diff options
Diffstat (limited to 'drivers/base/regmap')
| -rw-r--r-- | drivers/base/regmap/regmap-debugfs.c | 6 | ||||
| -rw-r--r-- | drivers/base/regmap/regmap-i2c.c | 61 | ||||
| -rw-r--r-- | drivers/base/regmap/regmap-irq.c | 84 | ||||
| -rw-r--r-- | drivers/base/regmap/regmap.c | 23 |
4 files changed, 158 insertions, 16 deletions
diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index e72843fe41df..089e5dc7144a 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -227,6 +227,9 @@ static ssize_t regmap_read_debugfs(struct regmap *map, unsigned int from, if (*ppos < 0 || !count) return -EINVAL; + if (count > (PAGE_SIZE << (MAX_ORDER - 1))) + count = PAGE_SIZE << (MAX_ORDER - 1); + buf = kmalloc(count, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -371,6 +374,9 @@ static ssize_t regmap_reg_ranges_read_file(struct file *file, if (*ppos < 0 || !count) return -EINVAL; + if (count > (PAGE_SIZE << (MAX_ORDER - 1))) + count = PAGE_SIZE << (MAX_ORDER - 1); + buf = kmalloc(count, GFP_KERNEL); if (!buf) return -ENOMEM; diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c index 008f8da69d97..62b95a9212ae 100644 --- a/drivers/base/regmap/regmap-i2c.c +++ b/drivers/base/regmap/regmap-i2c.c @@ -246,6 +246,63 @@ static const struct regmap_bus regmap_i2c_smbus_i2c_block = { .max_raw_write = I2C_SMBUS_BLOCK_MAX, }; +static int regmap_i2c_smbus_i2c_write_reg16(void *context, const void *data, + size_t count) +{ + struct device *dev = context; + struct i2c_client *i2c = to_i2c_client(dev); + + if (count < 2) + return -EINVAL; + + count--; + return i2c_smbus_write_i2c_block_data(i2c, ((u8 *)data)[0], count, + (u8 *)data + 1); +} + +static int regmap_i2c_smbus_i2c_read_reg16(void *context, const void *reg, + size_t reg_size, void *val, + size_t val_size) +{ + struct device *dev = context; + struct i2c_client *i2c = to_i2c_client(dev); + int ret, count, len = val_size; + + if (reg_size != 2) + return -EINVAL; + + ret = i2c_smbus_write_byte_data(i2c, ((u16 *)reg)[0] & 0xff, + ((u16 *)reg)[0] >> 8); + if (ret < 0) + return ret; + + count = 0; + do { + /* Current Address Read */ + ret = i2c_smbus_read_byte(i2c); + if (ret < 0) + break; + + *((u8 *)val++) = ret; + count++; + len--; + } while (len > 0); + + if (count == val_size) + return 0; + else if (ret < 0) + return ret; + else + return -EIO; +} + +static const struct regmap_bus regmap_i2c_smbus_i2c_block_reg16 = { + .write = regmap_i2c_smbus_i2c_write_reg16, + .read = regmap_i2c_smbus_i2c_read_reg16, + .max_raw_read = I2C_SMBUS_BLOCK_MAX, + .max_raw_write = I2C_SMBUS_BLOCK_MAX, +}; + static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c, const struct regmap_config *config) { @@ -255,6 +312,10 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c, i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) return ®map_i2c_smbus_i2c_block; + else if (config->val_bits == 8 && config->reg_bits == 16 && + i2c_check_functionality(i2c->adapter, + I2C_FUNC_SMBUS_I2C_BLOCK)) + return ®map_i2c_smbus_i2c_block_reg16; else if (config->val_bits == 16 && config->reg_bits == 8 && i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA)) diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index 3d64c9331a82..4340e1d268b6 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -541,8 +541,9 @@ static const struct irq_domain_ops regmap_domain_ops = { }; /** - * regmap_add_irq_chip() - Use standard regmap IRQ controller handling + * regmap_add_irq_chip_np() - Use standard regmap IRQ controller handling * + * @np: The device_node where the IRQ domain should be added to. * @map: The regmap for the device. * @irq: The IRQ the device uses to signal interrupts. * @irq_flags: The IRQF_ flags to use for the primary interrupt. @@ -556,9 +557,10 @@ static const struct irq_domain_ops regmap_domain_ops = { * register cache. The chip driver is responsible for restoring the * register values used by the IRQ controller over suspend and resume. */ -int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, - int irq_base, const struct regmap_irq_chip *chip, - struct regmap_irq_chip_data **data) +int regmap_add_irq_chip_np(struct device_node *np, struct regmap *map, int irq, + int irq_flags, int irq_base, + const struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data) { struct regmap_irq_chip_data *d; int i; @@ -769,12 +771,10 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, } if (irq_base) - d->domain = irq_domain_add_legacy(map->dev->of_node, - chip->num_irqs, irq_base, 0, - ®map_domain_ops, d); + d->domain = irq_domain_add_legacy(np, chip->num_irqs, irq_base, + 0, ®map_domain_ops, d); else - d->domain = irq_domain_add_linear(map->dev->of_node, - chip->num_irqs, + d->domain = irq_domain_add_linear(np, chip->num_irqs, ®map_domain_ops, d); if (!d->domain) { dev_err(map->dev, "Failed to create IRQ domain\n"); @@ -808,6 +808,30 @@ err_alloc: kfree(d); return ret; } +EXPORT_SYMBOL_GPL(regmap_add_irq_chip_np); + +/** + * regmap_add_irq_chip() - Use standard regmap IRQ controller handling + * + * @map: The regmap for the device. + * @irq: The IRQ the device uses to signal interrupts. + * @irq_flags: The IRQF_ flags to use for the primary interrupt. + * @irq_base: Allocate at specific IRQ number if irq_base > 0. + * @chip: Configuration for the interrupt controller. + * @data: Runtime data structure for the controller, allocated on success. + * + * Returns 0 on success or an errno on failure. + * + * This is the same as regmap_add_irq_chip_np, except that the device + * node of the regmap is used. + */ +int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, + int irq_base, const struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data) +{ + return regmap_add_irq_chip_np(map->dev->of_node, map, irq, irq_flags, + irq_base, chip, data); +} EXPORT_SYMBOL_GPL(regmap_add_irq_chip); /** @@ -875,9 +899,10 @@ static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data) } /** - * devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip() + * devm_regmap_add_irq_chip_np() - Resource manager regmap_add_irq_chip_np() * * @dev: The device pointer on which irq_chip belongs to. + * @np: The device_node where the IRQ domain should be added to. * @map: The regmap for the device. * @irq: The IRQ the device uses to signal interrupts * @irq_flags: The IRQF_ flags to use for the primary interrupt. @@ -890,10 +915,11 @@ static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data) * The ®map_irq_chip_data will be automatically released when the device is * unbound. */ -int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq, - int irq_flags, int irq_base, - const struct regmap_irq_chip *chip, - struct regmap_irq_chip_data **data) +int devm_regmap_add_irq_chip_np(struct device *dev, struct device_node *np, + struct regmap *map, int irq, int irq_flags, + int irq_base, + const struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data) { struct regmap_irq_chip_data **ptr, *d; int ret; @@ -903,8 +929,8 @@ int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq, if (!ptr) return -ENOMEM; - ret = regmap_add_irq_chip(map, irq, irq_flags, irq_base, - chip, &d); + ret = regmap_add_irq_chip_np(np, map, irq, irq_flags, irq_base, + chip, &d); if (ret < 0) { devres_free(ptr); return ret; @@ -915,6 +941,32 @@ int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq, *data = d; return 0; } +EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip_np); + +/** + * devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip() + * + * @dev: The device pointer on which irq_chip belongs to. + * @map: The regmap for the device. + * @irq: The IRQ the device uses to signal interrupts + * @irq_flags: The IRQF_ flags to use for the primary interrupt. + * @irq_base: Allocate at specific IRQ number if irq_base > 0. + * @chip: Configuration for the interrupt controller. + * @data: Runtime data structure for the controller, allocated on success + * + * Returns 0 on success or an errno on failure. + * + * The ®map_irq_chip_data will be automatically released when the device is + * unbound. + */ +int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq, + int irq_flags, int irq_base, + const struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data) +{ + return devm_regmap_add_irq_chip_np(dev, map->dev->of_node, map, irq, + irq_flags, irq_base, chip, data); +} EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip); /** diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 59f911e57719..c472f624382d 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -827,6 +827,7 @@ struct regmap *__regmap_init(struct device *dev, } else if (!bus->read || !bus->write) { map->reg_read = _regmap_bus_reg_read; map->reg_write = _regmap_bus_reg_write; + map->reg_update_bits = bus->reg_update_bits; map->defer_caching = false; goto skip_format_initialization; @@ -2936,6 +2937,28 @@ int regmap_update_bits_base(struct regmap *map, unsigned int reg, } EXPORT_SYMBOL_GPL(regmap_update_bits_base); +/** + * regmap_test_bits() - Check if all specified bits are set in a register. + * + * @map: Register map to operate on + * @reg: Register to read from + * @bits: Bits to test + * + * Returns -1 if the underlying regmap_read() fails, 0 if at least one of the + * tested bits is not set and 1 if all tested bits are set. + */ +int regmap_test_bits(struct regmap *map, unsigned int reg, unsigned int bits) +{ + unsigned int val, ret; + + ret = regmap_read(map, reg, &val); + if (ret) + return ret; + + return (val & bits) == bits; +} +EXPORT_SYMBOL_GPL(regmap_test_bits); + void regmap_async_complete_cb(struct regmap_async *async, int ret) { struct regmap *map = async->map; |