diff options
Diffstat (limited to 'arch/x86/entry/entry_64.S')
| -rw-r--r-- | arch/x86/entry/entry_64.S | 840 |
1 files changed, 213 insertions, 627 deletions
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index eead1e2bebd5..d2a00c97e53f 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -16,7 +16,6 @@ * * Some macro usage: * - SYM_FUNC_START/END:Define functions in the symbol table. - * - TRACE_IRQ_*: Trace hardirq state for lock debugging. * - idtentry: Define exception entry points. */ #include <linux/linkage.h> @@ -37,6 +36,7 @@ #include <asm/pgtable_types.h> #include <asm/export.h> #include <asm/frame.h> +#include <asm/trapnr.h> #include <asm/nospec-branch.h> #include <linux/err.h> @@ -53,57 +53,6 @@ SYM_CODE_START(native_usergs_sysret64) SYM_CODE_END(native_usergs_sysret64) #endif /* CONFIG_PARAVIRT */ -.macro TRACE_IRQS_FLAGS flags:req -#ifdef CONFIG_TRACE_IRQFLAGS - btl $9, \flags /* interrupts off? */ - jnc 1f - TRACE_IRQS_ON -1: -#endif -.endm - -.macro TRACE_IRQS_IRETQ - TRACE_IRQS_FLAGS EFLAGS(%rsp) -.endm - -/* - * When dynamic function tracer is enabled it will add a breakpoint - * to all locations that it is about to modify, sync CPUs, update - * all the code, sync CPUs, then remove the breakpoints. In this time - * if lockdep is enabled, it might jump back into the debug handler - * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF). - * - * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to - * make sure the stack pointer does not get reset back to the top - * of the debug stack, and instead just reuses the current stack. - */ -#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS) - -.macro TRACE_IRQS_OFF_DEBUG - call debug_stack_set_zero - TRACE_IRQS_OFF - call debug_stack_reset -.endm - -.macro TRACE_IRQS_ON_DEBUG - call debug_stack_set_zero - TRACE_IRQS_ON - call debug_stack_reset -.endm - -.macro TRACE_IRQS_IRETQ_DEBUG - btl $9, EFLAGS(%rsp) /* interrupts off? */ - jnc 1f - TRACE_IRQS_ON_DEBUG -1: -.endm - -#else -# define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF -# define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON -# define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ -#endif - /* * 64-bit SYSCALL instruction entry. Up to 6 arguments in registers. * @@ -144,11 +93,6 @@ SYM_CODE_END(native_usergs_sysret64) SYM_CODE_START(entry_SYSCALL_64) UNWIND_HINT_EMPTY - /* - * Interrupts are off on entry. - * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, - * it is too small to ever cause noticeable irq latency. - */ swapgs /* tss.sp2 is scratch space. */ @@ -167,15 +111,11 @@ SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL) PUSH_AND_CLEAR_REGS rax=$-ENOSYS - TRACE_IRQS_OFF - /* IRQs are off. */ movq %rax, %rdi movq %rsp, %rsi call do_syscall_64 /* returns with IRQs disabled */ - TRACE_IRQS_ON /* return enables interrupts */ - /* * Try to use SYSRET instead of IRET if we're returning to * a completely clean 64-bit userspace context. If we're not, @@ -279,6 +219,7 @@ SYM_CODE_END(entry_SYSCALL_64) * %rdi: prev task * %rsi: next task */ +.pushsection .text, "ax" SYM_FUNC_START(__switch_to_asm) /* * Save callee-saved registers @@ -321,6 +262,7 @@ SYM_FUNC_START(__switch_to_asm) jmp __switch_to SYM_FUNC_END(__switch_to_asm) +.popsection /* * A newly forked process directly context switches into this address. @@ -329,6 +271,7 @@ SYM_FUNC_END(__switch_to_asm) * rbx: kernel thread func (NULL for user thread) * r12: kernel thread arg */ +.pushsection .text, "ax" SYM_CODE_START(ret_from_fork) UNWIND_HINT_EMPTY movq %rax, %rdi @@ -341,7 +284,6 @@ SYM_CODE_START(ret_from_fork) UNWIND_HINT_REGS movq %rsp, %rdi call syscall_return_slowpath /* returns with IRQs disabled */ - TRACE_IRQS_ON /* user mode is traced as IRQS on */ jmp swapgs_restore_regs_and_return_to_usermode 1: @@ -357,34 +299,7 @@ SYM_CODE_START(ret_from_fork) movq $0, RAX(%rsp) jmp 2b SYM_CODE_END(ret_from_fork) - -/* - * Build the entry stubs with some assembler magic. - * We pack 1 stub into every 8-byte block. - */ - .align 8 -SYM_CODE_START(irq_entries_start) - vector=FIRST_EXTERNAL_VECTOR - .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) - UNWIND_HINT_IRET_REGS - pushq $(~vector+0x80) /* Note: always in signed byte range */ - jmp common_interrupt - .align 8 - vector=vector+1 - .endr -SYM_CODE_END(irq_entries_start) - - .align 8 -SYM_CODE_START(spurious_entries_start) - vector=FIRST_SYSTEM_VECTOR - .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR) - UNWIND_HINT_IRET_REGS - pushq $(~vector+0x80) /* Note: always in signed byte range */ - jmp common_spurious - .align 8 - vector=vector+1 - .endr -SYM_CODE_END(spurious_entries_start) +.popsection .macro DEBUG_ENTRY_ASSERT_IRQS_OFF #ifdef CONFIG_DEBUG_ENTRY @@ -398,228 +313,185 @@ SYM_CODE_END(spurious_entries_start) #endif .endm -/* - * Enters the IRQ stack if we're not already using it. NMI-safe. Clobbers - * flags and puts old RSP into old_rsp, and leaves all other GPRs alone. - * Requires kernel GSBASE. - * - * The invariant is that, if irq_count != -1, then the IRQ stack is in use. +/** + * idtentry_body - Macro to emit code calling the C function + * @cfunc: C function to be called + * @has_error_code: Hardware pushed error code on stack */ -.macro ENTER_IRQ_STACK regs=1 old_rsp save_ret=0 - DEBUG_ENTRY_ASSERT_IRQS_OFF +.macro idtentry_body cfunc has_error_code:req - .if \save_ret - /* - * If save_ret is set, the original stack contains one additional - * entry -- the return address. Therefore, move the address one - * entry below %rsp to \old_rsp. - */ - leaq 8(%rsp), \old_rsp - .else - movq %rsp, \old_rsp - .endif - - .if \regs - UNWIND_HINT_REGS base=\old_rsp - .endif + call error_entry + UNWIND_HINT_REGS - incl PER_CPU_VAR(irq_count) - jnz .Lirq_stack_push_old_rsp_\@ + movq %rsp, %rdi /* pt_regs pointer into 1st argument*/ - /* - * Right now, if we just incremented irq_count to zero, we've - * claimed the IRQ stack but we haven't switched to it yet. - * - * If anything is added that can interrupt us here without using IST, - * it must be *extremely* careful to limit its stack usage. This - * could include kprobes and a hypothetical future IST-less #DB - * handler. - * - * The OOPS unwinder relies on the word at the top of the IRQ - * stack linking back to the previous RSP for the entire time we're - * on the IRQ stack. For this to work reliably, we need to write - * it before we actually move ourselves to the IRQ stack. - */ + .if \has_error_code == 1 + movq ORIG_RAX(%rsp), %rsi /* get error code into 2nd argument*/ + movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */ + .endif - movq \old_rsp, PER_CPU_VAR(irq_stack_backing_store + IRQ_STACK_SIZE - 8) - movq PER_CPU_VAR(hardirq_stack_ptr), %rsp + call \cfunc -#ifdef CONFIG_DEBUG_ENTRY - /* - * If the first movq above becomes wrong due to IRQ stack layout - * changes, the only way we'll notice is if we try to unwind right - * here. Assert that we set up the stack right to catch this type - * of bug quickly. - */ - cmpq -8(%rsp), \old_rsp - je .Lirq_stack_okay\@ - ud2 - .Lirq_stack_okay\@: -#endif + jmp error_return +.endm -.Lirq_stack_push_old_rsp_\@: - pushq \old_rsp +/** + * idtentry - Macro to generate entry stubs for simple IDT entries + * @vector: Vector number + * @asmsym: ASM symbol for the entry point + * @cfunc: C function to be called + * @has_error_code: Hardware pushed error code on stack + * + * The macro emits code to set up the kernel context for straight forward + * and simple IDT entries. No IST stack, no paranoid entry checks. + */ +.macro idtentry vector asmsym cfunc has_error_code:req +SYM_CODE_START(\asmsym) + UNWIND_HINT_IRET_REGS offset=\has_error_code*8 + ASM_CLAC - .if \regs - UNWIND_HINT_REGS indirect=1 + .if \has_error_code == 0 + pushq $-1 /* ORIG_RAX: no syscall to restart */ .endif - .if \save_ret - /* - * Push the return address to the stack. This return address can - * be found at the "real" original RSP, which was offset by 8 at - * the beginning of this macro. - */ - pushq -8(\old_rsp) + .if \vector == X86_TRAP_BP + /* + * If coming from kernel space, create a 6-word gap to allow the + * int3 handler to emulate a call instruction. + */ + testb $3, CS-ORIG_RAX(%rsp) + jnz .Lfrom_usermode_no_gap_\@ + .rept 6 + pushq 5*8(%rsp) + .endr + UNWIND_HINT_IRET_REGS offset=8 +.Lfrom_usermode_no_gap_\@: .endif + + idtentry_body \cfunc \has_error_code + +_ASM_NOKPROBE(\asmsym) +SYM_CODE_END(\asmsym) .endm /* - * Undoes ENTER_IRQ_STACK. + * Interrupt entry/exit. + * + + The interrupt stubs push (vector) onto the stack, which is the error_code + * position of idtentry exceptions, and jump to one of the two idtentry points + * (common/spurious). + * + * common_interrupt is a hotpath, align it to a cache line */ -.macro LEAVE_IRQ_STACK regs=1 - DEBUG_ENTRY_ASSERT_IRQS_OFF - /* We need to be off the IRQ stack before decrementing irq_count. */ - popq %rsp - - .if \regs - UNWIND_HINT_REGS - .endif - - /* - * As in ENTER_IRQ_STACK, irq_count == 0, we are still claiming - * the irq stack but we're not on it. - */ - - decl PER_CPU_VAR(irq_count) +.macro idtentry_irq vector cfunc + .p2align CONFIG_X86_L1_CACHE_SHIFT + idtentry \vector asm_\cfunc \cfunc has_error_code=1 .endm /* - * Interrupt entry helper function. + * System vectors which invoke their handlers directly and are not + * going through the regular common device interrupt handling code. + */ +.macro idtentry_sysvec vector cfunc + idtentry \vector asm_\cfunc \cfunc has_error_code=0 +.endm + +/** + * idtentry_mce_db - Macro to generate entry stubs for #MC and #DB + * @vector: Vector number + * @asmsym: ASM symbol for the entry point + * @cfunc: C function to be called + * + * The macro emits code to set up the kernel context for #MC and #DB + * + * If the entry comes from user space it uses the normal entry path + * including the return to user space work and preemption checks on + * exit. * - * Entry runs with interrupts off. Stack layout at entry: - * +----------------------------------------------------+ - * | regs->ss | - * | regs->rsp | - * | regs->eflags | - * | regs->cs | - * | regs->ip | - * +----------------------------------------------------+ - * | regs->orig_ax = ~(interrupt number) | - * +----------------------------------------------------+ - * | return address | - * +----------------------------------------------------+ + * If hits in kernel mode then it needs to go through the paranoid + * entry as the exception can hit any random state. No preemption + * check on exit to keep the paranoid path simple. */ -SYM_CODE_START(interrupt_entry) - UNWIND_HINT_IRET_REGS offset=16 +.macro idtentry_mce_db vector asmsym cfunc +SYM_CODE_START(\asmsym) + UNWIND_HINT_IRET_REGS ASM_CLAC - cld - testb $3, CS-ORIG_RAX+8(%rsp) - jz 1f - SWAPGS - FENCE_SWAPGS_USER_ENTRY + pushq $-1 /* ORIG_RAX: no syscall to restart */ + /* - * Switch to the thread stack. The IRET frame and orig_ax are - * on the stack, as well as the return address. RDI..R12 are - * not (yet) on the stack and space has not (yet) been - * allocated for them. + * If the entry is from userspace, switch stacks and treat it as + * a normal entry. */ - pushq %rdi + testb $3, CS-ORIG_RAX(%rsp) + jnz .Lfrom_usermode_switch_stack_\@ - /* Need to switch before accessing the thread stack. */ - SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi - movq %rsp, %rdi - movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp + /* + * paranoid_entry returns SWAPGS flag for paranoid_exit in EBX. + * EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS + */ + call paranoid_entry - /* - * We have RDI, return address, and orig_ax on the stack on - * top of the IRET frame. That means offset=24 - */ - UNWIND_HINT_IRET_REGS base=%rdi offset=24 - - pushq 7*8(%rdi) /* regs->ss */ - pushq 6*8(%rdi) /* regs->rsp */ - pushq 5*8(%rdi) /* regs->eflags */ - pushq 4*8(%rdi) /* regs->cs */ - pushq 3*8(%rdi) /* regs->ip */ - UNWIND_HINT_IRET_REGS - pushq 2*8(%rdi) /* regs->orig_ax */ - pushq 8(%rdi) /* return address */ + UNWIND_HINT_REGS - movq (%rdi), %rdi - jmp 2f -1: - FENCE_SWAPGS_KERNEL_ENTRY -2: - PUSH_AND_CLEAR_REGS save_ret=1 - ENCODE_FRAME_POINTER 8 + movq %rsp, %rdi /* pt_regs pointer */ - testb $3, CS+8(%rsp) - jz 1f + call \cfunc - /* - * IRQ from user mode. - * - * We need to tell lockdep that IRQs are off. We can't do this until - * we fix gsbase, and we should do it before enter_from_user_mode - * (which can take locks). Since TRACE_IRQS_OFF is idempotent, - * the simplest way to handle it is to just call it twice if - * we enter from user mode. There's no reason to optimize this since - * TRACE_IRQS_OFF is a no-op if lockdep is off. - */ - TRACE_IRQS_OFF + jmp paranoid_exit - CALL_enter_from_user_mode + /* Switch to the regular task stack and use the noist entry point */ +.Lfrom_usermode_switch_stack_\@: + idtentry_body noist_\cfunc, has_error_code=0 -1: - ENTER_IRQ_STACK old_rsp=%rdi save_ret=1 - /* We entered an interrupt context - irqs are off: */ - TRACE_IRQS_OFF +_ASM_NOKPROBE(\asmsym) +SYM_CODE_END(\asmsym) +.endm - ret -SYM_CODE_END(interrupt_entry) -_ASM_NOKPROBE(interrupt_entry) +/* + * Double fault entry. Straight paranoid. No checks from which context + * this comes because for the espfix induced #DF this would do the wrong + * thing. + */ +.macro idtentry_df vector asmsym cfunc +SYM_CODE_START(\asmsym) + UNWIND_HINT_IRET_REGS offset=8 + ASM_CLAC + /* + * paranoid_entry returns SWAPGS flag for paranoid_exit in EBX. + * EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS + */ + call paranoid_entry + UNWIND_HINT_REGS -/* Interrupt entry/exit. */ + movq %rsp, %rdi /* pt_regs pointer into first argument */ + movq ORIG_RAX(%rsp), %rsi /* get error code into 2nd argument*/ + movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */ + call \cfunc + + jmp paranoid_exit + +_ASM_NOKPROBE(\asmsym) +SYM_CODE_END(\asmsym) +.endm /* - * The interrupt stubs push (~vector+0x80) onto the stack and - * then jump to common_spurious/interrupt. + * Include the defines which emit the idt entries which are shared + * shared between 32 and 64 bit and emit the __irqentry_text_* markers + * so the stacktrace boundary checks work. */ -SYM_CODE_START_LOCAL(common_spurious) - addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */ - call interrupt_entry - UNWIND_HINT_REGS indirect=1 - call smp_spurious_interrupt /* rdi points to pt_regs */ - jmp ret_from_intr -SYM_CODE_END(common_spurious) -_ASM_NOKPROBE(common_spurious) - -/* common_interrupt is a hotpath. Align it */ - .p2align CONFIG_X86_L1_CACHE_SHIFT -SYM_CODE_START_LOCAL(common_interrupt) - addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */ - call interrupt_entry - UNWIND_HINT_REGS indirect=1 - call do_IRQ /* rdi points to pt_regs */ - /* 0(%rsp): old RSP */ -ret_from_intr: - DISABLE_INTERRUPTS(CLBR_ANY) - TRACE_IRQS_OFF - - LEAVE_IRQ_STACK + .align 16 + .globl __irqentry_text_start +__irqentry_text_start: - testb $3, CS(%rsp) - jz retint_kernel +#include <asm/idtentry.h> - /* Interrupt came from user space */ -.Lretint_user: - mov %rsp,%rdi - call prepare_exit_to_usermode - TRACE_IRQS_ON + .align 16 + .globl __irqentry_text_end +__irqentry_text_end: +SYM_CODE_START_LOCAL(common_interrupt_return) SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL) #ifdef CONFIG_DEBUG_ENTRY /* Assert that pt_regs indicates user mode. */ @@ -662,23 +534,6 @@ SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL) INTERRUPT_RETURN -/* Returning to kernel space */ -retint_kernel: -#ifdef CONFIG_PREEMPTION - /* Interrupts are off */ - /* Check if we need preemption */ - btl $9, EFLAGS(%rsp) /* were interrupts off? */ - jnc 1f - cmpl $0, PER_CPU_VAR(__preempt_count) - jnz 1f - call preempt_schedule_irq -1: -#endif - /* - * The iretq could re-enable interrupts: - */ - TRACE_IRQS_IRETQ - SYM_INNER_LABEL(restore_regs_and_return_to_kernel, SYM_L_GLOBAL) #ifdef CONFIG_DEBUG_ENTRY /* Assert that pt_regs indicates kernel mode. */ @@ -710,7 +565,7 @@ SYM_INNER_LABEL(native_irq_return_iret, SYM_L_GLOBAL) /* * This may fault. Non-paranoid faults on return to userspace are * handled by fixup_bad_iret. These include #SS, #GP, and #NP. - * Double-faults due to espfix64 are handled in do_double_fault. + * Double-faults due to espfix64 are handled in exc_double_fault. * Other faults here are fatal. */ iretq @@ -788,280 +643,32 @@ native_irq_return_ldt: */ jmp native_irq_return_iret #endif -SYM_CODE_END(common_interrupt) -_ASM_NOKPROBE(common_interrupt) - -/* - * APIC interrupts. - */ -.macro apicinterrupt3 num sym do_sym -SYM_CODE_START(\sym) - UNWIND_HINT_IRET_REGS - pushq $~(\num) -.Lcommon_\sym: - call interrupt_entry - UNWIND_HINT_REGS indirect=1 - call \do_sym /* rdi points to pt_regs */ - jmp ret_from_intr -SYM_CODE_END(\sym) -_ASM_NOKPROBE(\sym) -.endm - -/* Make sure APIC interrupt handlers end up in the irqentry section: */ -#define PUSH_SECTION_IRQENTRY .pushsection .irqentry.text, "ax" -#define POP_SECTION_IRQENTRY .popsection - -.macro apicinterrupt num sym do_sym -PUSH_SECTION_IRQENTRY -apicinterrupt3 \num \sym \do_sym -POP_SECTION_IRQENTRY -.endm - -#ifdef CONFIG_SMP -apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt -apicinterrupt3 REBOOT_VECTOR reboot_interrupt smp_reboot_interrupt -#endif - -#ifdef CONFIG_X86_UV -apicinterrupt3 UV_BAU_MESSAGE uv_bau_message_intr1 uv_bau_message_interrupt -#endif - -apicinterrupt LOCAL_TIMER_VECTOR apic_timer_interrupt smp_apic_timer_interrupt -apicinterrupt X86_PLATFORM_IPI_VECTOR x86_platform_ipi smp_x86_platform_ipi - -#ifdef CONFIG_HAVE_KVM -apicinterrupt3 POSTED_INTR_VECTOR kvm_posted_intr_ipi smp_kvm_posted_intr_ipi -apicinterrupt3 POSTED_INTR_WAKEUP_VECTOR kvm_posted_intr_wakeup_ipi smp_kvm_posted_intr_wakeup_ipi -apicinterrupt3 POSTED_INTR_NESTED_VECTOR kvm_posted_intr_nested_ipi smp_kvm_posted_intr_nested_ipi -#endif - -#ifdef CONFIG_X86_MCE_THRESHOLD -apicinterrupt THRESHOLD_APIC_VECTOR threshold_interrupt smp_threshold_interrupt -#endif - -#ifdef CONFIG_X86_MCE_AMD -apicinterrupt DEFERRED_ERROR_VECTOR deferred_error_interrupt smp_deferred_error_interrupt -#endif - -#ifdef CONFIG_X86_THERMAL_VECTOR -apicinterrupt THERMAL_APIC_VECTOR thermal_interrupt smp_thermal_interrupt -#endif - -#ifdef CONFIG_SMP -apicinterrupt CALL_FUNCTION_SINGLE_VECTOR call_function_single_interrupt smp_call_function_single_interrupt -apicinterrupt CALL_FUNCTION_VECTOR call_function_interrupt smp_call_function_interrupt -apicinterrupt RESCHEDULE_VECTOR reschedule_interrupt smp_reschedule_interrupt -#endif - -apicinterrupt ERROR_APIC_VECTOR error_interrupt smp_error_interrupt -apicinterrupt SPURIOUS_APIC_VECTOR spurious_interrupt smp_spurious_interrupt - -#ifdef CONFIG_IRQ_WORK -apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt -#endif +SYM_CODE_END(common_interrupt_return) +_ASM_NOKPROBE(common_interrupt_return) /* - * Exception entry points. - */ -#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + (x) * 8) - -.macro idtentry_part do_sym, has_error_code:req, read_cr2:req, paranoid:req, shift_ist=-1, ist_offset=0 - - .if \paranoid - call paranoid_entry - /* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */ - .else - call error_entry - .endif - UNWIND_HINT_REGS - - .if \read_cr2 - /* - * Store CR2 early so subsequent faults cannot clobber it. Use R12 as - * intermediate storage as RDX can be clobbered in enter_from_user_mode(). - * GET_CR2_INTO can clobber RAX. - */ - GET_CR2_INTO(%r12); - .endif - - .if \shift_ist != -1 - TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */ - .else - TRACE_IRQS_OFF - .endif - - .if \paranoid == 0 - testb $3, CS(%rsp) - jz .Lfrom_kernel_no_context_tracking_\@ - CALL_enter_from_user_mode -.Lfrom_kernel_no_context_tracking_\@: - .endif - - movq %rsp, %rdi /* pt_regs pointer */ - - .if \has_error_code - movq ORIG_RAX(%rsp), %rsi /* get error code */ - movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */ - .else - xorl %esi, %esi /* no error code */ - .endif - - .if \shift_ist != -1 - subq $\ist_offset, CPU_TSS_IST(\shift_ist) - .endif - - .if \read_cr2 - movq %r12, %rdx /* Move CR2 into 3rd argument */ - .endif - - call \do_sym - - .if \shift_ist != -1 - addq $\ist_offset, CPU_TSS_IST(\shift_ist) - .endif - - .if \paranoid - /* this procedure expect "no swapgs" flag in ebx */ - jmp paranoid_exit - .else - jmp error_exit - .endif - -.endm - -/** - * idtentry - Generate an IDT entry stub - * @sym: Name of the generated entry point - * @do_sym: C function to be called - * @has_error_code: True if this IDT vector has an error code on the stack - * @paranoid: non-zero means that this vector may be invoked from - * kernel mode with user GSBASE and/or user CR3. - * 2 is special -- see below. - * @shift_ist: Set to an IST index if entries from kernel mode should - * decrement the IST stack so that nested entries get a - * fresh stack. (This is for #DB, which has a nasty habit - * of recursing.) - * @create_gap: create a 6-word stack gap when coming from kernel mode. - * @read_cr2: load CR2 into the 3rd argument; done before calling any C code - * - * idtentry generates an IDT stub that sets up a usable kernel context, - * creates struct pt_regs, and calls @do_sym. The stub has the following - * special behaviors: - * - * On an entry from user mode, the stub switches from the trampoline or - * IST stack to the normal thread stack. On an exit to user mode, the - * normal exit-to-usermode path is invoked. - * - * On an exit to kernel mode, if @paranoid == 0, we check for preemption, - * whereas we omit the preemption check if @paranoid != 0. This is purely - * because the implementation is simpler this way. The kernel only needs - * to check for asynchronous kernel preemption when IRQ handlers return. - * - * If @paranoid == 0, then the stub will handle IRET faults by pretending - * that the fault came from user mode. It will handle gs_change faults by - * pretending that the fault happened with kernel GSBASE. Since this handling - * is omitted for @paranoid != 0, the #GP, #SS, and #NP stubs must have - * @paranoid == 0. This special handling will do the wrong thing for - * espfix-induced #DF on IRET, so #DF must not use @paranoid == 0. + * Reload gs selector with exception handling + * edi: new selector * - * @paranoid == 2 is special: the stub will never switch stacks. This is for - * #DF: if the thread stack is somehow unusable, we'll still get a useful OOPS. + * Is in entry.text as it shouldn't be instrumented. */ -.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ist_offset=0 create_gap=0 read_cr2=0 -SYM_CODE_START(\sym) - UNWIND_HINT_IRET_REGS offset=\has_error_code*8 - - /* Sanity check */ - .if \shift_ist != -1 && \paranoid != 1 - .error "using shift_ist requires paranoid=1" - .endif - - .if \create_gap && \paranoid - .error "using create_gap requires paranoid=0" - .endif - - ASM_CLAC - - .if \has_error_code == 0 - pushq $-1 /* ORIG_RAX: no syscall to restart */ - .endif - - .if \paranoid == 1 - testb $3, CS-ORIG_RAX(%rsp) /* If coming from userspace, switch stacks */ - jnz .Lfrom_usermode_switch_stack_\@ - .endif - - .if \create_gap == 1 - /* - * If coming from kernel space, create a 6-word gap to allow the - * int3 handler to emulate a call instruction. - */ - testb $3, CS-ORIG_RAX(%rsp) - jnz .Lfrom_usermode_no_gap_\@ - .rept 6 - pushq 5*8(%rsp) - .endr - UNWIND_HINT_IRET_REGS offset=8 -.Lfrom_usermode_no_gap_\@: - .endif - - idtentry_part \do_sym, \has_error_code, \read_cr2, \paranoid, \shift_ist, \ist_offset - - .if \paranoid == 1 - /* - * Entry from userspace. Switch stacks and treat it - * as a normal entry. This means that paranoid handlers - * run in real process context if user_mode(regs). - */ -.Lfrom_usermode_switch_stack_\@: - idtentry_part \do_sym, \has_error_code, \read_cr2, paranoid=0 - .endif - -_ASM_NOKPROBE(\sym) -SYM_CODE_END(\sym) -.endm - -idtentry divide_error do_divide_error has_error_code=0 -idtentry overflow do_overflow has_error_code=0 -idtentry bounds do_bounds has_error_code=0 -idtentry invalid_op do_invalid_op has_error_code=0 -idtentry device_not_available do_device_not_available has_error_code=0 -idtentry double_fault do_double_fault has_error_code=1 paranoid=2 read_cr2=1 -idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0 -idtentry invalid_TSS do_invalid_TSS has_error_code=1 -idtentry segment_not_present do_segment_not_present has_error_code=1 -idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0 -idtentry coprocessor_error do_coprocessor_error has_error_code=0 -idtentry alignment_check do_alignment_check has_error_code=1 -idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0 - - - /* - * Reload gs selector with exception handling - * edi: new selector - */ -SYM_FUNC_START(native_load_gs_index) +SYM_FUNC_START(asm_load_gs_index) FRAME_BEGIN - pushfq - DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI) - TRACE_IRQS_OFF - SWAPGS + swapgs .Lgs_change: movl %edi, %gs 2: ALTERNATIVE "", "mfence", X86_BUG_SWAPGS_FENCE - SWAPGS - TRACE_IRQS_FLAGS (%rsp) - popfq + swapgs FRAME_END ret -SYM_FUNC_END(native_load_gs_index) -EXPORT_SYMBOL(native_load_gs_index) +SYM_FUNC_END(asm_load_gs_index) +EXPORT_SYMBOL(asm_load_gs_index) _ASM_EXTABLE(.Lgs_change, .Lbad_gs) .section .fixup, "ax" /* running with kernelgs */ SYM_CODE_START_LOCAL_NOALIGN(.Lbad_gs) - SWAPGS /* switch back to user gs */ + swapgs /* switch back to user gs */ .macro ZAP_GS /* This can't be a string because the preprocessor needs to see it. */ movl $__USER_DS, %eax @@ -1074,20 +681,46 @@ SYM_CODE_START_LOCAL_NOALIGN(.Lbad_gs) SYM_CODE_END(.Lbad_gs) .previous -/* Call softirq on interrupt stack. Interrupts are off. */ -SYM_FUNC_START(do_softirq_own_stack) - pushq %rbp - mov %rsp, %rbp - ENTER_IRQ_STACK regs=0 old_rsp=%r11 - call __do_softirq - LEAVE_IRQ_STACK regs=0 +/* + * rdi: New stack pointer points to the top word of the stack + * rsi: Function pointer + * rdx: Function argument (can be NULL if none) + */ +SYM_FUNC_START(asm_call_on_stack) + /* + * Save the frame pointer unconditionally. This allows the ORC + * unwinder to handle the stack switch. + */ + pushq %rbp + mov %rsp, %rbp + + /* + * The unwinder relies on the word at the top of the new stack + * page linking back to the previous RSP. + */ + mov %rsp, (%rdi) + mov %rdi, %rsp + /* Move the argument to the right place */ + mov %rdx, %rdi + +1: + .pushsection .discard.instr_begin + .long 1b - . + .popsection + + CALL_NOSPEC rsi + +2: + .pushsection .discard.instr_end + .long 2b - . + .popsection + + /* Restore the previous stack pointer from RBP. */ leaveq ret -SYM_FUNC_END(do_softirq_own_stack) +SYM_FUNC_END(asm_call_on_stack) #ifdef CONFIG_XEN_PV -idtentry hypervisor_callback xen_do_hypervisor_callback has_error_code=0 - /* * A note on the "critical region" in our callback handler. * We want to avoid stacking callback handlers due to events occurring @@ -1100,9 +733,10 @@ idtentry hypervisor_callback xen_do_hypervisor_callback has_error_code=0 * So, on entry to the handler we detect whether we interrupted an * existing activation in its critical region -- if so, we pop the current * activation and restart the handler using the previous one. + * + * C calling convention: exc_xen_hypervisor_callback(struct *pt_regs) */ -/* do_hypervisor_callback(struct *pt_regs) */ -SYM_CODE_START_LOCAL(xen_do_hypervisor_callback) +SYM_CODE_START_LOCAL(exc_xen_hypervisor_callback) /* * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will @@ -1112,15 +746,10 @@ SYM_CODE_START_LOCAL(xen_do_hypervisor_callback) movq %rdi, %rsp /* we don't return, adjust the stack frame */ UNWIND_HINT_REGS - ENTER_IRQ_STACK old_rsp=%r10 - call xen_evtchn_do_upcall - LEAVE_IRQ_STACK + call xen_pv_evtchn_do_upcall -#ifndef CONFIG_PREEMPTION - call xen_maybe_preempt_hcall -#endif - jmp error_exit -SYM_CODE_END(xen_do_hypervisor_callback) + jmp error_return +SYM_CODE_END(exc_xen_hypervisor_callback) /* * Hypervisor uses this for application faults while it executes. @@ -1155,7 +784,7 @@ SYM_CODE_START(xen_failsafe_callback) addq $0x30, %rsp pushq $0 /* RIP */ UNWIND_HINT_IRET_REGS offset=8 - jmp general_protection + jmp asm_exc_general_protection 1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */ movq (%rsp), %rcx movq 8(%rsp), %r11 @@ -1164,48 +793,10 @@ SYM_CODE_START(xen_failsafe_callback) pushq $-1 /* orig_ax = -1 => not a system call */ PUSH_AND_CLEAR_REGS ENCODE_FRAME_POINTER - jmp error_exit + jmp error_return SYM_CODE_END(xen_failsafe_callback) #endif /* CONFIG_XEN_PV */ -#ifdef CONFIG_XEN_PVHVM -apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ - xen_hvm_callback_vector xen_evtchn_do_upcall -#endif - - -#if IS_ENABLED(CONFIG_HYPERV) -apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ - hyperv_callback_vector hyperv_vector_handler - -apicinterrupt3 HYPERV_REENLIGHTENMENT_VECTOR \ - hyperv_reenlightenment_vector hyperv_reenlightenment_intr - -apicinterrupt3 HYPERV_STIMER0_VECTOR \ - hv_stimer0_callback_vector hv_stimer0_vector_handler -#endif /* CONFIG_HYPERV */ - -#if IS_ENABLED(CONFIG_ACRN_GUEST) -apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ - acrn_hv_callback_vector acrn_hv_vector_handler -#endif - -idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=IST_INDEX_DB ist_offset=DB_STACK_OFFSET -idtentry int3 do_int3 has_error_code=0 create_gap=1 -idtentry stack_segment do_stack_segment has_error_code=1 - -#ifdef CONFIG_XEN_PV -idtentry xennmi do_nmi has_error_code=0 -idtentry xendebug do_debug has_error_code=0 -#endif - -idtentry general_protection do_general_protection has_error_code=1 -idtentry page_fault do_page_fault has_error_code=1 read_cr2=1 - -#ifdef CONFIG_X86_MCE -idtentry machine_check do_mce has_error_code=0 paranoid=1 -#endif - /* * Save all registers in pt_regs, and switch gs if needed. * Use slow, but surefire "are we in kernel?" check. @@ -1261,17 +852,13 @@ SYM_CODE_END(paranoid_entry) */ SYM_CODE_START_LOCAL(paranoid_exit) UNWIND_HINT_REGS - DISABLE_INTERRUPTS(CLBR_ANY) - TRACE_IRQS_OFF_DEBUG testl %ebx, %ebx /* swapgs needed? */ jnz .Lparanoid_exit_no_swapgs - TRACE_IRQS_IRETQ /* Always restore stashed CR3 value (see paranoid_entry) */ RESTORE_CR3 scratch_reg=%rbx save_reg=%r14 SWAPGS_UNSAFE_STACK jmp restore_regs_and_return_to_kernel .Lparanoid_exit_no_swapgs: - TRACE_IRQS_IRETQ_DEBUG /* Always restore stashed CR3 value (see paranoid_entry) */ RESTORE_CR3 scratch_reg=%rbx save_reg=%r14 jmp restore_regs_and_return_to_kernel @@ -1335,7 +922,6 @@ SYM_CODE_START_LOCAL(error_entry) */ SWAPGS FENCE_SWAPGS_USER_ENTRY - SWITCH_TO_KERNEL_CR3 scratch_reg=%rax jmp .Lerror_entry_done .Lbstep_iret: @@ -1362,14 +948,13 @@ SYM_CODE_START_LOCAL(error_entry) jmp .Lerror_entry_from_usermode_after_swapgs SYM_CODE_END(error_entry) -SYM_CODE_START_LOCAL(error_exit) +SYM_CODE_START_LOCAL(error_return) UNWIND_HINT_REGS - DISABLE_INTERRUPTS(CLBR_ANY) - TRACE_IRQS_OFF + DEBUG_ENTRY_ASSERT_IRQS_OFF testb $3, CS(%rsp) - jz retint_kernel - jmp .Lretint_user -SYM_CODE_END(error_exit) + jz restore_regs_and_return_to_kernel + jmp swapgs_restore_regs_and_return_to_usermode +SYM_CODE_END(error_return) /* * Runs on exception stack. Xen PV does not go through this path at all, @@ -1379,7 +964,7 @@ SYM_CODE_END(error_exit) * %r14: Used to save/restore the CR3 of the interrupted context * when PAGE_TABLE_ISOLATION is in use. Do not clobber. */ -SYM_CODE_START(nmi) +SYM_CODE_START(asm_exc_nmi) UNWIND_HINT_IRET_REGS /* @@ -1464,7 +1049,7 @@ SYM_CODE_START(nmi) movq %rsp, %rdi movq $-1, %rsi - call do_nmi + call exc_nmi /* * Return back to user mode. We must *not* do the normal exit @@ -1521,7 +1106,7 @@ SYM_CODE_START(nmi) * end_repeat_nmi, then we are a nested NMI. We must not * modify the "iret" frame because it's being written by * the outer NMI. That's okay; the outer NMI handler is - * about to about to call do_nmi anyway, so we can just + * about to about to call exc_nmi() anyway, so we can just * resume the outer NMI. */ @@ -1640,7 +1225,7 @@ repeat_nmi: * RSP is pointing to "outermost RIP". gsbase is unknown, but, if * we're repeating an NMI, gsbase has the same value that it had on * the first iteration. paranoid_entry will load the kernel - * gsbase if needed before we call do_nmi. "NMI executing" + * gsbase if needed before we call exc_nmi(). "NMI executing" * is zero. */ movq $1, 10*8(%rsp) /* Set "NMI executing". */ @@ -1674,10 +1259,9 @@ end_repeat_nmi: call paranoid_entry UNWIND_HINT_REGS - /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ movq %rsp, %rdi movq $-1, %rsi - call do_nmi + call exc_nmi /* Always restore stashed CR3 value (see paranoid_entry) */ RESTORE_CR3 scratch_reg=%r15 save_reg=%r14 @@ -1714,7 +1298,7 @@ nmi_restore: * about espfix64 on the way back to kernel mode. */ iretq -SYM_CODE_END(nmi) +SYM_CODE_END(asm_exc_nmi) #ifndef CONFIG_IA32_EMULATION /* @@ -1728,6 +1312,7 @@ SYM_CODE_START(ignore_sysret) SYM_CODE_END(ignore_sysret) #endif +.pushsection .text, "ax" SYM_CODE_START(rewind_stack_do_exit) UNWIND_HINT_FUNC /* Prevent any naive code from trying to unwind to our caller. */ @@ -1739,3 +1324,4 @@ SYM_CODE_START(rewind_stack_do_exit) call do_exit SYM_CODE_END(rewind_stack_do_exit) +.popsection |