for the tda8425 fader chip. This driver used to be - part of bttv.c, so if your sound used to work but does not - anymore, try loading this module. - - insmod args: - debug=1 print some debug info to the syslog. - -tda985x.o - OBSOLETE (use tvaudio instead) - -.. code-block:: none - - The driver for the tda9850/55 audio chips. - - insmod args: - debug=1 print some debug info to the syslog. - chip=9850/9855 set the chip type. - - -If the box freezes hard with bttv ---------------------------------- - -It might be a bttv driver bug. It also might be bad hardware. It also -might be something else ... - -Just mailing me "bttv freezes" isn't going to help much. This README -has a few hints how you can help to pin down the problem. - - -bttv bugs -~~~~~~~~~ - -If some version works and another doesn't it is likely to be a driver -bug. It is very helpful if you can tell where exactly it broke -(i.e. the last working and the first broken version). - -With a hard freeze you probably doesn't find anything in the logfiles. -The only way to capture any kernel messages is to hook up a serial -console and let some terminal application log the messages. /me uses -screen. See Documentation/admin-guide/serial-console.rst for details on setting -up a serial console. - -Read Documentation/admin-guide/bug-hunting.rst to learn how to get any useful -information out of a register+stack dump printed by the kernel on -protection faults (so-called "kernel oops"). - -If you run into some kind of deadlock, you can try to dump a call trace -for each process using sysrq-t (see Documentation/admin-guide/sysrq.rst). -This way it is possible to figure where *exactly* some process in "D" -state is stuck. - -I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid -for some people. Thus probably a small buglet left somewhere in bttv -0.7.x. I have no idea where exactly, it works stable for me and a lot of -other people. But in case you have problems with the 0.7.x versions you -can give 0.8.x a try ... - - -hardware bugs -~~~~~~~~~~~~~ - -Some hardware can't deal with PCI-PCI transfers (i.e. grabber => vga). -Sometimes problems show up with bttv just because of the high load on -the PCI bus. The bt848/878 chips have a few workarounds for known -incompatibilities, see README.quirks. - -Some folks report that increasing the pci latency helps too, -althrought I'm not sure whenever this really fixes the problems or -only makes it less likely to happen. Both bttv and btaudio have a -insmod option to set the PCI latency of the device. - -Some mainboard have problems to deal correctly with multiple devices -doing DMA at the same time. bttv + ide seems to cause this sometimes, -if this is the case you likely see freezes only with video and hard disk -access at the same time. Updating the IDE driver to get the latest and -greatest workarounds for hardware bugs might fix these problems. - - -other -~~~~~ - -If you use some binary-only yunk (like nvidia module) try to reproduce -the problem without. - -IRQ sharing is known to cause problems in some cases. It works just -fine in theory and many configurations. Neverless it might be worth a -try to shuffle around the PCI cards to give bttv another IRQ or make -it share the IRQ with some other piece of hardware. IRQ sharing with -VGA cards seems to cause trouble sometimes. I've also seen funny -effects with bttv sharing the IRQ with the ACPI bridge (and -apci-enabled kernel). - -Bttv quirks ------------ - -Below is what the bt878 data book says about the PCI bug compatibility -modes of the bt878 chip. - -The triton1 insmod option sets the EN_TBFX bit in the control register. -The vsfx insmod option does the same for EN_VSFX bit. If you have -stability problems you can try if one of these options makes your box -work solid. - -drivers/pci/quirks.c knows about these issues, this way these bits are -enabled automagically for known-buggy chipsets (look at the kernel -messages, bttv tells you). - -Normal PCI Mode -~~~~~~~~~~~~~~~ - -The PCI REQ signal is the logical-or of the incoming function requests. -The inter-nal GNT[0:1] signals are gated asynchronously with GNT and -demultiplexed by the audio request signal. Thus the arbiter defaults to -the video function at power-up and parks there during no requests for -bus access. This is desirable since the video will request the bus more -often. However, the audio will have highest bus access priority. Thus -the audio will have first access to the bus even when issuing a request -after the video request but before the PCI external arbiter has granted -access to the Bt879. Neither function can preempt the other once on the -bus. The duration to empty the entire video PCI FIFO onto the PCI bus is -very short compared to the bus access latency the audio PCI FIFO can -tolerate. - - -430FX Compatibility Mode -~~~~~~~~~~~~~~~~~~~~~~~~ - -When using the 430FX PCI, the following rules will ensure -compatibility: - - (1) Deassert REQ at the same time as asserting FRAME. - (2) Do not reassert REQ to request another bus transaction until after - finish-ing the previous transaction. - -Since the individual bus masters do not have direct control of REQ, a -simple logical-or of video and audio requests would violate the rules. -Thus, both the arbiter and the initiator contain 430FX compatibility -mode logic. To enable 430FX mode, set the EN_TBFX bit as indicated in -Device Control Register on page 104. - -When EN_TBFX is enabled, the arbiter ensures that the two compatibility -rules are satisfied. Before GNT is asserted by the PCI arbiter, this -internal arbiter may still logical-or the two requests. However, once -the GNT is issued, this arbiter must lock in its decision and now route -only the granted request to the REQ pin. The arbiter decision lock -happens regardless of the state of FRAME because it does not know when -FRAME will be asserted (typically - each initiator will assert FRAME on -the cycle following GNT). When FRAME is asserted, it is the initiator s -responsibility to remove its request at the same time. It is the -arbiters responsibility to allow this request to flow through to REQ and -not allow the other request to hold REQ asserted. The decision lock may -be removed at the end of the transaction: for example, when the bus is -idle (FRAME and IRDY). The arbiter decision may then continue -asynchronously until GNT is again asserted. - - -Interfacing with Non-PCI 2.1 Compliant Core Logic -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -A small percentage of core logic devices may start a bus transaction -during the same cycle that GNT is de-asserted. This is non PCI 2.1 -compliant. To ensure compatibility when using PCs with these PCI -controllers, the EN_VSFX bit must be enabled (refer to Device Control -Register on page 104). When in this mode, the arbiter does not pass GNT -to the internal functions unless REQ is asserted. This prevents a bus -transaction from starting the same cycle as GNT is de-asserted. This -also has the side effect of not being able to take advantage of bus -parking, thus lowering arbitration performance. The Bt879 drivers must -query for these non-compliant devices, and set the EN_VSFX bit only if -required. - -bttv and sound mini howto -------------------------- - -There are a lot of different bt848/849/878/879 based boards available. -Making video work often is not a big deal, because this is handled -completely by the bt8xx chip, which is common on all boards. But -sound is handled in slightly different ways on each board. - -To handle the grabber boards correctly, there is a array tvcards[] in -bttv-cards.c, which holds the information required for each board. -Sound will work only, if the correct entry is used (for video it often -makes no difference). The bttv driver prints a line to the kernel -log, telling which card type is used. Like this one: - -.. code-block:: none - - bttv0: model: BT848(Hauppauge old) [autodetected] - -You should verify this is correct. If it isn't, you have to pass the -correct board type as insmod argument, "insmod bttv card=2" for -example. The file CARDLIST has a list of valid arguments for card. -If your card isn't listed there, you might check the source code for -new entries which are not listed yet. If there isn't one for your -card, you can check if one of the existing entries does work for you -(just trial and error...). - -Some boards have an extra processor for sound to do stereo decoding -and other nice features. The msp34xx chips are used by Hauppauge for -example. If your board has one, you might have to load a helper -module like msp3400.o to make sound work. If there isn't one for the -chip used on your board: Bad luck. Start writing a new one. Well, -you might want to check the video4linux mailing list archive first... - -Of course you need a correctly installed soundcard unless you have the -speakers connected directly to the grabber board. Hint: check the -mixer settings too. ALSA for example has everything muted by default. - - -How sound works in detail -~~~~~~~~~~~~~~~~~~~~~~~~~ - -Still doesn't work? Looks like some driver hacking is required. -Below is a do-it-yourself description for you. - -The bt8xx chips have 32 general purpose pins, and registers to control -these pins. One register is the output enable register -(BT848_GPIO_OUT_EN), it says which pins are actively driven by the -bt848 chip. Another one is the data register (BT848_GPIO_DATA), where -you can get/set the status if these pins. They can be used for input -and output. - -Most grabber board vendors use these pins to control an external chip -which does the sound routing. But every board is a little different. -These pins are also used by some companies to drive remote control -receiver chips. Some boards use the i2c bus instead of the gpio pins -to connect the mux chip. - -As mentioned above, there is a array which holds the required -information for each known board. You basically have to create a new -line for your board. The important fields are these two: - -.. code-block:: c - - struct tvcard - { - [ ... ] - u32 gpiomask; - u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */ - }; - -gpiomask specifies which pins are used to control the audio mux chip. -The corresponding bits in the output enable register -(BT848_GPIO_OUT_EN) will be set as these pins must be driven by the -bt848 chip. - -The audiomux\[\] array holds the data values for the different inputs -(i.e. which pins must be high/low for tuner/mute/...). This will be -written to the data register (BT848_GPIO_DATA) to switch the audio -mux. - - -What you have to do is figure out the correct values for gpiomask and -the audiomux array. If you have Windows and the drivers four your -card installed, you might to check out if you can read these registers -values used by the windows driver. A tool to do this is available -from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it -doesn't work with bt878 boards according to some reports I received. -Another one with bt878 support is available from -http://btwincap.sourceforge.net/Files/btspy2.00.zip - -You might also dig around in the \*.ini files of the Windows applications. -You can have a look at the board to see which of the gpio pins are -connected at all and then start trial-and-error ... - - -Starting with release 0.7.41 bttv has a number of insmod options to -make the gpio debugging easier: - -.. code-block:: none - - bttv_gpio=0/1 enable/disable gpio debug messages - gpiomask=n set the gpiomask value - audiomux=i,j,... set the values of the audiomux array - audioall=a set the values of the audiomux array (one - value for all array elements, useful to check - out which effect the particular value has). - -The messages printed with bttv_gpio=1 look like this: - -.. code-block:: none - - bttv0: gpio: en=00000027, out=00000024 in=00ffffd8 [audio: off] - - en = output _en_able register (BT848_GPIO_OUT_EN) - out = _out_put bits of the data register (BT848_GPIO_DATA), - i.e. BT848_GPIO_DATA & BT848_GPIO_OUT_EN - in = _in_put bits of the data register, - i.e. BT848_GPIO_DATA & ~BT848_GPIO_OUT_EN - - - -Other elements of the tvcards array -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -If you are trying to make a new card work you might find it useful to -know what the other elements in the tvcards array are good for: - -.. code-block:: none - - video_inputs - # of video inputs the card has - audio_inputs - historical cruft, not used any more. - tuner - which input is the tuner - svhs - which input is svhs (all others are labeled composite) - muxsel - video mux, input->registervalue mapping - pll - same as pll= insmod option - tuner_type - same as tuner= insmod option - *_modulename - hint whenever some card needs this or that audio - module loaded to work properly. - has_radio - whenever this TV card has a radio tuner. - no_msp34xx - "1" disables loading of msp3400.o module - no_tda9875 - "1" disables loading of tda9875.o module - needs_tvaudio - set to "1" to load tvaudio.o module - -If some config item is specified both from the tvcards array and as -insmod option, the insmod option takes precedence. - -Cards ------ - -.. note:: - - For a more updated list, please check - https://linuxtv.org/wiki/index.php/Hardware_Device_Information - -Supported cards: Bt848/Bt848a/Bt849/Bt878/Bt879 cards -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -All cards with Bt848/Bt848a/Bt849/Bt878/Bt879 and normal -Composite/S-VHS inputs are supported. Teletext and Intercast support -(PAL only) for ALL cards via VBI sample decoding in software. - -Some cards with additional multiplexing of inputs or other additional -fancy chips are only partially supported (unless specifications by the -card manufacturer are given). When a card is listed here it isn't -necessarily fully supported. - -All other cards only differ by additional components as tuners, sound -decoders, EEPROMs, teletext decoders ... - - -MATRIX Vision -~~~~~~~~~~~~~ - -MV-Delta -- Bt848A -- 4 Composite inputs, 1 S-VHS input (shared with 4th composite) -- EEPROM - -http://www.matrix-vision.de/ - -This card has no tuner but supports all 4 composite (1 shared with an -S-VHS input) of the Bt848A. -Very nice card if you only have satellite TV but several tuners connected -to the card via composite. - -Many thanks to Matrix-Vision for giving us 2 cards for free which made -Bt848a/Bt849 single crystal operation support possible!!! - - - -Miro/Pinnacle PCTV -~~~~~~~~~~~~~~~~~~ - -- Bt848 - some (all??) come with 2 crystals for PAL/SECAM and NTSC -- PAL, SECAM or NTSC TV tuner (Philips or TEMIC) -- MSP34xx sound decoder on add on board - decoder is supported but AFAIK does not yet work - (other sound MUX setting in GPIO port needed??? somebody who fixed this???) -- 1 tuner, 1 composite and 1 S-VHS input -- tuner type is autodetected - -http://www.miro.de/ -http://www.miro.com/ - - -Many thanks for the free card which made first NTSC support possible back -in 1997! - - -Hauppauge Win/TV pci -~~~~~~~~~~~~~~~~~~~~ - -There are many different versions of the Hauppauge cards with different -tuners (TV+Radio ...), teletext decoders. -Note that even cards with same model numbers have (depending on the revision) -different chips on it. - -- Bt848 (and others but always in 2 crystal operation???) - newer cards have a Bt878 - -- PAL, SECAM, NTSC or tuner with or without Radio support - -e.g.: - -- PAL: - - - TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners - - TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3 - -- NTSC: - - - TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners - - TSA5518: no datasheet available on Philips site - -- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip - with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM) - SAA5246 (I2C 0x22) is supported - -- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y - with configuration information - I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf) - -- 1 tuner, 1 composite and (depending on model) 1 S-VHS input - -- 14052B: mux for selection of sound source - -- sound decoder: TDA9800, MSP34xx (stereo cards) - - -Askey CPH-Series -~~~~~~~~~~~~~~~~ -Developed by TelSignal(?), OEMed by many vendors (Typhoon, Anubis, Dynalink) - -- Card series: - - CPH01x: BT848 capture only - - CPH03x: BT848 - - CPH05x: BT878 with FM - - CPH06x: BT878 (w/o FM) - - CPH07x: BT878 capture only - -- TV standards: - - CPH0x0: NTSC-M/M - - CPH0x1: PAL-B/G - - CPH0x2: PAL-I/I - - CPH0x3: PAL-D/K - - CPH0x4: SECAM-L/L - - CPH0x5: SECAM-B/G - - CPH0x6: SECAM-D/K - - CPH0x7: PAL-N/N - - CPH0x8: PAL-B/H - - CPH0x9: PAL-M/M - -- CPH03x was often sold as "TV capturer". - -Identifying: - - #) 878 cards can be identified by PCI Subsystem-ID: - - 144f:3000 = CPH06x - - 144F:3002 = CPH05x w/ FM - - 144F:3005 = CPH06x_LC (w/o remote control) - #) The cards have a sticker with "CPH"-model on the back. - #) These cards have a number printed on the PCB just above the tuner metal box: - - "80-CP2000300-x" = CPH03X - - "80-CP2000500-x" = CPH05X - - "80-CP2000600-x" = CPH06X / CPH06x_LC - - Askey sells these cards as "Magic TView series", Brand "MagicXpress". - Other OEM often call these "Tview", "TView99" or else. - -Lifeview Flyvideo Series: -~~~~~~~~~~~~~~~~~~~~~~~~~ - -The naming of these series differs in time and space. - -Identifying: - #) Some models can be identified by PCI subsystem ID: - - - 1852:1852 = Flyvideo 98 FM - - 1851:1850 = Flyvideo 98 - - 1851:1851 = Flyvideo 98 EZ (capture only) - - #) There is a print on the PCB: - - - LR25 = Flyvideo (Zoran ZR36120, SAA7110A) - - LR26 Rev.N = Flyvideo II (Bt848) - - LR26 Rev.O = Flyvideo II (Bt878) - - LR37 Rev.C = Flyvideo EZ (Capture only, ZR36120 + SAA7110) - - LR38 Rev.A1= Flyvideo II EZ (Bt848 capture only) - - LR50 Rev.Q = Flyvideo 98 (w/eeprom and PCI subsystem ID) - - LR50 Rev.W = Flyvideo 98 (no eeprom) - - LR51 Rev.E = Flyvideo 98 EZ (capture only) - - LR90 = Flyvideo 2000 (Bt878) - - LR90 Flyvideo 2000S (Bt878) w/Stereo TV (Package incl. LR91 daughterboard) - - LR91 = Stereo daughter card for LR90 - - LR97 = Flyvideo DVBS - - LR99 Rev.E = Low profile card for OEM integration (only internal audio!) bt878 - - LR136 = Flyvideo 2100/3100 (Low profile, SAA7130/SAA7134) - - LR137 = Flyvideo DV2000/DV3000 (SAA7130/SAA7134 + IEEE1394) - - LR138 Rev.C= Flyvideo 2000 (SAA7130) - - LR138 Flyvideo 3000 (SAA7134) w/Stereo TV - - - These exist in variations w/FM and w/Remote sometimes denoted - by suffixes "FM" and "R". - - #) You have a laptop (miniPCI card): - - - Product = FlyTV Platinum Mini - - Model/Chip = LR212/saa7135 - - - Lifeview.com.tw states (Feb. 2002): - "The FlyVideo2000 and FlyVideo2000s product name have renamed to FlyVideo98." - Their Bt8x8 cards are listed as discontinued. - - Flyvideo 2000S was probably sold as Flyvideo 3000 in some countries(Europe?). - The new Flyvideo 2000/3000 are SAA7130/SAA7134 based. - -"Flyvideo II" had been the name for the 848 cards, nowadays (in Germany) -this name is re-used for LR50 Rev.W. - -The Lifeview website mentioned Flyvideo III at some time, but such a card -has not yet been seen (perhaps it was the german name for LR90 [stereo]). -These cards are sold by many OEMs too. - -FlyVideo A2 (Elta 8680)= LR90 Rev.F (w/Remote, w/o FM, stereo TV by tda9821) {Germany} - -Lifeview 3000 (Elta 8681) as sold by Plus(April 2002), Germany = LR138 w/ saa7134 - -lifeview config coding on gpio pins 0-9 -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -- LR50 rev. Q ("PARTS: 7031505116), Tuner wurde als Nr. 5 erkannt, Eingänge - SVideo, TV, Composite, Audio, Remote: - - - CP9..1=100001001 (1: 0-Ohm-Widerstand gegen GND unbestückt; 0: bestückt) - - -Typhoon TV card series: -~~~~~~~~~~~~~~~~~~~~~~~ - -These can be CPH, Flyvideo, Pixelview or KNC1 series. -Typhoon is the brand of Anubis. -Model 50680 got re-used, some model no. had different contents over time. - -Models: - - - 50680 "TV Tuner PCI Pal BG"(old,red package)=can be CPH03x(bt848) or CPH06x(bt878) - - 50680 "TV Tuner Pal BG" (blue package)= Pixelview PV-BT878P+ (Rev 9B) - - 50681 "TV Tuner PCI Pal I" (variant of 50680) - - 50682 "TView TV/FM Tuner Pal BG" = Flyvideo 98FM (LR50 Rev.Q) - - .. note:: - - The package has a picture of CPH05x (which would be a real TView) - - - 50683 "TV Tuner PCI SECAM" (variant of 50680) - - 50684 "TV Tuner Pal BG" = Pixelview 878TV(Rev.3D) - - 50686 "TV Tuner" = KNC1 TV Station - - 50687 "TV Tuner stereo" = KNC1 TV Station pro - - 50688 "TV Tuner RDS" (black package) = KNC1 TV Station RDS - - 50689 TV SAT DVB-S CARD CI PCI (SAA7146AH, SU1278?) = "KNC1 TV Station DVB-S" - - 50692 "TV/FM Tuner" (small PCB) - - 50694 TV TUNER CARD RDS (PHILIPS CHIPSET SAA7134HL) - - 50696 TV TUNER STEREO (PHILIPS CHIPSET SAA7134HL, MK3ME Tuner) - - 50804 PC-SAT TV/Audio Karte = Techni-PC-Sat (ZORAN 36120PQC, Tuner:Alps) - - 50866 TVIEW SAT RECEIVER+ADR - - 50868 "TV/FM Tuner Pal I" (variant of 50682) - - 50999 "TV/FM Tuner Secam" (variant of 50682) - -Guillemot -~~~~~~~~~ - -Models: - -- Maxi-TV PCI (ZR36120) -- Maxi TV Video 2 = LR50 Rev.Q (FI1216MF, PAL BG+SECAM) -- Maxi TV Video 3 = CPH064 (PAL BG + SECAM) - -Mentor -~~~~~~ - -Mentor TV card ("55-878TV-U1") = Pixelview 878TV(Rev.3F) (w/FM w/Remote) - -Prolink -~~~~~~~ - -- TV cards: - - - PixelView Play TV pro - (Model: PV-BT878P+ REV 8E) - - PixelView Play TV pro - (Model: PV-BT878P+ REV 9D) - - PixelView Play TV pro - (Model: PV-BT878P+ REV 4C / 8D / 10A ) - - PixelView Play TV - (Model: PV-BT848P+) - - 878TV - (Model: PV-BT878TV) - -- Multimedia TV packages (card + software pack): - - - PixelView Play TV Theater - (Model: PV-M4200) = PixelView Play TV pro + Software - - PixelView Play TV PAK - (Model: PV-BT878P+ REV 4E) - - PixelView Play TV/VCR - (Model: PV-M3200 REV 4C / 8D / 10A ) - - PixelView Studio PAK - (Model: M2200 REV 4C / 8D / 10A ) - - PixelView PowerStudio PAK - (Model: PV-M3600 REV 4E) - - PixelView DigitalVCR PAK - (Model: PV-M2400 REV 4C / 8D / 10A ) - - PixelView PlayTV PAK II (TV/FM card + usb camera) PV-M3800 - - PixelView PlayTV XP PV-M4700,PV-M4700(w/FM) - - PixelView PlayTV DVR PV-M4600 package contents:PixelView PlayTV pro, windvr & videoMail s/w - -- Further Cards: - - - PV-BT878P+rev.9B (Play TV Pro, opt. w/FM w/NICAM) - - PV-BT878P+rev.2F - - PV-BT878P Rev.1D (bt878, capture only) - - - XCapture PV-CX881P (cx23881) - - PlayTV HD PV-CX881PL+, PV-CX881PL+(w/FM) (cx23881) - - - DTV3000 PV-DTV3000P+ DVB-S CI = Twinhan VP-1030 - - DTV2000 DVB-S = Twinhan VP-1020 - -- Video Conferencing: - - - PixelView Meeting PAK - (Model: PV-BT878P) - - PixelView Meeting PAK Lite - (Model: PV-BT878P) - - PixelView Meeting PAK plus - (Model: PV-BT878P+rev 4C/8D/10A) - - PixelView Capture - (Model: PV-BT848P) - - PixelView PlayTV USB pro - - Model No. PV-NT1004+, PV-NT1004+ (w/FM) = NT1004 USB decoder chip + SAA7113 video decoder chip - -Dynalink -~~~~~~~~ - -These are CPH series. - -Phoebemicro -~~~~~~~~~~~ - -- TV Master = CPH030 or CPH060 -- TV Master FM = CPH050 - -Genius/Kye -~~~~~~~~~~ - -- Video Wonder/Genius Internet Video Kit = LR37 Rev.C -- Video Wonder Pro II (848 or 878) = LR26 - -Tekram -~~~~~~ - -- VideoCap C205 (Bt848) -- VideoCap C210 (zr36120 +Philips) -- CaptureTV M200 (ISA) -- CaptureTV M205 (Bt848) - -Lucky Star -~~~~~~~~~~ - -- Image World Conference TV = LR50 Rev. Q - -Leadtek -~~~~~~~ - -- WinView 601 (Bt848) -- WinView 610 (Zoran) -- WinFast2000 -- WinFast2000 XP - -Support for the Leadtek WinView 601 TV/FM -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Author of this section: Jon Tombs <jon@gte.esi.us.es> - -This card is basically the same as all the rest (Bt484A, Philips tuner), -the main difference is that they have attached a programmable attenuator to 3 -GPIO lines in order to give some volume control. They have also stuck an -infra-red remote control decoded on the board, I will add support for this -when I get time (it simple generates an interrupt for each key press, with -the key code is placed in the GPIO port). - -I don't yet have any application to test the radio support. The tuner -frequency setting should work but it is possible that the audio multiplexer -is wrong. If it doesn't work, send me email. - - -- No Thanks to Leadtek they refused to answer any questions about their - hardware. The driver was written by visual inspection of the card. If you - use this driver, send an email insult to them, and tell them you won't - continue buying their hardware unless they support Linux. - -- Little thanks to Princeton Technology Corp (http://www.princeton.com.tw) - who make the audio attenuator. Their publicly available data-sheet available - on their web site doesn't include the chip programming information! Hidden - on their server are the full data-sheets, but don't ask how I found it. - -To use the driver I use the following options, the tuner and pll settings might -be different in your country - -insmod videodev -insmod i2c scan=1 i2c_debug=0 verbose=0 -insmod tuner type=1 debug=0 -insmod bttv pll=1 radio=1 card=17 - - -KNC One -~~~~~~~ - -- TV-Station -- TV-Station SE (+Software Bundle) -- TV-Station pro (+TV stereo) -- TV-Station FM (+Radio) -- TV-Station RDS (+RDS) -- TV Station SAT (analog satellite) -- TV-Station DVB-S - -.. note:: newer Cards have saa7134, but model name stayed the same? - -Provideo -~~~~~~~~ - -- PV951 or PV-951 (also are sold as: - Boeder TV-FM Video Capture Card, - Titanmedia Supervision TV-2400, - Provideo PV951 TF, - 3DeMon PV951, - MediaForte TV-Vision PV951, - Yoko PV951, - Vivanco Tuner Card PCI Art.-Nr.: 68404, - ) now named PV-951T - -- Surveillance Series: - - - PV-141 - - PV-143 - - PV-147 - - PV-148 (capture only) - - PV-150 - - PV-151 - -- TV-FM Tuner Series: - - - PV-951TDV (tv tuner + 1394) - - PV-951T/TF - - PV-951PT/TF - - PV-956T/TF Low Profile - - PV-911 - -Highscreen -~~~~~~~~~~ - -Models: - -- TV Karte = LR50 Rev.S -- TV-Boostar = Terratec Terra TV+ Version 1.0 (Bt848, tda9821) "ceb105.pcb" - -Zoltrix -~~~~~~~ - -Models: - -- Face to Face Capture (Bt848 capture only) (PCB "VP-2848") -- Face To Face TV MAX (Bt848) (PCB "VP-8482 Rev1.3") -- Genie TV (Bt878) (PCB "VP-8790 Rev 2.1") -- Genie Wonder Pro - -AVerMedia -~~~~~~~~~ - -- AVer FunTV Lite (ISA, AV3001 chipset) "M101.C" -- AVerTV -- AVerTV Stereo -- AVerTV Studio (w/FM) -- AVerMedia TV98 with Remote -- AVerMedia TV/FM98 Stereo -- AVerMedia TVCAM98 -- TVCapture (Bt848) -- TVPhone (Bt848) -- TVCapture98 (="AVerMedia TV98" in USA) (Bt878) -- TVPhone98 (Bt878, w/FM) - -======== =========== =============== ======= ====== ======== ======================= -PCB PCI-ID Model-Name Eeprom Tuner Sound Country -======== =========== =============== ======= ====== ======== ======================= -M101.C ISA ! -M108-B Bt848 -- FR1236 US [#f2]_, [#f3]_ -M1A8-A Bt848 AVer TV-Phone FM1216 -- -M168-T 1461:0003 AVerTV Studio 48:17 FM1216 TDA9840T D [#f1]_ w/FM w/Remote -M168-U 1461:0004 TVCapture98 40:11 FI1216 -- D w/Remote -M168II-B 1461:0003 Medion MD9592 48:16 FM1216 TDA9873H D w/FM -======== =========== =============== ======= ====== ======== ======================= - -.. [#f1] Daughterboard MB68-A with TDA9820T and TDA9840T -.. [#f2] Sony NE41S soldered (stereo sound?) -.. [#f3] Daughterboard M118-A w/ pic 16c54 and 4 MHz quartz - -- US site has different drivers for (as of 09/2002): - - - EZ Capture/InterCam PCI (BT-848 chip) - - EZ Capture/InterCam PCI (BT-878 chip) - - TV-Phone (BT-848 chip) - - TV98 (BT-848 chip) - - TV98 With Remote (BT-848 chip) - - TV98 (BT-878 chip) - - TV98 With Remote (BT-878) - - TV/FM98 (BT-878 chip) - - AVerTV - - AverTV Stereo - - AVerTV Studio - -DE hat diverse Treiber fuer diese Modelle (Stand 09/2002): - - - TVPhone (848) mit Philips tuner FR12X6 (w/ FM radio) - - TVPhone (848) mit Philips tuner FM12X6 (w/ FM radio) - - TVCapture (848) w/Philips tuner FI12X6 - - TVCapture (848) non-Philips tuner - - TVCapture98 (Bt878) - - TVPhone98 (Bt878) - - AVerTV und TVCapture98 w/VCR (Bt 878) - - AVerTVStudio und TVPhone98 w/VCR (Bt878) - - AVerTV GO Serie (Kein SVideo Input) - - AVerTV98 (BT-878 chip) - - AVerTV98 mit Fernbedienung (BT-878 chip) - - AVerTV/FM98 (BT-878 chip) - - - VDOmate (www.averm.com.cn) = M168U ? - -Aimslab -~~~~~~~ - -Models: - -- Video Highway or "Video Highway TR200" (ISA) -- Video Highway Xtreme (aka "VHX") (Bt848, FM w/ TEA5757) - -IXMicro (former: IMS=Integrated Micro Solutions) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- IXTV BT848 (=TurboTV) -- IXTV BT878 -- IMS TurboTV (Bt848) - -Lifetec/Medion/Tevion/Aldi -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- LT9306/MD9306 = CPH061 -- LT9415/MD9415 = LR90 Rev.F or Rev.G -- MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H) -- MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner) -- MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner) - -Modular Technologies (www.modulartech.com) UK -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- MM100 PCTV (Bt848) -- MM201 PCTV (Bt878, Bt832) w/ Quartzsight camera -- MM202 PCTV (Bt878, Bt832, tda9874) -- MM205 PCTV (Bt878) -- MM210 PCTV (Bt878) (Galaxy TV, Galaxymedia ?) - -Terratec -~~~~~~~~ - -Models: - -- Terra TV+ Version 1.0 (Bt848), "ceb105.PCB" printed on the PCB, TDA9821 -- Terra TV+ Version 1.1 (Bt878), "LR74 Rev.E" printed on the PCB, TDA9821 -- Terra TValueRadio, "LR102 Rev.C" printed on the PCB -- Terra TV/Radio+ Version 1.0, "80-CP2830100-0" TTTV3 printed on the PCB, - "CPH010-E83" on the back, SAA6588T, TDA9873H -- Terra TValue Version BT878, "80-CP2830110-0 TTTV4" printed on the PCB, - "CPH011-D83" on back -- Terra TValue Version 1.0 "ceb105.PCB" (really identical to Terra TV+ Version 1.0) -- Terra TValue New Revision "LR102 Rec.C" -- Terra Active Radio Upgrade (tea5757h, saa6588t) - -- LR74 is a newer PCB revision of ceb105 (both incl. connector for Active Radio Upgrade) - -- Cinergy 400 (saa7134), "E877 11(S)", "PM820092D" printed on PCB -- Cinergy 600 (saa7134) - -Technisat -~~~~~~~~~ - -Models: - -- Discos ADR PC-Karte ISA (no TV!) -- Discos ADR PC-Karte PCI (probably no TV?) -- Techni-PC-Sat (Sat. analog) - Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A) -- Mediafocus I (zr36120/zr36125, drp3510, Sat. analog + ADR Radio) -- Mediafocus II (saa7146, Sat. analog) -- SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A) -- SkyStar 1 DVB (AV7110) = Technotrend Premium -- SkyStar 2 DVB (B2C2) (=Sky2PC) - -Siemens -~~~~~~~ - -Multimedia eXtension Board (MXB) (SAA7146, SAA7111) - -Powercolor -~~~~~~~~~~ - -Models: - -- MTV878 - Package comes with different contents: - - a) pcb "MTV878" (CARD=75) - b) Pixelview Rev. 4\_ - -- MTV878R w/Remote Control -- MTV878F w/Remote Control w/FM radio - -Pinnacle -~~~~~~~~ - -PCTV models: - -- Mirovideo PCTV (Bt848) -- Mirovideo PCTV SE (Bt848) -- Mirovideo PCTV Pro (Bt848 + Daughterboard for TV Stereo and FM) -- Studio PCTV Rave (Bt848 Version = Mirovideo PCTV) -- Studio PCTV Rave (Bt878 package w/o infrared) -- Studio PCTV (Bt878) -- Studio PCTV Pro (Bt878 stereo w/ FM) -- Pinnacle PCTV (Bt878, MT2032) -- Pinnacle PCTV Pro (Bt878, MT2032) -- Pinncale PCTV Sat (bt878a, HM1821/1221) ["Conexant CX24110 with CX24108 tuner, aka HM1221/HM1811"] -- Pinnacle PCTV Sat XE - -M(J)PEG capture and playback models: - -- DC1+ (ISA) -- DC10 (zr36057, zr36060, saa7110, adv7176) -- DC10+ (zr36067, zr36060, saa7110, adv7176) -- DC20 (ql16x24b,zr36050, zr36016, saa7110, saa7187 ...) -- DC30 (zr36057, zr36050, zr36016, vpx3220, adv7176, ad1843, tea6415, miro FST97A1) -- DC30+ (zr36067, zr36050, zr36016, vpx3220, adv7176) -- DC50 (zr36067, zr36050, zr36016, saa7112, adv7176 (2 pcs.?), ad1843, miro FST97A1, Lattice ???) - -Lenco -~~~~~ - -Models: - -- MXR-9565 (=Technisat Mediafocus?) -- MXR-9571 (Bt848) (=CPH031?) -- MXR-9575 -- MXR-9577 (Bt878) (=Prolink 878TV Rev.3x) -- MXTV-9578CP (Bt878) (= Prolink PV-BT878P+4E) - -Iomega -~~~~~~ - -Buz (zr36067, zr36060, saa7111, saa7185) - -LML -~~~ - LML33 (zr36067, zr36060, bt819, bt856) - -Grandtec -~~~~~~~~ - -Models: - -- Grand Video Capture (Bt848) -- Multi Capture Card (Bt878) - -Koutech -~~~~~~~ - -Models: - -- KW-606 (Bt848) -- KW-607 (Bt848 capture only) -- KW-606RSF -- KW-607A (capture only) -- KW-608 (Zoran capture only) - -IODATA (jp) -~~~~~~~~~~~ - -Models: - -- GV-BCTV/PCI -- GV-BCTV2/PCI -- GV-BCTV3/PCI -- GV-BCTV4/PCI -- GV-VCP/PCI (capture only) -- GV-VCP2/PCI (capture only) - -Canopus (jp) -~~~~~~~~~~~~ - -WinDVR = Kworld "KW-TVL878RF" - -www.sigmacom.co.kr -~~~~~~~~~~~~~~~~~~ - -Sigma Cyber TV II - -www.sasem.co.kr -~~~~~~~~~~~~~~~ - -Litte OnAir TV - -hama -~~~~ - -TV/Radio-Tuner Card, PCI (Model 44677) = CPH051 - -Sigma Designs -~~~~~~~~~~~~~ - -Hollywood plus (em8300, em9010, adv7175), (PCB "M340-10") MPEG DVD decoder - -Formac -~~~~~~ - -Models: - -- iProTV (Card for iMac Mezzanine slot, Bt848+SCSI) -- ProTV (Bt848) -- ProTV II = ProTV Stereo (Bt878) ["stereo" means FM stereo, tv is still mono] - -ATI -~~~ - -Models: - -- TV-Wonder -- TV-Wonder VE - -Diamond Multimedia -~~~~~~~~~~~~~~~~~~ - -DTV2000 (Bt848, tda9875) - -Aopen -~~~~~ - -- VA1000 Plus (w/ Stereo) -- VA1000 Lite -- VA1000 (=LR90) - -Intel -~~~~~ - -Models: - -- Smart Video Recorder (ISA full-length) -- Smart Video Recorder pro (ISA half-length) -- Smart Video Recorder III (Bt848) - -STB -~~~ - -Models: - -- STB Gateway 6000704 (bt878) -- STB Gateway 6000699 (bt848) -- STB Gateway 6000402 (bt848) -- STB TV130 PCI - -Videologic -~~~~~~~~~~ - -Models: - -- Captivator Pro/TV (ISA?) -- Captivator PCI/VC (Bt848 bundled with camera) (capture only) - -Technotrend -~~~~~~~~~~~~ - -Models: - -- TT-SAT PCI (PCB "Sat-PCI Rev.:1.3.1"; zr36125, vpx3225d, stc0056a, Tuner:BSKE6-155A -- TT-DVB-Sat - - revisions 1.1, 1.3, 1.5, 1.6 and 2.1 - - This card is sold as OEM from: - - - Siemens DVB-s Card - - Hauppauge WinTV DVB-S - - Technisat SkyStar 1 DVB - - Galaxis DVB Sat - - - Now this card is called TT-PCline Premium Family - - TT-Budget (saa7146, bsru6-701a) - This card is sold as OEM from: - - - Hauppauge WinTV Nova - - Satelco Standard PCI (DVB-S) - - TT-DVB-C PCI - -Teles -~~~~~ - - DVB-s (Rev. 2.2, BSRV2-301A, data only?) - -Remote Vision -~~~~~~~~~~~~~ - -MX RV605 (Bt848 capture only) - -Boeder -~~~~~~ - -Models: - -- PC ChatCam (Model 68252) (Bt848 capture only) -- Tv/Fm Capture Card (Model 68404) = PV951 - -Media-Surfer (esc-kathrein.de) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- Sat-Surfer (ISA) -- Sat-Surfer PCI = Techni-PC-Sat -- Cable-Surfer 1 -- Cable-Surfer 2 -- Cable-Surfer PCI (zr36120) -- Audio-Surfer (ISA Radio card) - -Jetway (www.jetway.com.tw) -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- JW-TV 878M -- JW-TV 878 = KWorld KW-TV878RF - -Galaxis -~~~~~~~ - -Models: - -- Galaxis DVB Card S CI -- Galaxis DVB Card C CI -- Galaxis DVB Card S -- Galaxis DVB Card C -- Galaxis plug.in S [neuer Name: Galaxis DVB Card S CI - -Hauppauge -~~~~~~~~~ - -Models: - -- many many WinTV models ... -- WinTV DVBs = Technotrend Premium 1.3 -- WinTV NOVA = Technotrend Budget 1.1 "S-DVB DATA" -- WinTV NOVA-CI "SDVBACI" -- WinTV Nova USB (=Technotrend USB 1.0) -- WinTV-Nexus-s (=Technotrend Premium 2.1 or 2.2) -- WinTV PVR -- WinTV PVR 250 -- WinTV PVR 450 - -US models - --990 WinTV-PVR-350 (249USD) (iTVC15 chipset + radio) --980 WinTV-PVR-250 (149USD) (iTVC15 chipset) --880 WinTV-PVR-PCI (199USD) (KFIR chipset + bt878) --881 WinTV-PVR-USB --190 WinTV-GO --191 WinTV-GO-FM --404 WinTV --401 WinTV-radio --495 WinTV-Theater --602 WinTV-USB --621 WinTV-USB-FM --600 USB-Live --698 WinTV-HD --697 WinTV-D --564 WinTV-Nexus-S - -Deutsche Modelle: - --603 WinTV GO --719 WinTV Primio-FM --718 WinTV PCI-FM --497 WinTV Theater --569 WinTV USB --568 WinTV USB-FM --882 WinTV PVR --981 WinTV PVR 250 --891 WinTV-PVR-USB --541 WinTV Nova --488 WinTV Nova-Ci --564 WinTV-Nexus-s --727 WinTV-DVB-c --545 Common Interface --898 WinTV-Nova-USB - -UK models: - --607 WinTV Go --693,793 WinTV Primio FM --647,747 WinTV PCI FM --498 WinTV Theater --883 WinTV PVR --893 WinTV PVR USB (Duplicate entry) --566 WinTV USB (UK) --573 WinTV USB FM --429 Impact VCB (bt848) --600 USB Live (Video-In 1x Comp, 1xSVHS) --542 WinTV Nova --717 WinTV DVB-S --909 Nova-t PCI --893 Nova-t USB (Duplicate entry) --802 MyTV --804 MyView --809 MyVideo --872 MyTV2Go FM --546 WinTV Nova-S CI --543 WinTV Nova --907 Nova-S USB --908 Nova-T USB --717 WinTV Nexus-S --157 DEC3000-s Standalone + USB - -Spain: - --685 WinTV-Go --690 WinTV-PrimioFM --416 WinTV-PCI Nicam Estereo --677 WinTV-PCI-FM --699 WinTV-Theater --683 WinTV-USB --678 WinTV-USB-FM --983 WinTV-PVR-250 --883 WinTV-PVR-PCI --993 WinTV-PVR-350 --893 WinTV-PVR-USB --728 WinTV-DVB-C PCI --832 MyTV2Go --869 MyTV2Go-FM --805 MyVideo (USB) - - -Matrix-Vision -~~~~~~~~~~~~~ - -Models: - -- MATRIX-Vision MV-Delta -- MATRIX-Vision MV-Delta 2 -- MVsigma-SLC (Bt848) - -Conceptronic (.net) -~~~~~~~~~~~~~~~~~~~ - -Models: - -- TVCON FM, TV card w/ FM = CPH05x -- TVCON = CPH06x - -BestData -~~~~~~~~ - -Models: - -- HCC100 = VCC100rev1 + camera -- VCC100 rev1 (bt848) -- VCC100 rev2 (bt878) - -Gallant (www.gallantcom.com) www.minton.com.tw -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- Intervision IV-510 (capture only bt8x8) -- Intervision IV-550 (bt8x8) -- Intervision IV-100 (zoran) -- Intervision IV-1000 (bt8x8) - -Asonic (www.asonic.com.cn) (website down) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -SkyEye tv 878 - -Hoontech -~~~~~~~~ - -878TV/FM - -Teppro (www.itcteppro.com.tw) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- ITC PCITV (Card Ver 1.0) "Teppro TV1/TVFM1 Card" -- ITC PCITV (Card Ver 2.0) -- ITC PCITV (Card Ver 3.0) = "PV-BT878P+ (REV.9D)" -- ITC PCITV (Card Ver 4.0) -- TEPPRO IV-550 (For BT848 Main Chip) -- ITC DSTTV (bt878, satellite) -- ITC VideoMaker (saa7146, StreamMachine sm2110, tvtuner) "PV-SM2210P+ (REV:1C)" - -Kworld (www.kworld.com.tw) -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -PC TV Station: - -- KWORLD KW-TV878R TV (no radio) -- KWORLD KW-TV878RF TV (w/ radio) -- KWORLD KW-TVL878RF (low profile) -- KWORLD KW-TV713XRF (saa7134) - - - MPEG TV Station (same cards as above plus WinDVR Software MPEG en/decoder) - -- KWORLD KW-TV878R -Pro TV (no Radio) -- KWORLD KW-TV878RF-Pro TV (w/ Radio) -- KWORLD KW-TV878R -Ultra TV (no Radio) -- KWORLD KW-TV878RF-Ultra TV (w/ Radio) - -JTT/ Justy Corp.(http://www.jtt.ne.jp/) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -JTT-02 (JTT TV) "TV watchmate pro" (bt848) - -ADS www.adstech.com -~~~~~~~~~~~~~~~~~~~ - -Models: - -- Channel Surfer TV ( CHX-950 ) -- Channel Surfer TV+FM ( CHX-960FM ) - -AVEC www.prochips.com -~~~~~~~~~~~~~~~~~~~~~ - -AVEC Intercapture (bt848, tea6320) - -NoBrand -~~~~~~~ - -TV Excel = Australian Name for "PV-BT878P+ 8E" or "878TV Rev.3\_" - -Mach www.machspeed.com -~~~~~~~~~~~~~~~~~~~~~~ - -Mach TV 878 - -Eline www.eline-net.com/ -~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- Eline Vision TVMaster / TVMaster FM (ELV-TVM/ ELV-TVM-FM) = LR26 (bt878) -- Eline Vision TVMaster-2000 (ELV-TVM-2000, ELV-TVM-2000-FM)= LR138 (saa713x) - -Spirit -~~~~~~ - -- Spirit TV Tuner/Video Capture Card (bt848) - -Boser www.boser.com.tw -~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- HS-878 Mini PCI Capture Add-on Card -- HS-879 Mini PCI 3D Audio and Capture Add-on Card (w/ ES1938 Solo-1) - -Satelco www.citycom-gmbh.de, www.satelco.de -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- TV-FM =KNC1 saa7134 -- Standard PCI (DVB-S) = Technotrend Budget -- Standard PCI (DVB-S) w/ CI -- Satelco Highend PCI (DVB-S) = Technotrend Premium - - -Sensoray www.sensoray.com -~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- Sensoray 311 (PC/104 bus) -- Sensoray 611 (PCI) - -CEI (Chartered Electronics Industries Pte Ltd [CEI] [FCC ID HBY]) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- TV Tuner - HBY-33A-RAFFLES Brooktree Bt848KPF + Philips -- TV Tuner MG9910 - HBY33A-TVO CEI + Philips SAA7110 + OKI M548262 + ST STV8438CV -- Primetime TV (ISA) - - - acquired by Singapore Technologies - - now operating as Chartered Semiconductor Manufacturing - - Manufacturer of video cards is listed as: - - - Cogent Electronics Industries [CEI] - -AITech -~~~~~~ - -Models: - -- Wavewatcher TV (ISA) -- AITech WaveWatcher TV-PCI = can be LR26 (Bt848) or LR50 (BT878) -- WaveWatcher TVR-202 TV/FM Radio Card (ISA) - -MAXRON -~~~~~~ - -Maxron MaxTV/FM Radio (KW-TV878-FNT) = Kworld or JW-TV878-FBK - -www.ids-imaging.de -~~~~~~~~~~~~~~~~~~ - -Models: - -- Falcon Series (capture only) - -In USA: http://www.theimagingsource.com/ -- DFG/LC1 - -www.sknet-web.co.jp -~~~~~~~~~~~~~~~~~~~ - -SKnet Monster TV (saa7134) - -A-Max www.amaxhk.com (Colormax, Amax, Napa) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -APAC Viewcomp 878 - -Cybertainment -~~~~~~~~~~~~~ - -Models: - -- CyberMail AV Video Email Kit w/ PCI Capture Card (capture only) -- CyberMail Xtreme - -These are Flyvideo - -VCR (http://www.vcrinc.com/) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Video Catcher 16 - -Twinhan -~~~~~~~ - -Models: - -- DST Card/DST-IP (bt878, twinhan asic) VP-1020 - - Sold as: - - - KWorld DVBS Satellite TV-Card - - Powercolor DSTV Satellite Tuner Card - - Prolink Pixelview DTV2000 - - Provideo PV-911 Digital Satellite TV Tuner Card With Common Interface ? - -- DST-CI Card (DVB Satellite) VP-1030 -- DCT Card (DVB cable) - -MSI -~~~ - -Models: - -- MSI TV@nywhere Tuner Card (MS-8876) (CX23881/883) Not Bt878 compatible. -- MS-8401 DVB-S - -Focus www.focusinfo.com -~~~~~~~~~~~~~~~~~~~~~~~ - -InVideo PCI (bt878) - -Sdisilk www.sdisilk.com/ -~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- SDI Silk 100 -- SDI Silk 200 SDI Input Card - -www.euresys.com -~~~~~~~~~~~~~~~ - -PICOLO series - -PMC/Pace -~~~~~~~~ - -www.pacecom.co.uk website closed - -Mercury www.kobian.com (UK and FR) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Models: - -- LR50 -- LR138RBG-Rx == LR138 - -TEC sound -~~~~~~~~~ - -TV-Mate = Zoltrix VP-8482 - -Though educated googling found: www.techmakers.com - -(package and manuals don't have any other manufacturer info) TecSound - -Lorenzen www.lorenzen.de -~~~~~~~~~~~~~~~~~~~~~~~~ - -SL DVB-S PCI = Technotrend Budget PCI (su1278 or bsru version) - -Origo (.uk) www.origo2000.com -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -PC TV Card = LR50 - -I/O Magic www.iomagic.com -~~~~~~~~~~~~~~~~~~~~~~~~~ - -PC PVR - Desktop TV Personal Video Recorder DR-PCTV100 = Pinnacle ROB2D-51009464 4.0 + Cyberlink PowerVCR II - -Arowana -~~~~~~~ - -TV-Karte / Poso Power TV (?) = Zoltrix VP-8482 (?) - -iTVC15 boards -~~~~~~~~~~~~~ - -kuroutoshikou.com ITVC15 -yuan.com MPG160 PCI TV (Internal PCI MPEG2 encoder card plus TV-tuner) - -Asus www.asuscom.com -~~~~~~~~~~~~~~~~~~~~ - -Models: - -- Asus TV Tuner Card 880 NTSC (low profile, cx23880) -- Asus TV (saa7134) - -Hoontech -~~~~~~~~ - -http://www.hoontech.de/ - -- HART Vision 848 (H-ART Vision 848) -- HART Vision 878 (H-Art Vision 878) - - - -Chips used at bttv devices --------------------------- - -- all boards: - - - Brooktree Bt848/848A/849/878/879: video capture chip - -- Board specific - - - Miro PCTV: - - - Philips or Temic Tuner - - - Hauppauge Win/TV pci (version 405): - - - Microchip 24LC02B or Philips 8582E2Y: - - - 256 Byte EEPROM with configuration information - - I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf) - - - Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23 - - - TDA9800: sound decoder - - - Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem) - - - 14052B: analog switch for selection of sound source - -- PAL: - - - TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners - - TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3 - -- NTSC: - - - TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners - - TSA5518: no datasheet available on Philips site - -- STB TV pci: - - - ??? - - if you want better support for STB cards send me info! - Look at the board! What chips are on it? - - - - -Specs ------ - -Philips http://www.Semiconductors.COM/pip/ - -Conexant http://www.conexant.com/ - -Micronas http://www.micronas.com/en/home/index.html - -Thanks ------- - -Many thanks to: - -- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848 - and tuner programming and his control program xtvc. - -- Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext - package. - -- Gerd Hoffmann for the MSP3400 support and the modular - I2C, tuner, ... support. - - -- MATRIX Vision for giving us 2 cards for free, which made support of - single crystal operation possible. - -- MIRO for providing a free PCTV card and detailed information about the - components on their cards. (E.g. how the tuner type is detected) - Without their card I could not have debugged the NTSC mode. - -- Hauppauge for telling how the sound input is selected and what components - they do and will use on their radio cards. - Also many thanks for faxing me the FM1216 data sheet. - -Contributors ------------- - -Michael Chu <mmchu@pobox.com> - AverMedia fix and more flexible card recognition - -Alan Cox <alan@lxorguk.ukuu.org.uk> - Video4Linux interface and 2.1.x kernel adaptation - -Chris Kleitsch - Hardware I2C - -Gerd Hoffmann - Radio card (ITT sound processor) - -bigfoot <bigfoot@net-way.net> - -Ragnar Hojland Espinosa <ragnar@macula.net> - ConferenceTV card - - -+ many more (please mail me if you are missing in this list and would - like to be mentioned) |