diff options
Diffstat (limited to 'drivers/accel/ivpu/ivpu_hw_mtl.c')
| -rw-r--r-- | drivers/accel/ivpu/ivpu_hw_mtl.c | 42 |
1 files changed, 30 insertions, 12 deletions
diff --git a/drivers/accel/ivpu/ivpu_hw_mtl.c b/drivers/accel/ivpu/ivpu_hw_mtl.c index 382ec127be8e..2a5dd3a5dc46 100644 --- a/drivers/accel/ivpu/ivpu_hw_mtl.c +++ b/drivers/accel/ivpu/ivpu_hw_mtl.c @@ -101,6 +101,9 @@ static void ivpu_hw_wa_init(struct ivpu_device *vdev) vdev->wa.punit_disabled = ivpu_is_fpga(vdev); vdev->wa.clear_runtime_mem = false; vdev->wa.d3hot_after_power_off = true; + + if (ivpu_device_id(vdev) == PCI_DEVICE_ID_MTL && ivpu_revision(vdev) < 4) + vdev->wa.interrupt_clear_with_0 = true; } static void ivpu_hw_timeouts_init(struct ivpu_device *vdev) @@ -197,6 +200,11 @@ static void ivpu_pll_init_frequency_ratios(struct ivpu_device *vdev) hw->pll.pn_ratio = clamp_t(u8, fuse_pn_ratio, hw->pll.min_ratio, hw->pll.max_ratio); } +static int ivpu_hw_mtl_wait_for_vpuip_bar(struct ivpu_device *vdev) +{ + return REGV_POLL_FLD(MTL_VPU_HOST_SS_CPR_RST_CLR, AON, 0, 100); +} + static int ivpu_pll_drive(struct ivpu_device *vdev, bool enable) { struct ivpu_hw_info *hw = vdev->hw; @@ -239,6 +247,12 @@ static int ivpu_pll_drive(struct ivpu_device *vdev, bool enable) ivpu_err(vdev, "Timed out waiting for PLL ready status\n"); return ret; } + + ret = ivpu_hw_mtl_wait_for_vpuip_bar(vdev); + if (ret) { + ivpu_err(vdev, "Timed out waiting for VPUIP bar\n"); + return ret; + } } return 0; @@ -256,7 +270,7 @@ static int ivpu_pll_disable(struct ivpu_device *vdev) static void ivpu_boot_host_ss_rst_clr_assert(struct ivpu_device *vdev) { - u32 val = REGV_RD32(MTL_VPU_HOST_SS_CPR_RST_CLR); + u32 val = 0; val = REG_SET_FLD(MTL_VPU_HOST_SS_CPR_RST_CLR, TOP_NOC, val); val = REG_SET_FLD(MTL_VPU_HOST_SS_CPR_RST_CLR, DSS_MAS, val); @@ -754,9 +768,8 @@ static int ivpu_hw_mtl_power_down(struct ivpu_device *vdev) { int ret = 0; - if (ivpu_hw_mtl_reset(vdev)) { + if (!ivpu_hw_mtl_is_idle(vdev) && ivpu_hw_mtl_reset(vdev)) { ivpu_err(vdev, "Failed to reset the VPU\n"); - ret = -EIO; } if (ivpu_pll_disable(vdev)) { @@ -764,8 +777,10 @@ static int ivpu_hw_mtl_power_down(struct ivpu_device *vdev) ret = -EIO; } - if (ivpu_hw_mtl_d0i3_enable(vdev)) - ivpu_warn(vdev, "Failed to enable D0I3\n"); + if (ivpu_hw_mtl_d0i3_enable(vdev)) { + ivpu_err(vdev, "Failed to enter D0I3\n"); + ret = -EIO; + } return ret; } @@ -873,7 +888,7 @@ static void ivpu_hw_mtl_irq_disable(struct ivpu_device *vdev) REGB_WR32(MTL_BUTTRESS_GLOBAL_INT_MASK, 0x1); REGB_WR32(MTL_BUTTRESS_LOCAL_INT_MASK, BUTTRESS_IRQ_DISABLE_MASK); REGV_WR64(MTL_VPU_HOST_SS_ICB_ENABLE_0, 0x0ull); - REGB_WR32(MTL_VPU_HOST_SS_FW_SOC_IRQ_EN, 0x0); + REGV_WR32(MTL_VPU_HOST_SS_FW_SOC_IRQ_EN, 0x0); } static void ivpu_hw_mtl_irq_wdt_nce_handler(struct ivpu_device *vdev) @@ -961,12 +976,15 @@ static u32 ivpu_hw_mtl_irqb_handler(struct ivpu_device *vdev, int irq) schedule_recovery = true; } - /* - * Clear local interrupt status by writing 0 to all bits. - * This must be done after interrupts are cleared at the source. - * Writing 1 triggers an interrupt, so we can't perform read update write. - */ - REGB_WR32(MTL_BUTTRESS_INTERRUPT_STAT, 0x0); + /* This must be done after interrupts are cleared at the source. */ + if (IVPU_WA(interrupt_clear_with_0)) + /* + * Writing 1 triggers an interrupt, so we can't perform read update write. + * Clear local interrupt status by writing 0 to all bits. + */ + REGB_WR32(MTL_BUTTRESS_INTERRUPT_STAT, 0x0); + else + REGB_WR32(MTL_BUTTRESS_INTERRUPT_STAT, status); /* Re-enable global interrupt */ REGB_WR32(MTL_BUTTRESS_GLOBAL_INT_MASK, 0x0); |