diff options
Diffstat (limited to 'Documentation')
94 files changed, 2423 insertions, 571 deletions
diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre index ec4a79e3a807..b4be5f1db4b7 100644 --- a/Documentation/ABI/testing/debugfs-hisi-hpre +++ b/Documentation/ABI/testing/debugfs-hisi-hpre @@ -33,7 +33,7 @@ Contact: linux-crypto@vger.kernel.org Description: Dump debug registers from the HPRE. Only available for PF. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_regs +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/regs Date: Sep 2019 Contact: linux-crypto@vger.kernel.org Description: Dump debug registers from the QM. @@ -44,14 +44,97 @@ What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q Date: Sep 2019 Contact: linux-crypto@vger.kernel.org Description: One QM may contain multiple queues. Select specific queue to - show its debug registers in above qm_regs. + show its debug registers in above regs. Only available for PF. What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable Date: Sep 2019 Contact: linux-crypto@vger.kernel.org -Description: QM debug registers(qm_regs) read clear control. 1 means enable +Description: QM debug registers(regs) read clear control. 1 means enable register read clear, otherwise 0. Writing to this file has no functional effect, only enable or disable counters clear after reading of these registers. Only available for PF. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/err_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of invalid interrupts for + QM task completion. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/aeq_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of QM async event queue interrupts. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/abnormal_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of interrupts for QM abnormal event. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/create_qp_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of queue allocation errors. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/mb_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of failed QM mailbox commands. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/status +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the status of the QM. + Four states: initiated, started, stopped and closed. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of sent requests. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/recv_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of received requests. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_busy_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of requests sent + with returning busy. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_fail_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of completed but error requests. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/invalid_req_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of invalid requests being received. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/overtime_thrhld +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Set the threshold time for counting the request which is + processed longer than the threshold. + 0: disable(default), 1: 1 microsecond. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/over_thrhld_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of time out requests. + Available for both PF and VF, and take no other effect on HPRE. diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec index 06adb899495e..85feb4408e0f 100644 --- a/Documentation/ABI/testing/debugfs-hisi-sec +++ b/Documentation/ABI/testing/debugfs-hisi-sec @@ -1,10 +1,4 @@ -What: /sys/kernel/debug/hisi_sec/<bdf>/sec_dfx -Date: Oct 2019 -Contact: linux-crypto@vger.kernel.org -Description: Dump the debug registers of SEC cores. - Only available for PF. - -What: /sys/kernel/debug/hisi_sec/<bdf>/clear_enable +What: /sys/kernel/debug/hisi_sec2/<bdf>/clear_enable Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: Enabling/disabling of clear action after reading @@ -12,7 +6,7 @@ Description: Enabling/disabling of clear action after reading 0: disable, 1: enable. Only available for PF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec/<bdf>/current_qm +What: /sys/kernel/debug/hisi_sec2/<bdf>/current_qm Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: One SEC controller has one PF and multiple VFs, each function @@ -20,24 +14,100 @@ Description: One SEC controller has one PF and multiple VFs, each function qm refers to. Only available for PF. -What: /sys/kernel/debug/hisi_sec/<bdf>/qm/qm_regs +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_regs Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: Dump of QM related debug registers. Available for PF and VF in host. VF in guest currently only has one debug register. -What: /sys/kernel/debug/hisi_sec/<bdf>/qm/current_q +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/current_q Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: One QM of SEC may contain multiple queues. Select specific - queue to show its debug registers in above 'qm_regs'. + queue to show its debug registers in above 'regs'. Only available for PF. -What: /sys/kernel/debug/hisi_sec/<bdf>/qm/clear_enable +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/clear_enable Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: Enabling/disabling of clear action after reading the SEC's QM debug registers. 0: disable, 1: enable. Only available for PF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/err_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of invalid interrupts for + QM task completion. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/aeq_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of QM async event queue interrupts. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/abnormal_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of interrupts for QM abnormal event. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/create_qp_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of queue allocation errors. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/mb_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of failed QM mailbox commands. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/status +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the status of the QM. + Four states: initiated, started, stopped and closed. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of sent requests. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/recv_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of received requests. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_busy_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of requests sent with returning busy. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/err_bd_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of BD type error requests + to be received. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/invalid_req_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of invalid requests being received. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/done_flag_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of completed but marked error requests + to be received. + Available for both PF and VF, and take no other effect on SEC. diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip index a7c63e6c4bc3..3034a2bf99ca 100644 --- a/Documentation/ABI/testing/debugfs-hisi-zip +++ b/Documentation/ABI/testing/debugfs-hisi-zip @@ -26,7 +26,7 @@ Description: One ZIP controller has one PF and multiple VFs, each function has a QM. Select the QM which below qm refers to. Only available for PF. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/qm_regs +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/regs Date: Nov 2018 Contact: linux-crypto@vger.kernel.org Description: Dump of QM related debug registers. @@ -37,14 +37,78 @@ What: /sys/kernel/debug/hisi_zip/<bdf>/qm/current_q Date: Nov 2018 Contact: linux-crypto@vger.kernel.org Description: One QM may contain multiple queues. Select specific queue to - show its debug registers in above qm_regs. + show its debug registers in above regs. Only available for PF. What: /sys/kernel/debug/hisi_zip/<bdf>/qm/clear_enable Date: Nov 2018 Contact: linux-crypto@vger.kernel.org -Description: QM debug registers(qm_regs) read clear control. 1 means enable +Description: QM debug registers(regs) read clear control. 1 means enable register read clear, otherwise 0. Writing to this file has no functional effect, only enable or disable counters clear after reading of these registers. Only available for PF. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/err_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of invalid interrupts for + QM task completion. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/aeq_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of QM async event queue interrupts. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/abnormal_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of interrupts for QM abnormal event. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/create_qp_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of queue allocation errors. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/mb_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of failed QM mailbox commands. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/status +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the status of the QM. + Four states: initiated, started, stopped and closed. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of sent requests. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/recv_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of received requests. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_busy_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of requests received + with returning busy. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/err_bd_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of BD type error requests + to be received. + Available for both PF and VF, and take no other effect on ZIP. diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst index c00f9f11e3f3..8439d2ae689b 100644 --- a/Documentation/admin-guide/device-mapper/dm-integrity.rst +++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst @@ -182,12 +182,15 @@ fix_padding space-efficient. If this option is not present, large padding is used - that is for compatibility with older kernels. - -The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can -be changed when reloading the target (load an inactive table and swap the -tables with suspend and resume). The other arguments should not be changed -when reloading the target because the layout of disk data depend on them -and the reloaded target would be non-functional. +allow_discards + Allow block discard requests (a.k.a. TRIM) for the integrity device. + Discards are only allowed to devices using internal hash. + +The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and +allow_discards can be changed when reloading the target (load an inactive +table and swap the tables with suspend and resume). The other arguments +should not be changed when reloading the target because the layout of disk +data depend on them and the reloaded target would be non-functional. The layout of the formatted block device: diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index f2a93c8679e8..7bc83f3d9bdf 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5187,8 +5187,7 @@ usbcore.old_scheme_first= [USB] Start with the old device initialization - scheme, applies only to low and full-speed devices - (default 0 = off). + scheme (default 0 = off). usbcore.usbfs_memory_mb= [USB] Memory limit (in MB) for buffers allocated by diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index 39c95c0e13d3..0d427fd10941 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -390,9 +390,17 @@ When ``kptr_restrict`` is set to 2, kernel pointers printed using modprobe ======== -This gives the full path of the modprobe command which the kernel will -use to load modules. This can be used to debug module loading -requests:: +The full path to the usermode helper for autoloading kernel modules, +by default "/sbin/modprobe". This binary is executed when the kernel +requests a module. For example, if userspace passes an unknown +filesystem type to mount(), then the kernel will automatically request +the corresponding filesystem module by executing this usermode helper. +This usermode helper should insert the needed module into the kernel. + +This sysctl only affects module autoloading. It has no effect on the +ability to explicitly insert modules. + +This sysctl can be used to debug module loading requests:: echo '#! /bin/sh' > /tmp/modprobe echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe @@ -400,10 +408,15 @@ requests:: chmod a+x /tmp/modprobe echo /tmp/modprobe > /proc/sys/kernel/modprobe -This only applies when the *kernel* is requesting that the module be -loaded; it won't have any effect if the module is being loaded -explicitly using ``modprobe`` from userspace. +Alternatively, if this sysctl is set to the empty string, then module +autoloading is completely disabled. The kernel will not try to +execute a usermode helper at all, nor will it call the +kernel_module_request LSM hook. +If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration, +then the configured static usermode helper overrides this sysctl, +except that the empty string is still accepted to completely disable +module autoloading as described above. modules_disabled ================ @@ -446,28 +459,6 @@ Notes: successful IPC object allocation. If an IPC object allocation syscall fails, it is undefined if the value remains unmodified or is reset to -1. -modprobe: -========= - -The path to the usermode helper for autoloading kernel modules, by -default "/sbin/modprobe". This binary is executed when the kernel -requests a module. For example, if userspace passes an unknown -filesystem type to mount(), then the kernel will automatically request -the corresponding filesystem module by executing this usermode helper. -This usermode helper should insert the needed module into the kernel. - -This sysctl only affects module autoloading. It has no effect on the -ability to explicitly insert modules. - -If this sysctl is set to the empty string, then module autoloading is -completely disabled. The kernel will not try to execute a usermode -helper at all, nor will it call the kernel_module_request LSM hook. - -If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration, -then the configured static usermode helper overrides this sysctl, -except that the empty string is still accepted to completely disable -module autoloading as described above. - nmi_watchdog ============ diff --git a/Documentation/arm64/amu.rst b/Documentation/arm64/amu.rst index 5057b11100ed..036783ee327f 100644 --- a/Documentation/arm64/amu.rst +++ b/Documentation/arm64/amu.rst @@ -23,13 +23,14 @@ optional external memory-mapped interface. Version 1 of the Activity Monitors architecture implements a counter group of four fixed and architecturally defined 64-bit event counters. - - CPU cycle counter: increments at the frequency of the CPU. - - Constant counter: increments at the fixed frequency of the system - clock. - - Instructions retired: increments with every architecturally executed - instruction. - - Memory stall cycles: counts instruction dispatch stall cycles caused by - misses in the last level cache within the clock domain. + +- CPU cycle counter: increments at the frequency of the CPU. +- Constant counter: increments at the fixed frequency of the system + clock. +- Instructions retired: increments with every architecturally executed + instruction. +- Memory stall cycles: counts instruction dispatch stall cycles caused by + misses in the last level cache within the clock domain. When in WFI or WFE these counters do not increment. @@ -57,11 +58,12 @@ counters, only the presence of the extension. Firmware (code running at higher exception levels, e.g. arm-tf) support is needed to: - - Enable access for lower exception levels (EL2 and EL1) to the AMU - registers. - - Enable the counters. If not enabled these will read as 0. - - Save/restore the counters before/after the CPU is being put/brought up - from the 'off' power state. + +- Enable access for lower exception levels (EL2 and EL1) to the AMU + registers. +- Enable the counters. If not enabled these will read as 0. +- Save/restore the counters before/after the CPU is being put/brought up + from the 'off' power state. When using kernels that have this feature enabled but boot with broken firmware the user may experience panics or lockups when accessing the @@ -78,10 +80,11 @@ are not trapped in EL2/EL3. The fixed counters of AMUv1 are accessible though the following system register definitions: - - SYS_AMEVCNTR0_CORE_EL0 - - SYS_AMEVCNTR0_CONST_EL0 - - SYS_AMEVCNTR0_INST_RET_EL0 - - SYS_AMEVCNTR0_MEM_STALL_EL0 + +- SYS_AMEVCNTR0_CORE_EL0 +- SYS_AMEVCNTR0_CONST_EL0 +- SYS_AMEVCNTR0_INST_RET_EL0 +- SYS_AMEVCNTR0_MEM_STALL_EL0 Auxiliary platform specific counters can be accessed using SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15. @@ -93,9 +96,10 @@ Userspace access ---------------- Currently, access from userspace to the AMU registers is disabled due to: - - Security reasons: they might expose information about code executed in - secure mode. - - Purpose: AMU counters are intended for system management use. + +- Security reasons: they might expose information about code executed in + secure mode. +- Purpose: AMU counters are intended for system management use. Also, the presence of the feature is not visible to userspace. @@ -105,8 +109,9 @@ Virtualization Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM guest side is disabled due to: - - Security reasons: they might expose information about code executed - by other guests or the host. + +- Security reasons: they might expose information about code executed + by other guests or the host. Any attempt to access the AMU registers will result in an UNDEFINED exception being injected into the guest. diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst index 8ebe46b1af39..5dfcc4592b23 100644 --- a/Documentation/core-api/printk-formats.rst +++ b/Documentation/core-api/printk-formats.rst @@ -112,6 +112,20 @@ used when printing stack backtraces. The specifier takes into consideration the effect of compiler optimisations which may occur when tail-calls are used and marked with the noreturn GCC attribute. +Probed Pointers from BPF / tracing +---------------------------------- + +:: + + %pks kernel string + %pus user string + +The ``k`` and ``u`` specifiers are used for printing prior probed memory from +either kernel memory (k) or user memory (u). The subsequent ``s`` specifier +results in printing a string. For direct use in regular vsnprintf() the (k) +and (u) annotation is ignored, however, when used out of BPF's bpf_trace_printk(), +for example, it reads the memory it is pointing to without faulting. + Kernel Pointers --------------- diff --git a/Documentation/core-api/timekeeping.rst b/Documentation/core-api/timekeeping.rst index c0ffa30c7c37..729e24864fe7 100644 --- a/Documentation/core-api/timekeeping.rst +++ b/Documentation/core-api/timekeeping.rst @@ -154,9 +154,9 @@ architectures. These are the recommended replacements: Use ktime_get() or ktime_get_ts64() instead. -.. c:function:: struct timeval do_gettimeofday( void ) - struct timespec getnstimeofday( void ) - struct timespec64 getnstimeofday64( void ) +.. c:function:: void do_gettimeofday( struct timeval * ) + void getnstimeofday( struct timespec * ) + void getnstimeofday64( struct timespec64 * ) void ktime_get_real_ts( struct timespec * ) ktime_get_real_ts64() is a direct replacement, but consider using diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 1df680d07461..7782d9985082 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -2,6 +2,7 @@ DT_DOC_CHECKER ?= dt-doc-validate DT_EXTRACT_EX ?= dt-extract-example DT_MK_SCHEMA ?= dt-mk-schema +DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u) quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<) cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \ @@ -13,16 +14,18 @@ $(obj)/%.example.dts: $(src)/%.yaml FORCE # Use full schemas when checking %.example.dts DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml +find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \ + -name 'processed-schema*' ! \ + -name '*.example.dt.yaml' \) + quiet_cmd_mk_schema = SCHEMA $@ - cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs) + cmd_mk_schema = rm -f $@ ; \ + $(if $(DT_MK_SCHEMA_FLAGS), \ + echo $(real-prereqs), \ + $(find_cmd)) | \ + xargs $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) >> $@ -DT_DOCS = $(addprefix $(src)/, \ - $(shell \ - cd $(srctree)/$(src) && \ - find * \( -name '*.yaml' ! \ - -name 'processed-schema*' ! \ - -name '*.example.dt.yaml' \) \ - )) +DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||') DT_SCHEMA_FILES ?= $(DT_DOCS) @@ -37,7 +40,7 @@ override DTC_FLAGS := \ $(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE $(call if_changed,mk_schema) -$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u +$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG) $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE $(call if_changed,mk_schema) diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index aa0738b4d534..e713a6fe4cf7 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -42,6 +42,10 @@ properties: description: See section 2.3.9 of the DeviceTree Specification. + '#address-cells': true + + '#size-cells': true + required: - "#interconnect-cells" - compatible @@ -59,6 +63,8 @@ examples: compatible = "allwinner,sun5i-a13-mbus"; reg = <0x01c01000 0x1000>; clocks = <&ccu CLK_MBUS>; + #address-cells = <1>; + #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0x20000000>; #interconnect-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml index de9a465096db..444aeea27db8 100644 --- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -91,7 +91,7 @@ required: examples: - | - vco1: clock@00 { + vco1: clock { compatible = "arm,impd1-vco1"; #clock-cells = <0>; lock-offset = <0x08>; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt index a6b2b2b8f3d9..d3c2a4914ea2 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt @@ -1,5 +1,5 @@ -Analog Device ADV7123 Video DAC -------------------------------- +Analog Devices ADV7123 Video DAC +-------------------------------- The ADV7123 is a digital-to-analog converter that outputs VGA signals from a parallel video input. diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index e8ddec5d9d91..659523f538bf 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -1,5 +1,5 @@ -Analog Device ADV7511(W)/13/33/35 HDMI Encoders ------------------------------------------ +Analog Devices ADV7511(W)/13/33/35 HDMI Encoders +------------------------------------------------ The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index fd931b293816..b900973b5f7b 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -37,7 +37,6 @@ examples: dsi { #address-cells = <1>; #size-cells = <0>; - reg = <0xff450000 0x1000>; panel@0 { compatible = "leadtek,ltk500hd1829"; diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml index d0083301acbe..946dd354256c 100644 --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml @@ -96,12 +96,20 @@ properties: If set, reverse the bit order described in the data mappings below on all data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6. + port: true + ports: true + required: - compatible - data-mapping - width-mm - height-mm - panel-timing - - port + +oneOf: + - required: + - port + - required: + - ports ... diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index d9fdb58e06b4..6913923df569 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -37,7 +37,6 @@ examples: dsi { #address-cells = <1>; #size-cells = <0>; - reg = <0xff450000 0x1000>; panel@0 { compatible = "xinpeng,xpp055c272"; diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt index b38ee732efa9..cd17684aaab5 100644 --- a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt +++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt @@ -1,4 +1,4 @@ -Analog Device AXI-DMAC DMA controller +Analog Devices AXI-DMAC DMA controller Required properties: - compatible: Must be "adi,axi-dmac-1.00.a". diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt index e77b08ebcd06..ee1754739b4b 100644 --- a/Documentation/devicetree/bindings/dma/fsl-edma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt @@ -10,7 +10,8 @@ Required properties: - compatible : - "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC - "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp - - "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC + - "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the + LS1028A SoC. - reg : Specifies base physical address(s) and size of the eDMA registers. The 1st region is eDMA control register's address and size. The 2nd and the 3rd regions are programmable channel multiplexing diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml index 86cfb599256e..371f18773198 100644 --- a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml +++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml @@ -22,9 +22,7 @@ properties: const: socionext,uniphier-xdmac reg: - items: - - description: XDMAC base register region (offset and length) - - description: XDMAC extension register region (offset and length) + maxItems: 1 interrupts: maxItems: 1 @@ -49,12 +47,13 @@ required: - reg - interrupts - "#dma-cells" + - dma-channels examples: - | xdmac: dma-controller@5fc10000 { compatible = "socionext,uniphier-xdmac"; - reg = <0x5fc10000 0x1000>, <0x5fc20000 0x800>; + reg = <0x5fc10000 0x5300>; interrupts = <0 188 4>; #dma-cells = <2>; dma-channels = <16>; diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 57a240d2d026..7db78767c02d 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -2,7 +2,7 @@ # Copyright 2019 Analog Devices Inc. %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml# +$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices AXI FAN Control Device Tree Bindings @@ -47,7 +47,7 @@ required: examples: - | - fpga_axi: fpga-axi@0 { + fpga_axi: fpga-axi { #address-cells = <0x2>; #size-cells = <0x1>; diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index 76985034ea73..46c441574f98 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/adt7475.yaml# +$id: http://devicetree.org/schemas/hwmon/adt7475.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: ADT7475 hwmon sensor diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml new file mode 100644 index 000000000000..84ae4cdd08ed --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/baikal,bt1-pvt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 PVT Sensor + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + Baikal-T1 SoC provides an embedded process, voltage and temperature + sensor to monitor an internal SoC environment (chip temperature, supply + voltage and process monitor) and on time detect critical situations, + which may cause the system instability and even damages. The IP-block + is based on the Analog Bits PVT sensor, but is equipped with a dedicated + control wrapper, which provides a MMIO registers-based access to the + sensor core functionality (APB3-bus based) and exposes an additional + functions like thresholds/data ready interrupts, its status and masks, + measurements timeout. Its internal structure is depicted on the next + diagram: + + Analog Bits core Bakal-T1 PVT control block + +--------------------+ +------------------------+ + | Temperature sensor |-+ +------| Sensors control | + |--------------------| |<---En---| |------------------------| + | Voltage sensor |-|<--Mode--| +--->| Sampled data | + |--------------------| |<--Trim--+ | |------------------------| + | Low-Vt sensor |-| | +--| Thresholds comparator | + |--------------------| |---Data----| | |------------------------| + | High-Vt sensor |-| | +->| Interrupts status | + |--------------------| |--Valid--+-+ | |------------------------| + | Standard-Vt sensor |-+ +---+--| Interrupts mask | + +--------------------+ |------------------------| + ^ | Interrupts timeout | + | +------------------------+ + | ^ ^ + Rclk-----+----------------------------------------+ | + APB3-------------------------------------------------+ + + This bindings describes the external Baikal-T1 PVT control interfaces + like MMIO registers space, interrupt request number and clocks source. + These are then used by the corresponding hwmon device driver to + implement the sysfs files-based access to the sensors functionality. + +properties: + compatible: + const: baikal,bt1-pvt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: PVT reference clock + - description: APB3 interface clock + + clock-names: + items: + - const: ref + - const: pclk + + "#thermal-sensor-cells": + description: Baikal-T1 can be referenced as the CPU thermal-sensor + const: 0 + + baikal,pvt-temp-offset-millicelsius: + description: | + Temperature sensor trimming factor. It can be used to manually adjust the + temperature measurements within 7.130 degrees Celsius. + maxItems: 1 + items: + default: 0 + minimum: 0 + maximum: 7130 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + + pvt@1f200000 { + compatible = "baikal,bt1-pvt"; + reg = <0x1f200000 0x1000>; + #thermal-sensor-cells = <0>; + + interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>; + + baikal,pvt-temp-trim-millicelsius = <1000>; + + clocks = <&ccu_sys>, <&ccu_sys>; + clock-names = "ref", "pclk"; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 933ba37944d7..dd8eb15aeb63 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#" +$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: STMicroelectronics STM32 ADC bindings diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt index f0bbd7e1029b..502e1e55adbd 100644 --- a/Documentation/devicetree/bindings/iio/dac/ad5755.txt +++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt @@ -1,4 +1,4 @@ -* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver +* Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver Required properties: - compatible: Has to contain one of the following: diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index d9c25cf4b92f..58d81ca43460 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -2,7 +2,7 @@ # Copyright 2020 Analog Devices Inc. %YAML 1.2 --- -$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml# +$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices AD5770R DAC device driver @@ -49,93 +49,86 @@ properties: asserted during driver probe. maxItems: 1 - channel0: + channel@0: description: Represents an external channel which are connected to the DAC. Channel 0 can act both as a current source and sink. type: object properties: - num: + reg: description: This represents the channel number. - items: - const: 0 + const: 0 adi,range-microamp: description: Output range of the channel. oneOf: - - $ref: /schemas/types.yaml#/definitions/int32-array - items: - - enum: [0 300000] - - enum: [-60000 0] - - enum: [-60000 300000] + - const: 0 + - const: 300000 + - items: + - const: -60000 + - const: 0 + - items: + - const: -60000 + - const: 300000 - channel1: + channel@1: description: Represents an external channel which are connected to the DAC. type: object properties: - num: + reg: description: This represents the channel number. - items: - const: 1 + const: 1 adi,range-microamp: description: Output range of the channel. - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - - enum: [0 140000] - - enum: [0 250000] + items: + - const: 0 + - enum: [ 140000, 250000 ] - channel2: + channel@2: description: Represents an external channel which are connected to the DAC. type: object properties: - num: + reg: description: This represents the channel number. - items: - const: 2 + const: 2 adi,range-microamp: description: Output range of the channel. - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - - enum: [0 140000] - - enum: [0 250000] + items: + - const: 0 + - enum: [ 55000, 150000 ] patternProperties: "^channel@([3-5])$": type: object description: Represents the external channels which are connected to the DAC. properties: - num: + reg: description: This represents the channel number. - items: - minimum: 3 - maximum: 5 + minimum: 3 + maximum: 5 adi,range-microamp: description: Output range of the channel. - oneOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - - enum: [0 45000] - - enum: [0 100000] + items: + - const: 0 + - enum: [ 45000, 100000 ] required: - reg -- diff-channels -- channel0 -- channel1 -- channel2 -- channel3 -- channel4 -- channel5 +- channel@0 +- channel@1 +- channel@2 +- channel@3 +- channel@4 +- channel@5 examples: - | @@ -144,40 +137,42 @@ examples: #size-cells = <0>; ad5770r@0 { - compatible = "ad5770r"; + compatible = "adi,ad5770r"; reg = <0>; spi-max-frequency = <1000000>; vref-supply = <&vref>; adi,external-resistor; reset-gpios = <&gpio 22 0>; + #address-cells = <1>; + #size-cells = <0>; channel@0 { - num = <0>; - adi,range-microamp = <(-60000) 300000>; + reg = <0>; + adi,range-microamp = <0 300000>; }; channel@1 { - num = <1>; + reg = <1>; adi,range-microamp = <0 140000>; }; channel@2 { - num = <2>; + reg = <2>; adi,range-microamp = <0 55000>; }; channel@3 { - num = <3>; + reg = <3>; adi,range-microamp = <0 45000>; }; channel@4 { - num = <4>; + reg = <4>; adi,range-microamp = <0 45000>; }; channel@5 { - num = <5>; + reg = <5>; adi,range-microamp = <0 45000>; }; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 8d58709d4b47..383d64a91854 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -109,7 +109,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - i2c@00000000 { + i2c { #address-cells = <1>; #size-cells = <0>; edt-ft5x06@38 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 9c6b91fee477..26f1fcf0857a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -56,9 +56,8 @@ properties: cell with zero. allOf: - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 4 - maxItems: 4 + - minItems: 4 + maxItems: 4 required: diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index 12516bd89cf9..611bda38d187 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -97,30 +97,35 @@ examples: #include <dt-bindings/clock/tegra186-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - memory-controller@2c00000 { - compatible = "nvidia,tegra186-mc"; - reg = <0x0 0x02c00000 0x0 0xb0000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - + bus { #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>; + memory-controller@2c00000 { + compatible = "nvidia,tegra186-mc"; + reg = <0x0 0x02c00000 0x0 0xb0000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>; - /* - * Memory clients have access to all 40 bits that the memory - * controller can address. - */ - dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + /* + * Memory clients have access to all 40 bits that the memory + * controller can address. + */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; - external-memory-controller@2c60000 { - compatible = "nvidia,tegra186-emc"; - reg = <0x0 0x02c60000 0x0 0x50000>; - interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA186_CLK_EMC>; - clock-names = "emc"; + external-memory-controller@2c60000 { + compatible = "nvidia,tegra186-emc"; + reg = <0x0 0x02c60000 0x0 0x50000>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_EMC>; + clock-names = "emc"; - nvidia,bpmp = <&bpmp>; + nvidia,bpmp = <&bpmp>; + }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml new file mode 100644 index 000000000000..487a8445722e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gateworks System Controller + +description: | + The Gateworks System Controller (GSC) is a device present across various + Gateworks product families that provides a set of system related features + such as the following (refer to the board hardware user manuals to see what + features are present) + - Watchdog Timer + - GPIO + - Pushbutton controller + - Hardware monitor with ADC's for temperature and voltage rails and + fan controller + +maintainers: + - Tim Harvey <tharvey@gateworks.com> + - Robert Jones <rjones@gateworks.com> + +properties: + $nodename: + pattern: "gsc@[0-9a-f]{1,2}" + compatible: + const: gw,gsc + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + adc: + type: object + description: Optional hardware monitoring module + + properties: + compatible: + const: gw,gsc-adc + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^channel@[0-9]+$": + type: object + description: | + Properties for a single ADC which can report cooked values + (i.e. temperature sensor based on thermister), raw values + (i.e. voltage rail with a pre-scaling resistor divider). + + properties: + reg: + description: Register of the ADC + maxItems: 1 + + label: + description: Name of the ADC input + + gw,mode: + description: | + conversion mode: + 0 - temperature, in C*10 + 1 - pre-scaled voltage value + 2 - scaled voltage based on an optional resistor divider + and optional offset + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + gw,voltage-divider-ohms: + description: Values of resistors for divider on raw ADC input + maxItems: 2 + items: + minimum: 1000 + maximum: 1000000 + + gw,voltage-offset-microvolt: + description: | + A positive voltage offset to apply to a raw ADC + (i.e. to compensate for a diode drop). + minimum: 0 + maximum: 1000000 + + required: + - gw,mode + - reg + - label + + required: + - compatible + - "#address-cells" + - "#size-cells" + +patternProperties: + "^fan-controller@[0-9a-f]+$": + type: object + description: Optional fan controller + + properties: + compatible: + const: gw,gsc-fan + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + description: The fan controller base address + maxItems: 1 + + required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#address-cells" + - "#size-cells" + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* A0: Board Temperature */ + reg = <0x00>; + label = "temp"; + gw,mode = <0>; + }; + + channel@2 { /* A1: Input Voltage (raw ADC) */ + reg = <0x02>; + label = "vdd_vin"; + gw,mode = <1>; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@b { /* A2: Battery voltage */ + reg = <0x0b>; + label = "vdd_bat"; + gw,mode = <1>; + }; + }; + + fan-controller@2c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gw,gsc-fan"; + reg = <0x2c>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt index 5f2f07c09c90..4ed52184d081 100644 --- a/Documentation/devicetree/bindings/mfd/max8998.txt +++ b/Documentation/devicetree/bindings/mfd/max8998.txt @@ -73,6 +73,8 @@ number as described in MAX8998 datasheet. - ESAFEOUT1: (ldo19) - ESAFEOUT2: (ld020) + - CHARGER: main battery charger current control + Standard regulator bindings are used inside regulator subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for more details. @@ -113,5 +115,11 @@ Example: regulator-always-on; regulator-boot-on; }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <800000>; + }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml index aa922c560fcc..65018a019e1d 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml @@ -123,7 +123,9 @@ examples: #include <dt-bindings/leds/common.h> i2c { - pmic: pmic@4b { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { compatible = "rohm,bd71837"; reg = <0x4b>; interrupt-parent = <&gpio1>; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml index 402e40dfe0b8..77bcca2d414f 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml @@ -128,7 +128,9 @@ examples: #include <dt-bindings/leds/common.h> i2c { - pmic: pmic@4b { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { compatible = "rohm,bd71847"; reg = <0x4b>; interrupt-parent = <&gpio1>; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index d9ad9260e348..be7faa6dc055 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -259,8 +259,6 @@ properties: additionalProperties: false - additionalProperties: false - additionalProperties: false required: @@ -274,7 +272,7 @@ examples: - | #include <dt-bindings/mfd/st,stpmic1.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - i2c@0 { + i2c { #address-cells = <1>; #size-cells = <0>; pmic@33 { diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt index 5201bc15fdd6..cfd1afdc6e94 100644 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt @@ -110,6 +110,9 @@ Ethernet switch connected via MDIO to the host, CPU port wired to eth0: #size-cells = <0>; ports { + #address-cells = <1>; + #size-cells = <0>; + port0@0 { reg = <0>; label = "lan1"; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 8927941c74bb..5aa141ccc113 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -45,6 +45,9 @@ properties: bits of a vendor specific ID. - items: - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" + - const: ethernet-phy-ieee802.3-c22 + - items: + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" - const: ethernet-phy-ieee802.3-c45 reg: diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 5b88fae0307d..ff8b0f211aa1 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -22,6 +22,8 @@ Optional properties: - fsl,err006687-workaround-present: If present indicates that the system has the hardware workaround for ERR006687 applied and does not need a software workaround. +- gpr: phandle of SoC general purpose register mode. Required for wake on LAN + on some SoCs -interrupt-names: names of the interrupts listed in interrupts property in the same order. The defaults if not specified are __Number of interrupts__ __Default__ diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml index b9f90081046f..67df3fe861ee 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml @@ -48,6 +48,7 @@ examples: switch@10 { compatible = "qca,qca8337"; + reg = <0x10>; /* ... */ }; }; diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt index beca6466d59a..d2202791c1d4 100644 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt @@ -29,7 +29,7 @@ Required properties for compatible string qcom,wcn399x-bt: Optional properties for compatible string qcom,wcn399x-bt: - - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt + - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - firmware-name: specify the name of nvm firmware to load - clocks: clock provided to the controller diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 144ae29e7141..f8bd28ff31c1 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -97,7 +97,7 @@ then: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 maximum: 63 - default: 0 + default: 32 qcom,charge-ctrl-value: description: @@ -130,7 +130,7 @@ then: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 maximum: 3 - default: 2 + default: 0 qcom,preemphasis-width: description: @@ -152,7 +152,7 @@ then: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 maximum: 3 - default: 0 + default: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index fd1982c56104..3f913d6d1c3d 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -146,7 +146,7 @@ patternProperties: bindings specified in Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt Torrent SERDES should follow the bindings specified in - Documentation/devicetree/bindings/phy/phy-cadence-dp.txt + Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml index 24c217b76580..41ece1d85315 100644 --- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml @@ -31,10 +31,17 @@ additionalProperties: false examples: - | - cros-ec@0 { - compatible = "google,cros-ec-spi"; - cros_ec_pwm: ec-pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; + spi { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; }; }; diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt deleted file mode 100644 index a3106c72fbea..000000000000 --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt +++ /dev/null @@ -1,40 +0,0 @@ -Anatop Voltage regulators - -Required properties: -- compatible: Must be "fsl,anatop-regulator" -- regulator-name: A string used as a descriptive name for regulator outputs -- anatop-reg-offset: Anatop MFD register offset -- anatop-vol-bit-shift: Bit shift for the register -- anatop-vol-bit-width: Number of bits used in the register -- anatop-min-bit-val: Minimum value of this register -- anatop-min-voltage: Minimum voltage of this regulator -- anatop-max-voltage: Maximum voltage of this regulator - -Optional properties: -- anatop-delay-reg-offset: Anatop MFD step time register offset -- anatop-delay-bit-shift: Bit shift for the step time register -- anatop-delay-bit-width: Number of bits used in the step time register -- vin-supply: The supply for this regulator -- anatop-enable-bit: Regulator enable bit offset - -Any property defined as part of the core regulator -binding, defined in regulator.txt, can also be used. - -Example: - - regulator-vddpu { - compatible = "fsl,anatop-regulator"; - regulator-name = "vddpu"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <9>; - anatop-vol-bit-width = <5>; - anatop-delay-reg-offset = <0x170>; - anatop-delay-bit-shift = <24>; - anatop-delay-bit-width = <2>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1300000>; - }; diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml new file mode 100644 index 000000000000..e7b3abe30363 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Anatop Voltage Regulators + +maintainers: + - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: fsl,anatop-regulator + + regulator-name: true + + anatop-reg-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the anatop MFD register offset. + + anatop-vol-bit-shift: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the bit shift for the register. + + anatop-vol-bit-width: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the number of bits used in the register. + + anatop-min-bit-val: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the minimum value of this register. + + anatop-min-voltage: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the minimum voltage of this regulator. + + anatop-max-voltage: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the maximum voltage of this regulator. + + anatop-delay-reg-offset: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the anatop MFD step time register offset. + + anatop-delay-bit-shift: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the bit shift for the step time register. + + anatop-delay-bit-width: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the number of bits used in the step time register. + + anatop-enable-bit: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing regulator enable bit offset. + + vin-supply: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: input supply phandle. + +required: + - compatible + - regulator-name + - anatop-reg-offset + - anatop-vol-bit-shift + - anatop-vol-bit-width + - anatop-min-bit-val + - anatop-min-voltage + - anatop-max-voltage + +unevaluatedProperties: false + +examples: + - | + regulator-vddpu { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1300000>; + }; diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml new file mode 100644 index 000000000000..19cbd5eb2897 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX77826 PMIC + +maintainers: + - Iskren Chernev <iskren.chernev@gmail.com> + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max77826 + + reg: + maxItems: 1 + + regulators: + type: object + allOf: + - $ref: regulator.yaml# + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST + + patternProperties: + "^LDO([1-9]|1[0-5])$": + type: object + allOf: + - $ref: regulator.yaml# + + "^BUCK|BUCKBOOST$": + type: object + allOf: + - $ref: regulator.yaml# + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "maxim,max77826"; + reg = <0x69>; + + regulators { + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <3587500>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index f0acce2029fd..3b019fa6db31 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -37,7 +37,6 @@ properties: type: object additionalProperties: false - additionalProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index a682af0dc67e..ae6e7ab36c58 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -75,7 +75,8 @@ properties: description: | disables over voltage protection of this buck - additionalProperties: false + unevaluatedProperties: false + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml index 71ce032b8cf8..1e52dafcb5c9 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -35,6 +35,8 @@ patternProperties: description: should be "ldo1", ..., "ldo7" + unevaluatedProperties: false + "^BUCK[1-7]$": type: object allOf: @@ -103,5 +105,7 @@ patternProperties: required: - regulator-name - additionalProperties: false + + unevaluatedProperties: false + additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml index a323b1696eee..543d4b52397e 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -41,6 +41,8 @@ patternProperties: description: should be "ldo1", ..., "ldo7" + unevaluatedProperties: false + "^BUCK[1-8]$": type: object allOf: @@ -99,5 +101,7 @@ patternProperties: required: - regulator-name - additionalProperties: false + + unevaluatedProperties: false + additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml index 526fd00bcb16..d797cc23406f 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml @@ -40,6 +40,8 @@ patternProperties: description: should be "ldo1", ..., "ldo6" + unevaluatedProperties: false + "^BUCK[1-6]$": type: object allOf: @@ -93,5 +95,7 @@ patternProperties: required: - regulator-name - additionalProperties: false + + unevaluatedProperties: false + additionalProperties: false diff --git a/Documentation/devicetree/bindings/rng/arm-cctrng.yaml b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml new file mode 100644 index 000000000000..ca6aad19b6ba --- /dev/null +++ b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/arm-cctrng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm TrustZone CryptoCell TRNG engine + +maintainers: + - Hadar Gat <hadar.gat@arm.com> + +description: |+ + Arm TrustZone CryptoCell TRNG (True Random Number Generator) engine. + +properties: + compatible: + enum: + - arm,cryptocell-713-trng + - arm,cryptocell-703-trng + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + arm,rosc-ratio: + description: + Arm TrustZone CryptoCell TRNG engine has 4 ring oscillators. + Sampling ratio values for these 4 ring oscillators. (from calibration) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + maxItems: 4 + + clocks: + maxItems: 1 + +required: + - compatible + - interrupts + - reg + - arm,rosc-ratio + +additionalProperties: false + +examples: + - | + arm_cctrng: rng@60000000 { + compatible = "arm,cryptocell-713-trng"; + interrupts = <0 29 4>; + reg = <0x60000000 0x10000>; + arm,rosc-ratio = <5000 1000 500 0>; + }; diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml index 89ab67f20a7f..c147900f9041 100644 --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml @@ -39,7 +39,7 @@ additionalProperties: false examples: - | - rng { + rng@7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; interrupts = <2 29>; diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index 7cd0e278ed85..a3ba2186d6a1 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -56,6 +56,9 @@ properties: - const: tx - const: rx + power-domains: + maxItems: 1 + rockchip,capture-channels: allOf: - $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt deleted file mode 100644 index ec20c1271e92..000000000000 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Rockchip SPDIF transceiver - -The S/PDIF audio block is a stereo transceiver that allows the -processor to receive and transmit digital audio via an coaxial cable or -a fibre cable. - -Required properties: - -- compatible: should be one of the following: - - "rockchip,rk3066-spdif" - - "rockchip,rk3188-spdif" - - "rockchip,rk3228-spdif" - - "rockchip,rk3288-spdif" - - "rockchip,rk3328-spdif" - - "rockchip,rk3366-spdif" - - "rockchip,rk3368-spdif" - - "rockchip,rk3399-spdif" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the SPDIF interrupt. -- dmas: DMA specifiers for tx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should be "tx" -- clocks: a list of phandle + clock-specifier pairs, one for each entry - in clock-names. -- clock-names: should contain following: - - "hclk": clock for SPDIF controller - - "mclk" : clock for SPDIF bus - -Required properties on RK3288: - - rockchip,grf: the phandle of the syscon node for the general register - file (GRF) - -Example for the rk3188 SPDIF controller: - -spdif: spdif@1011e000 { - compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; - reg = <0x1011e000 0x2000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac1_s 8>; - dma-names = "tx"; - clock-names = "hclk", "mclk"; - clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; - #sound-dai-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml new file mode 100644 index 000000000000..c467152656f7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip-spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SPDIF transceiver + +description: + The S/PDIF audio block is a stereo transceiver that allows the + processor to receive and transmit digital audio via a coaxial or + fibre cable. + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,rk3066-spdif + - const: rockchip,rk3228-spdif + - const: rockchip,rk3328-spdif + - const: rockchip,rk3366-spdif + - const: rockchip,rk3368-spdif + - const: rockchip,rk3399-spdif + - items: + - enum: + - rockchip,rk3188-spdif + - rockchip,rk3288-spdif + - const: rockchip,rk3066-spdif + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock for SPDIF bus + - description: clock for SPDIF controller + + clock-names: + items: + - const: mclk + - const: hclk + + dmas: + maxItems: 1 + + dma-names: + const: tx + + power-domains: + maxItems: 1 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF register. + Required property on RK3288. + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - "#sound-dai-cells" + +if: + properties: + compatible: + contains: + const: rockchip,rk3288-spdif + +then: + required: + - rockchip,grf + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3188-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + spdif: spdif@1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt index ad7ac80a3841..f5e518d099f2 100644 --- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt @@ -26,6 +26,16 @@ Required properties: "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI BRCMSTB SoCs + "brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI + BRCMSTB SoCs + "brcm,spi-bcm7429-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI + BRCMSTB SoCs + "brcm,spi-bcm7435-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI + BRCMSTB SoCs + "brcm,spi-bcm7216-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI + BRCMSTB SoCs + "brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI + BRCMSTB SoCs "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi" : MSPI+BSPI on Cygnus, NSP "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi" : NS2 SoCs diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml new file mode 100644 index 000000000000..4ddb42a4ae05 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/mikrotik,rb4xx-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MikroTik RB4xx series SPI master + +maintainers: + - Gabor Juhos <juhosg@openwrt.org> + - Bert Vermeulen <bert@biot.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + const: mikrotik,rb4xx-spi + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + spi: spi@1f000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mikrotik,rb4xx-spi"; + reg = <0x1f000000 0x10>; + }; + +...
\ No newline at end of file diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 0cf470eaf2a0..5c16cf59ca00 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -61,7 +61,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - soc: soc@0 { + soc: soc { #address-cells = <2>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml new file mode 100644 index 000000000000..c54ac059043f --- /dev/null +++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/renesas,rspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas (Quad) Serial Peripheral Interface (RSPI/QSPI) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,rspi-sh7757 # SH7757 + - const: renesas,rspi # Legacy SH + + - items: + - enum: + - renesas,rspi-r7s72100 # RZ/A1H + - renesas,rspi-r7s9210 # RZ/A2 + - const: renesas,rspi-rz # RZ/A + + - items: + - enum: + - renesas,qspi-r8a7743 # RZ/G1M + - renesas,qspi-r8a7744 # RZ/G1N + - renesas,qspi-r8a7745 # RZ/G1E + - renesas,qspi-r8a77470 # RZ/G1C + - renesas,qspi-r8a7790 # R-Car H2 + - renesas,qspi-r8a7791 # R-Car M2-W + - renesas,qspi-r8a7792 # R-Car V2H + - renesas,qspi-r8a7793 # R-Car M2-N + - renesas,qspi-r8a7794 # R-Car E2 + - const: renesas,qspi # R-Car Gen2 and RZ/G1 + + reg: + maxItems: 1 + + interrupts: + oneOf: + - items: + - description: A combined interrupt + - items: + - description: Error interrupt (SPEI) + - description: Receive Interrupt (SPRI) + - description: Transmit Interrupt (SPTI) + + interrupt-names: + oneOf: + - items: + - const: mux + - items: + - const: error + - const: rx + - const: tx + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + + num-cs: + description: | + Total number of native chip selects. + Hardware limitations related to chip selects: + - When using GPIO chip selects, at least one native chip select must + be left unused, as it will be driven anyway. + minimum: 1 + maximum: 2 + default: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - '#address-cells' + - '#size-cells' + +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - renesas,rspi-rz + then: + properties: + interrupts: + minItems: 3 + required: + - interrupt-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,qspi + then: + required: + - resets + +examples: + - | + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7791-sysc.h> + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7791", "renesas,qspi"; + reg = <0xe6b10000 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt deleted file mode 100644 index 3ed08ee9feba..000000000000 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ /dev/null @@ -1,41 +0,0 @@ -Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface. - -Required properties: -- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or - "jaguar2", or "amazon,alpine-dw-apb-ssi" -- reg : The register base for the controller. For "mscc,<soc>-spi", a second - register set is required (named ICPU_CFG:SPI_MST) -- interrupts : One interrupt, used by the controller. -- #address-cells : <1>, as required by generic SPI binding. -- #size-cells : <0>, also as required by generic SPI binding. -- clocks : phandles for the clocks, see the description of clock-names below. - The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock - is optional. If a single clock is specified but no clock-name, it is the - "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first. - -Optional properties: -- clock-names : Contains the names of the clocks: - "ssi_clk", for the core clock used to generate the external SPI clock. - "pclk", the interface clock, required for register access. If a clock domain - used to enable this clock then it should be named "pclk_clkdomain". -- cs-gpios : Specifies the gpio pins to be used for chipselects. -- num-cs : The number of chipselects. If omitted, this will default to 4. -- reg-io-width : The I/O register width (in bytes) implemented by this - device. Supported values are 2 or 4 (the default). - -Child nodes as per the generic SPI binding. - -Example: - - spi@fff00000 { - compatible = "snps,dw-apb-ssi"; - reg = <0xfff00000 0x1000>; - interrupts = <0 154 4>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&spi_m_clk>; - num-cs = <2>; - cs-gpios = <&gpio0 13 0>, - <&gpio0 14 0>; - }; - diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml new file mode 100644 index 000000000000..c62cbe79f00d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface + +maintainers: + - Mark Brown <broonie@kernel.org> + +allOf: + - $ref: "spi-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - mscc,ocelot-spi + - mscc,jaguar2-spi + then: + properties: + reg: + minItems: 2 + +properties: + compatible: + oneOf: + - description: Generic DW SPI Controller + enum: + - snps,dw-apb-ssi + - snps,dwc-ssi-1.01a + - description: Microsemi Ocelot/Jaguar2 SoC SPI Controller + items: + - enum: + - mscc,ocelot-spi + - mscc,jaguar2-spi + - const: snps,dw-apb-ssi + - description: Amazon Alpine SPI Controller + const: amazon,alpine-dw-apb-ssi + - description: Renesas RZ/N1 SPI Controller + items: + - const: renesas,rzn1-spi + - const: snps,dw-apb-ssi + - description: Intel Keem Bay SPI Controller + const: intel,keembay-ssi + + reg: + minItems: 1 + items: + - description: DW APB SSI controller memory mapped registers + - description: SPI MST region map + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: SPI Controller reference clock source + - description: APB interface clock source + + clock-names: + minItems: 1 + items: + - const: ssi_clk + - const: pclk + + resets: + maxItems: 1 + + reset-names: + const: spi + + reg-io-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: I/O register width (in bytes) implemented by this device + default: 4 + enum: [ 2, 4 ] + + num-cs: + default: 4 + minimum: 1 + maximum: 4 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + properties: + reg: + minimum: 0 + maximum: 3 + + spi-rx-bus-width: + const: 1 + + spi-tx-bus-width: + const: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + - clocks + +examples: + - | + spi@fff00000 { + compatible = "snps,dw-apb-ssi"; + reg = <0xfff00000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 154 4>; + clocks = <&spi_m_clk>; + num-cs = <2>; + cs-gpios = <&gpio0 13 0>, + <&gpio0 14 0>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml new file mode 100644 index 000000000000..c25409298bdf --- /dev/null +++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/socionext,uniphier-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SPI controller + +description: | + UniPhier SoCs have SCSSI which supports SPI single channel. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + - Keiji Hayashibara <hayashibara.keiji@socionext.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + const: socionext,uniphier-scssi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - "#address-cells" + - "#size-cells" + +examples: + - | + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + reg = <0x54006000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 39 4>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt deleted file mode 100644 index 7b63ed601990..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-dw.txt +++ /dev/null @@ -1,24 +0,0 @@ -Synopsys DesignWare SPI master - -Required properties: -- compatible: should be "snps,designware-spi" -- #address-cells: see spi-bus.txt -- #size-cells: see spi-bus.txt -- reg: address and length of the spi master registers -- interrupts: should contain one interrupt -- clocks: spi clock phandle -- num-cs: see spi-bus.txt - -Optional properties: -- cs-gpios: see spi-bus.txt - -Example: - -spi: spi@4020a000 { - compatible = "snps,designware-spi"; - interrupts = <11 1>; - reg = <0x4020a000 0x1000>; - clocks = <&pclk>; - num-cs = <2>; - cs-gpios = <&banka 0 0>; -}; diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt deleted file mode 100644 index 421722b93992..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ /dev/null @@ -1,73 +0,0 @@ -Device tree configuration for Renesas RSPI/QSPI driver - -Required properties: -- compatible : For Renesas Serial Peripheral Interface on legacy SH: - "renesas,rspi-<soctype>", "renesas,rspi" as fallback. - For Renesas Serial Peripheral Interface on RZ/A: - "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback. - For Quad Serial Peripheral Interface on R-Car Gen2 and - RZ/G1 devices: - "renesas,qspi-<soctype>", "renesas,qspi" as fallback. - Examples with soctypes are: - - "renesas,rspi-sh7757" (SH) - - "renesas,rspi-r7s72100" (RZ/A1H) - - "renesas,rspi-r7s9210" (RZ/A2) - - "renesas,qspi-r8a7743" (RZ/G1M) - - "renesas,qspi-r8a7744" (RZ/G1N) - - "renesas,qspi-r8a7745" (RZ/G1E) - - "renesas,qspi-r8a77470" (RZ/G1C) - - "renesas,qspi-r8a7790" (R-Car H2) - - "renesas,qspi-r8a7791" (R-Car M2-W) - - "renesas,qspi-r8a7792" (R-Car V2H) - - "renesas,qspi-r8a7793" (R-Car M2-N) - - "renesas,qspi-r8a7794" (R-Car E2) -- reg : Address start and address range size of the device -- interrupts : A list of interrupt-specifiers, one for each entry in - interrupt-names. - If interrupt-names is not present, an interrupt specifier - for a single muxed interrupt. -- interrupt-names : A list of interrupt names. Should contain (if present): - - "error" for SPEI, - - "rx" for SPRI, - - "tx" to SPTI, - - "mux" for a single muxed interrupt. -- num-cs : Number of chip selects. Some RSPI cores have more than 1. -- #address-cells : Must be <1> -- #size-cells : Must be <0> - -Optional properties: -- clocks : Must contain a reference to the functional clock. -- dmas : Must contain a list of two references to DMA specifiers, - one for transmission, and one for reception. -- dma-names : Must contain a list of two DMA names, "tx" and "rx". - -Pinctrl properties might be needed, too. See -Documentation/devicetree/bindings/pinctrl/renesas,*. - -Examples: - - spi0: spi@e800c800 { - compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; - reg = <0xe800c800 0x24>; - interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>, - <0 239 IRQ_TYPE_LEVEL_HIGH>, - <0 240 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", "rx", "tx"; - interrupt-parent = <&gic>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7791", "renesas,qspi"; - reg = <0 0xe6b10000 0 0x2c>; - interrupt-parent = <&gic>; - interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt deleted file mode 100644 index e1201573a29a..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt +++ /dev/null @@ -1,28 +0,0 @@ -Socionext UniPhier SPI controller driver - -UniPhier SoCs have SCSSI which supports SPI single channel. - -Required properties: - - compatible: should be "socionext,uniphier-scssi" - - reg: address and length of the spi master registers - - #address-cells: must be <1>, see spi-bus.txt - - #size-cells: must be <0>, see spi-bus.txt - - interrupts: a single interrupt specifier - - pinctrl-names: should be "default" - - pinctrl-0: pin control state for the default mode - - clocks: a phandle to the clock for the device - - resets: a phandle to the reset control for the device - -Example: - -spi0: spi@54006000 { - compatible = "socionext,uniphier-scssi"; - reg = <0x54006000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 39 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; -}; diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt index e65fde4a7388..47b184bce414 100644 --- a/Documentation/devicetree/bindings/spi/ti_qspi.txt +++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt @@ -29,7 +29,7 @@ modification to bootloader. Example: For am4372: -qspi: qspi@4b300000 { +qspi: qspi@47900000 { compatible = "ti,am4372-qspi"; reg = <0x47900000 0x100>, <0x30000000 0x4000000>; reg-names = "qspi_base", "qspi_mmap"; diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml index 1d6877875077..c2d2ee43ba67 100644 --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -56,7 +56,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/jz4740-cgu.h> - usb_phy: usb-phy@0 { + usb_phy: usb-phy { compatible = "usb-nop-xceiv"; #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index cb695aa3fba4..fbdd01756752 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -52,8 +52,8 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY -Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY +Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY +Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY Example device nodes: diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index 92d8631b9aa6..031452aa25bc 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -18,6 +18,7 @@ properties: - renesas,r8a774c0-usb3-peri # RZ/G2E - renesas,r8a7795-usb3-peri # R-Car H3 - renesas,r8a7796-usb3-peri # R-Car M3-W + - renesas,r8a77961-usb3-peri # R-Car M3-W+ - renesas,r8a77965-usb3-peri # R-Car M3-N - renesas,r8a77990-usb3-peri # R-Car E3 - const: renesas,rcar-gen3-usb3-peri diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index 469affa872d3..a7ae95598ccb 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -40,6 +40,7 @@ properties: - renesas,usbhs-r8a774c0 # RZ/G2E - renesas,usbhs-r8a7795 # R-Car H3 - renesas,usbhs-r8a7796 # R-Car M3-W + - renesas,usbhs-r8a77961 # R-Car M3-W+ - renesas,usbhs-r8a77965 # R-Car M3-N - renesas,usbhs-r8a77990 # R-Car E3 - renesas,usbhs-r8a77995 # R-Car D3 diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index c8c4b00ecb94..94520493233b 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY +Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY Example device nodes: diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 3f378951d624..dc025f126d71 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -16,7 +16,8 @@ Required properties: - "renesas,xhci-r8a7791" for r8a7791 SoC - "renesas,xhci-r8a7793" for r8a7793 SoC - "renesas,xhci-r8a7795" for r8a7795 SoC - - "renesas,xhci-r8a7796" for r8a7796 SoC + - "renesas,xhci-r8a7796" for r8a77960 SoC + - "renesas,xhci-r8a77961" for r8a77961 SoC - "renesas,xhci-r8a77965" for r8a77965 SoC - "renesas,xhci-r8a77990" for r8a77990 SoC - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index d3891386d671..d3277fe6640b 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -633,6 +633,8 @@ patternProperties: description: Microsoft Corporation "^mikroe,.*": description: MikroElektronika d.o.o. + "^mikrotik,.*": + description: MikroTik "^miniand,.*": description: Miniand Tech "^minix,.*": diff --git a/Documentation/filesystems/debugfs.rst b/Documentation/filesystems/debugfs.rst index db9ea0854040..6c032db235a5 100644 --- a/Documentation/filesystems/debugfs.rst +++ b/Documentation/filesystems/debugfs.rst @@ -79,8 +79,8 @@ created with any of:: struct dentry *parent, u8 *value); void debugfs_create_u16(const char *name, umode_t mode, struct dentry *parent, u16 *value); - struct dentry *debugfs_create_u32(const char *name, umode_t mode, - struct dentry *parent, u32 *value); + void debugfs_create_u32(const char *name, umode_t mode, + struct dentry *parent, u32 *value); void debugfs_create_u64(const char *name, umode_t mode, struct dentry *parent, u64 *value); diff --git a/Documentation/hwmon/amd_energy.rst b/Documentation/hwmon/amd_energy.rst new file mode 100644 index 000000000000..f8288edff664 --- /dev/null +++ b/Documentation/hwmon/amd_energy.rst @@ -0,0 +1,109 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver amd_energy +========================== + +Supported chips: + +* AMD Family 17h Processors + + Prefix: 'amd_energy' + + Addresses used: RAPL MSRs + + Datasheets: + + - Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors + + https://developer.amd.com/wp-content/resources/55570-B1_PUB.zip + + - Preliminary Processor Programming Reference (PPR) for AMD Family 17h Model 31h, Revision B0 Processors + + https://developer.amd.com/wp-content/resources/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip + +Author: Naveen Krishna Chatradhi <nchatrad@amd.com> + +Description +----------- + +The Energy driver exposes the energy counters that are +reported via the Running Average Power Limit (RAPL) +Model-specific Registers (MSRs) via the hardware monitor +(HWMON) sysfs interface. + +1. Power, Energy and Time Units + MSR_RAPL_POWER_UNIT/ C001_0299: + shared with all cores in the socket + +2. Energy consumed by each Core + MSR_CORE_ENERGY_STATUS/ C001_029A: + 32-bitRO, Accumulator, core-level power reporting + +3. Energy consumed by Socket + MSR_PACKAGE_ENERGY_STATUS/ C001_029B: + 32-bitRO, Accumulator, socket-level power reporting, + shared with all cores in socket + +These registers are updated every 1ms and cleared on +reset of the system. + +Note: If SMT is enabled, Linux enumerates all threads as cpus. +Since, the energy status registers are accessed at core level, +reading those registers from the sibling threads would result +in duplicate values. Hence, energy counter entries are not +populated for the siblings. + +Energy Caluclation +------------------ + +Energy information (in Joules) is based on the multiplier, +1/2^ESU; where ESU is an unsigned integer read from +MSR_RAPL_POWER_UNIT register. Default value is 10000b, +indicating energy status unit is 15.3 micro-Joules increment. + +Reported values are scaled as per the formula + +scaled value = ((1/2^ESU) * (Raw value) * 1000000UL) in uJoules + +Users calculate power for a given domain by calculating + dEnergy/dTime for that domain. + +Energy accumulation +-------------------------- + +Current, Socket energy status register is 32bit, assuming a 240W +2P system, the register would wrap around in + + 2^32*15.3 e-6/240 * 2 = 547.60833024 secs to wrap(~9 mins) + +The Core energy register may wrap around after several days. + +To improve the wrap around time, a kernel thread is implemented +to accumulate the socket energy counters and one core energy counter +per run to a respective 64-bit counter. The kernel thread starts +running during probe, wakes up every 100secs and stops running +when driver is removed. + +A socket and core energy read would return the current register +value added to the respective energy accumulator. + +Sysfs attributes +---------------- + +=============== ======== ===================================== +Attribute Label Description +=============== ======== ===================================== + +* For index N between [1] and [nr_cpus] + +=============== ======== ====================================== +energy[N]_input EcoreX Core Energy X = [0] to [nr_cpus - 1] + Measured input core energy +=============== ======== ====================================== + +* For N between [nr_cpus] and [nr_cpus + nr_socks] + +=============== ======== ====================================== +energy[N]_input EsocketX Socket Energy X = [0] to [nr_socks -1] + Measured input socket energy +=============== ======== ====================================== diff --git a/Documentation/hwmon/bt1-pvt.rst b/Documentation/hwmon/bt1-pvt.rst new file mode 100644 index 000000000000..cbb0c0613132 --- /dev/null +++ b/Documentation/hwmon/bt1-pvt.rst @@ -0,0 +1,117 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver bt1-pvt +===================== + +Supported chips: + + * Baikal-T1 PVT sensor (in SoC) + + Prefix: 'bt1-pvt' + + Addresses scanned: - + + Datasheet: Provided by BAIKAL ELECTRONICS upon request and under NDA + +Authors: + Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru> + Serge Semin <Sergey.Semin@baikalelectronics.ru> + +Description +----------- + +This driver implements support for the hardware monitoring capabilities of the +embedded into Baikal-T1 process, voltage and temperature sensors. PVT IP-core +consists of one temperature and four voltage sensors, which can be used to +monitor the chip internal environment like heating, supply voltage and +transistors performance. The driver can optionally provide the hwmon alarms +for each sensor the PVT controller supports. The alarms functionality is made +compile-time configurable due to the hardware interface implementation +peculiarity, which is connected with an ability to convert data from only one +sensor at a time. Additional limitation is that the controller performs the +thresholds checking synchronously with the data conversion procedure. Due to +these in order to have the hwmon alarms automatically detected the driver code +must switch from one sensor to another, read converted data and manually check +the threshold status bits. Depending on the measurements timeout settings +(update_interval sysfs node value) this design may cause additional burden on +the system performance. So in case if alarms are unnecessary in your system +design it's recommended to have them disabled to prevent the PVT IRQs being +periodically raised to get the data cache/alarms status up to date. By default +in alarm-less configuration the data conversion is performed by the driver +on demand when read operation is requested via corresponding _input-file. + +Temperature Monitoring +---------------------- + +Temperature is measured with 10-bit resolution and reported in millidegree +Celsius. The driver performs all the scaling by itself therefore reports true +temperatures that don't need any user-space adjustments. While the data +translation formulae isn't linear, which gives us non-linear discreteness, +it's close to one, but giving a bit better accuracy for higher temperatures. +The temperature input is mapped as follows (the last column indicates the input +ranges):: + + temp1: CPU embedded diode -48.38C - +147.438C + +In case if the alarms kernel config is enabled in the driver the temperature input +has associated min and max limits which trigger an alarm when crossed. + +Voltage Monitoring +------------------ + +The voltage inputs are also sampled with 10-bit resolution and reported in +millivolts. But in this case the data translation formulae is linear, which +provides a constant measurements discreteness. The data scaling is also +performed by the driver, so returning true millivolts. The voltage inputs are +mapped as follows (the last column indicates the input ranges):: + + in0: VDD (processor core) 0.62V - 1.168V + in1: Low-Vt (low voltage threshold) 0.62V - 1.168V + in2: High-Vt (high voltage threshold) 0.62V - 1.168V + in3: Standard-Vt (standard voltage threshold) 0.62V - 1.168V + +In case if the alarms config is enabled in the driver the voltage inputs +have associated min and max limits which trigger an alarm when crossed. + +Sysfs Attributes +---------------- + +Following is a list of all sysfs attributes that the driver provides, their +permissions and a short description: + +=============================== ======= ======================================= +Name Perm Description +=============================== ======= ======================================= +update_interval RW Measurements update interval per + sensor. +temp1_type RO Sensor type (always 1 as CPU embedded + diode). +temp1_label RO CPU Core Temperature sensor. +temp1_input RO Measured temperature in millidegree + Celsius. +temp1_min RW Low limit for temp input. +temp1_max RW High limit for temp input. +temp1_min_alarm RO Temperature input alarm. Returns 1 if + temperature input went below min limit, + 0 otherwise. +temp1_max_alarm RO Temperature input alarm. Returns 1 if + temperature input went above max limit, + 0 otherwise. +temp1_offset RW Temperature offset in millidegree + Celsius which is added to the + temperature reading by the chip. It can + be used to manually adjust the + temperature measurements within 7.130 + degrees Celsius. +in[0-3]_label RO CPU Voltage sensor (either core or + low/high/standard thresholds). +in[0-3]_input RO Measured voltage in millivolts. +in[0-3]_min RW Low limit for voltage input. +in[0-3]_max RW High limit for voltage input. +in[0-3]_min_alarm RO Voltage input alarm. Returns 1 if + voltage input went below min limit, + 0 otherwise. +in[0-3]_max_alarm RO Voltage input alarm. Returns 1 if + voltage input went above max limit, + 0 otherwise. +=============================== ======= ======================================= diff --git a/Documentation/hwmon/gsc-hwmon.rst b/Documentation/hwmon/gsc-hwmon.rst new file mode 100644 index 000000000000..ffac392a7129 --- /dev/null +++ b/Documentation/hwmon/gsc-hwmon.rst @@ -0,0 +1,53 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver gsc-hwmon +======================= + +Supported chips: Gateworks GSC +Datasheet: http://trac.gateworks.com/wiki/gsc +Author: Tim Harvey <tharvey@gateworks.com> + +Description: +------------ + +This driver supports hardware monitoring for the temperature sensor, +various ADC's connected to the GSC, and optional FAN controller available +on some boards. + + +Voltage Monitoring +------------------ + +The voltage inputs are scaled either internally or by the driver depending +on the GSC version and firmware. The values returned by the driver do not need +further scaling. The voltage input labels provide the voltage rail name: + +inX_input Measured voltage (mV). +inX_label Name of voltage rail. + + +Temperature Monitoring +---------------------- + +Temperatures are measured with 12-bit or 10-bit resolution and are scaled +either internally or by the driver depending on the GSC version and firmware. +The values returned by the driver reflect millidegree Celcius: + +tempX_input Measured temperature. +tempX_label Name of temperature input. + + +PWM Output Control +------------------ + +The GSC features 1 PWM output that operates in automatic mode where the +PWM value will be scalled depending on 6 temperature boundaries. +The tempeature boundaries are read-write and in millidegree Celcius and the +read-only PWM values range from 0 (off) to 255 (full speed). +Fan speed will be set to minimum (off) when the temperature sensor reads +less than pwm1_auto_point1_temp and maximum when the temperature sensor +equals or exceeds pwm1_auto_point6_temp. + +pwm1_auto_point[1-6]_pwm PWM value. +pwm1_auto_point[1-6]_temp Temperature boundary. + diff --git a/Documentation/hwmon/ina2xx.rst b/Documentation/hwmon/ina2xx.rst index 94b9a260c518..ed81f5416331 100644 --- a/Documentation/hwmon/ina2xx.rst +++ b/Documentation/hwmon/ina2xx.rst @@ -99,6 +99,25 @@ Sysfs entries for ina226, ina230 and ina231 only ------------------------------------------------ ======================= ==================================================== +in0_lcrit Critical low shunt voltage +in0_crit Critical high shunt voltage +in0_lcrit_alarm Shunt voltage critical low alarm +in0_crit_alarm Shunt voltage critical high alarm +in1_lcrit Critical low bus voltage +in1_crit Critical high bus voltage +in1_lcrit_alarm Bus voltage critical low alarm +in1_crit_alarm Bus voltage critical high alarm +power1_crit Critical high power +power1_crit_alarm Power critical high alarm update_interval data conversion time; affects number of samples used to average results for shunt and bus voltages. ======================= ==================================================== + +.. note:: + + - Configure `shunt_resistor` before configure `power1_crit`, because power + value is calculated based on `shunt_resistor` set. + - Because of the underlying register implementation, only one `*crit` setting + and its `alarm` can be active. Writing to one `*crit` setting clears other + `*crit` settings and alarms. Writing 0 to any `*crit` setting clears all + `*crit` settings and alarms. diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 8ef62fd39787..005bf9e124bb 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -39,10 +39,12 @@ Hardware Monitoring Kernel Drivers adt7470 adt7475 amc6821 + amd_energy asb100 asc7621 aspeed-pwm-tacho bel-pfe + bt1-pvt coretemp da9052 da9055 @@ -60,6 +62,7 @@ Hardware Monitoring Kernel Drivers ftsteutates g760a g762 + gsc-hwmon gl518sm hih6130 ibmaem @@ -106,6 +109,7 @@ Hardware Monitoring Kernel Drivers max16064 max16065 max1619 + max16601 max1668 max197 max20730 diff --git a/Documentation/hwmon/isl68137.rst b/Documentation/hwmon/isl68137.rst index cc4b61447b63..0e71b22047f8 100644 --- a/Documentation/hwmon/isl68137.rst +++ b/Documentation/hwmon/isl68137.rst @@ -16,7 +16,7 @@ Supported chips: * Renesas ISL68220 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68220' Addresses scanned: - @@ -26,7 +26,7 @@ Supported chips: * Renesas ISL68221 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68221' Addresses scanned: - @@ -36,7 +36,7 @@ Supported chips: * Renesas ISL68222 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68222' Addresses scanned: - @@ -46,7 +46,7 @@ Supported chips: * Renesas ISL68223 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68223' Addresses scanned: - @@ -56,7 +56,7 @@ Supported chips: * Renesas ISL68224 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68224' Addresses scanned: - @@ -66,7 +66,7 @@ Supported chips: * Renesas ISL68225 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68225' Addresses scanned: - @@ -76,7 +76,7 @@ Supported chips: * Renesas ISL68226 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68226' Addresses scanned: - @@ -86,7 +86,7 @@ Supported chips: * Renesas ISL68227 - Prefix: 'raa_dmpvr2_1rail' + Prefix: 'isl68227' Addresses scanned: - @@ -96,7 +96,7 @@ Supported chips: * Renesas ISL68229 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68229' Addresses scanned: - @@ -106,7 +106,7 @@ Supported chips: * Renesas ISL68233 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl68233' Addresses scanned: - @@ -116,7 +116,7 @@ Supported chips: * Renesas ISL68239 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl68239' Addresses scanned: - @@ -126,7 +126,7 @@ Supported chips: * Renesas ISL69222 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69222' Addresses scanned: - @@ -136,7 +136,7 @@ Supported chips: * Renesas ISL69223 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69223' Addresses scanned: - @@ -146,7 +146,7 @@ Supported chips: * Renesas ISL69224 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69224' Addresses scanned: - @@ -156,7 +156,7 @@ Supported chips: * Renesas ISL69225 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69225' Addresses scanned: - @@ -166,7 +166,7 @@ Supported chips: * Renesas ISL69227 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69227' Addresses scanned: - @@ -176,7 +176,7 @@ Supported chips: * Renesas ISL69228 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69228' Addresses scanned: - @@ -186,7 +186,7 @@ Supported chips: * Renesas ISL69234 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69234' Addresses scanned: - @@ -196,7 +196,7 @@ Supported chips: * Renesas ISL69236 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69236' Addresses scanned: - @@ -206,7 +206,7 @@ Supported chips: * Renesas ISL69239 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69239' Addresses scanned: - @@ -216,7 +216,7 @@ Supported chips: * Renesas ISL69242 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69242' Addresses scanned: - @@ -226,7 +226,7 @@ Supported chips: * Renesas ISL69243 - Prefix: 'raa_dmpvr2_1rail' + Prefix: 'isl69243' Addresses scanned: - @@ -236,7 +236,7 @@ Supported chips: * Renesas ISL69247 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69247' Addresses scanned: - @@ -246,7 +246,7 @@ Supported chips: * Renesas ISL69248 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69248' Addresses scanned: - @@ -256,7 +256,7 @@ Supported chips: * Renesas ISL69254 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69254' Addresses scanned: - @@ -266,7 +266,7 @@ Supported chips: * Renesas ISL69255 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69255' Addresses scanned: - @@ -276,7 +276,7 @@ Supported chips: * Renesas ISL69256 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69256' Addresses scanned: - @@ -286,7 +286,7 @@ Supported chips: * Renesas ISL69259 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69259' Addresses scanned: - @@ -296,7 +296,7 @@ Supported chips: * Renesas ISL69260 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69260' Addresses scanned: - @@ -306,7 +306,7 @@ Supported chips: * Renesas ISL69268 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69268' Addresses scanned: - @@ -316,7 +316,7 @@ Supported chips: * Renesas ISL69269 - Prefix: 'raa_dmpvr2_3rail' + Prefix: 'isl69269' Addresses scanned: - @@ -326,7 +326,7 @@ Supported chips: * Renesas ISL69298 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'isl69298' Addresses scanned: - @@ -336,7 +336,7 @@ Supported chips: * Renesas RAA228000 - Prefix: 'raa_dmpvr2_hv' + Prefix: 'raa228000' Addresses scanned: - @@ -346,7 +346,7 @@ Supported chips: * Renesas RAA228004 - Prefix: 'raa_dmpvr2_hv' + Prefix: 'raa228004' Addresses scanned: - @@ -356,7 +356,7 @@ Supported chips: * Renesas RAA228006 - Prefix: 'raa_dmpvr2_hv' + Prefix: 'raa228006' Addresses scanned: - @@ -366,7 +366,7 @@ Supported chips: * Renesas RAA228228 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'raa228228' Addresses scanned: - @@ -376,7 +376,7 @@ Supported chips: * Renesas RAA229001 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'raa229001' Addresses scanned: - @@ -386,7 +386,7 @@ Supported chips: * Renesas RAA229004 - Prefix: 'raa_dmpvr2_2rail' + Prefix: 'raa229004' Addresses scanned: - diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst index 953315987c06..78dfc01b47a2 100644 --- a/Documentation/hwmon/lm90.rst +++ b/Documentation/hwmon/lm90.rst @@ -123,6 +123,18 @@ Supported chips: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + * Maxim MAX6654 + + Prefix: 'max6654' + + Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, + + 0x4c, 0x4d and 0x4e + + Datasheet: Publicly available at the Maxim website + + https://www.maximintegrated.com/en/products/sensors/MAX6654.html + * Maxim MAX6657 Prefix: 'max6657' @@ -301,6 +313,13 @@ ADT7461, ADT7461A, NCT1008: * Extended temperature range (breaks compatibility) * Lower resolution for remote temperature +MAX6654: + * Better local resolution + * Selectable address + * Remote sensor type selection + * Extended temperature range + * Extended resolution only available when conversion rate <= 1 Hz + MAX6657 and MAX6658: * Better local resolution * Remote sensor type selection @@ -336,8 +355,8 @@ SA56004X: All temperature values are given in degrees Celsius. Resolution is 1.0 degree for the local temperature, 0.125 degree for the remote -temperature, except for the MAX6657, MAX6658 and MAX6659 which have a -resolution of 0.125 degree for both temperatures. +temperature, except for the MAX6654, MAX6657, MAX6658 and MAX6659 which have +a resolution of 0.125 degree for both temperatures. Each sensor has its own high and low limits, plus a critical limit. Additionally, there is a relative hysteresis value common to both critical diff --git a/Documentation/hwmon/max16601.rst b/Documentation/hwmon/max16601.rst new file mode 100644 index 000000000000..346e74674c51 --- /dev/null +++ b/Documentation/hwmon/max16601.rst @@ -0,0 +1,159 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver max16601 +====================== + +Supported chips: + + * Maxim MAX16601 + + Prefix: 'max16601' + + Addresses scanned: - + + Datasheet: Not published + +Author: Guenter Roeck <linux@roeck-us.net> + + +Description +----------- + +This driver supports the MAX16601 VR13.HC Dual-Output Voltage Regulator +Chipset. + +The driver is a client driver to the core PMBus driver. +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. + +======================= ======================================================= +in1_label "vin1" +in1_input VCORE input voltage. +in1_alarm Input voltage alarm. + +in2_label "vout1" +in2_input VCORE output voltage. +in2_alarm Output voltage alarm. + +curr1_label "iin1" +curr1_input VCORE input current, derived from duty cycle and output + current. +curr1_max Maximum input current. +curr1_max_alarm Current high alarm. + +curr2_label "iin1.0" +curr2_input VCORE phase 0 input current. + +curr3_label "iin1.1" +curr3_input VCORE phase 1 input current. + +curr4_label "iin1.2" +curr4_input VCORE phase 2 input current. + +curr5_label "iin1.3" +curr5_input VCORE phase 3 input current. + +curr6_label "iin1.4" +curr6_input VCORE phase 4 input current. + +curr7_label "iin1.5" +curr7_input VCORE phase 5 input current. + +curr8_label "iin1.6" +curr8_input VCORE phase 6 input current. + +curr9_label "iin1.7" +curr9_input VCORE phase 7 input current. + +curr10_label "iin2" +curr10_input VCORE input current, derived from sensor element. + +curr11_label "iin3" +curr11_input VSA input current. + +curr12_label "iout1" +curr12_input VCORE output current. +curr12_crit Critical output current. +curr12_crit_alarm Output current critical alarm. +curr12_max Maximum output current. +curr12_max_alarm Output current high alarm. + +curr13_label "iout1.0" +curr13_input VCORE phase 0 output current. + +curr14_label "iout1.1" +curr14_input VCORE phase 1 output current. + +curr15_label "iout1.2" +curr15_input VCORE phase 2 output current. + +curr16_label "iout1.3" +curr16_input VCORE phase 3 output current. + +curr17_label "iout1.4" +curr17_input VCORE phase 4 output current. + +curr18_label "iout1.5" +curr18_input VCORE phase 5 output current. + +curr19_label "iout1.6" +curr19_input VCORE phase 6 output current. + +curr20_label "iout1.7" +curr20_input VCORE phase 7 output current. + +curr21_label "iout3" +curr21_input VSA output current. +curr21_highest Historical maximum VSA output current. +curr21_reset_history Write any value to reset curr21_highest. +curr21_crit Critical output current. +curr21_crit_alarm Output current critical alarm. +curr21_max Maximum output current. +curr21_max_alarm Output current high alarm. + +power1_label "pin1" +power1_input Input power, derived from duty cycle and output current. +power1_alarm Input power alarm. + +power2_label "pin2" +power2_input Input power, derived from input current sensor. + +power3_label "pout" +power3_input Output power. + +temp1_input VCORE temperature. +temp1_crit Critical high temperature. +temp1_crit_alarm Chip temperature critical high alarm. +temp1_max Maximum temperature. +temp1_max_alarm Chip temperature high alarm. + +temp2_input TSENSE_0 temperature +temp3_input TSENSE_1 temperature +temp4_input TSENSE_2 temperature +temp5_input TSENSE_3 temperature + +temp6_input VSA temperature. +temp6_crit Critical high temperature. +temp6_crit_alarm Chip temperature critical high alarm. +temp6_max Maximum temperature. +temp6_max_alarm Chip temperature high alarm. +======================= ======================================================= diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index 04d5c01a2e99..b80257a03830 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -1241,7 +1241,8 @@ When kbuild executes, the following steps are followed (roughly): will be displayed with "make KBUILD_VERBOSE=0". ---- 6.9 Preprocessing linker scripts +6.9 Preprocessing linker scripts +-------------------------------- When the vmlinux image is built, the linker script arch/$(ARCH)/kernel/vmlinux.lds is used. diff --git a/Documentation/networking/devlink/devlink-trap.rst b/Documentation/networking/devlink/devlink-trap.rst index a09971c2115c..fe089acb7783 100644 --- a/Documentation/networking/devlink/devlink-trap.rst +++ b/Documentation/networking/devlink/devlink-trap.rst @@ -257,6 +257,8 @@ drivers: * :doc:`netdevsim` * :doc:`mlxsw` +.. _Generic-Packet-Trap-Groups: + Generic Packet Trap Groups ========================== diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst index 5b58fc4e1268..4574352d6ff4 100644 --- a/Documentation/networking/devlink/ice.rst +++ b/Documentation/networking/devlink/ice.rst @@ -61,8 +61,8 @@ The ``ice`` driver reports the following versions - running - ICE OS Default Package - The name of the DDP package that is active in the device. The DDP - package is loaded by the driver during initialization. Each varation - of DDP package shall have a unique name. + package is loaded by the driver during initialization. Each + variation of the DDP package has a unique name. * - ``fw.app`` - running - 1.3.1.0 diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 50133d9761c9..6538ede29661 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -22,6 +22,7 @@ Contents: z8530book msg_zerocopy failover + net_dim net_failover phy sfp-phylink diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ee961d322d93..9375324aa8e1 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -812,7 +812,7 @@ tcp_limit_output_bytes - INTEGER tcp_challenge_ack_limit - INTEGER Limits number of Challenge ACK sent per second, as recommended in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks) - Default: 100 + Default: 1000 tcp_rx_skb_cache - BOOLEAN Controls a per TCP socket cache of one skb, that might help @@ -983,6 +983,13 @@ ip_early_demux - BOOLEAN reduces overall throughput, in such case you should disable it. Default: 1 +ping_group_range - 2 INTEGERS + Restrict ICMP_PROTO datagram sockets to users in the group range. + The default is "1 0", meaning, that nobody (not even root) may + create ping sockets. Setting it to "100 100" would grant permissions + to the single group. "0 4294967295" would enable it for the world, "100 + 4294967295" would enable it for the users, but not daemons. + tcp_early_demux - BOOLEAN Enable early demux for established TCP sockets. Default: 1 diff --git a/Documentation/networking/net_dim.txt b/Documentation/networking/net_dim.rst index 9bdb7d5a3ba3..3bed9fd95336 100644 --- a/Documentation/networking/net_dim.txt +++ b/Documentation/networking/net_dim.rst @@ -1,28 +1,20 @@ +====================================================== Net DIM - Generic Network Dynamic Interrupt Moderation ====================================================== -Author: - Tal Gilboa <talgi@mellanox.com> - - -Contents -========= +:Author: Tal Gilboa <talgi@mellanox.com> -- Assumptions -- Introduction -- The Net DIM Algorithm -- Registering a Network Device to DIM -- Example +.. contents:: :depth: 2 -Part 0: Assumptions -====================== +Assumptions +=========== This document assumes the reader has basic knowledge in network drivers and in general interrupt moderation. -Part I: Introduction -====================== +Introduction +============ Dynamic Interrupt Moderation (DIM) (in networking) refers to changing the interrupt moderation configuration of a channel in order to optimize packet @@ -41,14 +33,15 @@ number of wanted packets per event. The Net DIM algorithm ascribes importance to increase bandwidth over reducing interrupt rate. -Part II: The Net DIM Algorithm -=============================== +Net DIM Algorithm +================= Each iteration of the Net DIM algorithm follows these steps: -1. Calculates new data sample. -2. Compares it to previous sample. -3. Makes a decision - suggests interrupt moderation configuration fields. -4. Applies a schedule work function, which applies suggested configuration. + +#. Calculates new data sample. +#. Compares it to previous sample. +#. Makes a decision - suggests interrupt moderation configuration fields. +#. Applies a schedule work function, which applies suggested configuration. The first two steps are straightforward, both the new and the previous data are supplied by the driver registered to Net DIM. The previous data is the new data @@ -89,19 +82,21 @@ manoeuvre as it may provide partial data or ignore the algorithm suggestion under some conditions. -Part III: Registering a Network Device to DIM -============================================== +Registering a Network Device to DIM +=================================== -Net DIM API exposes the main function net_dim(struct dim *dim, -struct dim_sample end_sample). This function is the entry point to the Net +Net DIM API exposes the main function net_dim(). +This function is the entry point to the Net DIM algorithm and has to be called every time the driver would like to check if it should change interrupt moderation parameters. The driver should provide two -data structures: struct dim and struct dim_sample. Struct dim +data structures: :c:type:`struct dim <dim>` and +:c:type:`struct dim_sample <dim_sample>`. :c:type:`struct dim <dim>` describes the state of DIM for a specific object (RX queue, TX queue, other queues, etc.). This includes the current selected profile, previous data samples, the callback function provided by the driver and more. -Struct dim_sample describes a data sample, which will be compared to the -data sample stored in struct dim in order to decide on the algorithm's next +:c:type:`struct dim_sample <dim_sample>` describes a data sample, +which will be compared to the data sample stored in :c:type:`struct dim <dim>` +in order to decide on the algorithm's next step. The sample should include bytes, packets and interrupts, measured by the driver. @@ -110,9 +105,10 @@ main net_dim() function. The recommended method is to call net_dim() on each interrupt. Since Net DIM has a built-in moderation and it might decide to skip iterations under certain conditions, there is no need to moderate the net_dim() calls as well. As mentioned above, the driver needs to provide an object of type -struct dim to the net_dim() function call. It is advised for each entity -using Net DIM to hold a struct dim as part of its data structure and use it -as the main Net DIM API object. The struct dim_sample should hold the latest +:c:type:`struct dim <dim>` to the net_dim() function call. It is advised for +each entity using Net DIM to hold a :c:type:`struct dim <dim>` as part of its +data structure and use it as the main Net DIM API object. +The :c:type:`struct dim_sample <dim_sample>` should hold the latest bytes, packets and interrupts count. No need to perform any calculations, just include the raw data. @@ -124,19 +120,19 @@ the data flow. After the work is done, Net DIM algorithm needs to be set to the proper state in order to move to the next iteration. -Part IV: Example -================= +Example +======= The following code demonstrates how to register a driver to Net DIM. The actual usage is not complete but it should make the outline of the usage clear. -my_driver.c: +.. code-block:: c -#include <linux/dim.h> + #include <linux/dim.h> -/* Callback for net DIM to schedule on a decision to change moderation */ -void my_driver_do_dim_work(struct work_struct *work) -{ + /* Callback for net DIM to schedule on a decision to change moderation */ + void my_driver_do_dim_work(struct work_struct *work) + { /* Get struct dim from struct work_struct */ struct dim *dim = container_of(work, struct dim, work); @@ -145,11 +141,11 @@ void my_driver_do_dim_work(struct work_struct *work) /* Signal net DIM work is done and it should move to next iteration */ dim->state = DIM_START_MEASURE; -} + } -/* My driver's interrupt handler */ -int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...) -{ + /* My driver's interrupt handler */ + int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...) + { ... /* A struct to hold current measured data */ struct dim_sample dim_sample; @@ -162,13 +158,19 @@ int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...) /* Call net DIM */ net_dim(&my_entity->dim, dim_sample); ... -} + } -/* My entity's initialization function (my_entity was already allocated) */ -int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...) -{ + /* My entity's initialization function (my_entity was already allocated) */ + int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...) + { ... /* Initiate struct work_struct with my driver's callback function */ INIT_WORK(&my_entity->dim.work, my_driver_do_dim_work); ... -} + } + +Dynamic Interrupt Moderation (DIM) library API +============================================== + +.. kernel-doc:: include/linux/dim.h + :internal: diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index acb2f1b36350..17a8e584f15f 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -84,15 +84,20 @@ Get a decent editor and don't leave whitespace at the end of lines. Coding style is all about readability and maintainability using commonly available tools. -The limit on the length of lines is 80 columns and this is a strongly -preferred limit. - -Statements longer than 80 columns will be broken into sensible chunks, unless -exceeding 80 columns significantly increases readability and does not hide -information. Descendants are always substantially shorter than the parent and -are placed substantially to the right. The same applies to function headers -with a long argument list. However, never break user-visible strings such as -printk messages, because that breaks the ability to grep for them. +The preferred limit on the length of a single line is 80 columns. + +Statements longer than 80 columns should be broken into sensible chunks, +unless exceeding 80 columns significantly increases readability and does +not hide information. + +Descendants are always substantially shorter than the parent and are +are placed substantially to the right. A very commonly used style +is to align descendants to a function open parenthesis. + +These same rules are applied to function headers with a long argument list. + +However, never break user-visible strings such as printk messages because +that breaks the ability to grep for them. 3) Placing Braces and Spaces diff --git a/Documentation/security/siphash.rst b/Documentation/security/siphash.rst index 4eba68cdf0a1..bd9363025fcb 100644 --- a/Documentation/security/siphash.rst +++ b/Documentation/security/siphash.rst @@ -7,7 +7,7 @@ SipHash - a short input PRF SipHash is a cryptographically secure PRF -- a keyed hash function -- that performs very well for short inputs, hence the name. It was designed by cryptographers Daniel J. Bernstein and Jean-Philippe Aumasson. It is intended -as a replacement for some uses of: `jhash`, `md5_transform`, `sha_transform`, +as a replacement for some uses of: `jhash`, `md5_transform`, `sha1_transform`, and so forth. SipHash takes a secret key filled with randomly generated numbers and either diff --git a/Documentation/usb/raw-gadget.rst b/Documentation/usb/raw-gadget.rst index 9e78cb858f86..68d879a8009e 100644 --- a/Documentation/usb/raw-gadget.rst +++ b/Documentation/usb/raw-gadget.rst @@ -27,9 +27,8 @@ differences are: 3. Raw Gadget provides a way to select a UDC device/driver to bind to, while GadgetFS currently binds to the first available UDC. -4. Raw Gadget uses predictable endpoint names (handles) across different - UDCs (as long as UDCs have enough endpoints of each required transfer - type). +4. Raw Gadget explicitly exposes information about endpoints addresses and + capabilities allowing a user to write UDC-agnostic gadgets. 5. Raw Gadget has ioctl-based interface instead of a filesystem-based one. @@ -50,12 +49,36 @@ The typical usage of Raw Gadget looks like: Raw Gadget and react to those depending on what kind of USB device needs to be emulated. +Note, that some UDC drivers have fixed addresses assigned to endpoints, and +therefore arbitrary endpoint addresses can't be used in the descriptors. +Nevertheles, Raw Gadget provides a UDC-agnostic way to write USB gadgets. +Once a USB_RAW_EVENT_CONNECT event is received via USB_RAW_IOCTL_EVENT_FETCH, +the USB_RAW_IOCTL_EPS_INFO ioctl can be used to find out information about +endpoints that the UDC driver has. Based on that information, the user must +chose UDC endpoints that will be used for the gadget being emulated, and +properly assign addresses in endpoint descriptors. + +You can find usage examples (along with a test suite) here: + +https://github.com/xairy/raw-gadget + +Internal details +~~~~~~~~~~~~~~~~ + +Currently every endpoint read/write ioctl submits a USB request and waits until +its completion. This is the desired mode for coverage-guided fuzzing (as we'd +like all USB request processing happen during the lifetime of a syscall), +and must be kept in the implementation. (This might be slow for real world +applications, thus the O_NONBLOCK improvement suggestion below.) + Potential future improvements ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- Implement ioctl's for setting/clearing halt status on endpoints. - -- Reporting more events (suspend, resume, etc.) through - USB_RAW_IOCTL_EVENT_FETCH. +- Report more events (suspend, resume, etc.) through USB_RAW_IOCTL_EVENT_FETCH. - Support O_NONBLOCK I/O. + +- Support USB 3 features (accept SS endpoint companion descriptor when + enabling endpoints; allow providing stream_id for bulk transfers). + +- Support ISO transfer features (expose frame_number for completed requests). diff --git a/Documentation/virt/kvm/index.rst b/Documentation/virt/kvm/index.rst index dcc252634cf9..b6833c7bb474 100644 --- a/Documentation/virt/kvm/index.rst +++ b/Documentation/virt/kvm/index.rst @@ -28,3 +28,5 @@ KVM arm/index devices/index + + running-nested-guests diff --git a/Documentation/virt/kvm/running-nested-guests.rst b/Documentation/virt/kvm/running-nested-guests.rst new file mode 100644 index 000000000000..d0a1fc754c84 --- /dev/null +++ b/Documentation/virt/kvm/running-nested-guests.rst @@ -0,0 +1,276 @@ +============================== +Running nested guests with KVM +============================== + +A nested guest is the ability to run a guest inside another guest (it +can be KVM-based or a different hypervisor). The straightforward +example is a KVM guest that in turn runs on a KVM guest (the rest of +this document is built on this example):: + + .----------------. .----------------. + | | | | + | L2 | | L2 | + | (Nested Guest) | | (Nested Guest) | + | | | | + |----------------'--'----------------| + | | + | L1 (Guest Hypervisor) | + | KVM (/dev/kvm) | + | | + .------------------------------------------------------. + | L0 (Host Hypervisor) | + | KVM (/dev/kvm) | + |------------------------------------------------------| + | Hardware (with virtualization extensions) | + '------------------------------------------------------' + +Terminology: + +- L0 – level-0; the bare metal host, running KVM + +- L1 – level-1 guest; a VM running on L0; also called the "guest + hypervisor", as it itself is capable of running KVM. + +- L2 – level-2 guest; a VM running on L1, this is the "nested guest" + +.. note:: The above diagram is modelled after the x86 architecture; + s390x, ppc64 and other architectures are likely to have + a different design for nesting. + + For example, s390x always has an LPAR (LogicalPARtition) + hypervisor running on bare metal, adding another layer and + resulting in at least four levels in a nested setup — L0 (bare + metal, running the LPAR hypervisor), L1 (host hypervisor), L2 + (guest hypervisor), L3 (nested guest). + + This document will stick with the three-level terminology (L0, + L1, and L2) for all architectures; and will largely focus on + x86. + + +Use Cases +--------- + +There are several scenarios where nested KVM can be useful, to name a +few: + +- As a developer, you want to test your software on different operating + systems (OSes). Instead of renting multiple VMs from a Cloud + Provider, using nested KVM lets you rent a large enough "guest + hypervisor" (level-1 guest). This in turn allows you to create + multiple nested guests (level-2 guests), running different OSes, on + which you can develop and test your software. + +- Live migration of "guest hypervisors" and their nested guests, for + load balancing, disaster recovery, etc. + +- VM image creation tools (e.g. ``virt-install``, etc) often run + their own VM, and users expect these to work inside a VM. + +- Some OSes use virtualization internally for security (e.g. to let + applications run safely in isolation). + + +Enabling "nested" (x86) +----------------------- + +From Linux kernel v4.19 onwards, the ``nested`` KVM parameter is enabled +by default for Intel and AMD. (Though your Linux distribution might +override this default.) + +In case you are running a Linux kernel older than v4.19, to enable +nesting, set the ``nested`` KVM module parameter to ``Y`` or ``1``. To +persist this setting across reboots, you can add it in a config file, as +shown below: + +1. On the bare metal host (L0), list the kernel modules and ensure that + the KVM modules:: + + $ lsmod | grep -i kvm + kvm_intel 133627 0 + kvm 435079 1 kvm_intel + +2. Show information for ``kvm_intel`` module:: + + $ modinfo kvm_intel | grep -i nested + parm: nested:bool + +3. For the nested KVM configuration to persist across reboots, place the + below in ``/etc/modprobed/kvm_intel.conf`` (create the file if it + doesn't exist):: + + $ cat /etc/modprobe.d/kvm_intel.conf + options kvm-intel nested=y + +4. Unload and re-load the KVM Intel module:: + + $ sudo rmmod kvm-intel + $ sudo modprobe kvm-intel + +5. Verify if the ``nested`` parameter for KVM is enabled:: + + $ cat /sys/module/kvm_intel/parameters/nested + Y + +For AMD hosts, the process is the same as above, except that the module +name is ``kvm-amd``. + + +Additional nested-related kernel parameters (x86) +------------------------------------------------- + +If your hardware is sufficiently advanced (Intel Haswell processor or +higher, which has newer hardware virt extensions), the following +additional features will also be enabled by default: "Shadow VMCS +(Virtual Machine Control Structure)", APIC Virtualization on your bare +metal host (L0). Parameters for Intel hosts:: + + $ cat /sys/module/kvm_intel/parameters/enable_shadow_vmcs + Y + + $ cat /sys/module/kvm_intel/parameters/enable_apicv + Y + + $ cat /sys/module/kvm_intel/parameters/ept + Y + +.. note:: If you suspect your L2 (i.e. nested guest) is running slower, + ensure the above are enabled (particularly + ``enable_shadow_vmcs`` and ``ept``). + + +Starting a nested guest (x86) +----------------------------- + +Once your bare metal host (L0) is configured for nesting, you should be +able to start an L1 guest with:: + + $ qemu-kvm -cpu host [...] + +The above will pass through the host CPU's capabilities as-is to the +gues); or for better live migration compatibility, use a named CPU +model supported by QEMU. e.g.:: + + $ qemu-kvm -cpu Haswell-noTSX-IBRS,vmx=on + +then the guest hypervisor will subsequently be capable of running a +nested guest with accelerated KVM. + + +Enabling "nested" (s390x) +------------------------- + +1. On the host hypervisor (L0), enable the ``nested`` parameter on + s390x:: + + $ rmmod kvm + $ modprobe kvm nested=1 + +.. note:: On s390x, the kernel parameter ``hpage`` is mutually exclusive + with the ``nested`` paramter — i.e. to be able to enable + ``nested``, the ``hpage`` parameter *must* be disabled. + +2. The guest hypervisor (L1) must be provided with the ``sie`` CPU + feature — with QEMU, this can be done by using "host passthrough" + (via the command-line ``-cpu host``). + +3. Now the KVM module can be loaded in the L1 (guest hypervisor):: + + $ modprobe kvm + + +Live migration with nested KVM +------------------------------ + +Migrating an L1 guest, with a *live* nested guest in it, to another +bare metal host, works as of Linux kernel 5.3 and QEMU 4.2.0 for +Intel x86 systems, and even on older versions for s390x. + +On AMD systems, once an L1 guest has started an L2 guest, the L1 guest +should no longer be migrated or saved (refer to QEMU documentation on +"savevm"/"loadvm") until the L2 guest shuts down. Attempting to migrate +or save-and-load an L1 guest while an L2 guest is running will result in +undefined behavior. You might see a ``kernel BUG!`` entry in ``dmesg``, a +kernel 'oops', or an outright kernel panic. Such a migrated or loaded L1 +guest can no longer be considered stable or secure, and must be restarted. +Migrating an L1 guest merely configured to support nesting, while not +actually running L2 guests, is expected to function normally even on AMD +systems but may fail once guests are started. + +Migrating an L2 guest is always expected to succeed, so all the following +scenarios should work even on AMD systems: + +- Migrating a nested guest (L2) to another L1 guest on the *same* bare + metal host. + +- Migrating a nested guest (L2) to another L1 guest on a *different* + bare metal host. + +- Migrating a nested guest (L2) to a bare metal host. + +Reporting bugs from nested setups +----------------------------------- + +Debugging "nested" problems can involve sifting through log files across +L0, L1 and L2; this can result in tedious back-n-forth between the bug +reporter and the bug fixer. + +- Mention that you are in a "nested" setup. If you are running any kind + of "nesting" at all, say so. Unfortunately, this needs to be called + out because when reporting bugs, people tend to forget to even + *mention* that they're using nested virtualization. + +- Ensure you are actually running KVM on KVM. Sometimes people do not + have KVM enabled for their guest hypervisor (L1), which results in + them running with pure emulation or what QEMU calls it as "TCG", but + they think they're running nested KVM. Thus confusing "nested Virt" + (which could also mean, QEMU on KVM) with "nested KVM" (KVM on KVM). + +Information to collect (generic) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The following is not an exhaustive list, but a very good starting point: + + - Kernel, libvirt, and QEMU version from L0 + + - Kernel, libvirt and QEMU version from L1 + + - QEMU command-line of L1 -- when using libvirt, you'll find it here: + ``/var/log/libvirt/qemu/instance.log`` + + - QEMU command-line of L2 -- as above, when using libvirt, get the + complete libvirt-generated QEMU command-line + + - ``cat /sys/cpuinfo`` from L0 + + - ``cat /sys/cpuinfo`` from L1 + + - ``lscpu`` from L0 + + - ``lscpu`` from L1 + + - Full ``dmesg`` output from L0 + + - Full ``dmesg`` output from L1 + +x86-specific info to collect +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Both the below commands, ``x86info`` and ``dmidecode``, should be +available on most Linux distributions with the same name: + + - Output of: ``x86info -a`` from L0 + + - Output of: ``x86info -a`` from L1 + + - Output of: ``dmidecode`` from L0 + + - Output of: ``dmidecode`` from L1 + +s390x-specific info to collect +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Along with the earlier mentioned generic details, the below is +also recommended: + + - ``/proc/sysinfo`` from L1; this will also include the info from L0 diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst index fa7ddc0428c8..5325c71ca877 100644 --- a/Documentation/x86/boot.rst +++ b/Documentation/x86/boot.rst @@ -1399,8 +1399,8 @@ must have read/write permission; CS must be __BOOT_CS and DS, ES, SS must be __BOOT_DS; interrupt must be disabled; %rsi must hold the base address of the struct boot_params. -EFI Handover Protocol -===================== +EFI Handover Protocol (deprecated) +================================== This protocol allows boot loaders to defer initialisation to the EFI boot stub. The boot loader is required to load the kernel/initrd(s) @@ -1408,6 +1408,12 @@ from the boot media and jump to the EFI handover protocol entry point which is hdr->handover_offset bytes from the beginning of startup_{32,64}. +The boot loader MUST respect the kernel's PE/COFF metadata when it comes +to section alignment, the memory footprint of the executable image beyond +the size of the file itself, and any other aspect of the PE/COFF header +that may affect correct operation of the image as a PE/COFF binary in the +execution context provided by the EFI firmware. + The function prototype for the handover entry point looks like this:: efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp) @@ -1419,9 +1425,18 @@ UEFI specification. 'bp' is the boot loader-allocated boot params. The boot loader *must* fill out the following fields in bp:: - - hdr.code32_start - hdr.cmd_line_ptr - hdr.ramdisk_image (if applicable) - hdr.ramdisk_size (if applicable) All other fields should be zero. + +NOTE: The EFI Handover Protocol is deprecated in favour of the ordinary PE/COFF + entry point, combined with the LINUX_EFI_INITRD_MEDIA_GUID based initrd + loading protocol (refer to [0] for an example of the bootloader side of + this), which removes the need for any knowledge on the part of the EFI + bootloader regarding the internal representation of boot_params or any + requirements/limitations regarding the placement of the command line + and ramdisk in memory, or the placement of the kernel image itself. + +[0] https://github.com/u-boot/u-boot/commit/ec80b4735a593961fe701cc3a5d717d4739b0fd0 |