diff options
Diffstat (limited to '')
-rw-r--r-- | arch/sh/boot/compressed/Makefile | 7 | ||||
-rw-r--r-- | arch/sh/include/asm/checksum_32.h | 1 | ||||
-rw-r--r-- | arch/sh/include/asm/gpio.h | 5 | ||||
-rw-r--r-- | arch/sh/include/asm/page.h | 3 | ||||
-rw-r--r-- | arch/sh/include/asm/pgtable-3level.h | 2 | ||||
-rw-r--r-- | arch/sh/include/asm/pgtable_32.h | 53 | ||||
-rw-r--r-- | arch/sh/kernel/cpu/sh4/sq.c | 2 | ||||
-rw-r--r-- | arch/sh/kernel/idle.c | 1 | ||||
-rw-r--r-- | arch/sh/kernel/vmlinux.lds.S | 2 | ||||
-rw-r--r-- | arch/sh/mm/init.c | 1 |
10 files changed, 47 insertions, 30 deletions
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index 591125c42d49..b5e29f99c02c 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -8,13 +8,6 @@ OBJECTS := head_32.o misc.o cache.o piggy.o \ ashiftrt.o ashldi3.o ashrsi3.o ashlsi3.o lshrsi3.o -# These were previously generated files. When you are building the kernel -# with O=, make sure to remove the stale files in the output tree. Otherwise, -# the build system wrongly compiles the stale ones. -ifdef building_out_of_srctree -$(shell rm -f $(addprefix $(obj)/, ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S)) -endif - targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \ vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS) diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h index a6501b856f3e..2b5fa75b4651 100644 --- a/arch/sh/include/asm/checksum_32.h +++ b/arch/sh/include/asm/checksum_32.h @@ -7,6 +7,7 @@ */ #include <linux/in6.h> +#include <linux/uaccess.h> /* * computes the checksum of a memory block at buff, length len, diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h index d643250f0a0f..588c1380e4cb 100644 --- a/arch/sh/include/asm/gpio.h +++ b/arch/sh/include/asm/gpio.h @@ -40,11 +40,6 @@ static inline int gpio_to_irq(unsigned gpio) return __gpio_to_irq(gpio); } -static inline int irq_to_gpio(unsigned int irq) -{ - return -ENOSYS; -} - #endif /* CONFIG_GPIOLIB */ #endif /* __ASM_SH_GPIO_H */ diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h index eca5daa43b93..09ac6c7faee0 100644 --- a/arch/sh/include/asm/page.h +++ b/arch/sh/include/asm/page.h @@ -169,9 +169,6 @@ typedef struct page *pgtable_t; #define PFN_START (__MEMORY_START >> PAGE_SHIFT) #define ARCH_PFN_OFFSET (PFN_START) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#ifdef CONFIG_FLATMEM -#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) -#endif #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #include <asm-generic/memory_model.h> diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h index a889a3a938ba..d1ce73f3bd85 100644 --- a/arch/sh/include/asm/pgtable-3level.h +++ b/arch/sh/include/asm/pgtable-3level.h @@ -28,7 +28,7 @@ #define pmd_ERROR(e) \ printk("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e)) -typedef struct { +typedef union { struct { unsigned long pmd_low; unsigned long pmd_high; diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h index d0240decacca..21952b094650 100644 --- a/arch/sh/include/asm/pgtable_32.h +++ b/arch/sh/include/asm/pgtable_32.h @@ -423,40 +423,69 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd) #endif /* - * Encode and de-code a swap entry + * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that + * are !pte_none() && !pte_present(). * * Constraints: * _PAGE_PRESENT at bit 8 * _PAGE_PROTNONE at bit 9 * - * For the normal case, we encode the swap type into bits 0:7 and the - * swap offset into bits 10:30. For the 64-bit PTE case, we keep the - * preserved bits in the low 32-bits and use the upper 32 as the swap - * offset (along with a 5-bit type), following the same approach as x86 - * PAE. This keeps the logic quite simple. + * For the normal case, we encode the swap type and offset into the swap PTE + * such that bits 8 and 9 stay zero. For the 64-bit PTE case, we use the + * upper 32 for the swap offset and swap type, following the same approach as + * x86 PAE. This keeps the logic quite simple. * * As is evident by the Alpha code, if we ever get a 64-bit unsigned * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes * much cleaner.. - * - * NOTE: We should set ZEROs at the position of _PAGE_PRESENT - * and _PAGE_PROTNONE bits */ + #ifdef CONFIG_X2TLB +/* + * Format of swap PTEs: + * + * 6 6 6 6 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3 + * 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 + * <--------------------- offset ----------------------> < type -> + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <------------------- zeroes --------------------> E 0 0 0 0 0 0 + */ #define __swp_type(x) ((x).val & 0x1f) #define __swp_offset(x) ((x).val >> 5) -#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) +#define __swp_entry(type, offset) ((swp_entry_t){ ((type) & 0x1f) | (offset) << 5}) #define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) #define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) #else -#define __swp_type(x) ((x).val & 0xff) +/* + * Format of swap PTEs: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <--------------- offset ----------------> 0 0 0 0 E < type -> 0 + * + * E is the exclusive marker that is not stored in swap entries. + */ +#define __swp_type(x) ((x).val & 0x1f) #define __swp_offset(x) ((x).val >> 10) -#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) +#define __swp_entry(type, offset) ((swp_entry_t){((type) & 0x1f) | (offset) << 10}) #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) #endif +/* In both cases, we borrow bit 6 to store the exclusive marker in swap PTEs. */ +#define _PAGE_SWP_EXCLUSIVE _PAGE_USER + +static inline int pte_swp_exclusive(pte_t pte) +{ + return pte.pte_low & _PAGE_SWP_EXCLUSIVE; +} + +PTE_BIT_FUNC(low, swp_mkexclusive, |= _PAGE_SWP_EXCLUSIVE); +PTE_BIT_FUNC(low, swp_clear_exclusive, &= ~_PAGE_SWP_EXCLUSIVE); + #endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_PGTABLE_32_H */ diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index a76b94e41e91..27f2e3da5aa2 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -103,7 +103,7 @@ static int __sq_remap(struct sq_mapping *map, pgprot_t prot) #if defined(CONFIG_MMU) struct vm_struct *vma; - vma = __get_vm_area_caller(map->size, VM_ALLOC, map->sq_addr, + vma = __get_vm_area_caller(map->size, VM_IOREMAP, map->sq_addr, SQ_ADDRMAX, __builtin_return_address(0)); if (!vma) return -ENOMEM; diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index f59814983bd5..3418c40f0099 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -25,6 +25,7 @@ void default_idle(void) raw_local_irq_enable(); /* Isn't this racy ? */ cpu_sleep(); + raw_local_irq_disable(); clear_bl_bit(); } diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 3161b9ccd2a5..9644fe187a3f 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -4,6 +4,7 @@ * Written by Niibe Yutaka and Paul Mundt */ OUTPUT_ARCH(sh) +#define RUNTIME_DISCARD_EXIT #include <asm/thread_info.h> #include <asm/cache.h> #include <asm/vmlinux.lds.h> @@ -29,7 +30,6 @@ SECTIONS HEAD_TEXT TEXT_TEXT SCHED_TEXT - CPUIDLE_TEXT LOCK_TEXT KPROBES_TEXT IRQENTRY_TEXT diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 506784702430..bf1b54055316 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -301,6 +301,7 @@ void __init paging_init(void) */ max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT; min_low_pfn = __MEMORY_START >> PAGE_SHIFT; + set_max_mapnr(max_low_pfn - min_low_pfn); nodes_clear(node_online_map); |