diff options
Diffstat (limited to 'arch/arm')
492 files changed, 8023 insertions, 11551 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 97864aabc2a6..66a04f6f4775 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -3,7 +3,6 @@ config ARM bool default y select ARCH_32BIT_OFF_T - select ARCH_CLOCKSOURCE_DATA select ARCH_HAS_BINFMT_FLAT select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DEVMEM_IS_ALLOWED @@ -2091,5 +2090,3 @@ source "drivers/firmware/Kconfig" if CRYPTO source "arch/arm/crypto/Kconfig" endif - -source "arch/arm/kvm/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b70d7debf5ca..f46e18a77645 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1201,23 +1201,49 @@ choice config STM32F4_DEBUG_UART bool "Use STM32F4 UART for low-level debug" - depends on ARCH_STM32 + depends on MACH_STM32F429 || MACH_STM32F469 select DEBUG_STM32_UART help Say Y here if you want kernel low-level debugging support on STM32F4 based platforms, which default UART is wired on - USART1. + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. If unsure, say N. config STM32F7_DEBUG_UART bool "Use STM32F7 UART for low-level debug" - depends on ARCH_STM32 + depends on MACH_STM32F746 || MACH_STM32F769 select DEBUG_STM32_UART help Say Y here if you want kernel low-level debugging support on STM32F7 based platforms, which default UART is wired on - USART1. + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. + + If unsure, say N. + + config STM32H7_DEBUG_UART + bool "Use STM32H7 UART for low-level debug" + depends on MACH_STM32H743 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32H7 based platforms, which default UART is wired on + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. + + If unsure, say N. + + config STM32MP1_DEBUG_UART + bool "Use STM32MP1 UART for low-level debug" + depends on MACH_STM32MP157 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32MP1 based platforms, wich default UART is wired on + UART4, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT. If unsure, say N. @@ -1619,6 +1645,9 @@ config DEBUG_UART_PHYS default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x3f201000 if DEBUG_BCM2836 default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x40010000 if STM32MP1_DEBUG_UART + default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \ + STM32H7_DEBUG_UART default 0x40028000 if DEBUG_AT91_SAMV7_USART1 default 0x40081000 if DEBUG_LPC18XX_UART0 default 0x40090000 if DEBUG_LPC32XX @@ -1713,7 +1742,7 @@ config DEBUG_UART_PHYS DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART + DEBUG_AT91_UART || DEBUG_STM32_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1779,6 +1808,7 @@ config DEBUG_UART_VIRT default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX default 0xfd883000 if DEBUG_ALPINE_UART0 + default 0xfe010000 if STM32MP1_DEBUG_UART default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART @@ -1823,7 +1853,7 @@ config DEBUG_UART_VIRT DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART + DEBUG_AT91_UART || DEBUG_STM32_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1fc32b611f8a..7d5cd0f85461 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif +textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 textofs-$(CONFIG_ARCH_MESON) := 0x00208000 @@ -278,7 +279,6 @@ core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(patsubst $(srctree)/%,%,$(wildcard $(srctree)/arch/arm/fastfpe/)) core-$(CONFIG_VFP) += arch/arm/vfp/ core-$(CONFIG_XEN) += arch/arm/xen/ -core-$(CONFIG_KVM_ARM_HOST) += arch/arm/kvm/ core-$(CONFIG_VDSO) += arch/arm/vdso/ # If we have a machine-specific directory, then include it in the build. diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore index ce1c5ff746e7..8c759326baf4 100644 --- a/arch/arm/boot/.gitignore +++ b/arch/arm/boot/.gitignore @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only Image zImage xipImage diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index 86b2f5d28240..db05c6ef3e31 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ashldi3.S bswapsdi2.S font.c diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S index a5983588f96b..62286da318e7 100644 --- a/arch/arm/boot/compressed/efi-header.S +++ b/arch/arm/boot/compressed/efi-header.S @@ -60,7 +60,7 @@ optional_header: .long __pecoff_code_size @ SizeOfCode .long __pecoff_data_size @ SizeOfInitializedData .long 0 @ SizeOfUninitializedData - .long efi_stub_entry - start @ AddressOfEntryPoint + .long efi_entry - start @ AddressOfEntryPoint .long start_offset @ BaseOfCode .long __pecoff_data_start - start @ BaseOfData @@ -70,8 +70,8 @@ extra_header_fields: .long SZ_512 @ FileAlignment .short 0 @ MajorOsVersion .short 0 @ MinorOsVersion - .short 0 @ MajorImageVersion - .short 0 @ MinorImageVersion + .short LINUX_EFISTUB_MAJOR_VERSION @ MajorImageVersion + .short LINUX_EFISTUB_MINOR_VERSION @ MinorImageVersion .short 0 @ MajorSubsystemVersion .short 0 @ MinorSubsystemVersion .long 0 @ Win32VersionValue diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 088b0a060876..e8e1c866e413 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -151,6 +151,25 @@ .L_\@: .endm + /* + * The kernel build system appends the size of the + * decompressed kernel at the end of the compressed data + * in little-endian form. + */ + .macro get_inflated_image_size, res:req, tmp1:req, tmp2:req + adr \res, .Linflated_image_size_offset + ldr \tmp1, [\res] + add \tmp1, \tmp1, \res @ address of inflated image size + + ldrb \res, [\tmp1] @ get_unaligned_le32 + ldrb \tmp2, [\tmp1, #1] + orr \res, \res, \tmp2, lsl #8 + ldrb \tmp2, [\tmp1, #2] + ldrb \tmp1, [\tmp1, #3] + orr \res, \res, \tmp2, lsl #16 + orr \res, \res, \tmp1, lsl #24 + .endm + .section ".start", "ax" /* * sort out different calling conventions @@ -268,15 +287,15 @@ not_angel: */ mov r0, pc cmp r0, r4 - ldrcc r0, LC0+32 + ldrcc r0, LC0+28 addcc r0, r0, pc cmpcc r4, r0 orrcc r4, r4, #1 @ remember we skipped cache_on blcs cache_on restart: adr r0, LC0 - ldmia r0, {r1, r2, r3, r6, r10, r11, r12} - ldr sp, [r0, #28] + ldmia r0, {r1, r2, r3, r6, r11, r12} + ldr sp, [r0, #24] /* * We might be running at a different address. We need @@ -284,20 +303,8 @@ restart: adr r0, LC0 */ sub r0, r0, r1 @ calculate the delta offset add r6, r6, r0 @ _edata - add r10, r10, r0 @ inflated kernel size location - /* - * The kernel build system appends the size of the - * decompressed kernel at the end of the compressed data - * in little-endian form. - */ - ldrb r9, [r10, #0] - ldrb lr, [r10, #1] - orr r9, r9, lr, lsl #8 - ldrb lr, [r10, #2] - ldrb r10, [r10, #3] - orr r9, r9, lr, lsl #16 - orr r9, r9, r10, lsl #24 + get_inflated_image_size r9, r10, lr #ifndef CONFIG_ZBOOT_ROM /* malloc space is above the relocated stack (64k max) */ @@ -521,11 +528,8 @@ dtb_check_done: /* Preserve offset to relocated code. */ sub r6, r9, r6 -#ifndef CONFIG_ZBOOT_ROM - /* cache_clean_flush may use the stack, so relocate it */ - add sp, sp, r6 -#endif - + mov r0, r9 @ start of relocated zImage + add r1, sp, r6 @ end of relocated zImage bl cache_clean_flush badr r0, restart @@ -622,6 +626,11 @@ not_relocated: mov r0, #0 add r2, sp, #0x10000 @ 64k max mov r3, r7 bl decompress_kernel + + get_inflated_image_size r1, r2, r3 + + mov r0, r4 @ start of inflated image + add r1, r1, r0 @ end of inflated image bl cache_clean_flush bl cache_off @@ -652,13 +661,15 @@ LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 .word _edata @ r6 - .word input_data_end - 4 @ r10 (inflated size location) .word _got_start @ r11 .word _got_end @ ip .word .L_user_stack_end @ sp .word _end - restart + 16384 + 1024*1024 .size LC0, . - LC0 +.Linflated_image_size_offset: + .long (input_data_end - 4) - . + #ifdef CONFIG_ARCH_RPC .globl params params: ldr r0, =0x10000100 @ params_phys for RPC @@ -668,6 +679,24 @@ params: ldr r0, =0x10000100 @ params_phys for RPC #endif /* + * dcache_line_size - get the minimum D-cache line size from the CTR register + * on ARMv7. + */ + .macro dcache_line_size, reg, tmp +#ifdef CONFIG_CPU_V7M + movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR + movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR + ldr \tmp, [\tmp] +#else + mrc p15, 0, \tmp, c0, c0, 1 @ read ctr +#endif + lsr \tmp, \tmp, #16 + and \tmp, \tmp, #0xf @ cache line size encoding + mov \reg, #4 @ bytes per word + mov \reg, \reg, lsl \tmp @ actual cache line size + .endm + +/* * Turn on the cache. We need to setup some page tables so that we * can have both the I and D caches on. * @@ -1159,8 +1188,6 @@ __armv7_mmu_cache_off: bic r0, r0, #0x000c #endif mcr p15, 0, r0, c1, c0 @ turn MMU and cache off - mov r12, lr - bl __armv7_mmu_cache_flush mov r0, #0 #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB @@ -1168,11 +1195,14 @@ __armv7_mmu_cache_off: mcr p15, 0, r0, c7, c5, 6 @ invalidate BTC mcr p15, 0, r0, c7, c10, 4 @ DSB mcr p15, 0, r0, c7, c5, 4 @ ISB - mov pc, r12 + mov pc, lr /* * Clean and flush the cache to maintain consistency. * + * On entry, + * r0 = start address + * r1 = end address (exclusive) * On exit, * r1, r2, r3, r9, r10, r11, r12 corrupted * This routine must preserve: @@ -1181,6 +1211,7 @@ __armv7_mmu_cache_off: .align 5 cache_clean_flush: mov r3, #16 + mov r11, r1 b call_cache_fn __armv4_mpu_cache_flush: @@ -1231,51 +1262,16 @@ __armv7_mmu_cache_flush: mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D b iflush hierarchical: - mcr p15, 0, r10, c7, c10, 5 @ DMB - stmfd sp!, {r0-r7, r9-r11} - mrc p15, 1, r0, c0, c0, 1 @ read clidr - ands r3, r0, #0x7000000 @ extract loc from clidr - mov r3, r3, lsr #23 @ left align loc bit field - beq finished @ if loc is 0, then no need to clean - mov r10, #0 @ start clean at cache level 0 -loop1: - add r2, r10, r10, lsr #1 @ work out 3x current cache level - mov r1, r0, lsr r2 @ extract cache type bits from clidr - and r1, r1, #7 @ mask of the bits for current cache only - cmp r1, #2 @ see what cache we have at this level - blt skip @ skip if no cache, or just i-cache - mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr - mcr p15, 0, r10, c7, c5, 4 @ isb to sych the new cssr&csidr - mrc p15, 1, r1, c0, c0, 0 @ read the new csidr - and r2, r1, #7 @ extract the length of the cache lines - add r2, r2, #4 @ add 4 (line length offset) - ldr r4, =0x3ff - ands r4, r4, r1, lsr #3 @ find maximum number on the way size - clz r5, r4 @ find bit position of way size increment - ldr r7, =0x7fff - ands r7, r7, r1, lsr #13 @ extract max number of the index size -loop2: - mov r9, r4 @ create working copy of max way size -loop3: - ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11 - ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11 - THUMB( lsl r6, r9, r5 ) - THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 - THUMB( lsl r6, r7, r2 ) - THUMB( orr r11, r11, r6 ) @ factor index number into r11 - mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way - subs r9, r9, #1 @ decrement the way - bge loop3 - subs r7, r7, #1 @ decrement the index - bge loop2 -skip: - add r10, r10, #2 @ increment cache number - cmp r3, r10 - bgt loop1 -finished: - ldmfd sp!, {r0-r7, r9-r11} - mov r10, #0 @ switch back to cache level 0 - mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + dcache_line_size r1, r2 @ r1 := dcache min line size + sub r2, r1, #1 @ r2 := line size mask + bic r0, r0, r2 @ round down start to line size + sub r11, r11, #1 @ end address is exclusive + bic r11, r11, r2 @ round down end to line size +0: cmp r0, r11 @ finished? + bgt iflush + mcr p15, 0, r0, c7, c14, 1 @ Dcache clean/invalidate by VA + add r0, r0, r1 + b 0b iflush: mcr p15, 0, r10, c7, c10, 4 @ DSB mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB @@ -1437,29 +1433,26 @@ __enter_kernel: reloc_code_end: #ifdef CONFIG_EFI_STUB - .align 2 -_start: .long start - . - -ENTRY(efi_stub_entry) - @ allocate space on stack for passing current zImage address - @ and for the EFI stub to return of new entry point of - @ zImage, as EFI stub may copy the kernel. Pointer address - @ is passed in r2. r0 and r1 are passed through from the - @ EFI firmware to efi_entry - adr ip, _start - ldr r3, [ip] - add r3, r3, ip - stmfd sp!, {r3, lr} - mov r2, sp @ pass zImage address in r2 - bl efi_entry - - @ Check for error return from EFI stub. r0 has FDT address - @ or error code. - cmn r0, #1 - beq efi_load_fail - - @ Preserve return value of efi_entry() in r4 - mov r4, r0 +ENTRY(efi_enter_kernel) + mov r7, r0 @ preserve image base + mov r4, r1 @ preserve DT pointer + + mov r0, r4 @ DT start + add r1, r4, r2 @ DT end + bl cache_clean_flush + + mov r0, r7 @ relocated zImage + ldr r1, =_edata @ size of zImage + add r1, r1, r0 @ end of zImage + bl cache_clean_flush + + @ The PE/COFF loader might not have cleaned the code we are + @ running beyond the PoU, and so calling cache_off below from + @ inside the PE/COFF loader allocated region is unsafe unless + @ we explicitly clean it to the PoC. + ARM( adrl r0, call_cache_fn ) + THUMB( adr r0, call_cache_fn ) @ region of code we will + adr r1, 0f @ run with MMU off bl cache_clean_flush bl cache_off @@ -1469,18 +1462,10 @@ ENTRY(efi_stub_entry) mov r0, #0 mov r1, #0xFFFFFFFF mov r2, r4 - - @ Branch to (possibly) relocated zImage that is in [sp] - ldr lr, [sp] - ldr ip, =start_offset - add lr, lr, ip - mov pc, lr @ no mode switch - -efi_load_fail: - @ Return EFI_LOAD_ERROR to EFI firmware on error. - ldr r0, =0x80000001 - ldmfd sp!, {ip, pc} -ENDPROC(efi_stub_entry) + add r7, r7, #(__efi_start - start) + mov pc, r7 @ no mode switch +ENDPROC(efi_enter_kernel) +0: #endif .align diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index fc7ed03d8b93..b247f399de71 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -36,7 +36,6 @@ SECTIONS *(.start) *(.text) *(.text.*) - *(.fixup) *(.gnu.warning) *(.glue_7t) *(.glue_7) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d6546d2676b9..e8dd99201397 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -446,6 +446,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-mira-rdk-nand.dtb \ imx6dl-phytec-pbab01.dtb \ + imx6dl-pico-dwarf.dtb \ + imx6dl-pico-hobbit.dtb \ + imx6dl-pico-nymph.dtb \ + imx6dl-pico-pi.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ @@ -529,6 +533,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-phytec-mira-rdk-emmc.dtb \ imx6q-phytec-mira-rdk-nand.dtb \ imx6q-phytec-pbab01.dtb \ + imx6q-pico-dwarf.dtb \ + imx6q-pico-hobbit.dtb \ + imx6q-pico-nymph.dtb \ + imx6q-pico-pi.dtb \ imx6q-pistachio.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ @@ -594,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-kontron-n6310-s-43.dtb \ imx6ul-liteboard.dtb \ imx6ul-opos6uldev.dtb \ + imx6ul-pico-dwarf.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-pico-pi.dtb \ imx6ul-phytec-segin-ff-rdk-nand.dtb \ @@ -610,12 +619,16 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ulz-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ + imx7d-colibri-aster.dtb \ + imx7d-colibri-emmc-aster.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-mba7.dtb \ imx7d-meerkat96.dtb \ imx7d-nitrogen7.dtb \ + imx7d-pico-dwarf.dtb \ imx7d-pico-hobbit.dtb \ + imx7d-pico-nymph.dtb \ imx7d-pico-pi.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ @@ -623,6 +636,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb-sht11.dtb \ imx7d-zii-rmu2.dtb \ imx7d-zii-rpu2.dtb \ + imx7s-colibri-aster.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-mba7.dtb \ imx7s-warp.dtb @@ -1016,6 +1030,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-disco.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dk1.dtb \ + stm32mp157c-dhcom-pdk2.dtb \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb @@ -1056,6 +1071,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-licheepi-one.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-pocketbook-touch-lux-3.dtb \ sun5i-a13-q8-tablet.dtb \ sun5i-a13-utoo-p66.dtb \ sun5i-gr8-chip-pro.dtb \ @@ -1086,6 +1102,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ sun7i-a20-lamobo-r1.dtb \ + sun7i-a20-linutronix-testbox-v2.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ @@ -1202,7 +1219,8 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-hrefv60plus-stuib.dtb \ ste-hrefv60plus-tvk.dtb \ ste-href520-tvk.dtb \ - ste-ux500-samsung-golden.dtb + ste-ux500-samsung-golden.dtb \ + ste-ux500-samsung-skomer.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ld4-ref.dtb \ uniphier-ld6b-ref.dtb \ diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 4e2986f0c604..5ed7f3c58c0f 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -759,12 +759,27 @@ ranges = <0x0 0x200000 0x80000>; }; - target-module@300000 { /* 0x4a300000, ap 9 04.0 */ - compatible = "ti,sysc"; - status = "disabled"; + pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */ + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x326000 0x4>, + <0x326004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_per 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x300000 0x80000>; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 41dcfb37155a..a35f5052d76f 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -47,6 +47,7 @@ #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a8"; + enable-method = "ti,am3352"; device_type = "cpu"; reg = <0>; @@ -56,6 +57,17 @@ clock-names = "cpu"; clock-latency = <300000>; /* From omap-cpufreq driver */ + cpu-idle-states = <&mpu_gate>; + }; + + idle-states { + mpu_gate: mpu_gate { + compatible = "arm,idle-state"; + entry-latency-us = <40>; + exit-latency-us = <90>; + min-residency-us = <300>; + ti,idle-wkup-m3; + }; }; }; @@ -193,45 +205,100 @@ reg = <0x48200000 0x1000>; }; - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 0>; - - ti,edma-memcpy-channels = <20 21>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 0>; + + ti,edma-memcpy-channels = <20 21>; + }; }; - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <112>; - interrupt-names = "edma3_tcerrint"; + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <113>; - interrupt-names = "edma3_tcerrint"; + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <114>; - interrupt-names = "edma3_tcerrint"; + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; }; target-module@47810000 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index faa14dc0faff..dba87bfaf33e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -45,6 +45,7 @@ #size-cells = <0>; cpu: cpu@0 { compatible = "arm,cortex-a9"; + enable-method = "ti,am4372"; device_type = "cpu"; reg = <0>; @@ -54,6 +55,17 @@ operating-points-v2 = <&cpu0_opp_table>; clock-latency = <300000>; /* From omap-cpufreq driver */ + cpu-idle-states = <&mpu_gate>; + }; + + idle-states { + mpu_gate: mpu_gate { + compatible = "arm,idle-state"; + entry-latency-us = <40>; + exit-latency-us = <100>; + min-residency-us = <300>; + local-timer-stop; + }; }; }; @@ -185,47 +197,102 @@ &pm_sram_data>; }; - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 0>; - - ti,edma-memcpy-channels = <58 59>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 0>; + + ti,edma-memcpy-channels = <58 59>; + }; }; - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; target-module@47810000 { @@ -344,6 +411,28 @@ }; }; + pruss_tm: target-module@54400000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x54426000 0x4>, + <0x54426004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_per 1>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54400000 0x80000>; + }; + gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; @@ -394,38 +483,6 @@ }; }; - dss: dss@4832a000 { - compatible = "ti,omap3-dss"; - reg = <0x4832a000 0x200>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&disp_clk>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dispc: dispc@4832a400 { - compatible = "ti,omap3-dispc"; - reg = <0x4832a400 0x400>; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&disp_clk>; - clock-names = "fck"; - - max-memory-bandwidth = <230000000>; - }; - - rfbi: rfbi@4832a800 { - compatible = "ti,omap3-rfbi"; - reg = <0x4832a800 0x100>; - ti,hwmods = "dss_rfbi"; - clocks = <&disp_clk>; - clock-names = "fck"; - status = "disabled"; - }; - }; - ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x40000>; /* 256k */ diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index e18e17d31272..49c6a872052e 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -2117,7 +2117,6 @@ target-module@2a000 { /* 0x4832a000, ap 88 3c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "dss_core"; reg = <0x2a000 0x4>, <0x2a010 0x4>, <0x2a014 0x4>; @@ -2135,6 +2134,82 @@ <0x00000800 0x0002a800 0x00000400>, <0x00000c00 0x0002ac00 0x00000400>, <0x00001000 0x0002b000 0x00001000>; + + dss: dss@0 { + compatible = "ti,omap3-dss"; + reg = <0 0x200>; + status = "disabled"; + clocks = <&disp_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00000400>, + <0x00000400 0x00000400 0x00000400>, + <0x00000800 0x00000800 0x00000400>, + <0x00000c00 0x00000c00 0x00000400>, + <0x00001000 0x00001000 0x00001000>; + + target-module@400 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x400 0x4>, + <0x410 0x4>, + <0x414 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x400>; + + dispc: dispc@0 { + compatible = "ti,omap3-dispc"; + reg = <0 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&disp_clk>; + clock-names = "fck"; + + max-memory-bandwidth = <230000000>; + }; + }; + + target-module@800 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x800 0x4>, + <0x810 0x4>, + <0x814 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x400>; + + rfbi: rfbi@0 { + compatible = "ti,omap3-rfbi"; + reg = <0 0x100>; + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + status = "disabled"; + }; + }; + }; }; target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */ diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi new file mode 100644 index 000000000000..b1c583dee10b --- /dev/null +++ b/arch/arm/boot/dts/am57-pruss.dtsi @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + * + * Common PRUSS data for TI AM57xx platforms + */ + +&ocp { + pruss1_tm: target-module@4b226000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x4b226000 0x4>, + <0x4b226004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b200000 0x80000>; + }; + + pruss2_tm: target-module@4b2a6000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x4b2a6000 0x4>, + <0x4b2a6004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b280000 0x80000>; + }; +}; diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi index d51007c3e8c4..a80c2e3eee2e 100644 --- a/arch/arm/boot/dts/am5718.dtsi +++ b/arch/arm/boot/dts/am5718.dtsi @@ -4,6 +4,7 @@ */ #include "dra72x.dtsi" +#include "am57-pruss.dtsi" / { compatible = "ti,am5718", "ti,dra7"; diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi index 82e5427ef6a9..9a3810f5adcc 100644 --- a/arch/arm/boot/dts/am5728.dtsi +++ b/arch/arm/boot/dts/am5728.dtsi @@ -4,6 +4,7 @@ */ #include "dra74x.dtsi" +#include "am57-pruss.dtsi" / { compatible = "ti,am5728", "ti,dra7"; diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi index 5e129759d04a..2b65317b1513 100644 --- a/arch/arm/boot/dts/am5748.dtsi +++ b/arch/arm/boot/dts/am5748.dtsi @@ -4,6 +4,7 @@ */ #include "dra76x.dtsi" +#include "am57-pruss.dtsi" / { compatible = "ti,am5748", "ti,dra762", "ti,dra7"; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index 09f3f544f3a7..f61bd59ae5ba 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -210,7 +210,7 @@ }; }; - soc: soc@0 { + soc: soc { compatible = "arm,realview-pbx-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 807a0fc20670..8e04303e8514 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -164,6 +164,8 @@ reg = <0x1e6a0000 0x300>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2d_default>; status = "disabled"; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index ebec0fa8baa7..f12ec04d3cbc 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -195,6 +195,8 @@ reg = <0x1e6a0000 0x300>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2ad_default>; status = "disabled"; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index 045ce66ca876..7028e21bdd98 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -1112,6 +1112,31 @@ groups = "UART9"; }; + pinctrl_usb2ah_default: usb2ah_default { + function = "USB2AH"; + groups = "USBA"; + }; + + pinctrl_usb2ad_default: usb2ad_default { + function = "USB2AD"; + groups = "USBA"; + }; + + pinctrl_usb2bh_default: usb2bh_default { + function = "USB2BH"; + groups = "USBB"; + }; + + pinctrl_usb2bd_default: usb2bd_default { + function = "USB2BD"; + groups = "USBB"; + }; + + pinctrl_usb11bhid_default: usb11bhid_default { + function = "USB11BHID"; + groups = "USBB"; + }; + pinctrl_vb_default: vb_default { function = "VB"; groups = "VB"; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 796976d275e1..0a29b3b57a9d 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -245,6 +245,51 @@ status = "disabled"; }; + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2600-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ah_default>; + status = "disabled"; + }; + + ehci1: usb@1e6a3000 { + compatible = "aspeed,ast2600-ehci", "generic-ehci"; + reg = <0x1e6a3000 0x100>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bh_default>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2600-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #ports = <2>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + /* + * No default pinmux, it will follow EHCI, use an + * explicit pinmux override if EHCI is not enabled. + */ + }; + + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2600-usb-vhub"; + reg = <0x1e6a0000 0x350>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi index df0f0cc575c1..bea920b192b6 100644 --- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi +++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi @@ -17,7 +17,7 @@ }; panel: panel { - compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel"; + compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92"; backlight = <&backlight>; power-supply = <&vcc_lcd_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 9f30132d7d7b..b484745bf2d4 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -645,3 +645,8 @@ &usb2 { status = "okay"; }; + +&watchdog { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index 0b9fa2942dff..6b8461278950 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -186,6 +186,11 @@ pinmux = <PIN_PA10__GPIO>; bias-disable; }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA16__GPIO>; + bias-disable; + }; }; &pwm0 { @@ -248,6 +253,13 @@ status = "okay"; }; +&usb0 { + atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + &usb1 { num-ports = <3>; atmel,vbus-gpio = <0 diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index ba7f3e646c26..1c24ac8019ba 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -180,8 +180,11 @@ i2c0: i2c@f8028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -198,8 +201,11 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx0_default>; + pinctrl-1 = <&pinctrl_flx0_gpio>; + sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>; atmel,fifo-size = <16>; status = "okay"; }; @@ -226,8 +232,11 @@ i2c1: i2c@fc028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>; status = "okay"; at24@50 { @@ -244,18 +253,36 @@ bias-disable; }; + pinctrl_flx0_gpio: flx0_gpio { + pinmux = <PIN_PB28__GPIO>, + <PIN_PB29__GPIO>; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = <PIN_PD21__TWD0>, <PIN_PD22__TWCK0>; bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_i2c1_default: i2c1_default { pinmux = <PIN_PC6__TWD1>, <PIN_PC7__TWCK1>; bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PC6__GPIO>, + <PIN_PC7__GPIO>; + bias-disable; + }; + pinctrl_key_gpio_default: key_gpio_default { pinmux = <PIN_PA10__GPIO>; bias-pull-up; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 9d0a7fbea725..055ee53e4773 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -129,8 +129,11 @@ i2c0: i2c@f8028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; i2c-sda-hold-time-ns = <350>; status = "okay"; @@ -331,8 +334,11 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx4_default>; + pinctrl-1 = <&pinctrl_flx4_gpio>; + sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>; atmel,fifo-size = <16>; i2c-analog-filter; i2c-digital-filter; @@ -343,11 +349,14 @@ i2c1: i2c@fc028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>; status = "okay"; at24@54 { @@ -441,18 +450,36 @@ bias-disable; }; + pinctrl_flx4_gpio: flx4_gpio { + pinmux = <PIN_PD12__GPIO>, + <PIN_PD13__GPIO>; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = <PIN_PD21__TWD0>, <PIN_PD22__TWCK0>; bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_i2c1_default: i2c1_default { pinmux = <PIN_PD4__TWD1>, <PIN_PD5__TWCK1>; bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PD4__GPIO>, + <PIN_PD5__GPIO>; + bias-disable; + }; + pinctrl_i2s0_default: i2s0_default { pinmux = <PIN_PC1__I2SC0_CK>, <PIN_PC2__I2SC0_MCK>, diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts index af4969485c88..4d7cee569ff2 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -136,7 +136,7 @@ panel: panel { /* Actually Ampire 800480R2 */ - compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + compatible = "foxlink,fl500wvr00-a0t"; backlight = <&backlight>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index ea5cef0b0974..d36e162a8817 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -238,7 +238,7 @@ }; panel: panel { - compatible = "qiaodian,qd43003c0-40", "simple-panel"; + compatible = "qiaodian,qd43003c0-40"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi index 7f00c1f57b90..a9278038af3b 100644 --- a/arch/arm/boot/dts/at91sam9x5dm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi @@ -27,7 +27,7 @@ }; panel: panel { - compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + compatible = "foxlink,fl500wvr00-a0t"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index efea891b1a76..e26ea9006378 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -20,6 +20,7 @@ }; aliases { + emmc2bus = &emmc2bus; ethernet0 = &genet; pcie0 = &pcie0; }; @@ -74,6 +75,79 @@ }; }; +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", + "RGMII_TXD2", + "RGMII_TXD3"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index d1e684d0acfd..a91cf68e3c4c 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -241,17 +241,32 @@ status = "disabled"; }; + hvs@7e400000 { + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + /* + * emmc2 has different DMA constraints based on SoC revisions. It was + * moved into its own bus, so as for RPi4's firmware to update them. + * The firmware will find whether the emmc2bus alias is defined, and if + * so, it'll edit the dma-ranges property below accordingly. + */ + emmc2bus: emmc2bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>; + dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>; + emmc2: emmc2@7e340000 { compatible = "brcm,bcm2711-emmc2"; - reg = <0x7e340000 0x100>; + reg = <0x0 0x7e340000 0x100>; interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clocks BCM2711_CLOCK_EMMC2>; status = "disabled"; }; - - hvs@7e400000 { - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - }; }; arm-pmu { diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index b75af21069f9..4c3f606e5b8d 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -112,6 +112,7 @@ &sdhci { #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; bus-width = <4>; mmc-pwrseq = <&wifi_pwrseq>; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 394c8a71b13b..f7ae5a4530b8 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -14,7 +14,11 @@ soc { firmware: firmware { compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + mboxes = <&mailbox>; + dma-ranges; }; power: power { diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index e1abe8c730ce..b83a864e2e8b 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -372,6 +372,7 @@ "dsi0_ddr2", "dsi0_ddr"; + status = "disabled"; }; aux: aux@7e215000 { diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index 3931fb068ff0..91d1018ab75f 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -24,12 +24,12 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &davinci_mdio { diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 9e43d5ec0bb2..79ccdd4470f4 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -33,12 +33,12 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &davinci_mdio { diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index e5e4d0affefa..f7939f43413b 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -362,4 +362,18 @@ #clock-cells = <2>; }; }; + + alwon_ethernet_cm: alwon_ethernet_cm@15d4 { + compatible = "ti,omap4-cm"; + reg = <0x15d4 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x15d4 0x4>; + + alwon_ethernet_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0 0x4>; + #clock-cells = <2>; + }; + }; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 95de9f214c14..44ed5a798164 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -4,6 +4,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/dm814.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/dm814x.h> @@ -519,53 +521,123 @@ reg = <0x47810000 0x1000>; }; - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 3>, <&edma_tptc3 0>; - - ti,edma-memcpy-channels = <20 21>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 3>, <&edma_tptc3 0>; + + ti,edma-memcpy-channels = <20 21>; + }; }; - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <112>; - interrupt-names = "edma3_tcerrint"; + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <113>; - interrupt-names = "edma3_tcerrint"; + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <114>; - interrupt-names = "edma3_tcerrint"; + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc3: tptc@49b00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc3"; - reg = <0x49b00000 0x100000>; - interrupts = <115>; - interrupt-names = "edma3_tcerrint"; + target-module@49b00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49b00000 0x4>, + <0x49b00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49b00000 0x100000>; + + edma_tptc3: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <115>; + interrupt-names = "edma3_tcerrint"; + }; }; /* See TRM "Table 1-318. L4HS Instance Summary" */ @@ -574,57 +646,73 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0x4a000000 0x1b4040>; - }; - /* REVISIT: Move to live under l4hs once driver is fixed */ - mac: ethernet@4a100000 { - compatible = "ti,cpsw"; - ti,hwmods = "cpgmac0"; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; - clock-names = "fck", "cpts"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x80000000>; - cpts_clock_shift = <29>; - reg = <0x4a100000 0x800 - 0x4a100900 0x100>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - /* - * c0_rx_thresh_pend - * c0_rx_pend - * c0_tx_pend - * c0_misc_pend - */ - interrupts = <40 41 42 43>; - ranges; - syscon = <&scm_conf>; - - davinci_mdio: mdio@4a100800 { - compatible = "ti,davinci_mdio"; + target-module@100000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x100900 0x4>, + <0x100908 0x4>, + <0x100904 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - reg = <0x4a100800 0x100>; - }; - - cpsw_emac0: slave@4a100200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 1>; + #size-cells = <1>; + ranges = <0 0x100000 0x8000>; + + mac: ethernet@0 { + compatible = "ti,cpsw"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0 0x800>, + <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges = <0 0 0x8000>; + syscon = <&scm_conf>; + + davinci_mdio: mdio@800 { + compatible = "ti,cpsw-mdio", "ti,davinci_mdio"; + clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x800 0x100>; + }; - }; + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; - cpsw_emac1: slave@4a100300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 2>; + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 1edc2b48b254..2a4934b60ded 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -4,6 +4,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/dm816.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/omap.h> @@ -138,13 +140,123 @@ }; }; - edma: edma@49000000 { - compatible = "ti,edma3"; - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3"; - reg = <0x49000000 0x10000>, - <0x44e10f90 0x40>; - interrupts = <12 13 14>; - #dma-cells = <1>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 3>, <&edma_tptc3 0>; + + ti,edma-memcpy-channels = <20 21>; + }; + }; + + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49b00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49b00000 0x4>, + <0x49b00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49b00000 0x100000>; + + edma_tptc3: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <115>; + interrupt-names = "edma3_tcerrint"; + }; }; elm: elm@48080000 { @@ -185,7 +297,7 @@ #address-cells = <2>; #size-cells = <1>; interrupts = <100>; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; gpmc,num-cs = <6>; gpmc,num-waitpins = <2>; @@ -202,7 +314,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <70>; - dmas = <&edma 58 &edma 59>; + dmas = <&edma 58 0 &edma 59 0>; dma-names = "tx", "rx"; }; @@ -213,7 +325,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <71>; - dmas = <&edma 60 &edma 61>; + dmas = <&edma 60 0 &edma 61 0>; dma-names = "tx", "rx"; }; @@ -311,10 +423,10 @@ interrupts = <65>; ti,spi-num-cs = <4>; ti,hwmods = "mcspi1"; - dmas = <&edma 16 &edma 17 - &edma 18 &edma 19 - &edma 20 &edma 21 - &edma 22 &edma 23>; + dmas = <&edma 16 0 &edma 17 0 + &edma 18 0 &edma 19 0 + &edma 20 0 &edma 21 0 + &edma 22 0 &edma 23 0>; dma-names = "tx0", "rx0", "tx1", "rx1", "tx2", "rx2", "tx3", "rx3"; }; @@ -324,7 +436,7 @@ reg = <0x48060000 0x11000>; ti,hwmods = "mmc1"; interrupts = <64>; - dmas = <&edma 24 &edma 25>; + dmas = <&edma 24 0 &edma 25 0>; dma-names = "tx", "rx"; }; @@ -392,7 +504,7 @@ reg = <0x48020000 0x2000>; clock-frequency = <48000000>; interrupts = <72>; - dmas = <&edma 26 &edma 27>; + dmas = <&edma 26 0 &edma 27 0>; dma-names = "tx", "rx"; }; @@ -402,7 +514,7 @@ reg = <0x48022000 0x2000>; clock-frequency = <48000000>; interrupts = <73>; - dmas = <&edma 28 &edma 29>; + dmas = <&edma 28 0 &edma 29 0>; dma-names = "tx", "rx"; }; @@ -412,7 +524,7 @@ reg = <0x48024000 0x2000>; clock-frequency = <48000000>; interrupts = <74>; - dmas = <&edma 30 &edma 31>; + dmas = <&edma 30 0 &edma 31 0>; dma-names = "tx", "rx"; }; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index 861ab90a3f3a..c16e183822be 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -24,12 +24,12 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &davinci_mdio { diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi index d3cbb4ea35a8..cc4878aaa8ea 100644 --- a/arch/arm/boot/dts/dra62x.dtsi +++ b/arch/arm/boot/dts/dra62x.dtsi @@ -12,12 +12,12 @@ /* Compared to dm814x, dra62x has different offsets for Ethernet */ &mac { - reg = <0x4a100000 0x800 - 0x4a101200 0x100>; + reg = <0 0x800>, + <0x1200 0x100>; }; &davinci_mdio { - reg = <0x4a101000 0x100>; + reg = <0x1000 0x100>; }; #include "dra62x-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 4305051bb769..4740989ed9c4 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -143,11 +143,12 @@ * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ - ocp { + ocp: ocp { compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x0 0x44000000 0x0 0x1000000>, <0x0 0x45000000 0x0 0x1000>; @@ -333,43 +334,73 @@ #pinctrl-cells = <2>; }; - edma: edma@43300000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x43300000 0x100000>; - reg-names = "edma3_cc"; - interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; + target-module@43300000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43300000 0x4>; + reg-names = "rev"; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43300000 0x100000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x100000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>; + + /* + * memcpy is disabled, can be enabled with: + * ti,edma-memcpy-channels = <20 21>; + * for example. Note that these channels need to be + * masked in the xbar as well. + */ + }; + }; - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>; + target-module@43400000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43400000 0x4>; + reg-names = "rev"; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43400000 0x100000>; - /* - * memcpy is disabled, can be enabled with: - * ti,edma-memcpy-channels = <20 21>; - * for example. Note that these channels need to be - * masked in the xbar as well. - */ + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc0: tptc@43400000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x43400000 0x100000>; - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; - }; + target-module@43500000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43500000 0x4>; + reg-names = "rev"; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43500000 0x100000>; - edma_tptc1: tptc@43500000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x43500000 0x100000>; - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; dmm@4e000000 { @@ -707,44 +738,99 @@ ti,irqs-safe-map = <0>; }; - dss: dss@58000000 { - compatible = "ti,dra7-dss"; - /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ - /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ - status = "disabled"; - ti,hwmods = "dss_core"; - /* CTRL_CORE_DSS_PLL_CONTROL */ - syscon-pll-ctrl = <&scm_conf 0x538>; + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; - - dispc@58001000 { - compatible = "ti,dra7-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; - /* CTRL_CORE_SMA_SW_1 */ - syscon-pol = <&scm_conf 0x534>; - }; + ranges = <0 0x58000000 0x800000>; - hdmi: encoder@58060000 { - compatible = "ti,dra7-hdmi"; - reg = <0x58040000 0x200>, - <0x58040200 0x80>, - <0x58040300 0x80>, - <0x58060000 0x19000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + dss: dss@0 { + compatible = "ti,dra7-dss"; + /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ + /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma_xbar 76>; - dma-names = "audio_tx"; + /* CTRL_CORE_DSS_PLL_CONTROL */ + syscon-pll-ctrl = <&scm_conf 0x538>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,dra7-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + /* CTRL_CORE_SMA_SW_1 */ + syscon-pol = <&scm_conf 0x534>; + }; + }; + + target-module@40000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000 0x40000>; + + hdmi: encoder@0 { + compatible = "ti,dra7-hdmi"; + reg = <0 0x200>, + <0x200 0x80>, + <0x300 0x80>, + <0x20000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma_xbar 76>; + dma-names = "audio_tx"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index 82b57a35abc0..da334489b18f 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -60,9 +60,9 @@ }; &dss { - reg = <0x58000000 0x80>, - <0x58004054 0x4>, - <0x58004300 0x20>; + reg = <0 0x80>, + <0x4054 0x4>, + <0x4300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1"; clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>, diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index c5abc436ca1f..7b1c61298253 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -132,11 +132,11 @@ }; &dss { - reg = <0x58000000 0x80>, - <0x58004054 0x4>, - <0x58004300 0x20>, - <0x58009054 0x4>, - <0x58009300 0x20>; + reg = <0 0x80>, + <0x4054 0x4>, + <0x4300 0x20>, + <0x9054 0x4>, + <0x9300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2"; diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 5651ae6dc969..f6eb71553b95 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -13,7 +13,6 @@ compatible = "calxeda,ecx-2000"; #address-cells = <2>; #size-cells = <2>; - clock-ranges; cpus { #address-cells = <1>; @@ -83,8 +82,7 @@ intc: interrupt-controller@fff11000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; + #address-cells = <0>; interrupt-controller; interrupts = <1 9 0xf04>; reg = <0xfff11000 0x1000>, @@ -95,7 +93,7 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>; }; }; }; diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi index 66ee1d34f72b..57a028a69373 100644 --- a/arch/arm/boot/dts/ecx-common.dtsi +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -27,10 +27,11 @@ reg = <0xffe08000 0x10000>; interrupts = <0 83 4>; dma-coherent; - calxeda,port-phys = <&combophy5 0 &combophy0 0 - &combophy0 1 &combophy0 2 - &combophy0 3>; - calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; + calxeda,port-phys = < &combophy5 0>, <&combophy0 0>, + <&combophy0 1>, <&combophy0 2>, + <&combophy0 3>; + calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, + <&gpioh 7 1>; calxeda,led-order = <4 0 1 2 3>; }; @@ -114,8 +115,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xfff36000 0x1000>; interrupts = <0 20 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; + clocks = <&pclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; smic@fff3a000 { @@ -202,14 +203,14 @@ ethernet@fff50000 { compatible = "calxeda,hb-xgmac"; reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; + interrupts = <0 77 4>, <0 78 4>, <0 79 4>; dma-coherent; }; ethernet@fff51000 { compatible = "calxeda,hb-xgmac"; reg = <0xfff51000 0x1000>; - interrupts = <0 80 4 0 81 4 0 82 4>; + interrupts = <0 80 4>, <0 81 4>, <0 82 4>; dma-coherent; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index dee35e3a5c4b..b27a82072365 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -23,7 +23,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x1ff00000>; + reg = <0x40000000 0x1f800000>; }; firmware@205f000 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index a1bdf7830a87..9dda6bdb9253 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -115,7 +115,7 @@ gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; - cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; lcd@0 { compatible = "samsung,ld9040"; @@ -124,8 +124,6 @@ vci-supply = <&ldo17_reg>; reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; spi-max-frequency = <1200000>; - spi-cpol; - spi-cpha; power-on-delay = <10>; reset-delay = <10>; panel-width-mm = <90>; diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 31719c079d67..44f97546dd0a 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -33,7 +33,7 @@ }; }; - lcd_vdd3_reg: voltage-regulator-6 { + lcd_vdd3_reg: voltage-regulator-7 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; @@ -42,7 +42,7 @@ enable-active-high; }; - ps_als_reg: voltage-regulator-7 { + ps_als_reg: voltage-regulator-8 { compatible = "regulator-fixed"; regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index 98cd1284cd90..4189e1fb204c 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -13,7 +13,7 @@ /* bootargs are passed in by bootloader */ - cam_vdda_reg: voltage-regulator-6 { + cam_vdda_reg: voltage-regulator-7 { compatible = "regulator-fixed"; regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 9c39e82e4ecb..73d6a71da88d 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -165,6 +165,15 @@ cpu0-supply = <&buck2_reg>; }; +&cpu0_opp_table { + opp-1000000000 { + opp-suspend; + }; + opp-800000000 { + /delete-property/opp-suspend; + }; +}; + &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index f8ebc620f42d..6904091d4837 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -93,22 +93,23 @@ compatible = "regulator-fixed"; reg = <0>; regulator-name = "MAIN_DC"; + regulator-always-on; }; mmc_reg: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "VDD_33ON_2.8V"; + regulator-name = "VDD_MMC"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-always-on; }; reg_hdmi_en: regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "hdmi-en"; + regulator-always-on; }; vcc_1v2_reg: regulator@3 { @@ -117,6 +118,7 @@ regulator-name = "VCC_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-always-on; }; vcc_1v8_reg: regulator@4 { @@ -125,6 +127,7 @@ regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; vcc_3v3_reg: regulator@5 { @@ -133,6 +136,7 @@ regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index ee28d30f5476..e9a09dd0a49b 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -584,6 +584,7 @@ regulator-name = "PVDD_G3DS_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; + regulator-always-on; regulator-state-mem { regulator-on-in-suspend; @@ -697,6 +698,7 @@ regulator-name = "PVDD_G3D_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; + regulator-always-on; regulator-state-mem { regulator-off-in-suspend; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index 1b8605cf2407..4b641b9b8179 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -31,6 +31,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu1: cpu@101 { @@ -43,6 +44,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu2: cpu@102 { @@ -55,6 +57,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu3: cpu@103 { @@ -67,6 +70,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu4: cpu@0 { @@ -79,6 +83,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; cpu5: cpu@1 { @@ -91,6 +96,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; cpu6: cpu@2 { @@ -103,6 +109,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; cpu7: cpu@3 { @@ -115,6 +122,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 5cf1aed20490..ab27ff8bc3dc 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -901,6 +901,7 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; + regulator-always-on; regulator-state-mem { regulator-off-in-suspend; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index f163206265bb..812659260278 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -215,6 +215,36 @@ }; }; }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu 0>; + trips { + gpu_alert0: gpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + gpu_alert1: gpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + gpu_crit0: gpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu 0 2>; + }; + map1 { + trip = <&gpu_alert1>; + cooling-device = <&gpu 3 6>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 1865a708b49f..5da2d81e3be2 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -357,6 +357,65 @@ }; }; }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + gpu_alert0: gpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_alert1: gpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_alert2: gpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_crit0: gpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + gpu_alert3: gpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + gpu_alert4: gpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&gpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&gpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&gpu_alert3>; + cooling-device = <&gpu 0 2>; + }; + map4 { + trip = <&gpu_alert4>; + cooling-device = <&gpu 3 6>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index e2030ba16512..cc39289e99dd 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -119,13 +119,11 @@ /* * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM. - * Since the platform has no temperature sensor, this is controlled - * from userspace by using the hard disks S.M.A.R.T. temperature * sensor. It is turned on when the temperature exceeds 46 degrees * and turned off when the temperatures goes below 41 degrees * (celsius). */ - gpio-fan { + fan0: gpio-fan { compatible = "gpio-fan"; /* Collides with IDE */ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; @@ -133,6 +131,40 @@ #cooling-cells = <2>; }; + thermal-zones { + chassis-thermal { + /* Poll every 20 seconds */ + polling-delay = <20000>; + /* Poll every 2nd second when cooling */ + polling-delay-passive = <2000>; + /* Use the thermal sensor in the hard drive */ + thermal-sensors = <&drive0>; + + /* Tripping points from the fan.script in the rootfs */ + trips { + alert: chassis-alert { + /* At 43 degrees turn on the fan */ + temperature = <43000>; + hysteresis = <3000>; + type = "active"; + }; + crit: chassis-crit { + /* Just shut down at 60 degrees */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert>; + cooling-device = <&fan0 1 1>; + }; + }; + }; + }; + /* * The touchpad input is connected to a GPIO bit-banged * I2C bus. @@ -443,8 +475,18 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; + + /* + * This drive may have a temperature sensor with a + * thermal zone we can use for thermal control of the + * chassis temperature using the fan. + */ + drive0: ide-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; }; display-controller@6a000000 { diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index 360642a02a48..c6f3d90e3e90 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -297,7 +297,7 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 521714f38eed..43c45f7e1e0a 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -170,11 +170,11 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; - ata@63400000 { + ide@63400000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index a98af0351906..a0916d3c1059 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -293,11 +293,11 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; - ata@63400000 { + ide@63400000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 239dfacaae4d..0c6e6d35bfaa 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -289,7 +289,7 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 8cf67b11751f..065ed10a79fa 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -356,7 +356,7 @@ }; }; - ata@63000000 { + ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; @@ -365,9 +365,11 @@ clock-names = "PCLK"; sata = <&sata>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; - ata@63400000 { + ide@63400000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; @@ -376,6 +378,8 @@ clock-names = "PCLK"; sata = <&sata>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; dma-controller@67000000 { diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index f4e4dca6f7e7..b6b0225a769e 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -13,7 +13,6 @@ compatible = "calxeda,highbank"; #address-cells = <1>; #size-cells = <1>; - clock-ranges; cpus { #address-cells = <1>; @@ -96,7 +95,7 @@ }; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x00000000 0xff900000>; @@ -128,14 +127,12 @@ intc: interrupt-controller@fff11000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; interrupt-controller; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xfff12000 0x1000>; interrupts = <0 70 4>; @@ -145,14 +142,14 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>; }; sregs@fff3c200 { compatible = "calxeda,hb-sregs-l2-ecc"; reg = <0xfff3c200 0x100>; - interrupts = <0 71 4 0 72 4>; + interrupts = <0 71 4>, <0 72 4>; }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 4c9aafe00b5d..0729e72f2283 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -23,7 +23,7 @@ ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; bus-width = <4>; broken-cd; status = "okay"; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 8257630f7a49..c5edff381213 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -267,6 +267,14 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc0_sck_cfg: mmc0-sck-cfg@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_SCK__SSP1_SCK + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + mmc1_4bit_pins_a: mmc1-4bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -422,7 +430,7 @@ clocks = <&clks 16>; }; - dcp@80028000 { + dcp: crypto@80028000 { compatible = "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <53 54>; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index f4516ccf2c1a..111bfdcbe552 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -82,6 +82,7 @@ #define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x00 0x000 #define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x04 0x000 #define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x05 0x000 +#define MX25_PAD_EB0__CSPI3_SS0 0x040 0x258 0x4bc 0x06 0x000 #define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000 #define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000 @@ -102,11 +103,13 @@ #define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000 #define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x03 0x000 #define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x05 0x000 +#define MX25_PAD_CS4__CSPI3_MOSI 0x054 0x264 0x4b8 0x06 0x000 #define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x00 0x000 #define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000 #define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x03 0x000 #define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x05 0x000 +#define MX25_PAD_CS5__CSPI3_MISO 0x058 0x268 0x4b4 0x06 0x000 #define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000 #define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000 @@ -114,6 +117,7 @@ #define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000 #define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x03 0x000 #define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x05 0x000 +#define MX25_PAD_ECB__CSPI3_SCLK 0x060 0x270 0x4ac 0x06 0x000 #define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000 #define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000 @@ -251,10 +255,12 @@ #define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000 #define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000 +#define MX25_PAD_LD12__KPP_ROW6 0x0f8 0x2f0 0x544 0x04 0x000 #define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x05 0x001 #define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x00 0x000 #define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000 +#define MX25_PAD_LD13__KPP_ROW7 0x0fc 0x2f4 0x548 0x04 0x000 #define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x05 0x000 #define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x00 0x000 @@ -512,9 +518,11 @@ #define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x00 0x000 #define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x05 0x000 +#define MX25_PAD_FEC_TX_EN__KPP_ROW4 0x1d8 0x3d0 0x53c 0x06 0x000 #define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x00 0x000 #define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x05 0x000 +#define MX25_PAD_FEC_RDATA0__KPP_ROW5 0x1dc 0x3d4 0x540 0x06 0x000 #define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x00 0x000 /* diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 40b95a290bd6..1123e683025c 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -75,7 +75,7 @@ interrupt-parent = <&asic>; ranges; - aips@43f00000 { /* AIPS1 */ + bus@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -332,7 +332,7 @@ }; }; - aips@53f00000 { /* AIPS2 */ + bus@53f00000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index f3464cf52e49..002cd223f22d 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -525,7 +525,7 @@ reg = <0x10024600 0x200>; }; - sahara2: sahara@10025000 { + sahara2: crypto@10025000 { compatible = "fsl,imx27-sahara"; reg = <0x10025000 0x1000>; interrupts = <59>; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 3a184d13887b..c5acc19c982d 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -183,10 +183,20 @@ pinctrl-0 = <&auart2_2pins_a>; status = "okay"; }; + + usbphy1: usbphy@8007e000 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; + }; }; }; ahb@80080000 { + usb1: usb@80090000 { + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e14d8ef0158b..a1cbbeb39a4f 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -998,7 +998,7 @@ clocks = <&clks 26>; }; - dcp: dcp@80028000 { + dcp: crypto@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53 54>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 6b62f0745b82..18270ec648fe 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -63,7 +63,7 @@ ranges = <0 0x1fffc000 0x4000>; }; - aips@43f00000 { /* AIPS1 */ + bus@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -225,7 +225,7 @@ }; }; - aips@53f00000 { /* AIPS2 */ + bus@53f00000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 9cbdc1a15cda..2ebf2c1fa682 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -66,7 +66,7 @@ cache-level = <2>; }; - aips1: aips@43f00000 { + aips1: bus@43f00000 { compatible = "fsl,aips", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -199,7 +199,7 @@ }; }; - aips2: aips@53f00000 { + aips2: bus@53f00000 { compatible = "fsl,aips", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 0bfe7c91d0eb..d325658901c5 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -101,7 +101,7 @@ interrupt-parent = <&tzic>; ranges; - aips@50000000 { /* AIPS1 */ + bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -389,7 +389,7 @@ }; }; - aips@60000000 { /* AIPS2 */ + bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 3596060f52e7..e559ab0c3645 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -217,8 +217,8 @@ simple-audio-card,widgets = "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Headphone Jack", "HPLEFT", - "Headphone Jack", "HPRIGHT"; + "Headphone Jack", "TPA6130A2 HPLEFT", + "Headphone Jack", "TPA6130A2 HPRIGHT"; simple-audio-card,aux-devs = <&hpa1>; sound_cpu: simple-audio-card,cpu { @@ -470,6 +470,7 @@ compatible = "ti,tpa6130a2"; reg = <0x60>; Vdd-supply = <®_3p3v>; + sound-name-prefix = "TPA6130A2"; }; ds1341: rtc@68 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index dea86b98e9c3..92fbb90bec57 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -104,6 +104,11 @@ #phy-cells = <0>; }; + capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu_csi0>, <&ipu_csi1>; + }; + display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu_di0>, <&ipu_di1>; @@ -143,6 +148,14 @@ clock-names = "bus", "di0", "di1"; resets = <&src 2>; + ipu_csi0: port@0 { + reg = <0>; + }; + + ipu_csi1: port@1 { + reg = <1>; + }; + ipu_di0: port@2 { reg = <2>; @@ -158,7 +171,7 @@ }; }; - aips@70000000 { /* AIPS1 */ + bus@70000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -440,7 +453,7 @@ }; }; - aips@80000000 { /* AIPS2 */ + bus@80000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index ed341cfd9d09..8536f59f59e6 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -222,7 +222,7 @@ clock-names = "core_clk", "mem_iface_clk"; }; - aips@50000000 { /* AIPS1 */ + bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -654,7 +654,7 @@ }; }; - aips@60000000 { /* AIPS2 */ + bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 84fcc203a2e4..65359aece950 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2016 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts new file mode 100644 index 000000000000..659a8e8714ea --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts new file mode 100644 index 000000000000..d7403c5c4337 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-hobbit.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/imx6dl-pico-nymph.dts new file mode 100644 index 000000000000..b282dbf953aa --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pico-nymph.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/imx6dl-pico-pi.dts new file mode 100644 index 000000000000..b7b1c07f96f3 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pico-pi.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 829654e1835a..065d3ab0f50a 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -89,11 +89,25 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + phy-handle = <&rgmii_phy>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8035 PHY */ + rgmii_phy: ethernet-phy@4 { + reg = <4>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; + }; }; &gpio1 { diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 80ed5f16a76e..2b9423d55c37 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -562,6 +562,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; status = "disabled"; }; @@ -569,6 +570,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; srp-disable; hnp-disable; adp-disable; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 008312ee0c31..77b65a402e19 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -44,6 +44,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu@1 { @@ -85,8 +87,8 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips1: aips-bus@2000000 { - iomuxc: iomuxc@20e0000 { + aips1: bus@2000000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6dl-iomuxc"; }; @@ -101,7 +103,7 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { i2c4: i2c@21f8000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 4665e15b196d..fab83abb6466 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index a3fa04a97d81..1614b1ae501d 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 5ba49d0f4880..fa9f98dd15ac 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index 84b30bd6908f..05ee28388229 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -111,8 +111,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + phy-handle = <&rgmii_phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8035 PHY */ + rgmii_phy: ethernet-phy@4 { + reg = <4>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; + }; }; &hdmi { diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 61347a545d6c..69f170ff31c5 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -107,7 +107,7 @@ }; panel: panel { - compatible = "innolux,n133hse-ea1", "simple-panel"; + compatible = "innolux,n133hse-ea1"; backlight = <&backlight>; }; diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/imx6q-pico-dwarf.dts new file mode 100644 index 000000000000..618d2743e1e9 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pico-dwarf.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/imx6q-pico-hobbit.dts new file mode 100644 index 000000000000..7a666507b456 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pico-hobbit.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-hobbit.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/imx6q-pico-nymph.dts new file mode 100644 index 000000000000..fe5a7becc9e5 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pico-nymph.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/imx6q-pico-pi.dts new file mode 100644 index 000000000000..9413f0a68f54 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pico-pi.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and PI baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 9d3be1cc6b64..78a4d64929f3 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -49,6 +49,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu1: cpu@1 { @@ -164,7 +166,7 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@2000000 { /* AIPS1 */ + bus@2000000 { /* AIPS1 */ spba-bus@2000000 { ecspi5: spi@2018000 { #address-cells = <1>; @@ -181,7 +183,7 @@ }; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6q-iomuxc"; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 1b5bc6b5e806..e34be8fabd93 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -180,7 +144,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy>; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index d03dff23863d..6e3c6b4925a7 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2016 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 1a9a9d98f284..60563ff0b7ce 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -313,6 +313,11 @@ interrupts = <12 2>; wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; + + accel@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + }; }; &ldb { diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 54b2beadd7a2..8942bec65c5c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -304,6 +304,11 @@ interrupts = <11 2>; wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; + + accel@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + }; }; &ldb { diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 1b6c1331c220..c40583dbd96d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -361,6 +361,11 @@ interrupts = <12 2>; wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; + + accel@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + }; }; &ldb { diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index a1066897be18..ee85031c3916 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -173,6 +173,25 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + }; + + imu@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + st,drdy-int-pin = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio7>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + }; + ltc3676: pmic@3c { compatible = "lltc,ltc3676"; reg = <0x3c>; @@ -426,6 +445,12 @@ >; }; + pinctrl_imu: imugrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + >; + }; + pinctrl_ipu1_csi0: ipu1csi0grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 @@ -449,6 +474,12 @@ >; }; + pinctrl_mag: maggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index be1af7482f89..30fe47ff64a4 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -220,6 +220,14 @@ status = "okay"; }; +/* cc1352 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + /* Sterling-LWB Bluetooth */ &uart4 { pinctrl-names = "default"; @@ -411,6 +419,23 @@ >; }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */ + MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */ + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */ + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */ + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */ + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */ + >; + }; + pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 4d18952658f8..41ebe4599e43 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -88,7 +88,7 @@ reg = <0x50>; }; - pmic@58 { + pmic: pmic@58 { compatible = "dlg,da9062"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; @@ -96,6 +96,8 @@ interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + gpio-controller; + #gpio-cells = <2>; da9062_rtc: rtc { compatible = "dlg,da9062-rtc"; @@ -107,12 +109,13 @@ watchdog { compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; }; regulators { vdd_arm: buck1 { regulator-name = "vdd_arm"; - regulator-min-microvolt = <730000>; + regulator-min-microvolt = <925000>; regulator-max-microvolt = <1380000>; regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-always-on; @@ -120,7 +123,7 @@ vdd_soc: buck2 { regulator-name = "vdd_soc"; - regulator-min-microvolt = <730000>; + regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1380000>; regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-always-on; diff --git a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi new file mode 100644 index 000000000000..3a968782e854 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2017 NXP + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&i2c1 { + mpl3115@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; + +&i2c2 { + io-expander@25 { + compatible = "nxp,pca9554"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi new file mode 100644 index 000000000000..144c4727fbc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2017 NXP + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&i2c2 { + status = "okay"; + + adc081c: adc@50 { + compatible = "ti,adc081c"; + reg = <0x50>; + vref-supply = <®_3p3v>; + }; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi new file mode 100644 index 000000000000..3d56a4216448 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&i2c1 { + adc@52 { + compatible = "ti,adc081c"; + reg = <0x52>; + vref-supply = <®_2p5v>; + }; +}; + +&i2c2 { + io-expander@25 { + compatible = "nxp,pca9554"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; +}; + +&i2c3 { + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&pcie { + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi new file mode 100644 index 000000000000..b823dce62e63 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2017 NXP + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&hdmi { + status = "disabled"; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi new file mode 100644 index 000000000000..39dfd90c2c6b --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi @@ -0,0 +1,617 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_1p5v: regulator-1p5v { + compatible = "regulator-fixed"; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reg_2p8v: regulator-2p8v { + compatible = "regulator-fixed"; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; + + codec_osc: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6-pico-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 50000 0>; + brightness-levels = <0 36 72 108 144 180 216 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel { + compatible = "vxt,vl050-8048nt-c01"; + backlight = <&backlight>; + power-supply = <®_lcd_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&codec_osc>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_1p8v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio5>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + wakeup-source; + }; + + camera@3c { + compatible = "ovti,ov5645"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5645>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "xclk"; + clock-frequency = <24000000>; + vdddo-supply = <®_1p8v>; + vdda-supply = <®_2p8v>; + vddd-supply = <®_1p5v>; + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + + port { + ov5645_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5645_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reset>; + reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { /* Bluetooth module */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc2 { /* Wifi/BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + keep-power-in-suspend; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x4001b0b5 /* PICO_P24 */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x4001b0b5 /* PICO_P26 */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b5 /* PICO_P28 */ + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b0b5 /* PICO_P30 */ + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b0b5 /* PICO_P32 */ + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x4001b0b5 /* PICO_P34 */ + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x4001b0b5 /* PICO_P42 */ + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x4001b0b5 /* PICO_P44 */ + MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x4001b0b5 /* PICO_P48 */ + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x000f0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x1b0b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x1b0b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x1b0b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000f0b0 + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x000f0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1f0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ov5645: ov5645grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + >; + }; + + pinctrl_pcie_reset: pciegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x130b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_lcd: reglcdgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usbotg_vbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x17071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi index 44a97ba93a95..352ac585ca6b 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi @@ -153,6 +153,7 @@ bus-width = <4>; keep-power-in-suspend; mmc-pwrseq = <&pwrseq_ti_wifi>; + cap-power-off-card; non-removable; vmmc-supply = <&vcc_3v3>; /* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */ diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 0075637f9b0b..20350e803377 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -216,6 +216,13 @@ }; }; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + &cpu0 { fsl,soc-operating-points = < /* ARM kHz SOC-PU uV */ diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e6b4b8525f98..98da446aa0f2 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -294,7 +294,7 @@ status = "disabled"; }; - aips-bus@2000000 { /* AIPS1 */ + bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -574,7 +574,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -661,7 +661,7 @@ #interrupt-cells = <2>; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -669,14 +669,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_IPG>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -684,7 +684,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -908,7 +908,7 @@ }; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; reg = <0x20e0000 0x4000>; }; @@ -935,14 +935,14 @@ }; }; - aips-bus@2100000 { /* AIPS2 */ + bus@2100000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - crypto: caam@2100000 { + crypto: crypto@2100000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -954,13 +954,13 @@ <&clks IMX6QDL_CLK_EIM_SLOW>; clock-names = "mem", "aclk", "ipg", "emi_slow"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -1039,13 +1039,13 @@ compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupt-names = "int0", "pps"; - interrupts-extended = - <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>, + <0 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp"; + gpr = <&gpr>; status = "disabled"; }; @@ -1161,10 +1161,16 @@ status = "disabled"; }; - ocotp: ocotp@21bc000 { + ocotp: ocotp-ctrl@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; tzasc@21d0000 { /* TZASC1 */ diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 5f51f8e5c1fa..b310f13a53f2 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -18,7 +18,7 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@2100000 { + bus@2100000 { pre1: pre@21c8000 { compatible = "fsl,imx6qp-pre"; reg = <0x021c8000 0x1000>; @@ -77,7 +77,6 @@ }; &fec { - /delete-property/interrupts-extended; interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>, <0 119 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 59c54e6ad09a..8230b45057a1 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -74,6 +74,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -143,7 +145,7 @@ arm,data-latency = <4 2 3>; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -380,7 +382,7 @@ clock-names = "ipg", "per"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sl-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -491,7 +493,7 @@ <&iomuxc 21 161 1>; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -499,14 +501,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_IPG>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -514,7 +516,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6sl-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -728,7 +730,7 @@ reg = <0x020e0000 0x38>; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6sl-iomuxc"; reg = <0x020e0000 0x4000>; }; @@ -777,7 +779,7 @@ power-domains = <&pd_disp>; }; - dcp: dcp@20fc000 { + dcp: crypto@20fc000 { compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, @@ -786,7 +788,7 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -949,10 +951,16 @@ status = "disabled"; }; - ocotp: ocotp@21bc000 { + ocotp: ocotp-ctrl@21bc000 { compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SL_CLK_OCOTP>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; audmux: audmux@21d8000 { diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index a1bc5bb31756..edd3abb9a9f1 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -72,6 +72,8 @@ <&clks IMX6SLL_CLK_PLL1_SYS>; clock-names = "arm", "pll2_pfd2_396m", "step", "pll1_sw", "pll1_sys"; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -144,7 +146,7 @@ arm,data-latency = <4 2 3>; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -652,7 +654,7 @@ status = "disabled"; }; - dcp: dcp@20fc000 { + dcp: crypto@20fc000 { compatible = "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, @@ -663,7 +665,7 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -791,6 +793,10 @@ reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SLL_CLK_OCOTP>; + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + tempmon_calib: calib@38 { reg = <0x38 4>; }; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 832b5c5d7441..d84ea6999377 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -484,31 +484,31 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1 >; }; pinctrl_uart3: uart3grp { fsl,pins = < - MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1 - MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1 + MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX 0x1b0b1 + MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < - MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 - MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1 - MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1 + MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x1b0b1 + MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index aa194a2fdd53..0b02c7e60c17 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -42,8 +42,8 @@ #define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3 0x0020 0x0368 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP 0x0020 0x0368 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO03__PHY_TCK 0x0020 0x0368 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO04__UART1_RX 0x0024 0x036C 0x0830 0x0 0x0 -#define MX6SX_PAD_GPIO1_IO04__UART1_TX 0x0024 0x036C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x0024 0x036C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX 0x0024 0x036C 0x0830 0x0 0x0 #define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B 0x0024 0x036C 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO04__ENET1_MDC 0x0024 0x036C 0x0000 0x2 0x0 #define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT 0x0024 0x036C 0x0000 0x3 0x0 @@ -51,8 +51,8 @@ #define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4 0x0024 0x036C 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP 0x0024 0x036C 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO04__PHY_TMS 0x0024 0x036C 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO05__UART1_RX 0x0028 0x0370 0x0830 0x0 0x1 -#define MX6SX_PAD_GPIO1_IO05__UART1_TX 0x0028 0x0370 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x0028 0x0370 0x0830 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX 0x0028 0x0370 0x0000 0x0 0x0 #define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT 0x0028 0x0370 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO 0x0028 0x0370 0x0764 0x2 0x0 #define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK 0x0028 0x0370 0x0000 0x3 0x0 @@ -60,21 +60,23 @@ #define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5 0x0028 0x0370 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK 0x0028 0x0370 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO05__PHY_TDO 0x0028 0x0370 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO06__UART2_RX 0x002C 0x0374 0x0838 0x0 0x0 -#define MX6SX_PAD_GPIO1_IO06__UART2_TX 0x002C 0x0374 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x002C 0x0374 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX 0x002C 0x0374 0x0838 0x0 0x0 #define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B 0x002C 0x0374 0x086C 0x1 0x1 #define MX6SX_PAD_GPIO1_IO06__ENET2_MDC 0x002C 0x0374 0x0000 0x2 0x0 #define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK 0x002C 0x0374 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B 0x002C 0x0374 0x082C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS 0x002C 0x0374 0x082C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART1_DTE_CTS 0x002C 0x0374 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6 0x002C 0x0374 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET 0x002C 0x0374 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x002C 0x0374 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART2_RX 0x0030 0x0378 0x0838 0x0 0x1 -#define MX6SX_PAD_GPIO1_IO07__UART2_TX 0x0030 0x0378 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x0030 0x0378 0x0838 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX 0x0030 0x0378 0x0000 0x0 0x0 #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS 0x0030 0x0378 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART1_DTE_RTS 0x0030 0x0378 0x082C 0x4 0x1 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -83,7 +85,8 @@ #define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0034 0x037C 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0 0x0034 0x037C 0x081C 0x2 0x0 #define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x0034 0x037C 0x069C 0x3 0x1 -#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B 0x0034 0x037C 0x0834 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS 0x0034 0x037C 0x0834 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO08__UART2_DTE_CTS 0x0034 0x037C 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x0034 0x037C 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET 0x0034 0x037C 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT 0x0034 0x037C 0x0000 0x7 0x0 @@ -92,7 +95,8 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS 0x0038 0x0380 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO09__UART2_DTE_RTS 0x0038 0x0380 0x0834 0x4 0x1 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -177,8 +181,8 @@ #define MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x005C 0x03A4 0x0794 0x1 0x1 #define MX6SX_PAD_CSI_DATA04__SPDIF_OUT 0x005C 0x03A4 0x0000 0x2 0x0 #define MX6SX_PAD_CSI_DATA04__KPP_COL_6 0x005C 0x03A4 0x07CC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA04__UART6_RX 0x005C 0x03A4 0x0858 0x4 0x0 -#define MX6SX_PAD_CSI_DATA04__UART6_TX 0x005C 0x03A4 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_DCE_RX 0x005C 0x03A4 0x0858 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_DTE_TX 0x005C 0x03A4 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x005C 0x03A4 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19 0x005C 0x03A4 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA04__PWM5_OUT 0x005C 0x03A4 0x0000 0x7 0x0 @@ -188,8 +192,8 @@ #define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x0060 0x03A8 0x07A0 0x1 0x1 #define MX6SX_PAD_CSI_DATA05__SPDIF_IN 0x0060 0x03A8 0x0824 0x2 0x1 #define MX6SX_PAD_CSI_DATA05__KPP_ROW_6 0x0060 0x03A8 0x07D8 0x3 0x0 -#define MX6SX_PAD_CSI_DATA05__UART6_RX 0x0060 0x03A8 0x0858 0x4 0x1 -#define MX6SX_PAD_CSI_DATA05__UART6_TX 0x0060 0x03A8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA05__UART6_DCE_TX 0x0060 0x03A8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA05__UART6_DTE_RX 0x0060 0x03A8 0x0858 0x4 0x1 #define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x0060 0x03A8 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18 0x0060 0x03A8 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA05__PWM6_OUT 0x0060 0x03A8 0x0000 0x7 0x0 @@ -199,7 +203,8 @@ #define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x0064 0x03AC 0x0798 0x1 0x1 #define MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x0064 0x03AC 0x07C0 0x2 0x2 #define MX6SX_PAD_CSI_DATA06__KPP_COL_7 0x0064 0x03AC 0x07D0 0x3 0x0 -#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x0064 0x03AC 0x0854 0x4 0x0 +#define MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS 0x0064 0x03AC 0x0854 0x4 0x0 +#define MX6SX_PAD_CSI_DATA06__UART6_DTE_CTS 0x0064 0x03AC 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20 0x0064 0x03AC 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17 0x0064 0x03AC 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA06__DCIC2_OUT 0x0064 0x03AC 0x0000 0x7 0x0 @@ -209,7 +214,8 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS 0x0068 0x03B0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA07__UART6_DTE_RTS 0x0068 0x03B0 0x0854 0x4 0x1 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -218,7 +224,8 @@ #define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC 0x006C 0x03B4 0x0700 0x0 0x0 #define MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x006C 0x03B4 0x0790 0x1 0x1 #define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x006C 0x03B4 0x0678 0x2 0x1 -#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B 0x006C 0x03B4 0x0844 0x3 0x2 +#define MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS 0x006C 0x03B4 0x0844 0x3 0x2 +#define MX6SX_PAD_CSI_HSYNC__UART4_DTE_CTS 0x006C 0x03B4 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_HSYNC__MQS_LEFT 0x006C 0x03B4 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22 0x006C 0x03B4 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25 0x006C 0x03B4 0x0000 0x6 0x0 @@ -228,8 +235,8 @@ #define MX6SX_PAD_CSI_MCLK__CSI1_MCLK 0x0070 0x03B8 0x0000 0x0 0x0 #define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK 0x0070 0x03B8 0x0784 0x1 0x1 #define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x0070 0x03B8 0x0000 0x2 0x0 -#define MX6SX_PAD_CSI_MCLK__UART4_RX 0x0070 0x03B8 0x0848 0x3 0x2 -#define MX6SX_PAD_CSI_MCLK__UART4_TX 0x0070 0x03B8 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_MCLK__UART4_DCE_RX 0x0070 0x03B8 0x0848 0x3 0x2 +#define MX6SX_PAD_CSI_MCLK__UART4_DTE_TX 0x0070 0x03B8 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT 0x0070 0x03B8 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23 0x0070 0x03B8 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26 0x0070 0x03B8 0x0000 0x6 0x0 @@ -239,8 +246,8 @@ #define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK 0x0074 0x03BC 0x0704 0x0 0x0 #define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK 0x0074 0x03BC 0x0780 0x1 0x1 #define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x0074 0x03BC 0x0000 0x2 0x0 -#define MX6SX_PAD_CSI_PIXCLK__UART4_RX 0x0074 0x03BC 0x0848 0x3 0x3 -#define MX6SX_PAD_CSI_PIXCLK__UART4_TX 0x0074 0x03BC 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX 0x0074 0x03BC 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX 0x0074 0x03BC 0x0848 0x3 0x3 #define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT 0x0074 0x03BC 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x0074 0x03BC 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27 0x0074 0x03BC 0x0000 0x6 0x0 @@ -250,7 +257,8 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS 0x0078 0x03C0 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_VSYNC__UART4_DTE_RTS 0x0078 0x03C0 0x0844 0x3 0x3 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -330,8 +338,8 @@ #define MX6SX_PAD_ENET2_COL__ENET2_COL 0x0094 0x03DC 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_COL__ENET1_MDC 0x0094 0x03DC 0x0000 0x1 0x0 #define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC 0x0094 0x03DC 0x064C 0x2 0x1 -#define MX6SX_PAD_ENET2_COL__UART1_RX 0x0094 0x03DC 0x0830 0x3 0x2 -#define MX6SX_PAD_ENET2_COL__UART1_TX 0x0094 0x03DC 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_COL__UART1_DCE_RX 0x0094 0x03DC 0x0830 0x3 0x2 +#define MX6SX_PAD_ENET2_COL__UART1_DTE_TX 0x0094 0x03DC 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_COL__SPDIF_IN 0x0094 0x03DC 0x0824 0x4 0x3 #define MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x0094 0x03DC 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID 0x0094 0x03DC 0x0624 0x6 0x1 @@ -341,8 +349,8 @@ #define MX6SX_PAD_ENET2_CRS__ENET2_CRS 0x0098 0x03E0 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_CRS__ENET1_MDIO 0x0098 0x03E0 0x0764 0x1 0x2 #define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS 0x0098 0x03E0 0x0650 0x2 0x1 -#define MX6SX_PAD_ENET2_CRS__UART1_RX 0x0098 0x03E0 0x0830 0x3 0x3 -#define MX6SX_PAD_ENET2_CRS__UART1_TX 0x0098 0x03E0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_CRS__UART1_DCE_TX 0x0098 0x03E0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_CRS__UART1_DTE_RX 0x0098 0x03E0 0x0830 0x3 0x3 #define MX6SX_PAD_ENET2_CRS__MLB_SIG 0x0098 0x03E0 0x07F0 0x4 0x1 #define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x0098 0x03E0 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID 0x0098 0x03E0 0x0628 0x6 0x1 @@ -352,7 +360,8 @@ #define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK 0x009C 0x03E4 0x0774 0x0 0x0 #define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x009C 0x03E4 0x0000 0x1 0x0 #define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL 0x009C 0x03E4 0x07B8 0x2 0x1 -#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B 0x009C 0x03E4 0x082C 0x3 0x2 +#define MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS 0x009C 0x03E4 0x082C 0x3 0x2 +#define MX6SX_PAD_ENET2_RX_CLK__UART1_DTE_CTS 0x009C 0x03E4 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA 0x009C 0x03E4 0x07EC 0x4 0x1 #define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0x009C 0x03E4 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC 0x009C 0x03E4 0x085C 0x6 0x1 @@ -362,7 +371,8 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS 0x00A0 0x03E8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_DTE_RTS 0x00A0 0x03E8 0x082C 0x3 0x3 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -371,7 +381,8 @@ #define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24 0x00A0 0x03E8 0x0000 0x9 0x0 #define MX6SX_PAD_KEY_COL0__KPP_COL_0 0x00A4 0x03EC 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL0__USDHC3_CD_B 0x00A4 0x03EC 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_COL0__UART6_RTS_B 0x00A4 0x03EC 0x0854 0x2 0x2 +#define MX6SX_PAD_KEY_COL0__UART6_DCE_RTS 0x00A4 0x03EC 0x0854 0x2 0x2 +#define MX6SX_PAD_KEY_COL0__UART6_DTE_CTS 0x00A4 0x03EC 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x00A4 0x03EC 0x0710 0x3 0x0 #define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x00A4 0x03EC 0x066C 0x4 0x0 #define MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x00A4 0x03EC 0x0000 0x5 0x0 @@ -380,8 +391,8 @@ #define MX6SX_PAD_KEY_COL0__VADC_DATA_0 0x00A4 0x03EC 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_COL1__KPP_COL_1 0x00A8 0x03F0 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B 0x00A8 0x03F0 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_COL1__UART6_RX 0x00A8 0x03F0 0x0858 0x2 0x2 -#define MX6SX_PAD_KEY_COL1__UART6_TX 0x00A8 0x03F0 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL1__UART6_DCE_TX 0x00A8 0x03F0 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL1__UART6_DTE_RX 0x00A8 0x03F0 0x0858 0x2 0x2 #define MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x00A8 0x03F0 0x0714 0x3 0x0 #define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x00A8 0x03F0 0x0670 0x4 0x0 #define MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x00A8 0x03F0 0x0000 0x5 0x0 @@ -389,7 +400,8 @@ #define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC 0x00A8 0x03F0 0x0818 0x7 0x0 #define MX6SX_PAD_KEY_COL2__KPP_COL_2 0x00AC 0x03F4 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL2__USDHC4_CD_B 0x00AC 0x03F4 0x0874 0x1 0x1 -#define MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x00AC 0x03F4 0x084C 0x2 0x2 +#define MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x00AC 0x03F4 0x084C 0x2 0x2 +#define MX6SX_PAD_KEY_COL2__UART5_DTE_CTS 0x00AC 0x03F4 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_COL2__CAN1_TX 0x00AC 0x03F4 0x0000 0x3 0x0 #define MX6SX_PAD_KEY_COL2__CANFD_TX1 0x00AC 0x03F4 0x0000 0x4 0x0 #define MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x00AC 0x03F4 0x0000 0x5 0x0 @@ -397,8 +409,8 @@ #define MX6SX_PAD_KEY_COL2__ECSPI1_RDY 0x00AC 0x03F4 0x0000 0x7 0x0 #define MX6SX_PAD_KEY_COL3__KPP_COL_3 0x00B0 0x03F8 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL3__USDHC4_LCTL 0x00B0 0x03F8 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_COL3__UART5_RX 0x00B0 0x03F8 0x0850 0x2 0x2 -#define MX6SX_PAD_KEY_COL3__UART5_TX 0x00B0 0x03F8 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x00B0 0x03F8 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL3__UART5_DTE_RX 0x00B0 0x03F8 0x0850 0x2 0x2 #define MX6SX_PAD_KEY_COL3__CAN2_TX 0x00B0 0x03F8 0x0000 0x3 0x0 #define MX6SX_PAD_KEY_COL3__CANFD_TX2 0x00B0 0x03F8 0x0000 0x4 0x0 #define MX6SX_PAD_KEY_COL3__GPIO2_IO_13 0x00B0 0x03F8 0x0000 0x5 0x0 @@ -414,7 +426,8 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS 0x00B8 0x0400 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW0__UART6_DTE_RTS 0x00B8 0x0400 0x0854 0x2 0x3 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,8 +436,8 @@ #define MX6SX_PAD_KEY_ROW0__GPU_IDLE 0x00B8 0x0400 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW1__KPP_ROW_1 0x00BC 0x0404 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT 0x00BC 0x0404 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW1__UART6_RX 0x00BC 0x0404 0x0858 0x2 0x3 -#define MX6SX_PAD_KEY_ROW1__UART6_TX 0x00BC 0x0404 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW1__UART6_DCE_RX 0x00BC 0x0404 0x0858 0x2 0x3 +#define MX6SX_PAD_KEY_ROW1__UART6_DTE_TX 0x00BC 0x0404 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0 0x00BC 0x0404 0x071C 0x3 0x0 #define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x00BC 0x0404 0x065C 0x4 0x0 #define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x00BC 0x0404 0x0000 0x5 0x0 @@ -433,7 +446,8 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x00C0 0x0408 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW2__UART5_DTE_RTS 0x00C0 0x0408 0x084C 0x2 0x3 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -441,8 +455,8 @@ #define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3 0x00C0 0x0408 0x0000 0x7 0x0 #define MX6SX_PAD_KEY_ROW3__KPP_ROW_3 0x00C4 0x040C 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL 0x00C4 0x040C 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW3__UART5_RX 0x00C4 0x040C 0x0850 0x2 0x3 -#define MX6SX_PAD_KEY_ROW3__UART5_TX 0x00C4 0x040C 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x00C4 0x040C 0x0850 0x2 0x3 +#define MX6SX_PAD_KEY_ROW3__UART5_DTE_TX 0x00C4 0x040C 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW3__CAN2_RX 0x00C4 0x040C 0x0690 0x3 0x1 #define MX6SX_PAD_KEY_ROW3__CANFD_RX2 0x00C4 0x040C 0x0698 0x4 0x1 #define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18 0x00C4 0x040C 0x0000 0x5 0x0 @@ -815,7 +829,8 @@ #define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04 0x0160 0x04A8 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4 0x0160 0x04A8 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B 0x0160 0x04A8 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B 0x0160 0x04A8 0x083C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS 0x0160 0x04A8 0x083C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA04__UART3_DTE_CTS 0x0160 0x04A8 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS 0x0160 0x04A8 0x0650 0x4 0x0 #define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x0160 0x04A8 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA04__WEIM_AD_4 0x0160 0x04A8 0x0000 0x6 0x0 @@ -825,7 +840,8 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS 0x0164 0x04AC 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA05__UART3_DTE_RTS 0x0164 0x04AC 0x083C 0x3 0x1 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -835,8 +851,8 @@ #define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06 0x0168 0x04B0 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6 0x0168 0x04B0 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B 0x0168 0x04B0 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA06__UART3_RX 0x0168 0x04B0 0x0840 0x3 0x0 -#define MX6SX_PAD_NAND_DATA06__UART3_TX 0x0168 0x04B0 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_DCE_RX 0x0168 0x04B0 0x0840 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_DTE_TX 0x0168 0x04B0 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA06__PWM3_OUT 0x0168 0x04B0 0x0000 0x4 0x0 #define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0x0168 0x04B0 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA06__WEIM_AD_6 0x0168 0x04B0 0x0000 0x6 0x0 @@ -846,8 +862,8 @@ #define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07 0x016C 0x04B4 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7 0x016C 0x04B4 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS 0x016C 0x04B4 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA07__UART3_RX 0x016C 0x04B4 0x0840 0x3 0x1 -#define MX6SX_PAD_NAND_DATA07__UART3_TX 0x016C 0x04B4 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA07__UART3_DCE_TX 0x016C 0x04B4 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA07__UART3_DTE_RX 0x016C 0x04B4 0x0840 0x3 0x1 #define MX6SX_PAD_NAND_DATA07__PWM4_OUT 0x016C 0x04B4 0x0000 0x4 0x0 #define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0x016C 0x04B4 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA07__WEIM_AD_7 0x016C 0x04B4 0x0000 0x6 0x0 @@ -967,7 +983,8 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS 0x01A0 0x04E8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_DTE_RTS 0x01A0 0x04E8 0x083C 0x1 0x4 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -975,7 +992,8 @@ #define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14 0x01A0 0x04E8 0x0000 0x6 0x0 #define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9 0x01A0 0x04E8 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 0x01A4 0x04EC 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B 0x01A4 0x04EC 0x083C 0x1 0x5 +#define MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS 0x01A4 0x04EC 0x083C 0x1 0x5 +#define MX6SX_PAD_QSPI1B_DATA1__UART3_DTE_CTS 0x01A4 0x04EC 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO 0x01A4 0x04EC 0x0734 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK 0x01A4 0x04EC 0x0788 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21 0x01A4 0x04EC 0x06F0 0x4 0x1 @@ -1007,8 +1025,8 @@ #define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15 0x01B0 0x04F8 0x0000 0x6 0x0 #define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x01B4 0x04FC 0x0840 0x1 0x4 -#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX 0x01B4 0x04FC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x01B4 0x04FC 0x0840 0x1 0x4 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x0 0x0 #define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1 #define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2 #define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1 @@ -1016,8 +1034,8 @@ #define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8 0x01B4 0x04FC 0x0000 0x6 0x0 #define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11 0x01B4 0x04FC 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B 0x01B8 0x0500 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX 0x01B8 0x0500 0x0840 0x1 0x5 -#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x01B8 0x0500 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX 0x01B8 0x0500 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX 0x01B8 0x0500 0x0840 0x1 0x5 #define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0 0x01B8 0x0500 0x073C 0x2 0x1 #define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK 0x01B8 0x0500 0x0784 0x3 0x3 #define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17 0x01B8 0x0500 0x06E0 0x4 0x1 @@ -1224,8 +1242,8 @@ #define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x0228 0x0570 0x065C 0x1 0x1 #define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS 0x0228 0x0570 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1 0x0228 0x0570 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA0__UART2_RX 0x0228 0x0570 0x0838 0x4 0x2 -#define MX6SX_PAD_SD1_DATA0__UART2_TX 0x0228 0x0570 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA0__UART2_DCE_RX 0x0228 0x0570 0x0838 0x4 0x2 +#define MX6SX_PAD_SD1_DATA0__UART2_DTE_TX 0x0228 0x0570 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x0228 0x0570 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN 0x0228 0x0570 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA0__CCM_OUT2 0x0228 0x0570 0x0000 0x7 0x0 @@ -1235,8 +1253,8 @@ #define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x022C 0x0574 0x066C 0x1 0x1 #define MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x022C 0x0574 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2 0x022C 0x0574 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA1__UART2_RX 0x022C 0x0574 0x0838 0x4 0x3 -#define MX6SX_PAD_SD1_DATA1__UART2_TX 0x022C 0x0574 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA1__UART2_DCE_TX 0x022C 0x0574 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA1__UART2_DTE_RX 0x022C 0x0574 0x0838 0x4 0x3 #define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3 0x022C 0x0574 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT 0x022C 0x0574 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA1__CCM_CLKO2 0x022C 0x0574 0x0000 0x7 0x0 @@ -1246,7 +1264,8 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS 0x0230 0x0578 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA2__UART2_DTE_RTS 0x0230 0x0578 0x0834 0x4 0x2 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1255,7 +1274,8 @@ #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x0234 0x057C 0x0660 0x1 0x1 #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD 0x0234 0x057C 0x065C 0x2 0x2 #define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3 0x0234 0x057C 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B 0x0234 0x057C 0x0834 0x4 0x3 +#define MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS 0x0234 0x057C 0x0834 0x4 0x3 +#define MX6SX_PAD_SD1_DATA3__UART2_DTE_CTS 0x0234 0x057C 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0x0234 0x057C 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1 0x0234 0x057C 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY 0x0234 0x057C 0x069C 0x7 0x2 @@ -1287,8 +1307,8 @@ #define MX6SX_PAD_SD2_DATA0__I2C4_SDA 0x0240 0x0588 0x07C4 0x4 0x3 #define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8 0x0240 0x0588 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3 0x0240 0x0588 0x0000 0x6 0x0 -#define MX6SX_PAD_SD2_DATA0__UART4_RX 0x0240 0x0588 0x0848 0x7 0x4 -#define MX6SX_PAD_SD2_DATA0__UART4_TX 0x0240 0x0588 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA0__UART4_DCE_RX 0x0240 0x0588 0x0848 0x7 0x4 +#define MX6SX_PAD_SD2_DATA0__UART4_DTE_TX 0x0240 0x0588 0x0000 0x7 0x0 #define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0 0x0240 0x0588 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50 0x0240 0x0588 0x0000 0x9 0x0 #define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x0244 0x058C 0x0000 0x0 0x0 @@ -1298,8 +1318,8 @@ #define MX6SX_PAD_SD2_DATA1__I2C4_SCL 0x0244 0x058C 0x07C0 0x4 0x3 #define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9 0x0244 0x058C 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2 0x0244 0x058C 0x0000 0x6 0x0 -#define MX6SX_PAD_SD2_DATA1__UART4_RX 0x0244 0x058C 0x0848 0x7 0x5 -#define MX6SX_PAD_SD2_DATA1__UART4_TX 0x0244 0x058C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA1__UART4_DCE_TX 0x0244 0x058C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA1__UART4_DTE_RX 0x0244 0x058C 0x0848 0x7 0x5 #define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1 0x0244 0x058C 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49 0x0244 0x058C 0x0000 0x9 0x0 #define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x0248 0x0590 0x0000 0x0 0x0 @@ -1309,8 +1329,8 @@ #define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0 0x0248 0x0590 0x081C 0x4 0x2 #define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10 0x0248 0x0590 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA2__SPDIF_OUT 0x0248 0x0590 0x0000 0x6 0x0 -#define MX6SX_PAD_SD2_DATA2__UART6_RX 0x0248 0x0590 0x0858 0x7 0x4 -#define MX6SX_PAD_SD2_DATA2__UART6_TX 0x0248 0x0590 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA2__UART6_DCE_RX 0x0248 0x0590 0x0858 0x7 0x4 +#define MX6SX_PAD_SD2_DATA2__UART6_DTE_TX 0x0248 0x0590 0x0000 0x7 0x0 #define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2 0x0248 0x0590 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32 0x0248 0x0590 0x0000 0x9 0x0 #define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x024C 0x0594 0x0000 0x0 0x0 @@ -1320,12 +1340,13 @@ #define MX6SX_PAD_SD2_DATA3__MLB_DATA 0x024C 0x0594 0x07EC 0x4 0x2 #define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11 0x024C 0x0594 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA3__SPDIF_IN 0x024C 0x0594 0x0824 0x6 0x4 -#define MX6SX_PAD_SD2_DATA3__UART6_RX 0x024C 0x0594 0x0858 0x7 0x5 -#define MX6SX_PAD_SD2_DATA3__UART6_TX 0x024C 0x0594 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA3__UART6_DCE_TX 0x024C 0x0594 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA3__UART6_DTE_RX 0x024C 0x0594 0x0858 0x7 0x5 #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_DCE_CTS 0x0250 0x0598 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_DTE_RTS 0x0250 0x0598 0x0844 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1334,8 +1355,8 @@ #define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29 0x0250 0x0598 0x0000 0x7 0x0 #define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5 0x0250 0x0598 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x0254 0x059C 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CMD__UART4_RX 0x0254 0x059C 0x0848 0x1 0x0 -#define MX6SX_PAD_SD3_CMD__UART4_TX 0x0254 0x059C 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_DCE_TX 0x0254 0x059C 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_DTE_RX 0x0254 0x059C 0x0848 0x1 0x0 #define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x0254 0x059C 0x0748 0x2 0x0 #define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC 0x0254 0x059C 0x067C 0x3 0x0 #define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC 0x0254 0x059C 0x07E4 0x4 0x1 @@ -1364,7 +1385,8 @@ #define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1 0x025C 0x05A4 0x0000 0x8 0x0 #define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1 0x025C 0x05A4 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x0260 0x05A8 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B 0x0260 0x05A8 0x0844 0x1 0x1 +#define MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS 0x0260 0x05A8 0x0844 0x1 0x1 +#define MX6SX_PAD_SD3_DATA2__UART4_DTE_CTS 0x0260 0x05A8 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0 0x0260 0x05A8 0x074C 0x2 0x0 #define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS 0x0260 0x05A8 0x0688 0x3 0x0 #define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK 0x0260 0x05A8 0x0000 0x4 0x0 @@ -1374,8 +1396,8 @@ #define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2 0x0260 0x05A8 0x0000 0x8 0x0 #define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2 0x0260 0x05A8 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x0264 0x05AC 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_DATA3__UART4_RX 0x0264 0x05AC 0x0848 0x1 0x1 -#define MX6SX_PAD_SD3_DATA3__UART4_TX 0x0264 0x05AC 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_DATA3__UART4_DCE_RX 0x0264 0x05AC 0x0848 0x1 0x1 +#define MX6SX_PAD_SD3_DATA3__UART4_DTE_TX 0x0264 0x05AC 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x0264 0x05AC 0x0744 0x2 0x0 #define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD 0x0264 0x05AC 0x0678 0x3 0x0 #define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE 0x0264 0x05AC 0x0000 0x4 0x0 @@ -1387,8 +1409,8 @@ #define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x0268 0x05B0 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA4__CAN2_RX 0x0268 0x05B0 0x0690 0x1 0x0 #define MX6SX_PAD_SD3_DATA4__CANFD_RX2 0x0268 0x05B0 0x0698 0x2 0x0 -#define MX6SX_PAD_SD3_DATA4__UART3_RX 0x0268 0x05B0 0x0840 0x3 0x2 -#define MX6SX_PAD_SD3_DATA4__UART3_TX 0x0268 0x05B0 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA4__UART3_DCE_RX 0x0268 0x05B0 0x0840 0x3 0x2 +#define MX6SX_PAD_SD3_DATA4__UART3_DTE_TX 0x0268 0x05B0 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3 0x0268 0x05B0 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x0268 0x05B0 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN 0x0268 0x05B0 0x0000 0x6 0x0 @@ -1398,8 +1420,8 @@ #define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x026C 0x05B4 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA5__CAN1_TX 0x026C 0x05B4 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA5__CANFD_TX1 0x026C 0x05B4 0x0000 0x2 0x0 -#define MX6SX_PAD_SD3_DATA5__UART3_RX 0x026C 0x05B4 0x0840 0x3 0x3 -#define MX6SX_PAD_SD3_DATA5__UART3_TX 0x026C 0x05B4 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA5__UART3_DCE_TX 0x026C 0x05B4 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA5__UART3_DTE_RX 0x026C 0x05B4 0x0840 0x3 0x3 #define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2 0x026C 0x05B4 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x026C 0x05B4 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT 0x026C 0x05B4 0x0000 0x6 0x0 @@ -1409,7 +1431,8 @@ #define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x0270 0x05B8 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA6__CAN2_TX 0x0270 0x05B8 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA6__CANFD_TX2 0x0270 0x05B8 0x0000 0x2 0x0 -#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x0270 0x05B8 0x083C 0x3 0x2 +#define MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x0270 0x05B8 0x083C 0x3 0x2 +#define MX6SX_PAD_SD3_DATA6__UART3_DTE_CTS 0x0270 0x05B8 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4 0x0270 0x05B8 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8 0x0270 0x05B8 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT 0x0270 0x05B8 0x0000 0x6 0x0 @@ -1419,7 +1442,8 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x0274 0x05BC 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA7__UART3_DTE_RTS 0x0274 0x05BC 0x083C 0x3 0x3 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1488,8 +1512,8 @@ #define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS 0x028C 0x05D4 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x0290 0x05D8 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09 0x0290 0x05D8 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA4__UART5_RX 0x0290 0x05D8 0x0850 0x2 0x0 -#define MX6SX_PAD_SD4_DATA4__UART5_TX 0x0290 0x05D8 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_DCE_RX 0x0290 0x05D8 0x0850 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_DTE_TX 0x0290 0x05D8 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK 0x0290 0x05D8 0x0730 0x3 0x0 #define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8 0x0290 0x05D8 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18 0x0290 0x05D8 0x0000 0x5 0x0 @@ -1499,8 +1523,8 @@ #define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE 0x0290 0x05D8 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x0294 0x05DC 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B 0x0294 0x05DC 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA5__UART5_RX 0x0294 0x05DC 0x0850 0x2 0x1 -#define MX6SX_PAD_SD4_DATA5__UART5_TX 0x0294 0x05DC 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA5__UART5_DCE_TX 0x0294 0x05DC 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA5__UART5_DTE_RX 0x0294 0x05DC 0x0850 0x2 0x1 #define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI 0x0294 0x05DC 0x0738 0x3 0x0 #define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7 0x0294 0x05DC 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19 0x0294 0x05DC 0x0000 0x5 0x0 @@ -1510,7 +1534,8 @@ #define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0 0x0294 0x05DC 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x0298 0x05E0 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B 0x0298 0x05E0 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B 0x0298 0x05E0 0x084C 0x2 0x0 +#define MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS 0x0298 0x05E0 0x084C 0x2 0x0 +#define MX6SX_PAD_SD4_DATA6__UART5_DTE_CTS 0x0298 0x05E0 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO 0x0298 0x05E0 0x0734 0x3 0x0 #define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6 0x0298 0x05E0 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x0298 0x05E0 0x0000 0x5 0x0 @@ -1520,7 +1545,8 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS 0x029C 0x05E4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA7__UART5_DTE_RTS 0x029C 0x05E4 0x084C 0x2 0x1 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 @@ -1551,4 +1577,92 @@ #define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB 0x02A8 0x05F0 0x0000 0x4 0x0 #define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11 0x02A8 0x05F0 0x0000 0x5 0x0 +/* these are not supposed to be used any more and remove them after some time */ +#define MX6SX_PAD_GPIO1_IO04__UART1_RX MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX +#define MX6SX_PAD_GPIO1_IO04__UART1_TX MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX +#define MX6SX_PAD_GPIO1_IO05__UART1_RX MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX +#define MX6SX_PAD_GPIO1_IO05__UART1_TX MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX +#define MX6SX_PAD_GPIO1_IO06__UART2_RX MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX +#define MX6SX_PAD_GPIO1_IO06__UART2_TX MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX +#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS +#define MX6SX_PAD_GPIO1_IO07__UART2_RX MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX +#define MX6SX_PAD_GPIO1_IO07__UART2_TX MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS +#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS +#define MX6SX_PAD_CSI_DATA04__UART6_RX MX6SX_PAD_CSI_DATA04__UART6_DCE_RX +#define MX6SX_PAD_CSI_DATA04__UART6_TX MX6SX_PAD_CSI_DATA04__UART6_DTE_TX +#define MX6SX_PAD_CSI_DATA05__UART6_RX MX6SX_PAD_CSI_DATA05__UART6_DTE_RX +#define MX6SX_PAD_CSI_DATA05__UART6_TX MX6SX_PAD_CSI_DATA05__UART6_DCE_TX +#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS +#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS +#define MX6SX_PAD_CSI_MCLK__UART4_RX MX6SX_PAD_CSI_MCLK__UART4_DCE_RX +#define MX6SX_PAD_CSI_MCLK__UART4_TX MX6SX_PAD_CSI_MCLK__UART4_DTE_TX +#define MX6SX_PAD_CSI_PIXCLK__UART4_RX MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX +#define MX6SX_PAD_CSI_PIXCLK__UART4_TX MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS +#define MX6SX_PAD_ENET2_COL__UART1_RX MX6SX_PAD_ENET2_COL__UART1_DCE_RX +#define MX6SX_PAD_ENET2_COL__UART1_TX MX6SX_PAD_ENET2_COL__UART1_DTE_TX +#define MX6SX_PAD_ENET2_CRS__UART1_RX MX6SX_PAD_ENET2_CRS__UART1_DTE_RX +#define MX6SX_PAD_ENET2_CRS__UART1_TX MX6SX_PAD_ENET2_CRS__UART1_DCE_TX +#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS +#define MX6SX_PAD_KEY_COL0__UART6_RTS_B MX6SX_PAD_KEY_COL0__UART6_DCE_RTS +#define MX6SX_PAD_KEY_COL1__UART6_RX MX6SX_PAD_KEY_COL1__UART6_DTE_RX +#define MX6SX_PAD_KEY_COL1__UART6_TX MX6SX_PAD_KEY_COL1__UART6_DCE_TX +#define MX6SX_PAD_KEY_COL2__UART5_RTS_B MX6SX_PAD_KEY_COL2__UART5_DCE_RTS +#define MX6SX_PAD_KEY_COL3__UART5_RX MX6SX_PAD_KEY_COL3__UART5_DTE_RX +#define MX6SX_PAD_KEY_COL3__UART5_TX MX6SX_PAD_KEY_COL3__UART5_DCE_TX +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS +#define MX6SX_PAD_KEY_ROW1__UART6_RX MX6SX_PAD_KEY_ROW1__UART6_DCE_RX +#define MX6SX_PAD_KEY_ROW1__UART6_TX MX6SX_PAD_KEY_ROW1__UART6_DTE_TX +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS +#define MX6SX_PAD_KEY_ROW3__UART5_RX MX6SX_PAD_KEY_ROW3__UART5_DCE_RX +#define MX6SX_PAD_KEY_ROW3__UART5_TX MX6SX_PAD_KEY_ROW3__UART5_DTE_TX +#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS +#define MX6SX_PAD_NAND_DATA06__UART3_RX MX6SX_PAD_NAND_DATA06__UART3_DCE_RX +#define MX6SX_PAD_NAND_DATA06__UART3_TX MX6SX_PAD_NAND_DATA06__UART3_DTE_TX +#define MX6SX_PAD_NAND_DATA07__UART3_RX MX6SX_PAD_NAND_DATA07__UART3_DTE_RX +#define MX6SX_PAD_NAND_DATA07__UART3_TX MX6SX_PAD_NAND_DATA07__UART3_DCE_TX +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS +#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS +#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX +#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX +#define MX6SX_PAD_SD1_DATA0__UART2_RX MX6SX_PAD_SD1_DATA0__UART2_DCE_RX +#define MX6SX_PAD_SD1_DATA0__UART2_TX MX6SX_PAD_SD1_DATA0__UART2_DTE_TX +#define MX6SX_PAD_SD1_DATA1__UART2_RX MX6SX_PAD_SD1_DATA1__UART2_DTE_RX +#define MX6SX_PAD_SD1_DATA1__UART2_TX MX6SX_PAD_SD1_DATA1__UART2_DCE_TX +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS +#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS +#define MX6SX_PAD_SD2_DATA0__UART4_RX MX6SX_PAD_SD2_DATA0__UART4_DCE_RX +#define MX6SX_PAD_SD2_DATA0__UART4_TX MX6SX_PAD_SD2_DATA0__UART4_DTE_TX +#define MX6SX_PAD_SD2_DATA1__UART4_RX MX6SX_PAD_SD2_DATA1__UART4_DTE_RX +#define MX6SX_PAD_SD2_DATA1__UART4_TX MX6SX_PAD_SD2_DATA1__UART4_DCE_TX +#define MX6SX_PAD_SD2_DATA2__UART6_RX MX6SX_PAD_SD2_DATA2__UART6_DCE_RX +#define MX6SX_PAD_SD2_DATA2__UART6_TX MX6SX_PAD_SD2_DATA2__UART6_DTE_TX +#define MX6SX_PAD_SD2_DATA3__UART6_RX MX6SX_PAD_SD2_DATA3__UART6_DTE_RX +#define MX6SX_PAD_SD2_DATA3__UART6_TX MX6SX_PAD_SD2_DATA3__UART6_DCE_TX +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B MX6SX_PAD_SD3_CLK__UART4_DCE_CTS +#define MX6SX_PAD_SD3_CMD__UART4_RX MX6SX_PAD_SD3_CMD__UART4_DTE_RX +#define MX6SX_PAD_SD3_CMD__UART4_TX MX6SX_PAD_SD3_CMD__UART4_DCE_TX +#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS +#define MX6SX_PAD_SD3_DATA3__UART4_RX MX6SX_PAD_SD3_DATA3__UART4_DCE_RX +#define MX6SX_PAD_SD3_DATA3__UART4_TX MX6SX_PAD_SD3_DATA3__UART4_DTE_TX +#define MX6SX_PAD_SD3_DATA4__UART3_RX MX6SX_PAD_SD3_DATA4__UART3_DCE_RX +#define MX6SX_PAD_SD3_DATA4__UART3_TX MX6SX_PAD_SD3_DATA4__UART3_DTE_TX +#define MX6SX_PAD_SD3_DATA5__UART3_RX MX6SX_PAD_SD3_DATA5__UART3_DTE_RX +#define MX6SX_PAD_SD3_DATA5__UART3_TX MX6SX_PAD_SD3_DATA5__UART3_DCE_TX +#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS +#define MX6SX_PAD_SD4_DATA4__UART5_RX MX6SX_PAD_SD4_DATA4__UART5_DCE_RX +#define MX6SX_PAD_SD4_DATA4__UART5_TX MX6SX_PAD_SD4_DATA4__UART5_DTE_TX +#define MX6SX_PAD_SD4_DATA5__UART5_RX MX6SX_PAD_SD4_DATA5__UART5_DTE_RX +#define MX6SX_PAD_SD4_DATA5__UART5_TX MX6SX_PAD_SD4_DATA5__UART5_DCE_TX +#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS + #endif /* __DTS_IMX6SX_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 315044ccd65f..825924448ab4 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -229,8 +229,8 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index f6972deb5e39..3e5fb72f21fc 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -564,17 +564,17 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < - MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 - MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 - MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 + MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x1b0b1 + MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 28563f21024e..6b728b03f1f2 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -352,6 +352,12 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_NAND_DATA02__GPIO4_IO_6 0x10b0 + >; + }; + pinctrl_pwm1: pwm1grp-1 { fsl,pins = < /* blue LED */ @@ -384,15 +390,15 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1 >; }; @@ -490,6 +496,14 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; + reset-gpio-active-high; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 25d4aa985a69..ee645655090d 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -235,28 +235,28 @@ pinctrl_uart1: uart1grp { fsl,pins = - <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, - <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>; + <MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1>; }; pinctrl_uart2: uart2grp { fsl,pins = - <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>, - <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>; + <MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1>; }; pinctrl_uart3: uart3grp { fsl,pins = - <MX6SX_PAD_SD3_DATA4__UART3_RX 0x13059>, - <MX6SX_PAD_SD3_DATA5__UART3_TX 0x13059>, - <MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x13059>, - <MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x13059>; + <MX6SX_PAD_SD3_DATA4__UART3_DCE_RX 0x13059>, + <MX6SX_PAD_SD3_DATA5__UART3_DCE_TX 0x13059>, + <MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x13059>, + <MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x13059>; }; pinctrl_uart5: uart5grp { fsl,pins = - <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>, - <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>; + <MX6SX_PAD_SD4_DATA4__UART5_DCE_RX 0x1b0b1>, + <MX6SX_PAD_SD4_DATA5__UART5_DCE_TX 0x1b0b1>; }; pinctrl_uart6: uart6grp { @@ -265,10 +265,10 @@ <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>, <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>, <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>, - <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>, - <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>, - <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>, - <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>; + <MX6SX_PAD_CSI_DATA04__UART6_DCE_RX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA05__UART6_DCE_TX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS 0x1b0b1>, + <MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS 0x1b0b1>; }; pinctrl_otg1_reg: otg1grp { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 59bad60a47dc..d6f831731460 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -87,6 +87,8 @@ "pll1_sw", "pll1_sys"; arm-supply = <®_arm>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -235,7 +237,7 @@ status = "disabled"; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -466,7 +468,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -559,7 +561,7 @@ gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -567,14 +569,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_IPG>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -582,7 +584,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6sx-ccm"; reg = <0x020c4000 0x4000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, @@ -806,7 +808,7 @@ }; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6sx-iomuxc"; reg = <0x020e0000 0x4000>; }; @@ -830,14 +832,14 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - crypto: caam@2100000 { + crypto: crypto@2100000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -850,13 +852,13 @@ <&clks IMX6SX_CLK_EIM_SLOW>; clock-names = "mem", "aclk", "ipg", "emi_slow"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -1051,13 +1053,17 @@ status = "disabled"; }; - ocotp: ocotp@21bc000 { + ocotp: ocotp-ctrl@21bc000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx6sx-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SX_CLK_OCOTP>; + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + tempmon_calib: calib@38 { reg = <0x38 4>; }; @@ -1188,7 +1194,7 @@ }; }; - aips3: aips-bus@2200000 { + aips3: bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -1289,7 +1295,7 @@ status = "disabled"; }; - wdog3: wdog@2288000 { + wdog3: watchdog@2288000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x02288000 0x4000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index 3749fdda3611..5d3805b07032 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -25,7 +25,7 @@ }; panel { - compatible = "auo,g101evn010", "simple-panel"; + compatible = "auo,g101evn010"; power-supply = <&ldo4_ext>; backlight = <&lcd_backlight>; diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts new file mode 100644 index 000000000000..162dc259edc8 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx6ul-pico.dtsi" +/ { + model = "TechNexion PICO-IMX6UL and DWARF baseboard"; + compatible = "technexion,imx6ul-pico-dwarf", "fsl,imx6ul"; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6ul-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: audio-codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi index de9f83189ba8..df1da98ab10f 100644 --- a/arch/arm/boot/dts/imx6ul-pico.dtsi +++ b/arch/arm/boot/dts/imx6ul-pico.dtsi @@ -20,7 +20,7 @@ stdout-path = &uart6; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -72,6 +72,17 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <200000>; }; + + panel { + compatible = "vxt,vl050-8048nt-c01"; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &can1 { @@ -154,31 +165,11 @@ &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - - timing0: timing0 { - clock-frequency = <33200000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <210>; - hback-porch = <46>; - hsync-len = <1>; - vback-porch = <22>; - vfront-porch = <23>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d9fdca12819b..2ccf67c4ac1a 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -204,7 +204,7 @@ status = "disabled"; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -430,7 +430,7 @@ status = "disabled"; }; - gpt1: gpt@2098000 { + gpt1: timer@2098000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -523,7 +523,7 @@ status = "disabled"; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -531,14 +531,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_WDOG1>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -546,7 +546,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6ul-ccm"; reg = <0x020c4000 0x4000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, @@ -693,7 +693,7 @@ interrupt-parent = <&intc>; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6ul-iomuxc"; reg = <0x020e0000 0x4000>; }; @@ -704,7 +704,7 @@ reg = <0x020e4000 0x4000>; }; - gpt2: gpt@20e8000 { + gpt2: timer@20e8000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x020e8000 0x4000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; @@ -771,14 +771,14 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - crypto: caam@2140000 { + crypto: crypto@2140000 { compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -789,19 +789,19 @@ <&clks IMX6UL_CLK_CAAM_MEM>; clock-names = "ipg", "aclk", "mem"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr2: jr2@3000 { + sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -1007,7 +1007,7 @@ status = "disabled"; }; - wdog3: wdog@21e4000 { + wdog3: watchdog@21e4000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x021e4000 0x4000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index b7e67d121322..fcde7f77ae42 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -51,7 +51,7 @@ / { soc { - aips3: aips-bus@2200000 { + aips3: bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi new file mode 100644 index 000000000000..9fa701bec2ec --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + + +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + panel: panel { + compatible = "edt,et057090dhu"; + backlight = <&bl>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +/* + * ADC2 is not available on the Aster board and + * conflicts with AD7879 resistive touchscreen. + */ +&adc2 { + status = "disabled"; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_3v3>; + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + /* Microchip/Atmel maxtouch controller */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x4a>; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + }; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl_gpiotouch: touchgpios { + fsl,pins = < + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 + >; + }; +}; + +&lcdif { + status = "okay"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usdhc1 { + keep-power-in-suspend; + no-1-8-v; + wakeup-source; + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 6aa123cbdadb..97601375f264 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -1,46 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ / { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 04717cf69db0..e18e89dec879 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ / { @@ -130,6 +93,184 @@ status = "disabled"; }; +&gpio1 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_135", + "SODIMM_22", + "", + "", + "SODIMM_37", + "SODIMM_29", + "SODIMM_59", + "SODIMM_28", + "SODIMM_30", + "SODIMM_67", + "", + "", + "SODIMM_188", + "SODIMM_178"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_111", + "SODIMM_113", + "SODIMM_115", + "SODIMM_117", + "SODIMM_119", + "SODIMM_121", + "SODIMM_123", + "SODIMM_125", + "SODIMM_91", + "SODIMM_89", + "SODIMM_105", + "SODIMM_152", + "SODIMM_150", + "SODIMM_95", + "SODIMM_126", + "SODIMM_107", + "SODIMM_114", + "SODIMM_116", + "SODIMM_118", + "SODIMM_120", + "SODIMM_122", + "SODIMM_124", + "SODIMM_127", + "SODIMM_130", + "SODIMM_132", + "SODIMM_134", + "SODIMM_133", + "SODIMM_104", + "SODIMM_106", + "SODIMM_110", + "SODIMM_112", + "SODIMM_128"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "SODIMM_93", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_136", + "SODIMM_138", + "SODIMM_140", + "SODIMM_142", + "SODIMM_144", + "SODIMM_146"; +}; + +&gpio4 { + gpio-line-names = "SODIMM_35", + "SODIMM_33", + "SODIMM_38", + "SODIMM_36", + "SODIMM_21", + "SODIMM_19", + "SODIMM_131", + "SODIMM_129", + "SODIMM_90", + "SODIMM_92", + "SODIMM_88", + "SODIMM_86", + "SODIMM_81", + "SODIMM_94", + "SODIMM_96", + "SODIMM_75", + "SODIMM_101", + "SODIMM_103", + "SODIMM_79", + "SODIMM_97", + "SODIMM_67", + "SODIMM_59", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_69", + "SODIMM_71", + "SODIMM_73", + "SODIMM_47", + "SODIMM_190", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53", + "", + "", + "SODIMM_98", + "SODIMM_184", + "SODIMM_186", + "SODIMM_23", + "SODIMM_31", + "SODIMM_100", + "SODIMM_102"; +}; + +&gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_169", + "", + "", + "", + "SODIMM_77", + "SODIMM_24", + "", + "SODIMM_25", + "SODIMM_27", + "SODIMM_32", + "SODIMM_34"; +}; + +&gpio7 { + gpio-line-names = "", + "", + "SODIMM_63", + "SODIMM_55", + "", + "", + "", + "", + "SODIMM_196", + "SODIMM_194", + "", + "SODIMM_99", + "", + "", + "SODIMM_137"; +}; + &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; @@ -345,7 +486,7 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4 - &pinctrl_gpio7>; + &pinctrl_gpio7 &pinctrl_usbc_det>; pinctrl_gpio1: gpio1-grp { fsl,pins = < @@ -356,7 +497,6 @@ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */ - MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 */ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ @@ -373,7 +513,6 @@ MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x74 /* SODIMM 106 */ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ @@ -450,7 +589,6 @@ pinctrl_enet1: enet1grp { fsl,pins = < - MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73 @@ -648,6 +786,12 @@ >; }; + pinctrl_usbc_det: gpio-usbc-det { + fsl,pins = < + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 + >; + }; + pinctrl_usbh_reg: gpio-usbh-vbus { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 7646284e13a7..89267cd59037 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -85,12 +85,12 @@ pmic: pmic@8 { compatible = "fsl,pfuze3000"; - reg = <0x08>; + reg = <0x8>; regulators { sw1a_reg: sw1a { regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts new file mode 100644 index 000000000000..f3f0537d5a37 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Aster Carrier Board"; + compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts new file mode 100644 index 000000000000..20480276cb0e --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board"; + compatible = "toradex,colibri-imx7d-emmc-aster", + "toradex,colibri-imx7d-emmc", "fsl,imx7d"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi index 898f4b8d7421..af39e5370fa1 100644 --- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi @@ -13,6 +13,32 @@ }; }; +&gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_169", + "SODIMM_157", + "", + "SODIMM_163", + "SODIMM_77", + "SODIMM_24", + "", + "SODIMM_25", + "SODIMM_27", + "SODIMM_32", + "SODIMM_34"; +}; + &usbotg2 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index 136e11ab4893..87b132bcd272 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index e2e327f437e3..c59d72e50920 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ #include "imx7d.dtsi" diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/imx7d-pico-dwarf.dts new file mode 100644 index 000000000000..5162fe227d1e --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico-dwarf.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx7d-pico.dtsi" +/ { + model = "TechNexion PICO-IMX7D and DWARF baseboard"; + compatible = "technexion,imx7d-pico-dwarf", "fsl,imx7d"; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx7d-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c1 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; + +&i2c4 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9554: io-expander@25 { + compatible = "nxp,pca9554"; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <0x25>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio2>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pca9554 4 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&iomuxc { + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/imx7d-pico-nymph.dts new file mode 100644 index 000000000000..104a85254adb --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico-nymph.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx7d-pico.dtsi" +/ { + model = "TechNexion PICO-IMX7 and NYMPH baseboard"; + compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx7d-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c1 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + adc@52 { + compatible = "ti,adc081c"; + reg = <0x52>; + vref-supply = <®_2p5v>; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts new file mode 100644 index 000000000000..fca4e0a95c1b --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Aster Carrier Board"; + compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s", + "fsl,imx7s"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts index bd2a49c1ade6..aa70d3f2e2e2 100644 --- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi index 6d16e32aed89..94de220a5965 100644 --- a/arch/arm/boot/dts/imx7s-colibri.dtsi +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ #include "imx7s.dtsi" diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 568d7a984aa6..76e3ffbbbfbf 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -315,7 +315,7 @@ <0x31006000 0x2000>; }; - aips1: aips-bus@30000000 { + aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -406,14 +406,14 @@ gpio-ranges = <&iomuxc 0 139 16>; }; - wdog1: wdog@30280000 { + wdog1: watchdog@30280000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; }; - wdog2: wdog@30290000 { + wdog2: watchdog@30290000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x30290000 0x10000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; @@ -421,7 +421,7 @@ status = "disabled"; }; - wdog3: wdog@302a0000 { + wdog3: watchdog@302a0000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x302a0000 0x10000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -429,7 +429,7 @@ status = "disabled"; }; - wdog4: wdog@302b0000 { + wdog4: watchdog@302b0000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x302b0000 0x10000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; @@ -443,7 +443,7 @@ fsl,input-sel = <&iomuxc>; }; - gpt1: gpt@302d0000 { + gpt1: timer@302d0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -452,7 +452,7 @@ clock-names = "ipg", "per"; }; - gpt2: gpt@302e0000 { + gpt2: timer@302e0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302e0000 0x10000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -462,7 +462,7 @@ status = "disabled"; }; - gpt3: gpt@302f0000 { + gpt3: timer@302f0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302f0000 0x10000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; @@ -472,7 +472,7 @@ status = "disabled"; }; - gpt4: gpt@30300000 { + gpt4: timer@30300000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x30300000 0x10000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; @@ -482,7 +482,7 @@ status = "disabled"; }; - kpp: kpp@30320000 { + kpp: keypad@30320000 { compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; reg = <0x30320000 0x10000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; @@ -490,7 +490,7 @@ status = "disabled"; }; - iomuxc: iomuxc@30330000 { + iomuxc: pinctrl@30330000 { compatible = "fsl,imx7d-iomuxc"; reg = <0x30330000 0x10000>; }; @@ -606,13 +606,15 @@ compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-pwrkey"; linux,keycode = <KEY_POWER>; wakeup-source; status = "disabled"; }; }; - clks: ccm@30380000 { + clks: clock-controller@30380000 { compatible = "fsl,imx7d-ccm"; reg = <0x30380000 0x10000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, @@ -663,7 +665,7 @@ }; }; - aips2: aips-bus@30400000 { + aips2: bus@30400000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -803,7 +805,7 @@ }; }; - aips3: aips-bus@30800000 { + aips3: bus@30800000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -932,7 +934,7 @@ }; }; - crypto: caam@30900000 { + crypto: crypto@30900000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -943,19 +945,19 @@ <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; clock-names = "ipg", "aclk"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr2: jr1@3000 { + sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts index a863a2b337d6..eff51e113db4 100644 --- a/arch/arm/boot/dts/imx7ulp-evk.dts +++ b/arch/arm/boot/dts/imx7ulp-evk.dts @@ -72,7 +72,7 @@ srp-disable; hnp-disable; adp-disable; - over-current-active-low; + disable-over-current; status = "okay"; }; @@ -110,7 +110,6 @@ pinctrl_usbotg1_id: otg1idgrp { fsl,pins = < IMX7ULP_PAD_PTC13__USB0_ID 0x10003 - IMX7ULP_PAD_PTC16__USB1_OC2 0x10003 >; }; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index ab91c98f2124..f7c4878534c8 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -132,13 +132,13 @@ <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; clock-names = "aclk", "ipg"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 94d2ff9836d0..198d66181c50 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -9,7 +9,6 @@ / { model = "ARM Integrator/AP"; compatible = "arm,integrator-ap"; - dma-ranges = <0x80000000 0x0 0x80000000>; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index aaedc4c742ea..04f1ae1382e7 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -19,176 +19,174 @@ device_type = "memory"; reg = <0x00000000 0x08000000>; }; +}; + +&uart3 { + status = "okay"; +}; - soc { - apb@d4000000 { - uart3: uart@d4018000 { - status = "okay"; - }; - twsi1: i2c@d4011000 { - status = "okay"; - pmic: max8925@3c { - compatible = "maxium,max8925"; - reg = <0x3c>; - interrupts = <1>; - interrupt-parent = <&intcmux4>; - interrupt-controller; - #interrupt-cells = <1>; - maxim,tsc-irq = <0>; +&twsi1 { + status = "okay"; + pmic: max8925@3c { + compatible = "maxium,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; - regulators { - SDV1 { - regulator-min-microvolt = <637500>; - regulator-max-microvolt = <1425000>; - regulator-boot-on; - regulator-always-on; - }; - SDV2 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2225000>; - regulator-boot-on; - regulator-always-on; - }; - SDV3 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO1 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO2 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2250000>; - regulator-boot-on; - regulator-always-on; - }; - LDO3 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2250000>; - regulator-boot-on; - regulator-always-on; - }; - LDO4 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO5 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO6 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO7 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO8 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO9 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO10 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - }; - LDO11 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO12 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO13 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO14 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO15 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO16 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO17 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2250000>; - regulator-boot-on; - regulator-always-on; - }; - LDO18 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2250000>; - regulator-boot-on; - regulator-always-on; - }; - LDO19 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO20 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - }; - backlight { - maxim,max8925-dual-string = <0>; - }; - charger { - batt-detect = <0>; - topoff-threshold = <1>; - fast-charge = <7>; - no-temp-support = <0>; - no-insert-detect = <0>; - }; - }; - }; - rtc: rtc@d4010000 { - status = "okay"; + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + SDV2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2225000>; + regulator-boot-on; + regulator-always-on; + }; + SDV3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; }; + LDO11 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO15 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO16 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO17 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO18 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO19 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO20 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + }; + backlight { + maxim,max8925-dual-string = <0>; + }; + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; }; }; }; + +&rtc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 6a2f072c1d0a..da10567b5aca 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -208,8 +208,8 @@ clocks = <&soc_clocks MMP2_CLK_TIMER>; }; - uart1: uart@d4030000 { - compatible = "mrvl,mmp-uart"; + uart1: serial@d4030000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4030000 0x1000>; interrupts = <27>; clocks = <&soc_clocks MMP2_CLK_UART0>; @@ -218,8 +218,8 @@ status = "disabled"; }; - uart2: uart@d4017000 { - compatible = "mrvl,mmp-uart"; + uart2: serial@d4017000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4017000 0x1000>; interrupts = <28>; clocks = <&soc_clocks MMP2_CLK_UART1>; @@ -228,8 +228,8 @@ status = "disabled"; }; - uart3: uart@d4018000 { - compatible = "mrvl,mmp-uart"; + uart3: serial@d4018000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4018000 0x1000>; interrupts = <24>; clocks = <&soc_clocks MMP2_CLK_UART2>; @@ -238,8 +238,8 @@ status = "disabled"; }; - uart4: uart@d4016000 { - compatible = "mrvl,mmp-uart"; + uart4: serial@d4016000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4016000 0x1000>; interrupts = <46>; clocks = <&soc_clocks MMP2_CLK_UART3>; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index 59a108e49b41..9b5087a95e73 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -318,8 +318,8 @@ clocks = <&soc_clocks MMP2_CLK_TIMER>; }; - uart1: uart@d4030000 { - compatible = "mrvl,mmp-uart"; + uart1: serial@d4030000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4030000 0x1000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_UART0>; @@ -328,8 +328,8 @@ status = "disabled"; }; - uart2: uart@d4017000 { - compatible = "mrvl,mmp-uart"; + uart2: serial@d4017000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4017000 0x1000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_UART1>; @@ -338,8 +338,8 @@ status = "disabled"; }; - uart3: uart@d4018000 { - compatible = "mrvl,mmp-uart"; + uart3: serial@d4018000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4018000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_UART2>; @@ -348,8 +348,8 @@ status = "disabled"; }; - uart4: uart@d4016000 { - compatible = "mrvl,mmp-uart"; + uart4: serial@d4016000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4016000 0x1000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_UART3>; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index b6e82b165f5c..9067e0ef4240 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -429,7 +429,7 @@ reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, + interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, <&omap4_pmx_core 0x160>; interrupt-names = "irq", "wakeup"; wakeup-source; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 51e1305c6471..2093b38d6e6d 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -148,7 +148,7 @@ reg = <0 0x10005000 0 0x1000>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt2701-scpsys", "syscon"; #power-domain-cells = <1>; reg = <0 0x10006000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index a79f0b6c3429..f76b4a3c34b9 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -268,7 +268,7 @@ reg = <0 0x10005000 0 0x1000>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys", "syscon"; diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 867b88103b9d..5cbb3d244c75 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -90,7 +90,7 @@ #clock-cells = <1>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys"; #power-domain-cells = <1>; @@ -241,6 +241,20 @@ status = "disabled"; }; + pwm: pwm@11006000 { + compatible = "mediatek,mt7629-pwm"; + reg = <0x11006000 0x1000>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM_PD>, + <&pericfg CLK_PERI_PWM1_PD>; + clock-names = "top", "main", "pwm1"; + assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>; + assigned-clock-parents = + <&topckgen CLK_TOP_UNIVPLL2_D4>; + status = "disabled"; + }; + i2c: i2c@11007000 { compatible = "mediatek,mt7629-i2c", "mediatek,mt2712-i2c"; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c3c6d7d04a76..4089d97405c9 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -854,34 +854,46 @@ compatible = "ti,omap2-onenand"; reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + /* + * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported + * bootloader set values when booted with v5.1 + * (OneNAND Manufacturer: Samsung): + * + * cs0 GPMC_CS_CONFIG1: 0xfb001202 + * cs0 GPMC_CS_CONFIG2: 0x00111100 + * cs0 GPMC_CS_CONFIG3: 0x00020200 + * cs0 GPMC_CS_CONFIG4: 0x11001102 + * cs0 GPMC_CS_CONFIG5: 0x03101616 + * cs0 GPMC_CS_CONFIG6: 0x90060000 + */ gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; gpmc,burst-read; gpmc,burst-wrap; gpmc,burst-write; - gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ - gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */ + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <87>; - gpmc,cs-wr-off-ns = <87>; + gpmc,cs-rd-off-ns = <102>; + gpmc,cs-wr-off-ns = <102>; gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <10>; - gpmc,adv-wr-off-ns = <10>; - gpmc,oe-on-ns = <15>; - gpmc,oe-off-ns = <87>; + gpmc,adv-rd-off-ns = <12>; + gpmc,adv-wr-off-ns = <12>; + gpmc,oe-on-ns = <12>; + gpmc,oe-off-ns = <102>; gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <87>; - gpmc,rd-cycle-ns = <112>; - gpmc,wr-cycle-ns = <112>; - gpmc,access-ns = <81>; - gpmc,page-burst-access-ns = <15>; + gpmc,we-off-ns = <102>; + gpmc,rd-cycle-ns = <132>; + gpmc,wr-cycle-ns = <132>; + gpmc,access-ns = <96>; + gpmc,page-burst-access-ns = <18>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <5>; - gpmc,wr-data-mux-bus-ns = <30>; - gpmc,wr-access-ns = <81>; + gpmc,clk-activation-ns = <6>; + gpmc,wr-data-mux-bus-ns = <36>; + gpmc,wr-access-ns = <96>; gpmc,sync-clk-ps = <15000>; /* diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index a075b63f3087..11d41e86f814 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -341,6 +341,11 @@ status = "disabled"; }; +/* RNG not directly accessible on N950/N9. */ +&rng_target { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index 459fd7027591..ef59e4e97d7c 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -1529,6 +1529,7 @@ }; }; + /* Unused DSS L4 access, see L3 instead */ target-module@40000 { /* 0x48040000, ap 13 0a.0 */ compatible = "ti,sysc"; status = "disabled"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 9a87440d0b9d..763bdea8c829 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -108,7 +108,6 @@ dsp { compatible = "ti,omap3-c64"; - ti,hwmods = "dsp"; }; iva { @@ -415,87 +414,213 @@ */ }; - dss: dss@58000000 { - compatible = "ti,omap4-dss"; - reg = <0x58000000 0x80>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + /* + * DSS is only using l3 mapping without l4 as noted in the TRM + * "10.1.3 DSS Register Manual" for omap4460. + */ + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; - - dispc@58001000 { - compatible = "ti,omap4-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; - }; - - rfbi: encoder@58002000 { - compatible = "ti,omap4-rfbi"; - reg = <0x58002000 0x1000>; - status = "disabled"; - ti,hwmods = "dss_rfbi"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>; - clock-names = "fck", "ick"; - }; + ranges = <0 0x58000000 0x1000000>; - venc: encoder@58003000 { - compatible = "ti,omap4-venc"; - reg = <0x58003000 0x1000>; + dss: dss@0 { + compatible = "ti,omap4-dss"; + reg = <0 0x80>; status = "disabled"; - ti,hwmods = "dss_venc"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; - }; - - dsi1: encoder@58004000 { - compatible = "ti,omap4-dsi"; - reg = <0x58004000 0x200>, - <0x58004200 0x40>, - <0x58004300 0x20>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi1"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - dsi2: encoder@58005000 { - compatible = "ti,omap4-dsi"; - reg = <0x58005000 0x200>, - <0x58005200 0x40>, - <0x58005300 0x20>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi2"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - hdmi: encoder@58006000 { - compatible = "ti,omap4-hdmi"; - reg = <0x58006000 0x200>, - <0x58006200 0x100>, - <0x58006300 0x100>, - <0x58006400 0x1000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma 76>; - dma-names = "audio_tx"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,omap4-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@2000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2000 0x4>, + <0x2010 0x4>, + <0x2014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + rfbi: encoder@0 { + reg = <0 0x1000>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>; + clock-names = "fck", "ick"; + }; + }; + + target-module@3000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x3000 0x4>; + reg-names = "rev"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x3000 0x1000>; + + venc: encoder@0 { + compatible = "ti,omap4-venc"; + reg = <0 0x1000>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clock-names = "fck"; + }; + }; + + target-module@4000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4000 0x1000>; + + dsi1: encoder@0 { + compatible = "ti,omap4-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x20>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + }; + }; + + target-module@5000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5000 0x4>, + <0x5010 0x4>, + <0x5014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5000 0x1000>; + + dsi2: encoder@0 { + compatible = "ti,omap4-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x20>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + }; + }; + + target-module@6000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>, + <0x6010 0x4>; + reg-names = "rev", "sysc"; + /* + * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP + * but HDMI audio will fail with them. + */ + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x6000 0x2000>; + + hdmi: encoder@0 { + compatible = "ti,omap4-hdmi"; + reg = <0 0x200>, + <0x200 0x100>, + <0x300 0x100>, + <0x400 0x1000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi index 4ec7909df78b..bafd6adf9f45 100644 --- a/arch/arm/boot/dts/omap5-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -426,8 +426,20 @@ }; target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xf1000 0x4>, + <0xf1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf1000 0x1000>, diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index d0ecf54d5a23..2ac7f021c284 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -143,6 +143,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xc0000000>; + dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; reg = <0 0x44000000 0 0x2000>, <0 0x44800000 0 0x3000>, @@ -292,78 +293,185 @@ */ }; - dss: dss@58000000 { - compatible = "ti,omap5-dss"; - reg = <0x58000000 0x80>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0x58000000 0x1000000>; - dispc@58001000 { - compatible = "ti,omap5-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; + dss: dss@0 { + compatible = "ti,omap5-dss"; + reg = <0 0x80>; + status = "disabled"; clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; - }; - - rfbi: encoder@58002000 { - compatible = "ti,omap5-rfbi"; - reg = <0x58002000 0x100>; - status = "disabled"; - ti,hwmods = "dss_rfbi"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>; - clock-names = "fck", "ick"; - }; - - dsi1: encoder@58004000 { - compatible = "ti,omap5-dsi"; - reg = <0x58004000 0x200>, - <0x58004200 0x40>, - <0x58004300 0x40>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi1"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - dsi2: encoder@58005000 { - compatible = "ti,omap5-dsi"; - reg = <0x58009000 0x200>, - <0x58009200 0x40>, - <0x58009300 0x40>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi2"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - hdmi: encoder@58060000 { - compatible = "ti,omap5-hdmi"; - reg = <0x58040000 0x200>, - <0x58040200 0x80>, - <0x58040300 0x80>, - <0x58060000 0x19000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma 76>; - dma-names = "audio_tx"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,omap5-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@2000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2000 0x4>, + <0x2010 0x4>, + <0x2014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + rfbi: encoder@0 { + compatible = "ti,omap5-rfbi"; + reg = <0 0x100>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>; + clock-names = "fck", "ick"; + }; + }; + + target-module@5000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5000 0x4>, + <0x5010 0x4>, + <0x5014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5000 0x1000>; + + dsi1: encoder@0 { + compatible = "ti,omap5-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@9000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x9000 0x4>, + <0x9010 0x4>, + <0x9014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x9000 0x1000>; + + dsi2: encoder@0 { + compatible = "ti,omap5-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@40000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000 0x40000>; + + hdmi: encoder@0 { + compatible = "ti,omap5-hdmi"; + reg = <0 0x200>, + <0x200 0x80>, + <0x300 0x80>, + <0x20000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi index 9f6c2b660ed3..0755e5864c4a 100644 --- a/arch/arm/boot/dts/ox810se.dtsi +++ b/arch/arm/boot/dts/ox810se.dtsi @@ -323,8 +323,8 @@ interrupt-controller; reg = <0 0x200>; #interrupt-cells = <1>; - valid-mask = <0xFFFFFFFF>; - clear-mask = <0>; + valid-mask = <0xffffffff>; + clear-mask = <0xffffffff>; }; timer0: timer@200 { diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index c9b327732063..90846a7655b4 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -240,8 +240,8 @@ reg = <0 0x200>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; - valid-mask = <0xFFFFFFFF>; - clear-mask = <0>; + valid-mask = <0xffffffff>; + clear-mask = <0xffffffff>; }; timer0: timer@200 { diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts index 2ad40e373194..8bade6bf395b 100644 --- a/arch/arm/boot/dts/pxa168-aspenite.dts +++ b/arch/arm/boot/dts/pxa168-aspenite.dts @@ -18,18 +18,16 @@ memory { reg = <0x00000000 0x04000000>; }; +}; - soc { - apb@d4000000 { - uart1: uart@d4017000 { - status = "okay"; - }; - twsi1: i2c@d4011000 { - status = "okay"; - }; - rtc: rtc@d4010000 { - status = "okay"; - }; - }; - }; +&uart1 { + status = "okay"; +}; + +&twsi1 { + status = "okay"; +}; + +&rtc { + status = "okay"; }; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 72f8cb60cb53..9a9e38245e88 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -55,27 +55,30 @@ interrupts = <13>; }; - uart1: uart@d4017000 { - compatible = "mrvl,mmp-uart"; + uart1: serial@d4017000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4017000 0x1000>; + reg-shift = <2>; interrupts = <27>; clocks = <&soc_clocks PXA168_CLK_UART0>; resets = <&soc_clocks PXA168_CLK_UART0>; status = "disabled"; }; - uart2: uart@d4018000 { - compatible = "mrvl,mmp-uart"; + uart2: serial@d4018000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4018000 0x1000>; + reg-shift = <2>; interrupts = <28>; clocks = <&soc_clocks PXA168_CLK_UART1>; resets = <&soc_clocks PXA168_CLK_UART1>; status = "disabled"; }; - uart3: uart@d4026000 { - compatible = "mrvl,mmp-uart"; + uart3: serial@d4026000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4026000 0x1000>; + reg-shift = <2>; interrupts = <29>; clocks = <&soc_clocks PXA168_CLK_UART2>; resets = <&soc_clocks PXA168_CLK_UART2>; diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts index 0f899e672e82..ce76158867c7 100644 --- a/arch/arm/boot/dts/pxa910-dkb.dts +++ b/arch/arm/boot/dts/pxa910-dkb.dts @@ -18,155 +18,153 @@ memory { reg = <0x00000000 0x10000000>; }; +}; - soc { - apb@d4000000 { - uart1: uart@d4017000 { - status = "okay"; - }; - twsi1: i2c@d4011000 { - status = "okay"; +&uart1 { + status = "okay"; +}; + +&twsi1 { + status = "okay"; - pmic: 88pm860x@34 { - compatible = "marvell,88pm860x"; - reg = <0x34>; - interrupts = <4>; - interrupt-parent = <&intc>; - interrupt-controller; - #interrupt-cells = <1>; + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; - marvell,88pm860x-irq-read-clr; - marvell,88pm860x-slave-addr = <0x11>; + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; - regulators { - BUCK1 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - BUCK2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - BUCK3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - LDO1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <2800000>; - regulator-boot-on; - regulator-always-on; - }; - LDO2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - LDO5 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO10 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO12 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - LDO13 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - LDO14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - rtc { - marvell,88pm860x-vrtc = <1>; - }; - touch { - marvell,88pm860x-gpadc-prebias = <1>; - marvell,88pm860x-gpadc-slot-cycle = <1>; - marvell,88pm860x-tsi-prebias = <6>; - marvell,88pm860x-pen-prebias = <16>; - marvell,88pm860x-pen-prechg = <2>; - marvell,88pm860x-resistor-X = <300>; - }; - backlights { - backlight-0 { - marvell,88pm860x-iset = <4>; - marvell,88pm860x-pwm = <3>; - }; - backlight-2 { - }; - }; - leds { - led0-red { - marvell,88pm860x-iset = <12>; - }; - led0-green { - marvell,88pm860x-iset = <12>; - }; - led0-blue { - marvell,88pm860x-iset = <12>; - }; - }; - }; - }; - rtc: rtc@d4010000 { - status = "okay"; + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; }; }; }; }; + +&rtc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index b3d6182d4de4..587a5e7f0702 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -67,27 +67,30 @@ status = "disabled"; }; - uart1: uart@d4017000 { - compatible = "mrvl,mmp-uart"; + uart1: serial@d4017000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4017000 0x1000>; + reg-shift = <2>; interrupts = <27>; clocks = <&soc_clocks PXA910_CLK_UART0>; resets = <&soc_clocks PXA910_CLK_UART0>; status = "disabled"; }; - uart2: uart@d4018000 { - compatible = "mrvl,mmp-uart"; + uart2: serial@d4018000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4018000 0x1000>; + reg-shift = <2>; interrupts = <28>; clocks = <&soc_clocks PXA910_CLK_UART1>; resets = <&soc_clocks PXA910_CLK_UART1>; status = "disabled"; }; - uart3: uart@d4036000 { - compatible = "mrvl,mmp-uart"; + uart3: serial@d4036000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4036000 0x1000>; + reg-shift = <2>; interrupts = <59>; clocks = <&soc_clocks PXA910_CLK_UART2>; resets = <&soc_clocks PXA910_CLK_UART2>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 8b79b4112ee1..2687c4e890ba 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -350,6 +350,7 @@ reg = <0x800000 0x4000>; gpio-controller; + gpio-ranges = <&tlmm_pinmux 0 0 90>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fa1852eed37b..bf6a03506b45 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -403,6 +403,7 @@ compatible = "qcom,apq8084-pinctrl"; reg = <0xfd510000 0x4000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 147>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 71bb25a8afc0..bfa9ce4c6e69 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -201,6 +201,7 @@ compatible = "qcom,ipq4019-pinctrl"; reg = <0x01000000 0x300000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 100>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 16c0da97932c..4021f661cd11 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -119,6 +119,7 @@ reg = <0x800000 0x4000>; gpio-controller; + gpio-ranges = <&qcom_pinmux 0 0 69>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 356e9535f7a6..347b4f7d7889 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -128,6 +128,7 @@ msmgpio: pinctrl@800000 { compatible = "qcom,mdm9615-pinctrl"; gpio-controller; + gpio-ranges = <&msmgpio 0 0 88>; #gpio-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index ec5cbc468bd3..480fc08cbe8e 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -115,6 +115,7 @@ reg = <0x800000 0x4000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 173>; #gpio-cells = <2>; interrupts = <0 16 0x4>; interrupt-controller; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index f2aeaccdc1ad..172ea3c70eac 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -107,6 +107,7 @@ msmgpio: pinctrl@800000 { compatible = "qcom,msm8960-pinctrl"; gpio-controller; + gpio-ranges = <&msmgpio 0 0 152>; #gpio-cells = <2>; interrupts = <0 16 0x4>; interrupt-controller; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 3487daf98e81..32b474bfeec3 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -12,6 +12,7 @@ aliases { serial0 = &blsp1_uart1; + serial1 = &blsp2_uart10; }; chosen { @@ -355,6 +356,57 @@ bias-disable; }; }; + + bt_pin: bt { + hostwake { + pins = "gpio42"; + function = "gpio"; + }; + + devwake { + pins = "gpio62"; + function = "gpio"; + }; + + shutdown { + pins = "gpio41"; + function = "gpio"; + }; + }; + + blsp2_uart10_pin_a: blsp2-uart10-pin-active { + tx { + pins = "gpio53"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio54"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-pull-up; + }; + + cts { + pins = "gpio55"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-pull-up; + }; + + rts { + pins = "gpio56"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhci@f9824900 { @@ -418,6 +470,25 @@ }; }; + serial@f9960000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart10_pin_a>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_pin>; + + host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>; + }; + }; + i2c@f9967000 { status = "ok"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 450b8321e0a6..611bae9fe66b 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -260,6 +260,31 @@ }; &soc { + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; + sdhci@f9824900 { status = "ok"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 4b161b809dd5..2ea2308d91b3 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -715,6 +715,15 @@ status = "disabled"; }; + blsp2_uart10: serial@f9960000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9960000 0x1000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + sdhci@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; @@ -925,6 +934,7 @@ compatible = "qcom,msm8974-pinctrl"; reg = <0xfd510000 0x4000>; gpio-controller; + gpio-ranges = <&msmgpio 0 0 146>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index fe1a4aa4d7cb..2562cc9b5356 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -41,6 +41,9 @@ bank-width = <4>; device-width = <1>; + clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 75b2796ebfca..0a567d8ebc66 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -467,11 +467,12 @@ #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xfcfe0438 4>; - clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>; + clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>, <&b_clk>, <&b_clk>; clock-indices = < R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3 + R7S72100_CLK_SPIBSC0 R7S72100_CLK_SPIBSC1 >; - clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3"; + clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "spibsc0", "spibsc1"; }; mstp10_clks: mstp10_clks@fcfe043c { diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index a5351ddbf506..b088e8e351d5 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -157,11 +157,8 @@ &cpu0 { cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1950000 1115000 - 1462500 995000 - >; + operating-points = <1950000 1115000>, /* kHz uV */ + <1462500 995000>; voltage-tolerance = <1>; /* 1% */ }; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 1cd19a569bd0..e8b340bb99bc 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -1669,9 +1669,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index 1c82dd0abd76..def840b8b2d3 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -1655,9 +1655,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts index 2aeebfc9e4f1..92aa26ba423c 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -108,6 +108,12 @@ }; }; +&lcd_panel { + status = "disabled"; + + /delete-node/ port; +}; + &pfc { can1_pins: can1 { groups = "can1_data_b"; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 58d369ad8279..b15b1b088a32 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -30,6 +30,7 @@ /dts-v1/; #include "r8a7745-iwg22m.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E"; @@ -78,6 +79,49 @@ gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; + + vccq_panel: regulator-vccq-panel { + compatible = "regulator-fixed"; + regulator-name = "Panel VccQ"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + enable-active-high; + }; + + backlight_lcd: backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + + lcd_panel: lcd { + compatible = "edt,etm043080dh6gp"; + power-supply = <&vccq_panel>; + backlight = <&backlight_lcd>; + + port { + lcd_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; }; &avb { @@ -127,6 +171,39 @@ status = "okay"; clock-frequency = <400000>; + stmpe811@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupt-parent = <&gpio4>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; #sound-dai-cells = <0>; @@ -149,11 +226,21 @@ function = "avb"; }; + backlight_pins: backlight { + groups = "tpu_to3_c"; + function = "tpu"; + }; + can0_pins: can0 { groups = "can0_data"; function = "can0"; }; + du0_pins: du0 { + groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out"; + function = "du0"; + }; + hscif1_pins: hscif1 { groups = "hscif1_data", "hscif1_ctrl"; function = "hscif1"; @@ -229,6 +316,12 @@ shared-pin; }; +&tpu { + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 3f88a7e34af2..7ab58d8bb740 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -1506,11 +1506,12 @@ du: display@feb00000 { compatible = "renesas,du-r8a7745"; reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 6efcef1670e1..f55153192276 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -942,9 +942,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 097fd9317c6e..69745def44d4 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -674,6 +674,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index a315ba749aa4..4138efb2766d 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -203,6 +203,7 @@ interrupt-parent = <&irqc0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 334ba19769b9..e5ef9fd4284a 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1719,6 +1719,8 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>; clock-names = "du.0", "du.1", "du.2"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 2b096d5e06fb..687167b70cb6 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -633,6 +633,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index f9ece7ab2010..a8e0335148a5 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -307,6 +307,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 59a55e87fcc6..6e5bd86731cd 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1681,9 +1681,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 39af16caa2ae..4627eefa502b 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -852,9 +852,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 22ca7cd1e7d2..cfe06a74ce89 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -591,6 +591,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index eef035c4d983..dadbda16161b 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1341,9 +1341,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f79fce74cd9c..935935c1dbac 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -343,6 +343,7 @@ interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 2c16ad854300..9aaa96ea9943 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -394,6 +394,7 @@ interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 05ef79c6ed7f..2c9e7a1ebfec 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1356,6 +1356,8 @@ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index fb3cf005cc90..2ff9f152d29b 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -319,7 +319,7 @@ bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; - default-sample-phase = <90>; + rockchip,default-sample-phase = <90>; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index cf36e25195b4..781ac7583522 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -54,7 +54,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -101,7 +101,7 @@ #clock-cells = <0>; }; - bus_intmem@10080000 { + bus_intmem: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x2000>; #address-cells = <1>; @@ -263,7 +263,7 @@ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - default-sample-phase = <158>; + rockchip,default-sample-phase = <158>; disable-wp; dmas = <&pdma 12>; dma-names = "rx-tx"; @@ -281,8 +281,6 @@ compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s"; reg = <0x10220000 0x4000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; dmas = <&pdma 0>, <&pdma 1>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 3d1b02f45ffd..b599394d149d 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -156,14 +156,12 @@ compatible = "rockchip,rk3066-i2s"; reg = <0x10118000 0x2000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 4>, <&dmac1_s 5>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <8>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; @@ -174,14 +172,12 @@ compatible = "rockchip,rk3066-i2s"; reg = <0x1011a000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 6>, <&dmac1_s 7>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; @@ -192,14 +188,12 @@ compatible = "rockchip,rk3066-i2s"; reg = <0x1011c000 0x2000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; + clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 9>, <&dmac1_s 10>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index ad1afd403052..66a0ff196eb1 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -58,20 +58,25 @@ lvds-encoder { compatible = "ti,sn75lvds83", "lvds-encoder"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - lvds_in_vop0: endpoint { - remote-endpoint = <&vop0_out_lvds>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_in_vop0: endpoint { + remote-endpoint = <&vop0_out_lvds>; + }; }; - }; - port@1 { - reg = <1>; - lvds_out_panel: endpoint { - remote-endpoint = <&panel_in_lvds>; + port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; }; }; }; @@ -465,7 +470,7 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; - vmmcq-supply = <&vccio_wl>; + vqmmc-supply = <&vccio_wl>; #address-cells = <1>; #size-cells = <0>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 10ede65d90f3..2298a8d840ba 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -166,14 +166,12 @@ compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s"; reg = <0x1011a000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 6>, <&dmac1_s 7>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; @@ -184,8 +182,8 @@ compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; reg = <0x1011e000 0x2000>; #sound-dai-cells = <0>; - clock-names = "hclk", "mclk"; - clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; dmas = <&dmac1_s 8>; dma-names = "tx"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 4e90efdc9630..06172ebbf0ce 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -95,7 +95,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -152,8 +152,6 @@ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100b0000 0x4000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>; dmas = <&pdma 14>, <&pdma 15>; @@ -167,8 +165,6 @@ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100c0000 0x4000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>; dmas = <&pdma 11>, <&pdma 12>; @@ -193,8 +189,6 @@ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100e0000 0x4000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>; dmas = <&pdma 0>, <&pdma 1>; @@ -698,7 +692,7 @@ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; bus-width = <8>; - default-sample-phase = <158>; + rockchip,default-sample-phase = <158>; fifo-depth = <0x100>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; @@ -718,7 +712,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy0_otg>; phy-names = "usb2-phy"; status = "disabled"; @@ -729,7 +722,6 @@ reg = <0x30080000 0x20000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy0>; - clock-names = "usbhost", "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -740,7 +732,6 @@ reg = <0x300a0000 0x20000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy0>; - clock-names = "usbhost", "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -751,7 +742,6 @@ reg = <0x300c0000 0x20000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST1>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_otg>; phy-names = "usb"; status = "disabled"; @@ -762,7 +752,6 @@ reg = <0x300e0000 0x20000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST1>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_otg>; phy-names = "usb"; status = "disabled"; @@ -775,7 +764,6 @@ clocks = <&cru HCLK_HOST2>, <&u2phy1>; phys = <&u2phy1_host>; phy-names = "usb"; - clock-names = "usbhost", "utmi"; status = "disabled"; }; @@ -784,7 +772,6 @@ reg = <0x30120000 0x20000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST2>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_host>; phy-names = "usb"; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 80080767c365..be695b8c1f67 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -4,6 +4,7 @@ #include "rk3288-evb.dtsi" / { + model = "Rockchip RK3288 EVB ACT8846"; compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288"; vcc_lcd: vcc-lcd { diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 16788209625b..42384ea4ca21 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -4,6 +4,7 @@ #include "rk3288-evb.dtsi" / { + model = "Rockchip RK3288 EVB RK808"; compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 1574383fd2dc..8c38bda21a7c 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -234,6 +234,7 @@ }; &saradc { + vref-supply = <&vcc_18>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index a6ffc381abaa..a258c7ae5329 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -9,6 +9,7 @@ #include "rk3288.dtsi" / { + model = "Netxeon R89"; compatible = "netxeon,r89", "rockchip,rk3288"; memory@0 { diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 312582c1bd37..acfaa12ec239 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -276,6 +276,7 @@ }; vccio_sd: LDO_REG5 { + regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index ba06e9f97ddc..385dd59393e1 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -78,6 +78,18 @@ vin-supply = <&vcc_io>; }; + vcc50_hdmi: vcc50-hdmi { + compatible = "regulator-fixed"; + regulator-name = "vcc50_hdmi"; + enable-active-high; + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */ + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + vusb1_5v: vusb1-5v { compatible = "regulator-fixed"; regulator-name = "vusb1_5v"; @@ -150,7 +162,7 @@ }; &hdmi { - ddc-i2c-bus = <&i2c2>; + ddc-i2c-bus = <&i2c5>; status = "okay"; }; @@ -286,15 +298,15 @@ }; }; - vcc10_lcd: LDO_REG6 { - regulator-name = "vcc10_lcd"; + vdd10_lcd: LDO_REG6 { + regulator-name = "vdd10_lcd"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; + regulator-suspend-microvolt = <1000000>; }; }; @@ -347,7 +359,7 @@ }; }; -&i2c2 { +&i2c5 { status = "okay"; }; @@ -446,6 +458,12 @@ }; }; + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 9beb662166aa..0cd88774db95 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -155,7 +155,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -420,6 +420,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 1>, <&dmac_peri 2>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; status = "disabled"; @@ -433,6 +435,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 3>, <&dmac_peri 4>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; status = "disabled"; @@ -459,6 +463,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 7>, <&dmac_peri 8>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart3_xfer>; status = "disabled"; @@ -472,6 +478,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 9>, <&dmac_peri 10>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart4_xfer>; status = "disabled"; @@ -601,7 +609,6 @@ reg = <0x0 0xff500000 0x0 0x100>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_USBHOST0>; - clock-names = "usbhost"; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; @@ -644,7 +651,6 @@ reg = <0x0 0xff5c0000 0x0 0x100>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HSIC>; - clock-names = "usbhost"; status = "disabled"; }; @@ -718,7 +724,7 @@ status = "disabled"; }; - bus_intmem@ff700000 { + bus_intmem: sram@ff700000 { compatible = "mmio-sram"; reg = <0x0 0xff700000 0x0 0x18000>; #address-cells = <1>; @@ -730,7 +736,7 @@ }; }; - sram@ff720000 { + pmu_sram: sram@ff720000 { compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; reg = <0x0 0xff720000 0x0 0x1000>; }; @@ -946,8 +952,8 @@ compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; reg = <0x0 0xff8b0000 0x0 0x10000>; #sound-dai-cells = <0>; - clock-names = "hclk", "mclk"; - clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; + clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>; + clock-names = "mclk", "hclk"; dmas = <&dmac_bus_s 3>; dma-names = "tx"; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -962,12 +968,10 @@ reg = <0x0 0xff890000 0x0 0x10000>; #sound-dai-cells = <0>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; rockchip,playback-channels = <8>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 241f43e29c77..f9fcb7e9657b 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -32,7 +32,7 @@ spi1 = &spi1; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -91,7 +91,7 @@ status = "disabled"; }; - L2: l2-cache-controller@10138000 { + L2: cache-controller@10138000 { compatible = "arm,pl310-cache"; reg = <0x10138000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 1fd06e7cb983..f9cfe2c80791 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -85,7 +85,7 @@ #clock-cells = <0>; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -102,7 +102,7 @@ }; }; - bus_intmem@10080000 { + bus_intmem: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x2000>; #address-cells = <1>; @@ -120,7 +120,6 @@ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 6>, <&pdma 7>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart2m0_xfer>; status = "disabled"; @@ -136,7 +135,6 @@ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 4>, <&pdma 5>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; status = "disabled"; @@ -152,7 +150,6 @@ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 2>, <&pdma 3>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "disabled"; @@ -208,7 +205,6 @@ clock-names = "spiclk", "apb_pclk"; dmas = <&pdma 8>, <&pdma 9>; dma-names = "tx", "rx"; - #dma-cells = <2>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -370,7 +366,6 @@ reg = <0x1038c000 0x100>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; - clock-frequency = <1000000>; clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; clock-names = "saradc", "apb_pclk"; status = "disabled"; @@ -499,7 +494,6 @@ reg = <0x30140000 0x20000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy>; - clock-names = "usbhost", "utmi"; phys = <&u2phy_host>; phy-names = "usb"; status = "disabled"; @@ -510,7 +504,6 @@ reg = <0x30160000 0x20000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy>; - clock-names = "usbhost", "utmi"; phys = <&u2phy_host>; phy-names = "usb"; status = "disabled"; @@ -527,7 +520,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 326b39328b58..6763423d64b8 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -686,6 +686,14 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k 0>; }; + + watchdog: watchdog@ffffff80 { + compatible = "microchip,sam9x60-wdt"; + reg = <0xffffff80 0x24>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2012b7407c60..ab550d69db91 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -695,7 +695,7 @@ }; rtc: rtc@f80480b0 { - compatible = "atmel,at91rm9200-rtc"; + compatible = "atmel,sama5d2-rtc"; reg = <0xf80480b0 0x30>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 203d40be70a5..f11b018e9173 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -159,8 +159,11 @@ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>, <&dma0 2 AT91_DMA_CFG_PER_ID(8)>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi0_clk>; @@ -174,8 +177,11 @@ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>, <&dma0 2 AT91_DMA_CFG_PER_ID(10)>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi1_clk>; @@ -357,8 +363,11 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi2_clk>; @@ -639,6 +648,12 @@ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ }; + + pinctrl_i2c0_gpio: i2c0-gpio { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c1 { @@ -647,6 +662,12 @@ <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ }; + + pinctrl_i2c1_gpio: i2c1-gpio { + atmel,pins = + <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c2 { @@ -655,6 +676,12 @@ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ }; + + pinctrl_i2c2_gpio: i2c2-gpio { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; isi { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 6ab27a7b388d..c9c0316b5b0e 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -458,8 +458,11 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(3))>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; @@ -477,8 +480,11 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; @@ -519,8 +525,11 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(7))>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; @@ -884,7 +893,7 @@ }; rtc@fc0686b0 { - compatible = "atmel,at91rm9200-rtc"; + compatible = "atmel,sama5d4-rtc"; reg = <0xfc0686b0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; @@ -1122,6 +1131,12 @@ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; + + pinctrl_i2c0_gpio: i2c0-gpio { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c1 { @@ -1130,6 +1145,12 @@ <AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */ AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */ }; + + pinctrl_i2c1_gpio: i2c1-gpio { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c2 { @@ -1138,6 +1159,12 @@ <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */ AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */ }; + + pinctrl_i2c2_gpio: i2c2-gpio { + atmel,pins = + <AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; isi { diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 1916f31a30ff..5a8d92a061df 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -25,12 +25,9 @@ cpus { cpu@0 { cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1196000 1315000 - 598000 1175000 - 398667 1065000 - >; + operating-points = <1196000 1315000>, /* kHz uV */ + < 598000 1175000>, + < 398667 1065000>; voltage-tolerance = <1>; /* 1% */ }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 2a86e72d9791..3b8571b8b412 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -431,8 +431,8 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; - clocks = <&l4_mp_clk>; - clock-names = "stmmaceth"; + clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; + clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; @@ -451,8 +451,8 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; - clocks = <&l4_mp_clk>; - clock-names = "stmmaceth"; + clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; + clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; @@ -471,8 +471,8 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; - clocks = <&l4_mp_clk>; - clock-names = "stmmaceth"; + clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; + clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts index 9bd9e04c7361..9aa897b79544 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -16,11 +16,11 @@ partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x1C00000>; + reg = <0x0 0x02000000>; }; partition@1c00000 { label = "Root Filesystem - JFFS2"; - reg = <0x1C00000 0x6400000>; + reg = <0x02000000 0x06000000>; }; }; }; diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 14d4d8617d75..3cd6ee6d50e0 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -314,13 +314,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi@a0351000 { + dsi-controller@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0352000 { + dsi-controller@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0353000 { + dsi-controller@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi index c72aa250bf6f..67bc69e67b33 100644 --- a/arch/arm/boot/dts/ste-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -261,13 +261,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi@a0351000 { + dsi-controller@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0352000 { + dsi-controller@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0353000 { + dsi-controller@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 6671f74c9f03..3e10da3f8fd3 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1097,7 +1097,7 @@ ranges; status = "disabled"; - dsi0: dsi@a0351000 { + dsi0: dsi-controller@a0351000 { compatible = "ste,mcde-dsi"; reg = <0xa0351000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; @@ -1105,7 +1105,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi1: dsi@a0352000 { + dsi1: dsi-controller@a0352000 { compatible = "ste,mcde-dsi"; reg = <0xa0352000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; @@ -1113,7 +1113,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi2: dsi@a0353000 { + dsi2: dsi-controller@a0353000 { compatible = "ste,mcde-dsi"; reg = <0xa0353000 0x1000>; /* This DSI port only has the Low Power / Energy Save clock */ diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index e32d0c36feb8..b8fd8f18ba16 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -199,7 +199,7 @@ mcde@a0350000 { status = "okay"; - dsi@a0351000 { + dsi-controller@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi index e024520f4d47..de82b9db956f 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi @@ -66,7 +66,7 @@ mcde@a0350000 { status = "okay"; - dsi@a0351000 { + dsi-controller@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi index cb3677f0a1cb..9f285c7cf914 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -45,7 +45,7 @@ mcde@a0350000 { status = "okay"; - dsi@a0351000 { + dsi-controller@a0351000 { panel { compatible = "sony,acx424akp"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts new file mode 100644 index 000000000000..292ed5286652 --- /dev/null +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Devicetree for the Samsung XCover 2 GT-S7710 also known as Skomer. + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-ab8505.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung XCover 2 (GT-S7710)"; + compatible = "samsung,skomer", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + /* TI TXS0206 level translator for 2.9 V */ + sd_level_translator: regulator-gpio { + compatible = "regulator-fixed"; + + /* GPIO87 EN */ + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-name = "sd-level-translator"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_level_translator_default>; + }; + + /* External LDO MIC5366-3.3YMT for eMMC */ + ldo_3v3_reg: regulator-gpio-ldo-3v3 { + compatible = "regulator-fixed"; + regulator-name = "en-3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_ldo_en_default_mode>; + }; + + wlan_en: regulator-gpio-wlan-en { + compatible = "regulator-fixed"; + regulator-name = "wl-reg-on"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + startup-delay-us = <200000>; + /* GPIO215 WLAN_EN */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default_mode>; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default_mode>; + + button-home { + linux,code = <KEY_HOME>; + label = "HOME"; + /* GPIO91 */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "VOL+"; + /* GPIO67 */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "VOL-"; + /* GPIO92 */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + button-menu { + linux,code = <KEY_MENU>; + label = "MENU"; + /* GPIO204 */ + gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + }; + button-back { + linux,code = <KEY_BACK>; + label = "BACK"; + /* GPIO205 */ + gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; + }; + }; + + /* + * FIXME: this is not quite GPIO backlight. This is a + * KTD253 one-wire GPIO-controlled backlight. It can + * work as a GPIO backlight. + */ + gpio_bl: backlight { + compatible = "gpio-backlight"; + /* GPIO 69 */ + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_backlight_default_mode>; + }; + + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + /* TODO: this should be used by the NCP6914 Camera power management unit */ + }; + + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + #address-cells = <1>; + #size-cells = <0>; + /* TODO: this should be used by the ALPS HSCDTD008A compass sensor */ + }; + + soc { + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + /* All direction control is used */ + st,sig-dir-cmd; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-pin-fbclk; + full-pwr-cycle; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&sd_level_translator>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_1_default>; + pinctrl-1 = <&mc0_a_1_sleep>; + status = "okay"; + }; + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + vmmc-supply = <&wlan_en>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + /* GPIO216 WL_HOST_WAKE */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_mode>; + }; + }; + + // eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&ldo_3v3_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + + status = "okay"; + }; + + /* GBF (Bluetooth) UART */ + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + + /* FIXME: not quite working yet, probably needs regulators */ + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_mode>; + }; + }; + + /* GPF UART */ + uart@80121000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + }; + + /* Debugging console UART connected to AB8505 USB */ + uart@80007000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + prcmu@80157000 { + ab8505 { + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8505-regulators { + ab8500_ldo_aux1 { + /* Used for VDD for sensors */ + regulator-name = "AUX1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux2 { + /* Supplies the Cypress TMA140 touchscreen only with 3.3V */ + regulator-name = "AUX2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux3 { + /* Used for voltage for external MMC/SD card */ + regulator-name = "AUX3"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux4 { + regulator-name = "AUX4"; + /* Hammer to 3.0V for the display */ + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ab8500_ldo_aux5 { + regulator-name = "AUX5"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <2790000>; + regulator-always-on; + }; + + ab8500_ldo_aux6 { + regulator-name = "AUX6"; + /* Hammer to 1.8V for the display */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux8 { + /* Mostly VIO for sensors */ + regulator-name = "AUX8"; + }; + }; + }; + }; + + /* I2C0 */ + i2c@80004000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@44 { + compatible = "sharp,gp2ap002s00f"; + clock-frequency = <400000>; + reg = <0x44>; + + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gp2ap002_skomer_default>; + sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>; + }; + }; + + + /* I2C2 */ + i2c@80128000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + accel@18 { + compatible = "bosch,bma254"; + clock-frequency = <400000>; + reg = <0x18>; + + /* GPIO224 used as "smart alert" interrupt */ + interrupt-parent = <&gpio7>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&bma254_skomer_default>; + }; + }; + + /* I2C3 */ + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + /* TODO: this should be used by the Cypress TMA140 touchscreen */ + }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dsi_default_mode>; + + dsi-controller@a0351000 { + panel { + /* NT35510-based Hydis HVA40WV1 */ + compatible = "hydis,hva40wv1", "novatek,nt35510"; + reg = <0>; + /* v_lcd_3v0 2.3-4.8V */ + vdd-supply = <&ab8500_ldo_aux4_reg>; + /* v_lcd_1v8 1.65-3.3V */ + vddi-supply = <&ab8500_ldo_aux6_reg>; + /* GPIO 139 */ + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&display_default_mode>; + backlight = <&gpio_bl>; + }; + }; + }; + }; +}; + +&pinctrl { + /* + * This extends the MC0 default config to include DAT32DIR + * which is used by this machine. If we don't do this the + * SD card does not work. + */ + sdi0 { + mc0_a_1_default { + default_mux { + function = "mc0"; + /* This machine uses the DAT31 pin */ + groups = "mc0_a_1", "mc0dat31dir_a_1"; + }; + default_cfg5 { + pins = "GPIO21_AB3"; /* DAT31DIR */ + ste,config = <&out_hi>; + }; + }; + }; + + mcde { + dsi_default_mode: dsi_default { + default_mux1 { + /* Mux in VSI0 used for DSI TE */ + function = "lcd"; + groups = "lcdvsi0_a_1"; /* VSI0 for LCD */ + }; + default_cfg1 { + pins = "GPIO68_E1"; /* VSI0 */ + ste,config = <&in_nopull>; + }; + }; + }; + + /* Two GPIO lines used by the display */ + display { + display_default_mode: display_default { + skomer_cfg1 { + /* + * OLED DETECT or check_pba, this appears to be high + * on "PBA" which I guess is "prototype board A". + */ + pins = "GPIO93_B7"; + ste,config = <&gpio_in_nopull>; + }; + skomer_cfg2 { + pins = "GPIO139_C9"; + /* + * MIPI_DSI0_RESET_N resets the display, leave high + * (de-asserted) so we only assert reset explicitly + * from the display driver. + */ + ste,config = <&gpio_out_hi>; + }; + }; + }; + backlight { + gpio_backlight_default_mode: backlight_default { + skomer_cfg1 { + pins = "GPIO69_E2"; /* LCD_BL_CTRL */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO that enables the 2.9V SD card level translator */ + sd-level-translator { + sd_level_translator_default: sd_level_translator_default { + /* level shifter on GPIO87 */ + skomer_cfg1 { + pins = "GPIO87_B3"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the eMMC */ + emmc-ldo { + emmc_ldo_en_default_mode: emmc_ldo_default { + /* LDO enable on GPIO223 */ + skomer_cfg1 { + pins = "GPIO223_AH9"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO keys */ + gpio-keys { + gpio_keys_default_mode: gpio_keys_default { + skomer_cfg1 { + pins = "GPIO67_G2", /* VOL UP */ + "GPIO91_B6", /* HOME */ + "GPIO92_D6", /* VOL DOWN */ + "GPIO204_AF23", /* MENU */ + "GPIO205_AG23"; /* BACK */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + /* Interrupt line for BMA254 */ + bma254 { + bma254_skomer_default: bma254_skomer { + skomer_cfg1 { + pins = "GPIO224_AG9"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + /* Interrupt line for light/proximity sensor GP2AP002 */ + gp2ap002 { + gp2ap002_skomer_default: gp2ap002_skomer { + skomer_cfg1 { + pins = "GPIO146_D13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for NCP6914 */ + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + skomer_cfg1 { + pins = "GPIO143_D12", "GPIO144_B13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for ALPS HSCD compass */ + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + skomer_cfg1 { + pins = "GPIO151_B17", "GPIO152_D16"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + wlan { + wlan_default_mode: wlan_default { + skomer_cfg1 { + pins = "GPIO216_AG12"; + ste,config = <&gpio_in_pd>; + }; + }; + wlan_en_default_mode: wlan_en_default { + skomer_cfg2 { + pins = "GPIO215_AH13"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + bluetooth { + bluetooth_default_mode: bluetooth_default { + skomer_cfg1 { + pins = "GPIO199_AH23", "GPIO222_AJ9"; + ste,config = <&gpio_out_lo>; + }; + skomer_cfg2 { + pins = "GPIO97_D9"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + vibrator { + vibrator_default: vibrator_default { + skomer_cfg1 { + pins = "GPIO195_AG28"; /* MOT_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; +}; + +&ab8505_gpio { + /* Hog a few default settings */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio_default>; + + gpio { + gpio_default: gpio_default { + skomer_mux { + /* Change unused pins to GPIO mode */ + function = "gpio"; + groups = "gpio3_a_1", /* default: SysClkReq4 */ + "gpio14_a_1"; /* default: PWMOut1 */ + }; + skomer_cfg1 { + pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4"; + bias-disable; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index fcc804e3c158..4ea3f98dd275 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -165,7 +165,7 @@ interrupts = <8 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpioi>; - stmfx_pinctrl: stmfx-pin-controller { + stmfx_pinctrl: pinctrl { compatible = "st,stmfx-0300-pinctrl"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 0237d4ddaa92..73c07f0dfad2 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -162,6 +162,40 @@ }; }; + ethernet0_rmii_pins_a: rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF0)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ @@ -685,6 +719,26 @@ }; }; + + sai2a_pins_b: sai2a-2 { + pins1 { + pinmux = <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('D', 13, AF10)>; /* SAI2_SCK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_b: sai2a-sleep-3 { + pins { + pinmux = <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */ + }; + }; + sai2b_pins_a: sai2b-0 { pins1 { pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ @@ -1000,6 +1054,19 @@ }; }; + usart3_pins_a: usart3-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ + bias-disable; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ @@ -1040,6 +1107,32 @@ bias-disable; }; }; + + uart8_pins_a: uart8-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */ + bias-disable; + }; + }; + + usbotg_hs_pins_a: usbotg-hs-0 { + pins { + pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */ + }; + }; + + usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */ + <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */ + }; + }; }; &pinctrl_z { diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index fb41d0778b00..3ea05ba48215 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -17,6 +17,7 @@ cpu0: cpu@0 { compatible = "arm,cortex-a7"; + clock-frequency = <650000000>; device_type = "cpu"; reg = <0>; }; @@ -483,6 +484,7 @@ resets = <&rcc I2C1_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -496,6 +498,7 @@ resets = <&rcc I2C2_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -509,6 +512,7 @@ resets = <&rcc I2C3_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -522,6 +526,7 @@ resets = <&rcc I2C5_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -959,6 +964,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc DMA1>; + resets = <&rcc DMA1_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -976,6 +982,7 @@ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc DMA2>; + resets = <&rcc DMA2_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -989,6 +996,7 @@ dma-masters = <&dma1 &dma2>; dma-channels = <16>; clocks = <&rcc DMAMUX>; + resets = <&rcc DMAMUX_R>; }; adc: adc@48003000 { @@ -1044,7 +1052,7 @@ }; usbotg_hs: usb-otg@49000000 { - compatible = "snps,dwc2"; + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; reg = <0x49000000 0x10000>; clocks = <&rcc USBO_K>; clock-names = "otg"; @@ -1055,6 +1063,7 @@ g-np-tx-fifo-size = <32>; g-tx-fifo-size = <128 128 64 64 64 64 32 32>; dr_mode = "otg"; + usb33d-supply = <&usb33>; status = "disabled"; }; @@ -1280,6 +1289,7 @@ reg = <0x58000000 0x1000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc MDMA>; + resets = <&rcc MDMA_R>; #dma-cells = <5>; dma-channels = <32>; dma-requests = <48>; @@ -1369,10 +1379,12 @@ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx", + "eth-ck", "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, + <&rcc ETHCK_K>, <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; @@ -1473,6 +1485,7 @@ resets = <&rcc I2C4_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -1508,6 +1521,7 @@ resets = <&rcc I2C6_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi index 2d759fc6015c..6d9ab08667fc 100644 --- a/arch/arm/boot/dts/stm32mp153.dtsi +++ b/arch/arm/boot/dts/stm32mp153.dtsi @@ -10,6 +10,7 @@ cpus { cpu1: cpu@1 { compatible = "arm,cortex-a7"; + clock-frequency = <650000000>; device_type = "cpu"; reg = <1>; }; diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index cbfa4075907e..425175f7d83c 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -135,10 +135,6 @@ #interrupt-cells = <2>; status = "okay"; - st,main-control-register = <0x04>; - st,vin-control-register = <0xc0>; - st,usb-control-register = <0x30>; - regulators { compatible = "st,stpmic1-regulators"; @@ -173,7 +169,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; - st,mask_reset; regulator-initial-mode = <0>; regulator-over-current-protection; }; @@ -213,8 +208,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; interrupt-parent = <&pmic>; }; @@ -240,7 +233,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -300,7 +292,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts new file mode 100644 index 000000000000..af99e132e1b1 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019 Marek Vasut <marex@denx.de> + */ + +#include "stm32mp157c-dhcom-som.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)"; + compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + ethernet0 = ðernet0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + display_bl: display-bl { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + }; + + panel { + compatible = "edt,etm0700g0edh6"; + backlight = <&display_bl>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + sound { + compatible = "audio-graph-card"; + routing = + "MIC_IN", "Capture", + "Capture", "Mic Bias", + "Playback", "HP_OUT"; + dais = <&sai2a_port &sai2b_port>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default"; + pinctrl-0 = <&cec_pins_a>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + st,eth-ref-clk-sel; + phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <&v3v3>; + VDDIO-supply = <&vdd>; + + sgtl5000_port: port { + #address-cells = <1>; + #size-cells = <0>; + + sgtl5000_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + sgtl5000_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + + }; + + polytouch@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpiog>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + linux,wakeup; + }; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_b>; + pinctrl-1 = <<dc_pins_sleep_b>; + status = "okay"; + + port { + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&sgtl5000_tx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&sgtl5000_rx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; +}; + +&timers2 { + /* spare dmas for other usage (un-delete to enable pwm capture) */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + pwm2: pwm { + pinctrl-0 = <&pwm2_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@1 { + status = "okay"; + }; +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi new file mode 100644 index 000000000000..f81dc3134135 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2019 Marek Vasut <marex@denx.de> + */ +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + memory@c0000000 { + device_type = "memory"; + reg = <0xC0000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; +}; + +&adc { + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; + + adc1: adc@0 { + st,min-sample-time-nsecs = <5000>; + st,adc-channels = <0>; + status = "okay"; + }; + + adc2: adc@100 { + st,adc-channels = <1>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&dac { + pinctrl-names = "default"; + pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; + vref-supply = <&vdda>; + status = "okay"; + + dac1: dac@1 { + status = "okay"; + }; + dac2: dac@2 { + status = "okay"; + }; +}; + +&dts { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + touchscreen@49 { + compatible = "ti,tsc2004"; + reg = <0x49>; + vio-supply = <&v3v3>; + interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: mx66l51235l@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 1fc43251d697..9d2592db630c 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -130,10 +130,12 @@ }; &i2c4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; @@ -218,8 +220,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -241,7 +241,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -313,7 +312,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; @@ -334,7 +334,7 @@ st,neg-edge; bus-width = <8>; vmmc-supply = <&v3v3>; - vqmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; mmc-ddr-3_3v; status = "okay"; }; @@ -355,6 +355,10 @@ status = "okay"; }; +&usbotg_hs { + vbus-supply = <&vbus_otg>; +}; + &usbphyc_port0 { phy-supply = <&vdd_usb>; vdda1v1-supply = <®11>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 228e35e16884..8a4c7ff31a92 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -174,8 +174,9 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -210,7 +211,7 @@ interrupt-parent = <&gpioi>; vdd-supply = <&v3v3>; - stmfx_pinctrl: stmfx-pin-controller { + stmfx_pinctrl: pinctrl { compatible = "st,stmfx-0300-pinctrl"; gpio-controller; #gpio-cells = <2>; @@ -218,7 +219,7 @@ #interrupt-cells = <2>; gpio-ranges = <&stmfx_pinctrl 0 0 24>; - joystick_pins: joystick { + joystick_pins: joystick-pins { pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; bias-pull-down; }; @@ -227,8 +228,9 @@ }; &i2c5 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -353,7 +355,8 @@ }; &usbotg_hs { - dr_mode = "peripheral"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; status = "okay"; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index f6672e87aef3..d946e0a02f5c 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -216,10 +216,12 @@ }; &i2c4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; @@ -304,8 +306,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -328,7 +328,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -479,7 +478,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,neg-edge; bus-width = <4>; vmmc-supply = <&v3v3>; diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts new file mode 100644 index 000000000000..e9ef97c9c893 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright 2019 Ondrej Jirman <megous@megous.com> + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "PocketBook Touch Lux 3"; + compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ + default-state = "on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + label = "GPIO Keys"; + + key-right { + label = "Right"; + linux,code = <KEY_RIGHT>; + gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */ + }; + + key-left { + label = "Left"; + linux,code = <KEY_LEFT>; + gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */ + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vdd-1v8-nor-ctp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_1v8_nor: regulator-nor { + compatible = "regulator-fixed"; + regulator-name = "vdd-nor"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_1v8>; + regulator-always-on; + }; + + reg_1v8_ctp: regulator-ctp { + compatible = "regulator-fixed"; + regulator-name = "vdd-ctp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_1v8>; + }; + + reg_3v3_mmc0: regulator-mmc0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-mmc0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */ + vin-supply = <®_vcc3v3>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + status = "okay"; + + /* Touchpanel is connected here. */ +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-200 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <200000>; + }; + + button-400 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_3v3_mmc0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pc_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + /* We need this otherwise the LDO3 would overload */ + regulator-soft-start; + regulator-ramp-delay = <1600>; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>; + status = "okay"; + + epd_flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "macronix,mx25u4033", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <4000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pg_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 0b526e6e5a95..e6b036734a64 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -186,6 +186,8 @@ compatible = "allwinner,sun5i-a13-mbus"; reg = <0x01c01000 0x1000>; clocks = <&ccu CLK_MBUS>; + #address-cells = <1>; + #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0x20000000>; #interconnect-cells = <1>; }; @@ -771,9 +773,6 @@ interconnect-names = "dma-mem"; status = "disabled"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 7762fbd9a133..f3425a66fc0a 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -1139,9 +1139,6 @@ "ram"; resets = <&ccu RST_AHB1_BE1>; - assigned-clocks = <&ccu CLK_BE1>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1185,9 +1182,6 @@ "ram"; resets = <&ccu RST_AHB1_DRC1>; - assigned-clocks = <&ccu CLK_IEP_DRC1>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1231,9 +1225,6 @@ "ram"; resets = <&ccu RST_AHB1_BE0>; - assigned-clocks = <&ccu CLK_BE0>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1274,9 +1265,6 @@ "ram"; resets = <&ccu RST_AHB1_DRC0>; - assigned-clocks = <&ccu CLK_IEP_DRC0>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts new file mode 100644 index 000000000000..da5a2eea4ce3 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2020 Linutronix GmbH + * Author: Benedikt Spranger <b.spranger@linutronix.de> + */ + +/dts-v1/; +#include "sun7i-a20-lamobo-r1.dts" + +/ { + model = "Lamobo R1"; + compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + + leds { + led-opto1 { + label = "lamobo_r1:opto:powerswitch"; + gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>; + }; + + led-opto2 { + label = "lamobo_r1:opto:relay"; + gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + status = "okay"; + }; + + atecc508a@60 { + compatible = "atmel,atecc508a"; + reg = <0x60>; + }; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 92b5be97085d..ffe1d10a1a84 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/clock/sun7i-a20-ccu.h> #include <dt-bindings/reset/sun4i-a10-ccu.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -404,11 +405,12 @@ }; tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun7i-a20-tcon"; + compatible = "allwinner,sun7i-a20-tcon0", + "allwinner,sun7i-a20-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - resets = <&ccu RST_TCON0>; - reset-names = "lcd"; + resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>; + reset-names = "lcd", "lvds"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_TCON0_CH0>, <&ccu CLK_TCON0_CH1>; @@ -454,7 +456,8 @@ }; tcon1: lcd-controller@1c0d000 { - compatible = "allwinner,sun7i-a20-tcon"; + compatible = "allwinner,sun7i-a20-tcon1", + "allwinner,sun7i-a20-tcon"; reg = <0x01c0d000 0x1000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; resets = <&ccu RST_TCON1>; @@ -932,6 +935,20 @@ }; /omit-if-no-ref/ + lcd_lvds0_pins: lcd-lvds0-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD6", "PD7", "PD8", "PD9"; + function = "lvds0"; + }; + + /omit-if-no-ref/ + lcd_lvds1_pins: lcd-lvds1-pins { + pins = "PD10", "PD11", "PD12", "PD13", "PD14", + "PD15", "PD16", "PD17", "PD18", "PD19"; + function = "lvds1"; + }; + + /omit-if-no-ref/ mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 48487f6d4ab9..c1362d0f0ff8 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -684,9 +684,6 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_BUS_DRC>; - assigned-clocks = <&ccu CLK_DRC>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 1532a0e59af4..cfd3858afb3e 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -215,7 +215,7 @@ }; crypto: crypto-engine@1c15000 { - compatible = "allwinner,sun4i-a10-crypto"; + compatible = "allwinner,sun8i-a33-crypto"; reg = <0x01c15000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; @@ -372,8 +372,6 @@ "ram", "sat"; resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; reset-names = "be", "sat"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; }; &ccu { diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 2fd31a0a0b34..bfc9bb277a49 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -374,8 +374,8 @@ }; ®_dldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-name = "vdd-csi"; }; @@ -493,12 +493,12 @@ }; &usb_otg { - dr_mode = "otg"; status = "okay"; }; &usbphy { - usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_vmain>; usb2_vbus-supply = <®_vmain>; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 74ac7ee9383c..655404d6d3a3 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -72,7 +72,7 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; @@ -83,7 +83,7 @@ #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; @@ -94,7 +94,7 @@ #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; @@ -116,7 +116,7 @@ #cooling-cells = <2>; }; - cpu@101 { + cpu101: cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; @@ -127,7 +127,7 @@ #cooling-cells = <2>; }; - cpu@102 { + cpu102: cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; @@ -138,7 +138,7 @@ #cooling-cells = <2>; }; - cpu@103 { + cpu103: cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; @@ -314,7 +314,7 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-a83t-de2-clk"; - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_PLL_DE>; clock-names = "bus", @@ -324,6 +324,17 @@ #reset-cells = <1>; }; + rotate: rotate@1020000 { + compatible = "allwinner,sun8i-a83t-de2-rotate"; + reg = <0x1020000 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&display_clocks CLK_BUS_ROT>, + <&display_clocks CLK_ROT>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_ROT>; + }; + mixer0: mixer@1100000 { compatible = "allwinner,sun8i-a83t-de2-mixer-0"; reg = <0x01100000 0x100000>; @@ -1006,10 +1017,10 @@ reg = <0x01c30000 0x104>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; - resets = <&ccu CLK_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu RST_BUS_EMAC>; + clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; status = "disabled"; mdio: mdio { @@ -1188,12 +1199,60 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu0_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1_thermal: cpu1-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; + + trips { + cpu1_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu1_hot>; + cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpu_thermal: gpu-thermal { diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 20217e2ca4d3..e83aa6866e7e 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -41,6 +41,7 @@ */ #include "sunxi-h3-h5.dtsi" +#include <dt-bindings/thermal/thermal.h> / { cpu0_opp_table: opp_table0 { @@ -227,6 +228,30 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu_hot_trip: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_very_hot_trip: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu_hot_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 8f09a24b36ec..b782041e0e04 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/clock/sun8i-tcon-top.h> #include <dt-bindings/reset/sun8i-r40-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; @@ -110,6 +111,22 @@ status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu_thermal: gpu-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -119,7 +136,7 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-r40-de2-clk", "allwinner,sun8i-h3-de2-clk"; - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", @@ -181,6 +198,32 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; + spi0: spi@1c05000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + csi0: csi@1c09000 { compatible = "allwinner,sun8i-r40-csi0", "allwinner,sun7i-a20-csi0"; @@ -290,6 +333,29 @@ resets = <&ccu RST_BUS_CE>; }; + spi2: spi@1c17000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ahci: sata@1c18000 { + compatible = "allwinner,sun8i-r40-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; + resets = <&ccu RST_BUS_SATA>; + reset-names = "ahci"; + status = "disabled"; + }; + ehci1: usb@1c19000 { compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; reg = <0x01c19000 0x100>; @@ -336,6 +402,19 @@ status = "disabled"; }; + spi3: spi@1c1f000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c1f000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; @@ -500,6 +579,17 @@ clocks = <&osc24M>; }; + ths: thermal-sensor@1c24c00 { + compatible = "allwinner,sun8i-r40-ths"; + reg = <0x01c24c00 0x100>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + /* TODO: add nvmem-cells for calibration */ + #thermal-sensor-cells = <1>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -653,69 +743,6 @@ #size-cells = <0>; }; - spi0: spi@1c05000 { - compatible = "allwinner,sun8i-r40-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@1c06000 { - compatible = "allwinner,sun8i-r40-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi2: spi@1c07000 { - compatible = "allwinner,sun8i-r40-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c07000 0x1000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi3: spi@1c0f000 { - compatible = "allwinner,sun8i-r40-spi", - "allwinner,sun8i-h3-spi"; - reg = <0x01c0f000 0x1000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_SPI3>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - ahci: sata@1c18000 { - compatible = "allwinner,sun8i-r40-ahci"; - reg = <0x01c18000 0x1000>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; - resets = <&ccu RST_BUS_SATA>; - reset-names = "ahci"; - status = "disabled"; - - }; - gmac: ethernet@1c50000 { compatible = "allwinner,sun8i-r40-gmac"; syscon = <&ccu>; @@ -739,6 +766,8 @@ compatible = "allwinner,sun8i-r40-mbus"; reg = <0x01c62000 0x1000>; clocks = <&ccu 155>; + #address-cells = <1>; + #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0x80000000>; #interconnect-cells = <1>; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 81ea50838cd5..e5312869c0d2 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -105,7 +105,7 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-v3s-de2-clk"; - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 5e9c3060aa08..01a5df9aa71b 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -114,7 +114,7 @@ display_clocks: clock@1000000 { /* compatible is in per SoC .dtsi file */ - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", @@ -560,6 +560,8 @@ compatible = "allwinner,sun8i-h3-mbus"; reg = <0x01c62000 0x1000>; clocks = <&ccu CLK_MBUS>; + #address-cells = <1>; + #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0xc0000000>; #interconnect-cells = <1>; }; @@ -892,6 +894,21 @@ pins = "PL0", "PL1"; function = "s_i2c"; }; + + r_pwm_pin: r-pwm-pin { + pins = "PL10"; + function = "s_pwm"; + }; + }; + + r_pwm: pwm@1f03800 { + compatible = "allwinner,sun8i-h3-pwm"; + reg = <0x01f03800 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&r_pwm_pin>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index ff72a8efb73d..54fd522badfc 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -85,7 +85,7 @@ }; uart: serial@10700 { - compatible = "ralink,rt2880-uart"; + compatible = "ralink,rt2880-uart", "ns16550a"; reg = <0x10700 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <7372800>; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 97a5c3504bbe..d3e032e7d21a 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1296,7 +1296,13 @@ clocks = <&tegra_car TEGRA114_CLK_PLL_A>, <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA114_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA114_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 0d7a6327e404..450a1f1b12a0 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra114-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra114"; @@ -514,11 +515,12 @@ status = "disabled"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 0462ed2dd8b8..de499f736bda 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -2009,8 +2009,14 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; thermal-zones { diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index d1e8593ef0d9..d70a86da4ee4 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -2001,8 +2001,14 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; thermal-zones { diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index d5fd642f8b77..1b567e2d5ce0 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1782,12 +1782,6 @@ }; ports { - /* Micro A/B */ - usb2-0 { - status = "okay"; - mode = "otg"; - }; - /* Mini PCIe */ usb2-1 { status = "okay"; @@ -2058,8 +2052,14 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; thermal-zones { diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 3b10f475037f..9b1af50cd4b8 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -788,9 +788,15 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 7309393bfced..8c2ee6e7d6f1 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1266,8 +1266,14 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 7f330b1f150f..94cac13d3e50 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/tegra124-car.h> #include <dt-bindings/thermal/tegra124-soctherm.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra124"; @@ -595,11 +596,12 @@ clocks = <&tegra_car TEGRA124_CLK_RTC>; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra124-pmc"; reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9c58e7fcf5c0..c3b8ad53b967 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra20-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra20"; @@ -608,11 +609,12 @@ status = "disabled"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; mc: memory-controller@7000f000 { diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 8b7a827d604d..387b17458e22 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -1189,7 +1189,13 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index c18f6f61d764..6648506f3aa4 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -1171,7 +1171,13 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index a3b0f3555cd2..45ef6002b225 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -2111,7 +2111,13 @@ clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 7ce61edd52f5..4b4f49a49394 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -619,8 +619,14 @@ clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 1f9198bb24ff..adba554381c7 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -1030,8 +1030,14 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 55ae050042ce..d2d05f1da274 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra30-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra30"; @@ -714,11 +715,12 @@ status = "disabled"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; mc: memory-controller@7000f000 { diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 64ec46c72a4c..06e7400d2940 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -51,7 +51,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; @@ -245,7 +245,7 @@ #dma-cells = <1>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; @@ -265,7 +265,7 @@ sd-uhs-sdr50; }; - emmc: sdhc@5a500000 { + emmc: mmc@5a500000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; @@ -375,7 +375,7 @@ interrupt-controller; }; - aidet: aidet@61830000 { + aidet: interrupt-controller@61830000 { compatible = "socionext,uniphier-ld4-aidet"; reg = <0x61830000 0x200>; interrupt-controller; @@ -398,7 +398,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 2ec04d7972ef..1c866f0306fc 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -59,7 +59,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; @@ -279,7 +279,7 @@ #dma-cells = <1>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; @@ -299,7 +299,7 @@ sd-uhs-sdr50; }; - emmc: sdhc@5a500000 { + emmc: mmc@5a500000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; @@ -317,7 +317,7 @@ non-removable; }; - sd1: sdhc@5a600000 { + sd1: mmc@5a600000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a600000 0x200>; @@ -426,7 +426,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro4-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -588,7 +588,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index ea3961f920a0..8f1ae0957f5f 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -131,7 +131,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; @@ -144,7 +144,7 @@ next-level-cache = <&l3>; }; - l3: l3-cache@500c8000 { + l3: cache-controller@500c8000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; @@ -174,8 +174,8 @@ interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 11>; /* common with spi0 */ + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -408,7 +408,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro5-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -453,7 +453,155 @@ }; }; - nand: nand@68000000 { + usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host"; + interrupts = <0 134 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb0_rst 15>; + phys = <&usb0_hsphy0>, <&usb0_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pro5-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb0_rst: reset@0 { + compatible = "socionext,uniphier-pro5-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + + usb0_vbus0: regulator@100 { + compatible = "socionext,uniphier-pro5-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + + usb0_hsphy0: hs-phy@280 { + compatible = "socionext,uniphier-pro5-usb3-hsphy"; + reg = <0x280 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_ssphy0: ss-phy@380 { + compatible = "socionext,uniphier-pro5-usb3-ssphy"; + reg = <0x380 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + vbus-supply = <&usb0_vbus0>; + }; + }; + + usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host"; + interrupts = <0 137 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb1_rst 15>; + phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pro5-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x400>; + + usb1_rst: reset@0 { + compatible = "socionext,uniphier-pro5-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_vbus0: regulator@100 { + compatible = "socionext,uniphier-pro5-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_vbus1: regulator@110 { + compatible = "socionext,uniphier-pro5-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_hsphy0: hs-phy@280 { + compatible = "socionext,uniphier-pro5-usb3-hsphy"; + reg = <0x280 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + vbus-supply = <&usb1_vbus0>; + }; + + usb1_hsphy1: hs-phy@290 { + compatible = "socionext,uniphier-pro5-usb3-hsphy"; + reg = <0x290 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + vbus-supply = <&usb1_vbus1>; + }; + + usb1_ssphy0: ss-phy@380 { + compatible = "socionext,uniphier-pro5-usb3-ssphy"; + reg = <0x380 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + vbus-supply = <&usb1_vbus0>; + }; + }; + + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; @@ -469,7 +617,7 @@ resets = <&sys_rst 2>, <&sys_rst 2>; }; - emmc: sdhc@68400000 { + emmc: mmc@68400000 { compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68400000 0x800>; @@ -485,7 +633,7 @@ non-removable; }; - sd: sdhc@68800000 { + sd: mmc@68800000 { compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68800000 0x800>; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 13b0d4a7741f..2f2a24994c69 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -157,7 +157,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; @@ -187,8 +187,8 @@ interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -446,7 +446,7 @@ }; }; - emmc: sdhc@5a000000 { + emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a000000 0x800>; @@ -462,7 +462,7 @@ non-removable; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; @@ -508,7 +508,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pxs2-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -761,7 +761,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi index 04e60c295319..a11897669c26 100644 --- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi @@ -7,7 +7,7 @@ &i2c0 { eeprom@50 { - compatible = "microchip,24lc128"; + compatible = "microchip,24lc128", "atmel,24c128"; reg = <0x50>; pagesize = <64>; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 4fc6676f5486..09992163e1f4 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -51,7 +51,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; @@ -249,7 +249,7 @@ #dma-cells = <1>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; @@ -269,7 +269,7 @@ sd-uhs-sdr50; }; - emmc: sdhc@5a500000 { + emmc: mmc@5a500000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; @@ -379,7 +379,7 @@ interrupt-controller; }; - aidet: aidet@61830000 { + aidet: interrupt-controller@61830000 { compatible = "socionext,uniphier-sld8-aidet"; reg = <0x61830000 0x200>; interrupt-controller; @@ -402,7 +402,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts index 5890cb974f78..c577ff4bb4be 100644 --- a/arch/arm/boot/dts/versatile-ab-ib2.dts +++ b/arch/arm/boot/dts/versatile-ab-ib2.dts @@ -10,7 +10,7 @@ model = "ARM Versatile AB + IB2 board"; /* Special IB2 control register */ - ib2_syscon@27000000 { + syscon@27000000 { compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd"; reg = <0x27000000 0x4>; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index dfae90adbb7c..5c183483ec3b 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -19,7 +19,7 @@ */ / { - smb@8000000 { + bus@8000000 { motherboard { model = "V2M-P1"; arm,hbi = <0x190>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 2e29d7790497..5e48b641068a 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -19,7 +19,7 @@ */ / { - smb@4000000 { + bus@4000000 { motherboard { model = "V2M-P1"; arm,hbi = <0x190>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 0dc4277d5f8b..f82fa34c90be 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -236,7 +236,7 @@ }; }; - smb@8000000 { + bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 1de0a658adf1..3ac95a179452 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -608,7 +608,7 @@ }; }; - smb: smb@8000000 { + smb: bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index d5b47d526f9e..7aa64ae25779 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -206,7 +206,7 @@ }; }; - smb: smb@8000000 { + smb: bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index d796efaadbe3..623246f37448 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -295,7 +295,7 @@ }; }; - smb: smb@4000000 { + smb: bus@4000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index e2da122a63f4..c12a1b8bc086 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ / { diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index fba37b8756f7..cc1e069c44e6 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG + * Copyright 2014-2020 Toradex * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index 076998968fb5..088964f8dc4b 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 92255f8893ce..8af7ed56e653 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ #include "vf500.dtsi" diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index b0ec475017ad..0c0dd442300a 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -23,7 +23,7 @@ }; soc { - aips-bus@40000000 { + bus@40000000 { intc: interrupt-controller@40003000 { compatible = "arm,cortex-a9-gic"; @@ -43,7 +43,7 @@ }; }; - aips-bus@40080000 { + bus@40080000 { pmu@40089000 { compatible = "arm,cortex-a5-pmu"; interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index ef9b4d6209f6..fb661e8a2dc6 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 05c9a39509b8..607cec2df861 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ #include "vf610.dtsi" diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 28732249cfc0..ce1920c052fc 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -71,6 +71,14 @@ los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 28VDC_IN */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index a1b4ccee2a10..95d0060fb56c 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -84,6 +84,14 @@ regulator-boot-on; gpio = <&gpio0 6 0>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* VCC_1V5 */ + <&adc0 9>, /* VCC_1V8 */ + <&adc1 8>, /* VCC_1V0 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 77e1484211e4..55b4201e27f6 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -42,6 +42,14 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 28V_SW */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index 847c5858fea1..a6c22a79779e 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -46,6 +46,14 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 12V_MAIN */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index 453fce80f858..3d05c894bdc0 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -46,6 +46,14 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 12V_MAIN */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts index d4bc0e3f2f11..2c2db47af441 100644 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Device tree for Colibri VF61 Cortex-M4 support * * Copyright (C) 2015 Stefan Agner - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 028e0ec30e0c..2d547e7b21ad 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -59,7 +59,7 @@ interrupt-parent = <&mscm_ir>; ranges; - aips0: aips-bus@40000000 { + aips0: bus@40000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -471,7 +471,7 @@ }; }; - aips1: aips-bus@40080000 { + aips1: bus@40080000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 947ef7981d92..c98ebae1aeac 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -302,10 +302,13 @@ static int sa1111_retrigger_irq(struct irq_data *d) break; } - if (i == 8) + if (i == 8) { pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n", d->irq); - return i == 8 ? -1 : 0; + return 0; + } + + return 1; } static int sa1111_type_irq(struct irq_data *d, unsigned int flags) diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index f66bb98a5cce..4a0ba2ae1a25 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -118,6 +118,7 @@ CONFIG_POWER_SUPPLY=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_SAMA5D4_WATCHDOG=y CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_ATMEL_HLCDC=y CONFIG_REGULATOR=y diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig index 6ea7dafa4c9e..46075216ee6d 100644 --- a/arch/arm/configs/axm55xx_defconfig +++ b/arch/arm/configs/axm55xx_defconfig @@ -236,5 +236,3 @@ CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 0afcae9f7cf8..8e7a3ed2a4df 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -72,6 +72,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y +CONFIG_BCMGENET=y CONFIG_USB_LAN78XX=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC95XX=y @@ -96,9 +97,13 @@ CONFIG_SPI_BCM2835AUX=y CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_THERMAL=y +CONFIG_BCM2711_THERMAL=y CONFIG_BCM2835_THERMAL=y CONFIG_WATCHDOG=y CONFIG_BCM2835_WDT=y +CONFIG_MFD_SYSCON=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_GPIO=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_DRM=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index b5ba8d731a25..e849367c0566 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -158,7 +158,7 @@ CONFIG_VIDEO_TVP514X=m CONFIG_VIDEO_ADV7343=m CONFIG_DRM=m CONFIG_DRM_TILCDC=m -CONFIG_DRM_DUMB_VGA_DAC=m +CONFIG_DRM_SIMPLE_BRIDGE=m CONFIG_DRM_TINYDRM=m CONFIG_TINYDRM_ST7586=m CONFIG_FB=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index c8e0c14092e8..3c3a00fc71f6 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -8,6 +8,7 @@ CONFIG_PERF_EVENTS=y CONFIG_ARCH_EXYNOS=y CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND=y CONFIG_SMP=y +CONFIG_SCHED_MC=y CONFIG_BIG_LITTLE=y CONFIG_NR_CPUS=8 CONFIG_HIGHMEM=y @@ -17,6 +18,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_ENERGY_MODEL=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y @@ -92,7 +94,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y @@ -111,11 +113,13 @@ CONFIG_USB_LAN78XX=m CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_BRCMFMAC=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_SAMSUNG=y +CONFIG_KEYBOARD_TM2_TOUCHKEY=y CONFIG_KEYBOARD_CROS_EC=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_CYAPA=y @@ -204,6 +208,9 @@ CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVID=m CONFIG_CEC_PLATFORM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_CEC=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_S5K6A3=m +CONFIG_VIDEO_S5C73M3=m CONFIG_DRM=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y @@ -276,6 +283,7 @@ CONFIG_MMC_DW_EXYNOS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y +CONFIG_LEDS_AAT1290=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_MAX77693=y @@ -320,6 +328,7 @@ CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y +CONFIG_SQUASHFS=y CONFIG_ROMFS_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V4=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 8f216a599735..5a20d12d62bd 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -179,6 +179,9 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_TOUCHSCREEN_AD7879=y +CONFIG_TOUCHSCREEN_AD7879_I2C=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_DA9052=y CONFIG_TOUCHSCREEN_EGALAX=y CONFIG_TOUCHSCREEN_GOODIX=y diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 2f0a762dc3a0..a9755c501bec 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -55,7 +55,7 @@ CONFIG_SMC91X=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_SERIO_SERPORT is not set CONFIG_DRM=y -CONFIG_DRM_DUMB_VGA_DAC=y +CONFIG_DRM_SIMPLE_BRIDGE=y CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_MATROX=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 017d65f86eba..f8e45351c3f9 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -113,6 +113,7 @@ CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y +CONFIG_ARM_TEGRA_CPUIDLE=y CONFIG_KERNEL_MODE_NEON=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_TRUSTED_FOUNDATIONS=y @@ -640,6 +641,7 @@ CONFIG_CEC_PLATFORM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_CEC=m CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ML86V7667=m +CONFIG_IMX_IPUV3_CORE=m CONFIG_DRM=y # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set @@ -655,6 +657,11 @@ CONFIG_ROCKCHIP_ANALOGIX_DP=y CONFIG_ROCKCHIP_DW_HDMI=y CONFIG_ROCKCHIP_DW_MIPI_DSI=y CONFIG_ROCKCHIP_INNO_HDMI=y +CONFIG_DRM_IMX=m +CONFIG_DRM_IMX_PARALLEL_DISPLAY=m +CONFIG_DRM_IMX_TVE=m +CONFIG_DRM_IMX_LDB=m +CONFIG_DRM_IMX_HDMI=m CONFIG_DRM_ATMEL_HLCDC=m CONFIG_DRM_RCAR_DU=m CONFIG_DRM_RCAR_LVDS=y @@ -670,11 +677,11 @@ CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m CONFIG_DRM_PANEL_RAYDIUM_RM68200=m CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m -CONFIG_DRM_DUMB_VGA_DAC=m CONFIG_DRM_NXP_PTN3460=m CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_SII902X=m CONFIG_DRM_SII9234=m +CONFIG_DRM_SIMPLE_BRIDGE=m CONFIG_DRM_TOSHIBA_TC358764=m CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_I2C_ADV7511_AUDIO=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 847f9874ccc4..3cc3ca5fa027 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -56,6 +56,8 @@ CONFIG_CPUFREQ_DT=m # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set CONFIG_ARM_TI_CPUFREQ=y CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_DT_IDLE_STATES=y CONFIG_KERNEL_MODE_NEON=y CONFIG_PM_DEBUG=y CONFIG_ARM_CRYPTO=y @@ -78,6 +80,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=y CONFIG_CMA=y +CONFIG_ZSMALLOC=m +CONFIG_PGTABLE_MAPPING=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -130,6 +134,7 @@ CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_OMAP_OCP2SCP=y +CONFIG_SIMPLE_PM_BUS=y CONFIG_CONNECTOR=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -139,7 +144,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=m CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y @@ -149,6 +153,8 @@ CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_SPI_NOR=m CONFIG_MTD_UBI=y +CONFIG_ZRAM=m +CONFIG_ZRAM_WRITEBACK=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 @@ -186,10 +192,10 @@ CONFIG_TI_CPSW_SWITCHDEV=y CONFIG_TI_CPTS=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set -CONFIG_AT803X_PHY=y CONFIG_DP83848_PHY=y CONFIG_DP83867_PHY=y CONFIG_MICREL_PHY=y +CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m @@ -278,6 +284,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=m CONFIG_HDQ_MASTER_OMAP=m +CONFIG_W1_SLAVE_DS250X=m CONFIG_POWER_AVS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y @@ -350,20 +357,19 @@ CONFIG_DRM_OMAP=m CONFIG_OMAP5_DSS_HDMI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y -CONFIG_DRM_OMAP_ENCODER_OPA362=m -CONFIG_DRM_OMAP_ENCODER_TPD12S015=m -CONFIG_DRM_OMAP_CONNECTOR_HDMI=m -CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m CONFIG_DRM_OMAP_PANEL_DSI_CM=m CONFIG_DRM_TILCDC=m CONFIG_DRM_PANEL_SIMPLE=m -CONFIG_DRM_TI_TFP410=m CONFIG_DRM_PANEL_LG_LB035Q02=m CONFIG_DRM_PANEL_NEC_NL8048HL11=m CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m CONFIG_DRM_PANEL_SONY_ACX565AKM=m CONFIG_DRM_PANEL_TPO_TD028TTEC1=m CONFIG_DRM_PANEL_TPO_TD043MTEA1=m +CONFIG_DRM_DISPLAY_CONNECTOR=m +CONFIG_DRM_SIMPLE_BRIDGE=m +CONFIG_DRM_TI_TFP410=m +CONFIG_DRM_TI_TPD12S015=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -483,6 +489,8 @@ CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_OMAP=m CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y +CONFIG_CLK_TWL6040=m +CONFIG_COMMON_CLK_PALMAS=m CONFIG_OMAP_IOMMU=y CONFIG_REMOTEPROC=y CONFIG_OMAP_REMOTEPROC=m @@ -499,7 +507,9 @@ CONFIG_IIO_SW_DEVICE=m CONFIG_IIO_SW_TRIGGER=m CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_CPCAP_ADC=m +CONFIG_INA2XX_ADC=m CONFIG_TI_AM335X_ADC=m +CONFIG_SENSORS_ISL29028=m CONFIG_BMP280=m CONFIG_PWM=y CONFIG_PWM_OMAP_DMTIMER=m @@ -515,6 +525,7 @@ CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y +CONFIG_EXT4_FS_SECURITY=y CONFIG_FANOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y @@ -553,10 +564,10 @@ CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_PRINTK_TIME=y +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_SPLIT=y CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_SCHEDSTATS=y -# CONFIG_DEBUG_BUGVERBOSE is not set diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index cdc75ef7d529..c882167e1496 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -50,6 +50,11 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set +CONFIG_QRTR=m +CONFIG_QRTR_SMD=m +CONFIG_BT=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCM=y CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_RFKILL=y @@ -111,6 +116,7 @@ CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SERIAL_DEV_BUS=y CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index 3b82b64950d9..c090643b1ecb 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -32,7 +32,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 73ed73a8785a..153009130dab 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -202,7 +202,6 @@ CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_CONSTANTS=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 64fa849f8bbe..838307a9bb92 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -125,9 +125,9 @@ CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y CONFIG_DRM_RCAR_DU=y CONFIG_DRM_PANEL_SIMPLE=y -CONFIG_DRM_DUMB_VGA_DAC=y CONFIG_DRM_LVDS_CODEC=y CONFIG_DRM_SII902X=y +CONFIG_DRM_SIMPLE_BRIDGE=y CONFIG_DRM_I2C_ADV7511=y CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_FB_SH_MOBILE_LCDC=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index e9fb57374b9f..61b8be19e527 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -101,7 +101,7 @@ CONFIG_RC_DEVICES=y CONFIG_IR_SUNXI=y CONFIG_DRM=y CONFIG_DRM_SUN4I=y -CONFIG_DRM_DUMB_VGA_DAC=y +CONFIG_DRM_SIMPLE_BRIDGE=y CONFIG_FB_SIMPLE=y CONFIG_SOUND=y CONFIG_SND=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a27592d3b1fa..aa94369bdd0f 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -25,6 +25,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y +CONFIG_ARM_TEGRA_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_TRUSTED_FOUNDATIONS=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index fe4d4b596585..767935337413 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -59,7 +59,7 @@ CONFIG_GPIO_PL061=y CONFIG_DRM=y CONFIG_DRM_PANEL_ARM_VERSATILE=y CONFIG_DRM_PANEL_SIMPLE=y -CONFIG_DRM_DUMB_VGA_DAC=y +CONFIG_DRM_SIMPLE_BRIDGE=y CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_CLASS_DEVICE=y diff --git a/arch/arm/crypto/.gitignore b/arch/arm/crypto/.gitignore index 31e1f538df7d..8d7f4bcaec2c 100644 --- a/arch/arm/crypto/.gitignore +++ b/arch/arm/crypto/.gitignore @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-only aesbs-core.S sha256-core.S sha512-core.S +poly1305-core.S diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c index e85839a8aaeb..e6fd32919c81 100644 --- a/arch/arm/crypto/aes-neonbs-glue.c +++ b/arch/arm/crypto/aes-neonbs-glue.c @@ -138,6 +138,7 @@ static int aesbs_cbc_setkey(struct crypto_skcipher *tfm, const u8 *in_key, kernel_neon_begin(); aesbs_convert_key(ctx->key.rk, rk.key_enc, ctx->key.rounds); kernel_neon_end(); + memzero_explicit(&rk, sizeof(rk)); return crypto_cipher_setkey(ctx->enc_tfm, in_key, key_len); } diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c index 6fdb0ac62b3d..59da6c0b63b6 100644 --- a/arch/arm/crypto/chacha-glue.c +++ b/arch/arm/crypto/chacha-glue.c @@ -91,9 +91,17 @@ void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes, return; } - kernel_neon_begin(); - chacha_doneon(state, dst, src, bytes, nrounds); - kernel_neon_end(); + do { + unsigned int todo = min_t(unsigned int, bytes, SZ_4K); + + kernel_neon_begin(); + chacha_doneon(state, dst, src, todo, nrounds); + kernel_neon_end(); + + bytes -= todo; + src += todo; + dst += todo; + } while (bytes); } EXPORT_SYMBOL(chacha_crypt_arch); diff --git a/arch/arm/crypto/ghash-ce-core.S b/arch/arm/crypto/ghash-ce-core.S index 534c9647726d..9f51e3fa4526 100644 --- a/arch/arm/crypto/ghash-ce-core.S +++ b/arch/arm/crypto/ghash-ce-core.S @@ -8,6 +8,9 @@ #include <linux/linkage.h> #include <asm/assembler.h> + .arch armv8-a + .fpu crypto-neon-fp-armv8 + SHASH .req q0 T1 .req q1 XL .req q2 @@ -88,8 +91,6 @@ T3_H .req d17 .text - .arch armv8-a - .fpu crypto-neon-fp-armv8 .macro __pmull_p64, rd, rn, rm, b1, b2, b3, b4 vmull.p64 \rd, \rn, \rm diff --git a/arch/arm/crypto/nhpoly1305-neon-glue.c b/arch/arm/crypto/nhpoly1305-neon-glue.c index ae5aefc44a4d..ffa8d73fe722 100644 --- a/arch/arm/crypto/nhpoly1305-neon-glue.c +++ b/arch/arm/crypto/nhpoly1305-neon-glue.c @@ -30,7 +30,7 @@ static int nhpoly1305_neon_update(struct shash_desc *desc, return crypto_nhpoly1305_update(desc, src, srclen); do { - unsigned int n = min_t(unsigned int, srclen, PAGE_SIZE); + unsigned int n = min_t(unsigned int, srclen, SZ_4K); kernel_neon_begin(); crypto_nhpoly1305_update_helper(desc, src, n, _nh_neon); diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c index ceec04ec2f40..13cfef4ae22e 100644 --- a/arch/arm/crypto/poly1305-glue.c +++ b/arch/arm/crypto/poly1305-glue.c @@ -160,13 +160,20 @@ void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src, unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE); if (static_branch_likely(&have_neon) && do_neon) { - kernel_neon_begin(); - poly1305_blocks_neon(&dctx->h, src, len, 1); - kernel_neon_end(); + do { + unsigned int todo = min_t(unsigned int, len, SZ_4K); + + kernel_neon_begin(); + poly1305_blocks_neon(&dctx->h, src, todo, 1); + kernel_neon_end(); + + len -= todo; + src += todo; + } while (len); } else { poly1305_blocks_arm(&dctx->h, src, len, 1); + src += len; } - src += len; nbytes %= POLY1305_BLOCK_SIZE; } diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index fa579b23b4df..383635b68763 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,22 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 -generic-y += compat.h -generic-y += current.h generic-y += early_ioremap.h -generic-y += emergency-restart.h -generic-y += exec.h generic-y += extable.h generic-y += flat.h -generic-y += irq_regs.h -generic-y += kdebug.h -generic-y += local.h generic-y += local64.h -generic-y += mm-arch-hooks.h -generic-y += mmiowb.h generic-y += parport.h -generic-y += preempt.h generic-y += seccomp.h -generic-y += serial.h -generic-y += trace_clock.h generated-y += mach-types.h generated-y += unistd-nr.h diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index c815477b4303..413abfb42989 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -38,71 +38,6 @@ #define ICC_AP1R2 __ICC_AP1Rx(2) #define ICC_AP1R3 __ICC_AP1Rx(3) -#define ICC_HSRE __ACCESS_CP15(c12, 4, c9, 5) - -#define ICH_VSEIR __ACCESS_CP15(c12, 4, c9, 4) -#define ICH_HCR __ACCESS_CP15(c12, 4, c11, 0) -#define ICH_VTR __ACCESS_CP15(c12, 4, c11, 1) -#define ICH_MISR __ACCESS_CP15(c12, 4, c11, 2) -#define ICH_EISR __ACCESS_CP15(c12, 4, c11, 3) -#define ICH_ELRSR __ACCESS_CP15(c12, 4, c11, 5) -#define ICH_VMCR __ACCESS_CP15(c12, 4, c11, 7) - -#define __LR0(x) __ACCESS_CP15(c12, 4, c12, x) -#define __LR8(x) __ACCESS_CP15(c12, 4, c13, x) - -#define ICH_LR0 __LR0(0) -#define ICH_LR1 __LR0(1) -#define ICH_LR2 __LR0(2) -#define ICH_LR3 __LR0(3) -#define ICH_LR4 __LR0(4) -#define ICH_LR5 __LR0(5) -#define ICH_LR6 __LR0(6) -#define ICH_LR7 __LR0(7) -#define ICH_LR8 __LR8(0) -#define ICH_LR9 __LR8(1) -#define ICH_LR10 __LR8(2) -#define ICH_LR11 __LR8(3) -#define ICH_LR12 __LR8(4) -#define ICH_LR13 __LR8(5) -#define ICH_LR14 __LR8(6) -#define ICH_LR15 __LR8(7) - -/* LR top half */ -#define __LRC0(x) __ACCESS_CP15(c12, 4, c14, x) -#define __LRC8(x) __ACCESS_CP15(c12, 4, c15, x) - -#define ICH_LRC0 __LRC0(0) -#define ICH_LRC1 __LRC0(1) -#define ICH_LRC2 __LRC0(2) -#define ICH_LRC3 __LRC0(3) -#define ICH_LRC4 __LRC0(4) -#define ICH_LRC5 __LRC0(5) -#define ICH_LRC6 __LRC0(6) -#define ICH_LRC7 __LRC0(7) -#define ICH_LRC8 __LRC8(0) -#define ICH_LRC9 __LRC8(1) -#define ICH_LRC10 __LRC8(2) -#define ICH_LRC11 __LRC8(3) -#define ICH_LRC12 __LRC8(4) -#define ICH_LRC13 __LRC8(5) -#define ICH_LRC14 __LRC8(6) -#define ICH_LRC15 __LRC8(7) - -#define __ICH_AP0Rx(x) __ACCESS_CP15(c12, 4, c8, x) -#define ICH_AP0R0 __ICH_AP0Rx(0) -#define ICH_AP0R1 __ICH_AP0Rx(1) -#define ICH_AP0R2 __ICH_AP0Rx(2) -#define ICH_AP0R3 __ICH_AP0Rx(3) - -#define __ICH_AP1Rx(x) __ACCESS_CP15(c12, 4, c9, x) -#define ICH_AP1R0 __ICH_AP1Rx(0) -#define ICH_AP1R1 __ICH_AP1Rx(1) -#define ICH_AP1R2 __ICH_AP1Rx(2) -#define ICH_AP1R3 __ICH_AP1Rx(3) - -/* A32-to-A64 mappings used by VGIC save/restore */ - #define CPUIF_MAP(a32, a64) \ static inline void write_ ## a64(u32 val) \ { \ @@ -113,21 +48,6 @@ static inline u32 read_ ## a64(void) \ return read_sysreg(a32); \ } \ -#define CPUIF_MAP_LO_HI(a32lo, a32hi, a64) \ -static inline void write_ ## a64(u64 val) \ -{ \ - write_sysreg(lower_32_bits(val), a32lo);\ - write_sysreg(upper_32_bits(val), a32hi);\ -} \ -static inline u64 read_ ## a64(void) \ -{ \ - u64 val = read_sysreg(a32lo); \ - \ - val |= (u64)read_sysreg(a32hi) << 32; \ - \ - return val; \ -} - CPUIF_MAP(ICC_PMR, ICC_PMR_EL1) CPUIF_MAP(ICC_AP0R0, ICC_AP0R0_EL1) CPUIF_MAP(ICC_AP0R1, ICC_AP0R1_EL1) @@ -138,40 +58,6 @@ CPUIF_MAP(ICC_AP1R1, ICC_AP1R1_EL1) CPUIF_MAP(ICC_AP1R2, ICC_AP1R2_EL1) CPUIF_MAP(ICC_AP1R3, ICC_AP1R3_EL1) -CPUIF_MAP(ICH_HCR, ICH_HCR_EL2) -CPUIF_MAP(ICH_VTR, ICH_VTR_EL2) -CPUIF_MAP(ICH_MISR, ICH_MISR_EL2) -CPUIF_MAP(ICH_EISR, ICH_EISR_EL2) -CPUIF_MAP(ICH_ELRSR, ICH_ELRSR_EL2) -CPUIF_MAP(ICH_VMCR, ICH_VMCR_EL2) -CPUIF_MAP(ICH_AP0R3, ICH_AP0R3_EL2) -CPUIF_MAP(ICH_AP0R2, ICH_AP0R2_EL2) -CPUIF_MAP(ICH_AP0R1, ICH_AP0R1_EL2) -CPUIF_MAP(ICH_AP0R0, ICH_AP0R0_EL2) -CPUIF_MAP(ICH_AP1R3, ICH_AP1R3_EL2) -CPUIF_MAP(ICH_AP1R2, ICH_AP1R2_EL2) -CPUIF_MAP(ICH_AP1R1, ICH_AP1R1_EL2) -CPUIF_MAP(ICH_AP1R0, ICH_AP1R0_EL2) -CPUIF_MAP(ICC_HSRE, ICC_SRE_EL2) -CPUIF_MAP(ICC_SRE, ICC_SRE_EL1) - -CPUIF_MAP_LO_HI(ICH_LR15, ICH_LRC15, ICH_LR15_EL2) -CPUIF_MAP_LO_HI(ICH_LR14, ICH_LRC14, ICH_LR14_EL2) -CPUIF_MAP_LO_HI(ICH_LR13, ICH_LRC13, ICH_LR13_EL2) -CPUIF_MAP_LO_HI(ICH_LR12, ICH_LRC12, ICH_LR12_EL2) -CPUIF_MAP_LO_HI(ICH_LR11, ICH_LRC11, ICH_LR11_EL2) -CPUIF_MAP_LO_HI(ICH_LR10, ICH_LRC10, ICH_LR10_EL2) -CPUIF_MAP_LO_HI(ICH_LR9, ICH_LRC9, ICH_LR9_EL2) -CPUIF_MAP_LO_HI(ICH_LR8, ICH_LRC8, ICH_LR8_EL2) -CPUIF_MAP_LO_HI(ICH_LR7, ICH_LRC7, ICH_LR7_EL2) -CPUIF_MAP_LO_HI(ICH_LR6, ICH_LRC6, ICH_LR6_EL2) -CPUIF_MAP_LO_HI(ICH_LR5, ICH_LRC5, ICH_LR5_EL2) -CPUIF_MAP_LO_HI(ICH_LR4, ICH_LRC4, ICH_LR4_EL2) -CPUIF_MAP_LO_HI(ICH_LR3, ICH_LRC3, ICH_LR3_EL2) -CPUIF_MAP_LO_HI(ICH_LR2, ICH_LRC2, ICH_LR2_EL2) -CPUIF_MAP_LO_HI(ICH_LR1, ICH_LRC1, ICH_LR1_EL2) -CPUIF_MAP_LO_HI(ICH_LR0, ICH_LRC0, ICH_LR0_EL2) - #define read_gicreg(r) read_##r() #define write_gicreg(v, r) write_##r(v) diff --git a/arch/arm/include/asm/clocksource.h b/arch/arm/include/asm/clocksource.h index 0b350a7e26f3..13651c731a81 100644 --- a/arch/arm/include/asm/clocksource.h +++ b/arch/arm/include/asm/clocksource.h @@ -1,8 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_CLOCKSOURCE_H #define _ASM_CLOCKSOURCE_H -struct arch_clocksource_data { - bool vdso_direct; /* Usable for direct VDSO access? */ -}; +#include <asm/vdso/clocksource.h> -#endif +#endif /* _ASM_CLOCKSOURCE_H */ diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index d2453e2d3f1f..a54230e65647 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -50,25 +50,7 @@ #ifdef CONFIG_CPU_CP15 -#define __ACCESS_CP15(CRn, Op1, CRm, Op2) \ - "mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32 -#define __ACCESS_CP15_64(Op1, CRm) \ - "mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64 - -#define __read_sysreg(r, w, c, t) ({ \ - t __val; \ - asm volatile(r " " c : "=r" (__val)); \ - __val; \ -}) -#define read_sysreg(...) __read_sysreg(__VA_ARGS__) - -#define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v))) -#define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__) - -#define BPIALL __ACCESS_CP15(c7, 0, c5, 6) -#define ICIALLU __ACCESS_CP15(c7, 0, c5, 0) - -#define CNTVCT __ACCESS_CP15_64(1, c14) +#include <asm/vdso/cp15.h> extern unsigned long cr_alignment; /* defined in entry-armv.S */ diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 772f48ef84b7..86405cc81385 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -33,7 +33,5 @@ int arm_iommu_attach_device(struct device *dev, struct dma_iommu_mapping *mapping); void arm_iommu_detach_device(struct device *dev); -int arm_dma_supported(struct device *dev, u64 mask); - #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h index f4fe4d02cef2..79fa327238e8 100644 --- a/arch/arm/include/asm/floppy.h +++ b/arch/arm/include/asm/floppy.h @@ -8,16 +8,18 @@ */ #ifndef __ASM_ARM_FLOPPY_H #define __ASM_ARM_FLOPPY_H -#if 0 -#include <mach/floppy.h> -#endif -#define fd_outb(val,port) \ - do { \ - if ((port) == (u32)FD_DOR) \ - fd_setdor((val)); \ - else \ - outb((val),(port)); \ +#define fd_outb(val,port) \ + do { \ + int new_val = (val); \ + if (((port) & 7) == FD_DOR) { \ + if (new_val & 0xf0) \ + new_val = (new_val & 0x0c) | \ + floppy_selects[new_val & 3]; \ + else \ + new_val &= 0x0c; \ + } \ + outb(new_val, (port)); \ } while(0) #define fd_inb(port) inb((port)) @@ -53,69 +55,7 @@ static inline int fd_dma_setup(void *data, unsigned int length, * to a non-zero track, and then restoring it to track 0. If an error occurs, * then there is no floppy drive present. [to be put back in again] */ -static unsigned char floppy_selects[2][4] = -{ - { 0x10, 0x21, 0x23, 0x33 }, - { 0x10, 0x21, 0x23, 0x33 } -}; - -#define fd_setdor(dor) \ -do { \ - int new_dor = (dor); \ - if (new_dor & 0xf0) \ - new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \ - else \ - new_dor &= 0x0c; \ - outb(new_dor, FD_DOR); \ -} while (0) - -/* - * Someday, we'll automatically detect which drives are present... - */ -static inline void fd_scandrives (void) -{ -#if 0 - int floppy, drive_count; - - fd_disable_irq(); - raw_cmd = &default_raw_cmd; - raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK; - raw_cmd->track = 0; - raw_cmd->rate = ?; - drive_count = 0; - for (floppy = 0; floppy < 4; floppy ++) { - current_drive = drive_count; - /* - * Turn on floppy motor - */ - if (start_motor(redo_fd_request)) - continue; - /* - * Set up FDC - */ - fdc_specify(); - /* - * Tell FDC to recalibrate - */ - output_byte(FD_RECALIBRATE); - LAST_OUT(UNIT(floppy)); - /* wait for command to complete */ - if (!successful) { - int i; - for (i = drive_count; i < 3; i--) - floppy_selects[fdc][i] = floppy_selects[fdc][i + 1]; - floppy_selects[fdc][3] = 0; - floppy -= 1; - } else - drive_count++; - } -#else - floppy_selects[0][0] = 0x10; - floppy_selects[0][1] = 0x21; - floppy_selects[0][2] = 0x23; - floppy_selects[0][3] = 0x33; -#endif -} +static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 }; #define FDC1 (0x3f0) @@ -135,9 +75,7 @@ static inline void fd_scandrives (void) */ static void driveswap(int *ints, int dummy, int dummy2) { - floppy_selects[0][0] ^= floppy_selects[0][1]; - floppy_selects[0][1] ^= floppy_selects[0][0]; - floppy_selects[0][0] ^= floppy_selects[0][1]; + swap(floppy_selects[0], floppy_selects[1]); } #define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 } diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 83c391b597d4..a9151884bc85 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -134,10 +134,12 @@ arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr) { int oldval = 0, ret, tmp; + if (!access_ok(uaddr, sizeof(u32))) + return -EFAULT; + #ifndef CONFIG_SMP preempt_disable(); #endif - pagefault_disable(); switch (op) { case FUTEX_OP_SET: @@ -159,13 +161,17 @@ arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr) ret = -ENOSYS; } - pagefault_enable(); #ifndef CONFIG_SMP preempt_enable(); #endif - if (!ret) - *oval = oldval; + /* + * Store unconditionally. If ret != 0 the extra store is the least + * of the worries but GCC cannot figure out that __futex_atomic_op() + * is either setting ret to -EFAULT or storing the old value in + * oldval which results in a uninitialized warning at the call site. + */ + *oval = oldval; return ret; } diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h deleted file mode 100644 index 9c04bd810d07..000000000000 --- a/arch/arm/include/asm/kvm_arm.h +++ /dev/null @@ -1,239 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#ifndef __ARM_KVM_ARM_H__ -#define __ARM_KVM_ARM_H__ - -#include <linux/const.h> -#include <linux/types.h> - -/* Hyp Configuration Register (HCR) bits */ -#define HCR_TGE (1 << 27) -#define HCR_TVM (1 << 26) -#define HCR_TTLB (1 << 25) -#define HCR_TPU (1 << 24) -#define HCR_TPC (1 << 23) -#define HCR_TSW (1 << 22) -#define HCR_TAC (1 << 21) -#define HCR_TIDCP (1 << 20) -#define HCR_TSC (1 << 19) -#define HCR_TID3 (1 << 18) -#define HCR_TID2 (1 << 17) -#define HCR_TID1 (1 << 16) -#define HCR_TID0 (1 << 15) -#define HCR_TWE (1 << 14) -#define HCR_TWI (1 << 13) -#define HCR_DC (1 << 12) -#define HCR_BSU (3 << 10) -#define HCR_BSU_IS (1 << 10) -#define HCR_FB (1 << 9) -#define HCR_VA (1 << 8) -#define HCR_VI (1 << 7) -#define HCR_VF (1 << 6) -#define HCR_AMO (1 << 5) -#define HCR_IMO (1 << 4) -#define HCR_FMO (1 << 3) -#define HCR_PTW (1 << 2) -#define HCR_SWIO (1 << 1) -#define HCR_VM 1 - -/* - * The bits we set in HCR: - * TAC: Trap ACTLR - * TSC: Trap SMC - * TVM: Trap VM ops (until MMU and caches are on) - * TSW: Trap cache operations by set/way - * TWI: Trap WFI - * TWE: Trap WFE - * TIDCP: Trap L2CTLR/L2ECTLR - * BSU_IS: Upgrade barriers to the inner shareable domain - * FB: Force broadcast of all maintainance operations - * AMO: Override CPSR.A and enable signaling with VA - * IMO: Override CPSR.I and enable signaling with VI - * FMO: Override CPSR.F and enable signaling with VF - * SWIO: Turn set/way invalidates into set/way clean+invalidate - */ -#define HCR_GUEST_MASK (HCR_TSC | HCR_TSW | HCR_TWI | HCR_VM | HCR_BSU_IS | \ - HCR_FB | HCR_TAC | HCR_AMO | HCR_IMO | HCR_FMO | \ - HCR_TVM | HCR_TWE | HCR_SWIO | HCR_TIDCP) - -/* System Control Register (SCTLR) bits */ -#define SCTLR_TE (1 << 30) -#define SCTLR_EE (1 << 25) -#define SCTLR_V (1 << 13) - -/* Hyp System Control Register (HSCTLR) bits */ -#define HSCTLR_TE (1 << 30) -#define HSCTLR_EE (1 << 25) -#define HSCTLR_FI (1 << 21) -#define HSCTLR_WXN (1 << 19) -#define HSCTLR_I (1 << 12) -#define HSCTLR_C (1 << 2) -#define HSCTLR_A (1 << 1) -#define HSCTLR_M 1 -#define HSCTLR_MASK (HSCTLR_M | HSCTLR_A | HSCTLR_C | HSCTLR_I | \ - HSCTLR_WXN | HSCTLR_FI | HSCTLR_EE | HSCTLR_TE) - -/* TTBCR and HTCR Registers bits */ -#define TTBCR_EAE (1 << 31) -#define TTBCR_IMP (1 << 30) -#define TTBCR_SH1 (3 << 28) -#define TTBCR_ORGN1 (3 << 26) -#define TTBCR_IRGN1 (3 << 24) -#define TTBCR_EPD1 (1 << 23) -#define TTBCR_A1 (1 << 22) -#define TTBCR_T1SZ (7 << 16) -#define TTBCR_SH0 (3 << 12) -#define TTBCR_ORGN0 (3 << 10) -#define TTBCR_IRGN0 (3 << 8) -#define TTBCR_EPD0 (1 << 7) -#define TTBCR_T0SZ (7 << 0) -#define HTCR_MASK (TTBCR_T0SZ | TTBCR_IRGN0 | TTBCR_ORGN0 | TTBCR_SH0) - -/* Hyp System Trap Register */ -#define HSTR_T(x) (1 << x) -#define HSTR_TTEE (1 << 16) -#define HSTR_TJDBX (1 << 17) - -/* Hyp Coprocessor Trap Register */ -#define HCPTR_TCP(x) (1 << x) -#define HCPTR_TCP_MASK (0x3fff) -#define HCPTR_TASE (1 << 15) -#define HCPTR_TTA (1 << 20) -#define HCPTR_TCPAC (1 << 31) - -/* Hyp Debug Configuration Register bits */ -#define HDCR_TDRA (1 << 11) -#define HDCR_TDOSA (1 << 10) -#define HDCR_TDA (1 << 9) -#define HDCR_TDE (1 << 8) -#define HDCR_HPME (1 << 7) -#define HDCR_TPM (1 << 6) -#define HDCR_TPMCR (1 << 5) -#define HDCR_HPMN_MASK (0x1F) - -/* - * The architecture supports 40-bit IPA as input to the 2nd stage translations - * and PTRS_PER_S2_PGD becomes 1024, because each entry covers 1GB of address - * space. - */ -#define KVM_PHYS_SHIFT (40) - -#define PTRS_PER_S2_PGD (_AC(1, ULL) << (KVM_PHYS_SHIFT - 30)) - -/* Virtualization Translation Control Register (VTCR) bits */ -#define VTCR_SH0 (3 << 12) -#define VTCR_ORGN0 (3 << 10) -#define VTCR_IRGN0 (3 << 8) -#define VTCR_SL0 (3 << 6) -#define VTCR_S (1 << 4) -#define VTCR_T0SZ (0xf) -#define VTCR_MASK (VTCR_SH0 | VTCR_ORGN0 | VTCR_IRGN0 | VTCR_SL0 | \ - VTCR_S | VTCR_T0SZ) -#define VTCR_HTCR_SH (VTCR_SH0 | VTCR_ORGN0 | VTCR_IRGN0) -#define VTCR_SL_L2 (0 << 6) /* Starting-level: 2 */ -#define VTCR_SL_L1 (1 << 6) /* Starting-level: 1 */ -#define KVM_VTCR_SL0 VTCR_SL_L1 -/* stage-2 input address range defined as 2^(32-T0SZ) */ -#define KVM_T0SZ (32 - KVM_PHYS_SHIFT) -#define KVM_VTCR_T0SZ (KVM_T0SZ & VTCR_T0SZ) -#define KVM_VTCR_S ((KVM_VTCR_T0SZ << 1) & VTCR_S) - -/* Virtualization Translation Table Base Register (VTTBR) bits */ -#if KVM_VTCR_SL0 == VTCR_SL_L2 /* see ARM DDI 0406C: B4-1720 */ -#define VTTBR_X (14 - KVM_T0SZ) -#else -#define VTTBR_X (5 - KVM_T0SZ) -#endif -#define VTTBR_CNP_BIT _AC(1, UL) -#define VTTBR_BADDR_MASK (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_X) -#define VTTBR_VMID_SHIFT _AC(48, ULL) -#define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT) - -/* Hyp Syndrome Register (HSR) bits */ -#define HSR_EC_SHIFT (26) -#define HSR_EC (_AC(0x3f, UL) << HSR_EC_SHIFT) -#define HSR_IL (_AC(1, UL) << 25) -#define HSR_ISS (HSR_IL - 1) -#define HSR_ISV_SHIFT (24) -#define HSR_ISV (_AC(1, UL) << HSR_ISV_SHIFT) -#define HSR_SRT_SHIFT (16) -#define HSR_SRT_MASK (0xf << HSR_SRT_SHIFT) -#define HSR_CM (1 << 8) -#define HSR_FSC (0x3f) -#define HSR_FSC_TYPE (0x3c) -#define HSR_SSE (1 << 21) -#define HSR_WNR (1 << 6) -#define HSR_CV_SHIFT (24) -#define HSR_CV (_AC(1, UL) << HSR_CV_SHIFT) -#define HSR_COND_SHIFT (20) -#define HSR_COND (_AC(0xf, UL) << HSR_COND_SHIFT) - -#define FSC_FAULT (0x04) -#define FSC_ACCESS (0x08) -#define FSC_PERM (0x0c) -#define FSC_SEA (0x10) -#define FSC_SEA_TTW0 (0x14) -#define FSC_SEA_TTW1 (0x15) -#define FSC_SEA_TTW2 (0x16) -#define FSC_SEA_TTW3 (0x17) -#define FSC_SECC (0x18) -#define FSC_SECC_TTW0 (0x1c) -#define FSC_SECC_TTW1 (0x1d) -#define FSC_SECC_TTW2 (0x1e) -#define FSC_SECC_TTW3 (0x1f) - -/* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */ -#define HPFAR_MASK (~0xf) - -#define HSR_EC_UNKNOWN (0x00) -#define HSR_EC_WFI (0x01) -#define HSR_EC_CP15_32 (0x03) -#define HSR_EC_CP15_64 (0x04) -#define HSR_EC_CP14_MR (0x05) -#define HSR_EC_CP14_LS (0x06) -#define HSR_EC_CP_0_13 (0x07) -#define HSR_EC_CP10_ID (0x08) -#define HSR_EC_JAZELLE (0x09) -#define HSR_EC_BXJ (0x0A) -#define HSR_EC_CP14_64 (0x0C) -#define HSR_EC_SVC_HYP (0x11) -#define HSR_EC_HVC (0x12) -#define HSR_EC_SMC (0x13) -#define HSR_EC_IABT (0x20) -#define HSR_EC_IABT_HYP (0x21) -#define HSR_EC_DABT (0x24) -#define HSR_EC_DABT_HYP (0x25) -#define HSR_EC_MAX (0x3f) - -#define HSR_WFI_IS_WFE (_AC(1, UL) << 0) - -#define HSR_HVC_IMM_MASK ((_AC(1, UL) << 16) - 1) - -#define HSR_DABT_S1PTW (_AC(1, UL) << 7) -#define HSR_DABT_CM (_AC(1, UL) << 8) - -#define kvm_arm_exception_type \ - {0, "RESET" }, \ - {1, "UNDEFINED" }, \ - {2, "SOFTWARE" }, \ - {3, "PREF_ABORT" }, \ - {4, "DATA_ABORT" }, \ - {5, "IRQ" }, \ - {6, "FIQ" }, \ - {7, "HVC" } - -#define HSRECN(x) { HSR_EC_##x, #x } - -#define kvm_arm_exception_class \ - HSRECN(UNKNOWN), HSRECN(WFI), HSRECN(CP15_32), HSRECN(CP15_64), \ - HSRECN(CP14_MR), HSRECN(CP14_LS), HSRECN(CP_0_13), HSRECN(CP10_ID), \ - HSRECN(JAZELLE), HSRECN(BXJ), HSRECN(CP14_64), HSRECN(SVC_HYP), \ - HSRECN(HVC), HSRECN(SMC), HSRECN(IABT), HSRECN(IABT_HYP), \ - HSRECN(DABT), HSRECN(DABT_HYP) - - -#endif /* __ARM_KVM_ARM_H__ */ diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h deleted file mode 100644 index f615830f9f57..000000000000 --- a/arch/arm/include/asm/kvm_asm.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#ifndef __ARM_KVM_ASM_H__ -#define __ARM_KVM_ASM_H__ - -#include <asm/virt.h> - -#define ARM_EXIT_WITH_ABORT_BIT 31 -#define ARM_EXCEPTION_CODE(x) ((x) & ~(1U << ARM_EXIT_WITH_ABORT_BIT)) -#define ARM_EXCEPTION_IS_TRAP(x) \ - (ARM_EXCEPTION_CODE((x)) == ARM_EXCEPTION_PREF_ABORT || \ - ARM_EXCEPTION_CODE((x)) == ARM_EXCEPTION_DATA_ABORT || \ - ARM_EXCEPTION_CODE((x)) == ARM_EXCEPTION_HVC) -#define ARM_ABORT_PENDING(x) !!((x) & (1U << ARM_EXIT_WITH_ABORT_BIT)) - -#define ARM_EXCEPTION_RESET 0 -#define ARM_EXCEPTION_UNDEFINED 1 -#define ARM_EXCEPTION_SOFTWARE 2 -#define ARM_EXCEPTION_PREF_ABORT 3 -#define ARM_EXCEPTION_DATA_ABORT 4 -#define ARM_EXCEPTION_IRQ 5 -#define ARM_EXCEPTION_FIQ 6 -#define ARM_EXCEPTION_HVC 7 -#define ARM_EXCEPTION_HYP_GONE HVC_STUB_ERR -/* - * The rr_lo_hi macro swaps a pair of registers depending on - * current endianness. It is used in conjunction with ldrd and strd - * instructions that load/store a 64-bit value from/to memory to/from - * a pair of registers which are used with the mrrc and mcrr instructions. - * If used with the ldrd/strd instructions, the a1 parameter is the first - * source/destination register and the a2 parameter is the second - * source/destination register. Note that the ldrd/strd instructions - * already swap the bytes within the words correctly according to the - * endianness setting, but the order of the registers need to be effectively - * swapped when used with the mrrc/mcrr instructions. - */ -#ifdef CONFIG_CPU_ENDIAN_BE8 -#define rr_lo_hi(a1, a2) a2, a1 -#else -#define rr_lo_hi(a1, a2) a1, a2 -#endif - -#define kvm_ksym_ref(kva) (kva) - -#ifndef __ASSEMBLY__ -struct kvm; -struct kvm_vcpu; - -extern char __kvm_hyp_init[]; -extern char __kvm_hyp_init_end[]; - -extern void __kvm_flush_vm_context(void); -extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); -extern void __kvm_tlb_flush_vmid(struct kvm *kvm); -extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); - -extern void __kvm_timer_set_cntvoff(u32 cntvoff_low, u32 cntvoff_high); - -/* no VHE on 32-bit :( */ -static inline int kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu) { BUG(); return 0; } - -extern int __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu); - -extern void __init_stage2_translation(void); - -extern u64 __vgic_v3_get_ich_vtr_el2(void); -extern u64 __vgic_v3_read_vmcr(void); -extern void __vgic_v3_write_vmcr(u32 vmcr); -extern void __vgic_v3_init_lrs(void); - -#endif - -#endif /* __ARM_KVM_ASM_H__ */ diff --git a/arch/arm/include/asm/kvm_coproc.h b/arch/arm/include/asm/kvm_coproc.h deleted file mode 100644 index a23826117dd6..000000000000 --- a/arch/arm/include/asm/kvm_coproc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 Rusty Russell IBM Corporation - */ - -#ifndef __ARM_KVM_COPROC_H__ -#define __ARM_KVM_COPROC_H__ -#include <linux/kvm_host.h> - -void kvm_reset_coprocs(struct kvm_vcpu *vcpu); - -struct kvm_coproc_target_table { - unsigned target; - const struct coproc_reg *table; - size_t num; -}; -void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table); - -int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run); -int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run); -int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run); -int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run); -int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run); -int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run); -int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run); - -unsigned long kvm_arm_num_guest_msrs(struct kvm_vcpu *vcpu); -int kvm_arm_copy_msrindices(struct kvm_vcpu *vcpu, u64 __user *uindices); -void kvm_coproc_table_init(void); - -struct kvm_one_reg; -int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices); -int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); -int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); -unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu); -#endif /* __ARM_KVM_COPROC_H__ */ diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h deleted file mode 100644 index 3944305e81df..000000000000 --- a/arch/arm/include/asm/kvm_emulate.h +++ /dev/null @@ -1,372 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#ifndef __ARM_KVM_EMULATE_H__ -#define __ARM_KVM_EMULATE_H__ - -#include <linux/kvm_host.h> -#include <asm/kvm_asm.h> -#include <asm/kvm_arm.h> -#include <asm/cputype.h> - -/* arm64 compatibility macros */ -#define PSR_AA32_MODE_FIQ FIQ_MODE -#define PSR_AA32_MODE_SVC SVC_MODE -#define PSR_AA32_MODE_ABT ABT_MODE -#define PSR_AA32_MODE_UND UND_MODE -#define PSR_AA32_T_BIT PSR_T_BIT -#define PSR_AA32_F_BIT PSR_F_BIT -#define PSR_AA32_I_BIT PSR_I_BIT -#define PSR_AA32_A_BIT PSR_A_BIT -#define PSR_AA32_E_BIT PSR_E_BIT -#define PSR_AA32_IT_MASK PSR_IT_MASK -#define PSR_AA32_GE_MASK 0x000f0000 -#define PSR_AA32_DIT_BIT 0x00200000 -#define PSR_AA32_PAN_BIT 0x00400000 -#define PSR_AA32_SSBS_BIT 0x00800000 -#define PSR_AA32_Q_BIT PSR_Q_BIT -#define PSR_AA32_V_BIT PSR_V_BIT -#define PSR_AA32_C_BIT PSR_C_BIT -#define PSR_AA32_Z_BIT PSR_Z_BIT -#define PSR_AA32_N_BIT PSR_N_BIT - -unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num); - -static inline unsigned long *vcpu_reg32(struct kvm_vcpu *vcpu, u8 reg_num) -{ - return vcpu_reg(vcpu, reg_num); -} - -unsigned long *__vcpu_spsr(struct kvm_vcpu *vcpu); - -static inline unsigned long vpcu_read_spsr(struct kvm_vcpu *vcpu) -{ - return *__vcpu_spsr(vcpu); -} - -static inline void vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long v) -{ - *__vcpu_spsr(vcpu) = v; -} - -static inline unsigned long host_spsr_to_spsr32(unsigned long spsr) -{ - return spsr; -} - -static inline unsigned long vcpu_get_reg(struct kvm_vcpu *vcpu, - u8 reg_num) -{ - return *vcpu_reg(vcpu, reg_num); -} - -static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num, - unsigned long val) -{ - *vcpu_reg(vcpu, reg_num) = val; -} - -bool kvm_condition_valid32(const struct kvm_vcpu *vcpu); -void kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr); -void kvm_inject_undef32(struct kvm_vcpu *vcpu); -void kvm_inject_dabt32(struct kvm_vcpu *vcpu, unsigned long addr); -void kvm_inject_pabt32(struct kvm_vcpu *vcpu, unsigned long addr); -void kvm_inject_vabt(struct kvm_vcpu *vcpu); - -static inline void kvm_inject_undefined(struct kvm_vcpu *vcpu) -{ - kvm_inject_undef32(vcpu); -} - -static inline void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr) -{ - kvm_inject_dabt32(vcpu, addr); -} - -static inline void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr) -{ - kvm_inject_pabt32(vcpu, addr); -} - -static inline bool kvm_condition_valid(const struct kvm_vcpu *vcpu) -{ - return kvm_condition_valid32(vcpu); -} - -static inline void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr) -{ - kvm_skip_instr32(vcpu, is_wide_instr); -} - -static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu) -{ - vcpu->arch.hcr = HCR_GUEST_MASK; -} - -static inline unsigned long *vcpu_hcr(const struct kvm_vcpu *vcpu) -{ - return (unsigned long *)&vcpu->arch.hcr; -} - -static inline void vcpu_clear_wfx_traps(struct kvm_vcpu *vcpu) -{ - vcpu->arch.hcr &= ~HCR_TWE; -} - -static inline void vcpu_set_wfx_traps(struct kvm_vcpu *vcpu) -{ - vcpu->arch.hcr |= HCR_TWE; -} - -static inline bool vcpu_mode_is_32bit(const struct kvm_vcpu *vcpu) -{ - return true; -} - -static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu) -{ - return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_pc; -} - -static inline unsigned long *vcpu_cpsr(const struct kvm_vcpu *vcpu) -{ - return (unsigned long *)&vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr; -} - -static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) -{ - *vcpu_cpsr(vcpu) |= PSR_T_BIT; -} - -static inline bool mode_has_spsr(struct kvm_vcpu *vcpu) -{ - unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK; - return (cpsr_mode > USR_MODE && cpsr_mode < SYSTEM_MODE); -} - -static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu) -{ - unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK; - return cpsr_mode > USR_MODE; -} - -static inline u32 kvm_vcpu_get_hsr(const struct kvm_vcpu *vcpu) -{ - return vcpu->arch.fault.hsr; -} - -static inline int kvm_vcpu_get_condition(const struct kvm_vcpu *vcpu) -{ - u32 hsr = kvm_vcpu_get_hsr(vcpu); - - if (hsr & HSR_CV) - return (hsr & HSR_COND) >> HSR_COND_SHIFT; - - return -1; -} - -static inline unsigned long kvm_vcpu_get_hfar(struct kvm_vcpu *vcpu) -{ - return vcpu->arch.fault.hxfar; -} - -static inline phys_addr_t kvm_vcpu_get_fault_ipa(struct kvm_vcpu *vcpu) -{ - return ((phys_addr_t)vcpu->arch.fault.hpfar & HPFAR_MASK) << 8; -} - -static inline bool kvm_vcpu_dabt_isvalid(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) & HSR_ISV; -} - -static inline unsigned long kvm_vcpu_dabt_iss_nisv_sanitized(const struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) & (HSR_CM | HSR_WNR | HSR_FSC); -} - -static inline bool kvm_vcpu_dabt_iswrite(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) & HSR_WNR; -} - -static inline bool kvm_vcpu_dabt_issext(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) & HSR_SSE; -} - -static inline bool kvm_vcpu_dabt_issf(const struct kvm_vcpu *vcpu) -{ - return false; -} - -static inline int kvm_vcpu_dabt_get_rd(struct kvm_vcpu *vcpu) -{ - return (kvm_vcpu_get_hsr(vcpu) & HSR_SRT_MASK) >> HSR_SRT_SHIFT; -} - -static inline bool kvm_vcpu_dabt_iss1tw(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_S1PTW; -} - -static inline bool kvm_vcpu_dabt_is_cm(struct kvm_vcpu *vcpu) -{ - return !!(kvm_vcpu_get_hsr(vcpu) & HSR_DABT_CM); -} - -/* Get Access Size from a data abort */ -static inline unsigned int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu) -{ - switch ((kvm_vcpu_get_hsr(vcpu) >> 22) & 0x3) { - case 0: - return 1; - case 1: - return 2; - case 2: - return 4; - default: - kvm_err("Hardware is weird: SAS 0b11 is reserved\n"); - return 4; - } -} - -/* This one is not specific to Data Abort */ -static inline bool kvm_vcpu_trap_il_is32bit(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) & HSR_IL; -} - -static inline u8 kvm_vcpu_trap_get_class(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) >> HSR_EC_SHIFT; -} - -static inline bool kvm_vcpu_trap_is_iabt(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_trap_get_class(vcpu) == HSR_EC_IABT; -} - -static inline u8 kvm_vcpu_trap_get_fault(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) & HSR_FSC; -} - -static inline u8 kvm_vcpu_trap_get_fault_type(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) & HSR_FSC_TYPE; -} - -static inline bool kvm_vcpu_dabt_isextabt(struct kvm_vcpu *vcpu) -{ - switch (kvm_vcpu_trap_get_fault(vcpu)) { - case FSC_SEA: - case FSC_SEA_TTW0: - case FSC_SEA_TTW1: - case FSC_SEA_TTW2: - case FSC_SEA_TTW3: - case FSC_SECC: - case FSC_SECC_TTW0: - case FSC_SECC_TTW1: - case FSC_SECC_TTW2: - case FSC_SECC_TTW3: - return true; - default: - return false; - } -} - -static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu) -{ - if (kvm_vcpu_trap_is_iabt(vcpu)) - return false; - - return kvm_vcpu_dabt_iswrite(vcpu); -} - -static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu) -{ - return kvm_vcpu_get_hsr(vcpu) & HSR_HVC_IMM_MASK; -} - -static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu) -{ - return vcpu_cp15(vcpu, c0_MPIDR) & MPIDR_HWID_BITMASK; -} - -static inline bool kvm_arm_get_vcpu_workaround_2_flag(struct kvm_vcpu *vcpu) -{ - return false; -} - -static inline void kvm_arm_set_vcpu_workaround_2_flag(struct kvm_vcpu *vcpu, - bool flag) -{ -} - -static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu) -{ - *vcpu_cpsr(vcpu) |= PSR_E_BIT; -} - -static inline bool kvm_vcpu_is_be(struct kvm_vcpu *vcpu) -{ - return !!(*vcpu_cpsr(vcpu) & PSR_E_BIT); -} - -static inline unsigned long vcpu_data_guest_to_host(struct kvm_vcpu *vcpu, - unsigned long data, - unsigned int len) -{ - if (kvm_vcpu_is_be(vcpu)) { - switch (len) { - case 1: - return data & 0xff; - case 2: - return be16_to_cpu(data & 0xffff); - default: - return be32_to_cpu(data); - } - } else { - switch (len) { - case 1: - return data & 0xff; - case 2: - return le16_to_cpu(data & 0xffff); - default: - return le32_to_cpu(data); - } - } -} - -static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu, - unsigned long data, - unsigned int len) -{ - if (kvm_vcpu_is_be(vcpu)) { - switch (len) { - case 1: - return data & 0xff; - case 2: - return cpu_to_be16(data & 0xffff); - default: - return cpu_to_be32(data); - } - } else { - switch (len) { - case 1: - return data & 0xff; - case 2: - return cpu_to_le16(data & 0xffff); - default: - return cpu_to_le32(data); - } - } -} - -static inline void vcpu_ptrauth_setup_lazy(struct kvm_vcpu *vcpu) {} - -#endif /* __ARM_KVM_EMULATE_H__ */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h deleted file mode 100644 index a827b4d60d38..000000000000 --- a/arch/arm/include/asm/kvm_host.h +++ /dev/null @@ -1,456 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#ifndef __ARM_KVM_HOST_H__ -#define __ARM_KVM_HOST_H__ - -#include <linux/arm-smccc.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/kvm_types.h> -#include <asm/cputype.h> -#include <asm/kvm.h> -#include <asm/kvm_asm.h> -#include <asm/fpstate.h> -#include <kvm/arm_arch_timer.h> - -#define __KVM_HAVE_ARCH_INTC_INITIALIZED - -#define KVM_USER_MEM_SLOTS 32 -#define KVM_HAVE_ONE_REG -#define KVM_HALT_POLL_NS_DEFAULT 500000 - -#define KVM_VCPU_MAX_FEATURES 2 - -#include <kvm/arm_vgic.h> - - -#ifdef CONFIG_ARM_GIC_V3 -#define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS -#else -#define KVM_MAX_VCPUS VGIC_V2_MAX_CPUS -#endif - -#define KVM_REQ_SLEEP \ - KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) -#define KVM_REQ_IRQ_PENDING KVM_ARCH_REQ(1) -#define KVM_REQ_VCPU_RESET KVM_ARCH_REQ(2) -#define KVM_REQ_RECORD_STEAL KVM_ARCH_REQ(3) - -DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use); - -static inline int kvm_arm_init_sve(void) { return 0; } - -u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode); -int __attribute_const__ kvm_target_cpu(void); -int kvm_reset_vcpu(struct kvm_vcpu *vcpu); -void kvm_reset_coprocs(struct kvm_vcpu *vcpu); - -struct kvm_vmid { - /* The VMID generation used for the virt. memory system */ - u64 vmid_gen; - u32 vmid; -}; - -struct kvm_arch { - /* The last vcpu id that ran on each physical CPU */ - int __percpu *last_vcpu_ran; - - /* - * Anything that is not used directly from assembly code goes - * here. - */ - - /* The VMID generation used for the virt. memory system */ - struct kvm_vmid vmid; - - /* Stage-2 page table */ - pgd_t *pgd; - phys_addr_t pgd_phys; - - /* Interrupt controller */ - struct vgic_dist vgic; - int max_vcpus; - - /* Mandated version of PSCI */ - u32 psci_version; - - /* - * If we encounter a data abort without valid instruction syndrome - * information, report this to user space. User space can (and - * should) opt in to this feature if KVM_CAP_ARM_NISV_TO_USER is - * supported. - */ - bool return_nisv_io_abort_to_user; -}; - -#define KVM_NR_MEM_OBJS 40 - -/* - * We don't want allocation failures within the mmu code, so we preallocate - * enough memory for a single page fault in a cache. - */ -struct kvm_mmu_memory_cache { - int nobjs; - void *objects[KVM_NR_MEM_OBJS]; -}; - -struct kvm_vcpu_fault_info { - u32 hsr; /* Hyp Syndrome Register */ - u32 hxfar; /* Hyp Data/Inst. Fault Address Register */ - u32 hpfar; /* Hyp IPA Fault Address Register */ -}; - -/* - * 0 is reserved as an invalid value. - * Order should be kept in sync with the save/restore code. - */ -enum vcpu_sysreg { - __INVALID_SYSREG__, - c0_MPIDR, /* MultiProcessor ID Register */ - c0_CSSELR, /* Cache Size Selection Register */ - c1_SCTLR, /* System Control Register */ - c1_ACTLR, /* Auxiliary Control Register */ - c1_CPACR, /* Coprocessor Access Control */ - c2_TTBR0, /* Translation Table Base Register 0 */ - c2_TTBR0_high, /* TTBR0 top 32 bits */ - c2_TTBR1, /* Translation Table Base Register 1 */ - c2_TTBR1_high, /* TTBR1 top 32 bits */ - c2_TTBCR, /* Translation Table Base Control R. */ - c3_DACR, /* Domain Access Control Register */ - c5_DFSR, /* Data Fault Status Register */ - c5_IFSR, /* Instruction Fault Status Register */ - c5_ADFSR, /* Auxilary Data Fault Status R */ - c5_AIFSR, /* Auxilary Instrunction Fault Status R */ - c6_DFAR, /* Data Fault Address Register */ - c6_IFAR, /* Instruction Fault Address Register */ - c7_PAR, /* Physical Address Register */ - c7_PAR_high, /* PAR top 32 bits */ - c9_L2CTLR, /* Cortex A15/A7 L2 Control Register */ - c10_PRRR, /* Primary Region Remap Register */ - c10_NMRR, /* Normal Memory Remap Register */ - c12_VBAR, /* Vector Base Address Register */ - c13_CID, /* Context ID Register */ - c13_TID_URW, /* Thread ID, User R/W */ - c13_TID_URO, /* Thread ID, User R/O */ - c13_TID_PRIV, /* Thread ID, Privileged */ - c14_CNTKCTL, /* Timer Control Register (PL1) */ - c10_AMAIR0, /* Auxilary Memory Attribute Indirection Reg0 */ - c10_AMAIR1, /* Auxilary Memory Attribute Indirection Reg1 */ - NR_CP15_REGS /* Number of regs (incl. invalid) */ -}; - -struct kvm_cpu_context { - struct kvm_regs gp_regs; - struct vfp_hard_struct vfp; - u32 cp15[NR_CP15_REGS]; -}; - -struct kvm_host_data { - struct kvm_cpu_context host_ctxt; -}; - -typedef struct kvm_host_data kvm_host_data_t; - -static inline void kvm_init_host_cpu_context(struct kvm_cpu_context *cpu_ctxt) -{ - /* The host's MPIDR is immutable, so let's set it up at boot time */ - cpu_ctxt->cp15[c0_MPIDR] = read_cpuid_mpidr(); -} - -struct vcpu_reset_state { - unsigned long pc; - unsigned long r0; - bool be; - bool reset; -}; - -struct kvm_vcpu_arch { - struct kvm_cpu_context ctxt; - - int target; /* Processor target */ - DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES); - - /* The CPU type we expose to the VM */ - u32 midr; - - /* HYP trapping configuration */ - u32 hcr; - - /* Exception Information */ - struct kvm_vcpu_fault_info fault; - - /* Host FP context */ - struct kvm_cpu_context *host_cpu_context; - - /* VGIC state */ - struct vgic_cpu vgic_cpu; - struct arch_timer_cpu timer_cpu; - - /* - * Anything that is not used directly from assembly code goes - * here. - */ - - /* vcpu power-off state */ - bool power_off; - - /* Don't run the guest (internal implementation need) */ - bool pause; - - /* Cache some mmu pages needed inside spinlock regions */ - struct kvm_mmu_memory_cache mmu_page_cache; - - struct vcpu_reset_state reset_state; - - /* Detect first run of a vcpu */ - bool has_run_once; -}; - -struct kvm_vm_stat { - ulong remote_tlb_flush; -}; - -struct kvm_vcpu_stat { - u64 halt_successful_poll; - u64 halt_attempted_poll; - u64 halt_poll_invalid; - u64 halt_wakeup; - u64 hvc_exit_stat; - u64 wfe_exit_stat; - u64 wfi_exit_stat; - u64 mmio_exit_user; - u64 mmio_exit_kernel; - u64 exits; -}; - -#define vcpu_cp15(v,r) (v)->arch.ctxt.cp15[r] - -int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init); -unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); -int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); -int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); -int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); - -unsigned long __kvm_call_hyp(void *hypfn, ...); - -/* - * The has_vhe() part doesn't get emitted, but is used for type-checking. - */ -#define kvm_call_hyp(f, ...) \ - do { \ - if (has_vhe()) { \ - f(__VA_ARGS__); \ - } else { \ - __kvm_call_hyp(kvm_ksym_ref(f), ##__VA_ARGS__); \ - } \ - } while(0) - -#define kvm_call_hyp_ret(f, ...) \ - ({ \ - typeof(f(__VA_ARGS__)) ret; \ - \ - if (has_vhe()) { \ - ret = f(__VA_ARGS__); \ - } else { \ - ret = __kvm_call_hyp(kvm_ksym_ref(f), \ - ##__VA_ARGS__); \ - } \ - \ - ret; \ - }) - -void force_vm_exit(const cpumask_t *mask); -int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu, - struct kvm_vcpu_events *events); - -int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, - struct kvm_vcpu_events *events); - -#define KVM_ARCH_WANT_MMU_NOTIFIER -int kvm_unmap_hva_range(struct kvm *kvm, - unsigned long start, unsigned long end); -int kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); - -unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); -int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); -int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end); -int kvm_test_age_hva(struct kvm *kvm, unsigned long hva); - -void kvm_arm_halt_guest(struct kvm *kvm); -void kvm_arm_resume_guest(struct kvm *kvm); - -int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices); -unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu); -int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); -int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); - -int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, - int exception_index); - -static inline void handle_exit_early(struct kvm_vcpu *vcpu, struct kvm_run *run, - int exception_index) {} - -/* MMIO helpers */ -void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data); -unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len); - -int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run); -int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, - phys_addr_t fault_ipa); - -static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr, - unsigned long hyp_stack_ptr, - unsigned long vector_ptr) -{ - /* - * Call initialization code, and switch to the full blown HYP - * code. The init code doesn't need to preserve these - * registers as r0-r3 are already callee saved according to - * the AAPCS. - * Note that we slightly misuse the prototype by casting the - * stack pointer to a void *. - - * The PGDs are always passed as the third argument, in order - * to be passed into r2-r3 to the init code (yes, this is - * compliant with the PCS!). - */ - - __kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr); -} - -static inline void __cpu_init_stage2(void) -{ - kvm_call_hyp(__init_stage2_translation); -} - -static inline int kvm_arch_vm_ioctl_check_extension(struct kvm *kvm, long ext) -{ - return 0; -} - -int kvm_perf_init(void); -int kvm_perf_teardown(void); - -static inline long kvm_hypercall_pv_features(struct kvm_vcpu *vcpu) -{ - return SMCCC_RET_NOT_SUPPORTED; -} - -static inline gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu) -{ - return GPA_INVALID; -} - -static inline void kvm_update_stolen_time(struct kvm_vcpu *vcpu) -{ -} - -static inline void kvm_arm_pvtime_vcpu_init(struct kvm_vcpu_arch *vcpu_arch) -{ -} - -static inline bool kvm_arm_is_pvtime_enabled(struct kvm_vcpu_arch *vcpu_arch) -{ - return false; -} - -void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot); - -struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr); - -static inline bool kvm_arch_requires_vhe(void) { return false; } -static inline void kvm_arch_hardware_unsetup(void) {} -static inline void kvm_arch_sync_events(struct kvm *kvm) {} -static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {} -static inline void kvm_arch_vcpu_block_finish(struct kvm_vcpu *vcpu) {} -static inline void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu) {} - -static inline void kvm_arm_init_debug(void) {} -static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {} -static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {} -static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {} - -int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, - struct kvm_device_attr *attr); -int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, - struct kvm_device_attr *attr); -int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, - struct kvm_device_attr *attr); - -/* - * VFP/NEON switching is all done by the hyp switch code, so no need to - * coordinate with host context handling for this state: - */ -static inline void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu) {} -static inline void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu) {} -static inline void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu) {} - -static inline void kvm_vcpu_pmu_restore_guest(struct kvm_vcpu *vcpu) {} -static inline void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu) {} - -#define KVM_BP_HARDEN_UNKNOWN -1 -#define KVM_BP_HARDEN_WA_NEEDED 0 -#define KVM_BP_HARDEN_NOT_REQUIRED 1 - -static inline int kvm_arm_harden_branch_predictor(void) -{ - switch(read_cpuid_part()) { -#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR - case ARM_CPU_PART_BRAHMA_B15: - case ARM_CPU_PART_CORTEX_A12: - case ARM_CPU_PART_CORTEX_A15: - case ARM_CPU_PART_CORTEX_A17: - return KVM_BP_HARDEN_WA_NEEDED; -#endif - case ARM_CPU_PART_CORTEX_A7: - return KVM_BP_HARDEN_NOT_REQUIRED; - default: - return KVM_BP_HARDEN_UNKNOWN; - } -} - -#define KVM_SSBD_UNKNOWN -1 -#define KVM_SSBD_FORCE_DISABLE 0 -#define KVM_SSBD_KERNEL 1 -#define KVM_SSBD_FORCE_ENABLE 2 -#define KVM_SSBD_MITIGATED 3 - -static inline int kvm_arm_have_ssbd(void) -{ - /* No way to detect it yet, pretend it is not there. */ - return KVM_SSBD_UNKNOWN; -} - -static inline void kvm_vcpu_load_sysregs(struct kvm_vcpu *vcpu) {} -static inline void kvm_vcpu_put_sysregs(struct kvm_vcpu *vcpu) {} - -#define __KVM_HAVE_ARCH_VM_ALLOC -struct kvm *kvm_arch_alloc_vm(void); -void kvm_arch_free_vm(struct kvm *kvm); - -static inline int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type) -{ - /* - * On 32bit ARM, VMs get a static 40bit IPA stage2 setup, - * so any non-zero value used as type is illegal. - */ - if (type) - return -EINVAL; - return 0; -} - -static inline int kvm_arm_vcpu_finalize(struct kvm_vcpu *vcpu, int feature) -{ - return -EINVAL; -} - -static inline bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu) -{ - return true; -} - -#endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h deleted file mode 100644 index 3c1b55ecc578..000000000000 --- a/arch/arm/include/asm/kvm_hyp.h +++ /dev/null @@ -1,127 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2015 - ARM Ltd - * Author: Marc Zyngier <marc.zyngier@arm.com> - */ - -#ifndef __ARM_KVM_HYP_H__ -#define __ARM_KVM_HYP_H__ - -#include <linux/compiler.h> -#include <linux/kvm_host.h> -#include <asm/cp15.h> -#include <asm/kvm_arm.h> -#include <asm/vfp.h> - -#define __hyp_text __section(.hyp.text) notrace - -#define __ACCESS_VFP(CRn) \ - "mrc", "mcr", __stringify(p10, 7, %0, CRn, cr0, 0), u32 - -#define write_special(v, r) \ - asm volatile("msr " __stringify(r) ", %0" : : "r" (v)) -#define read_special(r) ({ \ - u32 __val; \ - asm volatile("mrs %0, " __stringify(r) : "=r" (__val)); \ - __val; \ -}) - -#define TTBR0 __ACCESS_CP15_64(0, c2) -#define TTBR1 __ACCESS_CP15_64(1, c2) -#define VTTBR __ACCESS_CP15_64(6, c2) -#define PAR __ACCESS_CP15_64(0, c7) -#define CNTP_CVAL __ACCESS_CP15_64(2, c14) -#define CNTV_CVAL __ACCESS_CP15_64(3, c14) -#define CNTVOFF __ACCESS_CP15_64(4, c14) - -#define MIDR __ACCESS_CP15(c0, 0, c0, 0) -#define CSSELR __ACCESS_CP15(c0, 2, c0, 0) -#define VPIDR __ACCESS_CP15(c0, 4, c0, 0) -#define VMPIDR __ACCESS_CP15(c0, 4, c0, 5) -#define SCTLR __ACCESS_CP15(c1, 0, c0, 0) -#define CPACR __ACCESS_CP15(c1, 0, c0, 2) -#define HCR __ACCESS_CP15(c1, 4, c1, 0) -#define HDCR __ACCESS_CP15(c1, 4, c1, 1) -#define HCPTR __ACCESS_CP15(c1, 4, c1, 2) -#define HSTR __ACCESS_CP15(c1, 4, c1, 3) -#define TTBCR __ACCESS_CP15(c2, 0, c0, 2) -#define HTCR __ACCESS_CP15(c2, 4, c0, 2) -#define VTCR __ACCESS_CP15(c2, 4, c1, 2) -#define DACR __ACCESS_CP15(c3, 0, c0, 0) -#define DFSR __ACCESS_CP15(c5, 0, c0, 0) -#define IFSR __ACCESS_CP15(c5, 0, c0, 1) -#define ADFSR __ACCESS_CP15(c5, 0, c1, 0) -#define AIFSR __ACCESS_CP15(c5, 0, c1, 1) -#define HSR __ACCESS_CP15(c5, 4, c2, 0) -#define DFAR __ACCESS_CP15(c6, 0, c0, 0) -#define IFAR __ACCESS_CP15(c6, 0, c0, 2) -#define HDFAR __ACCESS_CP15(c6, 4, c0, 0) -#define HIFAR __ACCESS_CP15(c6, 4, c0, 2) -#define HPFAR __ACCESS_CP15(c6, 4, c0, 4) -#define ICIALLUIS __ACCESS_CP15(c7, 0, c1, 0) -#define BPIALLIS __ACCESS_CP15(c7, 0, c1, 6) -#define ICIMVAU __ACCESS_CP15(c7, 0, c5, 1) -#define ATS1CPR __ACCESS_CP15(c7, 0, c8, 0) -#define TLBIALLIS __ACCESS_CP15(c8, 0, c3, 0) -#define TLBIALL __ACCESS_CP15(c8, 0, c7, 0) -#define TLBIALLNSNHIS __ACCESS_CP15(c8, 4, c3, 4) -#define PRRR __ACCESS_CP15(c10, 0, c2, 0) -#define NMRR __ACCESS_CP15(c10, 0, c2, 1) -#define AMAIR0 __ACCESS_CP15(c10, 0, c3, 0) -#define AMAIR1 __ACCESS_CP15(c10, 0, c3, 1) -#define VBAR __ACCESS_CP15(c12, 0, c0, 0) -#define CID __ACCESS_CP15(c13, 0, c0, 1) -#define TID_URW __ACCESS_CP15(c13, 0, c0, 2) -#define TID_URO __ACCESS_CP15(c13, 0, c0, 3) -#define TID_PRIV __ACCESS_CP15(c13, 0, c0, 4) -#define HTPIDR __ACCESS_CP15(c13, 4, c0, 2) -#define CNTKCTL __ACCESS_CP15(c14, 0, c1, 0) -#define CNTP_CTL __ACCESS_CP15(c14, 0, c2, 1) -#define CNTV_CTL __ACCESS_CP15(c14, 0, c3, 1) -#define CNTHCTL __ACCESS_CP15(c14, 4, c1, 0) - -#define VFP_FPEXC __ACCESS_VFP(FPEXC) - -/* AArch64 compatibility macros, only for the timer so far */ -#define read_sysreg_el0(r) read_sysreg(r##_EL0) -#define write_sysreg_el0(v, r) write_sysreg(v, r##_EL0) - -#define SYS_CNTP_CTL_EL0 CNTP_CTL -#define SYS_CNTP_CVAL_EL0 CNTP_CVAL -#define SYS_CNTV_CTL_EL0 CNTV_CTL -#define SYS_CNTV_CVAL_EL0 CNTV_CVAL - -#define cntvoff_el2 CNTVOFF -#define cnthctl_el2 CNTHCTL - -void __timer_enable_traps(struct kvm_vcpu *vcpu); -void __timer_disable_traps(struct kvm_vcpu *vcpu); - -void __vgic_v2_save_state(struct kvm_vcpu *vcpu); -void __vgic_v2_restore_state(struct kvm_vcpu *vcpu); - -void __sysreg_save_state(struct kvm_cpu_context *ctxt); -void __sysreg_restore_state(struct kvm_cpu_context *ctxt); - -void __vgic_v3_save_state(struct kvm_vcpu *vcpu); -void __vgic_v3_restore_state(struct kvm_vcpu *vcpu); -void __vgic_v3_activate_traps(struct kvm_vcpu *vcpu); -void __vgic_v3_deactivate_traps(struct kvm_vcpu *vcpu); -void __vgic_v3_save_aprs(struct kvm_vcpu *vcpu); -void __vgic_v3_restore_aprs(struct kvm_vcpu *vcpu); - -asmlinkage void __vfp_save_state(struct vfp_hard_struct *vfp); -asmlinkage void __vfp_restore_state(struct vfp_hard_struct *vfp); -static inline bool __vfp_enabled(void) -{ - return !(read_sysreg(HCPTR) & (HCPTR_TCP(11) | HCPTR_TCP(10))); -} - -void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt); -void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt); - -asmlinkage int __guest_enter(struct kvm_vcpu *vcpu, - struct kvm_cpu_context *host); -asmlinkage int __hyp_do_panic(const char *, int, u32); - -#endif /* __ARM_KVM_HYP_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h deleted file mode 100644 index 0d84d50bf9ba..000000000000 --- a/arch/arm/include/asm/kvm_mmu.h +++ /dev/null @@ -1,435 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#ifndef __ARM_KVM_MMU_H__ -#define __ARM_KVM_MMU_H__ - -#include <asm/memory.h> -#include <asm/page.h> - -/* - * We directly use the kernel VA for the HYP, as we can directly share - * the mapping (HTTBR "covers" TTBR1). - */ -#define kern_hyp_va(kva) (kva) - -/* Contrary to arm64, there is no need to generate a PC-relative address */ -#define hyp_symbol_addr(s) \ - ({ \ - typeof(s) *addr = &(s); \ - addr; \ - }) - -#ifndef __ASSEMBLY__ - -#include <linux/highmem.h> -#include <asm/cacheflush.h> -#include <asm/cputype.h> -#include <asm/kvm_arm.h> -#include <asm/kvm_hyp.h> -#include <asm/pgalloc.h> -#include <asm/stage2_pgtable.h> - -/* Ensure compatibility with arm64 */ -#define VA_BITS 32 - -#define kvm_phys_shift(kvm) KVM_PHYS_SHIFT -#define kvm_phys_size(kvm) (1ULL << kvm_phys_shift(kvm)) -#define kvm_phys_mask(kvm) (kvm_phys_size(kvm) - 1ULL) -#define kvm_vttbr_baddr_mask(kvm) VTTBR_BADDR_MASK - -#define stage2_pgd_size(kvm) (PTRS_PER_S2_PGD * sizeof(pgd_t)) - -int create_hyp_mappings(void *from, void *to, pgprot_t prot); -int create_hyp_io_mappings(phys_addr_t phys_addr, size_t size, - void __iomem **kaddr, - void __iomem **haddr); -int create_hyp_exec_mappings(phys_addr_t phys_addr, size_t size, - void **haddr); -void free_hyp_pgds(void); - -void stage2_unmap_vm(struct kvm *kvm); -int kvm_alloc_stage2_pgd(struct kvm *kvm); -void kvm_free_stage2_pgd(struct kvm *kvm); -int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, - phys_addr_t pa, unsigned long size, bool writable); - -int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run); - -void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu); - -phys_addr_t kvm_mmu_get_httbr(void); -phys_addr_t kvm_get_idmap_vector(void); -int kvm_mmu_init(void); -void kvm_clear_hyp_idmap(void); - -#define kvm_mk_pmd(ptep) __pmd(__pa(ptep) | PMD_TYPE_TABLE) -#define kvm_mk_pud(pmdp) __pud(__pa(pmdp) | PMD_TYPE_TABLE) -#define kvm_mk_pgd(pudp) ({ BUILD_BUG(); 0; }) - -#define kvm_pfn_pte(pfn, prot) pfn_pte(pfn, prot) -#define kvm_pfn_pmd(pfn, prot) pfn_pmd(pfn, prot) -#define kvm_pfn_pud(pfn, prot) (__pud(0)) - -#define kvm_pud_pfn(pud) ({ WARN_ON(1); 0; }) - - -#define kvm_pmd_mkhuge(pmd) pmd_mkhuge(pmd) -/* No support for pud hugepages */ -#define kvm_pud_mkhuge(pud) ( {WARN_ON(1); pud; }) - -/* - * The following kvm_*pud*() functions are provided strictly to allow - * sharing code with arm64. They should never be called in practice. - */ -static inline void kvm_set_s2pud_readonly(pud_t *pud) -{ - WARN_ON(1); -} - -static inline bool kvm_s2pud_readonly(pud_t *pud) -{ - WARN_ON(1); - return false; -} - -static inline void kvm_set_pud(pud_t *pud, pud_t new_pud) -{ - WARN_ON(1); -} - -static inline pud_t kvm_s2pud_mkwrite(pud_t pud) -{ - WARN_ON(1); - return pud; -} - -static inline pud_t kvm_s2pud_mkexec(pud_t pud) -{ - WARN_ON(1); - return pud; -} - -static inline bool kvm_s2pud_exec(pud_t *pud) -{ - WARN_ON(1); - return false; -} - -static inline pud_t kvm_s2pud_mkyoung(pud_t pud) -{ - BUG(); - return pud; -} - -static inline bool kvm_s2pud_young(pud_t pud) -{ - WARN_ON(1); - return false; -} - -static inline pte_t kvm_s2pte_mkwrite(pte_t pte) -{ - pte_val(pte) |= L_PTE_S2_RDWR; - return pte; -} - -static inline pmd_t kvm_s2pmd_mkwrite(pmd_t pmd) -{ - pmd_val(pmd) |= L_PMD_S2_RDWR; - return pmd; -} - -static inline pte_t kvm_s2pte_mkexec(pte_t pte) -{ - pte_val(pte) &= ~L_PTE_XN; - return pte; -} - -static inline pmd_t kvm_s2pmd_mkexec(pmd_t pmd) -{ - pmd_val(pmd) &= ~PMD_SECT_XN; - return pmd; -} - -static inline void kvm_set_s2pte_readonly(pte_t *pte) -{ - pte_val(*pte) = (pte_val(*pte) & ~L_PTE_S2_RDWR) | L_PTE_S2_RDONLY; -} - -static inline bool kvm_s2pte_readonly(pte_t *pte) -{ - return (pte_val(*pte) & L_PTE_S2_RDWR) == L_PTE_S2_RDONLY; -} - -static inline bool kvm_s2pte_exec(pte_t *pte) -{ - return !(pte_val(*pte) & L_PTE_XN); -} - -static inline void kvm_set_s2pmd_readonly(pmd_t *pmd) -{ - pmd_val(*pmd) = (pmd_val(*pmd) & ~L_PMD_S2_RDWR) | L_PMD_S2_RDONLY; -} - -static inline bool kvm_s2pmd_readonly(pmd_t *pmd) -{ - return (pmd_val(*pmd) & L_PMD_S2_RDWR) == L_PMD_S2_RDONLY; -} - -static inline bool kvm_s2pmd_exec(pmd_t *pmd) -{ - return !(pmd_val(*pmd) & PMD_SECT_XN); -} - -static inline bool kvm_page_empty(void *ptr) -{ - struct page *ptr_page = virt_to_page(ptr); - return page_count(ptr_page) == 1; -} - -#define kvm_pte_table_empty(kvm, ptep) kvm_page_empty(ptep) -#define kvm_pmd_table_empty(kvm, pmdp) kvm_page_empty(pmdp) -#define kvm_pud_table_empty(kvm, pudp) false - -#define hyp_pte_table_empty(ptep) kvm_page_empty(ptep) -#define hyp_pmd_table_empty(pmdp) kvm_page_empty(pmdp) -#define hyp_pud_table_empty(pudp) false - -struct kvm; - -#define kvm_flush_dcache_to_poc(a,l) __cpuc_flush_dcache_area((a), (l)) - -static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu) -{ - return (vcpu_cp15(vcpu, c1_SCTLR) & 0b101) == 0b101; -} - -static inline void __clean_dcache_guest_page(kvm_pfn_t pfn, unsigned long size) -{ - /* - * Clean the dcache to the Point of Coherency. - * - * We need to do this through a kernel mapping (using the - * user-space mapping has proved to be the wrong - * solution). For that, we need to kmap one page at a time, - * and iterate over the range. - */ - - VM_BUG_ON(size & ~PAGE_MASK); - - while (size) { - void *va = kmap_atomic_pfn(pfn); - - kvm_flush_dcache_to_poc(va, PAGE_SIZE); - - size -= PAGE_SIZE; - pfn++; - - kunmap_atomic(va); - } -} - -static inline void __invalidate_icache_guest_page(kvm_pfn_t pfn, - unsigned long size) -{ - u32 iclsz; - - /* - * If we are going to insert an instruction page and the icache is - * either VIPT or PIPT, there is a potential problem where the host - * (or another VM) may have used the same page as this guest, and we - * read incorrect data from the icache. If we're using a PIPT cache, - * we can invalidate just that page, but if we are using a VIPT cache - * we need to invalidate the entire icache - damn shame - as written - * in the ARM ARM (DDI 0406C.b - Page B3-1393). - * - * VIVT caches are tagged using both the ASID and the VMID and doesn't - * need any kind of flushing (DDI 0406C.b - Page B3-1392). - */ - - VM_BUG_ON(size & ~PAGE_MASK); - - if (icache_is_vivt_asid_tagged()) - return; - - if (!icache_is_pipt()) { - /* any kind of VIPT cache */ - __flush_icache_all(); - return; - } - - /* - * CTR IminLine contains Log2 of the number of words in the - * cache line, so we can get the number of words as - * 2 << (IminLine - 1). To get the number of bytes, we - * multiply by 4 (the number of bytes in a 32-bit word), and - * get 4 << (IminLine). - */ - iclsz = 4 << (read_cpuid(CPUID_CACHETYPE) & 0xf); - - while (size) { - void *va = kmap_atomic_pfn(pfn); - void *end = va + PAGE_SIZE; - void *addr = va; - - do { - write_sysreg(addr, ICIMVAU); - addr += iclsz; - } while (addr < end); - - dsb(ishst); - isb(); - - size -= PAGE_SIZE; - pfn++; - - kunmap_atomic(va); - } - - /* Check if we need to invalidate the BTB */ - if ((read_cpuid_ext(CPUID_EXT_MMFR1) >> 28) != 4) { - write_sysreg(0, BPIALLIS); - dsb(ishst); - isb(); - } -} - -static inline void __kvm_flush_dcache_pte(pte_t pte) -{ - void *va = kmap_atomic(pte_page(pte)); - - kvm_flush_dcache_to_poc(va, PAGE_SIZE); - - kunmap_atomic(va); -} - -static inline void __kvm_flush_dcache_pmd(pmd_t pmd) -{ - unsigned long size = PMD_SIZE; - kvm_pfn_t pfn = pmd_pfn(pmd); - - while (size) { - void *va = kmap_atomic_pfn(pfn); - - kvm_flush_dcache_to_poc(va, PAGE_SIZE); - - pfn++; - size -= PAGE_SIZE; - - kunmap_atomic(va); - } -} - -static inline void __kvm_flush_dcache_pud(pud_t pud) -{ -} - -#define kvm_virt_to_phys(x) virt_to_idmap((unsigned long)(x)) - -void kvm_set_way_flush(struct kvm_vcpu *vcpu); -void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled); - -static inline bool __kvm_cpu_uses_extended_idmap(void) -{ - return false; -} - -static inline unsigned long __kvm_idmap_ptrs_per_pgd(void) -{ - return PTRS_PER_PGD; -} - -static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd, - pgd_t *hyp_pgd, - pgd_t *merged_hyp_pgd, - unsigned long hyp_idmap_start) { } - -static inline unsigned int kvm_get_vmid_bits(void) -{ - return 8; -} - -/* - * We are not in the kvm->srcu critical section most of the time, so we take - * the SRCU read lock here. Since we copy the data from the user page, we - * can immediately drop the lock again. - */ -static inline int kvm_read_guest_lock(struct kvm *kvm, - gpa_t gpa, void *data, unsigned long len) -{ - int srcu_idx = srcu_read_lock(&kvm->srcu); - int ret = kvm_read_guest(kvm, gpa, data, len); - - srcu_read_unlock(&kvm->srcu, srcu_idx); - - return ret; -} - -static inline int kvm_write_guest_lock(struct kvm *kvm, gpa_t gpa, - const void *data, unsigned long len) -{ - int srcu_idx = srcu_read_lock(&kvm->srcu); - int ret = kvm_write_guest(kvm, gpa, data, len); - - srcu_read_unlock(&kvm->srcu, srcu_idx); - - return ret; -} - -static inline void *kvm_get_hyp_vector(void) -{ - switch(read_cpuid_part()) { -#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR - case ARM_CPU_PART_CORTEX_A12: - case ARM_CPU_PART_CORTEX_A17: - { - extern char __kvm_hyp_vector_bp_inv[]; - return kvm_ksym_ref(__kvm_hyp_vector_bp_inv); - } - - case ARM_CPU_PART_BRAHMA_B15: - case ARM_CPU_PART_CORTEX_A15: - { - extern char __kvm_hyp_vector_ic_inv[]; - return kvm_ksym_ref(__kvm_hyp_vector_ic_inv); - } -#endif - default: - { - extern char __kvm_hyp_vector[]; - return kvm_ksym_ref(__kvm_hyp_vector); - } - } -} - -static inline int kvm_map_vectors(void) -{ - return 0; -} - -static inline int hyp_map_aux_data(void) -{ - return 0; -} - -#define kvm_phys_to_vttbr(addr) (addr) - -static inline void kvm_set_ipa_limit(void) {} - -static __always_inline u64 kvm_get_vttbr(struct kvm *kvm) -{ - struct kvm_vmid *vmid = &kvm->arch.vmid; - u64 vmid_field, baddr; - - baddr = kvm->arch.pgd_phys; - vmid_field = (u64)vmid->vmid << VTTBR_VMID_SHIFT; - return kvm_phys_to_vttbr(baddr) | vmid_field; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/kvm_ras.h b/arch/arm/include/asm/kvm_ras.h deleted file mode 100644 index e9577292dfe4..000000000000 --- a/arch/arm/include/asm/kvm_ras.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright (C) 2018 - Arm Ltd */ - -#ifndef __ARM_KVM_RAS_H__ -#define __ARM_KVM_RAS_H__ - -#include <linux/types.h> - -static inline int kvm_handle_guest_sea(phys_addr_t addr, unsigned int esr) -{ - return -1; -} - -#endif /* __ARM_KVM_RAS_H__ */ diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 182163b55546..4b0df09cbe67 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -37,30 +37,6 @@ struct mod_arch_specific { struct module; u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val); -/* - * Add the ARM architecture version to the version magic string - */ -#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " " - -/* Add __virt_to_phys patching state as well */ -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT -#define MODULE_ARCH_VERMAGIC_P2V "p2v8 " -#else -#define MODULE_ARCH_VERMAGIC_P2V "" -#endif - -/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */ -#ifdef CONFIG_THUMB2_KERNEL -#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 " -#else -#define MODULE_ARCH_VERMAGIC_ARMTHUMB "" -#endif - -#define MODULE_ARCH_VERMAGIC \ - MODULE_ARCH_VERMAGIC_ARMVSN \ - MODULE_ARCH_VERMAGIC_ARMTHUMB \ - MODULE_ARCH_VERMAGIC_P2V - #ifdef CONFIG_THUMB2_KERNEL #define HAVE_ARCH_KALLSYMS_SYMBOL_VALUE static inline unsigned long kallsyms_symbol_value(const Elf_Sym *sym) diff --git a/arch/arm/include/asm/nwflash.h b/arch/arm/include/asm/nwflash.h index 0ec6f07c2d8a..66b7e68c9b58 100644 --- a/arch/arm/include/asm/nwflash.h +++ b/arch/arm/include/asm/nwflash.h @@ -2,7 +2,6 @@ #ifndef _FLASH_H #define _FLASH_H -#define FLASH_MINOR 160 /* MAJOR is 10 - miscdevice */ #define CMD_WRITE_DISABLE 0 #define CMD_WRITE_ENABLE 0x28 #define CMD_WRITE_BASE64K_ENABLE 0x47 diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index c2b75cba26df..11b058a72a5b 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -161,9 +161,7 @@ extern int pfn_valid(unsigned long); #endif /* !__ASSEMBLY__ */ -#define VM_DATA_DEFAULT_FLAGS \ - (((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ - VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) +#define VM_DATA_DEFAULT_FLAGS VM_DATA_FLAGS_TSK_EXEC #include <asm-generic/getorder.h> diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 0d3ea35c97fe..9e084a464a97 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -211,8 +211,6 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) #define pmd_addr_end(addr,end) (end) #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) -#define pte_special(pte) (0) -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } /* * We don't have huge page support for short descriptors, for the moment diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index ad55ab068dbf..36805f94939e 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -104,26 +104,6 @@ */ #define L_PGD_SWAPPER (_AT(pgdval_t, 1) << 55) /* swapper_pg_dir entry */ -/* - * 2nd stage PTE definitions for LPAE. - */ -#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x0) << 2) /* strongly ordered */ -#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* normal inner write-through */ -#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* normal inner write-back */ -#define L_PTE_S2_MT_DEV_SHARED (_AT(pteval_t, 0x1) << 2) /* device */ -#define L_PTE_S2_MT_MASK (_AT(pteval_t, 0xf) << 2) - -#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ -#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ - -#define L_PMD_S2_RDONLY (_AT(pmdval_t, 1) << 6) /* HAP[1] */ -#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ - -/* - * Hyp-mode PL2 PTE definitions for LPAE. - */ -#define L_PTE_HYP L_PTE_USER - #ifndef __ASSEMBLY__ #define pud_none(pud) (!pud_val(pud)) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index eabcb48a7840..befc8fcec98f 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -80,9 +80,6 @@ extern void __pgd_error(const char *file, int line, pgd_t); extern pgprot_t pgprot_user; extern pgprot_t pgprot_kernel; -extern pgprot_t pgprot_hyp_device; -extern pgprot_t pgprot_s2; -extern pgprot_t pgprot_s2_device; #define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b)) @@ -95,12 +92,6 @@ extern pgprot_t pgprot_s2_device; #define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY) #define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN) #define PAGE_KERNEL_EXEC pgprot_kernel -#define PAGE_HYP _MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_XN) -#define PAGE_HYP_EXEC _MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY) -#define PAGE_HYP_RO _MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY | L_PTE_XN) -#define PAGE_HYP_DEVICE _MOD_PROT(pgprot_hyp_device, L_PTE_HYP) -#define PAGE_S2 _MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY | L_PTE_XN) -#define PAGE_S2_DEVICE _MOD_PROT(pgprot_s2_device, L_PTE_S2_RDONLY | L_PTE_XN) #define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE) #define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN) @@ -252,19 +243,8 @@ static inline void __sync_icache_dcache(pte_t pteval) extern void __sync_icache_dcache(pte_t pteval); #endif -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval) -{ - unsigned long ext = 0; - - if (addr < TASK_SIZE && pte_valid_user(pteval)) { - if (!pte_special(pteval)) - __sync_icache_dcache(pteval); - ext |= PTE_EXT_NG; - } - - set_pte_ext(ptep, pteval, ext); -} +void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval); static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot) { diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 614bf829e454..b9241051e5cb 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -14,6 +14,7 @@ #include <asm/ptrace.h> #include <asm/types.h> #include <asm/unified.h> +#include <asm/vdso/processor.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ @@ -85,16 +86,6 @@ extern void release_thread(struct task_struct *); unsigned long get_wchan(struct task_struct *p); -#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327) -#define cpu_relax() \ - do { \ - smp_mb(); \ - __asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \ - } while (0) -#else -#define cpu_relax() barrier() -#endif - #define task_pt_regs(p) \ ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h index 4ceb4f757d4d..700b8bcdf9bd 100644 --- a/arch/arm/include/asm/sections.h +++ b/arch/arm/include/asm/sections.h @@ -10,8 +10,6 @@ extern char __idmap_text_start[]; extern char __idmap_text_end[]; extern char __entry_text_start[]; extern char __entry_text_end[]; -extern char __hyp_idmap_text_start[]; -extern char __hyp_idmap_text_end[]; static inline bool in_entry_text(unsigned long addr) { @@ -22,9 +20,7 @@ static inline bool in_entry_text(unsigned long addr) static inline bool in_idmap_text(unsigned long addr) { void *a = (void *)addr; - return memory_contains(__idmap_text_start, __idmap_text_end, a, 1) || - memory_contains(__hyp_idmap_text_start, __hyp_idmap_text_end, - a, 1); + return memory_contains(__idmap_text_start, __idmap_text_end, a, 1); } #endif /* _ASM_ARM_SECTIONS_H */ diff --git a/arch/arm/include/asm/stage2_pgtable.h b/arch/arm/include/asm/stage2_pgtable.h deleted file mode 100644 index aaceec7855ec..000000000000 --- a/arch/arm/include/asm/stage2_pgtable.h +++ /dev/null @@ -1,75 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2016 - ARM Ltd - * - * stage2 page table helpers - */ - -#ifndef __ARM_S2_PGTABLE_H_ -#define __ARM_S2_PGTABLE_H_ - -/* - * kvm_mmu_cache_min_pages() is the number of pages required - * to install a stage-2 translation. We pre-allocate the entry - * level table at VM creation. Since we have a 3 level page-table, - * we need only two pages to add a new mapping. - */ -#define kvm_mmu_cache_min_pages(kvm) 2 - -#define stage2_pgd_none(kvm, pgd) pgd_none(pgd) -#define stage2_pgd_clear(kvm, pgd) pgd_clear(pgd) -#define stage2_pgd_present(kvm, pgd) pgd_present(pgd) -#define stage2_pgd_populate(kvm, pgd, pud) pgd_populate(NULL, pgd, pud) -#define stage2_pud_offset(kvm, pgd, address) pud_offset(pgd, address) -#define stage2_pud_free(kvm, pud) do { } while (0) - -#define stage2_pud_none(kvm, pud) pud_none(pud) -#define stage2_pud_clear(kvm, pud) pud_clear(pud) -#define stage2_pud_present(kvm, pud) pud_present(pud) -#define stage2_pud_populate(kvm, pud, pmd) pud_populate(NULL, pud, pmd) -#define stage2_pmd_offset(kvm, pud, address) pmd_offset(pud, address) -#define stage2_pmd_free(kvm, pmd) free_page((unsigned long)pmd) - -#define stage2_pud_huge(kvm, pud) pud_huge(pud) - -/* Open coded p*d_addr_end that can deal with 64bit addresses */ -static inline phys_addr_t -stage2_pgd_addr_end(struct kvm *kvm, phys_addr_t addr, phys_addr_t end) -{ - phys_addr_t boundary = (addr + PGDIR_SIZE) & PGDIR_MASK; - - return (boundary - 1 < end - 1) ? boundary : end; -} - -#define stage2_pud_addr_end(kvm, addr, end) (end) - -static inline phys_addr_t -stage2_pmd_addr_end(struct kvm *kvm, phys_addr_t addr, phys_addr_t end) -{ - phys_addr_t boundary = (addr + PMD_SIZE) & PMD_MASK; - - return (boundary - 1 < end - 1) ? boundary : end; -} - -#define stage2_pgd_index(kvm, addr) pgd_index(addr) - -#define stage2_pte_table_empty(kvm, ptep) kvm_page_empty(ptep) -#define stage2_pmd_table_empty(kvm, pmdp) kvm_page_empty(pmdp) -#define stage2_pud_table_empty(kvm, pudp) false - -static inline bool kvm_stage2_has_pud(struct kvm *kvm) -{ - return false; -} - -#define S2_PMD_MASK PMD_MASK -#define S2_PMD_SIZE PMD_SIZE -#define S2_PUD_MASK PUD_MASK -#define S2_PUD_SIZE PUD_SIZE - -static inline bool kvm_stage2_has_pmd(struct kvm *kvm) -{ - return true; -} - -#endif /* __ARM_S2_PGTABLE_H_ */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 0d0d5178e2c3..3609a6980c34 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -141,7 +141,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp *, #define TIF_SYSCALL_TRACEPOINT 6 /* syscall tracepoint instrumentation */ #define TIF_SECCOMP 7 /* seccomp syscall filtering active */ -#define TIF_NOHZ 12 /* in adaptive nohz mode */ #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index 8a0fae94d45e..435aba289fc5 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -16,6 +16,9 @@ /* Enable topology flag updates */ #define arch_update_cpu_topology topology_update_cpu_topology +/* Replace task scheduler's default thermal pressure retrieve API */ +#define arch_scale_thermal_pressure topology_get_thermal_pressure + #else static inline void init_cpu_topology(void) { } diff --git a/arch/arm/include/asm/vdso/clocksource.h b/arch/arm/include/asm/vdso/clocksource.h new file mode 100644 index 000000000000..50c0b19fb755 --- /dev/null +++ b/arch/arm/include/asm/vdso/clocksource.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_VDSOCLOCKSOURCE_H +#define __ASM_VDSOCLOCKSOURCE_H + +#define VDSO_ARCH_CLOCKMODES \ + VDSO_CLOCKMODE_ARCHTIMER + +#endif /* __ASM_VDSOCLOCKSOURCE_H */ diff --git a/arch/arm/include/asm/vdso/cp15.h b/arch/arm/include/asm/vdso/cp15.h new file mode 100644 index 000000000000..bed16fa1865e --- /dev/null +++ b/arch/arm/include/asm/vdso/cp15.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 ARM Ltd. + */ +#ifndef __ASM_VDSO_CP15_H +#define __ASM_VDSO_CP15_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_CPU_CP15 + +#include <linux/stringify.h> + +#define __ACCESS_CP15(CRn, Op1, CRm, Op2) \ + "mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32 +#define __ACCESS_CP15_64(Op1, CRm) \ + "mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64 + +#define __read_sysreg(r, w, c, t) ({ \ + t __val; \ + asm volatile(r " " c : "=r" (__val)); \ + __val; \ +}) +#define read_sysreg(...) __read_sysreg(__VA_ARGS__) + +#define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v))) +#define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__) + +#define BPIALL __ACCESS_CP15(c7, 0, c5, 6) +#define ICIALLU __ACCESS_CP15(c7, 0, c5, 0) + +#define CNTVCT __ACCESS_CP15_64(1, c14) + +#endif /* CONFIG_CPU_CP15 */ + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_VDSO_CP15_H */ diff --git a/arch/arm/include/asm/vdso/gettimeofday.h b/arch/arm/include/asm/vdso/gettimeofday.h index fe6e1f65932d..36dc18553ed8 100644 --- a/arch/arm/include/asm/vdso/gettimeofday.h +++ b/arch/arm/include/asm/vdso/gettimeofday.h @@ -7,9 +7,9 @@ #ifndef __ASSEMBLY__ -#include <asm/barrier.h> -#include <asm/cp15.h> +#include <asm/errno.h> #include <asm/unistd.h> +#include <asm/vdso/cp15.h> #include <uapi/linux/time.h> #define VDSO_HAS_CLOCK_GETRES 1 @@ -106,20 +106,32 @@ static __always_inline int clock_getres32_fallback( return ret; } +static inline bool arm_vdso_hres_capable(void) +{ + return IS_ENABLED(CONFIG_ARM_ARCH_TIMER); +} +#define __arch_vdso_hres_capable arm_vdso_hres_capable + static __always_inline u64 __arch_get_hw_counter(int clock_mode) { #ifdef CONFIG_ARM_ARCH_TIMER u64 cycle_now; - if (!clock_mode) - return -EINVAL; + /* + * Core checks for mode already, so this raced against a concurrent + * update. Return something. Core will do another round and then + * see the mode change and fallback to the syscall. + */ + if (clock_mode == VDSO_CLOCKMODE_NONE) + return 0; isb(); cycle_now = read_sysreg(CNTVCT); return cycle_now; #else - return -EINVAL; /* use fallback */ + /* Make GCC happy. This is compiled out anyway */ + return 0; #endif } diff --git a/arch/arm/include/asm/vdso/processor.h b/arch/arm/include/asm/vdso/processor.h new file mode 100644 index 000000000000..45efb3ff511c --- /dev/null +++ b/arch/arm/include/asm/vdso/processor.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 ARM Ltd. + */ +#ifndef __ASM_VDSO_PROCESSOR_H +#define __ASM_VDSO_PROCESSOR_H + +#ifndef __ASSEMBLY__ + +#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327) +#define cpu_relax() \ + do { \ + smp_mb(); \ + __asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \ + } while (0) +#else +#define cpu_relax() barrier() +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_VDSO_PROCESSOR_H */ diff --git a/arch/arm/include/asm/vdso/vsyscall.h b/arch/arm/include/asm/vdso/vsyscall.h index cff87d8d30da..47e41ae8ccd0 100644 --- a/arch/arm/include/asm/vdso/vsyscall.h +++ b/arch/arm/include/asm/vdso/vsyscall.h @@ -11,18 +11,6 @@ extern struct vdso_data *vdso_data; extern bool cntvct_ok; -static __always_inline -bool tk_is_cntvct(const struct timekeeper *tk) -{ - if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) - return false; - - if (!tk->tkr_mono.clock->archdata.vdso_direct) - return false; - - return true; -} - /* * Update the vDSO data page to keep in sync with kernel timekeeping. */ @@ -34,29 +22,6 @@ struct vdso_data *__arm_get_k_vdso_data(void) #define __arch_get_k_vdso_data __arm_get_k_vdso_data static __always_inline -bool __arm_update_vdso_data(void) -{ - return cntvct_ok; -} -#define __arch_update_vdso_data __arm_update_vdso_data - -static __always_inline -int __arm_get_clock_mode(struct timekeeper *tk) -{ - u32 __tk_is_cntvct = tk_is_cntvct(tk); - - return __tk_is_cntvct; -} -#define __arch_get_clock_mode __arm_get_clock_mode - -static __always_inline -int __arm_use_vsyscall(struct vdso_data *vdata) -{ - return vdata[CS_HRES_COARSE].clock_mode; -} -#define __arch_use_vsyscall __arm_use_vsyscall - -static __always_inline void __arm_sync_vdso_data(struct vdso_data *vdata) { flush_dcache_page(virt_to_page(vdata)); diff --git a/arch/arm/include/asm/vermagic.h b/arch/arm/include/asm/vermagic.h new file mode 100644 index 000000000000..62ce94e26a63 --- /dev/null +++ b/arch/arm/include/asm/vermagic.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_VERMAGIC_H +#define _ASM_VERMAGIC_H + +#include <linux/stringify.h> + +/* + * Add the ARM architecture version to the version magic string + */ +#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " " + +/* Add __virt_to_phys patching state as well */ +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT +#define MODULE_ARCH_VERMAGIC_P2V "p2v8 " +#else +#define MODULE_ARCH_VERMAGIC_P2V "" +#endif + +/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */ +#ifdef CONFIG_THUMB2_KERNEL +#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 " +#else +#define MODULE_ARCH_VERMAGIC_ARMTHUMB "" +#endif + +#define MODULE_ARCH_VERMAGIC \ + MODULE_ARCH_VERMAGIC_ARMVSN \ + MODULE_ARCH_VERMAGIC_ARMTHUMB \ + MODULE_ARCH_VERMAGIC_P2V + +#endif /* _ASM_VERMAGIC_H */ diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index 17c26ccd126d..dd9697b2bde8 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -39,8 +39,6 @@ static inline void sync_boot_mode(void) sync_cache_r(&__boot_cpu_mode); } -void __hyp_set_vectors(unsigned long phys_vector_base); -void __hyp_reset_vectors(void); #else #define __boot_cpu_mode (SVC_MODE) #define sync_boot_mode() @@ -67,18 +65,6 @@ static inline bool is_kernel_in_hyp_mode(void) return false; } -static inline bool has_vhe(void) -{ - return false; -} - -/* The section containing the hypervisor idmap text */ -extern char __hyp_idmap_text_start[]; -extern char __hyp_idmap_text_end[]; - -/* The section containing the hypervisor text */ -extern char __hyp_text_start[]; -extern char __hyp_text_end[]; #endif #else @@ -87,9 +73,6 @@ extern char __hyp_text_end[]; #define HVC_SET_VECTORS 0 #define HVC_SOFT_RESTART 1 -#define HVC_RESET_VECTORS 2 - -#define HVC_STUB_HCALL_NR 3 #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S index 1abb32f685fd..f3c4a37210ed 100644 --- a/arch/arm/include/debug/stm32.S +++ b/arch/arm/include/debug/stm32.S @@ -4,14 +4,13 @@ * Author: Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics. */ -#define STM32_UART_BASE 0x40011000 /* USART1 */ - #ifdef CONFIG_STM32F4_DEBUG_UART #define STM32_USART_SR_OFF 0x00 #define STM32_USART_TDR_OFF 0x04 #endif -#ifdef CONFIG_STM32F7_DEBUG_UART +#if defined(CONFIG_STM32F7_DEBUG_UART) || defined(CONFIG_STM32H7_DEBUG_UART) || \ + defined(CONFIG_STM32MP1_DEBUG_UART) #define STM32_USART_SR_OFF 0x1C #define STM32_USART_TDR_OFF 0x28 #endif @@ -20,8 +19,8 @@ #define STM32_USART_TXE (1 << 7) /* Tx data reg empty */ .macro addruart, rp, rv, tmp - ldr \rp, =STM32_UART_BASE @ physical base - ldr \rv, =STM32_UART_BASE @ virt base /* NoMMU */ + ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical base + ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virt base .endm .macro senduart,rd,rx diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h deleted file mode 100644 index 03cd7c19a683..000000000000 --- a/arch/arm/include/uapi/asm/kvm.h +++ /dev/null @@ -1,314 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef __ARM_KVM_H__ -#define __ARM_KVM_H__ - -#include <linux/types.h> -#include <linux/psci.h> -#include <asm/ptrace.h> - -#define __KVM_HAVE_GUEST_DEBUG -#define __KVM_HAVE_IRQ_LINE -#define __KVM_HAVE_READONLY_MEM -#define __KVM_HAVE_VCPU_EVENTS - -#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 - -#define KVM_REG_SIZE(id) \ - (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) - -/* Valid for svc_regs, abt_regs, und_regs, irq_regs in struct kvm_regs */ -#define KVM_ARM_SVC_sp svc_regs[0] -#define KVM_ARM_SVC_lr svc_regs[1] -#define KVM_ARM_SVC_spsr svc_regs[2] -#define KVM_ARM_ABT_sp abt_regs[0] -#define KVM_ARM_ABT_lr abt_regs[1] -#define KVM_ARM_ABT_spsr abt_regs[2] -#define KVM_ARM_UND_sp und_regs[0] -#define KVM_ARM_UND_lr und_regs[1] -#define KVM_ARM_UND_spsr und_regs[2] -#define KVM_ARM_IRQ_sp irq_regs[0] -#define KVM_ARM_IRQ_lr irq_regs[1] -#define KVM_ARM_IRQ_spsr irq_regs[2] - -/* Valid only for fiq_regs in struct kvm_regs */ -#define KVM_ARM_FIQ_r8 fiq_regs[0] -#define KVM_ARM_FIQ_r9 fiq_regs[1] -#define KVM_ARM_FIQ_r10 fiq_regs[2] -#define KVM_ARM_FIQ_fp fiq_regs[3] -#define KVM_ARM_FIQ_ip fiq_regs[4] -#define KVM_ARM_FIQ_sp fiq_regs[5] -#define KVM_ARM_FIQ_lr fiq_regs[6] -#define KVM_ARM_FIQ_spsr fiq_regs[7] - -struct kvm_regs { - struct pt_regs usr_regs; /* R0_usr - R14_usr, PC, CPSR */ - unsigned long svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */ - unsigned long abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */ - unsigned long und_regs[3]; /* SP_und, LR_und, SPSR_und */ - unsigned long irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */ - unsigned long fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */ -}; - -/* Supported Processor Types */ -#define KVM_ARM_TARGET_CORTEX_A15 0 -#define KVM_ARM_TARGET_CORTEX_A7 1 -#define KVM_ARM_NUM_TARGETS 2 - -/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ -#define KVM_ARM_DEVICE_TYPE_SHIFT 0 -#define KVM_ARM_DEVICE_TYPE_MASK (0xffff << KVM_ARM_DEVICE_TYPE_SHIFT) -#define KVM_ARM_DEVICE_ID_SHIFT 16 -#define KVM_ARM_DEVICE_ID_MASK (0xffff << KVM_ARM_DEVICE_ID_SHIFT) - -/* Supported device IDs */ -#define KVM_ARM_DEVICE_VGIC_V2 0 - -/* Supported VGIC address types */ -#define KVM_VGIC_V2_ADDR_TYPE_DIST 0 -#define KVM_VGIC_V2_ADDR_TYPE_CPU 1 - -#define KVM_VGIC_V2_DIST_SIZE 0x1000 -#define KVM_VGIC_V2_CPU_SIZE 0x2000 - -/* Supported VGICv3 address types */ -#define KVM_VGIC_V3_ADDR_TYPE_DIST 2 -#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 -#define KVM_VGIC_ITS_ADDR_TYPE 4 -#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5 - -#define KVM_VGIC_V3_DIST_SIZE SZ_64K -#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) -#define KVM_VGIC_V3_ITS_SIZE (2 * SZ_64K) - -#define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ -#define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ - -struct kvm_vcpu_init { - __u32 target; - __u32 features[7]; -}; - -struct kvm_sregs { -}; - -struct kvm_fpu { -}; - -struct kvm_guest_debug_arch { -}; - -struct kvm_debug_exit_arch { -}; - -struct kvm_sync_regs { - /* Used with KVM_CAP_ARM_USER_IRQ */ - __u64 device_irq_level; -}; - -struct kvm_arch_memory_slot { -}; - -/* for KVM_GET/SET_VCPU_EVENTS */ -struct kvm_vcpu_events { - struct { - __u8 serror_pending; - __u8 serror_has_esr; - __u8 ext_dabt_pending; - /* Align it to 8 bytes */ - __u8 pad[5]; - __u64 serror_esr; - } exception; - __u32 reserved[12]; -}; - -/* If you need to interpret the index values, here is the key: */ -#define KVM_REG_ARM_COPROC_MASK 0x000000000FFF0000 -#define KVM_REG_ARM_COPROC_SHIFT 16 -#define KVM_REG_ARM_32_OPC2_MASK 0x0000000000000007 -#define KVM_REG_ARM_32_OPC2_SHIFT 0 -#define KVM_REG_ARM_OPC1_MASK 0x0000000000000078 -#define KVM_REG_ARM_OPC1_SHIFT 3 -#define KVM_REG_ARM_CRM_MASK 0x0000000000000780 -#define KVM_REG_ARM_CRM_SHIFT 7 -#define KVM_REG_ARM_32_CRN_MASK 0x0000000000007800 -#define KVM_REG_ARM_32_CRN_SHIFT 11 -/* - * For KVM currently all guest registers are nonsecure, but we reserve a bit - * in the encoding to distinguish secure from nonsecure for AArch32 system - * registers that are banked by security. This is 1 for the secure banked - * register, and 0 for the nonsecure banked register or if the register is - * not banked by security. - */ -#define KVM_REG_ARM_SECURE_MASK 0x0000000010000000 -#define KVM_REG_ARM_SECURE_SHIFT 28 - -#define ARM_CP15_REG_SHIFT_MASK(x,n) \ - (((x) << KVM_REG_ARM_ ## n ## _SHIFT) & KVM_REG_ARM_ ## n ## _MASK) - -#define __ARM_CP15_REG(op1,crn,crm,op2) \ - (KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT) | \ - ARM_CP15_REG_SHIFT_MASK(op1, OPC1) | \ - ARM_CP15_REG_SHIFT_MASK(crn, 32_CRN) | \ - ARM_CP15_REG_SHIFT_MASK(crm, CRM) | \ - ARM_CP15_REG_SHIFT_MASK(op2, 32_OPC2)) - -#define ARM_CP15_REG32(...) (__ARM_CP15_REG(__VA_ARGS__) | KVM_REG_SIZE_U32) - -#define __ARM_CP15_REG64(op1,crm) \ - (__ARM_CP15_REG(op1, 0, crm, 0) | KVM_REG_SIZE_U64) -#define ARM_CP15_REG64(...) __ARM_CP15_REG64(__VA_ARGS__) - -/* PL1 Physical Timer Registers */ -#define KVM_REG_ARM_PTIMER_CTL ARM_CP15_REG32(0, 14, 2, 1) -#define KVM_REG_ARM_PTIMER_CNT ARM_CP15_REG64(0, 14) -#define KVM_REG_ARM_PTIMER_CVAL ARM_CP15_REG64(2, 14) - -/* Virtual Timer Registers */ -#define KVM_REG_ARM_TIMER_CTL ARM_CP15_REG32(0, 14, 3, 1) -#define KVM_REG_ARM_TIMER_CNT ARM_CP15_REG64(1, 14) -#define KVM_REG_ARM_TIMER_CVAL ARM_CP15_REG64(3, 14) - -/* Normal registers are mapped as coprocessor 16. */ -#define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT) -#define KVM_REG_ARM_CORE_REG(name) (offsetof(struct kvm_regs, name) / 4) - -/* Some registers need more space to represent values. */ -#define KVM_REG_ARM_DEMUX (0x0011 << KVM_REG_ARM_COPROC_SHIFT) -#define KVM_REG_ARM_DEMUX_ID_MASK 0x000000000000FF00 -#define KVM_REG_ARM_DEMUX_ID_SHIFT 8 -#define KVM_REG_ARM_DEMUX_ID_CCSIDR (0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT) -#define KVM_REG_ARM_DEMUX_VAL_MASK 0x00000000000000FF -#define KVM_REG_ARM_DEMUX_VAL_SHIFT 0 - -/* VFP registers: we could overload CP10 like ARM does, but that's ugly. */ -#define KVM_REG_ARM_VFP (0x0012 << KVM_REG_ARM_COPROC_SHIFT) -#define KVM_REG_ARM_VFP_MASK 0x000000000000FFFF -#define KVM_REG_ARM_VFP_BASE_REG 0x0 -#define KVM_REG_ARM_VFP_FPSID 0x1000 -#define KVM_REG_ARM_VFP_FPSCR 0x1001 -#define KVM_REG_ARM_VFP_MVFR1 0x1006 -#define KVM_REG_ARM_VFP_MVFR0 0x1007 -#define KVM_REG_ARM_VFP_FPEXC 0x1008 -#define KVM_REG_ARM_VFP_FPINST 0x1009 -#define KVM_REG_ARM_VFP_FPINST2 0x100A - -/* KVM-as-firmware specific pseudo-registers */ -#define KVM_REG_ARM_FW (0x0014 << KVM_REG_ARM_COPROC_SHIFT) -#define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM | KVM_REG_SIZE_U64 | \ - KVM_REG_ARM_FW | ((r) & 0xffff)) -#define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0) -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1) - /* Higher values mean better protection. */ -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0 -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1 -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2 -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2) - /* Higher values mean better protection. */ -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0 -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1 -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2 -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3 -#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4) - -/* Device Control API: ARM VGIC */ -#define KVM_DEV_ARM_VGIC_GRP_ADDR 0 -#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1 -#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 -#define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 -#define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) -#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 -#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ - (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) -#define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 -#define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) -#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) -#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 -#define KVM_DEV_ARM_VGIC_GRP_CTRL 4 -#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 -#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 -#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 -#define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8 -#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 -#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ - (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) -#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff -#define VGIC_LEVEL_INFO_LINE_LEVEL 0 - -/* Device Control API on vcpu fd */ -#define KVM_ARM_VCPU_PMU_V3_CTRL 0 -#define KVM_ARM_VCPU_PMU_V3_IRQ 0 -#define KVM_ARM_VCPU_PMU_V3_INIT 1 -#define KVM_ARM_VCPU_TIMER_CTRL 1 -#define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0 -#define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1 - -#define KVM_DEV_ARM_VGIC_CTRL_INIT 0 -#define KVM_DEV_ARM_ITS_SAVE_TABLES 1 -#define KVM_DEV_ARM_ITS_RESTORE_TABLES 2 -#define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3 -#define KVM_DEV_ARM_ITS_CTRL_RESET 4 - -/* KVM_IRQ_LINE irq field index values */ -#define KVM_ARM_IRQ_VCPU2_SHIFT 28 -#define KVM_ARM_IRQ_VCPU2_MASK 0xf -#define KVM_ARM_IRQ_TYPE_SHIFT 24 -#define KVM_ARM_IRQ_TYPE_MASK 0xf -#define KVM_ARM_IRQ_VCPU_SHIFT 16 -#define KVM_ARM_IRQ_VCPU_MASK 0xff -#define KVM_ARM_IRQ_NUM_SHIFT 0 -#define KVM_ARM_IRQ_NUM_MASK 0xffff - -/* irq_type field */ -#define KVM_ARM_IRQ_TYPE_CPU 0 -#define KVM_ARM_IRQ_TYPE_SPI 1 -#define KVM_ARM_IRQ_TYPE_PPI 2 - -/* out-of-kernel GIC cpu interrupt injection irq_number field */ -#define KVM_ARM_IRQ_CPU_IRQ 0 -#define KVM_ARM_IRQ_CPU_FIQ 1 - -/* - * This used to hold the highest supported SPI, but it is now obsolete - * and only here to provide source code level compatibility with older - * userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS. - */ -#ifndef __KERNEL__ -#define KVM_ARM_IRQ_GIC_MAX 127 -#endif - -/* One single KVM irqchip, ie. the VGIC */ -#define KVM_NR_IRQCHIPS 1 - -/* PSCI interface */ -#define KVM_PSCI_FN_BASE 0x95c1ba5e -#define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n)) - -#define KVM_PSCI_FN_CPU_SUSPEND KVM_PSCI_FN(0) -#define KVM_PSCI_FN_CPU_OFF KVM_PSCI_FN(1) -#define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2) -#define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3) - -#define KVM_PSCI_RET_SUCCESS PSCI_RET_SUCCESS -#define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED -#define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS -#define KVM_PSCI_RET_DENIED PSCI_RET_DENIED - -#endif /* __ARM_KVM_H__ */ diff --git a/arch/arm/kernel/.gitignore b/arch/arm/kernel/.gitignore index c5f676c3c224..bbb90f92d051 100644 --- a/arch/arm/kernel/.gitignore +++ b/arch/arm/kernel/.gitignore @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only vmlinux.lds diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index c773b829ee8e..c036a4a2f8e2 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -11,9 +11,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/dma-mapping.h> -#ifdef CONFIG_KVM_ARM_HOST -#include <linux/kvm_host.h> -#endif #include <asm/cacheflush.h> #include <asm/glue-df.h> #include <asm/glue-pf.h> @@ -167,14 +164,6 @@ int main(void) DEFINE(CACHE_WRITEBACK_ORDER, __CACHE_WRITEBACK_ORDER); DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE); BLANK(); -#ifdef CONFIG_KVM_ARM_HOST - DEFINE(VCPU_GUEST_CTXT, offsetof(struct kvm_vcpu, arch.ctxt)); - DEFINE(VCPU_HOST_CTXT, offsetof(struct kvm_vcpu, arch.host_cpu_context)); - DEFINE(CPU_CTXT_VFP, offsetof(struct kvm_cpu_context, vfp)); - DEFINE(CPU_CTXT_GP_REGS, offsetof(struct kvm_cpu_context, gp_regs)); - DEFINE(GP_REGS_USR, offsetof(struct kvm_regs, usr_regs)); -#endif - BLANK(); #ifdef CONFIG_VDSO DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store)); #endif diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 6607fa817bba..26d8e03b1dd3 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -189,19 +189,19 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE ENDPROC(__hyp_stub_install_secondary) __hyp_stub_do_trap: +#ifdef ZIMAGE teq r0, #HVC_SET_VECTORS bne 1f + /* Only the ZIMAGE stubs can change the HYP vectors */ mcr p15, 4, r1, c12, c0, 0 @ set HVBAR b __hyp_stub_exit +#endif 1: teq r0, #HVC_SOFT_RESTART - bne 1f + bne 2f bx r1 -1: teq r0, #HVC_RESET_VECTORS - beq __hyp_stub_exit - - ldr r0, =HVC_STUB_ERR +2: ldr r0, =HVC_STUB_ERR __ERET __hyp_stub_exit: @@ -210,26 +210,9 @@ __hyp_stub_exit: ENDPROC(__hyp_stub_do_trap) /* - * __hyp_set_vectors: Call this after boot to set the initial hypervisor - * vectors as part of hypervisor installation. On an SMP system, this should - * be called on each CPU. - * - * r0 must be the physical address of the new vector table (which must lie in - * the bottom 4GB of physical address space. - * - * r0 must be 32-byte aligned. - * - * Before calling this, you must check that the stub hypervisor is installed - * everywhere, by waiting for any secondary CPUs to be brought up and then - * checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true. - * - * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or - * something else went wrong... in such cases, trying to install a new - * hypervisor is unlikely to work as desired. - * - * When you call into your shiny new hypervisor, sp_hyp will contain junk, - * so you will need to set that to something sensible at the new hypervisor's - * initialisation entry point. + * __hyp_set_vectors is only used when ZIMAGE must bounce between HYP + * and SVC. For the kernel itself, the vectors are set once and for + * all by the stubs. */ ENTRY(__hyp_set_vectors) mov r1, r0 @@ -245,12 +228,6 @@ ENTRY(__hyp_soft_restart) ret lr ENDPROC(__hyp_soft_restart) -ENTRY(__hyp_reset_vectors) - mov r0, #HVC_RESET_VECTORS - __HVC(0) - ret lr -ENDPROC(__hyp_reset_vectors) - #ifndef ZIMAGE .align 2 .L__boot_cpu_mode_offset: diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c index bb18ed0539f4..0ce388f15422 100644 --- a/arch/arm/kernel/reboot.c +++ b/arch/arm/kernel/reboot.c @@ -88,11 +88,11 @@ void soft_restart(unsigned long addr) * to execute e.g. a RAM-based pin loop is not sufficient. This allows the * kexec'd kernel to use any and all RAM as it sees fit, without having to * avoid any code or data used by any SW CPU pin loop. The CPU hotplug - * functionality embodied in disable_nonboot_cpus() to achieve this. + * functionality embodied in smp_shutdown_nonboot_cpus() to achieve this. */ void machine_shutdown(void) { - disable_nonboot_cpus(); + smp_shutdown_nonboot_cpus(reboot_cpu); } /* diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 7eaa2ae7aff5..72a08786e16e 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -25,26 +25,26 @@ ENTRY(relocate_new_kernel) ldr r3, [r0],#4 /* Is it a destination page. Put destination address to r4 */ - tst r3,#1,0 + tst r3,#1 beq 1f bic r4,r3,#1 b 0b 1: /* Is it an indirection page */ - tst r3,#2,0 + tst r3,#2 beq 1f bic r0,r3,#2 b 0b 1: /* are we done ? */ - tst r3,#4,0 + tst r3,#4 beq 1f b 2f 1: /* is it source ? */ - tst r3,#8,0 + tst r3,#8 beq 0b bic r3,r3,#8 mov r6,#1024 diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 4574e6aea0a5..11a964fd66f4 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -444,7 +444,7 @@ int unwind_frame(struct stackframe *frame) ctrl.vrs[PC] = ctrl.vrs[LR]; /* check for infinite loop */ - if (frame->pc == ctrl.vrs[PC]) + if (frame->pc == ctrl.vrs[PC] && frame->sp == ctrl.vrs[SP]) return -URC_FAILURE; frame->fp = ctrl.vrs[FP]; diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 21b8b271c80d..6d2be994ae58 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -162,14 +162,6 @@ SECTIONS ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") -/* - * The HYP init code can't be more than a page long, - * and should not cross a page boundary. - * The above comment applies as well. - */ -ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, - "HYP init code too big or misaligned") - #ifdef CONFIG_XIP_DEFLATED_DATA /* * The .bss is used as a stack area for __inflate_kernel_data() whose stack diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 319ccb10846a..88a720da443b 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -170,12 +170,4 @@ __start_rodata_section_aligned = ALIGN(__start_rodata, 1 << SECTION_SHIFT); ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") -/* - * The HYP init code can't be more than a page long, - * and should not cross a page boundary. - * The above comment applies as well. - */ -ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, - "HYP init code too big or misaligned") - #endif /* CONFIG_XIP_KERNEL */ diff --git a/arch/arm/kernel/vmlinux.lds.h b/arch/arm/kernel/vmlinux.lds.h index 8247bc15addc..381a8e105fa5 100644 --- a/arch/arm/kernel/vmlinux.lds.h +++ b/arch/arm/kernel/vmlinux.lds.h @@ -31,20 +31,11 @@ *(.proc.info.init) \ __proc_info_end = .; -#define HYPERVISOR_TEXT \ - __hyp_text_start = .; \ - *(.hyp.text) \ - __hyp_text_end = .; - #define IDMAP_TEXT \ ALIGN_FUNCTION(); \ __idmap_text_start = .; \ *(.idmap.text) \ __idmap_text_end = .; \ - . = ALIGN(PAGE_SIZE); \ - __hyp_idmap_text_start = .; \ - *(.hyp.idmap.text) \ - __hyp_idmap_text_end = .; #define ARM_DISCARD \ *(.ARM.exidx.exit.text) \ @@ -72,7 +63,6 @@ SCHED_TEXT \ CPUIDLE_TEXT \ LOCK_TEXT \ - HYPERVISOR_TEXT \ KPROBES_TEXT \ *(.gnu.warning) \ *(.glue_7) \ diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig deleted file mode 100644 index f591026347a5..000000000000 --- a/arch/arm/kvm/Kconfig +++ /dev/null @@ -1,59 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# KVM configuration -# - -source "virt/kvm/Kconfig" -source "virt/lib/Kconfig" - -menuconfig VIRTUALIZATION - bool "Virtualization" - ---help--- - Say Y here to get to see options for using your Linux host to run - other operating systems inside virtual machines (guests). - This option alone does not add any kernel code. - - If you say N, all options in this submenu will be skipped and - disabled. - -if VIRTUALIZATION - -config KVM - bool "Kernel-based Virtual Machine (KVM) support" - depends on MMU && OF - select PREEMPT_NOTIFIERS - select ARM_GIC - select ARM_GIC_V3 - select ARM_GIC_V3_ITS - select HAVE_KVM_CPU_RELAX_INTERCEPT - select HAVE_KVM_ARCH_TLB_FLUSH_ALL - select KVM_MMIO - select KVM_ARM_HOST - select KVM_GENERIC_DIRTYLOG_READ_PROTECT - select SRCU - select MMU_NOTIFIER - select KVM_VFIO - select HAVE_KVM_EVENTFD - select HAVE_KVM_IRQFD - select HAVE_KVM_IRQCHIP - select HAVE_KVM_IRQ_ROUTING - select HAVE_KVM_MSI - select IRQ_BYPASS_MANAGER - select HAVE_KVM_IRQ_BYPASS - depends on ARM_VIRT_EXT && ARM_LPAE && ARM_ARCH_TIMER - ---help--- - Support hosting virtualized guest machines. - - This module provides access to the hardware capabilities through - a character device node named /dev/kvm. - - If unsure, say N. - -config KVM_ARM_HOST - bool - ---help--- - Provides host support for ARM processors. - -source "drivers/vhost/Kconfig" - -endif # VIRTUALIZATION diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile deleted file mode 100644 index e442d82821df..000000000000 --- a/arch/arm/kvm/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for Kernel-based Virtual Machine module -# - -plus_virt := $(call as-instr,.arch_extension virt,+virt) -ifeq ($(plus_virt),+virt) - plus_virt_def := -DREQUIRES_VIRT=1 -endif - -KVM := ../../../virt/kvm - -ccflags-y += -I $(srctree)/$(src) -I $(srctree)/virt/kvm/arm/vgic -CFLAGS_$(KVM)/arm/arm.o := $(plus_virt_def) - -AFLAGS_init.o := -Wa,-march=armv7-a$(plus_virt) -AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) - -kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o - -obj-$(CONFIG_KVM_ARM_HOST) += hyp/ - -obj-y += kvm-arm.o init.o interrupts.o -obj-y += handle_exit.o guest.o emulate.o reset.o -obj-y += coproc.o coproc_a15.o coproc_a7.o vgic-v3-coproc.o -obj-y += $(KVM)/arm/arm.o $(KVM)/arm/mmu.o $(KVM)/arm/mmio.o -obj-y += $(KVM)/arm/psci.o $(KVM)/arm/perf.o $(KVM)/arm/hypercalls.o -obj-y += $(KVM)/arm/aarch32.o - -obj-y += $(KVM)/arm/vgic/vgic.o -obj-y += $(KVM)/arm/vgic/vgic-init.o -obj-y += $(KVM)/arm/vgic/vgic-irqfd.o -obj-y += $(KVM)/arm/vgic/vgic-v2.o -obj-y += $(KVM)/arm/vgic/vgic-v3.o -obj-y += $(KVM)/arm/vgic/vgic-v4.o -obj-y += $(KVM)/arm/vgic/vgic-mmio.o -obj-y += $(KVM)/arm/vgic/vgic-mmio-v2.o -obj-y += $(KVM)/arm/vgic/vgic-mmio-v3.o -obj-y += $(KVM)/arm/vgic/vgic-kvm-device.o -obj-y += $(KVM)/arm/vgic/vgic-its.o -obj-y += $(KVM)/arm/vgic/vgic-debug.o -obj-y += $(KVM)/irqchip.o -obj-y += $(KVM)/arm/arch_timer.o diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c deleted file mode 100644 index 07745ee022a1..000000000000 --- a/arch/arm/kvm/coproc.c +++ /dev/null @@ -1,1455 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Authors: Rusty Russell <rusty@rustcorp.com.au> - * Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#include <linux/bsearch.h> -#include <linux/mm.h> -#include <linux/kvm_host.h> -#include <linux/uaccess.h> -#include <asm/kvm_arm.h> -#include <asm/kvm_host.h> -#include <asm/kvm_emulate.h> -#include <asm/kvm_coproc.h> -#include <asm/kvm_mmu.h> -#include <asm/cacheflush.h> -#include <asm/cputype.h> -#include <trace/events/kvm.h> -#include <asm/vfp.h> -#include "../vfp/vfpinstr.h" - -#define CREATE_TRACE_POINTS -#include "trace.h" -#include "coproc.h" - - -/****************************************************************************** - * Co-processor emulation - *****************************************************************************/ - -static bool write_to_read_only(struct kvm_vcpu *vcpu, - const struct coproc_params *params) -{ - WARN_ONCE(1, "CP15 write to read-only register\n"); - print_cp_instr(params); - kvm_inject_undefined(vcpu); - return false; -} - -static bool read_from_write_only(struct kvm_vcpu *vcpu, - const struct coproc_params *params) -{ - WARN_ONCE(1, "CP15 read to write-only register\n"); - print_cp_instr(params); - kvm_inject_undefined(vcpu); - return false; -} - -/* 3 bits per cache level, as per CLIDR, but non-existent caches always 0 */ -static u32 cache_levels; - -/* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */ -#define CSSELR_MAX 12 - -/* - * kvm_vcpu_arch.cp15 holds cp15 registers as an array of u32, but some - * of cp15 registers can be viewed either as couple of two u32 registers - * or one u64 register. Current u64 register encoding is that least - * significant u32 word is followed by most significant u32 word. - */ -static inline void vcpu_cp15_reg64_set(struct kvm_vcpu *vcpu, - const struct coproc_reg *r, - u64 val) -{ - vcpu_cp15(vcpu, r->reg) = val & 0xffffffff; - vcpu_cp15(vcpu, r->reg + 1) = val >> 32; -} - -static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu, - const struct coproc_reg *r) -{ - u64 val; - - val = vcpu_cp15(vcpu, r->reg + 1); - val = val << 32; - val = val | vcpu_cp15(vcpu, r->reg); - return val; -} - -int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - kvm_inject_undefined(vcpu); - return 1; -} - -int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* - * We can get here, if the host has been built without VFPv3 support, - * but the guest attempted a floating point operation. - */ - kvm_inject_undefined(vcpu); - return 1; -} - -int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - kvm_inject_undefined(vcpu); - return 1; -} - -static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) -{ - /* - * Compute guest MPIDR. We build a virtual cluster out of the - * vcpu_id, but we read the 'U' bit from the underlying - * hardware directly. - */ - vcpu_cp15(vcpu, c0_MPIDR) = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) | - ((vcpu->vcpu_id >> 2) << MPIDR_LEVEL_BITS) | - (vcpu->vcpu_id & 3)); -} - -/* TRM entries A7:4.3.31 A15:4.3.28 - RO WI */ -static bool access_actlr(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - if (p->is_write) - return ignore_write(vcpu, p); - - *vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c1_ACTLR); - return true; -} - -/* TRM entries A7:4.3.56, A15:4.3.60 - R/O. */ -static bool access_cbar(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - if (p->is_write) - return write_to_read_only(vcpu, p); - return read_zero(vcpu, p); -} - -/* TRM entries A7:4.3.49, A15:4.3.48 - R/O WI */ -static bool access_l2ctlr(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - if (p->is_write) - return ignore_write(vcpu, p); - - *vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c9_L2CTLR); - return true; -} - -static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) -{ - u32 l2ctlr, ncores; - - asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr)); - l2ctlr &= ~(3 << 24); - ncores = atomic_read(&vcpu->kvm->online_vcpus) - 1; - /* How many cores in the current cluster and the next ones */ - ncores -= (vcpu->vcpu_id & ~3); - /* Cap it to the maximum number of cores in a single cluster */ - ncores = min(ncores, 3U); - l2ctlr |= (ncores & 3) << 24; - - vcpu_cp15(vcpu, c9_L2CTLR) = l2ctlr; -} - -static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) -{ - u32 actlr; - - /* ACTLR contains SMP bit: make sure you create all cpus first! */ - asm volatile("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr)); - /* Make the SMP bit consistent with the guest configuration */ - if (atomic_read(&vcpu->kvm->online_vcpus) > 1) - actlr |= 1U << 6; - else - actlr &= ~(1U << 6); - - vcpu_cp15(vcpu, c1_ACTLR) = actlr; -} - -/* - * TRM entries: A7:4.3.50, A15:4.3.49 - * R/O WI (even if NSACR.NS_L2ERR, a write of 1 is ignored). - */ -static bool access_l2ectlr(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - if (p->is_write) - return ignore_write(vcpu, p); - - *vcpu_reg(vcpu, p->Rt1) = 0; - return true; -} - -/* - * See note at ARMv7 ARM B1.14.4 (TL;DR: S/W ops are not easily virtualized). - */ -static bool access_dcsw(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - if (!p->is_write) - return read_from_write_only(vcpu, p); - - kvm_set_way_flush(vcpu); - return true; -} - -/* - * Generic accessor for VM registers. Only called as long as HCR_TVM - * is set. If the guest enables the MMU, we stop trapping the VM - * sys_regs and leave it in complete control of the caches. - * - * Used by the cpu-specific code. - */ -bool access_vm_reg(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - bool was_enabled = vcpu_has_cache_enabled(vcpu); - - BUG_ON(!p->is_write); - - vcpu_cp15(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt1); - if (p->is_64bit) - vcpu_cp15(vcpu, r->reg + 1) = *vcpu_reg(vcpu, p->Rt2); - - kvm_toggle_cache(vcpu, was_enabled); - return true; -} - -static bool access_gic_sgi(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - u64 reg; - bool g1; - - if (!p->is_write) - return read_from_write_only(vcpu, p); - - reg = (u64)*vcpu_reg(vcpu, p->Rt2) << 32; - reg |= *vcpu_reg(vcpu, p->Rt1) ; - - /* - * In a system where GICD_CTLR.DS=1, a ICC_SGI0R access generates - * Group0 SGIs only, while ICC_SGI1R can generate either group, - * depending on the SGI configuration. ICC_ASGI1R is effectively - * equivalent to ICC_SGI0R, as there is no "alternative" secure - * group. - */ - switch (p->Op1) { - default: /* Keep GCC quiet */ - case 0: /* ICC_SGI1R */ - g1 = true; - break; - case 1: /* ICC_ASGI1R */ - case 2: /* ICC_SGI0R */ - g1 = false; - break; - } - - vgic_v3_dispatch_sgi(vcpu, reg, g1); - - return true; -} - -static bool access_gic_sre(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - if (p->is_write) - return ignore_write(vcpu, p); - - *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre; - - return true; -} - -static bool access_cntp_tval(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - u32 val; - - if (p->is_write) { - val = *vcpu_reg(vcpu, p->Rt1); - kvm_arm_timer_write_sysreg(vcpu, - TIMER_PTIMER, TIMER_REG_TVAL, val); - } else { - val = kvm_arm_timer_read_sysreg(vcpu, - TIMER_PTIMER, TIMER_REG_TVAL); - *vcpu_reg(vcpu, p->Rt1) = val; - } - - return true; -} - -static bool access_cntp_ctl(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - u32 val; - - if (p->is_write) { - val = *vcpu_reg(vcpu, p->Rt1); - kvm_arm_timer_write_sysreg(vcpu, - TIMER_PTIMER, TIMER_REG_CTL, val); - } else { - val = kvm_arm_timer_read_sysreg(vcpu, - TIMER_PTIMER, TIMER_REG_CTL); - *vcpu_reg(vcpu, p->Rt1) = val; - } - - return true; -} - -static bool access_cntp_cval(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - u64 val; - - if (p->is_write) { - val = (u64)*vcpu_reg(vcpu, p->Rt2) << 32; - val |= *vcpu_reg(vcpu, p->Rt1); - kvm_arm_timer_write_sysreg(vcpu, - TIMER_PTIMER, TIMER_REG_CVAL, val); - } else { - val = kvm_arm_timer_read_sysreg(vcpu, - TIMER_PTIMER, TIMER_REG_CVAL); - *vcpu_reg(vcpu, p->Rt1) = val; - *vcpu_reg(vcpu, p->Rt2) = val >> 32; - } - - return true; -} - -/* - * We could trap ID_DFR0 and tell the guest we don't support performance - * monitoring. Unfortunately the patch to make the kernel check ID_DFR0 was - * NAKed, so it will read the PMCR anyway. - * - * Therefore we tell the guest we have 0 counters. Unfortunately, we - * must always support PMCCNTR (the cycle counter): we just RAZ/WI for - * all PM registers, which doesn't crash the guest kernel at least. - */ -static bool trap_raz_wi(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r) -{ - if (p->is_write) - return ignore_write(vcpu, p); - else - return read_zero(vcpu, p); -} - -#define access_pmcr trap_raz_wi -#define access_pmcntenset trap_raz_wi -#define access_pmcntenclr trap_raz_wi -#define access_pmovsr trap_raz_wi -#define access_pmselr trap_raz_wi -#define access_pmceid0 trap_raz_wi -#define access_pmceid1 trap_raz_wi -#define access_pmccntr trap_raz_wi -#define access_pmxevtyper trap_raz_wi -#define access_pmxevcntr trap_raz_wi -#define access_pmuserenr trap_raz_wi -#define access_pmintenset trap_raz_wi -#define access_pmintenclr trap_raz_wi - -/* Architected CP15 registers. - * CRn denotes the primary register number, but is copied to the CRm in the - * user space API for 64-bit register access in line with the terminology used - * in the ARM ARM. - * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit - * registers preceding 32-bit ones. - */ -static const struct coproc_reg cp15_regs[] = { - /* MPIDR: we use VMPIDR for guest access. */ - { CRn( 0), CRm( 0), Op1( 0), Op2( 5), is32, - NULL, reset_mpidr, c0_MPIDR }, - - /* CSSELR: swapped by interrupt.S. */ - { CRn( 0), CRm( 0), Op1( 2), Op2( 0), is32, - NULL, reset_unknown, c0_CSSELR }, - - /* ACTLR: trapped by HCR.TAC bit. */ - { CRn( 1), CRm( 0), Op1( 0), Op2( 1), is32, - access_actlr, reset_actlr, c1_ACTLR }, - - /* CPACR: swapped by interrupt.S. */ - { CRn( 1), CRm( 0), Op1( 0), Op2( 2), is32, - NULL, reset_val, c1_CPACR, 0x00000000 }, - - /* TTBR0/TTBR1/TTBCR: swapped by interrupt.S. */ - { CRm64( 2), Op1( 0), is64, access_vm_reg, reset_unknown64, c2_TTBR0 }, - { CRn(2), CRm( 0), Op1( 0), Op2( 0), is32, - access_vm_reg, reset_unknown, c2_TTBR0 }, - { CRn(2), CRm( 0), Op1( 0), Op2( 1), is32, - access_vm_reg, reset_unknown, c2_TTBR1 }, - { CRn( 2), CRm( 0), Op1( 0), Op2( 2), is32, - access_vm_reg, reset_val, c2_TTBCR, 0x00000000 }, - { CRm64( 2), Op1( 1), is64, access_vm_reg, reset_unknown64, c2_TTBR1 }, - - - /* DACR: swapped by interrupt.S. */ - { CRn( 3), CRm( 0), Op1( 0), Op2( 0), is32, - access_vm_reg, reset_unknown, c3_DACR }, - - /* DFSR/IFSR/ADFSR/AIFSR: swapped by interrupt.S. */ - { CRn( 5), CRm( 0), Op1( 0), Op2( 0), is32, - access_vm_reg, reset_unknown, c5_DFSR }, - { CRn( 5), CRm( 0), Op1( 0), Op2( 1), is32, - access_vm_reg, reset_unknown, c5_IFSR }, - { CRn( 5), CRm( 1), Op1( 0), Op2( 0), is32, - access_vm_reg, reset_unknown, c5_ADFSR }, - { CRn( 5), CRm( 1), Op1( 0), Op2( 1), is32, - access_vm_reg, reset_unknown, c5_AIFSR }, - - /* DFAR/IFAR: swapped by interrupt.S. */ - { CRn( 6), CRm( 0), Op1( 0), Op2( 0), is32, - access_vm_reg, reset_unknown, c6_DFAR }, - { CRn( 6), CRm( 0), Op1( 0), Op2( 2), is32, - access_vm_reg, reset_unknown, c6_IFAR }, - - /* PAR swapped by interrupt.S */ - { CRm64( 7), Op1( 0), is64, NULL, reset_unknown64, c7_PAR }, - - /* - * DC{C,I,CI}SW operations: - */ - { CRn( 7), CRm( 6), Op1( 0), Op2( 2), is32, access_dcsw}, - { CRn( 7), CRm(10), Op1( 0), Op2( 2), is32, access_dcsw}, - { CRn( 7), CRm(14), Op1( 0), Op2( 2), is32, access_dcsw}, - /* - * L2CTLR access (guest wants to know #CPUs). - */ - { CRn( 9), CRm( 0), Op1( 1), Op2( 2), is32, - access_l2ctlr, reset_l2ctlr, c9_L2CTLR }, - { CRn( 9), CRm( 0), Op1( 1), Op2( 3), is32, access_l2ectlr}, - - /* - * Dummy performance monitor implementation. - */ - { CRn( 9), CRm(12), Op1( 0), Op2( 0), is32, access_pmcr}, - { CRn( 9), CRm(12), Op1( 0), Op2( 1), is32, access_pmcntenset}, - { CRn( 9), CRm(12), Op1( 0), Op2( 2), is32, access_pmcntenclr}, - { CRn( 9), CRm(12), Op1( 0), Op2( 3), is32, access_pmovsr}, - { CRn( 9), CRm(12), Op1( 0), Op2( 5), is32, access_pmselr}, - { CRn( 9), CRm(12), Op1( 0), Op2( 6), is32, access_pmceid0}, - { CRn( 9), CRm(12), Op1( 0), Op2( 7), is32, access_pmceid1}, - { CRn( 9), CRm(13), Op1( 0), Op2( 0), is32, access_pmccntr}, - { CRn( 9), CRm(13), Op1( 0), Op2( 1), is32, access_pmxevtyper}, - { CRn( 9), CRm(13), Op1( 0), Op2( 2), is32, access_pmxevcntr}, - { CRn( 9), CRm(14), Op1( 0), Op2( 0), is32, access_pmuserenr}, - { CRn( 9), CRm(14), Op1( 0), Op2( 1), is32, access_pmintenset}, - { CRn( 9), CRm(14), Op1( 0), Op2( 2), is32, access_pmintenclr}, - - /* PRRR/NMRR (aka MAIR0/MAIR1): swapped by interrupt.S. */ - { CRn(10), CRm( 2), Op1( 0), Op2( 0), is32, - access_vm_reg, reset_unknown, c10_PRRR}, - { CRn(10), CRm( 2), Op1( 0), Op2( 1), is32, - access_vm_reg, reset_unknown, c10_NMRR}, - - /* AMAIR0/AMAIR1: swapped by interrupt.S. */ - { CRn(10), CRm( 3), Op1( 0), Op2( 0), is32, - access_vm_reg, reset_unknown, c10_AMAIR0}, - { CRn(10), CRm( 3), Op1( 0), Op2( 1), is32, - access_vm_reg, reset_unknown, c10_AMAIR1}, - - /* ICC_SGI1R */ - { CRm64(12), Op1( 0), is64, access_gic_sgi}, - - /* VBAR: swapped by interrupt.S. */ - { CRn(12), CRm( 0), Op1( 0), Op2( 0), is32, - NULL, reset_val, c12_VBAR, 0x00000000 }, - - /* ICC_ASGI1R */ - { CRm64(12), Op1( 1), is64, access_gic_sgi}, - /* ICC_SGI0R */ - { CRm64(12), Op1( 2), is64, access_gic_sgi}, - /* ICC_SRE */ - { CRn(12), CRm(12), Op1( 0), Op2(5), is32, access_gic_sre }, - - /* CONTEXTIDR/TPIDRURW/TPIDRURO/TPIDRPRW: swapped by interrupt.S. */ - { CRn(13), CRm( 0), Op1( 0), Op2( 1), is32, - access_vm_reg, reset_val, c13_CID, 0x00000000 }, - { CRn(13), CRm( 0), Op1( 0), Op2( 2), is32, - NULL, reset_unknown, c13_TID_URW }, - { CRn(13), CRm( 0), Op1( 0), Op2( 3), is32, - NULL, reset_unknown, c13_TID_URO }, - { CRn(13), CRm( 0), Op1( 0), Op2( 4), is32, - NULL, reset_unknown, c13_TID_PRIV }, - - /* CNTP */ - { CRm64(14), Op1( 2), is64, access_cntp_cval}, - - /* CNTKCTL: swapped by interrupt.S. */ - { CRn(14), CRm( 1), Op1( 0), Op2( 0), is32, - NULL, reset_val, c14_CNTKCTL, 0x00000000 }, - - /* CNTP */ - { CRn(14), CRm( 2), Op1( 0), Op2( 0), is32, access_cntp_tval }, - { CRn(14), CRm( 2), Op1( 0), Op2( 1), is32, access_cntp_ctl }, - - /* The Configuration Base Address Register. */ - { CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar}, -}; - -static int check_reg_table(const struct coproc_reg *table, unsigned int n) -{ - unsigned int i; - - for (i = 1; i < n; i++) { - if (cmp_reg(&table[i-1], &table[i]) >= 0) { - kvm_err("reg table %p out of order (%d)\n", table, i - 1); - return 1; - } - } - - return 0; -} - -/* Target specific emulation tables */ -static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS]; - -void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table) -{ - BUG_ON(check_reg_table(table->table, table->num)); - target_tables[table->target] = table; -} - -/* Get specific register table for this target. */ -static const struct coproc_reg *get_target_table(unsigned target, size_t *num) -{ - struct kvm_coproc_target_table *table; - - table = target_tables[target]; - *num = table->num; - return table->table; -} - -#define reg_to_match_value(x) \ - ({ \ - unsigned long val; \ - val = (x)->CRn << 11; \ - val |= (x)->CRm << 7; \ - val |= (x)->Op1 << 4; \ - val |= (x)->Op2 << 1; \ - val |= !(x)->is_64bit; \ - val; \ - }) - -static int match_reg(const void *key, const void *elt) -{ - const unsigned long pval = (unsigned long)key; - const struct coproc_reg *r = elt; - - return pval - reg_to_match_value(r); -} - -static const struct coproc_reg *find_reg(const struct coproc_params *params, - const struct coproc_reg table[], - unsigned int num) -{ - unsigned long pval = reg_to_match_value(params); - - return bsearch((void *)pval, table, num, sizeof(table[0]), match_reg); -} - -static int emulate_cp15(struct kvm_vcpu *vcpu, - const struct coproc_params *params) -{ - size_t num; - const struct coproc_reg *table, *r; - - trace_kvm_emulate_cp15_imp(params->Op1, params->Rt1, params->CRn, - params->CRm, params->Op2, params->is_write); - - table = get_target_table(vcpu->arch.target, &num); - - /* Search target-specific then generic table. */ - r = find_reg(params, table, num); - if (!r) - r = find_reg(params, cp15_regs, ARRAY_SIZE(cp15_regs)); - - if (likely(r)) { - /* If we don't have an accessor, we should never get here! */ - BUG_ON(!r->access); - - if (likely(r->access(vcpu, params, r))) { - /* Skip instruction, since it was emulated */ - kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); - } - } else { - /* If access function fails, it should complain. */ - kvm_err("Unsupported guest CP15 access at: %08lx [%08lx]\n", - *vcpu_pc(vcpu), *vcpu_cpsr(vcpu)); - print_cp_instr(params); - kvm_inject_undefined(vcpu); - } - - return 1; -} - -static struct coproc_params decode_64bit_hsr(struct kvm_vcpu *vcpu) -{ - struct coproc_params params; - - params.CRn = (kvm_vcpu_get_hsr(vcpu) >> 1) & 0xf; - params.Rt1 = (kvm_vcpu_get_hsr(vcpu) >> 5) & 0xf; - params.is_write = ((kvm_vcpu_get_hsr(vcpu) & 1) == 0); - params.is_64bit = true; - - params.Op1 = (kvm_vcpu_get_hsr(vcpu) >> 16) & 0xf; - params.Op2 = 0; - params.Rt2 = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf; - params.CRm = 0; - - return params; -} - -/** - * kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access - * @vcpu: The VCPU pointer - * @run: The kvm_run struct - */ -int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - struct coproc_params params = decode_64bit_hsr(vcpu); - - return emulate_cp15(vcpu, ¶ms); -} - -/** - * kvm_handle_cp14_64 -- handles a mrrc/mcrr trap on a guest CP14 access - * @vcpu: The VCPU pointer - * @run: The kvm_run struct - */ -int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - struct coproc_params params = decode_64bit_hsr(vcpu); - - /* raz_wi cp14 */ - trap_raz_wi(vcpu, ¶ms, NULL); - - /* handled */ - kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); - return 1; -} - -static void reset_coproc_regs(struct kvm_vcpu *vcpu, - const struct coproc_reg *table, size_t num, - unsigned long *bmap) -{ - unsigned long i; - - for (i = 0; i < num; i++) - if (table[i].reset) { - int reg = table[i].reg; - - table[i].reset(vcpu, &table[i]); - if (reg > 0 && reg < NR_CP15_REGS) { - set_bit(reg, bmap); - if (table[i].is_64bit) - set_bit(reg + 1, bmap); - } - } -} - -static struct coproc_params decode_32bit_hsr(struct kvm_vcpu *vcpu) -{ - struct coproc_params params; - - params.CRm = (kvm_vcpu_get_hsr(vcpu) >> 1) & 0xf; - params.Rt1 = (kvm_vcpu_get_hsr(vcpu) >> 5) & 0xf; - params.is_write = ((kvm_vcpu_get_hsr(vcpu) & 1) == 0); - params.is_64bit = false; - - params.CRn = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf; - params.Op1 = (kvm_vcpu_get_hsr(vcpu) >> 14) & 0x7; - params.Op2 = (kvm_vcpu_get_hsr(vcpu) >> 17) & 0x7; - params.Rt2 = 0; - - return params; -} - -/** - * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access - * @vcpu: The VCPU pointer - * @run: The kvm_run struct - */ -int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - struct coproc_params params = decode_32bit_hsr(vcpu); - return emulate_cp15(vcpu, ¶ms); -} - -/** - * kvm_handle_cp14_32 -- handles a mrc/mcr trap on a guest CP14 access - * @vcpu: The VCPU pointer - * @run: The kvm_run struct - */ -int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - struct coproc_params params = decode_32bit_hsr(vcpu); - - /* raz_wi cp14 */ - trap_raz_wi(vcpu, ¶ms, NULL); - - /* handled */ - kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); - return 1; -} - -/****************************************************************************** - * Userspace API - *****************************************************************************/ - -static bool index_to_params(u64 id, struct coproc_params *params) -{ - switch (id & KVM_REG_SIZE_MASK) { - case KVM_REG_SIZE_U32: - /* Any unused index bits means it's not valid. */ - if (id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK - | KVM_REG_ARM_COPROC_MASK - | KVM_REG_ARM_32_CRN_MASK - | KVM_REG_ARM_CRM_MASK - | KVM_REG_ARM_OPC1_MASK - | KVM_REG_ARM_32_OPC2_MASK)) - return false; - - params->is_64bit = false; - params->CRn = ((id & KVM_REG_ARM_32_CRN_MASK) - >> KVM_REG_ARM_32_CRN_SHIFT); - params->CRm = ((id & KVM_REG_ARM_CRM_MASK) - >> KVM_REG_ARM_CRM_SHIFT); - params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK) - >> KVM_REG_ARM_OPC1_SHIFT); - params->Op2 = ((id & KVM_REG_ARM_32_OPC2_MASK) - >> KVM_REG_ARM_32_OPC2_SHIFT); - return true; - case KVM_REG_SIZE_U64: - /* Any unused index bits means it's not valid. */ - if (id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK - | KVM_REG_ARM_COPROC_MASK - | KVM_REG_ARM_CRM_MASK - | KVM_REG_ARM_OPC1_MASK)) - return false; - params->is_64bit = true; - /* CRm to CRn: see cp15_to_index for details */ - params->CRn = ((id & KVM_REG_ARM_CRM_MASK) - >> KVM_REG_ARM_CRM_SHIFT); - params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK) - >> KVM_REG_ARM_OPC1_SHIFT); - params->Op2 = 0; - params->CRm = 0; - return true; - default: - return false; - } -} - -/* Decode an index value, and find the cp15 coproc_reg entry. */ -static const struct coproc_reg *index_to_coproc_reg(struct kvm_vcpu *vcpu, - u64 id) -{ - size_t num; - const struct coproc_reg *table, *r; - struct coproc_params params; - - /* We only do cp15 for now. */ - if ((id & KVM_REG_ARM_COPROC_MASK) >> KVM_REG_ARM_COPROC_SHIFT != 15) - return NULL; - - if (!index_to_params(id, ¶ms)) - return NULL; - - table = get_target_table(vcpu->arch.target, &num); - r = find_reg(¶ms, table, num); - if (!r) - r = find_reg(¶ms, cp15_regs, ARRAY_SIZE(cp15_regs)); - - /* Not saved in the cp15 array? */ - if (r && !r->reg) - r = NULL; - - return r; -} - -/* - * These are the invariant cp15 registers: we let the guest see the host - * versions of these, so they're part of the guest state. - * - * A future CPU may provide a mechanism to present different values to - * the guest, or a future kvm may trap them. - */ -/* Unfortunately, there's no register-argument for mrc, so generate. */ -#define FUNCTION_FOR32(crn, crm, op1, op2, name) \ - static void get_##name(struct kvm_vcpu *v, \ - const struct coproc_reg *r) \ - { \ - u32 val; \ - \ - asm volatile("mrc p15, " __stringify(op1) \ - ", %0, c" __stringify(crn) \ - ", c" __stringify(crm) \ - ", " __stringify(op2) "\n" : "=r" (val)); \ - ((struct coproc_reg *)r)->val = val; \ - } - -FUNCTION_FOR32(0, 0, 0, 0, MIDR) -FUNCTION_FOR32(0, 0, 0, 1, CTR) -FUNCTION_FOR32(0, 0, 0, 2, TCMTR) -FUNCTION_FOR32(0, 0, 0, 3, TLBTR) -FUNCTION_FOR32(0, 0, 0, 6, REVIDR) -FUNCTION_FOR32(0, 1, 0, 0, ID_PFR0) -FUNCTION_FOR32(0, 1, 0, 1, ID_PFR1) -FUNCTION_FOR32(0, 1, 0, 2, ID_DFR0) -FUNCTION_FOR32(0, 1, 0, 3, ID_AFR0) -FUNCTION_FOR32(0, 1, 0, 4, ID_MMFR0) -FUNCTION_FOR32(0, 1, 0, 5, ID_MMFR1) -FUNCTION_FOR32(0, 1, 0, 6, ID_MMFR2) -FUNCTION_FOR32(0, 1, 0, 7, ID_MMFR3) -FUNCTION_FOR32(0, 2, 0, 0, ID_ISAR0) -FUNCTION_FOR32(0, 2, 0, 1, ID_ISAR1) -FUNCTION_FOR32(0, 2, 0, 2, ID_ISAR2) -FUNCTION_FOR32(0, 2, 0, 3, ID_ISAR3) -FUNCTION_FOR32(0, 2, 0, 4, ID_ISAR4) -FUNCTION_FOR32(0, 2, 0, 5, ID_ISAR5) -FUNCTION_FOR32(0, 0, 1, 1, CLIDR) -FUNCTION_FOR32(0, 0, 1, 7, AIDR) - -/* ->val is filled in by kvm_invariant_coproc_table_init() */ -static struct coproc_reg invariant_cp15[] = { - { CRn( 0), CRm( 0), Op1( 0), Op2( 0), is32, NULL, get_MIDR }, - { CRn( 0), CRm( 0), Op1( 0), Op2( 1), is32, NULL, get_CTR }, - { CRn( 0), CRm( 0), Op1( 0), Op2( 2), is32, NULL, get_TCMTR }, - { CRn( 0), CRm( 0), Op1( 0), Op2( 3), is32, NULL, get_TLBTR }, - { CRn( 0), CRm( 0), Op1( 0), Op2( 6), is32, NULL, get_REVIDR }, - - { CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR }, - { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, - - { CRn( 0), CRm( 1), Op1( 0), Op2( 0), is32, NULL, get_ID_PFR0 }, - { CRn( 0), CRm( 1), Op1( 0), Op2( 1), is32, NULL, get_ID_PFR1 }, - { CRn( 0), CRm( 1), Op1( 0), Op2( 2), is32, NULL, get_ID_DFR0 }, - { CRn( 0), CRm( 1), Op1( 0), Op2( 3), is32, NULL, get_ID_AFR0 }, - { CRn( 0), CRm( 1), Op1( 0), Op2( 4), is32, NULL, get_ID_MMFR0 }, - { CRn( 0), CRm( 1), Op1( 0), Op2( 5), is32, NULL, get_ID_MMFR1 }, - { CRn( 0), CRm( 1), Op1( 0), Op2( 6), is32, NULL, get_ID_MMFR2 }, - { CRn( 0), CRm( 1), Op1( 0), Op2( 7), is32, NULL, get_ID_MMFR3 }, - - { CRn( 0), CRm( 2), Op1( 0), Op2( 0), is32, NULL, get_ID_ISAR0 }, - { CRn( 0), CRm( 2), Op1( 0), Op2( 1), is32, NULL, get_ID_ISAR1 }, - { CRn( 0), CRm( 2), Op1( 0), Op2( 2), is32, NULL, get_ID_ISAR2 }, - { CRn( 0), CRm( 2), Op1( 0), Op2( 3), is32, NULL, get_ID_ISAR3 }, - { CRn( 0), CRm( 2), Op1( 0), Op2( 4), is32, NULL, get_ID_ISAR4 }, - { CRn( 0), CRm( 2), Op1( 0), Op2( 5), is32, NULL, get_ID_ISAR5 }, -}; - -/* - * Reads a register value from a userspace address to a kernel - * variable. Make sure that register size matches sizeof(*__val). - */ -static int reg_from_user(void *val, const void __user *uaddr, u64 id) -{ - if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0) - return -EFAULT; - return 0; -} - -/* - * Writes a register value to a userspace address from a kernel variable. - * Make sure that register size matches sizeof(*__val). - */ -static int reg_to_user(void __user *uaddr, const void *val, u64 id) -{ - if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0) - return -EFAULT; - return 0; -} - -static int get_invariant_cp15(u64 id, void __user *uaddr) -{ - struct coproc_params params; - const struct coproc_reg *r; - int ret; - - if (!index_to_params(id, ¶ms)) - return -ENOENT; - - r = find_reg(¶ms, invariant_cp15, ARRAY_SIZE(invariant_cp15)); - if (!r) - return -ENOENT; - - ret = -ENOENT; - if (KVM_REG_SIZE(id) == 4) { - u32 val = r->val; - - ret = reg_to_user(uaddr, &val, id); - } else if (KVM_REG_SIZE(id) == 8) { - ret = reg_to_user(uaddr, &r->val, id); - } - return ret; -} - -static int set_invariant_cp15(u64 id, void __user *uaddr) -{ - struct coproc_params params; - const struct coproc_reg *r; - int err; - u64 val; - - if (!index_to_params(id, ¶ms)) - return -ENOENT; - r = find_reg(¶ms, invariant_cp15, ARRAY_SIZE(invariant_cp15)); - if (!r) - return -ENOENT; - - err = -ENOENT; - if (KVM_REG_SIZE(id) == 4) { - u32 val32; - - err = reg_from_user(&val32, uaddr, id); - if (!err) - val = val32; - } else if (KVM_REG_SIZE(id) == 8) { - err = reg_from_user(&val, uaddr, id); - } - if (err) - return err; - - /* This is what we mean by invariant: you can't change it. */ - if (r->val != val) - return -EINVAL; - - return 0; -} - -static bool is_valid_cache(u32 val) -{ - u32 level, ctype; - - if (val >= CSSELR_MAX) - return false; - - /* Bottom bit is Instruction or Data bit. Next 3 bits are level. */ - level = (val >> 1); - ctype = (cache_levels >> (level * 3)) & 7; - - switch (ctype) { - case 0: /* No cache */ - return false; - case 1: /* Instruction cache only */ - return (val & 1); - case 2: /* Data cache only */ - case 4: /* Unified cache */ - return !(val & 1); - case 3: /* Separate instruction and data caches */ - return true; - default: /* Reserved: we can't know instruction or data. */ - return false; - } -} - -/* Which cache CCSIDR represents depends on CSSELR value. */ -static u32 get_ccsidr(u32 csselr) -{ - u32 ccsidr; - - /* Make sure noone else changes CSSELR during this! */ - local_irq_disable(); - /* Put value into CSSELR */ - asm volatile("mcr p15, 2, %0, c0, c0, 0" : : "r" (csselr)); - isb(); - /* Read result out of CCSIDR */ - asm volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (ccsidr)); - local_irq_enable(); - - return ccsidr; -} - -static int demux_c15_get(u64 id, void __user *uaddr) -{ - u32 val; - u32 __user *uval = uaddr; - - /* Fail if we have unknown bits set. */ - if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK - | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1))) - return -ENOENT; - - switch (id & KVM_REG_ARM_DEMUX_ID_MASK) { - case KVM_REG_ARM_DEMUX_ID_CCSIDR: - if (KVM_REG_SIZE(id) != 4) - return -ENOENT; - val = (id & KVM_REG_ARM_DEMUX_VAL_MASK) - >> KVM_REG_ARM_DEMUX_VAL_SHIFT; - if (!is_valid_cache(val)) - return -ENOENT; - - return put_user(get_ccsidr(val), uval); - default: - return -ENOENT; - } -} - -static int demux_c15_set(u64 id, void __user *uaddr) -{ - u32 val, newval; - u32 __user *uval = uaddr; - - /* Fail if we have unknown bits set. */ - if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK - | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1))) - return -ENOENT; - - switch (id & KVM_REG_ARM_DEMUX_ID_MASK) { - case KVM_REG_ARM_DEMUX_ID_CCSIDR: - if (KVM_REG_SIZE(id) != 4) - return -ENOENT; - val = (id & KVM_REG_ARM_DEMUX_VAL_MASK) - >> KVM_REG_ARM_DEMUX_VAL_SHIFT; - if (!is_valid_cache(val)) - return -ENOENT; - - if (get_user(newval, uval)) - return -EFAULT; - - /* This is also invariant: you can't change it. */ - if (newval != get_ccsidr(val)) - return -EINVAL; - return 0; - default: - return -ENOENT; - } -} - -#ifdef CONFIG_VFPv3 -static const int vfp_sysregs[] = { KVM_REG_ARM_VFP_FPEXC, - KVM_REG_ARM_VFP_FPSCR, - KVM_REG_ARM_VFP_FPINST, - KVM_REG_ARM_VFP_FPINST2, - KVM_REG_ARM_VFP_MVFR0, - KVM_REG_ARM_VFP_MVFR1, - KVM_REG_ARM_VFP_FPSID }; - -static unsigned int num_fp_regs(void) -{ - if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK) >> MVFR0_A_SIMD_BIT) == 2) - return 32; - else - return 16; -} - -static unsigned int num_vfp_regs(void) -{ - /* Normal FP regs + control regs. */ - return num_fp_regs() + ARRAY_SIZE(vfp_sysregs); -} - -static int copy_vfp_regids(u64 __user *uindices) -{ - unsigned int i; - const u64 u32reg = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP; - const u64 u64reg = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP; - - for (i = 0; i < num_fp_regs(); i++) { - if (put_user((u64reg | KVM_REG_ARM_VFP_BASE_REG) + i, - uindices)) - return -EFAULT; - uindices++; - } - - for (i = 0; i < ARRAY_SIZE(vfp_sysregs); i++) { - if (put_user(u32reg | vfp_sysregs[i], uindices)) - return -EFAULT; - uindices++; - } - - return num_vfp_regs(); -} - -static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) -{ - u32 vfpid = (id & KVM_REG_ARM_VFP_MASK); - u32 val; - - /* Fail if we have unknown bits set. */ - if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK - | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1))) - return -ENOENT; - - if (vfpid < num_fp_regs()) { - if (KVM_REG_SIZE(id) != 8) - return -ENOENT; - return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpregs[vfpid], - id); - } - - /* FP control registers are all 32 bit. */ - if (KVM_REG_SIZE(id) != 4) - return -ENOENT; - - switch (vfpid) { - case KVM_REG_ARM_VFP_FPEXC: - return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpexc, id); - case KVM_REG_ARM_VFP_FPSCR: - return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpscr, id); - case KVM_REG_ARM_VFP_FPINST: - return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst, id); - case KVM_REG_ARM_VFP_FPINST2: - return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst2, id); - case KVM_REG_ARM_VFP_MVFR0: - val = fmrx(MVFR0); - return reg_to_user(uaddr, &val, id); - case KVM_REG_ARM_VFP_MVFR1: - val = fmrx(MVFR1); - return reg_to_user(uaddr, &val, id); - case KVM_REG_ARM_VFP_FPSID: - val = fmrx(FPSID); - return reg_to_user(uaddr, &val, id); - default: - return -ENOENT; - } -} - -static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) -{ - u32 vfpid = (id & KVM_REG_ARM_VFP_MASK); - u32 val; - - /* Fail if we have unknown bits set. */ - if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK - | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1))) - return -ENOENT; - - if (vfpid < num_fp_regs()) { - if (KVM_REG_SIZE(id) != 8) - return -ENOENT; - return reg_from_user(&vcpu->arch.ctxt.vfp.fpregs[vfpid], - uaddr, id); - } - - /* FP control registers are all 32 bit. */ - if (KVM_REG_SIZE(id) != 4) - return -ENOENT; - - switch (vfpid) { - case KVM_REG_ARM_VFP_FPEXC: - return reg_from_user(&vcpu->arch.ctxt.vfp.fpexc, uaddr, id); - case KVM_REG_ARM_VFP_FPSCR: - return reg_from_user(&vcpu->arch.ctxt.vfp.fpscr, uaddr, id); - case KVM_REG_ARM_VFP_FPINST: - return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst, uaddr, id); - case KVM_REG_ARM_VFP_FPINST2: - return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst2, uaddr, id); - /* These are invariant. */ - case KVM_REG_ARM_VFP_MVFR0: - if (reg_from_user(&val, uaddr, id)) - return -EFAULT; - if (val != fmrx(MVFR0)) - return -EINVAL; - return 0; - case KVM_REG_ARM_VFP_MVFR1: - if (reg_from_user(&val, uaddr, id)) - return -EFAULT; - if (val != fmrx(MVFR1)) - return -EINVAL; - return 0; - case KVM_REG_ARM_VFP_FPSID: - if (reg_from_user(&val, uaddr, id)) - return -EFAULT; - if (val != fmrx(FPSID)) - return -EINVAL; - return 0; - default: - return -ENOENT; - } -} -#else /* !CONFIG_VFPv3 */ -static unsigned int num_vfp_regs(void) -{ - return 0; -} - -static int copy_vfp_regids(u64 __user *uindices) -{ - return 0; -} - -static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) -{ - return -ENOENT; -} - -static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) -{ - return -ENOENT; -} -#endif /* !CONFIG_VFPv3 */ - -int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) -{ - const struct coproc_reg *r; - void __user *uaddr = (void __user *)(long)reg->addr; - int ret; - - if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) - return demux_c15_get(reg->id, uaddr); - - if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_VFP) - return vfp_get_reg(vcpu, reg->id, uaddr); - - r = index_to_coproc_reg(vcpu, reg->id); - if (!r) - return get_invariant_cp15(reg->id, uaddr); - - ret = -ENOENT; - if (KVM_REG_SIZE(reg->id) == 8) { - u64 val; - - val = vcpu_cp15_reg64_get(vcpu, r); - ret = reg_to_user(uaddr, &val, reg->id); - } else if (KVM_REG_SIZE(reg->id) == 4) { - ret = reg_to_user(uaddr, &vcpu_cp15(vcpu, r->reg), reg->id); - } - - return ret; -} - -int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) -{ - const struct coproc_reg *r; - void __user *uaddr = (void __user *)(long)reg->addr; - int ret; - - if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) - return demux_c15_set(reg->id, uaddr); - - if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_VFP) - return vfp_set_reg(vcpu, reg->id, uaddr); - - r = index_to_coproc_reg(vcpu, reg->id); - if (!r) - return set_invariant_cp15(reg->id, uaddr); - - ret = -ENOENT; - if (KVM_REG_SIZE(reg->id) == 8) { - u64 val; - - ret = reg_from_user(&val, uaddr, reg->id); - if (!ret) - vcpu_cp15_reg64_set(vcpu, r, val); - } else if (KVM_REG_SIZE(reg->id) == 4) { - ret = reg_from_user(&vcpu_cp15(vcpu, r->reg), uaddr, reg->id); - } - - return ret; -} - -static unsigned int num_demux_regs(void) -{ - unsigned int i, count = 0; - - for (i = 0; i < CSSELR_MAX; i++) - if (is_valid_cache(i)) - count++; - - return count; -} - -static int write_demux_regids(u64 __user *uindices) -{ - u64 val = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_DEMUX; - unsigned int i; - - val |= KVM_REG_ARM_DEMUX_ID_CCSIDR; - for (i = 0; i < CSSELR_MAX; i++) { - if (!is_valid_cache(i)) - continue; - if (put_user(val | i, uindices)) - return -EFAULT; - uindices++; - } - return 0; -} - -static u64 cp15_to_index(const struct coproc_reg *reg) -{ - u64 val = KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT); - if (reg->is_64bit) { - val |= KVM_REG_SIZE_U64; - val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); - /* - * CRn always denotes the primary coproc. reg. nr. for the - * in-kernel representation, but the user space API uses the - * CRm for the encoding, because it is modelled after the - * MRRC/MCRR instructions: see the ARM ARM rev. c page - * B3-1445 - */ - val |= (reg->CRn << KVM_REG_ARM_CRM_SHIFT); - } else { - val |= KVM_REG_SIZE_U32; - val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); - val |= (reg->Op2 << KVM_REG_ARM_32_OPC2_SHIFT); - val |= (reg->CRm << KVM_REG_ARM_CRM_SHIFT); - val |= (reg->CRn << KVM_REG_ARM_32_CRN_SHIFT); - } - return val; -} - -static bool copy_reg_to_user(const struct coproc_reg *reg, u64 __user **uind) -{ - if (!*uind) - return true; - - if (put_user(cp15_to_index(reg), *uind)) - return false; - - (*uind)++; - return true; -} - -/* Assumed ordered tables, see kvm_coproc_table_init. */ -static int walk_cp15(struct kvm_vcpu *vcpu, u64 __user *uind) -{ - const struct coproc_reg *i1, *i2, *end1, *end2; - unsigned int total = 0; - size_t num; - - /* We check for duplicates here, to allow arch-specific overrides. */ - i1 = get_target_table(vcpu->arch.target, &num); - end1 = i1 + num; - i2 = cp15_regs; - end2 = cp15_regs + ARRAY_SIZE(cp15_regs); - - BUG_ON(i1 == end1 || i2 == end2); - - /* Walk carefully, as both tables may refer to the same register. */ - while (i1 || i2) { - int cmp = cmp_reg(i1, i2); - /* target-specific overrides generic entry. */ - if (cmp <= 0) { - /* Ignore registers we trap but don't save. */ - if (i1->reg) { - if (!copy_reg_to_user(i1, &uind)) - return -EFAULT; - total++; - } - } else { - /* Ignore registers we trap but don't save. */ - if (i2->reg) { - if (!copy_reg_to_user(i2, &uind)) - return -EFAULT; - total++; - } - } - - if (cmp <= 0 && ++i1 == end1) - i1 = NULL; - if (cmp >= 0 && ++i2 == end2) - i2 = NULL; - } - return total; -} - -unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu) -{ - return ARRAY_SIZE(invariant_cp15) - + num_demux_regs() - + num_vfp_regs() - + walk_cp15(vcpu, (u64 __user *)NULL); -} - -int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) -{ - unsigned int i; - int err; - - /* Then give them all the invariant registers' indices. */ - for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++) { - if (put_user(cp15_to_index(&invariant_cp15[i]), uindices)) - return -EFAULT; - uindices++; - } - - err = walk_cp15(vcpu, uindices); - if (err < 0) - return err; - uindices += err; - - err = copy_vfp_regids(uindices); - if (err < 0) - return err; - uindices += err; - - return write_demux_regids(uindices); -} - -void kvm_coproc_table_init(void) -{ - unsigned int i; - - /* Make sure tables are unique and in order. */ - BUG_ON(check_reg_table(cp15_regs, ARRAY_SIZE(cp15_regs))); - BUG_ON(check_reg_table(invariant_cp15, ARRAY_SIZE(invariant_cp15))); - - /* We abuse the reset function to overwrite the table itself. */ - for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++) - invariant_cp15[i].reset(NULL, &invariant_cp15[i]); - - /* - * CLIDR format is awkward, so clean it up. See ARM B4.1.20: - * - * If software reads the Cache Type fields from Ctype1 - * upwards, once it has seen a value of 0b000, no caches - * exist at further-out levels of the hierarchy. So, for - * example, if Ctype3 is the first Cache Type field with a - * value of 0b000, the values of Ctype4 to Ctype7 must be - * ignored. - */ - asm volatile("mrc p15, 1, %0, c0, c0, 1" : "=r" (cache_levels)); - for (i = 0; i < 7; i++) - if (((cache_levels >> (i*3)) & 7) == 0) - break; - /* Clear all higher bits. */ - cache_levels &= (1 << (i*3))-1; -} - -/** - * kvm_reset_coprocs - sets cp15 registers to reset value - * @vcpu: The VCPU pointer - * - * This function finds the right table above and sets the registers on the - * virtual CPU struct to their architecturally defined reset values. - */ -void kvm_reset_coprocs(struct kvm_vcpu *vcpu) -{ - size_t num; - const struct coproc_reg *table; - DECLARE_BITMAP(bmap, NR_CP15_REGS) = { 0, }; - - /* Generic chip reset first (so target could override). */ - reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs), bmap); - - table = get_target_table(vcpu->arch.target, &num); - reset_coproc_regs(vcpu, table, num, bmap); - - for (num = 1; num < NR_CP15_REGS; num++) - WARN(!test_bit(num, bmap), - "Didn't reset vcpu_cp15(vcpu, %zi)", num); -} diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h deleted file mode 100644 index 637065b13012..000000000000 --- a/arch/arm/kvm/coproc.h +++ /dev/null @@ -1,130 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Authors: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#ifndef __ARM_KVM_COPROC_LOCAL_H__ -#define __ARM_KVM_COPROC_LOCAL_H__ - -struct coproc_params { - unsigned long CRn; - unsigned long CRm; - unsigned long Op1; - unsigned long Op2; - unsigned long Rt1; - unsigned long Rt2; - bool is_64bit; - bool is_write; -}; - -struct coproc_reg { - /* MRC/MCR/MRRC/MCRR instruction which accesses it. */ - unsigned long CRn; - unsigned long CRm; - unsigned long Op1; - unsigned long Op2; - - bool is_64bit; - - /* Trapped access from guest, if non-NULL. */ - bool (*access)(struct kvm_vcpu *, - const struct coproc_params *, - const struct coproc_reg *); - - /* Initialization for vcpu. */ - void (*reset)(struct kvm_vcpu *, const struct coproc_reg *); - - /* Index into vcpu_cp15(vcpu, ...), or 0 if we don't need to save it. */ - unsigned long reg; - - /* Value (usually reset value) */ - u64 val; -}; - -static inline void print_cp_instr(const struct coproc_params *p) -{ - /* Look, we even formatted it for you to paste into the table! */ - if (p->is_64bit) { - kvm_pr_unimpl(" { CRm64(%2lu), Op1(%2lu), is64, func_%s },\n", - p->CRn, p->Op1, p->is_write ? "write" : "read"); - } else { - kvm_pr_unimpl(" { CRn(%2lu), CRm(%2lu), Op1(%2lu), Op2(%2lu), is32," - " func_%s },\n", - p->CRn, p->CRm, p->Op1, p->Op2, - p->is_write ? "write" : "read"); - } -} - -static inline bool ignore_write(struct kvm_vcpu *vcpu, - const struct coproc_params *p) -{ - return true; -} - -static inline bool read_zero(struct kvm_vcpu *vcpu, - const struct coproc_params *p) -{ - *vcpu_reg(vcpu, p->Rt1) = 0; - return true; -} - -/* Reset functions */ -static inline void reset_unknown(struct kvm_vcpu *vcpu, - const struct coproc_reg *r) -{ - BUG_ON(!r->reg); - BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); - vcpu_cp15(vcpu, r->reg) = 0xdecafbad; -} - -static inline void reset_val(struct kvm_vcpu *vcpu, const struct coproc_reg *r) -{ - BUG_ON(!r->reg); - BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); - vcpu_cp15(vcpu, r->reg) = r->val; -} - -static inline void reset_unknown64(struct kvm_vcpu *vcpu, - const struct coproc_reg *r) -{ - BUG_ON(!r->reg); - BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.ctxt.cp15)); - - vcpu_cp15(vcpu, r->reg) = 0xdecafbad; - vcpu_cp15(vcpu, r->reg+1) = 0xd0c0ffee; -} - -static inline int cmp_reg(const struct coproc_reg *i1, - const struct coproc_reg *i2) -{ - BUG_ON(i1 == i2); - if (!i1) - return 1; - else if (!i2) - return -1; - if (i1->CRn != i2->CRn) - return i1->CRn - i2->CRn; - if (i1->CRm != i2->CRm) - return i1->CRm - i2->CRm; - if (i1->Op1 != i2->Op1) - return i1->Op1 - i2->Op1; - if (i1->Op2 != i2->Op2) - return i1->Op2 - i2->Op2; - return i2->is_64bit - i1->is_64bit; -} - - -#define CRn(_x) .CRn = _x -#define CRm(_x) .CRm = _x -#define CRm64(_x) .CRn = _x, .CRm = 0 -#define Op1(_x) .Op1 = _x -#define Op2(_x) .Op2 = _x -#define is64 .is_64bit = true -#define is32 .is_64bit = false - -bool access_vm_reg(struct kvm_vcpu *vcpu, - const struct coproc_params *p, - const struct coproc_reg *r); - -#endif /* __ARM_KVM_COPROC_LOCAL_H__ */ diff --git a/arch/arm/kvm/coproc_a15.c b/arch/arm/kvm/coproc_a15.c deleted file mode 100644 index 36bf15421ae8..000000000000 --- a/arch/arm/kvm/coproc_a15.c +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Authors: Rusty Russell <rusty@rustcorp.au> - * Christoffer Dall <c.dall@virtualopensystems.com> - */ -#include <linux/kvm_host.h> -#include <asm/kvm_coproc.h> -#include <asm/kvm_emulate.h> -#include <linux/init.h> - -#include "coproc.h" - -/* - * A15-specific CP15 registers. - * CRn denotes the primary register number, but is copied to the CRm in the - * user space API for 64-bit register access in line with the terminology used - * in the ARM ARM. - * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit - * registers preceding 32-bit ones. - */ -static const struct coproc_reg a15_regs[] = { - /* SCTLR: swapped by interrupt.S. */ - { CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32, - access_vm_reg, reset_val, c1_SCTLR, 0x00C50078 }, -}; - -static struct kvm_coproc_target_table a15_target_table = { - .target = KVM_ARM_TARGET_CORTEX_A15, - .table = a15_regs, - .num = ARRAY_SIZE(a15_regs), -}; - -static int __init coproc_a15_init(void) -{ - kvm_register_target_coproc_table(&a15_target_table); - return 0; -} -late_initcall(coproc_a15_init); diff --git a/arch/arm/kvm/coproc_a7.c b/arch/arm/kvm/coproc_a7.c deleted file mode 100644 index 40f643e1e05c..000000000000 --- a/arch/arm/kvm/coproc_a7.c +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Copyright (C) 2013 - ARM Ltd - * - * Authors: Rusty Russell <rusty@rustcorp.au> - * Christoffer Dall <c.dall@virtualopensystems.com> - * Jonathan Austin <jonathan.austin@arm.com> - */ -#include <linux/kvm_host.h> -#include <asm/kvm_coproc.h> -#include <asm/kvm_emulate.h> -#include <linux/init.h> - -#include "coproc.h" - -/* - * Cortex-A7 specific CP15 registers. - * CRn denotes the primary register number, but is copied to the CRm in the - * user space API for 64-bit register access in line with the terminology used - * in the ARM ARM. - * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit - * registers preceding 32-bit ones. - */ -static const struct coproc_reg a7_regs[] = { - /* SCTLR: swapped by interrupt.S. */ - { CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32, - access_vm_reg, reset_val, c1_SCTLR, 0x00C50878 }, -}; - -static struct kvm_coproc_target_table a7_target_table = { - .target = KVM_ARM_TARGET_CORTEX_A7, - .table = a7_regs, - .num = ARRAY_SIZE(a7_regs), -}; - -static int __init coproc_a7_init(void) -{ - kvm_register_target_coproc_table(&a7_target_table); - return 0; -} -late_initcall(coproc_a7_init); diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c deleted file mode 100644 index 29bb852140c5..000000000000 --- a/arch/arm/kvm/emulate.c +++ /dev/null @@ -1,166 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#include <linux/mm.h> -#include <linux/kvm_host.h> -#include <asm/kvm_arm.h> -#include <asm/kvm_emulate.h> -#include <asm/opcodes.h> -#include <trace/events/kvm.h> - -#include "trace.h" - -#define VCPU_NR_MODES 6 -#define VCPU_REG_OFFSET_USR 0 -#define VCPU_REG_OFFSET_FIQ 1 -#define VCPU_REG_OFFSET_IRQ 2 -#define VCPU_REG_OFFSET_SVC 3 -#define VCPU_REG_OFFSET_ABT 4 -#define VCPU_REG_OFFSET_UND 5 -#define REG_OFFSET(_reg) \ - (offsetof(struct kvm_regs, _reg) / sizeof(u32)) - -#define USR_REG_OFFSET(_num) REG_OFFSET(usr_regs.uregs[_num]) - -static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = { - /* USR/SYS Registers */ - [VCPU_REG_OFFSET_USR] = { - USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), - USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), - USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), - USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), - USR_REG_OFFSET(12), USR_REG_OFFSET(13), USR_REG_OFFSET(14), - }, - - /* FIQ Registers */ - [VCPU_REG_OFFSET_FIQ] = { - USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), - USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), - USR_REG_OFFSET(6), USR_REG_OFFSET(7), - REG_OFFSET(fiq_regs[0]), /* r8 */ - REG_OFFSET(fiq_regs[1]), /* r9 */ - REG_OFFSET(fiq_regs[2]), /* r10 */ - REG_OFFSET(fiq_regs[3]), /* r11 */ - REG_OFFSET(fiq_regs[4]), /* r12 */ - REG_OFFSET(fiq_regs[5]), /* r13 */ - REG_OFFSET(fiq_regs[6]), /* r14 */ - }, - - /* IRQ Registers */ - [VCPU_REG_OFFSET_IRQ] = { - USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), - USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), - USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), - USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), - USR_REG_OFFSET(12), - REG_OFFSET(irq_regs[0]), /* r13 */ - REG_OFFSET(irq_regs[1]), /* r14 */ - }, - - /* SVC Registers */ - [VCPU_REG_OFFSET_SVC] = { - USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), - USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), - USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), - USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), - USR_REG_OFFSET(12), - REG_OFFSET(svc_regs[0]), /* r13 */ - REG_OFFSET(svc_regs[1]), /* r14 */ - }, - - /* ABT Registers */ - [VCPU_REG_OFFSET_ABT] = { - USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), - USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), - USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), - USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), - USR_REG_OFFSET(12), - REG_OFFSET(abt_regs[0]), /* r13 */ - REG_OFFSET(abt_regs[1]), /* r14 */ - }, - - /* UND Registers */ - [VCPU_REG_OFFSET_UND] = { - USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), - USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), - USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), - USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), - USR_REG_OFFSET(12), - REG_OFFSET(und_regs[0]), /* r13 */ - REG_OFFSET(und_regs[1]), /* r14 */ - }, -}; - -/* - * Return a pointer to the register number valid in the current mode of - * the virtual CPU. - */ -unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) -{ - unsigned long *reg_array = (unsigned long *)&vcpu->arch.ctxt.gp_regs; - unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; - - switch (mode) { - case USR_MODE...SVC_MODE: - mode &= ~MODE32_BIT; /* 0 ... 3 */ - break; - - case ABT_MODE: - mode = VCPU_REG_OFFSET_ABT; - break; - - case UND_MODE: - mode = VCPU_REG_OFFSET_UND; - break; - - case SYSTEM_MODE: - mode = VCPU_REG_OFFSET_USR; - break; - - default: - BUG(); - } - - return reg_array + vcpu_reg_offsets[mode][reg_num]; -} - -/* - * Return the SPSR for the current mode of the virtual CPU. - */ -unsigned long *__vcpu_spsr(struct kvm_vcpu *vcpu) -{ - unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK; - switch (mode) { - case SVC_MODE: - return &vcpu->arch.ctxt.gp_regs.KVM_ARM_SVC_spsr; - case ABT_MODE: - return &vcpu->arch.ctxt.gp_regs.KVM_ARM_ABT_spsr; - case UND_MODE: - return &vcpu->arch.ctxt.gp_regs.KVM_ARM_UND_spsr; - case IRQ_MODE: - return &vcpu->arch.ctxt.gp_regs.KVM_ARM_IRQ_spsr; - case FIQ_MODE: - return &vcpu->arch.ctxt.gp_regs.KVM_ARM_FIQ_spsr; - default: - BUG(); - } -} - -/****************************************************************************** - * Inject exceptions into the guest - */ - -/** - * kvm_inject_vabt - inject an async abort / SError into the guest - * @vcpu: The VCPU to receive the exception - * - * It is assumed that this code is called from the VCPU thread and that the - * VCPU therefore is not currently executing guest code. - */ -void kvm_inject_vabt(struct kvm_vcpu *vcpu) -{ - *vcpu_hcr(vcpu) |= HCR_VA; -} diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c deleted file mode 100644 index 9f7ae0d8690f..000000000000 --- a/arch/arm/kvm/guest.c +++ /dev/null @@ -1,387 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/kvm_host.h> -#include <linux/module.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <kvm/arm_psci.h> -#include <asm/cputype.h> -#include <linux/uaccess.h> -#include <asm/kvm.h> -#include <asm/kvm_emulate.h> -#include <asm/kvm_coproc.h> - -#define VM_STAT(x) { #x, offsetof(struct kvm, stat.x), KVM_STAT_VM } -#define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU } - -struct kvm_stats_debugfs_item debugfs_entries[] = { - VCPU_STAT(halt_successful_poll), - VCPU_STAT(halt_attempted_poll), - VCPU_STAT(halt_poll_invalid), - VCPU_STAT(halt_wakeup), - VCPU_STAT(hvc_exit_stat), - VCPU_STAT(wfe_exit_stat), - VCPU_STAT(wfi_exit_stat), - VCPU_STAT(mmio_exit_user), - VCPU_STAT(mmio_exit_kernel), - VCPU_STAT(exits), - { NULL } -}; - -static u64 core_reg_offset_from_id(u64 id) -{ - return id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK | KVM_REG_ARM_CORE); -} - -static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) -{ - u32 __user *uaddr = (u32 __user *)(long)reg->addr; - struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs; - u64 off; - - if (KVM_REG_SIZE(reg->id) != 4) - return -ENOENT; - - /* Our ID is an index into the kvm_regs struct. */ - off = core_reg_offset_from_id(reg->id); - if (off >= sizeof(*regs) / KVM_REG_SIZE(reg->id)) - return -ENOENT; - - return put_user(((u32 *)regs)[off], uaddr); -} - -static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) -{ - u32 __user *uaddr = (u32 __user *)(long)reg->addr; - struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs; - u64 off, val; - - if (KVM_REG_SIZE(reg->id) != 4) - return -ENOENT; - - /* Our ID is an index into the kvm_regs struct. */ - off = core_reg_offset_from_id(reg->id); - if (off >= sizeof(*regs) / KVM_REG_SIZE(reg->id)) - return -ENOENT; - - if (get_user(val, uaddr) != 0) - return -EFAULT; - - if (off == KVM_REG_ARM_CORE_REG(usr_regs.ARM_cpsr)) { - unsigned long mode = val & MODE_MASK; - switch (mode) { - case USR_MODE: - case FIQ_MODE: - case IRQ_MODE: - case SVC_MODE: - case ABT_MODE: - case UND_MODE: - break; - default: - return -EINVAL; - } - } - - ((u32 *)regs)[off] = val; - return 0; -} - -int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) -{ - return -EINVAL; -} - -int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) -{ - return -EINVAL; -} - -#define NUM_TIMER_REGS 3 - -static bool is_timer_reg(u64 index) -{ - switch (index) { - case KVM_REG_ARM_TIMER_CTL: - case KVM_REG_ARM_TIMER_CNT: - case KVM_REG_ARM_TIMER_CVAL: - return true; - } - return false; -} - -static int copy_timer_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) -{ - if (put_user(KVM_REG_ARM_TIMER_CTL, uindices)) - return -EFAULT; - uindices++; - if (put_user(KVM_REG_ARM_TIMER_CNT, uindices)) - return -EFAULT; - uindices++; - if (put_user(KVM_REG_ARM_TIMER_CVAL, uindices)) - return -EFAULT; - - return 0; -} - -static int set_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) -{ - void __user *uaddr = (void __user *)(long)reg->addr; - u64 val; - int ret; - - ret = copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id)); - if (ret != 0) - return -EFAULT; - - return kvm_arm_timer_set_reg(vcpu, reg->id, val); -} - -static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) -{ - void __user *uaddr = (void __user *)(long)reg->addr; - u64 val; - - val = kvm_arm_timer_get_reg(vcpu, reg->id); - return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0; -} - -static unsigned long num_core_regs(void) -{ - return sizeof(struct kvm_regs) / sizeof(u32); -} - -/** - * kvm_arm_num_regs - how many registers do we present via KVM_GET_ONE_REG - * - * This is for all registers. - */ -unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu) -{ - return num_core_regs() + kvm_arm_num_coproc_regs(vcpu) - + kvm_arm_get_fw_num_regs(vcpu) - + NUM_TIMER_REGS; -} - -/** - * kvm_arm_copy_reg_indices - get indices of all registers. - * - * We do core registers right here, then we append coproc regs. - */ -int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) -{ - unsigned int i; - const u64 core_reg = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_CORE; - int ret; - - for (i = 0; i < sizeof(struct kvm_regs)/sizeof(u32); i++) { - if (put_user(core_reg | i, uindices)) - return -EFAULT; - uindices++; - } - - ret = kvm_arm_copy_fw_reg_indices(vcpu, uindices); - if (ret) - return ret; - uindices += kvm_arm_get_fw_num_regs(vcpu); - - ret = copy_timer_indices(vcpu, uindices); - if (ret) - return ret; - uindices += NUM_TIMER_REGS; - - return kvm_arm_copy_coproc_indices(vcpu, uindices); -} - -int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) -{ - /* We currently use nothing arch-specific in upper 32 bits */ - if ((reg->id & ~KVM_REG_SIZE_MASK) >> 32 != KVM_REG_ARM >> 32) - return -EINVAL; - - /* Register group 16 means we want a core register. */ - if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE) - return get_core_reg(vcpu, reg); - - if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_FW) - return kvm_arm_get_fw_reg(vcpu, reg); - - if (is_timer_reg(reg->id)) - return get_timer_reg(vcpu, reg); - - return kvm_arm_coproc_get_reg(vcpu, reg); -} - -int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) -{ - /* We currently use nothing arch-specific in upper 32 bits */ - if ((reg->id & ~KVM_REG_SIZE_MASK) >> 32 != KVM_REG_ARM >> 32) - return -EINVAL; - - /* Register group 16 means we set a core register. */ - if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE) - return set_core_reg(vcpu, reg); - - if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_FW) - return kvm_arm_set_fw_reg(vcpu, reg); - - if (is_timer_reg(reg->id)) - return set_timer_reg(vcpu, reg); - - return kvm_arm_coproc_set_reg(vcpu, reg); -} - -int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, - struct kvm_sregs *sregs) -{ - return -EINVAL; -} - -int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, - struct kvm_sregs *sregs) -{ - return -EINVAL; -} - - -int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu, - struct kvm_vcpu_events *events) -{ - events->exception.serror_pending = !!(*vcpu_hcr(vcpu) & HCR_VA); - - /* - * We never return a pending ext_dabt here because we deliver it to - * the virtual CPU directly when setting the event and it's no longer - * 'pending' at this point. - */ - - return 0; -} - -int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, - struct kvm_vcpu_events *events) -{ - bool serror_pending = events->exception.serror_pending; - bool has_esr = events->exception.serror_has_esr; - bool ext_dabt_pending = events->exception.ext_dabt_pending; - - if (serror_pending && has_esr) - return -EINVAL; - else if (serror_pending) - kvm_inject_vabt(vcpu); - - if (ext_dabt_pending) - kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu)); - - return 0; -} - -int __attribute_const__ kvm_target_cpu(void) -{ - switch (read_cpuid_part()) { - case ARM_CPU_PART_CORTEX_A7: - return KVM_ARM_TARGET_CORTEX_A7; - case ARM_CPU_PART_CORTEX_A15: - return KVM_ARM_TARGET_CORTEX_A15; - default: - return -EINVAL; - } -} - -int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init) -{ - int target = kvm_target_cpu(); - - if (target < 0) - return -ENODEV; - - memset(init, 0, sizeof(*init)); - - /* - * For now, we don't return any features. - * In future, we might use features to return target - * specific features available for the preferred - * target type. - */ - init->target = (__u32)target; - - return 0; -} - -int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) -{ - return -EINVAL; -} - -int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) -{ - return -EINVAL; -} - -int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu, - struct kvm_translation *tr) -{ - return -EINVAL; -} - -int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, - struct kvm_guest_debug *dbg) -{ - return -EINVAL; -} - -int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, - struct kvm_device_attr *attr) -{ - int ret; - - switch (attr->group) { - case KVM_ARM_VCPU_TIMER_CTRL: - ret = kvm_arm_timer_set_attr(vcpu, attr); - break; - default: - ret = -ENXIO; - break; - } - - return ret; -} - -int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, - struct kvm_device_attr *attr) -{ - int ret; - - switch (attr->group) { - case KVM_ARM_VCPU_TIMER_CTRL: - ret = kvm_arm_timer_get_attr(vcpu, attr); - break; - default: - ret = -ENXIO; - break; - } - - return ret; -} - -int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, - struct kvm_device_attr *attr) -{ - int ret; - - switch (attr->group) { - case KVM_ARM_VCPU_TIMER_CTRL: - ret = kvm_arm_timer_has_attr(vcpu, attr); - break; - default: - ret = -ENXIO; - break; - } - - return ret; -} diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c deleted file mode 100644 index e58a89d2f13f..000000000000 --- a/arch/arm/kvm/handle_exit.c +++ /dev/null @@ -1,175 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#include <linux/kvm.h> -#include <linux/kvm_host.h> -#include <asm/kvm_emulate.h> -#include <asm/kvm_coproc.h> -#include <asm/kvm_mmu.h> -#include <kvm/arm_hypercalls.h> -#include <trace/events/kvm.h> - -#include "trace.h" - -typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *); - -static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - int ret; - - trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0), - kvm_vcpu_hvc_get_imm(vcpu)); - vcpu->stat.hvc_exit_stat++; - - ret = kvm_hvc_call_handler(vcpu); - if (ret < 0) { - vcpu_set_reg(vcpu, 0, ~0UL); - return 1; - } - - return ret; -} - -static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* - * "If an SMC instruction executed at Non-secure EL1 is - * trapped to EL2 because HCR_EL2.TSC is 1, the exception is a - * Trap exception, not a Secure Monitor Call exception [...]" - * - * We need to advance the PC after the trap, as it would - * otherwise return to the same address... - */ - vcpu_set_reg(vcpu, 0, ~0UL); - kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); - return 1; -} - -/** - * kvm_handle_wfx - handle a WFI or WFE instructions trapped in guests - * @vcpu: the vcpu pointer - * @run: the kvm_run structure pointer - * - * WFE: Yield the CPU and come back to this vcpu when the scheduler - * decides to. - * WFI: Simply call kvm_vcpu_block(), which will halt execution of - * world-switches and schedule other host processes until there is an - * incoming IRQ or FIQ to the VM. - */ -static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - if (kvm_vcpu_get_hsr(vcpu) & HSR_WFI_IS_WFE) { - trace_kvm_wfx(*vcpu_pc(vcpu), true); - vcpu->stat.wfe_exit_stat++; - kvm_vcpu_on_spin(vcpu, vcpu_mode_priv(vcpu)); - } else { - trace_kvm_wfx(*vcpu_pc(vcpu), false); - vcpu->stat.wfi_exit_stat++; - kvm_vcpu_block(vcpu); - kvm_clear_request(KVM_REQ_UNHALT, vcpu); - } - - kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); - - return 1; -} - -static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - u32 hsr = kvm_vcpu_get_hsr(vcpu); - - kvm_pr_unimpl("Unknown exception class: hsr: %#08x\n", - hsr); - - kvm_inject_undefined(vcpu); - return 1; -} - -static exit_handle_fn arm_exit_handlers[] = { - [0 ... HSR_EC_MAX] = kvm_handle_unknown_ec, - [HSR_EC_WFI] = kvm_handle_wfx, - [HSR_EC_CP15_32] = kvm_handle_cp15_32, - [HSR_EC_CP15_64] = kvm_handle_cp15_64, - [HSR_EC_CP14_MR] = kvm_handle_cp14_32, - [HSR_EC_CP14_LS] = kvm_handle_cp14_load_store, - [HSR_EC_CP14_64] = kvm_handle_cp14_64, - [HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access, - [HSR_EC_CP10_ID] = kvm_handle_cp10_id, - [HSR_EC_HVC] = handle_hvc, - [HSR_EC_SMC] = handle_smc, - [HSR_EC_IABT] = kvm_handle_guest_abort, - [HSR_EC_DABT] = kvm_handle_guest_abort, -}; - -static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu) -{ - u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu); - - return arm_exit_handlers[hsr_ec]; -} - -/* - * Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on - * proper exit to userspace. - */ -int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, - int exception_index) -{ - exit_handle_fn exit_handler; - - if (ARM_ABORT_PENDING(exception_index)) { - u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu); - - /* - * HVC/SMC already have an adjusted PC, which we need - * to correct in order to return to after having - * injected the abort. - */ - if (hsr_ec == HSR_EC_HVC || hsr_ec == HSR_EC_SMC) { - u32 adj = kvm_vcpu_trap_il_is32bit(vcpu) ? 4 : 2; - *vcpu_pc(vcpu) -= adj; - } - - kvm_inject_vabt(vcpu); - return 1; - } - - exception_index = ARM_EXCEPTION_CODE(exception_index); - - switch (exception_index) { - case ARM_EXCEPTION_IRQ: - return 1; - case ARM_EXCEPTION_HVC: - /* - * See ARM ARM B1.14.1: "Hyp traps on instructions - * that fail their condition code check" - */ - if (!kvm_condition_valid(vcpu)) { - kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); - return 1; - } - - exit_handler = kvm_get_exit_handler(vcpu); - - return exit_handler(vcpu, run); - case ARM_EXCEPTION_DATA_ABORT: - kvm_inject_vabt(vcpu); - return 1; - case ARM_EXCEPTION_HYP_GONE: - /* - * HYP has been reset to the hyp-stub. This happens - * when a guest is pre-empted by kvm_reboot()'s - * shutdown call. - */ - run->exit_reason = KVM_EXIT_FAIL_ENTRY; - return 0; - default: - kvm_pr_unimpl("Unsupported exception type: %d", - exception_index); - run->exit_reason = KVM_EXIT_INTERNAL_ERROR; - return 0; - } -} diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile deleted file mode 100644 index ba88b1eca93c..000000000000 --- a/arch/arm/kvm/hyp/Makefile +++ /dev/null @@ -1,34 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for Kernel-based Virtual Machine module, HYP part -# - -ccflags-y += -fno-stack-protector -DDISABLE_BRANCH_PROFILING - -KVM=../../../../virt/kvm - -CFLAGS_ARMV7VE :=$(call cc-option, -march=armv7ve) - -obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o -obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o -obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/aarch32.o - -obj-$(CONFIG_KVM_ARM_HOST) += tlb.o -obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o -obj-$(CONFIG_KVM_ARM_HOST) += vfp.o -obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o -CFLAGS_banked-sr.o += $(CFLAGS_ARMV7VE) - -obj-$(CONFIG_KVM_ARM_HOST) += entry.o -obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o -obj-$(CONFIG_KVM_ARM_HOST) += switch.o -CFLAGS_switch.o += $(CFLAGS_ARMV7VE) -obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o - -# KVM code is run at a different exception code with a different map, so -# compiler instrumentation that inserts callbacks or checks into the code may -# cause crashes. Just disable it. -GCOV_PROFILE := n -KASAN_SANITIZE := n -UBSAN_SANITIZE := n -KCOV_INSTRUMENT := n diff --git a/arch/arm/kvm/hyp/banked-sr.c b/arch/arm/kvm/hyp/banked-sr.c deleted file mode 100644 index c4632ed9e819..000000000000 --- a/arch/arm/kvm/hyp/banked-sr.c +++ /dev/null @@ -1,70 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Original code: - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> - */ - -#include <asm/kvm_hyp.h> - -/* - * gcc before 4.9 doesn't understand -march=armv7ve, so we have to - * trick the assembler. - */ -__asm__(".arch_extension virt"); - -void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt) -{ - ctxt->gp_regs.usr_regs.ARM_sp = read_special(SP_usr); - ctxt->gp_regs.usr_regs.ARM_pc = read_special(ELR_hyp); - ctxt->gp_regs.usr_regs.ARM_cpsr = read_special(SPSR); - ctxt->gp_regs.KVM_ARM_SVC_sp = read_special(SP_svc); - ctxt->gp_regs.KVM_ARM_SVC_lr = read_special(LR_svc); - ctxt->gp_regs.KVM_ARM_SVC_spsr = read_special(SPSR_svc); - ctxt->gp_regs.KVM_ARM_ABT_sp = read_special(SP_abt); - ctxt->gp_regs.KVM_ARM_ABT_lr = read_special(LR_abt); - ctxt->gp_regs.KVM_ARM_ABT_spsr = read_special(SPSR_abt); - ctxt->gp_regs.KVM_ARM_UND_sp = read_special(SP_und); - ctxt->gp_regs.KVM_ARM_UND_lr = read_special(LR_und); - ctxt->gp_regs.KVM_ARM_UND_spsr = read_special(SPSR_und); - ctxt->gp_regs.KVM_ARM_IRQ_sp = read_special(SP_irq); - ctxt->gp_regs.KVM_ARM_IRQ_lr = read_special(LR_irq); - ctxt->gp_regs.KVM_ARM_IRQ_spsr = read_special(SPSR_irq); - ctxt->gp_regs.KVM_ARM_FIQ_r8 = read_special(R8_fiq); - ctxt->gp_regs.KVM_ARM_FIQ_r9 = read_special(R9_fiq); - ctxt->gp_regs.KVM_ARM_FIQ_r10 = read_special(R10_fiq); - ctxt->gp_regs.KVM_ARM_FIQ_fp = read_special(R11_fiq); - ctxt->gp_regs.KVM_ARM_FIQ_ip = read_special(R12_fiq); - ctxt->gp_regs.KVM_ARM_FIQ_sp = read_special(SP_fiq); - ctxt->gp_regs.KVM_ARM_FIQ_lr = read_special(LR_fiq); - ctxt->gp_regs.KVM_ARM_FIQ_spsr = read_special(SPSR_fiq); -} - -void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt) -{ - write_special(ctxt->gp_regs.usr_regs.ARM_sp, SP_usr); - write_special(ctxt->gp_regs.usr_regs.ARM_pc, ELR_hyp); - write_special(ctxt->gp_regs.usr_regs.ARM_cpsr, SPSR_cxsf); - write_special(ctxt->gp_regs.KVM_ARM_SVC_sp, SP_svc); - write_special(ctxt->gp_regs.KVM_ARM_SVC_lr, LR_svc); - write_special(ctxt->gp_regs.KVM_ARM_SVC_spsr, SPSR_svc); - write_special(ctxt->gp_regs.KVM_ARM_ABT_sp, SP_abt); - write_special(ctxt->gp_regs.KVM_ARM_ABT_lr, LR_abt); - write_special(ctxt->gp_regs.KVM_ARM_ABT_spsr, SPSR_abt); - write_special(ctxt->gp_regs.KVM_ARM_UND_sp, SP_und); - write_special(ctxt->gp_regs.KVM_ARM_UND_lr, LR_und); - write_special(ctxt->gp_regs.KVM_ARM_UND_spsr, SPSR_und); - write_special(ctxt->gp_regs.KVM_ARM_IRQ_sp, SP_irq); - write_special(ctxt->gp_regs.KVM_ARM_IRQ_lr, LR_irq); - write_special(ctxt->gp_regs.KVM_ARM_IRQ_spsr, SPSR_irq); - write_special(ctxt->gp_regs.KVM_ARM_FIQ_r8, R8_fiq); - write_special(ctxt->gp_regs.KVM_ARM_FIQ_r9, R9_fiq); - write_special(ctxt->gp_regs.KVM_ARM_FIQ_r10, R10_fiq); - write_special(ctxt->gp_regs.KVM_ARM_FIQ_fp, R11_fiq); - write_special(ctxt->gp_regs.KVM_ARM_FIQ_ip, R12_fiq); - write_special(ctxt->gp_regs.KVM_ARM_FIQ_sp, SP_fiq); - write_special(ctxt->gp_regs.KVM_ARM_FIQ_lr, LR_fiq); - write_special(ctxt->gp_regs.KVM_ARM_FIQ_spsr, SPSR_fiq); -} diff --git a/arch/arm/kvm/hyp/cp15-sr.c b/arch/arm/kvm/hyp/cp15-sr.c deleted file mode 100644 index e6923306f698..000000000000 --- a/arch/arm/kvm/hyp/cp15-sr.c +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Original code: - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> - */ - -#include <asm/kvm_hyp.h> - -static u64 *cp15_64(struct kvm_cpu_context *ctxt, int idx) -{ - return (u64 *)(ctxt->cp15 + idx); -} - -void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt) -{ - ctxt->cp15[c0_CSSELR] = read_sysreg(CSSELR); - ctxt->cp15[c1_SCTLR] = read_sysreg(SCTLR); - ctxt->cp15[c1_CPACR] = read_sysreg(CPACR); - *cp15_64(ctxt, c2_TTBR0) = read_sysreg(TTBR0); - *cp15_64(ctxt, c2_TTBR1) = read_sysreg(TTBR1); - ctxt->cp15[c2_TTBCR] = read_sysreg(TTBCR); - ctxt->cp15[c3_DACR] = read_sysreg(DACR); - ctxt->cp15[c5_DFSR] = read_sysreg(DFSR); - ctxt->cp15[c5_IFSR] = read_sysreg(IFSR); - ctxt->cp15[c5_ADFSR] = read_sysreg(ADFSR); - ctxt->cp15[c5_AIFSR] = read_sysreg(AIFSR); - ctxt->cp15[c6_DFAR] = read_sysreg(DFAR); - ctxt->cp15[c6_IFAR] = read_sysreg(IFAR); - *cp15_64(ctxt, c7_PAR) = read_sysreg(PAR); - ctxt->cp15[c10_PRRR] = read_sysreg(PRRR); - ctxt->cp15[c10_NMRR] = read_sysreg(NMRR); - ctxt->cp15[c10_AMAIR0] = read_sysreg(AMAIR0); - ctxt->cp15[c10_AMAIR1] = read_sysreg(AMAIR1); - ctxt->cp15[c12_VBAR] = read_sysreg(VBAR); - ctxt->cp15[c13_CID] = read_sysreg(CID); - ctxt->cp15[c13_TID_URW] = read_sysreg(TID_URW); - ctxt->cp15[c13_TID_URO] = read_sysreg(TID_URO); - ctxt->cp15[c13_TID_PRIV] = read_sysreg(TID_PRIV); - ctxt->cp15[c14_CNTKCTL] = read_sysreg(CNTKCTL); -} - -void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt) -{ - write_sysreg(ctxt->cp15[c0_MPIDR], VMPIDR); - write_sysreg(ctxt->cp15[c0_CSSELR], CSSELR); - write_sysreg(ctxt->cp15[c1_SCTLR], SCTLR); - write_sysreg(ctxt->cp15[c1_CPACR], CPACR); - write_sysreg(*cp15_64(ctxt, c2_TTBR0), TTBR0); - write_sysreg(*cp15_64(ctxt, c2_TTBR1), TTBR1); - write_sysreg(ctxt->cp15[c2_TTBCR], TTBCR); - write_sysreg(ctxt->cp15[c3_DACR], DACR); - write_sysreg(ctxt->cp15[c5_DFSR], DFSR); - write_sysreg(ctxt->cp15[c5_IFSR], IFSR); - write_sysreg(ctxt->cp15[c5_ADFSR], ADFSR); - write_sysreg(ctxt->cp15[c5_AIFSR], AIFSR); - write_sysreg(ctxt->cp15[c6_DFAR], DFAR); - write_sysreg(ctxt->cp15[c6_IFAR], IFAR); - write_sysreg(*cp15_64(ctxt, c7_PAR), PAR); - write_sysreg(ctxt->cp15[c10_PRRR], PRRR); - write_sysreg(ctxt->cp15[c10_NMRR], NMRR); - write_sysreg(ctxt->cp15[c10_AMAIR0], AMAIR0); - write_sysreg(ctxt->cp15[c10_AMAIR1], AMAIR1); - write_sysreg(ctxt->cp15[c12_VBAR], VBAR); - write_sysreg(ctxt->cp15[c13_CID], CID); - write_sysreg(ctxt->cp15[c13_TID_URW], TID_URW); - write_sysreg(ctxt->cp15[c13_TID_URO], TID_URO); - write_sysreg(ctxt->cp15[c13_TID_PRIV], TID_PRIV); - write_sysreg(ctxt->cp15[c14_CNTKCTL], CNTKCTL); -} diff --git a/arch/arm/kvm/hyp/entry.S b/arch/arm/kvm/hyp/entry.S deleted file mode 100644 index 4bd1f6a74180..000000000000 --- a/arch/arm/kvm/hyp/entry.S +++ /dev/null @@ -1,121 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2016 - ARM Ltd - * Author: Marc Zyngier <marc.zyngier@arm.com> -*/ - -#include <linux/linkage.h> -#include <asm/asm-offsets.h> -#include <asm/kvm_arm.h> -#include <asm/kvm_asm.h> - - .arch_extension virt - - .text - .pushsection .hyp.text, "ax" - -#define USR_REGS_OFFSET (CPU_CTXT_GP_REGS + GP_REGS_USR) - -/* int __guest_enter(struct kvm_vcpu *vcpu, struct kvm_cpu_context *host) */ -ENTRY(__guest_enter) - @ Save host registers - add r1, r1, #(USR_REGS_OFFSET + S_R4) - stm r1!, {r4-r12} - str lr, [r1, #4] @ Skip SP_usr (already saved) - - @ Restore guest registers - add r0, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0) - ldr lr, [r0, #S_LR] - ldm r0, {r0-r12} - - clrex - eret -ENDPROC(__guest_enter) - -ENTRY(__guest_exit) - /* - * return convention: - * guest r0, r1, r2 saved on the stack - * r0: vcpu pointer - * r1: exception code - */ - - add r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R3) - stm r2!, {r3-r12} - str lr, [r2, #4] - add r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0) - pop {r3, r4, r5} @ r0, r1, r2 - stm r2, {r3-r5} - - ldr r0, [r0, #VCPU_HOST_CTXT] - add r0, r0, #(USR_REGS_OFFSET + S_R4) - ldm r0!, {r4-r12} - ldr lr, [r0, #4] - - mov r0, r1 - mrs r1, SPSR - mrs r2, ELR_hyp - mrc p15, 4, r3, c5, c2, 0 @ HSR - - /* - * Force loads and stores to complete before unmasking aborts - * and forcing the delivery of the exception. This gives us a - * single instruction window, which the handler will try to - * match. - */ - dsb sy - cpsie a - - .global abort_guest_exit_start -abort_guest_exit_start: - - isb - - .global abort_guest_exit_end -abort_guest_exit_end: - - /* - * If we took an abort, r0[31] will be set, and cmp will set - * the N bit in PSTATE. - */ - cmp r0, #0 - msrmi SPSR_cxsf, r1 - msrmi ELR_hyp, r2 - mcrmi p15, 4, r3, c5, c2, 0 @ HSR - - bx lr -ENDPROC(__guest_exit) - -/* - * If VFPv3 support is not available, then we will not switch the VFP - * registers; however cp10 and cp11 accesses will still trap and fallback - * to the regular coprocessor emulation code, which currently will - * inject an undefined exception to the guest. - */ -#ifdef CONFIG_VFPv3 -ENTRY(__vfp_guest_restore) - push {r3, r4, lr} - - @ NEON/VFP used. Turn on VFP access. - mrc p15, 4, r1, c1, c1, 2 @ HCPTR - bic r1, r1, #(HCPTR_TCP(10) | HCPTR_TCP(11)) - mcr p15, 4, r1, c1, c1, 2 @ HCPTR - isb - - @ Switch VFP/NEON hardware state to the guest's - mov r4, r0 - ldr r0, [r0, #VCPU_HOST_CTXT] - add r0, r0, #CPU_CTXT_VFP - bl __vfp_save_state - add r0, r4, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP) - bl __vfp_restore_state - - pop {r3, r4, lr} - pop {r0, r1, r2} - clrex - eret -ENDPROC(__vfp_guest_restore) -#endif - - .popsection - diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S deleted file mode 100644 index fe3d7811a908..000000000000 --- a/arch/arm/kvm/hyp/hyp-entry.S +++ /dev/null @@ -1,295 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#include <linux/arm-smccc.h> -#include <linux/linkage.h> -#include <asm/kvm_arm.h> -#include <asm/kvm_asm.h> - - .arch_extension virt - - .text - .pushsection .hyp.text, "ax" - -.macro load_vcpu reg - mrc p15, 4, \reg, c13, c0, 2 @ HTPIDR -.endm - -/******************************************************************** - * Hypervisor exception vector and handlers - * - * - * The KVM/ARM Hypervisor ABI is defined as follows: - * - * Entry to Hyp mode from the host kernel will happen _only_ when an HVC - * instruction is issued since all traps are disabled when running the host - * kernel as per the Hyp-mode initialization at boot time. - * - * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc - * below) when the HVC instruction is called from SVC mode (i.e. a guest or the - * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC - * instructions are called from within Hyp-mode. - * - * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): - * Switching to Hyp mode is done through a simple HVC #0 instruction. The - * exception vector code will check that the HVC comes from VMID==0. - * - r0 contains a pointer to a HYP function - * - r1, r2, and r3 contain arguments to the above function. - * - The HYP function will be called with its arguments in r0, r1 and r2. - * On HYP function return, we return directly to SVC. - * - * Note that the above is used to execute code in Hyp-mode from a host-kernel - * point of view, and is a different concept from performing a world-switch and - * executing guest code SVC mode (with a VMID != 0). - */ - - .align 5 -__kvm_hyp_vector: - .global __kvm_hyp_vector - - @ Hyp-mode exception vector - W(b) hyp_reset - W(b) hyp_undef - W(b) hyp_svc - W(b) hyp_pabt - W(b) hyp_dabt - W(b) hyp_hvc - W(b) hyp_irq - W(b) hyp_fiq - -#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR - .align 5 -__kvm_hyp_vector_ic_inv: - .global __kvm_hyp_vector_ic_inv - - /* - * We encode the exception entry in the bottom 3 bits of - * SP, and we have to guarantee to be 8 bytes aligned. - */ - W(add) sp, sp, #1 /* Reset 7 */ - W(add) sp, sp, #1 /* Undef 6 */ - W(add) sp, sp, #1 /* Syscall 5 */ - W(add) sp, sp, #1 /* Prefetch abort 4 */ - W(add) sp, sp, #1 /* Data abort 3 */ - W(add) sp, sp, #1 /* HVC 2 */ - W(add) sp, sp, #1 /* IRQ 1 */ - W(nop) /* FIQ 0 */ - - mcr p15, 0, r0, c7, c5, 0 /* ICIALLU */ - isb - - b decode_vectors - - .align 5 -__kvm_hyp_vector_bp_inv: - .global __kvm_hyp_vector_bp_inv - - /* - * We encode the exception entry in the bottom 3 bits of - * SP, and we have to guarantee to be 8 bytes aligned. - */ - W(add) sp, sp, #1 /* Reset 7 */ - W(add) sp, sp, #1 /* Undef 6 */ - W(add) sp, sp, #1 /* Syscall 5 */ - W(add) sp, sp, #1 /* Prefetch abort 4 */ - W(add) sp, sp, #1 /* Data abort 3 */ - W(add) sp, sp, #1 /* HVC 2 */ - W(add) sp, sp, #1 /* IRQ 1 */ - W(nop) /* FIQ 0 */ - - mcr p15, 0, r0, c7, c5, 6 /* BPIALL */ - isb - -decode_vectors: - -#ifdef CONFIG_THUMB2_KERNEL - /* - * Yet another silly hack: Use VPIDR as a temp register. - * Thumb2 is really a pain, as SP cannot be used with most - * of the bitwise instructions. The vect_br macro ensures - * things gets cleaned-up. - */ - mcr p15, 4, r0, c0, c0, 0 /* VPIDR */ - mov r0, sp - and r0, r0, #7 - sub sp, sp, r0 - push {r1, r2} - mov r1, r0 - mrc p15, 4, r0, c0, c0, 0 /* VPIDR */ - mrc p15, 0, r2, c0, c0, 0 /* MIDR */ - mcr p15, 4, r2, c0, c0, 0 /* VPIDR */ -#endif - -.macro vect_br val, targ -ARM( eor sp, sp, #\val ) -ARM( tst sp, #7 ) -ARM( eorne sp, sp, #\val ) - -THUMB( cmp r1, #\val ) -THUMB( popeq {r1, r2} ) - - beq \targ -.endm - - vect_br 0, hyp_fiq - vect_br 1, hyp_irq - vect_br 2, hyp_hvc - vect_br 3, hyp_dabt - vect_br 4, hyp_pabt - vect_br 5, hyp_svc - vect_br 6, hyp_undef - vect_br 7, hyp_reset -#endif - -.macro invalid_vector label, cause - .align -\label: mov r0, #\cause - b __hyp_panic -.endm - - invalid_vector hyp_reset ARM_EXCEPTION_RESET - invalid_vector hyp_undef ARM_EXCEPTION_UNDEFINED - invalid_vector hyp_svc ARM_EXCEPTION_SOFTWARE - invalid_vector hyp_pabt ARM_EXCEPTION_PREF_ABORT - invalid_vector hyp_fiq ARM_EXCEPTION_FIQ - -ENTRY(__hyp_do_panic) - mrs lr, cpsr - bic lr, lr, #MODE_MASK - orr lr, lr, #SVC_MODE -THUMB( orr lr, lr, #PSR_T_BIT ) - msr spsr_cxsf, lr - ldr lr, =panic - msr ELR_hyp, lr - ldr lr, =__kvm_call_hyp - clrex - eret -ENDPROC(__hyp_do_panic) - -hyp_hvc: - /* - * Getting here is either because of a trap from a guest, - * or from executing HVC from the host kernel, which means - * "do something in Hyp mode". - */ - push {r0, r1, r2} - - @ Check syndrome register - mrc p15, 4, r1, c5, c2, 0 @ HSR - lsr r0, r1, #HSR_EC_SHIFT - cmp r0, #HSR_EC_HVC - bne guest_trap @ Not HVC instr. - - /* - * Let's check if the HVC came from VMID 0 and allow simple - * switch to Hyp mode - */ - mrrc p15, 6, r0, r2, c2 - lsr r2, r2, #16 - and r2, r2, #0xff - cmp r2, #0 - bne guest_hvc_trap @ Guest called HVC - - /* - * Getting here means host called HVC, we shift parameters and branch - * to Hyp function. - */ - pop {r0, r1, r2} - - /* - * Check if we have a kernel function, which is guaranteed to be - * bigger than the maximum hyp stub hypercall - */ - cmp r0, #HVC_STUB_HCALL_NR - bhs 1f - - /* - * Not a kernel function, treat it as a stub hypercall. - * Compute the physical address for __kvm_handle_stub_hvc - * (as the code lives in the idmaped page) and branch there. - * We hijack ip (r12) as a tmp register. - */ - push {r1} - ldr r1, =kimage_voffset - ldr r1, [r1] - ldr ip, =__kvm_handle_stub_hvc - sub ip, ip, r1 - pop {r1} - - bx ip - -1: - /* - * Pushing r2 here is just a way of keeping the stack aligned to - * 8 bytes on any path that can trigger a HYP exception. Here, - * we may well be about to jump into the guest, and the guest - * exit would otherwise be badly decoded by our fancy - * "decode-exception-without-a-branch" code... - */ - push {r2, lr} - - mov lr, r0 - mov r0, r1 - mov r1, r2 - mov r2, r3 - -THUMB( orr lr, #1) - blx lr @ Call the HYP function - - pop {r2, lr} - eret - -guest_hvc_trap: - movw r2, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1 - movt r2, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1 - ldr r0, [sp] @ Guest's r0 - teq r0, r2 - bne guest_trap - add sp, sp, #12 - @ Returns: - @ r0 = 0 - @ r1 = HSR value (perfectly predictable) - @ r2 = ARM_SMCCC_ARCH_WORKAROUND_1 - mov r0, #0 - eret - -guest_trap: - load_vcpu r0 @ Load VCPU pointer to r0 - -#ifdef CONFIG_VFPv3 - @ Check for a VFP access - lsr r1, r1, #HSR_EC_SHIFT - cmp r1, #HSR_EC_CP_0_13 - beq __vfp_guest_restore -#endif - - mov r1, #ARM_EXCEPTION_HVC - b __guest_exit - -hyp_irq: - push {r0, r1, r2} - mov r1, #ARM_EXCEPTION_IRQ - load_vcpu r0 @ Load VCPU pointer to r0 - b __guest_exit - -hyp_dabt: - push {r0, r1} - mrs r0, ELR_hyp - ldr r1, =abort_guest_exit_start -THUMB( add r1, r1, #1) - cmp r0, r1 - ldrne r1, =abort_guest_exit_end -THUMB( addne r1, r1, #1) - cmpne r0, r1 - pop {r0, r1} - bne __hyp_panic - - orr r0, r0, #(1 << ARM_EXIT_WITH_ABORT_BIT) - eret - - .ltorg - - .popsection diff --git a/arch/arm/kvm/hyp/s2-setup.c b/arch/arm/kvm/hyp/s2-setup.c deleted file mode 100644 index 5dfbea5adf65..000000000000 --- a/arch/arm/kvm/hyp/s2-setup.c +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2016 - ARM Ltd - * Author: Marc Zyngier <marc.zyngier@arm.com> - */ - -#include <linux/types.h> -#include <asm/kvm_arm.h> -#include <asm/kvm_asm.h> -#include <asm/kvm_hyp.h> - -void __hyp_text __init_stage2_translation(void) -{ - u64 val; - - val = read_sysreg(VTCR) & ~VTCR_MASK; - - val |= read_sysreg(HTCR) & VTCR_HTCR_SH; - val |= KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S; - - write_sysreg(val, VTCR); -} diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c deleted file mode 100644 index 1efeef3fd0ee..000000000000 --- a/arch/arm/kvm/hyp/switch.c +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2015 - ARM Ltd - * Author: Marc Zyngier <marc.zyngier@arm.com> - */ -#include <linux/jump_label.h> - -#include <asm/kvm_asm.h> -#include <asm/kvm_hyp.h> -#include <asm/kvm_mmu.h> - -__asm__(".arch_extension virt"); - -/* - * Activate the traps, saving the host's fpexc register before - * overwriting it. We'll restore it on VM exit. - */ -static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu, u32 *fpexc_host) -{ - u32 val; - - /* - * We are about to set HCPTR.TCP10/11 to trap all floating point - * register accesses to HYP, however, the ARM ARM clearly states that - * traps are only taken to HYP if the operation would not otherwise - * trap to SVC. Therefore, always make sure that for 32-bit guests, - * we set FPEXC.EN to prevent traps to SVC, when setting the TCP bits. - */ - val = read_sysreg(VFP_FPEXC); - *fpexc_host = val; - if (!(val & FPEXC_EN)) { - write_sysreg(val | FPEXC_EN, VFP_FPEXC); - isb(); - } - - write_sysreg(vcpu->arch.hcr, HCR); - /* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */ - write_sysreg(HSTR_T(15), HSTR); - write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR); - val = read_sysreg(HDCR); - val |= HDCR_TPM | HDCR_TPMCR; /* trap performance monitors */ - val |= HDCR_TDRA | HDCR_TDOSA | HDCR_TDA; /* trap debug regs */ - write_sysreg(val, HDCR); -} - -static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) -{ - u32 val; - - /* - * If we pended a virtual abort, preserve it until it gets - * cleared. See B1.9.9 (Virtual Abort exception) for details, - * but the crucial bit is the zeroing of HCR.VA in the - * pseudocode. - */ - if (vcpu->arch.hcr & HCR_VA) - vcpu->arch.hcr = read_sysreg(HCR); - - write_sysreg(0, HCR); - write_sysreg(0, HSTR); - val = read_sysreg(HDCR); - write_sysreg(val & ~(HDCR_TPM | HDCR_TPMCR), HDCR); - write_sysreg(0, HCPTR); -} - -static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu) -{ - struct kvm *kvm = kern_hyp_va(vcpu->kvm); - write_sysreg(kvm_get_vttbr(kvm), VTTBR); - write_sysreg(vcpu->arch.midr, VPIDR); -} - -static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu) -{ - write_sysreg(0, VTTBR); - write_sysreg(read_sysreg(MIDR), VPIDR); -} - - -static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu) -{ - if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif)) { - __vgic_v3_save_state(vcpu); - __vgic_v3_deactivate_traps(vcpu); - } -} - -static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu) -{ - if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif)) { - __vgic_v3_activate_traps(vcpu); - __vgic_v3_restore_state(vcpu); - } -} - -static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) -{ - u32 hsr = read_sysreg(HSR); - u8 ec = hsr >> HSR_EC_SHIFT; - u32 hpfar, far; - - vcpu->arch.fault.hsr = hsr; - - if (ec == HSR_EC_IABT) - far = read_sysreg(HIFAR); - else if (ec == HSR_EC_DABT) - far = read_sysreg(HDFAR); - else - return true; - - /* - * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode: - * - * Abort on the stage 2 translation for a memory access from a - * Non-secure PL1 or PL0 mode: - * - * For any Access flag fault or Translation fault, and also for any - * Permission fault on the stage 2 translation of a memory access - * made as part of a translation table walk for a stage 1 translation, - * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR - * is UNKNOWN. - */ - if (!(hsr & HSR_DABT_S1PTW) && (hsr & HSR_FSC_TYPE) == FSC_PERM) { - u64 par, tmp; - - par = read_sysreg(PAR); - write_sysreg(far, ATS1CPR); - isb(); - - tmp = read_sysreg(PAR); - write_sysreg(par, PAR); - - if (unlikely(tmp & 1)) - return false; /* Translation failed, back to guest */ - - hpfar = ((tmp >> 12) & ((1UL << 28) - 1)) << 4; - } else { - hpfar = read_sysreg(HPFAR); - } - - vcpu->arch.fault.hxfar = far; - vcpu->arch.fault.hpfar = hpfar; - return true; -} - -int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu) -{ - struct kvm_cpu_context *host_ctxt; - struct kvm_cpu_context *guest_ctxt; - bool fp_enabled; - u64 exit_code; - u32 fpexc; - - vcpu = kern_hyp_va(vcpu); - write_sysreg(vcpu, HTPIDR); - - host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); - guest_ctxt = &vcpu->arch.ctxt; - - __sysreg_save_state(host_ctxt); - __banked_save_state(host_ctxt); - - __activate_traps(vcpu, &fpexc); - __activate_vm(vcpu); - - __vgic_restore_state(vcpu); - __timer_enable_traps(vcpu); - - __sysreg_restore_state(guest_ctxt); - __banked_restore_state(guest_ctxt); - - /* Jump in the fire! */ -again: - exit_code = __guest_enter(vcpu, host_ctxt); - /* And we're baaack! */ - - if (exit_code == ARM_EXCEPTION_HVC && !__populate_fault_info(vcpu)) - goto again; - - fp_enabled = __vfp_enabled(); - - __banked_save_state(guest_ctxt); - __sysreg_save_state(guest_ctxt); - __timer_disable_traps(vcpu); - - __vgic_save_state(vcpu); - - __deactivate_traps(vcpu); - __deactivate_vm(vcpu); - - __banked_restore_state(host_ctxt); - __sysreg_restore_state(host_ctxt); - - if (fp_enabled) { - __vfp_save_state(&guest_ctxt->vfp); - __vfp_restore_state(&host_ctxt->vfp); - } - - write_sysreg(fpexc, VFP_FPEXC); - - return exit_code; -} - -static const char * const __hyp_panic_string[] = { - [ARM_EXCEPTION_RESET] = "\nHYP panic: RST PC:%08x CPSR:%08x", - [ARM_EXCEPTION_UNDEFINED] = "\nHYP panic: UNDEF PC:%08x CPSR:%08x", - [ARM_EXCEPTION_SOFTWARE] = "\nHYP panic: SVC PC:%08x CPSR:%08x", - [ARM_EXCEPTION_PREF_ABORT] = "\nHYP panic: PABRT PC:%08x CPSR:%08x", - [ARM_EXCEPTION_DATA_ABORT] = "\nHYP panic: DABRT PC:%08x ADDR:%08x", - [ARM_EXCEPTION_IRQ] = "\nHYP panic: IRQ PC:%08x CPSR:%08x", - [ARM_EXCEPTION_FIQ] = "\nHYP panic: FIQ PC:%08x CPSR:%08x", - [ARM_EXCEPTION_HVC] = "\nHYP panic: HVC PC:%08x CPSR:%08x", -}; - -void __hyp_text __noreturn __hyp_panic(int cause) -{ - u32 elr = read_special(ELR_hyp); - u32 val; - - if (cause == ARM_EXCEPTION_DATA_ABORT) - val = read_sysreg(HDFAR); - else - val = read_special(SPSR); - - if (read_sysreg(VTTBR)) { - struct kvm_vcpu *vcpu; - struct kvm_cpu_context *host_ctxt; - - vcpu = (struct kvm_vcpu *)read_sysreg(HTPIDR); - host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context); - __timer_disable_traps(vcpu); - __deactivate_traps(vcpu); - __deactivate_vm(vcpu); - __banked_restore_state(host_ctxt); - __sysreg_restore_state(host_ctxt); - } - - /* Call panic for real */ - __hyp_do_panic(__hyp_panic_string[cause], elr, val); - - unreachable(); -} diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c deleted file mode 100644 index 848f27bbad9d..000000000000 --- a/arch/arm/kvm/hyp/tlb.c +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Original code: - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com> - */ - -#include <asm/kvm_hyp.h> -#include <asm/kvm_mmu.h> - -/** - * Flush per-VMID TLBs - * - * __kvm_tlb_flush_vmid(struct kvm *kvm); - * - * We rely on the hardware to broadcast the TLB invalidation to all CPUs - * inside the inner-shareable domain (which is the case for all v7 - * implementations). If we come across a non-IS SMP implementation, we'll - * have to use an IPI based mechanism. Until then, we stick to the simple - * hardware assisted version. - * - * As v7 does not support flushing per IPA, just nuke the whole TLB - * instead, ignoring the ipa value. - */ -void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) -{ - dsb(ishst); - - /* Switch to requested VMID */ - kvm = kern_hyp_va(kvm); - write_sysreg(kvm_get_vttbr(kvm), VTTBR); - isb(); - - write_sysreg(0, TLBIALLIS); - dsb(ish); - isb(); - - write_sysreg(0, VTTBR); -} - -void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) -{ - __kvm_tlb_flush_vmid(kvm); -} - -void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) -{ - struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); - - /* Switch to requested VMID */ - write_sysreg(kvm_get_vttbr(kvm), VTTBR); - isb(); - - write_sysreg(0, TLBIALL); - dsb(nsh); - isb(); - - write_sysreg(0, VTTBR); -} - -void __hyp_text __kvm_flush_vm_context(void) -{ - write_sysreg(0, TLBIALLNSNHIS); - write_sysreg(0, ICIALLUIS); - dsb(ish); -} diff --git a/arch/arm/kvm/hyp/vfp.S b/arch/arm/kvm/hyp/vfp.S deleted file mode 100644 index 675a52348d8d..000000000000 --- a/arch/arm/kvm/hyp/vfp.S +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#include <linux/linkage.h> -#include <asm/vfpmacros.h> - - .text - .pushsection .hyp.text, "ax" - -/* void __vfp_save_state(struct vfp_hard_struct *vfp); */ -ENTRY(__vfp_save_state) - push {r4, r5} - VFPFMRX r1, FPEXC - - @ Make sure *really* VFP is enabled so we can touch the registers. - orr r5, r1, #FPEXC_EN - tst r5, #FPEXC_EX @ Check for VFP Subarchitecture - bic r5, r5, #FPEXC_EX @ FPEXC_EX disable - VFPFMXR FPEXC, r5 - isb - - VFPFMRX r2, FPSCR - beq 1f - - @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so - @ we only need to save them if FPEXC_EX is set. - VFPFMRX r3, FPINST - tst r5, #FPEXC_FP2V - VFPFMRX r4, FPINST2, ne @ vmrsne -1: - VFPFSTMIA r0, r5 @ Save VFP registers - stm r0, {r1-r4} @ Save FPEXC, FPSCR, FPINST, FPINST2 - pop {r4, r5} - bx lr -ENDPROC(__vfp_save_state) - -/* void __vfp_restore_state(struct vfp_hard_struct *vfp); - * Assume FPEXC_EN is on and FPEXC_EX is off */ -ENTRY(__vfp_restore_state) - VFPFLDMIA r0, r1 @ Load VFP registers - ldm r0, {r0-r3} @ Load FPEXC, FPSCR, FPINST, FPINST2 - - VFPFMXR FPSCR, r1 - tst r0, #FPEXC_EX @ Check for VFP Subarchitecture - beq 1f - VFPFMXR FPINST, r2 - tst r0, #FPEXC_FP2V - VFPFMXR FPINST2, r3, ne -1: - VFPFMXR FPEXC, r0 @ FPEXC (last, in case !EN) - bx lr -ENDPROC(__vfp_restore_state) - - .popsection diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S deleted file mode 100644 index 33e34b6d24b2..000000000000 --- a/arch/arm/kvm/init.S +++ /dev/null @@ -1,157 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/unified.h> -#include <asm/asm-offsets.h> -#include <asm/kvm_asm.h> -#include <asm/kvm_arm.h> -#include <asm/kvm_mmu.h> -#include <asm/virt.h> - -/******************************************************************** - * Hypervisor initialization - * - should be called with: - * r0 = top of Hyp stack (kernel VA) - * r1 = pointer to hyp vectors - * r2,r3 = Hypervisor pgd pointer - * - * The init scenario is: - * - We jump in HYP with 3 parameters: runtime HYP pgd, runtime stack, - * runtime vectors - * - Invalidate TLBs - * - Set stack and vectors - * - Setup the page tables - * - Enable the MMU - * - Profit! (or eret, if you only care about the code). - * - * Another possibility is to get a HYP stub hypercall. - * We discriminate between the two by checking if r0 contains a value - * that is less than HVC_STUB_HCALL_NR. - */ - - .text - .pushsection .hyp.idmap.text,"ax" - .align 5 -__kvm_hyp_init: - .globl __kvm_hyp_init - - @ Hyp-mode exception vector - W(b) . - W(b) . - W(b) . - W(b) . - W(b) . - W(b) __do_hyp_init - W(b) . - W(b) . - -__do_hyp_init: - @ Check for a stub hypercall - cmp r0, #HVC_STUB_HCALL_NR - blo __kvm_handle_stub_hvc - - @ Set stack pointer - mov sp, r0 - - @ Set HVBAR to point to the HYP vectors - mcr p15, 4, r1, c12, c0, 0 @ HVBAR - - @ Set the HTTBR to point to the hypervisor PGD pointer passed - mcrr p15, 4, rr_lo_hi(r2, r3), c2 - - @ Set the HTCR and VTCR to the same shareability and cacheability - @ settings as the non-secure TTBCR and with T0SZ == 0. - mrc p15, 4, r0, c2, c0, 2 @ HTCR - ldr r2, =HTCR_MASK - bic r0, r0, r2 - mrc p15, 0, r1, c2, c0, 2 @ TTBCR - and r1, r1, #(HTCR_MASK & ~TTBCR_T0SZ) - orr r0, r0, r1 - mcr p15, 4, r0, c2, c0, 2 @ HTCR - - @ Use the same memory attributes for hyp. accesses as the kernel - @ (copy MAIRx ro HMAIRx). - mrc p15, 0, r0, c10, c2, 0 - mcr p15, 4, r0, c10, c2, 0 - mrc p15, 0, r0, c10, c2, 1 - mcr p15, 4, r0, c10, c2, 1 - - @ Invalidate the stale TLBs from Bootloader - mcr p15, 4, r0, c8, c7, 0 @ TLBIALLH - dsb ish - - @ Set the HSCTLR to: - @ - ARM/THUMB exceptions: Kernel config (Thumb-2 kernel) - @ - Endianness: Kernel config - @ - Fast Interrupt Features: Kernel config - @ - Write permission implies XN: disabled - @ - Instruction cache: enabled - @ - Data/Unified cache: enabled - @ - MMU: enabled (this code must be run from an identity mapping) - mrc p15, 4, r0, c1, c0, 0 @ HSCR - ldr r2, =HSCTLR_MASK - bic r0, r0, r2 - mrc p15, 0, r1, c1, c0, 0 @ SCTLR - ldr r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C) - and r1, r1, r2 - ARM( ldr r2, =(HSCTLR_M) ) - THUMB( ldr r2, =(HSCTLR_M | HSCTLR_TE) ) - orr r1, r1, r2 - orr r0, r0, r1 - mcr p15, 4, r0, c1, c0, 0 @ HSCR - isb - - eret - -ENTRY(__kvm_handle_stub_hvc) - cmp r0, #HVC_SOFT_RESTART - bne 1f - - /* The target is expected in r1 */ - msr ELR_hyp, r1 - mrs r0, cpsr - bic r0, r0, #MODE_MASK - orr r0, r0, #HYP_MODE -THUMB( orr r0, r0, #PSR_T_BIT ) - msr spsr_cxsf, r0 - b reset - -1: cmp r0, #HVC_RESET_VECTORS - bne 1f - -reset: - /* We're now in idmap, disable MMU */ - mrc p15, 4, r1, c1, c0, 0 @ HSCTLR - ldr r0, =(HSCTLR_M | HSCTLR_A | HSCTLR_C | HSCTLR_I) - bic r1, r1, r0 - mcr p15, 4, r1, c1, c0, 0 @ HSCTLR - - /* - * Install stub vectors, using ardb's VA->PA trick. - */ -0: adr r0, 0b @ PA(0) - movw r1, #:lower16:__hyp_stub_vectors - 0b @ VA(stub) - VA(0) - movt r1, #:upper16:__hyp_stub_vectors - 0b - add r1, r1, r0 @ PA(stub) - mcr p15, 4, r1, c12, c0, 0 @ HVBAR - b exit - -1: ldr r0, =HVC_STUB_ERR - eret - -exit: - mov r0, #0 - eret -ENDPROC(__kvm_handle_stub_hvc) - - .ltorg - - .globl __kvm_hyp_init_end -__kvm_hyp_init_end: - - .popsection diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S deleted file mode 100644 index 064f4f118ca7..000000000000 --- a/arch/arm/kvm/interrupts.S +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ - -#include <linux/linkage.h> - - .text - -/******************************************************************** - * Call function in Hyp mode - * - * - * unsigned long kvm_call_hyp(void *hypfn, ...); - * - * This is not really a variadic function in the classic C-way and care must - * be taken when calling this to ensure parameters are passed in registers - * only, since the stack will change between the caller and the callee. - * - * Call the function with the first argument containing a pointer to the - * function you wish to call in Hyp mode, and subsequent arguments will be - * passed as r0, r1, and r2 (a maximum of 3 arguments in addition to the - * function pointer can be passed). The function being called must be mapped - * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are - * passed in r0 (strictly 32bit). - * - * The calling convention follows the standard AAPCS: - * r0 - r3: caller save - * r12: caller save - * rest: callee save - */ -ENTRY(__kvm_call_hyp) - hvc #0 - bx lr -ENDPROC(__kvm_call_hyp) diff --git a/arch/arm/kvm/irq.h b/arch/arm/kvm/irq.h deleted file mode 100644 index 0d257de42c10..000000000000 --- a/arch/arm/kvm/irq.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * irq.h: in kernel interrupt controller related definitions - * Copyright (c) 2016 Red Hat, Inc. - * - * This header is included by irqchip.c. However, on ARM, interrupt - * controller declarations are located in include/kvm/arm_vgic.h since - * they are mostly shared between arm and arm64. - */ - -#ifndef __IRQ_H -#define __IRQ_H - -#include <kvm/arm_vgic.h> - -#endif diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c deleted file mode 100644 index eb4174f6ebbd..000000000000 --- a/arch/arm/kvm/reset.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - */ -#include <linux/compiler.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kvm_host.h> -#include <linux/kvm.h> - -#include <asm/unified.h> -#include <asm/ptrace.h> -#include <asm/cputype.h> -#include <asm/kvm_arm.h> -#include <asm/kvm_coproc.h> -#include <asm/kvm_emulate.h> - -#include <kvm/arm_arch_timer.h> - -/****************************************************************************** - * Cortex-A15 and Cortex-A7 Reset Values - */ - -static struct kvm_regs cortexa_regs_reset = { - .usr_regs.ARM_cpsr = SVC_MODE | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT, -}; - - -/******************************************************************************* - * Exported reset function - */ - -/** - * kvm_reset_vcpu - sets core registers and cp15 registers to reset value - * @vcpu: The VCPU pointer - * - * This function finds the right table above and sets the registers on the - * virtual CPU struct to their architecturally defined reset values. - */ -int kvm_reset_vcpu(struct kvm_vcpu *vcpu) -{ - struct kvm_regs *reset_regs; - - switch (vcpu->arch.target) { - case KVM_ARM_TARGET_CORTEX_A7: - case KVM_ARM_TARGET_CORTEX_A15: - reset_regs = &cortexa_regs_reset; - vcpu->arch.midr = read_cpuid_id(); - break; - default: - return -ENODEV; - } - - /* Reset core registers */ - memcpy(&vcpu->arch.ctxt.gp_regs, reset_regs, sizeof(vcpu->arch.ctxt.gp_regs)); - - /* Reset CP15 registers */ - kvm_reset_coprocs(vcpu); - - /* - * Additional reset state handling that PSCI may have imposed on us. - * Must be done after all the sys_reg reset. - */ - if (READ_ONCE(vcpu->arch.reset_state.reset)) { - unsigned long target_pc = vcpu->arch.reset_state.pc; - - /* Gracefully handle Thumb2 entry point */ - if (target_pc & 1) { - target_pc &= ~1UL; - vcpu_set_thumb(vcpu); - } - - /* Propagate caller endianness */ - if (vcpu->arch.reset_state.be) - kvm_vcpu_set_be(vcpu); - - *vcpu_pc(vcpu) = target_pc; - vcpu_set_reg(vcpu, 0, vcpu->arch.reset_state.r0); - - vcpu->arch.reset_state.reset = false; - } - - /* Reset arch_timer context */ - return kvm_timer_vcpu_reset(vcpu); -} diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h deleted file mode 100644 index 69a9d62a0ac6..000000000000 --- a/arch/arm/kvm/trace.h +++ /dev/null @@ -1,86 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#if !defined(_TRACE_ARM_KVM_H) || defined(TRACE_HEADER_MULTI_READ) -#define _TRACE_ARM_KVM_H - -#include <linux/tracepoint.h> - -#undef TRACE_SYSTEM -#define TRACE_SYSTEM kvm - -/* Architecturally implementation defined CP15 register access */ -TRACE_EVENT(kvm_emulate_cp15_imp, - TP_PROTO(unsigned long Op1, unsigned long Rt1, unsigned long CRn, - unsigned long CRm, unsigned long Op2, bool is_write), - TP_ARGS(Op1, Rt1, CRn, CRm, Op2, is_write), - - TP_STRUCT__entry( - __field( unsigned int, Op1 ) - __field( unsigned int, Rt1 ) - __field( unsigned int, CRn ) - __field( unsigned int, CRm ) - __field( unsigned int, Op2 ) - __field( bool, is_write ) - ), - - TP_fast_assign( - __entry->is_write = is_write; - __entry->Op1 = Op1; - __entry->Rt1 = Rt1; - __entry->CRn = CRn; - __entry->CRm = CRm; - __entry->Op2 = Op2; - ), - - TP_printk("Implementation defined CP15: %s\tp15, %u, r%u, c%u, c%u, %u", - (__entry->is_write) ? "mcr" : "mrc", - __entry->Op1, __entry->Rt1, __entry->CRn, - __entry->CRm, __entry->Op2) -); - -TRACE_EVENT(kvm_wfx, - TP_PROTO(unsigned long vcpu_pc, bool is_wfe), - TP_ARGS(vcpu_pc, is_wfe), - - TP_STRUCT__entry( - __field( unsigned long, vcpu_pc ) - __field( bool, is_wfe ) - ), - - TP_fast_assign( - __entry->vcpu_pc = vcpu_pc; - __entry->is_wfe = is_wfe; - ), - - TP_printk("guest executed wf%c at: 0x%08lx", - __entry->is_wfe ? 'e' : 'i', __entry->vcpu_pc) -); - -TRACE_EVENT(kvm_hvc, - TP_PROTO(unsigned long vcpu_pc, unsigned long r0, unsigned long imm), - TP_ARGS(vcpu_pc, r0, imm), - - TP_STRUCT__entry( - __field( unsigned long, vcpu_pc ) - __field( unsigned long, r0 ) - __field( unsigned long, imm ) - ), - - TP_fast_assign( - __entry->vcpu_pc = vcpu_pc; - __entry->r0 = r0; - __entry->imm = imm; - ), - - TP_printk("HVC at 0x%08lx (r0: 0x%08lx, imm: 0x%lx", - __entry->vcpu_pc, __entry->r0, __entry->imm) -); - -#endif /* _TRACE_ARM_KVM_H */ - -#undef TRACE_INCLUDE_PATH -#define TRACE_INCLUDE_PATH . -#undef TRACE_INCLUDE_FILE -#define TRACE_INCLUDE_FILE trace - -/* This part must be outside protection */ -#include <trace/define_trace.h> diff --git a/arch/arm/kvm/vgic-v3-coproc.c b/arch/arm/kvm/vgic-v3-coproc.c deleted file mode 100644 index ed3b2e4759ce..000000000000 --- a/arch/arm/kvm/vgic-v3-coproc.c +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * VGIC system registers handling functions for AArch32 mode - */ - -#include <linux/kvm.h> -#include <linux/kvm_host.h> -#include <asm/kvm_emulate.h> -#include "vgic.h" - -int vgic_v3_has_cpu_sysregs_attr(struct kvm_vcpu *vcpu, bool is_write, u64 id, - u64 *reg) -{ - /* - * TODO: Implement for AArch32 - */ - return -ENXIO; -} - -int vgic_v3_cpu_sysregs_uaccess(struct kvm_vcpu *vcpu, bool is_write, u64 id, - u64 *reg) -{ - /* - * TODO: Implement for AArch32 - */ - return -ENXIO; -} diff --git a/arch/arm/mach-at91/.gitignore b/arch/arm/mach-at91/.gitignore index 2ecd6f51c8a9..f6d47389675e 100644 --- a/arch/arm/mach-at91/.gitignore +++ b/arch/arm/mach-at91/.gitignore @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only pm_data-offsets.h diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 7979420bd48b..ccd7e80ce943 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -153,7 +153,6 @@ config HAVE_AT91_USB_CLK config COMMON_CLK_AT91 bool - select COMMON_CLK select MFD_SYSCON config HAVE_AT91_SMD diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 374b9d155558..074bde64064e 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -736,13 +736,36 @@ backup_default: struct pmc_info { unsigned long uhp_udp_mask; + unsigned long mckr; + unsigned long version; }; static const struct pmc_info pmc_infos[] __initconst = { - { .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP }, - { .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP }, - { .uhp_udp_mask = AT91SAM926x_PMC_UHP }, - { .uhp_udp_mask = 0 }, + { + .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP, + .mckr = 0x30, + .version = AT91_PMC_V1, + }, + + { + .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP, + .mckr = 0x30, + .version = AT91_PMC_V1, + }, + { + .uhp_udp_mask = AT91SAM926x_PMC_UHP, + .mckr = 0x30, + .version = AT91_PMC_V1, + }, + { .uhp_udp_mask = 0, + .mckr = 0x30, + .version = AT91_PMC_V1, + }, + { + .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP, + .mckr = 0x28, + .version = AT91_PMC_V2, + }, }; static const struct of_device_id atmel_pmc_ids[] __initconst = { @@ -757,7 +780,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = { { .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] }, - { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] }, + { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] }, { /* sentinel */ }, }; @@ -779,6 +802,8 @@ static void __init at91_pm_init(void (*pm_idle)(void)) pmc = of_id->data; soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask; + soc_pm.data.pmc_mckr_offset = pmc->mckr; + soc_pm.data.pmc_version = pmc->version; if (pm_idle) arm_pm_idle = pm_idle; diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 9fa4f483f2b5..218e8d1a30fb 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -33,6 +33,8 @@ struct at91_pm_data { void __iomem *sfrbu; unsigned int standby_mode; unsigned int suspend_mode; + unsigned int pmc_mckr_offset; + unsigned int pmc_version; }; #endif diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c index f2d893c03cd9..82089ff258c0 100644 --- a/arch/arm/mach-at91/pm_data-offsets.c +++ b/arch/arm/mach-at91/pm_data-offsets.c @@ -12,6 +12,10 @@ int main(void) DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode)); DEFINE(PM_DATA_SHDWC, offsetof(struct at91_pm_data, shdwc)); DEFINE(PM_DATA_SFRBU, offsetof(struct at91_pm_data, sfrbu)); + DEFINE(PM_DATA_PMC_MCKR_OFFSET, offsetof(struct at91_pm_data, + pmc_mckr_offset)); + DEFINE(PM_DATA_PMC_VERSION, offsetof(struct at91_pm_data, + pmc_version)); return 0; } diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index ed57c879d4e1..be9764e8d3fa 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -18,6 +18,7 @@ pmc .req r0 tmp1 .req r4 tmp2 .req r5 +tmp3 .req r6 /* * Wait until master clock is ready (after switching master clock source) @@ -93,13 +94,17 @@ ENTRY(at91_pm_suspend_in_sram) str tmp1, .memtype ldr tmp1, [r0, #PM_DATA_MODE] str tmp1, .pm_mode + ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET] + str tmp1, .mckr_offset + ldr tmp1, [r0, #PM_DATA_PMC_VERSION] + str tmp1, .pmc_version /* Both ldrne below are here to preload their address in the TLB */ ldr tmp1, [r0, #PM_DATA_SHDWC] str tmp1, .shdwc cmp tmp1, #0 ldrne tmp2, [tmp1, #0] ldr tmp1, [r0, #PM_DATA_SFRBU] - str tmp1, .sfr + str tmp1, .sfrbu cmp tmp1, #0 ldrne tmp2, [tmp1, #0x10] @@ -138,14 +143,15 @@ ENDPROC(at91_pm_suspend_in_sram) ENTRY(at91_backup_mode) /* Switch the master clock source to slow clock. */ ldr pmc, .pmc_base - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp2, .mckr_offset + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy /*BUMEN*/ - ldr r0, .sfr + ldr r0, .sfrbu mov tmp1, #0x1 str tmp1, [r0, #0x10] @@ -218,6 +224,7 @@ ENDPROC(at91_backup_mode) */ .macro at91_pm_ulp1_mode ldr pmc, .pmc_base + ldr tmp2, .mckr_offset /* Save RC oscillator state and check if it is enabled. */ ldr tmp1, [pmc, #AT91_PMC_SR] @@ -254,10 +261,10 @@ ENDPROC(at91_backup_mode) str tmp1, [pmc, #AT91_CKGR_MOR] /* Switch the master clock source to main clock */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS orr tmp1, tmp1, #AT91_PMC_CSS_MAIN - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -268,6 +275,10 @@ ENDPROC(at91_backup_mode) orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] + /* Quirk for SAM9X60's PMC */ + nop + nop + wait_mckrdy /* Enable the crystal oscillator */ @@ -280,9 +291,9 @@ ENDPROC(at91_backup_mode) wait_moscrdy /* Switch the master clock source to slow clock */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -296,10 +307,10 @@ ENDPROC(at91_backup_mode) wait_moscsels /* Switch the master clock source to main clock */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] bic tmp1, tmp1, #AT91_PMC_CSS orr tmp1, tmp1, #AT91_PMC_CSS_MAIN - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy @@ -323,21 +334,160 @@ ENDPROC(at91_backup_mode) 3: .endm +.macro at91_plla_disable + /* Save PLLA setting and disable it */ + ldr tmp1, .pmc_version + cmp tmp1, #AT91_PMC_V1 + beq 1f + +#ifdef CONFIG_SOC_SAM9X60 + /* Save PLLA settings. */ + ldr tmp2, [pmc, #AT91_PMC_PLL_UPDT] + bic tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID + str tmp2, [pmc, #AT91_PMC_PLL_UPDT] + + /* save div. */ + mov tmp1, #0 + ldr tmp2, [pmc, #AT91_PMC_PLL_CTRL0] + bic tmp2, tmp2, #0xffffff00 + orr tmp1, tmp1, tmp2 + + /* save mul. */ + ldr tmp2, [pmc, #AT91_PMC_PLL_CTRL1] + bic tmp2, tmp2, #0xffffff + orr tmp1, tmp1, tmp2 + str tmp1, .saved_pllar + + /* step 2. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 3. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + bic tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK + orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL + str tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + + /* step 4. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 5. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + bic tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL + str tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + + /* step 7. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + b 2f +#endif + +1: /* Save PLLA setting and disable it */ + ldr tmp1, [pmc, #AT91_CKGR_PLLAR] + str tmp1, .saved_pllar + + /* Disable PLLA. */ + mov tmp1, #AT91_PMC_PLLCOUNT + orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ + str tmp1, [pmc, #AT91_CKGR_PLLAR] +2: +.endm + +.macro at91_plla_enable + ldr tmp2, .saved_pllar + ldr tmp3, .pmc_version + cmp tmp3, #AT91_PMC_V1 + beq 4f + +#ifdef CONFIG_SOC_SAM9X60 + /* step 1. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 2. */ + ldr tmp1, =#AT91_PMC_PLL_ACR_DEFAULT_PLLA + str tmp1, [pmc, #AT91_PMC_PLL_ACR] + + /* step 3. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL1] + mov tmp3, tmp2 + bic tmp3, tmp3, #0xffffff + orr tmp1, tmp1, tmp3 + str tmp1, [pmc, #AT91_PMC_PLL_CTRL1] + + /* step 8. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 9. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENLOCK + orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL + orr tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK + bic tmp1, tmp1, #0xff + mov tmp3, tmp2 + bic tmp3, tmp3, #0xffffff00 + orr tmp1, tmp1, tmp3 + str tmp1, [pmc, #AT91_PMC_PLL_CTRL0] + + /* step 10. */ + ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT] + orr tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE + bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID + str tmp1, [pmc, #AT91_PMC_PLL_UPDT] + + /* step 11. */ +3: ldr tmp1, [pmc, #AT91_PMC_PLL_ISR0] + tst tmp1, #0x1 + beq 3b + b 2f +#endif + + /* Restore PLLA setting */ +4: str tmp2, [pmc, #AT91_CKGR_PLLAR] + + /* Enable PLLA. */ + tst tmp2, #(AT91_PMC_MUL & 0xff0000) + bne 1f + tst tmp2, #(AT91_PMC_MUL & ~0xff0000) + beq 2f + +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKA + beq 1b +2: +.endm + ENTRY(at91_ulp_mode) ldr pmc, .pmc_base + ldr tmp2, .mckr_offset /* Save Master clock setting */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, [pmc, tmp2] str tmp1, .saved_mckr /* * Set the Master clock source to slow clock */ bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, [pmc, tmp2] wait_mckrdy + at91_plla_disable + ldr r0, .pm_mode cmp r0, #AT91_PM_ULP1 beq ulp1_mode @@ -352,11 +502,14 @@ ulp1_mode: ulp_exit: ldr pmc, .pmc_base + at91_plla_enable + /* * Restore master clock setting */ - ldr tmp1, .saved_mckr - str tmp1, [pmc, #AT91_PMC_MCKR] + ldr tmp1, .mckr_offset + ldr tmp2, .saved_mckr + str tmp2, [pmc, tmp1] wait_mckrdy @@ -496,14 +649,20 @@ ENDPROC(at91_sramc_self_refresh) .word 0 .shdwc: .word 0 -.sfr: +.sfrbu: .word 0 .memtype: .word 0 .pm_mode: .word 0 +.mckr_offset: + .word 0 +.pmc_version: + .word 0 .saved_mckr: .word 0 +.saved_pllar: + .word 0 .saved_sam9_lpr: .word 0 .saved_sam9_lpr1: diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index fcfe2a0e8058..6aa938b949db 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -20,7 +20,6 @@ config ARCH_BCM_IPROC select GPIOLIB select ARM_AMBA select PINCTRL - select PCI_DOMAINS_GENERIC if PCI help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common @@ -54,7 +53,6 @@ config ARCH_BCM_NSP select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_ERRATA_764369 if SMP - select HAVE_SMP select THERMAL select THERMAL_OF help @@ -73,7 +71,6 @@ config ARCH_BCM_5301X select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_ERRATA_764369 if SMP - select HAVE_SMP help Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. @@ -109,7 +106,6 @@ config ARCH_BCM_281XX bool "Broadcom BCM281XX SoC family" depends on ARCH_MULTI_V7 select ARCH_BCM_MOBILE - select HAVE_SMP help Enable support for the BCM281XX family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 @@ -119,7 +115,6 @@ config ARCH_BCM_21664 bool "Broadcom BCM21664 SoC family" depends on ARCH_MULTI_V7 select ARCH_BCM_MOBILE - select HAVE_SMP help Enable support for the BCM21664 family, which includes BCM21663 and BCM21664 variants. @@ -128,7 +123,6 @@ config ARCH_BCM_23550 bool "Broadcom BCM23550 SoC" depends on ARCH_MULTI_V7 select ARCH_BCM_MOBILE - select HAVE_SMP help Enable support for the BCM23550. @@ -165,7 +159,6 @@ config ARCH_BCM2835 select ZONE_DMA if ARCH_MULTI_V7 select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 - select TIMER_OF select BCM2835_TIMER select PINCTRL select PINCTRL_BCM2835 @@ -201,7 +194,6 @@ config ARCH_BCM_63XX select HAVE_ARM_ARCH_TIMER select HAVE_ARM_TWD if SMP select HAVE_ARM_SCU if SMP - select HAVE_SMP help This enables support for systems based on Broadcom DSL SoCs. It currently supports the 'BCM63XX' ARM-based family, which includes diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 1d61a7701c11..e4f4b20b83a2 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -189,12 +189,6 @@ static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction cns3xxx_timer_irq = { - .name = "timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = cns3xxx_timer_interrupt, -}; - /* * Set up the clock source and clock events devices */ @@ -245,7 +239,9 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq) writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); /* Make irqs happen for the system timer */ - setup_irq(timer_irq, &cns3xxx_timer_irq); + if (request_irq(timer_irq, cns3xxx_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL)) + pr_err("Failed to request irq %d (timer)\n", timer_irq); cns3xxx_clockevents_init(timer_irq); } diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 01b830afcea9..dbe970e37895 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -48,7 +48,7 @@ /***************************************************************************** * I/O Address Mapping ****************************************************************************/ -static struct map_desc dove_io_desc[] __initdata = { +static struct map_desc __maybe_unused dove_io_desc[] __initdata = { { .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE), diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index da2ff4f61d6b..575b2e2b6759 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -201,17 +201,13 @@ ebsa110_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction ebsa110_timer_irq = { - .name = "EBSA110 Timer Tick", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = ebsa110_timer_interrupt, -}; - /* * Set up timer interrupt. */ void __init ebsa110_timer_init(void) { + int irq = IRQ_EBSA110_TIMER0; + arch_gettimeoffset = ebsa110_gettimeoffset; /* @@ -221,7 +217,9 @@ void __init ebsa110_timer_init(void) __raw_writeb(COUNT & 0xff, PIT_T1); __raw_writeb(COUNT >> 8, PIT_T1); - setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq); + if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + "EBSA110 Timer Tick", NULL)) + pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq); } static struct plat_serial8250_port serial_platform_data[] = { diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c index de998830f534..dd4b164d1831 100644 --- a/arch/arm/mach-ep93xx/timer-ep93xx.c +++ b/arch/arm/mach-ep93xx/timer-ep93xx.c @@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction ep93xx_timer_irq = { - .name = "ep93xx timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = ep93xx_timer_interrupt, - .dev_id = &ep93xx_clockevent, -}; - void __init ep93xx_timer_init(void) { + int irq = IRQ_EP93XX_TIMER3; + unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL; + /* Enable and register clocksource and sched_clock on timer 4 */ writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, EP93XX_TIMER4_VALUE_HIGH); @@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void) EP93XX_TIMER4_RATE); /* Set up clockevent on timer 3 */ - setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq); + if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer", + &ep93xx_clockevent)) + pr_err("Failed to request irq %d (ep93xx timer)\n", irq); clockevents_config_and_register(&ep93xx_clockevent, EP93XX_TIMER123_RATE, 1, diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index cbbe03e96de8..76838255b5fa 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -21,7 +21,7 @@ menuconfig ARCH_EXYNOS select EXYNOS_SROM select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS select GPIOLIB - select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5 && VIRTUALIZATION + select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5 select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index f76212d2dbf1..2908c9ef3c9b 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -101,13 +101,6 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction footbridge_timer_irq = { - .name = "dc21285_timer1", - .handler = timer1_interrupt, - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .dev_id = &ckevt_dc21285, -}; - /* * Set up timer interrupt. */ @@ -118,7 +111,9 @@ void __init footbridge_timer_init(void) clocksource_register_hz(&cksrc_dc21285, rate); - setup_irq(ce->irq, &footbridge_timer_irq); + if (request_irq(ce->irq, timer1_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + "dc21285_timer1", &ckevt_dc21285)) + pr_err("Failed to request irq %d (dc21285_timer1)", ce->irq); ce->cpumask = cpumask_of(smp_processor_id()); clockevents_config_and_register(ce, rate, 0x4, 0xffffff); diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c index 88a553932c33..842ddb4121ef 100644 --- a/arch/arm/mach-footbridge/isa-irq.c +++ b/arch/arm/mach-footbridge/isa-irq.c @@ -96,11 +96,6 @@ static void isa_irq_handler(struct irq_desc *desc) generic_handle_irq(isa_irq); } -static struct irqaction irq_cascade = { - .handler = no_action, - .name = "cascade", -}; - static struct resource pic1_resource = { .name = "pic1", .start = 0x20, @@ -160,7 +155,10 @@ void __init isa_init_irq(unsigned int host_irq) request_resource(&ioport_resource, &pic1_resource); request_resource(&ioport_resource, &pic2_resource); - setup_irq(IRQ_ISA_CASCADE, &irq_cascade); + + irq = IRQ_ISA_CASCADE; + if (request_irq(irq, no_action, 0, "cascade", NULL)) + pr_err("Failed to request irq %u (cascade)\n", irq); irq_set_chained_handler(host_irq, isa_irq_handler); diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index 82f45591fb2c..723e3eae995d 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -25,17 +25,12 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction pit_timer_irq = { - .name = "pit", - .handler = pit_timer_interrupt, - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .dev_id = &i8253_clockevent, -}; - void __init isa_timer_init(void) { clocksource_i8253_init(); - setup_irq(i8253_clockevent.irq, &pit_timer_irq); + if (request_irq(i8253_clockevent.irq, pit_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "pit", &i8253_clockevent)) + pr_err("Failed to request irq %d(pit)\n", i8253_clockevent.irq); clockevent_i8253_init(false); } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 95584ee02b55..e7d7b90e2cf8 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -471,8 +471,6 @@ config SOC_IMX53 config SOC_IMX6 bool select ARM_CPU_SUSPEND if (PM || CPU_IDLE) - select ARM_ERRATA_754322 - select ARM_ERRATA_775420 select ARM_GIC select HAVE_IMX_ANATOP select HAVE_IMX_GPC @@ -484,6 +482,8 @@ config SOC_IMX6 config SOC_IMX6Q bool "i.MX6 Quad/DualLite support" select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD select PINCTRL_IMX6Q @@ -494,6 +494,8 @@ config SOC_IMX6Q config SOC_IMX6SL bool "i.MX6 SoloLite support" + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 select PINCTRL_IMX6SL select SOC_IMX6 @@ -502,6 +504,8 @@ config SOC_IMX6SL config SOC_IMX6SLL bool "i.MX6 SoloLiteLite support" + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 select PINCTRL_IMX6SLL select SOC_IMX6 @@ -510,6 +514,8 @@ config SOC_IMX6SLL config SOC_IMX6SX bool "i.MX6 SoloX support" + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 select PINCTRL_IMX6SX select SOC_IMX6 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 03506ce46149..e7364e6c8c6b 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -91,8 +91,10 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif +ifeq ($(CONFIG_ARM_CPU_SUSPEND),y) AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a obj-$(CONFIG_SOC_IMX6) += resume-imx6.o +endif obj-$(CONFIG_SOC_IMX6) += pm-imx6.o obj-$(CONFIG_SOC_IMX1) += mach-imx1.o diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 8fb68c0ec34c..d841bed8664d 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -89,12 +89,11 @@ void imx_anatop_post_resume(void) if (cpu_is_imx6sl()) imx_anatop_disconnect_high_snvs(false); - } void __init imx_init_revision_from_anatop(void) { - struct device_node *np; + struct device_node *np, *src_np; void __iomem *anatop_base; unsigned int revision; u32 digprog; @@ -135,9 +134,10 @@ void __init imx_init_revision_from_anatop(void) void __iomem *src_base; u32 sbmr2; - np = of_find_compatible_node(NULL, NULL, + src_np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-src"); src_base = of_iomap(np, 0); + of_node_put(src_np); WARN_ON(!src_base); sbmr2 = readl_relaxed(src_base + SRC_SBMR2); iounmap(src_base); @@ -149,6 +149,7 @@ void __init imx_init_revision_from_anatop(void) } } } + of_node_put(np); mxc_set_cpu_type(digprog >> 16 & 0xff); imx_set_soc_revision(revision); diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index b5b557fe2c49..ebc4339b8be4 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -10,7 +10,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/irqchip/arm-gic.h> + #include "common.h" #include "hardware.h" @@ -111,7 +111,6 @@ void imx_gpc_mask_all(void) gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4); writel_relaxed(~0, reg_imr1 + i * 4); } - } void imx_gpc_restore_all(void) @@ -282,4 +281,5 @@ void __init imx_gpc_check_dt(void) /* map GPC, so that at least CPUidle and WARs keep working */ gpc_base = of_iomap(np, 0); } + of_node_put(np); } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index edd26e0ffeec..284bce1112d2 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -5,29 +5,16 @@ */ #include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/cpu.h> -#include <linux/delay.h> -#include <linux/export.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/irq.h> #include <linux/irqchip.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/pm_opp.h> #include <linux/pci.h> #include <linux/phy.h> -#include <linux/reboot.h> #include <linux/regmap.h> #include <linux/micrel_phy.h> #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/system_misc.h> #include "common.h" #include "cpuidle.h" diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index e00818abe54d..e27a6889cc56 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -4,7 +4,6 @@ */ #include <linux/irqchip.h> -#include <linux/of.h> #include <linux/of_platform.h> #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 311f5e4ff723..3b0e16ccd59d 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -25,7 +25,6 @@ static void __init imx6ul_enet_clk_init(void) IMX6UL_GPR1_ENET_CLK_OUTPUT); else pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n"); - } static int ksz8081_phy_fixup(struct phy_device *dev) diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 2aa26928221d..cf4e9335831c 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -109,6 +109,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus) np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg"); dcfg_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!dcfg_base); paddr = __pa_symbol(secondary_startup); diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 1c0ecad3620e..dd34dff13762 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -655,6 +655,8 @@ void __init imx6_pm_ccm_init(const char *ccm_compat) if (of_property_read_bool(np, "fsl,pmic-stby-poweroff")) imx6_pm_stby_poweroff_probe(); + + of_node_put(np); } void __init imx6q_pm_init(void) diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c index 7b2f7387e662..2e756d8191fa 100644 --- a/arch/arm/mach-imx/pm-imx7ulp.c +++ b/arch/arm/mach-imx/pm-imx7ulp.c @@ -62,6 +62,7 @@ void __init imx7ulp_pm_init(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1"); smc1_base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!smc1_base); imx7ulp_set_lpm(ULP_PM_RUN); diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 0beea6d0217f..f52f371292ac 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -43,9 +43,6 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev, int bit; u32 val; - if (!src_base) - return -ENODEV; - if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits)) return -EINVAL; diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 1ecbea5331d6..6f875ded8419 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -410,13 +410,10 @@ static int __ref impd1_probe(struct lm_device *dev) * 5 = Key lower right */ /* We need the two MMCI GPIO entries */ - lookup->table[0].chip_label = chipname; - lookup->table[0].chip_hwnum = 3; - lookup->table[0].con_id = "wp"; - lookup->table[1].chip_label = chipname; - lookup->table[1].chip_hwnum = 4; - lookup->table[1].con_id = "cd"; - lookup->table[1].flags = GPIO_ACTIVE_LOW; + lookup->table[0] = (struct gpiod_lookup) + GPIO_LOOKUP(chipname, 3, "wp", 0); + lookup->table[1] = (struct gpiod_lookup) + GPIO_LOOKUP(chipname, 4, "cd", GPIO_ACTIVE_LOW); gpiod_add_lookup_table(lookup); } diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c index 18a4df5c1baa..ae533b66fefd 100644 --- a/arch/arm/mach-iop32x/time.c +++ b/arch/arm/mach-iop32x/time.c @@ -137,13 +137,6 @@ iop_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction iop_timer_irq = { - .name = "IOP Timer Tick", - .handler = iop_timer_interrupt, - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .dev_id = &iop_clockevent, -}; - static unsigned long iop_tick_rate; unsigned long get_iop_tick_rate(void) { @@ -154,6 +147,7 @@ EXPORT_SYMBOL(get_iop_tick_rate); void __init iop_init_time(unsigned long tick_rate) { u32 timer_ctl; + int irq = IRQ_IOP32X_TIMER0; sched_clock_register(iop_read_sched_clock, 32, tick_rate); @@ -168,7 +162,9 @@ void __init iop_init_time(unsigned long tick_rate) */ write_tmr0(timer_ctl & ~IOP_TMR_EN); write_tisr(1); - setup_irq(IRQ_IOP32X_TIMER0, &iop_timer_irq); + if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + "IOP Timer Tick", &iop_clockevent)) + pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq); iop_clockevent.cpumask = cpumask_of(0); clockevents_config_and_register(&iop_clockevent, tick_rate, 0xf, 0xfffffffe); diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index c65cfc1ad99b..049a65f47b42 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -175,13 +175,6 @@ static void __init timer_config(void) __raw_writel(0x2, mmp_timer_base + TMR_CER); } -static struct irqaction timer_irq = { - .name = "timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = timer_interrupt, - .dev_id = &ckevt, -}; - void __init mmp_timer_init(int irq, unsigned long rate) { timer_config(); @@ -190,7 +183,9 @@ void __init mmp_timer_init(int irq, unsigned long rate) ckevt.cpumask = cpumask_of(0); - setup_irq(irq, &timer_irq); + if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + "timer", &ckevt)) + pr_err("Failed to request irq %d (timer)\n", irq); clocksource_register_hz(&cksrc, rate); clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA); diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index a2aa7a12b374..8d32894ecd2e 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -17,6 +17,8 @@ #include <linux/input.h> #include <linux/interrupt.h> #include <linux/leds.h> +#include <linux/mtd/nand-gpio.h> +#include <linux/mtd/partitions.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> #include <linux/regulator/fixed.h> @@ -294,9 +296,42 @@ struct modem_private_data { static struct modem_private_data modem_priv; +/* + * Define partitions for flash device + */ + +static struct mtd_partition partition_info[] = { + { .name = "Kernel", + .offset = 0, + .size = 3 * SZ_1M + SZ_512K }, + { .name = "u-boot", + .offset = 3 * SZ_1M + SZ_512K, + .size = SZ_256K }, + { .name = "u-boot params", + .offset = 3 * SZ_1M + SZ_512K + SZ_256K, + .size = SZ_256K }, + { .name = "Amstrad LDR", + .offset = 4 * SZ_1M, + .size = SZ_256K }, + { .name = "File system", + .offset = 4 * SZ_1M + 1 * SZ_256K, + .size = 27 * SZ_1M }, + { .name = "PBL reserved", + .offset = 32 * SZ_1M - 3 * SZ_256K, + .size = 3 * SZ_256K }, +}; + +static struct gpio_nand_platdata nand_platdata = { + .parts = partition_info, + .num_parts = ARRAY_SIZE(partition_info), +}; + static struct platform_device ams_delta_nand_device = { .name = "ams-delta-nand", .id = -1, + .dev = { + .platform_data = &nand_platdata, + }, }; #define OMAP_GPIO_LABEL "gpio-0-15" @@ -306,10 +341,14 @@ static struct gpiod_lookup_table ams_delta_nand_gpio_table = { .table = { GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_NAND_RB, "rdy", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NCE, "nce", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NRE, "nre", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWP, "nwp", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NCE, "nce", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NRE, "nre", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWP, "nwp", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", + GPIO_ACTIVE_LOW), GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0), GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0), GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 0, "data", 0, 0), diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index d068958d6f8a..2c1e2b32b9b3 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) return IRQ_HANDLED; } -static struct irqaction omap_wakeup_irq = { - .name = "peripheral wakeup", - .handler = omap_wakeup_interrupt -}; - static const struct platform_suspend_ops omap_pm_ops = { @@ -613,6 +608,7 @@ static const struct platform_suspend_ops omap_pm_ops = { static int __init omap_pm_init(void) { int error = 0; + int irq; if (!cpu_class_is_omap1()) return -ENODEV; @@ -656,9 +652,12 @@ static int __init omap_pm_init(void) arm_pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) - setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); + irq = INT_7XX_WAKE_UP_REQ; else if (cpu_is_omap16xx()) - setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + irq = INT_1610_WAKE_UP_REQ; + if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", + NULL)) + pr_err("Failed to request irq %d (peripheral wakeup)\n", irq); /* Program new power ramp-up time * (0 for most boards since we don't lower voltage when in deep sleep) diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 524977a31a49..de590a85a42b 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction omap_mpu_timer1_irq = { - .name = "mpu_timer1", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = omap_mpu_timer1_interrupt, -}; - static __init void omap_init_mpu_timer(unsigned long rate) { - setup_irq(INT_TIMER1, &omap_mpu_timer1_irq); + if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL)) + pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1); omap_mpu_timer_start(0, (rate / HZ) - 1, 1); clockevent_mpu_timer1.cpumask = cpumask_of(0); diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 0ae6c52a7d70..780fdf03c3ce 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction omap_32k_timer_irq = { - .name = "32KHz timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = omap_32k_timer_interrupt, -}; - static __init void omap_init_32k_timer(void) { - setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); + if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL)) + pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER); clockevent_32k_timer.cpumask = cpumask_of(0); clockevents_config_and_register(&clockevent_32k_timer, diff --git a/arch/arm/mach-omap2/.gitignore b/arch/arm/mach-omap2/.gitignore index 79a8d6ea7152..dc7be7556736 100644 --- a/arch/arm/mach-omap2/.gitignore +++ b/arch/arm/mach-omap2/.gitignore @@ -1 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only pm-asm-offsets.h diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 532a3e4b98c6..090a8aafb25e 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -109,6 +109,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, int index) { struct omap3_idle_statedata *cx = &omap3_idle_data[index]; + int error; if (omap_irq_pending() || need_resched()) goto return_sleep_time; @@ -125,8 +126,11 @@ static int omap3_enter_idle(struct cpuidle_device *dev, * Call idle CPU PM enter notifier chain so that * VFP context is saved. */ - if (cx->mpu_state == PWRDM_POWER_OFF) - cpu_pm_enter(); + if (cx->mpu_state == PWRDM_POWER_OFF) { + error = cpu_pm_enter(); + if (error) + goto out_clkdm_set; + } /* Execute ARM wfi */ omap_sram_idle(); @@ -139,6 +143,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF) cpu_pm_exit(); +out_clkdm_set: /* Re-allow idle for C1 */ if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE) clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]); diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index fe75d4fa6073..6f5f89711f25 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -122,6 +122,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, { struct idle_statedata *cx = state_ptr + index; u32 mpuss_can_lose_context = 0; + int error; /* * CPU0 has to wait and stay ON until CPU1 is OFF state. @@ -159,7 +160,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, * Call idle CPU PM enter notifier chain so that * VFP and per CPU interrupt context is saved. */ - cpu_pm_enter(); + error = cpu_pm_enter(); + if (error) + goto cpu_pm_out; if (dev->cpu == 0) { pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); @@ -169,13 +172,17 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, * Call idle CPU cluster PM enter notifier chain * to save GIC and wakeupgen context. */ - if (mpuss_can_lose_context) - cpu_cluster_pm_enter(); + if (mpuss_can_lose_context) { + error = cpu_cluster_pm_enter(); + if (error) + goto cpu_cluster_pm_out; + } } omap4_enter_lowpower(dev->cpu, cx->cpu_state); cpu_done[dev->cpu] = true; +cpu_cluster_pm_out: /* Wakeup CPU1 only if it is not offlined */ if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) { @@ -198,18 +205,19 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, } /* - * Call idle CPU PM exit notifier chain to restore - * VFP and per CPU IRQ context. - */ - cpu_pm_exit(); - - /* * Call idle CPU cluster PM exit notifier chain * to restore GIC and wakeupgen context. */ if (dev->cpu == 0 && mpuss_can_lose_context) cpu_cluster_pm_exit(); + /* + * Call idle CPU PM exit notifier chain to restore + * VFP and per CPU IRQ context. + */ + cpu_pm_exit(); + +cpu_pm_out: tick_broadcast_exit(); fail: diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index d00e3c72e37d..f70d561f37f7 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -5,7 +5,7 @@ * Copyright (C) 2011 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> - * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> + * Copyright (C) 2013 Pali Rohár <pali@kernel.org> */ #include <linux/arm-smccc.h> diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index ba8c486c0454..4aaa95706d39 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -5,7 +5,7 @@ * Copyright (C) 2011 Texas Instruments, Inc. * Santosh Shilimkar <santosh.shilimkar@ti.com> * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> - * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> + * Copyright (C) 2013 Pali Rohár <pali@kernel.org> */ #ifndef OMAP_ARCH_OMAP_SECURE_H #define OMAP_ARCH_OMAP_SECURE_H diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S index d4832845a4e8..7376f528034d 100644 --- a/arch/arm/mach-omap2/omap-smc.S +++ b/arch/arm/mach-omap2/omap-smc.S @@ -6,7 +6,7 @@ * Written by Santosh Shilimkar <santosh.shilimkar@ti.com> * * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> - * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> + * Copyright (C) 2013 Pali Rohár <pali@kernel.org> */ #include <linux/linkage.h> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 17d337ed18be..82706af307de 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3148,15 +3148,14 @@ static int omap_hwmod_check_sysc(struct device *dev, /** * omap_hwmod_init_regbits - init sysconfig specific register bits * @dev: struct device + * @oh: module * @data: module data * @sysc_fields: new sysc configuration */ -static int omap_hwmod_init_regbits(struct device *dev, +static int omap_hwmod_init_regbits(struct device *dev, struct omap_hwmod *oh, const struct ti_sysc_module_data *data, struct sysc_regbits **sysc_fields) { - *sysc_fields = NULL; - switch (data->cap->type) { case TI_SYSC_OMAP2: case TI_SYSC_OMAP2_TIMER: @@ -3191,6 +3190,12 @@ static int omap_hwmod_init_regbits(struct device *dev, *sysc_fields = &omap_hwmod_sysc_type_usb_host_fs; break; default: + *sysc_fields = NULL; + if (!oh->class->sysc->sysc_fields) + return 0; + + dev_err(dev, "sysc_fields not found\n"); + return -EINVAL; } @@ -3356,9 +3361,9 @@ static int omap_hwmod_check_module(struct device *dev, if (!oh->class->sysc) return -ENODEV; - if (sysc_fields != oh->class->sysc->sysc_fields) - dev_warn(dev, "sysc_fields %p != %p\n", sysc_fields, - oh->class->sysc->sysc_fields); + if (oh->class->sysc->sysc_fields && + sysc_fields != oh->class->sysc->sysc_fields) + dev_warn(dev, "sysc_fields mismatch\n"); if (rev_offs != oh->class->sysc->rev_offs) dev_warn(dev, "rev_offs %08x != %08x\n", rev_offs, @@ -3574,7 +3579,7 @@ int omap_hwmod_init_module(struct device *dev, cookie->data = oh; - error = omap_hwmod_init_regbits(dev, data, &sysc_fields); + error = omap_hwmod_init_regbits(dev, oh, data, &sysc_fields); if (error) return error; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 5ef76fe3f33d..fa2ff41f84b9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -24,16 +24,11 @@ extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup; extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr; extern struct omap_hwmod_ocp_if am33xx_mpu__prcm; extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main; -extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main; extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main; extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx; extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc; extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc; extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2; -extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc; -extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0; -extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1; -extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2; extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc; extern struct omap_hwmod am33xx_l3_main_hwmod; @@ -42,7 +37,6 @@ extern struct omap_hwmod am33xx_l3_instr_hwmod; extern struct omap_hwmod am33xx_l4_ls_hwmod; extern struct omap_hwmod am33xx_l4_wkup_hwmod; extern struct omap_hwmod am33xx_mpu_hwmod; -extern struct omap_hwmod am33xx_pruss_hwmod; extern struct omap_hwmod am33xx_gfx_hwmod; extern struct omap_hwmod am33xx_prcm_hwmod; extern struct omap_hwmod am33xx_ocmcram_hwmod; @@ -52,10 +46,6 @@ extern struct omap_hwmod am33xx_gpmc_hwmod; extern struct omap_hwmod am33xx_rtc_hwmod; extern struct omap_hwmod am33xx_timer1_hwmod; extern struct omap_hwmod am33xx_timer2_hwmod; -extern struct omap_hwmod am33xx_tpcc_hwmod; -extern struct omap_hwmod am33xx_tptc0_hwmod; -extern struct omap_hwmod am33xx_tptc1_hwmod; -extern struct omap_hwmod am33xx_tptc2_hwmod; extern struct omap_hwmod_class am33xx_emif_hwmod_class; extern struct omap_hwmod_class am33xx_l4_hwmod_class; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index ac7d5bb1a02f..0ebbfbb4fb1c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -74,14 +74,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* pru-icss -> l3 main */ -struct omap_hwmod_ocp_if am33xx_pruss__l3_main = { - .master = &am33xx_pruss_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* gfx -> l3 main */ struct omap_hwmod_ocp_if am33xx_gfx__l3_main = { .master = &am33xx_gfx_hwmod, @@ -122,38 +114,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = { .user = OCP_USER_MPU, }; -/* l3 main -> tpcc */ -struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tpcc_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc0 */ -struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tptc0_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc1 */ -struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tptc1_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc2 */ -struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tptc2_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU, -}; - /* l3 main -> ocmc */ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { .master = &am33xx_l3_main_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 78ec1bc8e3a1..dca5a3a7b97c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -133,34 +133,6 @@ struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = { .name = "wkup_m3", }; -/* - * 'pru-icss' class - * Programmable Real-Time Unit and Industrial Communication Subsystem - */ -static struct omap_hwmod_class am33xx_pruss_hwmod_class = { - .name = "pruss", -}; - -static struct omap_hwmod_rst_info am33xx_pruss_resets[] = { - { .name = "pruss", .rst_shift = 1 }, -}; - -/* pru-icss */ -/* Pseudo hwmod for reset control purpose only */ -struct omap_hwmod am33xx_pruss_hwmod = { - .name = "pruss", - .class = &am33xx_pruss_hwmod_class, - .clkdm_name = "pruss_ocp_clkdm", - .main_clk = "pruss_ocp_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .rst_lines = am33xx_pruss_resets, - .rst_lines_cnt = ARRAY_SIZE(am33xx_pruss_resets), -}; - /* gfx */ /* Pseudo hwmod for reset control purpose only */ static struct omap_hwmod_class am33xx_gfx_hwmod_class = { @@ -393,80 +365,6 @@ struct omap_hwmod am33xx_timer2_hwmod = { }, }; -/* tpcc */ -static struct omap_hwmod_class am33xx_tpcc_hwmod_class = { - .name = "tpcc", -}; - -struct omap_hwmod am33xx_tpcc_hwmod = { - .name = "tpcc", - .class = &am33xx_tpcc_hwmod_class, - .clkdm_name = "l3_clkdm", - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -/* 'tptc' class */ -static struct omap_hwmod_class am33xx_tptc_hwmod_class = { - .name = "tptc", - .sysc = &am33xx_tptc_sysc, -}; - -/* tptc0 */ -struct omap_hwmod am33xx_tptc0_hwmod = { - .name = "tptc0", - .class = &am33xx_tptc_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* tptc1 */ -struct omap_hwmod am33xx_tptc1_hwmod = { - .name = "tptc1", - .class = &am33xx_tptc_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* tptc2 */ -struct omap_hwmod am33xx_tptc2_hwmod = { - .name = "tptc2", - .class = &am33xx_tptc_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - static void omap_hwmod_am33xx_clkctrl(void) { CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET); @@ -481,12 +379,7 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tpcc_hwmod, AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc0_hwmod, AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc1_hwmod, AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc2_hwmod, AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET); - CLKCTRL(am33xx_pruss_hwmod, AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET); CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); @@ -494,7 +387,6 @@ static void omap_hwmod_am33xx_clkctrl(void) static void omap_hwmod_am33xx_rst(void) { - RSTCTRL(am33xx_pruss_hwmod, AM33XX_RM_PER_RSTCTRL_OFFSET); RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET); RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET); } @@ -518,12 +410,7 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tpcc_hwmod, AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc0_hwmod, AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc1_hwmod, AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc2_hwmod, AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET); - CLKCTRL(am33xx_pruss_hwmod, AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET); CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); @@ -531,9 +418,7 @@ static void omap_hwmod_am43xx_clkctrl(void) static void omap_hwmod_am43xx_rst(void) { - RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET); RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET); - RSTST(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTST_OFFSET); RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET); } diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index f1ea8c604595..c64b735c8acc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -233,14 +233,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4 hs -> pru-icss */ -static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = { - .master = &am33xx_l4_hs_hwmod, - .slave = &am33xx_pruss_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main -> debugss */ static struct omap_hwmod_ocp_if am33xx_l3_main__debugss = { .master = &am33xx_l3_main_hwmod, @@ -292,7 +284,6 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__l3_instr, &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, - &am33xx_pruss__l3_main, &am33xx_wkup_m3__l4_wkup, &am33xx_gfx__l3_main, &am33xx_l3_main__debugss, @@ -302,13 +293,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__smartreflex1, &am33xx_l4_wkup__timer1, &am33xx_l4_wkup__rtc, - &am33xx_l4_hs__pruss, &am33xx_l4_ls__timer2, - &am33xx_l3_main__tpcc, &am33xx_l3_s__gpmc, - &am33xx_l3_main__tptc0, - &am33xx_l3_main__tptc1, - &am33xx_l3_main__tptc2, &am33xx_l3_main__ocmc, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index d0867dbd788e..d2203f44af88 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -156,75 +156,6 @@ static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = { }, }; -/* dss */ - -static struct omap_hwmod am43xx_dss_core_hwmod = { - .name = "dss_core", - .class = &omap2_dss_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "disp_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* dispc */ - -static struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = { - .manager_count = 1, - .has_framedonetv_irq = 0 -}; - -static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am43xx_dispc_hwmod_class = { - .name = "dispc", - .sysc = &am43xx_dispc_sysc, -}; - -static struct omap_hwmod am43xx_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &am43xx_dispc_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "disp_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, - }, - }, - .dev_attr = &am43xx_dss_dispc_dev_attr, - .parent_hwmod = &am43xx_dss_core_hwmod, -}; - -/* rfbi */ - -static struct omap_hwmod am43xx_dss_rfbi_hwmod = { - .name = "dss_rfbi", - .class = &omap2_rfbi_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "disp_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, - }, - }, - .parent_hwmod = &am43xx_dss_core_hwmod, -}; - - /* Interfaces */ static struct omap_hwmod_ocp_if am43xx_l3_main__emif = { .master = &am33xx_l3_main_hwmod, @@ -254,13 +185,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__wkup_m3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if am43xx_l3_main__pruss = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_pruss_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex0 = { .master = &am33xx_l4_wkup_hwmod, .slave = &am33xx_smartreflex0_hwmod, @@ -310,37 +234,8 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if am43xx_dss__l3_main = { - .master = &am43xx_dss_core_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_dss_core_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_dss_dispc_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_dss_rfbi_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__synctimer, - &am43xx_l3_main__pruss, &am33xx_mpu__l3_main, &am33xx_mpu__prcm, &am33xx_l3_s__l4_ls, @@ -351,7 +246,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, &am43xx_l3_main__emif, - &am33xx_pruss__l3_main, &am43xx_wkup_m3__l4_wkup, &am33xx_gfx__l3_main, &am43xx_l4_wkup__wkup_m3, @@ -360,18 +254,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__smartreflex1, &am43xx_l4_wkup__timer1, &am33xx_l4_ls__timer2, - &am33xx_l3_main__tpcc, &am33xx_l3_s__gpmc, - &am33xx_l3_main__tptc0, - &am33xx_l3_main__tptc1, - &am33xx_l3_main__tptc2, &am33xx_l3_main__ocmc, &am43xx_l3_s__usbotgss0, &am43xx_l3_s__usbotgss1, - &am43xx_dss__l3_main, - &am43xx_l4_ls__dss, - &am43xx_l4_ls__dss_dispc, - &am43xx_l4_ls__dss_rfbi, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b7c51ea8c9a6..33f6596c03f7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -356,306 +356,6 @@ static struct omap_hwmod omap44xx_debugss_hwmod = { }; /* - * 'dsp' class - * dsp sub-system - */ - -static struct omap_hwmod_class omap44xx_dsp_hwmod_class = { - .name = "dsp", -}; - -/* dsp */ -static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = { - { .name = "dsp", .rst_shift = 0 }, -}; - -static struct omap_hwmod omap44xx_dsp_hwmod = { - .name = "dsp", - .class = &omap44xx_dsp_hwmod_class, - .clkdm_name = "tesla_clkdm", - .rst_lines = omap44xx_dsp_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_resets), - .main_clk = "dpll_iva_m4x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET, - .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET, - .context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'dss' class - * display sub-system - */ - -static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = { - .rev_offs = 0x0000, - .syss_offs = 0x0014, - .sysc_flags = SYSS_HAS_RESET_STATUS, -}; - -static struct omap_hwmod_class omap44xx_dss_hwmod_class = { - .name = "dss", - .sysc = &omap44xx_dss_sysc, - .reset = omap_dss_reset, -}; - -/* dss */ -static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_hwmod = { - .name = "dss_core", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .class = &omap44xx_dss_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = dss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), -}; - -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap44xx_dispc_sysc, -}; - -/* dss_dispc */ -static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = { - .manager_count = 3, - .has_framedonetv_irq = 1 -}; - -static struct omap_hwmod omap44xx_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &omap44xx_dispc_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .dev_attr = &omap44xx_dss_dispc_dev_attr, - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* - * 'dsi' class - * display serial interface controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_dsi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_dsi_hwmod_class = { - .name = "dsi", - .sysc = &omap44xx_dsi_sysc, -}; - -/* dss_dsi1 */ -static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { - .name = "dss_dsi1", - .class = &omap44xx_dsi_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .opt_clks = dss_dsi1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* dss_dsi2 */ -static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { - .name = "dss_dsi2", - .class = &omap44xx_dsi_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .opt_clks = dss_dsi2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks), - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* - * 'hdmi' class - * hdmi controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_hdmi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_hdmi_hwmod_class = { - .name = "hdmi", - .sysc = &omap44xx_hdmi_sysc, -}; - -/* dss_hdmi */ -static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { - .name = "dss_hdmi", - .class = &omap44xx_hdmi_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - /* - * HDMI audio requires to use no-idle mode. Hence, - * set idle mode by software. - */ - .flags = HWMOD_SWSUP_SIDLE | HWMOD_OPT_CLKS_NEEDED, - .main_clk = "dss_48mhz_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .opt_clks = dss_hdmi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* - * 'rfbi' class - * remote frame buffer interface - */ - -static struct omap_hwmod_class_sysconfig omap44xx_rfbi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_rfbi_hwmod_class = { - .name = "rfbi", - .sysc = &omap44xx_rfbi_sysc, -}; - -/* dss_rfbi */ -static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { - { .role = "ick", .clk = "l3_div_ck" }, -}; - -static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { - .name = "dss_rfbi", - .class = &omap44xx_rfbi_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .opt_clks = dss_rfbi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* - * 'venc' class - * video encoder - */ - -static struct omap_hwmod_class omap44xx_venc_hwmod_class = { - .name = "venc", -}; - -/* dss_venc */ -static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = { - { .role = "tv_clk", .clk = "dss_tv_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_venc_hwmod = { - .name = "dss_venc", - .class = &omap44xx_venc_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_tv_clk", - .flags = HWMOD_OPT_CLKS_NEEDED, - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .parent_hwmod = &omap44xx_dss_hwmod, - .opt_clks = dss_venc_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks), -}; - - - -/* * 'emif' class * external memory interface no1 */ @@ -737,39 +437,6 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = { }, }; - -/* - * 'ipu' class - * imaging processor unit - */ - -static struct omap_hwmod_class omap44xx_ipu_hwmod_class = { - .name = "ipu", -}; - -/* ipu */ -static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = { - { .name = "cpu0", .rst_shift = 0 }, - { .name = "cpu1", .rst_shift = 1 }, -}; - -static struct omap_hwmod omap44xx_ipu_hwmod = { - .name = "ipu", - .class = &omap44xx_ipu_hwmod_class, - .clkdm_name = "ducati_clkdm", - .rst_lines = omap44xx_ipu_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_resets), - .main_clk = "ducati_clk_mux_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET, - .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, - .context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - /* * 'iss' class * external images sensor pixel data processor @@ -1236,22 +903,6 @@ static struct omap_hwmod_ocp_if omap44xx_ocp_wp_noc__l3_instr = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* dsp -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = { - .master = &omap44xx_dss_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> l3_main_1 */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = { .master = &omap44xx_l3_main_2_hwmod, @@ -1284,14 +935,6 @@ static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* ipu -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = { - .master = &omap44xx_ipu_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* iss -> l3_main_2 */ static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = { .master = &omap44xx_iss_hwmod, @@ -1364,14 +1007,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* dsp -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l4_abe */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = { .master = &omap44xx_l3_main_1_hwmod, @@ -1476,142 +1111,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* dsp -> iva */ -static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_iva_hwmod, - .clk = "dpll_iva_m5x2_ck", - .user = OCP_USER_DSP, -}; - -/* dsp -> sl2if */ -static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_sl2if_hwmod, - .clk = "dpll_iva_m5x2_ck", - .user = OCP_USER_DSP, -}; - -/* l4_cfg -> dsp */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_dsp_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_dispc */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_dispc_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_dispc */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_dispc_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_dsi1 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_dsi1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_dsi1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_dsi1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_dsi2 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_dsi2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_dsi2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_dsi2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_hdmi */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_hdmi_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_hdmi */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_hdmi_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_rfbi_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_rfbi_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_venc */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_venc_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_venc */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_venc_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - /* l3_main_2 -> gpmc */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = { .master = &omap44xx_l3_main_2_hwmod, @@ -1620,14 +1119,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_2 -> ipu */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_ipu_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> iss */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { .master = &omap44xx_l3_main_2_hwmod, @@ -1762,13 +1253,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_iva__l3_instr, &omap44xx_l3_main_3__l3_instr, &omap44xx_ocp_wp_noc__l3_instr, - &omap44xx_dsp__l3_main_1, - &omap44xx_dss__l3_main_1, &omap44xx_l3_main_2__l3_main_1, &omap44xx_l4_cfg__l3_main_1, &omap44xx_mpu__l3_main_1, &omap44xx_debugss__l3_main_2, - &omap44xx_ipu__l3_main_2, &omap44xx_iss__l3_main_2, &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, @@ -1778,7 +1266,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - &omap44xx_dsp__l4_abe, &omap44xx_l3_main_1__l4_abe, &omap44xx_mpu__l4_abe, &omap44xx_l3_main_1__l4_cfg, @@ -1792,25 +1279,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_wkup__ctrl_module_wkup, &omap44xx_l4_wkup__ctrl_module_pad_wkup, &omap44xx_l3_instr__debugss, - &omap44xx_dsp__iva, - /* &omap44xx_dsp__sl2if, */ - &omap44xx_l4_cfg__dsp, - &omap44xx_l3_main_2__dss, - &omap44xx_l4_per__dss, - &omap44xx_l3_main_2__dss_dispc, - &omap44xx_l4_per__dss_dispc, - &omap44xx_l3_main_2__dss_dsi1, - &omap44xx_l4_per__dss_dsi1, - &omap44xx_l3_main_2__dss_dsi2, - &omap44xx_l4_per__dss_dsi2, - &omap44xx_l3_main_2__dss_hdmi, - &omap44xx_l4_per__dss_hdmi, - &omap44xx_l3_main_2__dss_rfbi, - &omap44xx_l4_per__dss_rfbi, - &omap44xx_l3_main_2__dss_venc, - &omap44xx_l4_per__dss_venc, &omap44xx_l3_main_2__gpmc, - &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index ad398f6bc011..08f34f4732fd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -227,240 +227,6 @@ static struct omap_hwmod omap54xx_counter_32k_hwmod = { }; /* - * 'dss' class - * display sub-system - */ -static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = { - .rev_offs = 0x0000, - .syss_offs = 0x0014, - .sysc_flags = SYSS_HAS_RESET_STATUS, -}; - -static struct omap_hwmod_class omap54xx_dss_hwmod_class = { - .name = "dss", - .sysc = &omap54xx_dss_sysc, - .reset = omap_dss_reset, -}; - -/* dss */ -static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "32khz_clk", .clk = "dss_32khz_clk" }, - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - -static struct omap_hwmod omap54xx_dss_hwmod = { - .name = "dss_core", - .class = &omap54xx_dss_hwmod_class, - .clkdm_name = "dss_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = dss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), -}; - -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap54xx_dispc_sysc, -}; - -/* dss_dispc */ -static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -/* dss_dispc dev_attr */ -static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = { - .has_framedonetv_irq = 1, - .manager_count = 4, -}; - -static struct omap_hwmod omap54xx_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &omap54xx_dispc_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_dispc_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), - .dev_attr = &dss_dispc_dev_attr, - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* - * 'dsi1' class - * display serial interface controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = { - .name = "dsi1", - .sysc = &omap54xx_dsi1_sysc, -}; - -/* dss_dsi1_a */ -static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = { - .name = "dss_dsi1", - .class = &omap54xx_dsi1_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_dsi1_a_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks), - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* dss_dsi1_c */ -static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = { - .name = "dss_dsi2", - .class = &omap54xx_dsi1_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_dsi1_c_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks), - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* - * 'hdmi' class - * hdmi controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = { - .name = "hdmi", - .sysc = &omap54xx_hdmi_sysc, -}; - -static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap54xx_dss_hdmi_hwmod = { - .name = "dss_hdmi", - .class = &omap54xx_hdmi_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_48mhz_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_hdmi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* - * 'rfbi' class - * remote frame buffer interface - */ - -static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = { - .name = "rfbi", - .sysc = &omap54xx_rfbi_sysc, -}; - -/* dss_rfbi */ -static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { - { .role = "ick", .clk = "l3_iclk_div" }, -}; - -static struct omap_hwmod omap54xx_dss_rfbi_hwmod = { - .name = "dss_rfbi", - .class = &omap54xx_rfbi_hwmod_class, - .clkdm_name = "dss_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_rfbi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* * 'emif' class * external memory interface no1 (wrapper) */ @@ -908,54 +674,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_2 -> dss */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_dispc */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_dispc_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_dsi1_a */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_dsi1_a_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_dsi1_c */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_dsi1_c_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_hdmi */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_hdmi_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_rfbi_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* mpu -> emif1 */ static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = { .master = &omap54xx_mpu_hwmod, @@ -1030,12 +748,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_1__l4_wkup, &omap54xx_mpu__mpu_private, &omap54xx_l4_wkup__counter_32k, - &omap54xx_l3_main_2__dss, - &omap54xx_l3_main_2__dss_dispc, - &omap54xx_l3_main_2__dss_dsi1_a, - &omap54xx_l3_main_2__dss_dsi1_c, - &omap54xx_l3_main_2__dss_hdmi, - &omap54xx_l3_main_2__dss_rfbi, &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, &omap54xx_l4_cfg__mpu, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index acef3733db4c..e95668bdbc3f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -277,203 +277,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = { }; /* - * 'tpcc' class - * - */ -static struct omap_hwmod_class dra7xx_tpcc_hwmod_class = { - .name = "tpcc", -}; - -static struct omap_hwmod dra7xx_tpcc_hwmod = { - .name = "tpcc", - .class = &dra7xx_tpcc_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'tptc' class - * - */ -static struct omap_hwmod_class dra7xx_tptc_hwmod_class = { - .name = "tptc", -}; - -/* tptc0 */ -static struct omap_hwmod dra7xx_tptc0_hwmod = { - .name = "tptc0", - .class = &dra7xx_tptc_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* tptc1 */ -static struct omap_hwmod dra7xx_tptc1_hwmod = { - .name = "tptc1", - .class = &dra7xx_tptc_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'dss' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_dss_sysc = { - .rev_offs = 0x0000, - .syss_offs = 0x0014, - .sysc_flags = SYSS_HAS_RESET_STATUS, -}; - -static struct omap_hwmod_class dra7xx_dss_hwmod_class = { - .name = "dss", - .sysc = &dra7xx_dss_sysc, - .reset = omap_dss_reset, -}; - -/* dss */ -static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "dss_clk", .clk = "dss_dss_clk" }, - { .role = "hdmi_phy_clk", .clk = "dss_48mhz_clk" }, - { .role = "32khz_clk", .clk = "dss_32khz_clk" }, - { .role = "video2_clk", .clk = "dss_video2_clk" }, - { .role = "video1_clk", .clk = "dss_video1_clk" }, - { .role = "hdmi_clk", .clk = "dss_hdmi_clk" }, - { .role = "hdcp_clk", .clk = "dss_deshdcp_clk" }, -}; - -static struct omap_hwmod dra7xx_dss_hwmod = { - .name = "dss_core", - .class = &dra7xx_dss_hwmod_class, - .clkdm_name = "dss_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_DSS_DSS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = dss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), -}; - -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig dra7xx_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_dispc_hwmod_class = { - .name = "dispc", - .sysc = &dra7xx_dispc_sysc, -}; - -/* dss_dispc */ -/* dss_dispc dev_attr */ -static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = { - .has_framedonetv_irq = 1, - .manager_count = 4, -}; - -static struct omap_hwmod dra7xx_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &dra7xx_dispc_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .dev_attr = &dss_dispc_dev_attr, - .parent_hwmod = &dra7xx_dss_hwmod, -}; - -/* - * 'hdmi' class - * hdmi controller - */ - -static struct omap_hwmod_class_sysconfig dra7xx_hdmi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_hdmi_hwmod_class = { - .name = "hdmi", - .sysc = &dra7xx_hdmi_sysc, -}; - -/* dss_hdmi */ - -static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_hdmi_clk" }, -}; - -static struct omap_hwmod dra7xx_dss_hdmi_hwmod = { - .name = "dss_hdmi", - .class = &dra7xx_hdmi_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_48mhz_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_hdmi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), - .parent_hwmod = &dra7xx_dss_hwmod, -}; - - - - - -/* * 'gpmc' class * */ @@ -1077,54 +880,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> tpcc */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_tpcc_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> tptc0 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc0 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_tptc0_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> tptc1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_tptc1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> dss */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dss = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_dss_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> dispc */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dispc = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_dss_dispc_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> dispc */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_dss_hdmi_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> gpmc */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { .master = &dra7xx_l3_main_1_hwmod, @@ -1309,12 +1064,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__bb2d, &dra7xx_l4_wkup__counter_32k, &dra7xx_l4_wkup__ctrl_module_wkup, - &dra7xx_l3_main_1__tpcc, - &dra7xx_l3_main_1__tptc0, - &dra7xx_l3_main_1__tptc1, - &dra7xx_l3_main_1__dss, - &dra7xx_l3_main_1__dispc, - &dra7xx_l3_main_1__hdmi, &dra7xx_l3_main_1__gpmc, &dra7xx_l4_cfg__mpu, &dra7xx_l3_main_1__pciess1, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 83230d9ce5ed..6a9f1ad9d413 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -129,13 +129,6 @@ static struct omap_hwmod dm81xx_alwon_l3_med_hwmod = { .flags = HWMOD_NO_IDLEST, }; -static struct omap_hwmod dm81xx_alwon_l3_fast_hwmod = { - .name = "l3_fast", - .clkdm_name = "alwon_l3_fast_clkdm", - .class = &l3_hwmod_class, - .flags = HWMOD_NO_IDLEST, -}; - /* * L4 standard peripherals, see TRM table 1-12 for devices using this. * See TRM table 1-73 for devices using the 125MHz SYSCLK6 clock. @@ -867,62 +860,6 @@ static struct omap_hwmod_ocp_if dm816x_l4_ls__timer7 = { .user = OCP_USER_MPU, }; -/* CPSW on dm814x */ -static struct omap_hwmod_class_sysconfig dm814x_cpgmac_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x8, - .syss_offs = 0x4, - .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSS_HAS_RESET_STATUS, - .idlemodes = SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE | - MSTANDBY_NO, - .sysc_fields = &omap_hwmod_sysc_type3, -}; - -static struct omap_hwmod_class dm814x_cpgmac0_hwmod_class = { - .name = "cpgmac0", - .sysc = &dm814x_cpgmac_sysc, -}; - -static struct omap_hwmod dm814x_cpgmac0_hwmod = { - .name = "cpgmac0", - .class = &dm814x_cpgmac0_hwmod_class, - .clkdm_name = "alwon_ethernet_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "cpsw_125mhz_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_class dm814x_mdio_hwmod_class = { - .name = "davinci_mdio", -}; - -static struct omap_hwmod dm814x_mdio_hwmod = { - .name = "davinci_mdio", - .class = &dm814x_mdio_hwmod_class, - .clkdm_name = "alwon_ethernet_clkdm", - .main_clk = "cpsw_125mhz_gclk", -}; - -static struct omap_hwmod_ocp_if dm814x_l4_hs__cpgmac0 = { - .master = &dm81xx_l4_hs_hwmod, - .slave = &dm814x_cpgmac0_hwmod, - .clk = "cpsw_125mhz_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm814x_cpgmac0__mdio = { - .master = &dm814x_cpgmac0_hwmod, - .slave = &dm814x_mdio_hwmod, - .user = OCP_USER_MPU, - .flags = HWMOD_NO_IDLEST, -}; - /* EMAC Ethernet */ static struct omap_hwmod_class_sysconfig dm816x_emac_sysc = { .rev_offs = 0x0, @@ -1321,154 +1258,6 @@ static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = { - .name = "tpcc", -}; - -static struct omap_hwmod dm81xx_tpcc_hwmod = { - .name = "tpcc", - .class = &dm81xx_tpcc_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPCC_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tpcc = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tpcc_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_class dm81xx_tptc0_hwmod_class = { - .name = "tptc0", -}; - -static struct omap_hwmod dm81xx_tptc0_hwmod = { - .name = "tptc0", - .class = &dm81xx_tptc0_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPTC0_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc0 = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tptc0_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm81xx_tptc0__alwon_l3_fast = { - .master = &dm81xx_tptc0_hwmod, - .slave = &dm81xx_alwon_l3_fast_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_class dm81xx_tptc1_hwmod_class = { - .name = "tptc1", -}; - -static struct omap_hwmod dm81xx_tptc1_hwmod = { - .name = "tptc1", - .class = &dm81xx_tptc1_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPTC1_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc1 = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tptc1_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm81xx_tptc1__alwon_l3_fast = { - .master = &dm81xx_tptc1_hwmod, - .slave = &dm81xx_alwon_l3_fast_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_class dm81xx_tptc2_hwmod_class = { - .name = "tptc2", -}; - -static struct omap_hwmod dm81xx_tptc2_hwmod = { - .name = "tptc2", - .class = &dm81xx_tptc2_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPTC2_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc2 = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tptc2_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm81xx_tptc2__alwon_l3_fast = { - .master = &dm81xx_tptc2_hwmod, - .slave = &dm81xx_alwon_l3_fast_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_class dm81xx_tptc3_hwmod_class = { - .name = "tptc3", -}; - -static struct omap_hwmod dm81xx_tptc3_hwmod = { - .name = "tptc3", - .class = &dm81xx_tptc3_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPTC3_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc3 = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tptc3_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = { - .master = &dm81xx_tptc3_hwmod, - .slave = &dm81xx_alwon_l3_fast_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - /* * REVISIT: Test and enable the following once clocks work: * dm81xx_l4_ls__mailbox @@ -1499,19 +1288,8 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm814x_l4_ls__mmc1, &dm814x_l4_ls__mmc2, &ti81xx_l4_ls__rtc, - &dm81xx_alwon_l3_fast__tpcc, - &dm81xx_alwon_l3_fast__tptc0, - &dm81xx_alwon_l3_fast__tptc1, - &dm81xx_alwon_l3_fast__tptc2, - &dm81xx_alwon_l3_fast__tptc3, - &dm81xx_tptc0__alwon_l3_fast, - &dm81xx_tptc1__alwon_l3_fast, - &dm81xx_tptc2__alwon_l3_fast, - &dm81xx_tptc3__alwon_l3_fast, &dm814x_l4_ls__timer1, &dm814x_l4_ls__timer2, - &dm814x_l4_hs__cpgmac0, - &dm814x_cpgmac0__mdio, &dm81xx_alwon_l3_slow__gpmc, &dm814x_default_l3_slow__usbss, &dm814x_alwon_l3_med__mmc3, @@ -1554,15 +1332,6 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm81xx_emac0__mdio, &dm816x_l4_hs__emac1, &dm81xx_l4_hs__sata, - &dm81xx_alwon_l3_fast__tpcc, - &dm81xx_alwon_l3_fast__tptc0, - &dm81xx_alwon_l3_fast__tptc1, - &dm81xx_alwon_l3_fast__tptc2, - &dm81xx_alwon_l3_fast__tptc3, - &dm81xx_tptc0__alwon_l3_fast, - &dm81xx_tptc1__alwon_l3_fast, - &dm81xx_tptc2__alwon_l3_fast, - &dm81xx_tptc3__alwon_l3_fast, &dm81xx_alwon_l3_slow__gpmc, &dm816x_default_l3_slow__usbss, NULL, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index dbb7c2acef31..2a4fe3e68b82 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -397,10 +397,16 @@ static int ti_sysc_shutdown_module(struct device *dev, return omap_hwmod_shutdown(cookie->data); } +static bool ti_sysc_soc_type_gp(void) +{ + return omap_type() == OMAP2_DEVICE_TYPE_GP; +} + static struct of_dev_auxdata omap_auxdata_lookup[]; static struct ti_sysc_platform_data ti_sysc_pdata = { .auxdata = omap_auxdata_lookup, + .soc_type_gp = ti_sysc_soc_type_gp, .init_clockdomain = ti_sysc_clkdm_init, .clkdm_deny_idle = ti_sysc_clkdm_deny_idle, .clkdm_allow_idle = ti_sysc_clkdm_allow_idle, diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 7461b0346549..5455fc98c60e 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -6,11 +6,14 @@ * Dave Gerlach */ +#include <linux/cpuidle.h> +#include <linux/platform_data/pm33xx.h> +#include <asm/cpuidle.h> #include <asm/smp_scu.h> #include <asm/suspend.h> #include <linux/errno.h> -#include <linux/platform_data/pm33xx.h> #include <linux/clk.h> +#include <linux/cpu.h> #include <linux/platform_data/gpio-omap.h> #include <linux/pinctrl/pinmux.h> #include <linux/wkup_m3_ipc.h> @@ -35,6 +38,14 @@ static struct clockdomain *gfx_l4ls_clkdm; static void __iomem *scu_base; static struct omap_hwmod *rtc_oh; +static int (*idle_fn)(u32 wfi_flags); + +struct amx3_idle_state { + int wfi_flags; +}; + +static struct amx3_idle_state *idle_states; + static int am43xx_map_scu(void) { scu_base = ioremap(scu_a9_get_base(), SZ_256); @@ -68,7 +79,7 @@ static int am43xx_check_off_mode_enable(void) return 0; } -static int amx3_common_init(void) +static int amx3_common_init(int (*idle)(u32 wfi_flags)) { gfx_pwrdm = pwrdm_lookup("gfx_pwrdm"); per_pwrdm = pwrdm_lookup("per_pwrdm"); @@ -88,10 +99,12 @@ static int amx3_common_init(void) else omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF); + idle_fn = idle; + return 0; } -static int am33xx_suspend_init(void) +static int am33xx_suspend_init(int (*idle)(u32 wfi_flags)) { int ret; @@ -102,12 +115,12 @@ static int am33xx_suspend_init(void) return -ENODEV; } - ret = amx3_common_init(); + ret = amx3_common_init(idle); return ret; } -static int am43xx_suspend_init(void) +static int am43xx_suspend_init(int (*idle)(u32 wfi_flags)) { int ret = 0; @@ -117,11 +130,17 @@ static int am43xx_suspend_init(void) return ret; } - ret = amx3_common_init(); + ret = amx3_common_init(idle); return ret; } +static int amx3_suspend_deinit(void) +{ + idle_fn = NULL; + return 0; +} + static void amx3_pre_suspend_common(void) { omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF); @@ -201,6 +220,43 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long), return ret; } +static int am33xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args) +{ + int ret = 0; + + if (omap_irq_pending() || need_resched()) + return ret; + + ret = cpu_suspend(args, fn); + + return ret; +} + +static int am43xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args) +{ + int ret = 0; + + if (!scu_base) + return 0; + + scu_power_mode(scu_base, SCU_PM_DORMANT); + ret = cpu_suspend(args, fn); + scu_power_mode(scu_base, SCU_PM_NORMAL); + + return ret; +} + +static void amx3_begin_suspend(void) +{ + cpu_idle_poll_ctrl(true); +} + +static void amx3_finish_suspend(void) +{ + cpu_idle_poll_ctrl(false); +} + + static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void) { if (soc_is_am33xx()) @@ -253,7 +309,11 @@ static void am43xx_prepare_rtc_resume(void) static struct am33xx_pm_platform_data am33xx_ops = { .init = am33xx_suspend_init, + .deinit = amx3_suspend_deinit, .soc_suspend = am33xx_suspend, + .cpu_suspend = am33xx_cpu_suspend, + .begin_suspend = amx3_begin_suspend, + .finish_suspend = amx3_finish_suspend, .get_sram_addrs = amx3_get_sram_addrs, .save_context = am33xx_save_context, .restore_context = am33xx_restore_context, @@ -265,7 +325,11 @@ static struct am33xx_pm_platform_data am33xx_ops = { static struct am33xx_pm_platform_data am43xx_ops = { .init = am43xx_suspend_init, + .deinit = amx3_suspend_deinit, .soc_suspend = am43xx_suspend, + .cpu_suspend = am43xx_cpu_suspend, + .begin_suspend = amx3_begin_suspend, + .finish_suspend = amx3_finish_suspend, .get_sram_addrs = amx3_get_sram_addrs, .save_context = am43xx_save_context, .restore_context = am43xx_restore_context, @@ -301,3 +365,64 @@ int __init amx3_common_pm_init(void) return 0; } + +static int __init amx3_idle_init(struct device_node *cpu_node, int cpu) +{ + struct device_node *state_node; + struct amx3_idle_state states[CPUIDLE_STATE_MAX]; + int i; + int state_count = 1; + + for (i = 0; ; i++) { + state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); + if (!state_node) + break; + + if (!of_device_is_available(state_node)) + continue; + + if (i == CPUIDLE_STATE_MAX) { + pr_warn("%s: cpuidle states reached max possible\n", + __func__); + break; + } + + states[state_count].wfi_flags = 0; + + if (of_property_read_bool(state_node, "ti,idle-wkup-m3")) + states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 | + WFI_FLAG_FLUSH_CACHE; + + state_count++; + } + + idle_states = kcalloc(state_count, sizeof(*idle_states), GFP_KERNEL); + if (!idle_states) + return -ENOMEM; + + for (i = 1; i < state_count; i++) + idle_states[i].wfi_flags = states[i].wfi_flags; + + return 0; +} + +static int amx3_idle_enter(unsigned long index) +{ + struct amx3_idle_state *idle_state = &idle_states[index]; + + if (!idle_state) + return -EINVAL; + + if (idle_fn) + idle_fn(idle_state->wfi_flags); + + return 0; +} + +static struct cpuidle_ops amx3_cpuidle_ops __initdata = { + .init = amx3_idle_init, + .suspend = amx3_idle_enter, +}; + +CPUIDLE_METHOD_OF_DECLARE(pm33xx_idle, "ti,am3352", &amx3_cpuidle_ops); +CPUIDLE_METHOD_OF_DECLARE(pm43xx_idle, "ti,am4372", &amx3_cpuidle_ops); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e66e9948636c..6df395fff971 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -191,6 +191,7 @@ void omap_sram_idle(void) int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; u32 sdrc_pwr = 0; + int error; mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); switch (mpu_next_state) { @@ -219,8 +220,11 @@ void omap_sram_idle(void) pwrdm_pre_transition(NULL); /* PER */ - if (per_next_state == PWRDM_POWER_OFF) - cpu_cluster_pm_enter(); + if (per_next_state == PWRDM_POWER_OFF) { + error = cpu_cluster_pm_enter(); + if (error) + return; + } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 0d0a731cb476..8b09cdacc30d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction omap2_gp_timer_irq = { - .name = "gp_timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = omap2_gp_timer_interrupt, -}; - static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { @@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, &clockevent_gpt.name, OMAP_TIMER_POSTED); BUG_ON(res); - omap2_gp_timer_irq.dev_id = &clkev; - setup_irq(clkev.irq, &omap2_gp_timer_irq); + if (request_irq(clkev.irq, omap2_gp_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev)) + pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq); __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW); diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index cf9cb3d2590e..e94a61901ffd 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -3,7 +3,6 @@ menuconfig ARCH_ORION5X bool "Marvell Orion" depends on MMU && ARCH_MULTI_V5 select CPU_FEROCEON - select GENERIC_CLOCKEVENTS select GPIOLIB select MVEBU_MBUS select FORCE_PCI @@ -18,7 +17,6 @@ if ARCH_ORION5X config ARCH_ORION5X_DT bool "Marvell Orion5x Flattened Device Tree" - select USE_OF select ORION_CLK select ORION_IRQCHIP select ORION_TIMER diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index fda9b75c3a33..a39764faf2a0 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -398,7 +398,6 @@ static int ts78xx_fpga_load_devices(void) static int ts78xx_fpga_unload_devices(void) { - int ret = 0; if (ts78xx_fpga.supports.ts_rtc.present == 1) ts78xx_ts_rtc_unload(); @@ -407,7 +406,7 @@ static int ts78xx_fpga_unload_devices(void) if (ts78xx_fpga.supports.ts_rng.present == 1) ts78xx_ts_rng_unload(); - return ret; + return 0; } static int ts78xx_fpga_load(void) diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 425855f456f2..2e35354b61f5 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -312,7 +312,6 @@ static struct pwm_lookup cm_x300_pwm_lookup[] = { static struct platform_pwm_backlight_data cm_x300_backlight_data = { .max_brightness = 100, .dft_brightness = 100, - .enable_gpio = -1, }; static struct platform_device cm_x300_backlight_device = { diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index dbad2f13706c..e5879e8b0682 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -202,7 +202,6 @@ static struct pwm_lookup income_pwm_lookup[] = { static struct platform_pwm_backlight_data income_backlight_data = { .max_brightness = 0x3ff, .dft_brightness = 0x1ff, - .enable_gpio = -1, }; static struct platform_device income_backlight = { diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index f2d73289230f..593c7f793da5 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -563,13 +563,20 @@ static void corgi_bl_kick_battery(void) } } +static struct gpiod_lookup_table corgi_lcdcon_gpio_table = { + .dev_id = "spi1.1", + .table = { + GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_BACKLIGHT_CONT, + "BL_CONT", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct corgi_lcd_platform_data corgi_lcdcon_info = { .init_mode = CORGI_LCD_MODE_VGA, .max_intensity = 0x2f, .default_intensity = 0x1f, .limit_mask = 0x0b, - .gpio_backlight_cont = CORGI_GPIO_BACKLIGHT_CONT, - .gpio_backlight_on = -1, .kick_battery = corgi_bl_kick_battery, }; @@ -609,6 +616,7 @@ static struct spi_board_info corgi_spi_devices[] = { static void __init corgi_init_spi(void) { pxa2xx_set_spi_info(1, &corgi_spi_info); + gpiod_add_lookup_table(&corgi_lcdcon_gpio_table); spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices)); } #else diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index ec10851b63cf..eb85950e7c0e 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -55,7 +55,6 @@ static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = { static struct platform_pwm_backlight_data ezx_backlight_data = { .max_brightness = 1023, .dft_brightness = 1023, - .enable_gpio = -1, }; static struct platform_device ezx_backlight_device = { diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 238a751a8797..1d4c5db54be2 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -556,7 +556,6 @@ static struct platform_device hx4700_lcd = { static struct platform_pwm_backlight_data backlight_data = { .max_brightness = 200, .dft_brightness = 100, - .enable_gpio = -1, }; static struct platform_device backlight = { diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 20e00e970385..6fc40bc06910 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -277,7 +277,6 @@ static struct pwm_lookup lpd270_pwm_lookup[] = { static struct platform_pwm_backlight_data lpd270_backlight_data = { .max_brightness = 1, .dft_brightness = 1, - .enable_gpio = -1, }; static struct platform_device lpd270_backlight_device = { diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 5d0591f93f4d..cd9fa465b9b2 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -401,7 +401,6 @@ static void magician_backlight_exit(struct device *dev) static struct platform_pwm_backlight_data backlight_data = { .max_brightness = 272, .dft_brightness = 100, - .enable_gpio = -1, .init = magician_backlight_init, .notify = magician_backlight_notify, .exit = magician_backlight_exit, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 1b7882920164..d1010ec26e9f 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -256,7 +256,6 @@ static struct pwm_lookup mainstone_pwm_lookup[] = { static struct platform_pwm_backlight_data mainstone_backlight_data = { .max_brightness = 1023, .dft_brightness = 1023, - .enable_gpio = -1, }; static struct platform_device mainstone_backlight_device = { diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 0b8bae9610f1..d3af80317f2d 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -176,7 +176,6 @@ static struct pwm_lookup mioa701_pwm_lookup[] = { static struct platform_pwm_backlight_data mioa701_backlight_data = { .max_brightness = 100, .dft_brightness = 50, - .enable_gpio = -1, }; /* diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index b600b63af3a6..0d246a1aebbc 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -318,7 +318,6 @@ static void palm27x_backlight_exit(struct device *dev) static struct platform_pwm_backlight_data palm27x_backlight_data = { .max_brightness = 0xfe, .dft_brightness = 0x7e, - .enable_gpio = -1, .init = palm27x_backlight_init, .notify = palm27x_backlight_notify, .exit = palm27x_backlight_exit, diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index fda9deaaae02..455cb8ccaf26 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -174,6 +174,15 @@ static inline void palmtc_keys_init(void) {} * Backlight ******************************************************************************/ #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) + +static struct gpiod_lookup_table palmtc_pwm_bl_gpio_table = { + .dev_id = "pwm-backlight.0", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_BL_POWER, + "enable", GPIO_ACTIVE_HIGH), + }, +}; + static struct pwm_lookup palmtc_pwm_lookup[] = { PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS, PWM_POLARITY_NORMAL), @@ -182,7 +191,6 @@ static struct pwm_lookup palmtc_pwm_lookup[] = { static struct platform_pwm_backlight_data palmtc_backlight_data = { .max_brightness = PALMTC_MAX_INTENSITY, .dft_brightness = PALMTC_MAX_INTENSITY, - .enable_gpio = GPIO_NR_PALMTC_BL_POWER, }; static struct platform_device palmtc_backlight = { @@ -195,6 +203,7 @@ static struct platform_device palmtc_backlight = { static void __init palmtc_pwm_init(void) { + gpiod_add_lookup_table(&palmtc_pwm_bl_gpio_table); pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup)); platform_device_register(&palmtc_backlight); } diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 7171014fd311..e3bcf58b4e63 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -175,7 +175,6 @@ static void palmte2_backlight_exit(struct device *dev) static struct platform_pwm_backlight_data palmte2_backlight_data = { .max_brightness = PALMTE2_MAX_INTENSITY, .dft_brightness = PALMTE2_MAX_INTENSITY, - .enable_gpio = -1, .init = palmte2_backlight_init, .notify = palmte2_backlight_notify, .exit = palmte2_backlight_exit, diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index cb1c56769fbc..bf613f88d70b 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -154,7 +154,6 @@ static struct pwm_lookup pcm990_pwm_lookup[] = { static struct platform_pwm_backlight_data pcm990_backlight_data = { .max_brightness = 1023, .dft_brightness = 1023, - .enable_gpio = -1, }; static struct platform_device pcm990_backlight_device = { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index a4fdc399d152..371008e9bb02 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -525,13 +525,33 @@ static void spitz_bl_kick_battery(void) } } +static struct gpiod_lookup_table spitz_lcdcon_gpio_table = { + .dev_id = "spi2.1", + .table = { + GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT, + "BL_CONT", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON, + "BL_ON", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct gpiod_lookup_table akita_lcdcon_gpio_table = { + .dev_id = "spi2.1", + .table = { + GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT, + "BL_CONT", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON, + "BL_ON", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct corgi_lcd_platform_data spitz_lcdcon_info = { .init_mode = CORGI_LCD_MODE_VGA, .max_intensity = 0x2f, .default_intensity = 0x1f, .limit_mask = 0x0b, - .gpio_backlight_cont = SPITZ_GPIO_BACKLIGHT_CONT, - .gpio_backlight_on = SPITZ_GPIO_BACKLIGHT_ON, .kick_battery = spitz_bl_kick_battery, }; @@ -574,12 +594,10 @@ static struct pxa2xx_spi_controller spitz_spi_info = { static void __init spitz_spi_init(void) { - struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info; - - if (machine_is_akita()) { - lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT; - lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON; - } + if (machine_is_akita()) + gpiod_add_lookup_table(&akita_lcdcon_gpio_table); + else + gpiod_add_lookup_table(&spitz_lcdcon_gpio_table); pxa2xx_set_spi_info(2, &spitz_spi_info); spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 93466fa3b0fe..a15eb3b9484d 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -178,13 +178,11 @@ static struct platform_pwm_backlight_data tavorevb_backlight_data[] = { /* primary backlight */ .max_brightness = 100, .dft_brightness = 100, - .enable_gpio = -1, }, [1] = { /* secondary backlight */ .max_brightness = 100, .dft_brightness = 100, - .enable_gpio = -1, }, }; diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index c06031da6676..3aa34e9a15d3 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -404,7 +404,6 @@ static void viper_backlight_exit(struct device *dev) static struct platform_pwm_backlight_data viper_backlight_data = { .max_brightness = 100, .dft_brightness = 100, - .enable_gpio = -1, .init = viper_backlight_init, .notify = viper_backlight_notify, .exit = viper_backlight_exit, diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 900cefc4c5ea..21fd76bb09cd 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -210,13 +210,11 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = { /* Keypad Backlight */ .max_brightness = 1023, .dft_brightness = 0, - .enable_gpio = -1, }, [1] = { /* LCD Backlight */ .max_brightness = 1023, .dft_brightness = 512, - .enable_gpio = -1, }, }; diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index bf2ab5bd49ec..79f0025fa17a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -117,7 +117,6 @@ static struct pwm_lookup zylonite_pwm_lookup[] = { static struct platform_pwm_backlight_data zylonite_backlight_data = { .max_brightness = 100, .dft_brightness = 100, - .enable_gpio = -1, }; static struct platform_device zylonite_backlight_device = { diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index ecbf3c4eb878..1772eccb5caf 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -12,6 +12,11 @@ menuconfig ARCH_QCOM if ARCH_QCOM +config ARCH_IPQ40XX + bool "Enable support for IPQ40XX" + select CLKSRC_QCOM + select HAVE_ARM_ARCH_TIMER + config ARCH_MSM8X60 bool "Enable support for MSM8X60" select CLKSRC_QCOM diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index 1d750152b160..da85cac761ba 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -85,11 +85,6 @@ ioc_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction ioc_timer_irq = { - .name = "timer", - .handler = ioc_timer_interrupt -}; - /* * Set up timer interrupt. */ @@ -97,5 +92,6 @@ void __init ioc_timer_init(void) { WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ)); ioctime_init(); - setup_irq(IRQ_TIMER0, &ioc_timer_irq); + if (request_irq(IRQ_TIMER0, ioc_timer_interrupt, 0, "timer", NULL)) + pr_err("Failed to request irq %d (timer)\n", IRQ_TIMER0); } diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 74d6b68e91c7..e1c372e5447b 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -516,7 +516,6 @@ static void h1940_backlight_exit(struct device *dev) static struct platform_pwm_backlight_data backlight_data = { .max_brightness = 100, .dft_brightness = 50, - .enable_gpio = -1, .init = h1940_backlight_init, .notify = h1940_backlight_notify, .exit = h1940_backlight_exit, diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 03d8f27cdc32..fde98b175c75 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -534,7 +534,6 @@ static int rx1950_backlight_notify(struct device *dev, int brightness) static struct platform_pwm_backlight_data rx1950_backlight_data = { .max_brightness = 24, .dft_brightness = 4, - .enable_gpio = -1, .init = rx1950_backlight_init, .notify = rx1950_backlight_notify, .exit = rx1950_backlight_exit, diff --git a/arch/arm/mach-s3c64xx/dev-backlight.c b/arch/arm/mach-s3c64xx/dev-backlight.c index 799cfdf0606b..09e6da305f60 100644 --- a/arch/arm/mach-s3c64xx/dev-backlight.c +++ b/arch/arm/mach-s3c64xx/dev-backlight.c @@ -65,7 +65,6 @@ static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = { .plat_data = { .max_brightness = 255, .dft_brightness = 255, - .enable_gpio = -1, .init = samsung_bl_init, .exit = samsung_bl_exit, }, @@ -111,8 +110,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data->dft_brightness = bl_data->dft_brightness; if (bl_data->lth_brightness) samsung_bl_data->lth_brightness = bl_data->lth_brightness; - if (bl_data->enable_gpio >= 0) - samsung_bl_data->enable_gpio = bl_data->enable_gpio; if (bl_data->init) samsung_bl_data->init = bl_data->init; if (bl_data->notify) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 8ec6a4f5eb05..da9654255e3f 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -114,7 +114,6 @@ static struct pwm_lookup crag6410_pwm_lookup[] = { static struct platform_pwm_backlight_data crag6410_backlight_data = { .max_brightness = 1000, .dft_brightness = 600, - .enable_gpio = -1, }; static struct platform_device crag6410_backlight_device = { diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index bfe9881d12cc..e7080215c624 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -115,7 +115,6 @@ static void hmt_bl_exit(struct device *dev) static struct platform_pwm_backlight_data hmt_backlight_data = { .max_brightness = 100 * 256, .dft_brightness = 40 * 256, - .enable_gpio = -1, .init = hmt_bl_init, .notify = hmt_bl_notify, .exit = hmt_bl_exit, diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 829d5dbd69ee..5025db607c0f 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -150,7 +150,6 @@ static int smartq_bl_init(struct device *dev) static struct platform_pwm_backlight_data smartq_backlight_data = { .max_brightness = 1000, .dft_brightness = 600, - .enable_gpio = -1, .init = smartq_bl_init, }; diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 908e5aa831c8..56f406c0c3dd 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -623,7 +623,7 @@ static struct pwm_lookup smdk6410_pwm_lookup[] = { }; static struct platform_pwm_backlight_data smdk6410_bl_data = { - .enable_gpio = -1, + /* Intentionally blank */ }; static struct dwc2_hsotg_plat smdk6410_hsotg_pdata; diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index b13ec9088ce5..86406e3f9b22 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -72,7 +72,6 @@ static const char *const r8a7779_compat_dt[] __initconst = { DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") .smp = smp_ops(r8a7779_smp_ops), .map_io = r8a7779_map_io, - .init_early = shmobile_init_delay, .init_irq = r8a7779_init_irq_dt, .init_late = shmobile_init_late, .dt_compat = r8a7779_compat_dt, diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 2fd3aa6f3212..1ee5cd2840e0 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -7,7 +7,6 @@ * Copyright (C) 2014 Ulrich Hecht */ -#include <linux/clk-provider.h> #include <linux/clocksource.h> #include <linux/device.h> #include <linux/dma-contiguous.h> @@ -15,6 +14,7 @@ #include <linux/kernel.h> #include <linux/memblock.h> #include <linux/of.h> +#include <linux/of_clk.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> #include <linux/psci.h> diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index cc08aa752244..eb4a62fa4289 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -56,7 +56,6 @@ static const char *const sh73a0_boards_compat_dt[] __initconst = { DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") .smp = smp_ops(sh73a0_smp_ops), .map_io = sh73a0_map_io, - .init_early = shmobile_init_delay, .init_machine = sh73a0_generic_init, .init_late = shmobile_init_late, .dt_compat = sh73a0_boards_compat_dt, diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c index 289e036c9c30..d1fdb6066f7b 100644 --- a/arch/arm/mach-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -181,12 +181,6 @@ static irqreturn_t spear_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction spear_timer_irq = { - .name = "timer", - .flags = IRQF_TIMER, - .handler = spear_timer_interrupt -}; - static void __init spear_clockevent_init(int irq) { u32 tick_rate; @@ -201,7 +195,8 @@ static void __init spear_clockevent_init(int irq) clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0); - setup_irq(irq, &spear_timer_irq); + if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL)) + pr_err("Failed to request irq %d (timer)\n", irq); } static const struct of_device_id timer_of_match[] __initconst = { diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 933b6930f024..06da2747a90b 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -10,9 +10,9 @@ * warranty of any kind, whether express or implied. */ -#include <linux/clk-provider.h> #include <linux/clocksource.h> #include <linux/init.h> +#include <linux/of_clk.h> #include <linux/platform_device.h> #include <linux/reset/sunxi.h> diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 6c1dff2eccc2..07572b5373b8 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -8,29 +8,14 @@ obj-y += reset.o obj-y += reset-handler.o obj-y += sleep.o obj-y += tegra.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o +obj-y += sleep-tegra20.o +obj-y += sleep-tegra30.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o -ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o -endif -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o -ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o -endif obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o -ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o -endif -obj-$(CONFIG_ARCH_TEGRA_124_SOC) += sleep-tegra30.o obj-$(CONFIG_ARCH_TEGRA_124_SOC) += pm-tegra30.o -ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_TEGRA_124_SOC) += cpuidle-tegra114.o -endif obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c deleted file mode 100644 index 5118f777fd66..000000000000 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ /dev/null @@ -1,89 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. - */ - -#include <asm/firmware.h> -#include <linux/tick.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <linux/firmware/trusted_foundations.h> - -#include <asm/cpuidle.h> -#include <asm/smp_plat.h> -#include <asm/suspend.h> -#include <asm/psci.h> - -#include "cpuidle.h" -#include "pm.h" -#include "sleep.h" - -#ifdef CONFIG_PM_SLEEP -#define TEGRA114_MAX_STATES 2 -#else -#define TEGRA114_MAX_STATES 1 -#endif - -#ifdef CONFIG_PM_SLEEP -static int tegra114_idle_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - local_fiq_disable(); - - tegra_set_cpu_in_lp2(); - cpu_pm_enter(); - - call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2); - - /* Do suspend by ourselves if the firmware does not implement it */ - if (call_firmware_op(do_idle, 0) == -ENOSYS) - cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - - cpu_pm_exit(); - tegra_clear_cpu_in_lp2(); - - local_fiq_enable(); - - return index; -} - -static void tegra114_idle_enter_s2idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - tegra114_idle_power_down(dev, drv, index); -} -#endif - -static struct cpuidle_driver tegra_idle_driver = { - .name = "tegra_idle", - .owner = THIS_MODULE, - .state_count = TEGRA114_MAX_STATES, - .states = { - [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), -#ifdef CONFIG_PM_SLEEP - [1] = { - .enter = tegra114_idle_power_down, - .enter_s2idle = tegra114_idle_enter_s2idle, - .exit_latency = 500, - .target_residency = 1000, - .flags = CPUIDLE_FLAG_TIMER_STOP, - .power_usage = 0, - .name = "powered-down", - .desc = "CPU power gated", - }, -#endif - }, -}; - -int __init tegra114_cpuidle_init(void) -{ - if (!psci_smp_available()) - return cpuidle_register(&tegra_idle_driver, NULL); - - return 0; -} diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c deleted file mode 100644 index 69f3fa270fbe..000000000000 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * CPU idle driver for Tegra CPUs - * - * Copyright (c) 2010-2012, NVIDIA Corporation. - * Copyright (c) 2011 Google, Inc. - * Author: Colin Cross <ccross@android.com> - * Gary King <gking@nvidia.com> - * - * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> - */ - -#include <linux/clk/tegra.h> -#include <linux/tick.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <soc/tegra/flowctrl.h> - -#include <asm/cpuidle.h> -#include <asm/smp_plat.h> -#include <asm/suspend.h> - -#include "cpuidle.h" -#include "iomap.h" -#include "irq.h" -#include "pm.h" -#include "reset.h" -#include "sleep.h" - -#ifdef CONFIG_PM_SLEEP -static bool abort_flag; -static atomic_t abort_barrier; -static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index); -#define TEGRA20_MAX_STATES 2 -#else -#define TEGRA20_MAX_STATES 1 -#endif - -static struct cpuidle_driver tegra_idle_driver = { - .name = "tegra_idle", - .owner = THIS_MODULE, - .states = { - ARM_CPUIDLE_WFI_STATE_PWR(600), -#ifdef CONFIG_PM_SLEEP - { - .enter = tegra20_idle_lp2_coupled, - .exit_latency = 5000, - .target_residency = 10000, - .power_usage = 0, - .flags = CPUIDLE_FLAG_COUPLED | - CPUIDLE_FLAG_TIMER_STOP, - .name = "powered-down", - .desc = "CPU power gated", - }, -#endif - }, - .state_count = TEGRA20_MAX_STATES, - .safe_state_index = 0, -}; - -#ifdef CONFIG_PM_SLEEP -#ifdef CONFIG_SMP -static int tegra20_reset_sleeping_cpu_1(void) -{ - int ret = 0; - - tegra_pen_lock(); - - if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE) - tegra20_cpu_shutdown(1); - else - ret = -EINVAL; - - tegra_pen_unlock(); - - return ret; -} - -static void tegra20_wake_cpu1_from_reset(void) -{ - tegra_pen_lock(); - - tegra20_cpu_clear_resettable(); - - /* enable cpu clock on cpu */ - tegra_enable_cpu_clock(1); - - /* take the CPU out of reset */ - tegra_cpu_out_of_reset(1); - - /* unhalt the cpu */ - flowctrl_write_cpu_halt(1, 0); - - tegra_pen_unlock(); -} - -static int tegra20_reset_cpu_1(void) -{ - if (!cpu_online(1) || !tegra20_reset_sleeping_cpu_1()) - return 0; - - tegra20_wake_cpu1_from_reset(); - return -EBUSY; -} -#else -static inline void tegra20_wake_cpu1_from_reset(void) -{ -} - -static inline int tegra20_reset_cpu_1(void) -{ - return 0; -} -#endif - -static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - while (tegra20_cpu_is_resettable_soon()) - cpu_relax(); - - if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready()) - return false; - - tegra_idle_lp2_last(); - - if (cpu_online(1)) - tegra20_wake_cpu1_from_reset(); - - return true; -} - -#ifdef CONFIG_SMP -static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - cpu_suspend(0, tegra20_sleep_cpu_secondary_finish); - - tegra20_cpu_clear_resettable(); - - return true; -} -#else -static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - return true; -} -#endif - -static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - bool entered_lp2 = false; - - if (tegra_pending_sgi()) - WRITE_ONCE(abort_flag, true); - - cpuidle_coupled_parallel_barrier(dev, &abort_barrier); - - if (abort_flag) { - cpuidle_coupled_parallel_barrier(dev, &abort_barrier); - abort_flag = false; /* clean flag for next coming */ - return -EINTR; - } - - local_fiq_disable(); - - tegra_set_cpu_in_lp2(); - cpu_pm_enter(); - - if (dev->cpu == 0) - entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index); - else - entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index); - - cpu_pm_exit(); - tegra_clear_cpu_in_lp2(); - - local_fiq_enable(); - - smp_rmb(); - - return entered_lp2 ? index : 0; -} -#endif - -/* - * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether - * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around - * this, simply disable LP2 if the PCI driver and DT node are both enabled. - */ -void tegra20_cpuidle_pcie_irqs_in_use(void) -{ - pr_info_once( - "Disabling cpuidle LP2 state, since PCIe IRQs are in use\n"); - cpuidle_driver_state_disabled(&tegra_idle_driver, 1, true); -} - -int __init tegra20_cpuidle_init(void) -{ - return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); -} diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c deleted file mode 100644 index c6128526877d..000000000000 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ /dev/null @@ -1,132 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * CPU idle driver for Tegra CPUs - * - * Copyright (c) 2010-2012, NVIDIA Corporation. - * Copyright (c) 2011 Google, Inc. - * Author: Colin Cross <ccross@android.com> - * Gary King <gking@nvidia.com> - * - * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> - */ - -#include <linux/clk/tegra.h> -#include <linux/tick.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <asm/cpuidle.h> -#include <asm/smp_plat.h> -#include <asm/suspend.h> - -#include "cpuidle.h" -#include "pm.h" -#include "sleep.h" - -#ifdef CONFIG_PM_SLEEP -static int tegra30_idle_lp2(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index); -#endif - -static struct cpuidle_driver tegra_idle_driver = { - .name = "tegra_idle", - .owner = THIS_MODULE, -#ifdef CONFIG_PM_SLEEP - .state_count = 2, -#else - .state_count = 1, -#endif - .states = { - [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), -#ifdef CONFIG_PM_SLEEP - [1] = { - .enter = tegra30_idle_lp2, - .exit_latency = 2000, - .target_residency = 2200, - .power_usage = 0, - .flags = CPUIDLE_FLAG_TIMER_STOP, - .name = "powered-down", - .desc = "CPU power gated", - }, -#endif - }, -}; - -#ifdef CONFIG_PM_SLEEP -static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - /* All CPUs entering LP2 is not working. - * Don't let CPU0 enter LP2 when any secondary CPU is online. - */ - if (num_online_cpus() > 1 || !tegra_cpu_rail_off_ready()) { - cpu_do_idle(); - return false; - } - - tegra_idle_lp2_last(); - - return true; -} - -#ifdef CONFIG_SMP -static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - smp_wmb(); - - cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - - return true; -} -#else -static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - return true; -} -#endif - -static int tegra30_idle_lp2(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - bool entered_lp2 = false; - bool last_cpu; - - local_fiq_disable(); - - last_cpu = tegra_set_cpu_in_lp2(); - cpu_pm_enter(); - - if (dev->cpu == 0) { - if (last_cpu) - entered_lp2 = tegra30_cpu_cluster_power_down(dev, drv, - index); - else - cpu_do_idle(); - } else { - entered_lp2 = tegra30_cpu_core_power_down(dev, drv, index); - } - - cpu_pm_exit(); - tegra_clear_cpu_in_lp2(); - - local_fiq_enable(); - - smp_rmb(); - - return (entered_lp2) ? index : 0; -} -#endif - -int __init tegra30_cpuidle_init(void) -{ - return cpuidle_register(&tegra_idle_driver, NULL); -} diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c deleted file mode 100644 index d565c44cfc93..000000000000 --- a/arch/arm/mach-tegra/cpuidle.c +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-tegra/cpuidle.c - * - * CPU idle driver for Tegra CPUs - * - * Copyright (c) 2010-2012, NVIDIA Corporation. - * Copyright (c) 2011 Google, Inc. - * Author: Colin Cross <ccross@android.com> - * Gary King <gking@nvidia.com> - * - * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include <soc/tegra/fuse.h> - -#include "cpuidle.h" - -void __init tegra_cpuidle_init(void) -{ - switch (tegra_get_chip_id()) { - case TEGRA20: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) - tegra20_cpuidle_init(); - break; - case TEGRA30: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) - tegra30_cpuidle_init(); - break; - case TEGRA114: - case TEGRA124: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || - IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) - tegra114_cpuidle_init(); - break; - } -} - -void tegra_cpuidle_pcie_irqs_in_use(void) -{ - switch (tegra_get_chip_id()) { - case TEGRA20: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) - tegra20_cpuidle_pcie_irqs_in_use(); - break; - } -} diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h deleted file mode 100644 index 4e1f459f5bd8..000000000000 --- a/arch/arm/mach-tegra/cpuidle.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. - */ - -#ifndef __MACH_TEGRA_CPUIDLE_H -#define __MACH_TEGRA_CPUIDLE_H - -#ifdef CONFIG_CPU_IDLE -int tegra20_cpuidle_init(void); -void tegra20_cpuidle_pcie_irqs_in_use(void); -int tegra30_cpuidle_init(void); -int tegra114_cpuidle_init(void); -void tegra_cpuidle_init(void); -void tegra_cpuidle_pcie_irqs_in_use(void); -#else -static inline void tegra_cpuidle_init(void) {} -static inline void tegra_cpuidle_pcie_irqs_in_use(void) {} -#endif - -#endif diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index ace7a390b5fe..4e1ee70b2a3f 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -18,9 +18,10 @@ #include <linux/of.h> #include <linux/syscore_ops.h> +#include <soc/tegra/irq.h> + #include "board.h" #include "iomap.h" -#include "irq.h" #define SGI_MASK 0xFFFF diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h deleted file mode 100644 index 7a94cf121448..000000000000 --- a/arch/arm/mach-tegra/irq.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. - */ - -#ifndef __TEGRA_IRQ_H -#define __TEGRA_IRQ_H - -bool tegra_pending_sgi(void); - -#endif diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 3cab81b82866..d1e1a61b12cf 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -110,7 +110,7 @@ static void suspend_cpu_complex(void) flowctrl_cpu_suspend_enter(cpu); } -void tegra_clear_cpu_in_lp2(void) +void tegra_pm_clear_cpu_in_lp2(void) { int phy_cpu_id = cpu_logical_map(smp_processor_id()); u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; @@ -123,11 +123,9 @@ void tegra_clear_cpu_in_lp2(void) spin_unlock(&tegra_lp2_lock); } -bool tegra_set_cpu_in_lp2(void) +void tegra_pm_set_cpu_in_lp2(void) { int phy_cpu_id = cpu_logical_map(smp_processor_id()); - bool last_cpu = false; - cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask; u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; spin_lock(&tegra_lp2_lock); @@ -135,22 +133,15 @@ bool tegra_set_cpu_in_lp2(void) BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id))); *cpu_in_lp2 |= BIT(phy_cpu_id); - if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask)) - last_cpu = true; - else if (tegra_get_chip_id() == TEGRA20 && phy_cpu_id == 1) - tegra20_cpu_set_resettable_soon(); - spin_unlock(&tegra_lp2_lock); - return last_cpu; -} - -int tegra_cpu_do_idle(void) -{ - return cpu_do_idle(); } static int tegra_sleep_cpu(unsigned long v2p) { + if (tegra_cpu_car_ops->rail_off_ready && + WARN_ON(!tegra_cpu_rail_off_ready())) + return -EBUSY; + /* * L2 cache disabling using kernel API only allowed when all * secondary CPU's are offline. Cache have to be disabled with @@ -159,9 +150,10 @@ static int tegra_sleep_cpu(unsigned long v2p) * if any of secondary CPU's is online and this is the LP2-idle * code-path only for Tegra20/30. */ - if (trusted_foundations_registered()) - outer_disable(); - +#ifdef CONFIG_OUTER_CACHE + if (trusted_foundations_registered() && outer_cache.disable) + outer_cache.disable(); +#endif /* * Note that besides of setting up CPU reset vector this firmware * call may also do the following, depending on the FW version: @@ -202,14 +194,16 @@ static void tegra_pm_set(enum tegra_suspend_mode mode) tegra_pmc_enter_suspend_mode(mode); } -void tegra_idle_lp2_last(void) +int tegra_pm_enter_lp2(void) { + int err; + tegra_pm_set(TEGRA_SUSPEND_LP2); cpu_cluster_pm_enter(); suspend_cpu_complex(); - cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); /* * Resume L2 cache if it wasn't re-enabled early during resume, @@ -221,6 +215,8 @@ void tegra_idle_lp2_last(void) restore_cpu_complex(); cpu_cluster_pm_exit(); + + return err; } enum tegra_suspend_mode tegra_pm_validate_suspend_mode( @@ -365,7 +361,7 @@ static int tegra_suspend_enter(suspend_state_t state) tegra_suspend_enter_lp1(); break; case TEGRA_SUSPEND_LP2: - tegra_set_cpu_in_lp2(); + tegra_pm_set_cpu_in_lp2(); break; default: break; @@ -386,7 +382,7 @@ static int tegra_suspend_enter(suspend_state_t state) tegra_suspend_exit_lp1(); break; case TEGRA_SUSPEND_LP2: - tegra_clear_cpu_in_lp2(); + tegra_pm_clear_cpu_in_lp2(); break; default: break; @@ -436,4 +432,18 @@ void __init tegra_init_suspend(void) suspend_set_ops(&tegra_suspend_ops); } + +int tegra_pm_park_secondary_cpu(unsigned long cpu) +{ + if (cpu > 0) { + tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS); + + if (tegra_get_chip_id() == TEGRA20) + tegra20_hotplug_shutdown(); + else + tegra30_hotplug_shutdown(); + } + + return -EINVAL; +} #endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 569151b3edc0..81525f5f4a44 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -23,10 +23,6 @@ void tegra20_sleep_core_init(void); void tegra30_lp1_iram_hook(void); void tegra30_sleep_core_init(void); -void tegra_clear_cpu_in_lp2(void); -bool tegra_set_cpu_in_lp2(void); -int tegra_cpu_do_idle(void); -void tegra_idle_lp2_last(void); extern void (*tegra_tear_down_cpu)(void); #ifdef CONFIG_PM_SLEEP diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index e3f34815c9da..53123ae4ac3b 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -183,17 +183,6 @@ after_errata: bleq __die @ CPU not present (to OS) #endif -#ifdef CONFIG_ARCH_TEGRA_2x_SOC - /* Are we on Tegra20? */ - cmp r6, #TEGRA20 - bne 1f - /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov r0, #CPU_NOT_RESETTABLE - cmp r10, #0 - strbne r0, [r12, #RESET_DATA(RESETTABLE_STATUS)] -1: -#endif - /* Waking up from LP1? */ ldr r8, [r12, #RESET_DATA(MASK_LP1)] tst r8, r11 @ if in_lp1 diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index a4cfc08159f6..51265592cb1a 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -16,9 +16,8 @@ #define TEGRA_RESET_STARTUP_SECONDARY 3 #define TEGRA_RESET_STARTUP_LP2 4 #define TEGRA_RESET_STARTUP_LP1 5 -#define TEGRA_RESET_RESETTABLE_STATUS 6 -#define TEGRA_RESET_TF_PRESENT 7 -#define TEGRA_RESET_DATA_SIZE 8 +#define TEGRA_RESET_TF_PRESENT 6 +#define TEGRA_RESET_DATA_SIZE 7 #define RESET_DATA(x) ((TEGRA_RESET_##x)*4) @@ -42,10 +41,6 @@ void __tegra_cpu_reset_handler_end(void); (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \ (u32)__tegra_cpu_reset_handler_start))) -#define tegra20_cpu1_resettable_status \ - (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ - ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \ - (u32)__tegra_cpu_reset_handler_start))) #endif #define tegra_cpu_reset_handler_offset \ diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 9a89f30d53ca..0e00ba8cf646 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -43,9 +43,6 @@ #define APB_MISC_XM2CFGCPADCTRL2 0x8e4 #define APB_MISC_XM2CFGDPADCTRL2 0x8e8 -#define __tegra20_cpu1_resettable_status_offset \ - (__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS)) - .macro pll_enable, rd, r_car_base, pll_base ldr \rd, [\r_car_base, #\pll_base] tst \rd, #(1 << 30) @@ -90,10 +87,6 @@ ENDPROC(tegra20_hotplug_shutdown) ENTRY(tegra20_cpu_shutdown) cmp r0, #0 reteq lr @ must not be called for CPU 0 - mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT - ldr r2, =__tegra20_cpu1_resettable_status_offset - mov r12, #CPU_RESETTABLE - strb r12, [r1, r2] cpu_to_halt_reg r1, r0 ldr r3, =TEGRA_FLOW_CTRL_VIRT @@ -117,107 +110,6 @@ ENDPROC(tegra20_cpu_shutdown) #ifdef CONFIG_PM_SLEEP /* - * tegra_pen_lock - * - * spinlock implementation with no atomic test-and-set and no coherence - * using Peterson's algorithm on strongly-ordered registers - * used to synchronize a cpu waking up from wfi with entering lp2 on idle - * - * The reference link of Peterson's algorithm: - * http://en.wikipedia.org/wiki/Peterson's_algorithm - * - * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm) - * on cpu 0: - * r2 = flag[0] (in SCRATCH38) - * r3 = flag[1] (in SCRATCH39) - * on cpu1: - * r2 = flag[1] (in SCRATCH39) - * r3 = flag[0] (in SCRATCH38) - * - * must be called with MMU on - * corrupts r0-r3, r12 - */ -ENTRY(tegra_pen_lock) - mov32 r3, TEGRA_PMC_VIRT - cpu_id r0 - add r1, r3, #PMC_SCRATCH37 - cmp r0, #0 - addeq r2, r3, #PMC_SCRATCH38 - addeq r3, r3, #PMC_SCRATCH39 - addne r2, r3, #PMC_SCRATCH39 - addne r3, r3, #PMC_SCRATCH38 - - mov r12, #1 - str r12, [r2] @ flag[cpu] = 1 - dsb - str r12, [r1] @ !turn = cpu -1: dsb - ldr r12, [r3] - cmp r12, #1 @ flag[!cpu] == 1? - ldreq r12, [r1] - cmpeq r12, r0 @ !turn == cpu? - beq 1b @ while !turn == cpu && flag[!cpu] == 1 - - ret lr @ locked -ENDPROC(tegra_pen_lock) - -ENTRY(tegra_pen_unlock) - dsb - mov32 r3, TEGRA_PMC_VIRT - cpu_id r0 - cmp r0, #0 - addeq r2, r3, #PMC_SCRATCH38 - addne r2, r3, #PMC_SCRATCH39 - mov r12, #0 - str r12, [r2] - ret lr -ENDPROC(tegra_pen_unlock) - -/* - * tegra20_cpu_clear_resettable(void) - * - * Called to clear the "resettable soon" flag in IRAM variable when - * it is expected that the secondary CPU will be idle soon. - */ -ENTRY(tegra20_cpu_clear_resettable) - mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT - ldr r2, =__tegra20_cpu1_resettable_status_offset - mov r12, #CPU_NOT_RESETTABLE - strb r12, [r1, r2] - ret lr -ENDPROC(tegra20_cpu_clear_resettable) - -/* - * tegra20_cpu_set_resettable_soon(void) - * - * Called to set the "resettable soon" flag in IRAM variable when - * it is expected that the secondary CPU will be idle soon. - */ -ENTRY(tegra20_cpu_set_resettable_soon) - mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT - ldr r2, =__tegra20_cpu1_resettable_status_offset - mov r12, #CPU_RESETTABLE_SOON - strb r12, [r1, r2] - ret lr -ENDPROC(tegra20_cpu_set_resettable_soon) - -/* - * tegra20_cpu_is_resettable_soon(void) - * - * Returns true if the "resettable soon" flag in IRAM variable has been - * set because it is expected that the secondary CPU will be idle soon. - */ -ENTRY(tegra20_cpu_is_resettable_soon) - mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT - ldr r2, =__tegra20_cpu1_resettable_status_offset - ldrb r12, [r1, r2] - cmp r12, #CPU_RESETTABLE_SOON - moveq r0, #1 - movne r0, #0 - ret lr -ENDPROC(tegra20_cpu_is_resettable_soon) - -/* * tegra20_sleep_core_finish(unsigned long v2p) * * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to @@ -243,68 +135,6 @@ ENTRY(tegra20_sleep_core_finish) ENDPROC(tegra20_sleep_core_finish) /* - * tegra20_sleep_cpu_secondary_finish(unsigned long v2p) - * - * Enters WFI on secondary CPU by exiting coherency. - */ -ENTRY(tegra20_sleep_cpu_secondary_finish) - stmfd sp!, {r4-r11, lr} - - mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency - - /* Flush and disable the L1 data cache */ - mov r0, #TEGRA_FLUSH_CACHE_LOUIS - bl tegra_disable_clean_inv_dcache - - mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT - ldr r4, =__tegra20_cpu1_resettable_status_offset - mov r3, #CPU_RESETTABLE - strb r3, [r0, r4] - - bl tegra_cpu_do_idle - - /* - * cpu may be reset while in wfi, which will return through - * tegra_resume to cpu_resume - * or interrupt may wake wfi, which will return here - * cpu state is unchanged - MMU is on, cache is on, coherency - * is off, and the data cache is off - * - * r11 contains the original actlr - */ - - bl tegra_pen_lock - - mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT - ldr r4, =__tegra20_cpu1_resettable_status_offset - mov r3, #CPU_NOT_RESETTABLE - strb r3, [r0, r4] - - bl tegra_pen_unlock - - /* Re-enable the data cache */ - mrc p15, 0, r10, c1, c0, 0 - orr r10, r10, #CR_C - mcr p15, 0, r10, c1, c0, 0 - isb - - mcr p15, 0, r11, c1, c0, 1 @ reenable coherency - - /* Invalidate the TLBs & BTAC */ - mov r1, #0 - mcr p15, 0, r1, c8, c3, 0 @ invalidate shared TLBs - mcr p15, 0, r1, c7, c1, 6 @ invalidate shared BTAC - dsb - isb - - /* the cpu was running with coherency disabled, - * caches may be out of date */ - bl v7_flush_kern_cache_louis - - ldmfd sp!, {r4 - r11, pc} -ENDPROC(tegra20_sleep_cpu_secondary_finish) - -/* * tegra20_tear_down_cpu * * Switches the CPU cluster to PLL-P and enters sleep. diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 02cc6ff96f30..e7bcf7dc4675 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -265,11 +265,11 @@ ENTRY(tegra30_sleep_core_finish) ENDPROC(tegra30_sleep_core_finish) /* - * tegra30_sleep_cpu_secondary_finish(unsigned long v2p) + * tegra30_pm_secondary_cpu_suspend(unsigned long unused_arg) * * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU. */ -ENTRY(tegra30_sleep_cpu_secondary_finish) +ENTRY(tegra30_pm_secondary_cpu_suspend) mov r7, lr /* Flush and disable the L1 data cache */ @@ -281,7 +281,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish) bl tegra30_cpu_shutdown mov r0, #1 @ never return here ret r7 -ENDPROC(tegra30_sleep_cpu_secondary_finish) +ENDPROC(tegra30_pm_secondary_cpu_suspend) /* * tegra30_tear_down_cpu diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 78ef32a907c8..4718a3cb45a1 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -114,29 +114,14 @@ .endm #else -void tegra_pen_lock(void); -void tegra_pen_unlock(void); void tegra_resume(void); int tegra_sleep_cpu_finish(unsigned long); void tegra_disable_clean_inv_dcache(u32 flag); -#ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_shutdown(void); void tegra30_hotplug_shutdown(void); -#endif - -void tegra20_cpu_shutdown(int cpu); -int tegra20_cpu_is_resettable_soon(void); -void tegra20_cpu_clear_resettable(void); -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -void tegra20_cpu_set_resettable_soon(void); -#else -static inline void tegra20_cpu_set_resettable_soon(void) {} -#endif -int tegra20_sleep_cpu_secondary_finish(unsigned long); void tegra20_tear_down_cpu(void); -int tegra30_sleep_cpu_secondary_finish(unsigned long); void tegra30_tear_down_cpu(void); #endif diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index e512e606eabd..f1ce2857a251 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -36,13 +36,12 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach-types.h> +#include <asm/psci.h> #include <asm/setup.h> #include "board.h" #include "common.h" -#include "cpuidle.h" #include "iomap.h" -#include "irq.h" #include "pm.h" #include "reset.h" #include "sleep.h" @@ -86,7 +85,6 @@ static void __init tegra_dt_init(void) static void __init tegra_dt_init_late(void) { tegra_init_suspend(); - tegra_cpuidle_init(); if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && of_machine_is_compatible("compal,paz00")) @@ -95,6 +93,9 @@ static void __init tegra_dt_init_late(void) if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && of_machine_is_compatible("nvidia,tegra20")) platform_device_register_simple("tegra20-cpufreq", -1, NULL, 0); + + if (IS_ENABLED(CONFIG_ARM_TEGRA_CPUIDLE) && !psci_smp_available()) + platform_device_register_simple("tegra-cpuidle", -1, NULL, 0); } static const char * const tegra_dt_board_compat[] = { diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 3a4248fd7962..a9dd2f71cd19 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -12,10 +12,10 @@ #include <linux/cpumask.h> #include <linux/platform_device.h> #include <linux/clk.h> -#include <linux/clk-provider.h> #include <linux/clk/zynq.h> #include <linux/clocksource.h> #include <linux/of_address.h> +#include <linux/of_clk.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of.h> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 9414d72f664b..8a8949174b1c 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -179,6 +179,23 @@ static void arm_dma_sync_single_for_device(struct device *dev, __dma_page_cpu_to_dev(page, offset, size, dir); } +/* + * Return whether the given device DMA address mask can be supported + * properly. For example, if your device can only drive the low 24-bits + * during bus mastering, then you would pass 0x00ffffff as the mask + * to this function. + */ +static int arm_dma_supported(struct device *dev, u64 mask) +{ + unsigned long max_dma_pfn = min(max_pfn - 1, arm_dma_pfn_limit); + + /* + * Translate the device's DMA mask to a PFN limit. This + * PFN number includes the page which we can DMA to. + */ + return dma_to_pfn(dev, mask) >= max_dma_pfn; +} + const struct dma_map_ops arm_dma_ops = { .alloc = arm_dma_alloc, .free = arm_dma_free, @@ -219,49 +236,6 @@ const struct dma_map_ops arm_coherent_dma_ops = { }; EXPORT_SYMBOL(arm_coherent_dma_ops); -static int __dma_supported(struct device *dev, u64 mask, bool warn) -{ - unsigned long max_dma_pfn = min(max_pfn - 1, arm_dma_pfn_limit); - - /* - * Translate the device's DMA mask to a PFN limit. This - * PFN number includes the page which we can DMA to. - */ - if (dma_to_pfn(dev, mask) < max_dma_pfn) { - if (warn) - dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n", - mask, - dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1, - max_dma_pfn + 1); - return 0; - } - - return 1; -} - -static u64 get_coherent_dma_mask(struct device *dev) -{ - u64 mask = (u64)DMA_BIT_MASK(32); - - if (dev) { - mask = dev->coherent_dma_mask; - - /* - * Sanity check the DMA mask - it must be non-zero, and - * must be able to be satisfied by a DMA allocation. - */ - if (mask == 0) { - dev_warn(dev, "coherent DMA mask is unset\n"); - return 0; - } - - if (!__dma_supported(dev, mask, true)) - return 0; - } - - return mask; -} - static void __dma_clear_buffer(struct page *page, size_t size, int coherent_flag) { /* @@ -688,7 +662,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, unsigned long attrs, const void *caller) { - u64 mask = get_coherent_dma_mask(dev); + u64 mask = min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit); struct page *page = NULL; void *addr; bool allowblock, cma; @@ -712,9 +686,6 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, } #endif - if (!mask) - return NULL; - buf = kzalloc(sizeof(*buf), gfp & ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM)); if (!buf) @@ -1087,17 +1058,6 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, dir); } -/* - * Return whether the given device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits - * during bus mastering, then you would pass 0x00ffffff as the mask - * to this function. - */ -int arm_dma_supported(struct device *dev, u64 mask) -{ - return __dma_supported(dev, mask, false); -} - static const struct dma_map_ops *arm_get_dma_map_ops(bool coherent) { /* diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index bd0f4821f7e1..2dd5c41cbb8d 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -189,7 +189,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) */ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma) { - unsigned int mask = VM_READ | VM_WRITE | VM_EXEC; + unsigned int mask = VM_ACCESS_FLAGS; if ((fsr & FSR_WRITE) && !(fsr & FSR_CM)) mask = VM_WRITE; @@ -241,7 +241,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) struct mm_struct *mm; int sig, code; vm_fault_t fault; - unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; + unsigned int flags = FAULT_FLAG_DEFAULT; if (kprobe_page_fault(regs, fsr)) return 0; @@ -295,7 +295,7 @@ retry: * signal first. We do not need to release the mmap_sem because * it would already be released in __lock_page_or_retry in * mm/filemap.c. */ - if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) { + if (fault_signal_pending(fault, regs)) { if (!user_mode(regs)) goto no_context; return 0; @@ -319,9 +319,6 @@ retry: regs, addr); } if (fault & VM_FAULT_RETRY) { - /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk - * of starvation. */ - flags &= ~FAULT_FLAG_ALLOW_RETRY; flags |= FAULT_FLAG_TRIED; goto retry; } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 5d0d0f86e790..ec8d0008bfa1 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -63,9 +63,6 @@ static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK; static unsigned int ecc_mask __initdata = 0; pgprot_t pgprot_user; pgprot_t pgprot_kernel; -pgprot_t pgprot_hyp_device; -pgprot_t pgprot_s2; -pgprot_t pgprot_s2_device; EXPORT_SYMBOL(pgprot_user); EXPORT_SYMBOL(pgprot_kernel); @@ -75,15 +72,8 @@ struct cachepolicy { unsigned int cr_mask; pmdval_t pmd; pteval_t pte; - pteval_t pte_s2; }; -#ifdef CONFIG_ARM_LPAE -#define s2_policy(policy) policy -#else -#define s2_policy(policy) 0 -#endif - unsigned long kimage_voffset __ro_after_init; static struct cachepolicy cache_policies[] __initdata = { @@ -92,31 +82,26 @@ static struct cachepolicy cache_policies[] __initdata = { .cr_mask = CR_W|CR_C, .pmd = PMD_SECT_UNCACHED, .pte = L_PTE_MT_UNCACHED, - .pte_s2 = s2_policy(L_PTE_S2_MT_UNCACHED), }, { .policy = "buffered", .cr_mask = CR_C, .pmd = PMD_SECT_BUFFERED, .pte = L_PTE_MT_BUFFERABLE, - .pte_s2 = s2_policy(L_PTE_S2_MT_UNCACHED), }, { .policy = "writethrough", .cr_mask = 0, .pmd = PMD_SECT_WT, .pte = L_PTE_MT_WRITETHROUGH, - .pte_s2 = s2_policy(L_PTE_S2_MT_WRITETHROUGH), }, { .policy = "writeback", .cr_mask = 0, .pmd = PMD_SECT_WB, .pte = L_PTE_MT_WRITEBACK, - .pte_s2 = s2_policy(L_PTE_S2_MT_WRITEBACK), }, { .policy = "writealloc", .cr_mask = 0, .pmd = PMD_SECT_WBWA, .pte = L_PTE_MT_WRITEALLOC, - .pte_s2 = s2_policy(L_PTE_S2_MT_WRITEBACK), } }; @@ -246,9 +231,6 @@ static struct mem_type mem_types[] __ro_after_init = { [MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED | L_PTE_SHARED, - .prot_pte_s2 = s2_policy(PROT_PTE_S2_DEVICE) | - s2_policy(L_PTE_S2_MT_DEV_SHARED) | - L_PTE_SHARED, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PROT_SECT_DEVICE | PMD_SECT_S, .domain = DOMAIN_IO, @@ -434,7 +416,6 @@ static void __init build_mem_type_table(void) struct cachepolicy *cp; unsigned int cr = get_cr(); pteval_t user_pgprot, kern_pgprot, vecs_pgprot; - pteval_t hyp_device_pgprot, s2_pgprot, s2_device_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -558,9 +539,6 @@ static void __init build_mem_type_table(void) */ cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; - s2_pgprot = cp->pte_s2; - hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte; - s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2; #ifndef CONFIG_ARM_LPAE /* @@ -604,7 +582,6 @@ static void __init build_mem_type_table(void) user_pgprot |= L_PTE_SHARED; kern_pgprot |= L_PTE_SHARED; vecs_pgprot |= L_PTE_SHARED; - s2_pgprot |= L_PTE_SHARED; mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; @@ -666,9 +643,6 @@ static void __init build_mem_type_table(void) pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot); pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | kern_pgprot); - pgprot_s2 = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | s2_pgprot); - pgprot_s2_device = __pgprot(s2_device_pgprot); - pgprot_hyp_device = __pgprot(hyp_device_pgprot); mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; @@ -1672,3 +1646,17 @@ void __init early_mm_init(const struct machine_desc *mdesc) build_mem_type_table(); early_paging_init(mdesc); } + +void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval) +{ + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_valid_user(pteval)) { + if (!pte_special(pteval)) + __sync_icache_dcache(pteval); + ext |= PTE_EXT_NG; + } + + set_pte_ext(ptep, pteval, ext); +} diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index cc29869d12a3..bf85d6db4931 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -929,7 +929,11 @@ static inline void emit_a32_rsh_i64(const s8 dst[], rd = arm_bpf_get_reg64(dst, tmp, ctx); /* Do LSR operation */ - if (val < 32) { + if (val == 0) { + /* An immediate value of 0 encodes a shift amount of 32 + * for LSR. To shift by 0, don't do anything. + */ + } else if (val < 32) { emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx); emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx); emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_LSR, val), ctx); @@ -955,7 +959,11 @@ static inline void emit_a32_arsh_i64(const s8 dst[], rd = arm_bpf_get_reg64(dst, tmp, ctx); /* Do ARSH operation */ - if (val < 32) { + if (val == 0) { + /* An immediate value of 0 encodes a shift amount of 32 + * for ASR. To shift by 0, don't do anything. + */ + } else if (val < 32) { emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx); emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx); emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_ASR, val), ctx); @@ -992,21 +1000,35 @@ static inline void emit_a32_mul_r64(const s8 dst[], const s8 src[], arm_bpf_put_reg32(dst_hi, rd[0], ctx); } +static bool is_ldst_imm(s16 off, const u8 size) +{ + s16 off_max = 0; + + switch (size) { + case BPF_B: + case BPF_W: + off_max = 0xfff; + break; + case BPF_H: + off_max = 0xff; + break; + case BPF_DW: + /* Need to make sure off+4 does not overflow. */ + off_max = 0xfff - 4; + break; + } + return -off_max <= off && off <= off_max; +} + /* *(size *)(dst + off) = src */ static inline void emit_str_r(const s8 dst, const s8 src[], - s32 off, struct jit_ctx *ctx, const u8 sz){ + s16 off, struct jit_ctx *ctx, const u8 sz){ const s8 *tmp = bpf2a32[TMP_REG_1]; - s32 off_max; s8 rd; rd = arm_bpf_get_reg32(dst, tmp[1], ctx); - if (sz == BPF_H) - off_max = 0xff; - else - off_max = 0xfff; - - if (off < 0 || off > off_max) { + if (!is_ldst_imm(off, sz)) { emit_a32_mov_i(tmp[0], off, ctx); emit(ARM_ADD_R(tmp[0], tmp[0], rd), ctx); rd = tmp[0]; @@ -1035,18 +1057,12 @@ static inline void emit_str_r(const s8 dst, const s8 src[], /* dst = *(size*)(src + off) */ static inline void emit_ldx_r(const s8 dst[], const s8 src, - s32 off, struct jit_ctx *ctx, const u8 sz){ + s16 off, struct jit_ctx *ctx, const u8 sz){ const s8 *tmp = bpf2a32[TMP_REG_1]; const s8 *rd = is_stacked(dst_lo) ? tmp : dst; s8 rm = src; - s32 off_max; - - if (sz == BPF_H) - off_max = 0xff; - else - off_max = 0xfff; - if (off < 0 || off > off_max) { + if (!is_ldst_imm(off, sz)) { emit_a32_mov_i(tmp[0], off, ctx); emit(ARM_ADD_R(tmp[0], tmp[0], src), ctx); rm = tmp[0]; diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index ffb93db68e9c..509d4824dc1c 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -177,12 +177,6 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction orion_timer_irq = { - .name = "orion_tick", - .flags = IRQF_TIMER, - .handler = orion_timer_interrupt -}; - void __init orion_time_set_base(void __iomem *_timer_base) { @@ -236,7 +230,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, /* * Setup clockevent timer (interrupt-driven). */ - setup_irq(irq, &orion_timer_irq); + if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick", + NULL)) + pr_err("Failed to request irq %u (orion_tick)\n", irq); orion_clkevt.cpumask = cpumask_of(0); clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe); } diff --git a/arch/arm/vdso/.gitignore b/arch/arm/vdso/.gitignore index 6b47f6e0b032..dfa06f5365cf 100644 --- a/arch/arm/vdso/.gitignore +++ b/arch/arm/vdso/.gitignore @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only vdso.lds vdso.so.raw vdsomunge diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index dd6804a64f1a..fd4e1ce1daf9 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -36,7 +36,7 @@ #include <linux/mm.h> -struct start_info _xen_start_info; +static struct start_info _xen_start_info; struct start_info *xen_start_info = &_xen_start_info; EXPORT_SYMBOL(xen_start_info); |