aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/Documentation/networking/skfp.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/skfp.txt')
-rw-r--r--Documentation/networking/skfp.txt220
1 files changed, 0 insertions, 220 deletions
diff --git a/Documentation/networking/skfp.txt b/Documentation/networking/skfp.txt
deleted file mode 100644
index 203ec66c9fb4..000000000000
--- a/Documentation/networking/skfp.txt
+++ /dev/null
@@ -1,220 +0,0 @@
-(C)Copyright 1998-2000 SysKonnect,
-===========================================================================
-
-skfp.txt created 11-May-2000
-
-Readme File for skfp.o v2.06
-
-
-This file contains
-(1) OVERVIEW
-(2) SUPPORTED ADAPTERS
-(3) GENERAL INFORMATION
-(4) INSTALLATION
-(5) INCLUSION OF THE ADAPTER IN SYSTEM START
-(6) TROUBLESHOOTING
-(7) FUNCTION OF THE ADAPTER LEDS
-(8) HISTORY
-
-===========================================================================
-
-
-
-(1) OVERVIEW
-============
-
-This README explains how to use the driver 'skfp' for Linux with your
-network adapter.
-
-Chapter 2: Contains a list of all network adapters that are supported by
- this driver.
-
-Chapter 3: Gives some general information.
-
-Chapter 4: Describes common problems and solutions.
-
-Chapter 5: Shows the changed functionality of the adapter LEDs.
-
-Chapter 6: History of development.
-
-***
-
-
-(2) SUPPORTED ADAPTERS
-======================
-
-The network driver 'skfp' supports the following network adapters:
-SysKonnect adapters:
- - SK-5521 (SK-NET FDDI-UP)
- - SK-5522 (SK-NET FDDI-UP DAS)
- - SK-5541 (SK-NET FDDI-FP)
- - SK-5543 (SK-NET FDDI-LP)
- - SK-5544 (SK-NET FDDI-LP DAS)
- - SK-5821 (SK-NET FDDI-UP64)
- - SK-5822 (SK-NET FDDI-UP64 DAS)
- - SK-5841 (SK-NET FDDI-FP64)
- - SK-5843 (SK-NET FDDI-LP64)
- - SK-5844 (SK-NET FDDI-LP64 DAS)
-Compaq adapters (not tested):
- - Netelligent 100 FDDI DAS Fibre SC
- - Netelligent 100 FDDI SAS Fibre SC
- - Netelligent 100 FDDI DAS UTP
- - Netelligent 100 FDDI SAS UTP
- - Netelligent 100 FDDI SAS Fibre MIC
-***
-
-
-(3) GENERAL INFORMATION
-=======================
-
-From v2.01 on, the driver is integrated in the linux kernel sources.
-Therefore, the installation is the same as for any other adapter
-supported by the kernel.
-Refer to the manual of your distribution about the installation
-of network adapters.
-Makes my life much easier :-)
-***
-
-
-(4) TROUBLESHOOTING
-===================
-
-If you run into problems during installation, check those items:
-
-Problem: The FDDI adapter cannot be found by the driver.
-Reason: Look in /proc/pci for the following entry:
- 'FDDI network controller: SysKonnect SK-FDDI-PCI ...'
- If this entry exists, then the FDDI adapter has been
- found by the system and should be able to be used.
- If this entry does not exist or if the file '/proc/pci'
- is not there, then you may have a hardware problem or PCI
- support may not be enabled in your kernel.
- The adapter can be checked using the diagnostic program
- which is available from the SysKonnect web site:
- www.syskonnect.de
- Some COMPAQ machines have a problem with PCI under
- Linux. This is described in the 'PCI howto' document
- (included in some distributions or available from the
- www, e.g. at 'www.linux.org') and no workaround is available.
-
-Problem: You want to use your computer as a router between
- multiple IP subnetworks (using multiple adapters), but
- you cannot reach computers in other subnetworks.
-Reason: Either the router's kernel is not configured for IP
- forwarding or there is a problem with the routing table
- and gateway configuration in at least one of the
- computers.
-
-If your problem is not listed here, please contact our
-technical support for help.
-You can send email to:
- linux@syskonnect.de
-When contacting our technical support,
-please ensure that the following information is available:
-- System Manufacturer and Model
-- Boards in your system
-- Distribution
-- Kernel version
-
-***
-
-
-(5) FUNCTION OF THE ADAPTER LEDS
-================================
-
- The functionality of the LED's on the FDDI network adapters was
- changed in SMT version v2.82. With this new SMT version, the yellow
- LED works as a ring operational indicator. An active yellow LED
- indicates that the ring is down. The green LED on the adapter now
- works as a link indicator where an active GREEN LED indicates that
- the respective port has a physical connection.
-
- With versions of SMT prior to v2.82 a ring up was indicated if the
- yellow LED was off while the green LED(s) showed the connection
- status of the adapter. During a ring down the green LED was off and
- the yellow LED was on.
-
- All implementations indicate that a driver is not loaded if
- all LEDs are off.
-
-***
-
-
-(6) HISTORY
-===========
-
-v2.06 (20000511) (In-Kernel version)
- New features:
- - 64 bit support
- - new pci dma interface
- - in kernel 2.3.99
-
-v2.05 (20000217) (In-Kernel version)
- New features:
- - Changes for 2.3.45 kernel
-
-v2.04 (20000207) (Standalone version)
- New features:
- - Added rx/tx byte counter
-
-v2.03 (20000111) (Standalone version)
- Problems fixed:
- - Fixed printk statements from v2.02
-
-v2.02 (991215) (Standalone version)
- Problems fixed:
- - Removed unnecessary output
- - Fixed path for "printver.sh" in makefile
-
-v2.01 (991122) (In-Kernel version)
- New features:
- - Integration in Linux kernel sources
- - Support for memory mapped I/O.
-
-v2.00 (991112)
- New features:
- - Full source released under GPL
-
-v1.05 (991023)
- Problems fixed:
- - Compilation with kernel version 2.2.13 failed
-
-v1.04 (990427)
- Changes:
- - New SMT module included, changing LED functionality
- Problems fixed:
- - Synchronization on SMP machines was buggy
-
-v1.03 (990325)
- Problems fixed:
- - Interrupt routing on SMP machines could be incorrect
-
-v1.02 (990310)
- New features:
- - Support for kernel versions 2.2.x added
- - Kernel patch instead of private duplicate of kernel functions
-
-v1.01 (980812)
- Problems fixed:
- Connection hangup with telnet
- Slow telnet connection
-
-v1.00 beta 01 (980507)
- New features:
- None.
- Problems fixed:
- None.
- Known limitations:
- - tar archive instead of standard package format (rpm).
- - FDDI statistic is empty.
- - not tested with 2.1.xx kernels
- - integration in kernel not tested
- - not tested simultaneously with FDDI adapters from other vendors.
- - only X86 processors supported.
- - SBA (Synchronous Bandwidth Allocator) parameters can
- not be configured.
- - does not work on some COMPAQ machines. See the PCI howto
- document for details about this problem.
- - data corruption with kernel versions below 2.0.33.
-
-*** End of information file ***