diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/admin-guide/devices.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/serial/8250.txt | 19 |
2 files changed, 21 insertions, 2 deletions
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index 1649117e6087..e56e00655153 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -2693,8 +2693,8 @@ 41 = /dev/ttySMX0 Motorola i.MX - port 0 42 = /dev/ttySMX1 Motorola i.MX - port 1 43 = /dev/ttySMX2 Motorola i.MX - port 2 - 44 = /dev/ttyMM0 Marvell MPSC - port 0 - 45 = /dev/ttyMM1 Marvell MPSC - port 1 + 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused) + 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused) 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0 ... 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5 diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 3cba12f855b7..20d351f268ef 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -53,6 +53,9 @@ Optional properties: programmable TX FIFO thresholds. - resets : phandle + reset specifier pairs - overrun-throttle-ms : how long to pause uart rx when input overrun is encountered. +- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD + line respectively. It will use specified GPIO instead of the peripheral + function pin for the UART feature. If unsure, don't specify this property. Note: * fsl,ns16550: @@ -74,3 +77,19 @@ Example: interrupts = <10>; reg-shift = <2>; }; + +Example for OMAP UART using GPIO-based modem control signals: + + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; |