diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/powerpc/include/asm/opal.h | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/Makefile | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/opal-irqchip.c | 253 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/opal.c | 78 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/powernv.h | 4 |
5 files changed, 273 insertions, 67 deletions
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index dcdf83c86256..1412814347ba 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -243,6 +243,7 @@ extern void opal_msglog_init(void); extern int opal_async_comp_init(void); extern int opal_sensor_init(void); extern int opal_hmi_handler_init(void); +extern int opal_event_init(void); extern int opal_machine_check(struct pt_regs *regs); extern bool opal_mce_check_early_recovery(struct pt_regs *regs); @@ -254,6 +255,8 @@ extern int opal_resync_timebase(void); extern void opal_lpc_init(void); +extern int opal_event_request(unsigned int opal_event_nr); + struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr, unsigned long vmalloc_size); void opal_free_sg_list(struct opal_sg_list *sg); diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index bee923585afc..26bd7e417b7c 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -1,7 +1,7 @@ obj-y += setup.o opal-wrappers.o opal.o opal-async.o idle.o obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o -obj-y += opal-msglog.o opal-hmi.o opal-power.o +obj-y += opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c new file mode 100644 index 000000000000..bd5125dcf0d7 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-irqchip.c @@ -0,0 +1,253 @@ +/* + * This file implements an irqchip for OPAL events. Whenever there is + * an interrupt that is handled by OPAL we get passed a list of events + * that Linux needs to do something about. These basically look like + * interrupts to Linux so we implement an irqchip to handle them. + * + * Copyright Alistair Popple, IBM Corporation 2014. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/bitops.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqdomain.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/kthread.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/irq_work.h> + +#include <asm/machdep.h> +#include <asm/opal.h> + +#include "powernv.h" + +/* Maximum number of events supported by OPAL firmware */ +#define MAX_NUM_EVENTS 64 + +struct opal_event_irqchip { + struct irq_chip irqchip; + struct irq_domain *domain; + unsigned long mask; +}; +static struct opal_event_irqchip opal_event_irqchip; + +static unsigned int opal_irq_count; +static unsigned int *opal_irqs; + +static void opal_handle_irq_work(struct irq_work *work); +static __be64 last_outstanding_events; +static struct irq_work opal_event_irq_work = { + .func = opal_handle_irq_work, +}; + +static void opal_event_mask(struct irq_data *d) +{ + clear_bit(d->hwirq, &opal_event_irqchip.mask); +} + +static void opal_event_unmask(struct irq_data *d) +{ + set_bit(d->hwirq, &opal_event_irqchip.mask); + + opal_poll_events(&last_outstanding_events); + if (last_outstanding_events & opal_event_irqchip.mask) + /* Need to retrigger the interrupt */ + irq_work_queue(&opal_event_irq_work); +} + +static int opal_event_set_type(struct irq_data *d, unsigned int flow_type) +{ + /* + * For now we only support level triggered events. The irq + * handler will be called continuously until the event has + * been cleared in OPAL. + */ + if (flow_type != IRQ_TYPE_LEVEL_HIGH) + return -EINVAL; + + return 0; +} + +static struct opal_event_irqchip opal_event_irqchip = { + .irqchip = { + .name = "OPAL EVT", + .irq_mask = opal_event_mask, + .irq_unmask = opal_event_unmask, + .irq_set_type = opal_event_set_type, + }, + .mask = 0, +}; + +static int opal_event_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, &opal_event_irqchip); + irq_set_chip_and_handler(irq, &opal_event_irqchip.irqchip, + handle_level_irq); + + return 0; +} + +void opal_handle_events(uint64_t events) +{ + int virq, hwirq = 0; + u64 mask = opal_event_irqchip.mask; + u64 notifier_mask = 0; + + if (!in_irq() && (events & mask)) { + last_outstanding_events = events; + irq_work_queue(&opal_event_irq_work); + return; + } + + while (events) { + hwirq = fls64(events) - 1; + virq = irq_find_mapping(opal_event_irqchip.domain, + hwirq); + if (virq) { + if (BIT_ULL(hwirq) & mask) + generic_handle_irq(virq); + } else + notifier_mask |= BIT_ULL(hwirq); + events &= ~BIT_ULL(hwirq); + } + + opal_do_notifier(notifier_mask); +} + +static irqreturn_t opal_interrupt(int irq, void *data) +{ + __be64 events; + + opal_handle_interrupt(virq_to_hw(irq), &events); + opal_handle_events(be64_to_cpu(events)); + + return IRQ_HANDLED; +} + +static void opal_handle_irq_work(struct irq_work *work) +{ + opal_handle_events(be64_to_cpu(last_outstanding_events)); +} + +static int opal_event_match(struct irq_domain *h, struct device_node *node) +{ + return h->of_node == node; +} + +static int opal_event_xlate(struct irq_domain *h, struct device_node *np, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + *out_hwirq = intspec[0]; + *out_flags = IRQ_TYPE_LEVEL_HIGH; + + return 0; +} + +static const struct irq_domain_ops opal_event_domain_ops = { + .match = opal_event_match, + .map = opal_event_map, + .xlate = opal_event_xlate, +}; + +void opal_event_shutdown(void) +{ + unsigned int i; + + /* First free interrupts, which will also mask them */ + for (i = 0; i < opal_irq_count; i++) { + if (opal_irqs[i]) + free_irq(opal_irqs[i], NULL); + opal_irqs[i] = 0; + } +} + +int __init opal_event_init(void) +{ + struct device_node *dn, *opal_node; + const __be32 *irqs; + int i, irqlen, rc = 0; + + opal_node = of_find_node_by_path("/ibm,opal"); + if (!opal_node) { + pr_warn("opal: Node not found\n"); + return -ENODEV; + } + + /* If dn is NULL it means the domain won't be linked to a DT + * node so therefore irq_of_parse_and_map(...) wont work. But + * that shouldn't be problem because if we're running a + * version of skiboot that doesn't have the dn then the + * devices won't have the correct properties and will have to + * fall back to the legacy method (opal_event_request(...)) + * anyway. */ + dn = of_find_compatible_node(NULL, NULL, "ibm,opal-event"); + opal_event_irqchip.domain = irq_domain_add_linear(dn, MAX_NUM_EVENTS, + &opal_event_domain_ops, &opal_event_irqchip); + of_node_put(dn); + if (!opal_event_irqchip.domain) { + pr_warn("opal: Unable to create irq domain\n"); + rc = -ENOMEM; + goto out; + } + + /* Get interrupt property */ + irqs = of_get_property(opal_node, "opal-interrupts", &irqlen); + opal_irq_count = irqs ? (irqlen / 4) : 0; + pr_debug("Found %d interrupts reserved for OPAL\n", opal_irq_count); + + /* Install interrupt handlers */ + opal_irqs = kcalloc(opal_irq_count, sizeof(*opal_irqs), GFP_KERNEL); + for (i = 0; irqs && i < opal_irq_count; i++, irqs++) { + unsigned int irq, virq; + + /* Get hardware and virtual IRQ */ + irq = be32_to_cpup(irqs); + virq = irq_create_mapping(NULL, irq); + if (virq == NO_IRQ) { + pr_warn("Failed to map irq 0x%x\n", irq); + continue; + } + + /* Install interrupt handler */ + rc = request_irq(virq, opal_interrupt, 0, "opal", NULL); + if (rc) { + irq_dispose_mapping(virq); + pr_warn("Error %d requesting irq %d (0x%x)\n", + rc, virq, irq); + continue; + } + + /* Cache IRQ */ + opal_irqs[i] = virq; + } + +out: + of_node_put(opal_node); + return rc; +} + +/** + * opal_event_request(unsigned int opal_event_nr) - Request an event + * @opal_event_nr: the opal event number to request + * + * This routine can be used to find the linux virq number which can + * then be passed to request_irq to assign a handler for a particular + * opal event. This should only be used by legacy devices which don't + * have proper device tree bindings. Most devices should use + * irq_of_parse_and_map() instead. + */ +int opal_event_request(unsigned int opal_event_nr) +{ + return irq_create_mapping(opal_event_irqchip.domain, opal_event_nr); +} +EXPORT_SYMBOL(opal_event_request); diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index eb3decc67c43..3baca718261a 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -53,8 +53,6 @@ static int mc_recoverable_range_len; struct device_node *opal_node; static DEFINE_SPINLOCK(opal_write_lock); -static unsigned int *opal_irqs; -static unsigned int opal_irq_count; static ATOMIC_NOTIFIER_HEAD(opal_notifier_head); static struct atomic_notifier_head opal_msg_notifier_head[OPAL_MSG_TYPE_MAX]; static DEFINE_SPINLOCK(opal_notifier_lock); @@ -251,7 +249,7 @@ int opal_notifier_unregister(struct notifier_block *nb) } EXPORT_SYMBOL_GPL(opal_notifier_unregister); -static void opal_do_notifier(uint64_t events) +void opal_do_notifier(uint64_t events) { unsigned long flags; uint64_t changed_mask; @@ -571,8 +569,10 @@ int opal_handle_hmi_exception(struct pt_regs *regs) local_paca->hmi_event_available = 0; rc = opal_poll_events(&evt); - if (rc == OPAL_SUCCESS && evt) + if (rc == OPAL_SUCCESS && evt) { opal_do_notifier(be64_to_cpu(evt)); + opal_handle_events(be64_to_cpu(evt)); + } return 1; } @@ -609,17 +609,6 @@ out: return !!recover_addr; } -static irqreturn_t opal_interrupt(int irq, void *data) -{ - __be64 events; - - opal_handle_interrupt(virq_to_hw(irq), &events); - - opal_do_notifier(be64_to_cpu(events)); - - return IRQ_HANDLED; -} - static int opal_sysfs_init(void) { opal_kobj = kobject_create_and_add("opal", firmware_kobj); @@ -718,52 +707,15 @@ static void opal_i2c_create_devs(void) of_platform_device_create(np, NULL, NULL); } -static void __init opal_irq_init(struct device_node *dn) -{ - const __be32 *irqs; - int i, irqlen; - - /* Get interrupt property */ - irqs = of_get_property(opal_node, "opal-interrupts", &irqlen); - opal_irq_count = irqs ? (irqlen / 4) : 0; - pr_debug("Found %d interrupts reserved for OPAL\n", opal_irq_count); - if (!opal_irq_count) - return; - - /* Install interrupt handlers */ - opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL); - for (i = 0; irqs && i < opal_irq_count; i++, irqs++) { - unsigned int irq, virq; - int rc; - - /* Get hardware and virtual IRQ */ - irq = be32_to_cpup(irqs); - virq = irq_create_mapping(NULL, irq); - if (virq == NO_IRQ) { - pr_warn("Failed to map irq 0x%x\n", irq); - continue; - } - - /* Install interrupt handler */ - rc = request_irq(virq, opal_interrupt, 0, "opal", NULL); - if (rc) { - irq_dispose_mapping(virq); - pr_warn("Error %d requesting irq %d (0x%x)\n", - rc, virq, irq); - continue; - } - - /* Cache IRQ */ - opal_irqs[i] = virq; - } -} - static int kopald(void *unused) { + __be64 events; + set_freezable(); do { try_to_freeze(); - opal_poll_events(NULL); + opal_poll_events(&events); + opal_handle_events(be64_to_cpu(events)); msleep_interruptible(opal_heartbeat); } while (!kthread_should_stop()); @@ -792,6 +744,9 @@ static int __init opal_init(void) return -ENODEV; } + /* Initialise OPAL events */ + opal_event_init(); + /* Register OPAL consoles if any ports */ if (firmware_has_feature(FW_FEATURE_OPALv2)) consoles = of_find_node_by_path("/ibm,opal/consoles"); @@ -824,9 +779,6 @@ static int __init opal_init(void) /* Setup a heatbeat thread if requested by OPAL */ opal_init_heartbeat(); - /* Find all OPAL interrupts and request them */ - opal_irq_init(opal_node); - /* Create "opal" kobject under /sys/firmware */ rc = opal_sysfs_init(); if (rc == 0) { @@ -857,15 +809,9 @@ machine_subsys_initcall(powernv, opal_init); void opal_shutdown(void) { - unsigned int i; long rc = OPAL_BUSY; - /* First free interrupts, which will also mask them */ - for (i = 0; i < opal_irq_count; i++) { - if (opal_irqs[i]) - free_irq(opal_irqs[i], NULL); - opal_irqs[i] = 0; - } + opal_event_shutdown(); /* * Then sync with OPAL which ensure anything that can diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index 826d2c9bea56..221d4c827fc5 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -35,6 +35,10 @@ extern u32 pnv_get_supported_cpuidle_states(void); extern void pnv_lpc_init(void); +extern void opal_do_notifier(uint64_t events); +extern void opal_handle_events(uint64_t events); +extern void opal_event_shutdown(void); + bool cpu_core_split_required(void); #endif /* _POWERNV_H */ |