aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/kernel/traps.c28
-rw-r--r--arch/mips/ar7/platform.c5
-rw-r--r--arch/mips/ar7/prom.c2
-rw-r--r--arch/mips/kernel/smp-bmips.c4
-rw-r--r--arch/powerpc/kvm/book3s_64_mmu_hv.c10
-rw-r--r--arch/powerpc/kvm/book3s_hv.c29
-rw-r--r--arch/x86/kernel/cpu/Makefile2
-rw-r--r--arch/x86/kernel/cpu/aperfmperf.c11
-rw-r--r--arch/x86/kernel/cpu/proc.c4
-rw-r--r--arch/x86/mm/mem_encrypt.c2
10 files changed, 61 insertions, 36 deletions
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 948c648fea00..0fcd82f01388 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -154,30 +154,26 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
set_fs(fs);
}
-static void dump_instr(const char *lvl, struct pt_regs *regs)
+static void __dump_instr(const char *lvl, struct pt_regs *regs)
{
unsigned long addr = instruction_pointer(regs);
const int thumb = thumb_mode(regs);
const int width = thumb ? 4 : 8;
- mm_segment_t fs;
char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
int i;
/*
- * We need to switch to kernel mode so that we can use __get_user
- * to safely read from kernel space. Note that we now dump the
- * code first, just in case the backtrace kills us.
+ * Note that we now dump the code first, just in case the backtrace
+ * kills us.
*/
- fs = get_fs();
- set_fs(KERNEL_DS);
for (i = -4; i < 1 + !!thumb; i++) {
unsigned int val, bad;
if (thumb)
- bad = __get_user(val, &((u16 *)addr)[i]);
+ bad = get_user(val, &((u16 *)addr)[i]);
else
- bad = __get_user(val, &((u32 *)addr)[i]);
+ bad = get_user(val, &((u32 *)addr)[i]);
if (!bad)
p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
@@ -188,8 +184,20 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
}
}
printk("%sCode: %s\n", lvl, str);
+}
- set_fs(fs);
+static void dump_instr(const char *lvl, struct pt_regs *regs)
+{
+ mm_segment_t fs;
+
+ if (!user_mode(regs)) {
+ fs = get_fs();
+ set_fs(KERNEL_DS);
+ __dump_instr(lvl, regs);
+ set_fs(fs);
+ } else {
+ __dump_instr(lvl, regs);
+ }
}
#ifdef CONFIG_ARM_UNWIND
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index df7acea3747a..4674f1efbe7a 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -575,6 +575,7 @@ static int __init ar7_register_uarts(void)
uart_port.type = PORT_AR7;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
+ uart_port.flags = UPF_FIXED_TYPE;
uart_port.regshift = 2;
uart_port.line = 0;
@@ -653,6 +654,10 @@ static int __init ar7_register_devices(void)
u32 val;
int res;
+ res = ar7_gpio_init();
+ if (res)
+ pr_warn("unable to register gpios: %d\n", res);
+
res = ar7_register_uarts();
if (res)
pr_err("unable to setup uart(s): %d\n", res);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
index 4fd83336131a..dd53987a690f 100644
--- a/arch/mips/ar7/prom.c
+++ b/arch/mips/ar7/prom.c
@@ -246,8 +246,6 @@ void __init prom_init(void)
ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
ar7_init_env((struct env_var *)fw_arg2);
console_config();
-
- ar7_gpio_init();
}
#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 406072e26752..87dcac2447c8 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -591,11 +591,11 @@ void __init bmips_cpu_setup(void)
/* Flush and enable RAC */
cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
- __raw_writel(cfg | 0x100, BMIPS_RAC_CONFIG);
+ __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
__raw_readl(cbr + BMIPS_RAC_CONFIG);
cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
- __raw_writel(cfg | 0xf, BMIPS_RAC_CONFIG);
+ __raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG);
__raw_readl(cbr + BMIPS_RAC_CONFIG);
cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 7c62967d672c..59247af5fd45 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -646,6 +646,16 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
hnow_v = hpte_new_to_old_v(hnow_v, hnow_r);
hnow_r = hpte_new_to_old_r(hnow_r);
}
+
+ /*
+ * If the HPT is being resized, don't update the HPTE,
+ * instead let the guest retry after the resize operation is complete.
+ * The synchronization for hpte_setup_done test vs. set is provided
+ * by the HPTE lock.
+ */
+ if (!kvm->arch.hpte_setup_done)
+ goto out_unlock;
+
if ((hnow_v & ~HPTE_V_HVLOCK) != hpte[0] || hnow_r != hpte[1] ||
rev->guest_rpte != hpte[2])
/* HPTE has been changed under us; let the guest retry */
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 73bf1ebfa78f..8d43cf205d34 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2705,11 +2705,14 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
* Hard-disable interrupts, and check resched flag and signals.
* If we need to reschedule or deliver a signal, clean up
* and return without going into the guest(s).
+ * If the hpte_setup_done flag has been cleared, don't go into the
+ * guest because that means a HPT resize operation is in progress.
*/
local_irq_disable();
hard_irq_disable();
if (lazy_irq_pending() || need_resched() ||
- recheck_signals(&core_info)) {
+ recheck_signals(&core_info) ||
+ (!kvm_is_radix(vc->kvm) && !vc->kvm->arch.hpte_setup_done)) {
local_irq_enable();
vc->vcore_state = VCORE_INACTIVE;
/* Unlock all except the primary vcore */
@@ -3078,7 +3081,7 @@ out:
static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
{
- int n_ceded, i;
+ int n_ceded, i, r;
struct kvmppc_vcore *vc;
struct kvm_vcpu *v;
@@ -3132,6 +3135,20 @@ static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
while (vcpu->arch.state == KVMPPC_VCPU_RUNNABLE &&
!signal_pending(current)) {
+ /* See if the HPT and VRMA are ready to go */
+ if (!kvm_is_radix(vcpu->kvm) &&
+ !vcpu->kvm->arch.hpte_setup_done) {
+ spin_unlock(&vc->lock);
+ r = kvmppc_hv_setup_htab_rma(vcpu);
+ spin_lock(&vc->lock);
+ if (r) {
+ kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+ kvm_run->fail_entry.hardware_entry_failure_reason = 0;
+ vcpu->arch.ret = r;
+ break;
+ }
+ }
+
if (vc->vcore_state == VCORE_PREEMPT && vc->runner == NULL)
kvmppc_vcore_end_preempt(vc);
@@ -3249,13 +3266,6 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
/* Order vcpus_running vs. hpte_setup_done, see kvmppc_alloc_reset_hpt */
smp_mb();
- /* On the first time here, set up HTAB and VRMA */
- if (!kvm_is_radix(vcpu->kvm) && !vcpu->kvm->arch.hpte_setup_done) {
- r = kvmppc_hv_setup_htab_rma(vcpu);
- if (r)
- goto out;
- }
-
flush_all_to_thread(current);
/* Save userspace EBB and other register values */
@@ -3303,7 +3313,6 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
}
mtspr(SPRN_VRSAVE, user_vrsave);
- out:
vcpu->arch.state = KVMPPC_VCPU_NOTREADY;
atomic_dec(&vcpu->kvm->arch.vcpus_running);
return r;
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 236999c54edc..c60922a66385 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -22,7 +22,7 @@ obj-y += common.o
obj-y += rdrand.o
obj-y += match.o
obj-y += bugs.o
-obj-y += aperfmperf.o
+obj-$(CONFIG_CPU_FREQ) += aperfmperf.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_X86_FEATURE_NAMES) += capflags.o powerflags.o
diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c
index 957813e0180d..0ee83321a313 100644
--- a/arch/x86/kernel/cpu/aperfmperf.c
+++ b/arch/x86/kernel/cpu/aperfmperf.c
@@ -42,6 +42,10 @@ static void aperfmperf_snapshot_khz(void *dummy)
s64 time_delta = ktime_ms_delta(now, s->time);
unsigned long flags;
+ /* Don't bother re-computing within the cache threshold time. */
+ if (time_delta < APERFMPERF_CACHE_THRESHOLD_MS)
+ return;
+
local_irq_save(flags);
rdmsrl(MSR_IA32_APERF, aperf);
rdmsrl(MSR_IA32_MPERF, mperf);
@@ -70,7 +74,6 @@ static void aperfmperf_snapshot_khz(void *dummy)
unsigned int arch_freq_get_on_cpu(int cpu)
{
- s64 time_delta;
unsigned int khz;
if (!cpu_khz)
@@ -79,12 +82,6 @@ unsigned int arch_freq_get_on_cpu(int cpu)
if (!static_cpu_has(X86_FEATURE_APERFMPERF))
return 0;
- /* Don't bother re-computing within the cache threshold time. */
- time_delta = ktime_ms_delta(ktime_get(), per_cpu(samples.time, cpu));
- khz = per_cpu(samples.khz, cpu);
- if (khz && time_delta < APERFMPERF_CACHE_THRESHOLD_MS)
- return khz;
-
smp_call_function_single(cpu, aperfmperf_snapshot_khz, NULL, 1);
khz = per_cpu(samples.khz, cpu);
if (khz)
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 4378a729b933..6b7e17bf0b71 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -78,11 +78,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "microcode\t: 0x%x\n", c->microcode);
if (cpu_has(c, X86_FEATURE_TSC)) {
- unsigned int freq = arch_freq_get_on_cpu(cpu);
+ unsigned int freq = cpufreq_quick_get(cpu);
if (!freq)
- freq = cpufreq_quick_get(cpu);
- if (!freq)
freq = cpu_khz;
seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
freq / 1000, (freq % 1000));
diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
index 16c5f37933a2..0286327e65fa 100644
--- a/arch/x86/mm/mem_encrypt.c
+++ b/arch/x86/mm/mem_encrypt.c
@@ -40,7 +40,7 @@ static char sme_cmdline_off[] __initdata = "off";
* section is later cleared.
*/
u64 sme_me_mask __section(.data) = 0;
-EXPORT_SYMBOL_GPL(sme_me_mask);
+EXPORT_SYMBOL(sme_me_mask);
/* Buffer used for early in-place encryption by BSP, no locking needed */
static char sme_early_buffer[PAGE_SIZE] __aligned(PAGE_SIZE);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.