diff options
Diffstat (limited to 'arch/arm/mach-integrator/impd1.c')
-rw-r--r-- | arch/arm/mach-integrator/impd1.c | 475 |
1 files changed, 0 insertions, 475 deletions
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c deleted file mode 100644 index 6f875ded8419..000000000000 --- a/arch/arm/mach-integrator/impd1.c +++ /dev/null @@ -1,475 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-integrator/impd1.c - * - * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. - * - * This file provides the core support for the IM-PD1 module. - * - * Module / boot parameters. - * lmid=n impd1.lmid=n - set the logic module position in stack to 'n' - */ -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/amba/mmci.h> -#include <linux/io.h> -#include <linux/platform_data/clk-integrator.h> -#include <linux/slab.h> -#include <linux/irqchip/arm-vic.h> -#include <linux/gpio/machine.h> - -#include <linux/sizes.h> -#include "lm.h" -#include "impd1.h" - -static int module_id; - -module_param_named(lmid, module_id, int, 0444); -MODULE_PARM_DESC(lmid, "logic module stack position"); - -struct impd1_module { - void __iomem *base; - void __iomem *vic_base; -}; - -void impd1_tweak_control(struct device *dev, u32 mask, u32 val) -{ - struct impd1_module *impd1 = dev_get_drvdata(dev); - u32 cur; - - val &= mask; - cur = readl(impd1->base + IMPD1_CTRL) & ~mask; - writel(cur | val, impd1->base + IMPD1_CTRL); -} - -EXPORT_SYMBOL(impd1_tweak_control); - -/* - * MMC support - */ -static struct mmci_platform_data mmc_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, -}; - -/* - * CLCD support - */ -#define PANEL PROSPECTOR - -#define LTM10C209 1 -#define PROSPECTOR 2 -#define SVGA 3 -#define VGA 4 - -#if PANEL == VGA -#define PANELTYPE vga -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551, - .connector = IMPD1_CTRL_DISP_VGA, - .bpp = 16, - .grayscale = 0, -}; - -#elif PANEL == SVGA -#define PANELTYPE svga -static struct clcd_panel svga = { - .mode = { - .name = "SVGA", - .refresh = 0, - .xres = 800, - .yres = 600, - .pixclock = 27778, - .left_margin = 20, - .right_margin = 20, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 164, - .vsync_len = 62, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .connector = IMPD1_CTRL_DISP_VGA, - .caps = CLCD_CAP_5551, - .bpp = 16, - .grayscale = 0, -}; - -#elif PANEL == PROSPECTOR -#define PANELTYPE prospector -static struct clcd_panel prospector = { - .mode = { - .name = "PROSPECTOR", - .refresh = 0, - .xres = 640, - .yres = 480, - .pixclock = 40000, - .left_margin = 33, - .right_margin = 64, - .upper_margin = 36, - .lower_margin = 7, - .hsync_len = 64, - .vsync_len = 25, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551, - .fixedtimings = 1, - .connector = IMPD1_CTRL_DISP_LCD, - .bpp = 16, - .grayscale = 0, -}; - -#elif PANEL == LTM10C209 -#define PANELTYPE ltm10c209 -/* - * Untested. - */ -static struct clcd_panel ltm10c209 = { - .mode = { - .name = "LTM10C209", - .refresh = 0, - .xres = 640, - .yres = 480, - .pixclock = 40000, - .left_margin = 20, - .right_margin = 20, - .upper_margin = 19, - .lower_margin = 19, - .hsync_len = 20, - .vsync_len = 10, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551, - .fixedtimings = 1, - .connector = IMPD1_CTRL_DISP_LCD, - .bpp = 16, - .grayscale = 0, -}; -#endif - -/* - * Disable all display connectors on the interface module. - */ -static void impd1fb_clcd_disable(struct clcd_fb *fb) -{ - impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0); -} - -/* - * Enable the relevant connector on the interface module. - */ -static void impd1fb_clcd_enable(struct clcd_fb *fb) -{ - impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, - fb->panel->connector | IMPD1_CTRL_DISP_ENABLE); -} - -static int impd1fb_clcd_setup(struct clcd_fb *fb) -{ - unsigned long framebase = fb->dev->res.start + 0x01000000; - unsigned long framesize = SZ_1M; - int ret = 0; - - fb->panel = &PANELTYPE; - - if (!request_mem_region(framebase, framesize, "clcd framebuffer")) { - printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n"); - return -EBUSY; - } - - fb->fb.screen_base = ioremap(framebase, framesize); - if (!fb->fb.screen_base) { - printk(KERN_ERR "IM-PD1: unable to map framebuffer\n"); - ret = -ENOMEM; - goto free_buffer; - } - - fb->fb.fix.smem_start = framebase; - fb->fb.fix.smem_len = framesize; - - return 0; - - free_buffer: - release_mem_region(framebase, framesize); - return ret; -} - -static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - unsigned long start, size; - - start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT); - size = vma->vm_end - vma->vm_start; - - return remap_pfn_range(vma, vma->vm_start, start, size, - vma->vm_page_prot); -} - -static void impd1fb_clcd_remove(struct clcd_fb *fb) -{ - iounmap(fb->fb.screen_base); - release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} - -static struct clcd_board impd1_clcd_data = { - .name = "IM-PD/1", - .caps = CLCD_CAP_5551 | CLCD_CAP_888, - .check = clcdfb_check, - .decode = clcdfb_decode, - .disable = impd1fb_clcd_disable, - .enable = impd1fb_clcd_enable, - .setup = impd1fb_clcd_setup, - .mmap = impd1fb_clcd_mmap, - .remove = impd1fb_clcd_remove, -}; - -struct impd1_device { - unsigned long offset; - unsigned int irq[2]; - unsigned int id; - void *platform_data; -}; - -static struct impd1_device impd1_devs[] = { - { - .offset = 0x00100000, - .irq = { 1 }, - .id = 0x00141011, - }, { - .offset = 0x00200000, - .irq = { 2 }, - .id = 0x00141011, - }, { - .offset = 0x00300000, - .irq = { 3 }, - .id = 0x00041022, - }, { - .offset = 0x00400000, - .irq = { 4 }, - .id = 0x00041061, - }, { - .offset = 0x00500000, - .irq = { 5 }, - .id = 0x00041061, - }, { - .offset = 0x00600000, - .irq = { 6 }, - .id = 0x00041130, - }, { - .offset = 0x00700000, - .irq = { 7, 8 }, - .id = 0x00041181, - .platform_data = &mmc_data, - }, { - .offset = 0x00800000, - .irq = { 9 }, - .id = 0x00041041, - }, { - .offset = 0x01000000, - .irq = { 11 }, - .id = 0x00041110, - .platform_data = &impd1_clcd_data, - } -}; - -/* - * Valid IRQs: 0 thru 9 and 11, 10 unused. - */ -#define IMPD1_VALID_IRQS 0x00000bffU - -/* - * As this module is bool, it is OK to have this as __ref() - no - * probe calls will be done after the initial system bootup, as devices - * are discovered as part of the machine startup. - */ -static int __ref impd1_probe(struct lm_device *dev) -{ - struct impd1_module *impd1; - int irq_base; - int i; - - if (dev->id != module_id) - return -EINVAL; - - if (!devm_request_mem_region(&dev->dev, dev->resource.start, - SZ_4K, "LM registers")) - return -EBUSY; - - impd1 = devm_kzalloc(&dev->dev, sizeof(struct impd1_module), - GFP_KERNEL); - if (!impd1) - return -ENOMEM; - - impd1->base = devm_ioremap(&dev->dev, dev->resource.start, SZ_4K); - if (!impd1->base) - return -ENOMEM; - - integrator_impd1_clk_init(impd1->base, dev->id); - - if (!devm_request_mem_region(&dev->dev, - dev->resource.start + 0x03000000, - SZ_4K, "VIC")) - return -EBUSY; - - impd1->vic_base = devm_ioremap(&dev->dev, - dev->resource.start + 0x03000000, - SZ_4K); - if (!impd1->vic_base) - return -ENOMEM; - - irq_base = vic_init_cascaded(impd1->vic_base, dev->irq, - IMPD1_VALID_IRQS, 0); - - lm_set_drvdata(dev, impd1); - - dev_info(&dev->dev, "IM-PD1 found at 0x%08lx\n", - (unsigned long)dev->resource.start); - - for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { - struct impd1_device *idev = impd1_devs + i; - struct amba_device *d; - unsigned long pc_base; - char devname[32]; - int irq1 = idev->irq[0]; - int irq2 = idev->irq[1]; - - /* Translate IRQs to IM-PD1 local numberspace */ - if (irq1) - irq1 += irq_base; - if (irq2) - irq2 += irq_base; - - pc_base = dev->resource.start + idev->offset; - snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); - - /* Add GPIO descriptor lookup table for the PL061 block */ - if (idev->offset == 0x00400000) { - struct gpiod_lookup_table *lookup; - char *chipname; - char *mmciname; - - lookup = devm_kzalloc(&dev->dev, - struct_size(lookup, table, 3), - GFP_KERNEL); - chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL); - mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL, - "lm%x:00700", dev->id); - if (!lookup || !chipname || !mmciname) - return -ENOMEM; - - lookup->dev_id = mmciname; - /* - * Offsets on GPIO block 1: - * 3 = MMC WP (write protect) - * 4 = MMC CD (card detect) - * - * Offsets on GPIO block 2: - * 0 = Up key - * 1 = Down key - * 2 = Left key - * 3 = Right key - * 4 = Key lower left - * 5 = Key lower right - */ - /* We need the two MMCI GPIO entries */ - lookup->table[0] = (struct gpiod_lookup) - GPIO_LOOKUP(chipname, 3, "wp", 0); - lookup->table[1] = (struct gpiod_lookup) - GPIO_LOOKUP(chipname, 4, "cd", GPIO_ACTIVE_LOW); - gpiod_add_lookup_table(lookup); - } - - d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, - irq1, irq2, - idev->platform_data, idev->id, - &dev->resource); - if (IS_ERR(d)) { - dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d)); - continue; - } - } - - return 0; -} - -static int impd1_remove_one(struct device *dev, void *data) -{ - device_unregister(dev); - return 0; -} - -static void impd1_remove(struct lm_device *dev) -{ - device_for_each_child(&dev->dev, NULL, impd1_remove_one); - integrator_impd1_clk_exit(dev->id); - - lm_set_drvdata(dev, NULL); -} - -static struct lm_driver impd1_driver = { - .drv = { - .name = "impd1", - /* - * As we're dropping the probe() function, suppress driver - * binding from sysfs. - */ - .suppress_bind_attrs = true, - }, - .probe = impd1_probe, - .remove = impd1_remove, -}; - -static int __init impd1_init(void) -{ - return lm_driver_register(&impd1_driver); -} - -static void __exit impd1_exit(void) -{ - lm_driver_unregister(&impd1_driver); -} - -module_init(impd1_init); -module_exit(impd1_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Integrator/IM-PD1 logic module core driver"); -MODULE_AUTHOR("Deep Blue Solutions Ltd"); |