aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h')
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h343
1 files changed, 0 insertions, 343 deletions
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
deleted file mode 100644
index daacebb047c2..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- *
- * Macros for external SMP-safe access to the PMC MSP71xx reference
- * board GPIO pins
- *
- * Copyright 2010 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MSP_GPIO_MACROS_H__
-#define __MSP_GPIO_MACROS_H__
-
-#include <msp_regops.h>
-#include <msp_regs.h>
-
-#ifdef CONFIG_PMC_MSP7120_GW
-#define MSP_NUM_GPIOS 20
-#else
-#define MSP_NUM_GPIOS 28
-#endif
-
-/* -- GPIO Enumerations -- */
-enum msp_gpio_data {
- MSP_GPIO_LO = 0,
- MSP_GPIO_HI = 1,
- MSP_GPIO_NONE, /* Special - Means pin is out of range */
- MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */
-};
-
-enum msp_gpio_mode {
- MSP_GPIO_INPUT = 0x0,
- /* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */
- MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */
- MSP_GPIO_OUTPUT = 0x8,
- MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */
- MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */
- MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */
- MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */
-};
-
-/* -- Static Tables -- */
-
-/* Maps pins to data register */
-static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = {
- /* GPIO 0 and 1 on the first register */
- GPIO_DATA1_REG, GPIO_DATA1_REG,
- /* GPIO 2, 3, 4, and 5 on the second register */
- GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG,
- /* GPIO 6, 7, 8, and 9 on the third register */
- GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG,
- /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
- GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG,
- GPIO_DATA4_REG, GPIO_DATA4_REG,
- /* GPIO 16 - 23 on the first strange EXTENDED register */
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- /* GPIO 24 - 27 on the second strange EXTENDED register */
- EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
- EXTENDED_GPIO2_REG,
-};
-
-/* Maps pins to mode register */
-static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = {
- /* GPIO 0 and 1 on the first register */
- GPIO_CFG1_REG, GPIO_CFG1_REG,
- /* GPIO 2, 3, 4, and 5 on the second register */
- GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG,
- /* GPIO 6, 7, 8, and 9 on the third register */
- GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG,
- /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
- GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG,
- GPIO_CFG4_REG, GPIO_CFG4_REG,
- /* GPIO 16 - 23 on the first strange EXTENDED register */
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- /* GPIO 24 - 27 on the second strange EXTENDED register */
- EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
- EXTENDED_GPIO2_REG,
-};
-
-/* Maps 'basic' pins to relative offset from 0 per register */
-static int MSP_GPIO_OFFSET[] = {
- /* GPIO 0 and 1 on the first register */
- 0, 0,
- /* GPIO 2, 3, 4, and 5 on the second register */
- 2, 2, 2, 2,
- /* GPIO 6, 7, 8, and 9 on the third register */
- 6, 6, 6, 6,
- /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
- 10, 10, 10, 10, 10, 10,
-};
-
-/* Maps MODE to allowed pin mask */
-static unsigned int MSP_GPIO_MODE_ALLOWED[] = {
- 0xffffffff, /* Mode 0 - INPUT */
- 0x00000, /* Mode 1 - INTERRUPT */
- 0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/
- 0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */
- 0xffffffff, /* Mode 8 - OUTPUT */
- 0x0000f, /* Mode 9 - UART_OUTPUT/
- PERF_TIMERA (GPIO 0, 1, 2, 3) */
- 0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */
- 0x00000, /* Mode b - Not really a mode! */
-};
-
-/* -- Bit masks -- */
-
-/* This gives you the 'register relative offset gpio' number */
-#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio])
-
-/* These take the 'register relative offset gpio' number */
-#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio)
-#define BASIC_MODE_REG_VALUE(mode, ogpio) \
- (mode << BASIC_MODE_REG_SHIFT(ogpio))
-#define BASIC_MODE_REG_MASK(ogpio) \
- BASIC_MODE_REG_VALUE(0xf, ogpio)
-#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4)
-#define BASIC_MODE_REG_FROM_REG(data, ogpio) \
- ((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio))
-
-/* These take the actual GPIO number (0 through 15) */
-#define BASIC_DATA_MASK(gpio) \
- BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_MASK(gpio) \
- BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE(mode, gpio) \
- BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_SHIFT(gpio) \
- BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_FROM_REG(data, gpio) \
- BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio))
-
-/*
- * Each extended GPIO register is 32 bits long and is responsible for up to
- * eight GPIOs. The least significant 16 bits contain the set and clear bit
- * pair for each of the GPIOs. The most significant 16 bits contain the
- * disable and enable bit pair for each of the GPIOs. For example, the
- * extended GPIO reg for GPIOs 16-23 is as follows:
- *
- * 31: GPIO23_DISABLE
- * ...
- * 19: GPIO17_DISABLE
- * 18: GPIO17_ENABLE
- * 17: GPIO16_DISABLE
- * 16: GPIO16_ENABLE
- * ...
- * 3: GPIO17_SET
- * 2: GPIO17_CLEAR
- * 1: GPIO16_SET
- * 0: GPIO16_CLEAR
- */
-
-/* This gives the 'register relative offset gpio' number */
-#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24)
-
-/* These take the 'register relative offset gpio' number */
-#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16))
-#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16))
-#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2))
-#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2))
-
-/* These take the actual GPIO number (16 through 27) */
-#define EXTENDED_DISABLE(gpio) \
- EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio))
-#define EXTENDED_ENABLE(gpio) \
- EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio))
-#define EXTENDED_SET(gpio) \
- EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio))
-#define EXTENDED_CLR(gpio) \
- EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio))
-
-#define EXTENDED_FULL_MASK (0xffffffff)
-
-/* -- API inline-functions -- */
-
-/*
- * Gets the current value of the specified pin
- */
-static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio)
-{
- u32 pinhi_mask = 0, pinhi_mask2 = 0;
-
- if (gpio >= MSP_NUM_GPIOS)
- return MSP_GPIO_NONE;
-
- if (gpio < 16) {
- pinhi_mask = BASIC_DATA_MASK(gpio);
- } else {
- /*
- * Two cases are possible with the EXTENDED register:
- * - In output mode (ENABLED flag set), check the CLR bit
- * - In input mode (ENABLED flag not set), check the SET bit
- */
- pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio);
- pinhi_mask2 = EXTENDED_SET(gpio);
- }
- if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) ||
- (*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2))
- return MSP_GPIO_HI;
- else
- return MSP_GPIO_LO;
-}
-
-/* Sets the specified pin to the specified value */
-static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio)
-{
- if (gpio >= MSP_NUM_GPIOS)
- return;
-
- if (gpio < 16) {
- if (data == MSP_GPIO_TOGGLE)
- toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- BASIC_DATA_MASK(gpio));
- else if (data == MSP_GPIO_HI)
- set_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- BASIC_DATA_MASK(gpio));
- else
- clear_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- BASIC_DATA_MASK(gpio));
- } else {
- if (data == MSP_GPIO_TOGGLE) {
- /* Special ugly case:
- * We have to read the CLR bit.
- * If set, we write the CLR bit.
- * If not, we write the SET bit.
- */
- u32 tmpdata;
-
- custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- tmpdata);
- if (tmpdata & EXTENDED_CLR(gpio))
- tmpdata = EXTENDED_CLR(gpio);
- else
- tmpdata = EXTENDED_SET(gpio);
- custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- tmpdata);
- } else {
- u32 newdata;
-
- if (data == MSP_GPIO_HI)
- newdata = EXTENDED_SET(gpio);
- else
- newdata = EXTENDED_CLR(gpio);
- set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- EXTENDED_FULL_MASK, newdata);
- }
- }
-}
-
-/* Sets the specified pin to the specified value */
-static inline void msp_gpio_pin_hi(unsigned int gpio)
-{
- msp_gpio_pin_set(MSP_GPIO_HI, gpio);
-}
-
-/* Sets the specified pin to the specified value */
-static inline void msp_gpio_pin_lo(unsigned int gpio)
-{
- msp_gpio_pin_set(MSP_GPIO_LO, gpio);
-}
-
-/* Sets the specified pin to the opposite value */
-static inline void msp_gpio_pin_toggle(unsigned int gpio)
-{
- msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio);
-}
-
-/* Gets the mode of the specified pin */
-static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio)
-{
- enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN;
- uint32_t data;
-
- if (gpio >= MSP_NUM_GPIOS)
- return retval;
-
- data = *MSP_GPIO_MODE_REGISTER[gpio];
-
- if (gpio < 16) {
- retval = BASIC_MODE_FROM_REG(data, gpio);
- } else {
- /* Extended pins can only be either INPUT or OUTPUT */
- if (data & EXTENDED_ENABLE(gpio))
- retval = MSP_GPIO_OUTPUT;
- else
- retval = MSP_GPIO_INPUT;
- }
-
- return retval;
-}
-
-/*
- * Sets the specified mode on the requested pin
- * Returns 0 on success, or -1 if that mode is not allowed on this pin
- */
-static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio)
-{
- u32 modemask, newmode;
-
- if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode])
- return -1;
-
- if (gpio >= MSP_NUM_GPIOS)
- return -1;
-
- if (gpio < 16) {
- modemask = BASIC_MODE_MASK(gpio);
- newmode = BASIC_MODE(mode, gpio);
- } else {
- modemask = EXTENDED_FULL_MASK;
- if (mode == MSP_GPIO_INPUT)
- newmode = EXTENDED_DISABLE(gpio);
- else
- newmode = EXTENDED_ENABLE(gpio);
- }
- /* Do the set atomically */
- set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode);
-
- return 0;
-}
-
-#endif /* __MSP_GPIO_MACROS_H__ */